Multimedia Protocols Research Articles

Proposed Prototype for Multimedia Protocol in m-Health to Support a Communication between Patient and Hospital

Rapid advances in wireless communications and networking technologies, linked with advances in computing and medical technologies, facilitate the development and offering of emerging mobile systems and services in the healthcare sector. The objective of this paper is to identify the overview of the current multimedia communication protocols used in m-Health, such as SIP, RTCP, RTSP and RTP; and the challenges of mobile health systems, devices, and services. Also, propose a scenario to support communication between the patient and the hospital. m-Health systems will significantly affect the delivery of patient’s data in an ambulance; however, their exploitation in daily practice remains to be achieved.

A fuzzy-based QoS Maximization protocol for WiFi Multimedia (IEEE 802.11e) Ad hoc Networks

The Quality of Service (QoS) management within a multiple-traffic Wi-Fi MultiMedia (WMM) ad hoc network is a tedious task, since each traffic type requires a well determined QoS-level. For this reason, the IEEE Working Group has proposed the IEEE 802.11e Enhanced Distributed Channel Access (EDCA) protocol at the MAC layer of WMM ad hoc networks. However, several studies have shown that EDCA must be further improved for three main reasons. The first reason is the poor performance of EDCA under high traffic conditions due to the high collision rate. The second reason is the need to maximize the traffic performance (delay, throughput, etc.) guaranteed by EDCA, seen the rapid evolution of the applications (multimedia, real time, etc.). The third reason is the need to maximize the energy efficiency of the EDCA, seen its use in battery constrained devices (e.g. Laptop, Smart phone, Tablet computers, etc.). For these three reasons, we propose in this paper a Three-in-One solution MAC protocol called QoS Maximization of EDCA (QM-EDCA), which is an enhanced version of EDCA. Based on the fuzzy logic mathematic theory, QM-EDCA incorporates a dynamic MAC parameters fuzzy logic system, in order to adapt dynamically the Arbitration inter frame Spaces according to the network state and remaining energy. Simulation results show that QM-EDCA outperforms EDCA by reducing significantly the collision rate, and maximizing traffic performance and energy-efficiency. In addition our solution is fully distributed.

Evaluation of the firewall influence on the session initiation by the SIP multimedia protocol

Firewalls is one of the major components to provide network security. By using firewalls, you can solve such problems as preventing unauthorized access, and deleting, modifying and/or distributing information under protection. The process of information flows filtration by a firewall introduces additional time delays, thus possibly leading to disruption of stable operation of the protected automated system or to inaccessibility of the services provided by the system. Multimedia services are particularly sensitive to service time delays. The main purpose of the work presented in this paper is to evaluate the influence of the firewall on the time delays in data transmission process in the automated system with multimedia data transmission protocols. The evaluation is provided by the queuing theory methods while a session is initiated between two users by the Session Initiation Protocol (SIP) with firewall message filtration. A firewall is a local or functional distributing tool that provides control over the incoming and/or outgoing information in the automated system (AS), and ensures the protection of the AS by filtering the information, i.e., providing analysis of the information by the criteria set and making a decision on its distribution.

Evaluation of firewall performance when ranging a filtration rule set

This article is a continuation of a number of works devoted to evaluation of probabilistic-temporal characteristics of firewalls when ranging a filtration rule set. This work considers a problem of the decrease in the information flow filtering efficiency. The problem emerged due to the use of a sequential scheme for checking the compliance of packets with the rules, as well as due to heterogeneity and variability of network traffic. The order of rules is non-optimal, and this, in the high-dimensional list, significantly influences the firewall performance and also may cause a considerable time delay and variation in values of packet service time, which is essentially important for the stable functioning of multimedia protocols. One of the ways to prevent decrease in the performance is to range a rule set according to the characteristics of the incoming information flows. In this work, the problems to be solved are: determination and analysis of an average filtering time for the traffic of main transmitting networks; and assessing the effectiveness of ranging the rules. A method for ranging a filtration rule set is proposed, and a queuing system with a complex request service discipline is built. A certain order is used to describe how requests are processed in the system. This order includes the execution of operations with incoming packets and the logical structure of filtration rule set. These are the elements of information flow processing in the firewall. Such level of detailing is not complete, but it is sufficient for creating a model. The QS characteristics are obtained with the help of simulation modelling methods in the Simulink environment of the matrix computing system MATLAB. Based on the analysis of the results obtained, we made conclusions about the possibility of increasing the firewall performance by ranging the filtration rules for those traffic scripts that are close to real ones.

