Multiple-angle Incidence Resolution Spectrometry Research Articles

Preparation of Highly-Ordered Tetrabenzorporphyrin Films Controlled by Supramolecular Assemblies and Precursor Approach

The control of the orientation and packing structures of small organic semiconductor molecules is the important issue for the improvement of charge carrier mobilities of organic field effect transistors. Tetrabenzoporphyrin (BP) is one of the promising p-type organic semiconductors but solubility in organic solvents is very low. We have developed a precursor approach, where a spun-cast film of soluble precursor, tetra-bicyclo[2.2.2]octadiene-fused porphyrin (CP), was heated to obtain BP crystalline film by in-situ retro-Diels–Alder reaction. However, the obtained BP film is a polycrystalline film and the field-effect transistors (FETs) hole mobilities were 10-1~10-2 cm2V-1s-1[1]. Recently, we reported the effect of alkyl substituents at 5,15-positions of BP for the control of the molecular arrangement. The best performance of OFET hole mobility of 5,15-disubstituted BP was 4.1 cm2V-1s-1 [2, 3].A supramolecular strategy has attracted attentions as the effective method for the control of molecular arrangement in films. We applied the combination of supramolecular assembling method and the precursor approach to prepare well-ordered BP films. 5,15-Bis(p-dodecylamidephenyl)-CP was deposited on the substrate by drop-casting, spin-coating or dip-coating method, followed by the heating to 200 ºC for 10 min to give the corresponding 5,15-bis(p-dodecylamidephenyl)-BP films. The film morphologies of the BP were compared with 5,15-bis(p-dodecyloxyphenyl)-BP, which doesn’t include amide moieties for hydrogen-bonding, using UV-vis absorption spectroscopy, atomic force microscopy (AFM), X-ray diffraction (XRD) analysis, and p-polarized multiple-angle incidence resolution spectrometry (p-MAIRS) to clarify the effect of amide groups. OFET performance of the BPs will be also discussed to clarify the effect of intermolecular hydrogen bonding interaction.

Infrared Band Strengths of Dangling OH Features in Amorphous Water at 20 K

Infrared (IR) spectra of vapor-deposited amorphous water at low temperatures show two weak peaks at around 3720 and 3696 cm−1 assigned to free-OH stretching modes of two- and three-coordinated water molecules (so-called “dangling” OH bonds), respectively, on the ice surface. A recent JWST observation first succeeded in detection of a potential dangling OH feature at 3664 cm−1 for ices in molecular clouds, highlighting the importance of dangling OH bonds in interstellar ice chemistry. A lack of band strengths of these features at low temperatures restricts the quantification of dangling OH bonds from IR spectra, hindering development of a molecular-level understanding of the surface structure and chemistry of ice. Using IR multiple-angle incidence resolution spectrometry, we quantified the band strengths of two- and three-coordinated dangling OH features in amorphous water at 20 K as being 4.6 ± 1.6 × 10−18 and 9.1 ± 1.0 × 10−18 cm molecule−1, respectively. These values are more than an order of magnitude lower than band strengths of bulk-water molecules in ice and liquid water and are similar to those of H2O monomers confined in solid matrices. Adsorption of carbon monoxide with dangling OH bonds results in the appearance of a new broad dangling OH feature at 3680–3620 cm−1, with a band strength of 1.8 ± 0.1 × 10−17 cm molecule−1. The band strengths of dangling OH features determined in this study advance our understanding of the surface structure of interstellar ice analogs and recent IR observations of the JWST.

Phonon modes controlled by primary chemical structure of partially fluorinated dimyristoylphosphatidylcholine (DMPC) revealed by multiple-angle incidence resolution spectrometry (MAIRS).

Partially fluorinated dimyristoylphosphatidylcholines (DMPCs) involving double alkyl chains are employed to control the phonon generation in thin films, which is examined by infrared (IR) spectroscopy coupled with multiple-angle incidence resolution spectrometry (MAIRS). technique. Compounds having perfluoroalkyl (Rf) chains are known to exhibit phonon bands in IR spectra because of the strong dipole-dipole interactions. Since the phonon bands of an organic matter have a similar shape to the normal absorption bands, however, recognition of the phonon modes is difficult and confusing for IR spectroscopists. Here, we show that MAIRS works out for finding phonon modes in monolayers: the Berreman shift is readily captured by the MAIRS in-plane and out-of-plane (OP) spectra. By measuring the longitudinal-optic (LO) energy-loss function spectrum of a bulk sample, the degree of molecular aggregation in the monolayer is also revealed by comparing the OP spectrum of the monolayer to the LO one. In addition, partially fluorinated DMPC compounds having both hydrocarbon and Rf chains are prepared, and they are used to obstruct the self-aggregation of the Rf groups in the film. As a result, the phonon characteristics are mostly lost in the MAIRS spectra as expected.

