Multimode Optical Waveguides Research Articles

Epoxy resin multimode optical waveguide fabricated by non-contact photolithography

Multimode polymer waveguides were created using epoxy resin materials. The fabrication process used non-contact photolithography, which is a simple and cost-effective method. During the experiments, a reliable and efficient developer was obtained. The samples were analyzed using scanning electron microscopy and the results showed that the ridge waveguides had a smooth surface and vertical sidewalls. The cross-section size was approximately 50 × 55 μm2. The waveguides had a transmission loss was about 0.08 dB/cm at a wavelength of 850 nm, which was measured using the cut-back method. Additionally, the waveguides were found to be stable in thermal and damp heat conditions.

Integrated multimode optical waveguides in glass using laser induced deep etching.

Glass is an ideal material for optical applications, even though only a few micromachining technologies for material ablation are available. These microstructuring methods are limited regarding precision and freedom of design. A micromachining process for glass is laser induced deep etching (LIDE). Without generating micro-cracks, introducing stress, or other damages, it can precisely machine many types of glass. This work uses LIDE to subtractive manufacture structures in glass carrier substrates. Due to its transmission characteristics and refractive index, the glass substrate serves as optical cladding for polymer waveguides. In this paper, the described fabrication process can be divided into two sub-steps. The doctor blade technique and subsequent additive process step is used in manufacturing cavities with U-shaped cross-sections in glass in order to fill the trenches with liquid optical polymers, which are globally UV-cured. Based on the higher refractive index of the polymer, it enables optical waveguiding in the visible to near-infrared wavelength range. This novel, to the best of our knoowledge, manufacturing method is called LDB (LIDE-doctor-blade); it can be the missing link between long-distance transmissions and on-chip solutions on the packaging level. For validation, optical waveguides are examined regarding their geometrical dimensions, surface roughness, and waveguiding ability, such as intensity distribution and length-dependent attenuation.

Polydimethylsiloxane multimode optical channel waveguides doped with yellow dye fabricated by microdispensing

Polydimethylsiloxane multimode optical channel waveguides doped with yellow dye fabricated by microdispensing

Simulative study on integrated optical multimode waveguides with guided beams based on the system standardization of elements

Abstract This study has outlined simulative study on integrated optical multimode waveguides with guided beams based on the system standardization of elements. Deflection of a cantilever are clarified with a point force at the free end, due to the distributed weight at the beam, with a mass at the free end, and at the free end under acceleration. The bending of a double clamped beam under its distributed weight, deflection with the central mass double clamped beam under its weight, the buckling of a double clamped beam due to a compressive stress, out of plane deflection (OPD) of a bent beam suspension, OPD of a folded beam suspension, and OPD of a serpentine beam suspension are also clarified and reviewed. Dependence of cross section of beam on torsion constant is outlined. The stiffness ratio of lateral to vertical motion of hammock suspension is also clarified. The design of a crab-leg suspension and the dependence of the stiffness on thigh section of the crab leg flexure and the design of a folded flexure suspension and the dependence of stiffness on ratio of column beam lengths are also reported.

Plasmonic-Induced Transparencies in an Integrated Metaphotonic System.

In this contribution, we numerically demonstrate the generation of plasmonic transparency windows in the transmission spectrum of an integrated metaphotonic device. The hybrid photonic–plasmonic structure consists of two rectangular-shaped gold nanoparticles fully embedded in the core of a multimode dielectric optical waveguide, with their major axis aligned to the electric field lines of transverse electric guided modes. We show that these transparencies arise from different phenomena depending on the symmetry of the guided modes. For the TE mode, the quadrupolar and dipolar plasmonic resonances of the nanoparticles are weakly coupled, and the transparency window is due to the plasmonic analogue of electromagnetically induced transparency. For the TE mode, the quadrupolar and dipolar resonances of the nanoparticles are strongly coupled, and the transparency is originated from the classical analogue of the Autler–Townes effect. This analysis contributes to the understanding of plasmonic transparency windows, opening new perspectives in the design of on-chip devices for optical communications, sensing, and signal filtering applications.