Real-Time Streaming Relay Mechanism for P2P Conferences on Hierarchical Overlay Networks

A peer-to-peer (P2P) multimedia conferencing service is operating that users share their resources to each other on the Internet. It can solve the problem in the centralized conferencing architecture, such as the centralized loading, single point error, and expensive infrastructure. However, P2P networks have the problem that a peer has a difference between the physical location and logical location in the overlay network. In the viewpoint of P2P networks, the nearest conference resource may be far away geographically. The P2P-session initiation protocol (P2P-SIP) multimedia conference is to construct an application-based logical multicast network efficiently according to physical network information. Thus, this paper proposes a real-time streaming relay mechanism for P2P conferences on hierarchical overlay networks. The real-time streaming relay mechanism can improve the transportation efficiency of conferencing stream exchange well based on the application-layer multicast (ALM) structure and the hierarchical overlay networks.

WGM: Wavelet-Based Gamma Model for Video Traffic in Wireless Multi-hop Networks

While most of the existing literature concentrates on wireless traffic characterization and its effects on network performance, relatively little research work has focused on mathematical modeling and queuing analysis of video traffic in wireless multi-hop networks. The purpose of this paper is to characterize and model wireless multi-hop network video traffic. We begin with thorough analysis and investigations of characteristics of video traffic in typical wireless network scenarios, building upon which we present a novel Wavelet-based Gamma Model (WGM) for wireless multi-hop video streaming. Our analytic and simulation results demonstrate that the WGM provides a flexible and robust means to characterize wireless video traffic, in terms of statistical properties and self-similarity. On this basis, a WGM queuing system is constructed to deduce the theoretical value of buffer overflow probability, delay and delay jitter for wireless media streaming. A series of simulation experiments are conducted to demonstrate the generality and effectiveness of our modeling approach. Our experimental results show that the probability of buffer overflow indicates a hyperbolic decay as the buffer size increases; however, the buffer overflow probability decays exponentially fast, as the sending rate increases. The study also finds that, as the buffer size increases, the delay and delay jitter of video streaming first increase then become stable, but with an increase in the sending rate, both values decrease sharply. We believe that this conclusion could contribute to the design of appropriate network architectures and to elaborate efficient wireless multimedia communication protocols.

Scalability and Performance Analysis of SIP based Multimedia Services over Mission Critical Communication Systems

Various studies have suggested enhancing the performance of large-scale systems, such as mission critical communication systems (MCCSs). However, few have modelled and evaluated the performance of such systems in a way that targets overall system performance in real time. Moreover, it is not enough to define the Key Performance Indicators (KPIs) for a system without using them for system performance measurement and performance evaluation. The Session Initiation Protocol (SIP) and IP Multimedia Subsystem (IMS) both have a set of KPIs, such as the registration process delay, that can be used to measure and thus optimize overall system performance. This article articulates different options for system simulation and evaluation. The registration process affects performance and reflects the overall system performance. The article shows how the registration process is delayed and how the overall system scalability are negatively impacted by system overload.

IoT-RTP and IoT-RTCP: Adaptive Protocols for Multimedia Transmission over Internet of Things Environments

Recently, the Internet of Things (IoT) has attracted the interest of network researchers all over the world. Multimedia transmission through IoT presents an important challenge owing to nodes diversity. In this paper, adaptive versions of the real-time transport protocol (RTP) and real-time control protocol (RTCP), i.e., IoT-RTP and IoT-RTCP, are proposed. In these versions, the nature of IoT environments, such as transmission channels heterogeneity, sudden change in session size, and different multimedia sources, is considered. The basic idea of the proposed adaptive versions is to divide the large multimedia sessions into simple sessions with awareness of network status. To achieve this target, additional fields are added to the RTP and RTCP headers. These fields work under certain conditions to decrease the network overload. Finally, to test the performance of the proposed IoT-RTP and IoT-RTCP, a simulation environment is constructed using the network simulation package (NS2).The results of intensive simulations proved that the proposed adaptive versions of the multimedia protocols outperform the basic ones in terms of end-to-end delay, delay jitter, number of receiver reports, packet loss, throughput, and energy consumption.