Quantitative Analysis of Photochemical Reactions in Pentacene Precursor Films.

On-surface reactions are rapidly gaining attention as a chemical technique for synthesizing organic functional materials, such as graphene nanoribbons and molecular semiconductors. Quantitative analysis of such reactions is essential for fabricating high-quality film structures, but until our recent work using p-polarized multiple-angle incidence resolution spectrometry (pMAIRS), no analytical technique is available to quantify the reaction rate. In the present study, the pMAIRS technique is employed to analyze the photochemical reaction from 6,13-dihydro-6,13-ethanopentacene-15,16-dione to pentacene in thin films. The spectral analysis on a pMAIRS principle readily reveals the photoconversion rate accurately without other complicated calculations. Thus, this study underlines that the pMAIRS technique is a powerful tool for quantitative analysis of on-surface reactions, as well as molecular orientation.

Insights on the Molecular Orientation of Oligo(p-phenylene vinylene) Derivatives with Alkyl Chains in Langmuir Films

One of the oligo(p-phenylene vinylene) derivatives having alkyl chains, OPV-1, is known to form characteristic rod-shaped nanoaggregates on the water surface, and thin films with aligned nanoaggregates can be obtained by the Langmuir–Blodgett (LB) technique. Although the molecular aggregation and orientation of the “conjugated rings part” in the LB films have already been investigated, analysis of the detailed molecular structure involving the “alkyl chains” is left behind. In the present study, to reveal the role of the alkyl chains in the molecular aggregation in Langmuir films prior to the LB transfer, infrared (IR) external reflection spectroscopic measurements on the water surface are carried out. It has been revealed that not only the conjugated rings of OPV-1 but also the alkyl chains with an ordered conformation are lying on the water surface. The characteristic orientation is found to be kept on a solid substrate even after the LB transfer by IR p-polarized multiple-angle incidence resolution spectrometry (pMAIRS). In addition, pMAIRS was first employed for analyses of the biaxial orientation in the LB films, and the molecular orientations for the conjugated rings and the alkyl chains were quantitatively evaluated from both in-plane and out-of-plane perspectives.

(Invited) Metalation Effect on Diketopyrrolopyrrole-Tetrabenzoporphyrin Conjugate As p-Type Material in BHJ Organic Photovoltaics

Organic photovoltaics have attracted much attention for the next generation of photovoltaics. Tetrabenzoporphyrin (BP) is a p-type organic semiconductor characterized as the large, rigid p-framework, excellent stability, and good photoabsorption capability. Because of the low solubility, thermal precursor approach is necessary for the deposition of BP by solution process, where a soluble precursor (CP) of BP is spin-coated on the substrate, followed by annealing of CP film to make BP film by in-situ retro-Diels-Alder reaction of CP.[1,2] In 2017, we reported side-chain engineering for efficient photocurrent generation using a series of diketopyrrolopyrrole (DPP)–tetrabenzoporphyrin (BP) conjugates named Cn-DPP–BP (n = 4, 6, 8 or 10 depending on the length of n-alkyl groups on the DPP unit) as p-type materials in BHJ OPVs in combination with PC61BM as a n-type material by the thermal precursor approach.[3] The comparative study shows that the short-circuit current density largely depends on the length of alkyl substituents, ranging from 0.88 mA cm-2 with C10-DPP–BP to 15.2 mA cm-2 with C4-DPP–BP. C10-DPP–BP in the film is edge-on orientation dominant while that of C4-DPP–BP is face-on orientation dominant.Encouraged with the results, we synthesized a zinc complex of C4-DPP-CP (C4-DPP-ZnCP) as a soluble precursor of C4-DPP-ZnBP to investigate the effect of metalation of the porphyrin cavity for the BHJ OPV performance. BHJ OPV was prepared by thermal precursor approach: spin-coating of a mixed solution of the precursor, C4-DPP-ZnCP, and PC61BM, followed by annealing at 200 ºC to make a blend film of C4-DPP-ZnBP and PC61BM. Interestingly, the energy gap and ionization potential of C4-DPP-ZnBP film and C4-DPP-BP film are similar to each other, but the Jsc of C4-DPP-ZnBP is 1.5 times larger than that of C4-DPP-BP. We will discuss the relationship between film morphology and OPV performance by studying the blend film of C4-DPP-ZnBP/PC61BM by atomic force microscopy (AFM), X-ray diffraction (XRD) analysis and p-polarized multiple-angle incidence resolution spectrometry (p-MAIRS).References H. Yamada, T. Okujima, N. Ono, Chem. Commun. 2008, 2957-2974. H. Yamada, D. Kuzuhara, M. Suzuki, H. Hayashi, N. Aratani, Bull. Chem. Soc. Jpn. 2020, 93, 1234-1267. K. Takahashi, D. Kumagai, N. Yamada, D. Kuzuhara, Y. Yamaguchi, N. Aratani, T. Koganezawa, S. Koshika, N. Yoshimoto, S. Masuo, M. Suzuki, K. Nakayama, H. Yamada, J. Mater. Chem. A 2017, 5, 14003-14011.