Thermalization of Light's Orbital Angular Momentum in Nonlinear Multimode Waveguide Systems.

We show that the orbital angular momentum (OAM) of a light field can be thermalized in a nonlinear cylindrical multimode optical waveguide. We find that upon thermal equilibrium, the maximization of the optical entropy leads to a generalized Rayleigh-Jeans distribution that governs the power modal occupancies with respect to the discrete OAM charge numbers. This distribution is characterized by a temperature that is by nature different from that associated with the longitudinal electromagnetic momentum flow of the optical field. Counterintuitively and in contrast to previous results, we demonstrate that even under positive temperatures, the ground state of the fiber is not always the most populated in terms of power. Instead, because of OAM, the thermalization processes may favor higher-order modes. A new equation of state is derived along with an extended Euler equation resulting from the extensivity of the entropy itself. By monitoring the nonlinear interaction between two multimode optical wave fronts with opposite spins, we show that the exchange of angular momentum is dictated by the difference in OAM temperatures, in full accord with the second law of thermodynamics. The theoretical analysis presented here is corroborated by numerical simulations that take into account the complex nonlinear dynamics of hundreds of modes. Our results may pave the way toward high-power optical sources with controllable orbital angular momenta, and at a more fundamental level, they may open up opportunities in drawing parallels with other complex multimode nonlinear systems like rotating atomic clouds.

Thin-Film Lithium Niobate Based Acousto-Optic Modulation Working at Higher-Order TE1 Mode

Acousto-optic modulation (AOM) is regarded as an effective way to link multi-physical fields on-chip. We propose an on-chip AOM scheme based on the thin-film lithium niobate (TFLN) platform working at the higher-order TE1 mode, rather than the commonly used fundamental TE0 mode. Multi-physical field coupling analyses were carried out to obtain the refractive index change of the optical waveguide (>6.5×10−10 for a single phonon) induced by the enhanced acousto-optic interaction between the acoustic resonator mode and the multimode optical waveguide. By using a Mach-Zehnder interferometer (MZI) structure, the refractive index change is utilized to modulate the output spectrum of the MZI, thus achieving the AOM function. In the proposed AOM scheme, efficient mode conversion between the TE0 and TE1 mode is required in order to ensure that the AOM works at the higher-order TE1 mode in the MZI structure. Our results show that the half-wave-voltage-length product (VπL) is <0.01 V·cm, which is lower than that in some previous reports on AOM and electro-optic modulation (EOM) working at the fundamental TE0 mode (e.g., VπL > 0.04 V·cm for AOM, VπL > 1 V·cm for EOM). Finally, the proposed AOM has lower loss when compared with EOM because the electrode of the AOM can be placed far from the optical waveguide.

Supersymmetry-enhanced stark-chirped rapid-adiabatic-passage in multimode optical waveguides.

We propose a method to efficiently pump an excited mode of a multimode optical waveguide starting from a fundamental-mode input by combining Stark-Chirped Rapid Adiabatic Passage (SCRAP) and Supersymmetry (SUSY) transformations. In a two-waveguide set, we implement SCRAP by modulating the core refractive index of one waveguide, which is evanescently coupled to its SUSY partner. SCRAP provides an efficient transfer of light intensity between the modes of different waveguides, while SUSY allows to control which modes are supported. Using both techniques allows to achieve fidelities above 99% for the pumping of the excited mode of a two-mode waveguide. Additionally, we show that SCRAP can be exploited to spatially separate superpositions of fundamental and excited modes, and how SUSY can also improve the results for this application.

Осаждение планарных волноведущих структур со фторсиликатной оболочкой на кремниевые и кварцевые подложки в локальном СВЧ-разряде пониженного давления.