“The Postman Always Rings Twice”: Evaluating E-Learning Platform a Decade Later

E-Learning represents an effective answer to the continuous request for life-long learning. In fact, this approach allows the flexibility and quality requested by such a kind of learning process. In this scenario, a great number of E-Learning platforms have been introduced on the market and their selection is not a trivial task: various features should be taken into account during the evaluation of an E-Learning platform. Obviously, the analysis of the technical features of an E-Learning platform is not enough: it is also important to understand how it can be integrated in the didactic context in order to facilitate learning and training and what principles are applied to guide the way the system is used. A decade ago, the authors of this paper introduced a model for describing and characterizing on-line learning platform components. Today, the aim of this paper is to evaluate and upgrade this model. During this period, many things have changed in the Web (the introduction of social networks, new multimedia protocols, etc.): what has changed in the E-Learning platforms? Today how to evaluate the E-Learning platforms? In this paper the evaluation model will be updated and then used to evaluate the most known existing platforms.

PROGRAM VIDEO CALL BERBASIS PEER TO PEER MENGGUNAKAN PROTOKOL RTMFP

The rapid development of information technology-based communication to encourage the development of video conferencing applications to a variety of media platforms. One of the media that is easily accessible is a web application development based RIA (Rich Internet Application). In this study developed a flash-based video conferencing application to utilize the net class group in ActionScript 3.0 and multimedia protocols RTMFP (Real Time Media Flow Protocol). Streaming video delivery technology requires codecs to be able to transmit video and audio. To find out which one is suitable codec in the development of this application, the analysis is done where appropriate codec for video conferencing on the public network access in terms of the quality of the resulting. The conclusion of the implementation and analysis of three types of audio codecs and codec, is that the codec h.264 and h.264 base profile play a video codec that is suitable for public networks because it produces little noise when there is a lot of movement when compared to the Sorenson video codec.

From S‐band mobile interactive multimedia to fixed satellite interactive multimedia: making satellite interactivity affordable at Ku‐band and Ka‐band

SummaryThis paper describes the evolution of the ETSI S‐band mobile interactive multimedia protocol to support fixed satellite interactive multimedia (F‐SIM) services exploiting existing Ku‐band and Ka‐band satellites. The key F‐SIM protocol differences for both physical and upper layers are described and justified. The F‐SIM protocol has been adopted by the recently deployed Eutelsat Broadcast Interactive System whose architecture, key system parameters, link budget examples and key composing elements are also described. Finally, a summary of laboratory and field trials results over the Eutelsat KA‐SAT multibeam satellite are illustrated. Copyright © 2015 John Wiley & Sons, Ltd.

A fuzzy-based QoS Maximization protocol for WiFi Multimedia (IEEE 802.11e) Ad hoc Networks

The Quality of Service (QoS) management within a multiple-traffic Wi-Fi MultiMedia (WMM) ad hoc network is a tedious task, since each traffic type requires a well determined QoS-level. For this reason, the IEEE Working Group has proposed the IEEE 802.11e Enhanced Distributed Channel Access (EDCA) protocol at the MAC layer of WMM ad hoc networks. However, several studies have shown that EDCA must be further improved for three main reasons. The first reason is the poor performance of EDCA under high traffic conditions due to the high collision rate. The second reason is the need to maximize the traffic performance (delay, throughput, etc.) guaranteed by EDCA, seen the rapid evolution of the applications (multimedia, real time, etc.). The third reason is the need to maximize the energy efficiency of the EDCA, seen its use in battery constrained devices (e.g. Laptop, Smart phone, Tablet computers, etc.). For these three reasons, we propose in this paper a Three-in-One solution MAC protocol called QoS Maximization of EDCA (QM-EDCA), which is an enhanced version of EDCA. Based on the fuzzy logic mathematic theory, QM-EDCA incorporates a dynamic MAC parameters fuzzy logic system, in order to adapt dynamically the Arbitration inter frame Spaces according to the network state and remaining energy. Simulation results show that QM-EDCA outperforms EDCA by reducing significantly the collision rate, and maximizing traffic performance and energy-efficiency. In addition our solution is fully distributed.