Impact of graphene-molecular interaction on collective orientation barrier for organic film growth

The temperature-dependent molecular orientation variation of pentacene (PEN) on a graphene-covered substrate (PEN/Gr) was investigated via p-polarized multiple-angle incidence resolution spectrometry (pMAIRS). The temperature regime of the orientation transition of PEN/Gr was different from that of PEN/SiO2. The collective orientation barrier (COB), an energy barrier that molecules need to overcome to form a standing orientation, was estimated via pMAIRS. Consequently, the COB of PEN/Gr was found to be 10 times larger than that of PEN/SiO2. This indicated that the COB is valuable for understanding the effect of substrate interaction on molecular orientation.

Absolute Absorption Cross Section and Orientation of Dangling OH Bonds in Water Ice

Abstract The absolute absorption cross section of dangling OH bonds in water ice, a free OH stretch mode by three-coordinated surface water molecules, is derived experimentally as 1.0 ± 0.2 × 10−18 cm2 at 3696 cm−1 for amorphous water at 90 K using infrared multiple-angle incidence resolution spectrometry (IR–MAIRS). The integrated absorption cross section (band strength) of the dangling OH bond at 90 K (1.4 ± 0.3 × 10−17 cm molecule−1 at 3710–3680 cm−1) is found to be more than 1 order of magnitude smaller than those in bulk ice or liquid water. This indicates that a lack of hydrogen-bonding significantly decreases the band strength of dangling OH bonds. The present study also provides average molecular orientations of dangling OH bonds at 10 K and 90 K, because both the surface-parallel (in-plane) and surface-perpendicular (out-of-plane) vibration spectra of dangling OH bonds are quantitatively measured by IR–MAIRS. The intensity ratio of the dangling-OH peaks between in-plane to out-of-plane spectra shows the isotropic nature (random orientation) of the two- and three-coordinated dangling OH bonds in microporous amorphous water prepared at 10 K; however, the three-coordinated dangling OH bonds in nonporous amorphous water prepared at 90 K are dominantly located at the top ice surface and oriented perpendicular to it. These findings provide fundamental insights into the relationship between the structure and optical properties of ice surfaces, and aid quantitative understanding of the surface structure of interstellar ices and their laboratory analogs.

Maximizing Conversion of Surface Click Reactions for Versatile Molecular Modification on Metal Oxide Nanowires.

Click reactions (e.g., Huisgen cycloaddition) on metal oxide nanostructures offer a versatile and robust surface molecular modification for various applications because they form strong covalent bonds in a wide range of molecular substrates. This study reports a rational strategy to maximize the conversion rate of surface click reactions on single-crystalline ZnO nanowires by monitoring the reaction progress. p-Polarized multiple-angle incidence resolution spectrometry (pMAIRS) and Fourier-transformed infrared (FT-IR) spectroscopy were employed to monitor the reaction progress of an azide-terminated self-assembled monolayer (SAM) on single-crystalline ZnO nanowires. Although various reaction parameters including the concentration of Cu(I) catalysts, triazolyl ligands, solvents, and target alkynes were systematically examined for the surface click reactions, 10-30% of terminal azide on the nanowire surface remained unreacted. Temperature-dependent FT-IR measurements revealed that such unreacted residual azides deteriorate the thermal stability of the nanowire molecular layer. To overcome this observed conversion limitation of click reactions on nanostructure surfaces, we considered the steric hindrance around the closely packed SAM reaction points, then experimented with dispersing the azide moiety into a methyl-terminated SAM. The mixed-SAM method significantly improved the azide conversion rate to almost 100%. This reaction method enables the construction of spatially patterned molecular surface modifications on metal oxide nanowire arrays without detrimental unreacted azide groups.