An efficient method of gas-phase multilayer heterogeneous deposition of quartz and fluorosilicate glass in a non-isothermal plasma of a resonant local low pressure microwave discharge on quartz glass substrates and silicon wafers for the optical structures formation of waveguides and other waveguide elements based on them, is presented. It is shown that the nonisothermal plasma of a resonant local low pressure microwave discharge is an effective tool for the films formation on silicon and quartz substrates, both pure silicon dioxide and doped with fluorine. The cracks presence in films doped with fluorine is not observed even at their considerable thicknesses (20…60 µm). Deposition high rates and efficiency of silica glass doped with fluorine have been achieved (up to 7 wt.% of glass doping with fluorine at a film deposition rate of more than 3 μm/min). Planar and strip multimode and single-mode optical waveguides have been created. They are the basic structures of various fiber-optic components of local information transmission systems.

Optical Polymer Waveguides Fabricated by Roll-to-Plate Nanoimprinting Technique

The paper reports on the properties of UV-curable inorganic-organic hybrid polymer multimode optical channel waveguides fabricated by roll-to-plate (R2P) nanoimprinting. We measured transmission spectra, refractive indices of the applied polymer materials, and optimized the R2P fabrication process. Optical losses of the waveguides were measured by the cut-back method at wavelengths of 532, 650, 850, 1310, and 1550 nm. The lowest optical losses were measured at 850 nm and the lowest average value was 0.19 dB/cm, and optical losses at 1310 nm were 0.42 dB/cm and 0.25 dB/cm at 650 nm respectively. The study has demonstrated that nanoimprinting has great potential for the implementation of optical polymer waveguides not only for optical interconnection applications.

Maskless lithography for versatile and low cost fabrication of polymer based micro optical structures

For applications in optical communication, sensing or information projection in automotive lighting, polymer based optical devices are of keen interest. Optical structures such as waveguides and gratings are basic blocks for these devices. We report on a simple, versatile, and yet low-cost fabrication method suited for both binary and multilevel diffractive microstructures as well as multimode optical waveguides in polymers. The fabrication of the diffractive structures, i.e. gratings, with two and multiple levels, is achieved by using a maskless optical lithography system employing a spatial light modulator. With the same system, waveguide cladding structures are realized by stitching of multiple single exposure patterns. For replication of these structures on polymer, e.g. polymethyl methacrylate (PMMA), a lab-made hot embossing machine is used. We then employ UV curable material and doctor blading to realize the waveguide cores. The created diffractive and waveguide structures are characterized in terms of diffraction efficiency and optical propagation loss, respectively, showing good optical quality and performance. With our fabrication system we have demonstrated a diffraction efficiency of 71% for multilevel grating structure and a propagation loss for stitched waveguides of 2.07 dB/cm at a wavelength of 638 nm. These basic elements will be employed to realize entire optical measurement systems for applications in sensing and integrated photonics in the next step.

Effects of gamma rays on elastomer multimode optical channel waveguides

The paper reports on properties of the elastomer multimode optical channel waveguides. The waveguides were fabricated by the doctor blade technique using the nickel mold with the dimension of the core 50 × 50 µm2 and irradiated by gamma rays from 60Co source with the dose rate 1 kGy/h. The applied irradiations were 14.6 kGy and 33.9 kGy and we studied the influence of gamma rays on the properties of the elastomer waveguides. We measured transmission spectra, refractive indices and the waveguide propagation losses. The lowest values of the optical losses were 0.21 dB/cm at 1310 nm and 0.35 dB/cm at 850 nm in the samples irradiated with dose 14.6 kGy and 0.55 dB/cm at 1310 nm and 0.66 dB/cm at 850 nm for the sample irradiated with a higher dose 33.9 kGy. The average value of the optical losses at 650 nm was 0.78 dB/cm (dose 14.6 kGy) and 1.05 dB/cm (dose 33.9 kGy). Optical silicone elastomers have unique properties and can be used for the realization of the optical waveguides for interconnection or realization photonics structures for applications in extreme environments.

Exceptionally Plastic/Elastic Organic Crystals of a Naphthalidenimine-Boron Complex Show Flexible Optical Waveguide Properties.