Language and tool support for event refinement structures in Event-B

Abstract Event-B is a formal method for modelling and verifying the consistency of chains of model refinements. The event refinement structure (ERS) approach augments Event-B with a graphical notation which is capable of explicit representation of control flows and refinement relationships. In previous work, the ERS approach has been evaluated manually in the development of two large case studies, a multimedia protocol and a spacecraft sub-system. The evaluation results helped us to extend the ERS constructors, to develop a systematic definition of ERS, and to develop a tool supporting ERS. We propose the ERS language which systematically defines the semantics of the ERS graphical notation including the constructors. The ERS tool supports automatic construction of the Event-B models in terms of control flows and refinement relationships. In this paper we outline the systematic definition of ERS including the presentation of constructors, the tool that supports it and evaluate the contribution that ERS and its tool make. Also we present how the systematic definition of ERS and the corresponding tool can ensure a consistent encoding of the ERS diagrams in the Event-B models.

The Soft Robotics Toolkit: Shared Resources for Research and Design

This article describes the development of the Soft Robotics Toolkit, a set of open access resources to support the design, fabrication, modeling, characterization, and control of soft robotic devices. The ultimate aim of the toolkit is to support researchers in building upon each other's work, and thereby advance the field of soft robotics. An additional aim is to support educators and encourage students to pursue careers in engineering and science by making the resources as accessible as possible. The toolkit was developed and refined through a series of pilot studies and user tests. Specifically, the resources were used by students in a project-based medical device design course; volunteers from a variety of backgrounds tested the toolkit and provided feedback, and soft robotics researchers used the collection of resources and contributed to its development. Throughout all user studies, qualitative data were collected and used to guide improvements to the toolkit. This process of testing and refinement has resulted in a website containing design documentation describing general hardware control platforms and specific soft robotic component designs. The online documentation includes downloadable computer-aided design (CAD) files, detailed multimedia protocols for the fabrication of soft devices, tutorials and scripts for modeling and analyzing soft actuators and sensors, and source code for controlling soft devices. Successive iterations of qualitative data gathering and redesign have confirmed that the toolkit documentation is sufficiently detailed to be useful for researchers from a wide range of backgrounds. To date, the focus of the toolkit has primarily been fluid-actuated robotic systems, but the plan is to expand it to support a wider range of soft robotic-enabling technologies. The toolkit is intended as a community resource, and all researchers working in this field are invited to guide its future development by providing feedback and contributing new content.

Delay constraint multipath routing for wireless multimedia ad hoc networks

SummaryAccording to the disadvantages of real time and continuity for multimedia services in ad hoc networks, a delay constraint multipath routing protocol for wireless multimedia ad hoc networks, which can satisfy quality of service (QoS) requirement (QoS multipath optimized link state routing [MOLSR]), is proposed. The protocol firstly detects and analyzes the link delay among the nodes and collects the delay information as the routing metric by HELLO message and topology control message. Then, through using the improved multipath Dijkstra algorithm for path selection, the protocol can gain the minimum delay path from the source node to the other nodes. Finally, when the route is launched, several node‐disjoint or link‐disjoint multipaths will be built through the route computation. The simulation and test results show that QoS‐MOLSR is suitable for large and dense networks with heavy traffic. It can improve the real time and reliability for multimedia transmission in wireless multimedia ad hoc networks. The average end‐to‐end delay of QoS‐MOLSR is four times less than the optimized link state routing. Copyright © 2014 John Wiley & Sons, Ltd.

Rqa based approach to detect and prevent ddos attacks in voip networks

Abstract Voice over Internet Protocol (VoIP) is a family of technologies for the transmission of voice over Internet. Voice is converted into digital signals and transmitted as data packets. The Session Initiation Protocol (SIP) is an IETF protocol for VoIP and other multimedia. SIP is an application layer protocol for creating, modifying and terminating sessions in VoIP communications. Since SIP is a more flexible and simple protocol, it is quite easy to add features to it. Distributed Denial of Service Attack (DDoS) floods the server with numerous requests from various hosts. Hence, the legitimate clients will not be able to get their intended services. A major concern in VoIP and almost in all network domains is availability rather than data consistency. Most of the surviving techniques could prevent VoIP network only after collision. This paper proposes a Recurrence Quantification based approach to detect and prevent VoIP from a DDoS attack. This model detects the attack at an earlier stage and also helps to prevent from further attacks. In addition, this techniques enables the efficient utilization of resources. QUALNET has been used to simulate the operation of the proposed technology.