Quantitative analysis of stereoscopic molecular orientations in thermally reactive and heterogeneous noncrystalline thin films via variable-temperature infrared pMAIRS and GI-XRD

The quantitative estimation of stereoscopic molecular orientations in semicrystalline polymer thin films with characteristic heterogeneous structures is essential for the development of advanced film materials. Grazing-incidence X-ray diffraction (GI-XRD) is a powerful technique used to evaluate the orientational order of crystalline lattices; however, it provides the orientational order of only ordered regions (crystal and glassy liquid crystal regions). In contrast, infrared (IR) p-polarized multiple-angle incidence resolution spectrometry (pMAIRS) can provide the averaged orientational order of overall regions in a film regardless of sample crystallinity. This paper combines variable-temperature (VT) pMAIRS, static GI-XRD and spectroscopic ellipsometry and reports general insight into the molecular orientation mechanism occurring in polymer films revealed through the precise analysis of the structural evolution of linear poly(amic n-alkyl ester), PAE, with different lengths of n-alkyl chains during thermal curing, which involves solvent evaporation and dehydration imidization reactions to form the corresponding polyimide (PI). This combined method clarified that the PAE and PI thin films had a heterogeneous structure consisting of a glassy liquid-crystalline (ordered) region and a nonoriented amorphous region. Furthermore, imidization proceeded faster in the amorphous region than in the ordered (oriented) region. In addition, anomalies of refractive index and birefringence were found by comparing pMAIRS and spectroscopic ellipsometry, although the effect of the side chain length on the molecular orientation of PI was insignificant. The anomalies indicate that an isotropic void structures were generated by the elimination reaction of the side chains and that the volume fraction of voids increased with increasing side chain length. These results demonstrated that the combination of VT-pMAIRS and GI-XRD is a very powerful tool for the in situ structural analyses of noncrystalline (disordered crystal, glassy liquid crystal, and oriented amorphous) thin-film materials ongoing chemical reactions in their components and is inherently applicable to all kinds of interesting polymeric thin-film materials. Thin film aromatic polyimides were quantitatively analyzed by grazing-incidence X-ray diffraction (GI-XRD), variable-temperature infrared p-polarized multiple-angle resolution spectroscopy (VT-pMAIRS), and spectroscopic ellipsometry (SE) methods. Combining VT-pMAIRS and GI-XRD revealed characteristic heterogeneous structures comprising non-oriented amorphous and oriented liquid-crystalline glass regions. Additionally, SE indicated that the film involved anisotropic-shaped void inducing form-birefringence. Such an excess of birefringence can make it difficult to estimate orientational order using birefringence measurement. This methodology presented here will remarkably contribute to general structural analyses of all intriguing thin-film polymers with characteristic heterogeneity.

Collective orientation barrier in growth of organic thin films revealed by pMAIRS

We used $p$-polarized multiple-angle incidence resolution spectrometry (pMAIRS) to investigate a collective orientation barrier (COB) in the growth of organic semiconductor (OSC) films. We demonstrate a temperature-dependent variation in the growth of pentacene (PEN) on $\mathrm{Si}{\mathrm{O}}_{2}$ films as a model system. The molecular orientation varied from lying to standing as the growth temperature increased. This change suggests that the formation of a standing orientation is thermally activated compared with the lying state. The nucleation of standing-oriented islands occurs by molecular self-assembly at sufficiently high temperatures. Conversely, molecules deposit in a flat-lying state at low temperatures owing to hindrance of the kinetic barrier to reorientation from lying to standing states. The COB is defined as a collective energy barrier for the reorientation processes throughout the growth. The COB is quantitatively estimated from an Arrhenius plot of the probability to form a standing orientation, derived from the dichroic ratio measured by pMAIRS. We found that the COB in the growth of PEN on the $\mathrm{Si}{\mathrm{O}}_{2}$ system was approximately 0.02 eV, which is a key parameter for determining the molecular orientation. A quantitative evaluation of the COB will be applicable to other systems and enable effective control over the molecular orientation of OSC films.