The design of molecular compounds that exhibit flexibility is an emerging area of research. Although a fair amount of success has been achieved in the design of plastic or elastic crystals, realizing multidimensional plastic and elastic bending remains challenging. We report herein a naphthalidenimine-boron complex that showed size-dependent dual mechanical bending behavior whereas its parent Schiff base was brittle. Detailed crystallographic and spectroscopic analysis revealed the importance of boron in imparting the interesting mechanical properties. Furthermore, the luminescence of the molecule was turned-on subsequent to boron complexation, thereby allowing it to be explored for multimode optical waveguide applications. Our in-depth study of the size-dependent plastic and elastic bending of the crystals thus provides important insights in molecular engineering and could act as a platform for the development of future smart flexible materials for optoelectronic applications.

Bend- and Twist-Insensitive Flexible Multimode Polymer Optical Interconnects

Polymer multimode optical waveguides can enable high-speed short-reach optical interconnection at low cost within high performance electronic systems. The formation of such waveguides on flexible substrates can offer important additional advantages such as light weight, ability to be tightly bent, and reconfigurability which are particularly important in environments where space, weight, and shape conformity are critical, for instance in vehicles and aircraft. The ability of such flexible optical interconnects to be tightly bent and twisted with low excess loss is crucial in enabling their use in systems with limited space and with movable parts. As a result, in this work, we present a new design of such flexible polymer multimode waveguides that achieves improved bending loss performance over the conventional waveguide design. It is experimentally shown that the proposed design achieves a very low excess loss of 0.5 dB for a 3 mm radius bend under a 50 μm MMF launch. In comparison, flexible waveguides with the conventional design exhibit a 2 dB excess loss under the same launch and bend conditions. Additionally, useful rules that associate the twisting loss performance of flexible polymer waveguide samples with their geometric characteristics are derived. It is shown that negligible twisting losses (<0.1 dB for a 50 μm MMF input) can be achieved when the dimensions of the waveguide samples are appropriately selected. The results demonstrate the strong potential of such bend- and twist-insensitive flexible polymer waveguides for use in next-generation vehicles and aircraft.

Aerosol Jet Printed Optical Waveguides for Short Range Communication

This article presents an innovative way for additive manufacturing of optical multimode waveguides for short range data transmission. By the use of aerosol jet printing between conditioning lines on flexible foils, low cost, and low weight polymer optical waveguides can be easily fabricated. The main advantages – compared to other waveguide manufacturing techniques – are the maximum fabricable waveguide length (not limited by panel- or wafer size), technology costs and 3D-ability. Furthermore, the printing allows for very long structures, which are not limited to wafer or panel sizes. In order to classify the new manufacturing approach and compare it to other technologies such as photolithography, imprinting, dispensing and ion-exchange, results on the mechanical (shear strength) and optical performance (transmittance, near field and attenuation) are presented. In addition, the experimental results on the data transmission performance are important to prove the suitability of the waveguides for high-speed communication applications. In this context, nearly error-free transmission up to 10 Gbit/s was achieved at a wavelength of 850 nm.

Multimode Two-Dimensional PT-Symmetric Waveguides

In this article, we apply a time-dependent Darboux transformation for the construction of PT-symmetric multimode optical waveguides where the non-separable complex fluctuations of the refractive index confine guided modes. We focus on a family of settings based on the hyperbolic Pöschl-Teller potential well. We show that the transformed systems have a “missing” state, an extra guided mode whose analog does not exist in the original system.

Experimental and theoretical study of the formation process of photopolymer based self-written waveguides.

The realization of optical interconnects between multimode (MM) optical fibers and waveguides based on a self-writing process in photopolymer media represents an efficient approach for fast and easy-to-implement connection of light-guiding elements. When light propagates through photopolymer media, it modulates the material properties of the media and confines the spreading of the light beam to create a waveguide along the beam propagation direction. This self-writing process can be realized with a single photopolymer medium and is also suited to connect optical fibers or waveguides with active elements such as light sources and detectors. Numerical simulations of the underlying light-induced polymerization process is carried out by using a diffusion based material model which takes account both monomer diffusion and its conversion to polymer chains in regions exposed to light fields. In this work experimental results obtained from a one-polymer approach are validated with theoretical predictions from the diffusion model. The study involved the demonstration of temporal dynamics and transmittance from self-written waveguide (SWW) couplers during the self-writing process. The measured attenuation coefficient from experiment αexperiment = (8.43 ± 0.3) × 10-5 dB/µm showed good agreement with the theoretically predicted attenuation coefficient αsimulation = 7.93 × 10-5 dB/µm, thus demonstrating a successful application of the diffusion model to epoxy based acrylate SWWs. For comparison, attenuation measurements between optical fibers with SWWs as interconnects and one without SWW, i.e. with an air gap in between, were performed. The obtained results reveal that the theoretical approach correctly describes the waveguide formation process so that in the next step the studies can be extended towards including further relevant parameters such as temperature.