Reputation-Based Cooperative Detection Model of Selfish Nodes in Cluster-Based QoS-OLSR Protocol

The QOLSR is a multimedia protocol that was designed on top of the optimized link state routing (OLSR) protocol for mobile ad hoc network. It considers the quality of service (QoS) of the nodes during the selection of the multi-point relay (MPRs) nodes. One of the drawbacks of this protocol is the presence of selfish nodes that degrade the network lifetime. The limited energy and resources, and the absence of any motivation mechanism cause mobile nodes to behave selfishly during the MPRs selection. A new MPR selection based on cluster head election was proposed in previous work to increase network lifetime. In this paper, we consider the selfishness during the election and selection process by proposing the use of reputation system that will motivate nodes to participate during the selection of MPRs, where the reputation is calculated based on VCG mechanism design. After solving the selfishness during network formation, we have discovered that nodes can misbehave after being selected/elected. Such a passive malicious behavior could lead to a denial of service attack due to the drop of packets. As a solution, we propose a hierarchal cooperative watchdog detection model for the cluster-based QOLSR, where nodes cooperate in a hierarchical manner to detect selfish nodes. Moreover, to motivate watchdogs to monitor and cooperate with each other, incentives are given and calculated using cooperative game theory, where Shapley value is used to compute the contribution of each watchdog on the final decision. Simulation results show that the novel cluster-based QoS-OLSR model can give incentive to nodes to behave normally without sacrificing the quality of service of the network. In addition, the hierarchical cooperative detection model shows a more reliable and efficient detection of selfish nodes.

Research on Standard Domain and Non Standard Domain Based on SIP Protocol

SIP protocol is a for the establishment, change and terminate multimedia session control protocol of application layer, based on the analysis of SIP protocol stack, in view of the non SIP video communication field has designed a communication strategy, achieved with the standard SIP domain as well as the standard SIP device and the existing non SIP domain communication, makes SIP protocol is compatible with existing video scheduling system, enhances the use range, avoid re design of non SIP domain, and the validation and application in the bus company project.

A secure authentication scheme for session initiation protocol by using ECC on the basis of the Tang and Liu scheme

ABSTRACTSession initiation protocol (SIP) provides the basis for establishing the voice over internet protocol sessions after authentication and exchanging signaling messages. SIP is one of the significant and extensively used protocols in the multimedia protocol stack. Since the RFC2617 was put forth, numerous schemes for SIP authentication have been presented to overcome the flaws. Recently, in 2012, Tang and Liu proposed SIP based authentication protocol and claimed for eliminating the threats in Arshad and Ikram protocol. However the scheme can be made more robust by making further improvements, as the former scheme may come under a threat by adversaries through impersonating a server, given that the user password is compromised. We have proposed an improved protocol for SIP authentication by using elliptic curve cryptography that encounters the previous threat with enhanced security. The analysis shows that proposed scheme is suitable for applications with higher security requirements. Copyright © 2013 John Wiley & Sons, Ltd.

IMS-based distributed multimedia conferencing services for next-generation mobile networks

Distributed architecture offers many advantages compared to centralized architecture in terms of providing multimedia services. However, as a trade-off, distributed architecture requires that peers contribute a portion of their bandwidth and computational capacity to maintain the mutual overlay interconnection. This requirement develops into a serious problem for mobile users and wireless infrastructure, as the radio resource in this network is tremendously expensive, based on 3gpp (2005), and is one of the reasons why distributed architecture has not been widely applied in next-generation (4G) networks. It is also the main reason why multimedia services such as video conference have to rely on a costly centralized architecture built over an expensive media resource function controllers via the Internet protocol (IP) multimedia subsystem (IMS). This research work proposes a new distributed architecture utilizing intelligence and extra capacity, currently available on LTE and WiMAX base stations to reduce the required bit rates that each peer has to provide in order to maintain the overlay network. This reduction saves valuable radio resources and allows a distributed architecture to provide video conferencing services on 4G networks, with all the advantages of a distributed architecture such as flexibility, scalability, smaller delay, and lower cost. In addition, this can be implemented with a minimum modification of the standardized IMS platform and the 4G infrastructure, thereby saving the operators and service providers from excessive investments. A prototype has been built to prove the feasibility of the proposed architecture and evaluate its performances. The results show that our proposed distributed video conferencing service can actually reduce the average bandwidth required for data and signaling messages at wireless mobile terminals while maintaining the main operations of a video conference session.