Langmuir-Blodgett Films of Chiral Perfluorinated Gelators: Effects of Chirality and Chain Length on Two-Dimensional Behavior

Abstract Surface pressure versus molecular area (π-A) curves were measured on pure water as a subphase for a series of N,N′-diperfluoroalkanoyl-1,2(R,R)-diaminocyclohexanes. A molecule is denoted as RR-CFn, where n is the number of carbon atoms in a perfluoroalkanoyl chain (or n − 2 = the number of difluoromethylene units). The chain length was varied for n = 4, 5, 6, 8, 9, and 10. The results for n = 7 were reported previously. The effects of chain length and optical purity on film formation were investigated. The surface morphology of a film deposited onto a hydrophilic glass plate was observed using an atomic force microscope (AFM). For n = 4, 5, and 6, the floating films were already multilayered before compression and the deposited films were composed of rectangular or rod-like aggregates. For n = 7, 8, 9, and 10, monolayered films were formed and underwent structural transformation upon compression. From the AFM images, the films deposited after the transformation were composed of fiber-like aggregates. For a racemic mixture, no monolayer film was formed, and the film transfer was impossible irrespective of the chain length. p-Polarized infrared multiple angle incidence resolution spectrometry (pMAIRS) measurements were carried out on a film of RR-CF8 deposited onto a silicon wafer to determine the orientation of the composite molecules. The results were compared with the monolayer behavior reported for a compound having a single perfluoroalkyl chain. The relation to their gelation behavior is also discussed.

Quantitative Anisotropic Analysis of Molecular Orientation in Amorphous N2O at 6 K by Infrared Multiple-Angle Incidence Resolution Spectrometry.

The existence of molecular orientational order in nanometer-thick films of molecules has long been implied by surface potential measurements. However, direct quantitative determination of the molecular orientation is challenging, especially for metastable amorphous thin films at low temperatures. This study quantifies molecular orientation in amorphous N2O at 6 K using infrared multiple-angle incidence resolution spectrometry (IR-MAIRS). The intensity ratio of the weak antisymmetric stretching vibration band of the 14N15NO isotopomer between the in-plane and out-of-plane IR-MAIRS spectra provides an average molecular orientation angle of 65° from the surface normal. No discernible change is observed in the orientation angle when a different substrate material is used (Si and Ar) at 6 K or the Si substrate temperature is changed in the range of 6-14 K. This suggests that the transient mobility of N2O during physisorption is key in governing the molecular orientation in amorphous N2O.

Precise structural analysis of polymer materials using synchrotron X-ray scattering and spectroscopic methods

Polymers can exist in many different conformations and exhibit a variety of unique and complicated hierarchical structures, which are dominated mainly by entropy and sometimes by kinetics rather than thermodynamics due to the intrinsic high viscosity, polydispersity, and so on. The physical properties of polymeric materials are determined not only by their primary structures but also by their higher order (hierarchical) structures. Hence, precise determination of the structures at all spatial scales is essential to control the physical properties of polymeric materials. This focus review details the use of various characterization techniques, including variable-temperature (VT) synchrotron (SR) X-ray scattering, VT SR X-ray diffraction, and infrared p-polarized multiple-angle incidence resolution spectrometry (pMAIRS), to determine the structure of fully liquid-crystalline ABA-type triblock copolymers, highly crystalline aromatic polyimides, and thin-film polyimides, respectively. The advantages of these methods are briefly reviewed, and the relationship between the macroscopic physical properties and the inherent microstructure is discussed. Physical properties of polymer materials are deeply related to not only the primary structure but also the higher ordered structure such as periodic structures and molecular orientation. If the target material consists of ordered and non-ordered region, the former structure can be selectively detected by X-ray scattering method, whereas structural information of both the regions is obtained by infrared absorption spectroscopy. Particularly for thin film materials, infrared pMAIRS (p-polarized multiple-angle incidence resolution spectroscopy) and GI-XRD (grazing incidence X-ray diffraction methods are very useful for precise structural analyses.

Simultaneous Analysis of Molecular Orientation and Quantity Change of Constituents in a Thin Film Using pMAIRS.

Spectral analysis using chemometrics is extensively used for quantitative chemical analysis in a mixture, but it works powerfully only when the peak intensity is solely proportional to the quantity of chemical components. In this sense, thin films on a solid substrate are not suitable for chemometric analysis, because the molecular orientation also influences the peak intensity via the surface selection rules. In the present study, this long-term analytical issue has readily been overcome by using p-polarized multiple-angle incidence resolution spectrometry (pMAIRS), which has a characteristic that the in-plane (IP) and out-of-plane (OP) vibrational spectra of a thin-film sample are obtained simultaneously in a common ordinate scale. Thanks to this unique power of pMAIRS, the average of the IP and OP spectra annihilates optical anisotropy, yielding an orientation-free spectrum, which enables us to perform the simultaneous quantitative analysis of both quantity change and molecular orientation of the constituents in a thin film. Now, we are ready to examine chemical reactions quantitatively in a thin film.