Thermodynamic theory of highly multimoded nonlinear optical systems

The quest for ever higher information capacities has brought about a renaissance in multimode optical waveguide systems. This resurgence of interest has recently initiated a flurry of activities in nonlinear multimode fiber optics. The sheer complexity emerging from the presence of a multitude of nonlinearly interacting modes has led not only to new opportunities in observing a host of novel optical effects that are otherwise impossible in single-mode settings, but also to new theoretical challenges in understanding their collective dynamics. In this Article, we present a consistent thermodynamical framework capable of describing in a universal fashion the exceedingly intricate behavior of such nonlinear highly multimoded photonic configurations at thermal equilibrium. By introducing pertinent extensive variables, we derive new equations of state and show that both the 'internal energy' and optical power in many-mode arrangements always flow in such a way so as to satisfy the second law of thermodynamics. The laws governing isentropic processes are derived and the prospect for realizing Carnot-like cycles is also presented. In addition to shedding light on fundamental issues, our work may pave the way towards a new generation of high power multimode optical structures and could have ramifications in other many-state nonlinear systems, ranging from Bose-Einstein condensates to optomechanics.

Super- and subradiance of clock atoms in multimode optical waveguides

The transversely confined propagating modes of an optical fiber mediate virtually infinite range energy exchanges among atoms placed within their field, which adds to the inherent free space dipole–dipole coupling. Typically, the single atom free space decay rate largely surpasses the emission rate into the guided fiber modes. However, scaling up the atom number as well as the system size amounts to entering a collective emission regime, where fiber-induced superradiant spontaneous emission dominates over free space decay. We numerically study this super- and subradiant decay of highly excited atomic states for one or several transverse fiber modes as present in hollow core fibers. As particular excitation scenarios we compare the decay of a totally inverted state to the case of π/2 pulses applied transversely or along the fiber axis as in standard Ramsey or Rabi interferometry. While a mean field approach fails to correctly describe the initiation of superradiance, a second-order approximation accounting for pairwise atom–atom quantum correlations generally proves sufficient to reliably describe superradiance of ensembles from two to a few hundred particles. In contrast, a full account of subradiance requires the inclusion of all higher order quantum correlations. Considering multiple guided modes introduces a natural effective cut-off for the interaction range emerging from the dephasing of different fiber contributions.

Intermodal group-velocity engineering for broadband nonlinear optics

Interest in the nonlinear properties of multi-mode optical waveguides has seen a recent resurgence on account of the large dimensionality afforded by the platform. The large volume of modes in these waveguides provides a new spatial degree of freedom for phase matching nonlinear optical processes. However, this spatial dimension is quantized, which narrows the conversion bandwidths of intermodal processes and constrains spectral and temporal tailoring of the light. Here we show that by engineering the relative group velocity within the spatial dimension, we can tailor the phase-matching bandwidth of intermodal parametric nonlinearities. We demonstrate group-velocity-tailored parametric nonlinear mixing between higher-order modes in a multi-mode fiber with gain bandwidths that are more than an order of magnitude larger than that previously thought possible for intermodal four-wave mixing. As evidence of the technological utility of this methodology, we seed this process to generate the first high-peak-power wavelength-tunable all-fiber quasi-CW laser in the Ti:sapphire wavelength regime. More generally, with the combination of intermodal interactions, which dramatically expand the phase-matching degrees of freedom for nonlinear optics, and intermodal group-velocity engineering, which enables tailoring of the bandwidth of such interactions, we showcase a platform for nonlinear optics that can be broadband while being wavelength agnostic.