PMAIRS Analysis on Chain-End Functionalization of Densely Grafted, Concentrated Polymer Brushes

The degree of chain-end functionality in a densely grafted, concentrated polymer brush is a critical parameter. In this study, p-polarized multiple-angle incidence resolution spectrometry (pMAIRS) ...

Second Generation of Multiple-Angle Incidence Resolution Spectrometry.

Infrared surface spectroscopic techniques commonly have long-term issues that (1) the multiple reflections of light in the substrate yield optical interference fringes in the absorption spectrum and (2) the double modulation of light at the interferometer in a Fourier transform infrared spectrometer makes the water-vapor subtraction impossible. These measurement troubles often disturb the quantitative analysis of chemical bands of the analyte thin film. Multiple-angle incidence resolution spectrometry (MAIRS) is not an exception in this matter, either. In the present study, the long-term common issues have first been resolved by fixing the angle of incidence at a large angle, whereas the polarization angle is changed. With this simple conceptual change of MAIRS, as a result, we are ready for concentrating on spectral analysis only without concerning about the measurement troubles.

Two-Dimensional Film Growth of Zinc Tetraphenylporphyrin with the Aid of Solvent Coordination

Abstract Since the performance of an organic film device largely depends on the molecular arrangement in the film, control of the arrangement is crucial. Low molecular-weight organic semiconductor compounds, however, tend to have the edge-on orientation spontaneously due to crystallization on an inert surface. In fact, orientation control of a high-crystallinity compound is often difficult especially on an inert surface. In the present study, a face-on crystalline thin film of zinc tetraphenylporphyrin (ZnTPP) has readily been obtained on an inert surface by using solvent annealing (SA) with an appropriate solvent, formamide (FA). The prepared film is carefully analyzed by using the infrared (IR) p-polarized multiple-angle incidence resolution spectrometry (pMAIRS) and grazing incidence X-ray diffraction (GIXD) techniques. The measurements show that an FA molecule coordinated on a zinc atom blocks the stacking interaction sites of the porphyrin ring, and instead the side to side interaction between the C–H group of the porphyrin rings and π orbital of the phenyl rings forms a two-dimensional sheet-like structure realizing face-on orientation.

Alternative Face-on Thin Film Structure of Pentacene

Pentacene attracts a great deal of attention as a basic material used in organic thin-film transistors for many years. Pentacene is known to form a highly ordered structure in a thin film, in which the molecular long axis aligns perpendicularly to the substrate surface, i.e., end-on orientation. On the other hand, the face-on oriented thin film, where the molecular plane is parallel to the substrate, has never been found on an inert substrate represented by SiO2. As a result, the face-on orientation has long been believed to be generated only on specific substrates such as a metal single crystal. In the present study, the face-on orientation grown on a SiO2 surface has first been identified by means of visible and infrared p-polarized multiple-angle incidence resolution spectrometry (pMAIRS) together with two-dimensional grazing incidence X-ray diffraction (2D-GIXD). The combination of the multiple techniques readily reveals that the face-on phase is definitely realized as the dominant component. The face-on film is obtained when the film growth is kinetically restricted to be prevented from transforming into the thermodynamically stable structure, i.e., the end-on orientation. This concept is useful for controlling the molecular orientation in general organic semiconductor thin films.

Molecular Orientation Change in Naphthalene Diimide Thin Films Induced by Removal of Thermally Cleavable Substituents

The potential of naphthalene-1,8:4,5-tetracarboxylic diimide (NDI-H) as a transparent electron-transporting material was examined. A soluble precursor was designed and synthesized having two tert-butoxycarbonyl solubilizing substituents at the imide moieties. This precursor molecule, NDI-Boc, is converted to the hydrogen-substituted NDI-H by heating the spin-coated precursor films. The molecular orientation during the thermal conversion of NDI-Boc to NDI-H was examined using two-dimensional grazing incidence X-ray diffraction (2D-GIXD) and p-polarized multiple-angle incidence resolution spectrometry. It was revealed that, driven by the formation of intermolecular hydrogen bonds, the molecular orientation changes from tilted edge-on to face-on orientation. In situ 2D-GIXD measurements confirmed that the change of molecular orientation is simultaneously caused by the cleaving of the Boc substituents. Time-resolved microwave conductivity measurements were used to show that the resulting NDI-H film has anisot...