Multi-frequency Synthetic Aperture Radar Research Articles

Land cover mapping of mixed classes using 2D CNN with multi-frequency SAR data

Synthetic aperture radar (SAR) data obtained at multiple frequencies and polarizations offers valuable complementary information for classifying mixed classes that exhibit similar backscattering response. Although deep learning-based convolutional neural networks (CNNs) effectively extract features from multi-frequency SAR data, the arbitrary ordering of SAR features may hinder optimal convolution of the best feature sub-space for a specific class and underutilize available multi-frequency data. To address this, a novel CNN transforming SAR feature-space from 1-D to 2-D and employing varied dilation-rate convolutions is introduced. This transformation maximizes unique and localized feature combinations, efficiently utilizing the available feature sub-spaces and extracting discriminative features for accurate classifications, addressing the challenge of arbitrary band neighborhoods. Utilizing dual-polarization SAR data from ALOS-2 PALSAR-2 and Sentinel-1 sensors, the proposed CNN achieves an average f-score of 0.97 and a kappa coefficient of 0.97, an improvement of 11 %, 7 % and 3 % in OA compared to the 1-D, 2-D and 3-D CNN classifiers, without feature transformation. The classifier's generalization ability is evaluated using ground truth knowledge of various heterogeneous classes, and the proposed CNN classifier outperforms others in terms of accuracy metrics and generalization ability.

Estimating stem volume of Eucalyptus sp. and Pinus sp. plantations in Brazil, using Sentinel-1B and ALOS-2/PALSAR-2 data

Multifrequency synthetic aperture radar (SAR) data have been applied to discriminate subtle differences in the vegetation and to better characterize its structural properties, since each SAR frequency will interact with the different sections of the vegetation canopy. In this study, our main objective was to evaluate the use of multifrequency Sentinel-1 and ALOS-2/PALSAR-2 data for stem volume estimations in Eucalyptus sp. and Pinus sp. plantations using three different machine learning algorithms: random forest (RF), support vector regression (SVR), and extreme gradient boosting (XGB). Different experiments were carried out using combinations of predictor variables derived from both SAR sensors: backscattering, polarimetric decompositions, and interferometry data, and field data considering specific models for Eucalyptus sp. and Pinus sp. and a generic model comprising all forest plantations data. The machine learning models using predictor variables derived from SAR data achieved moderately high accuracy to predict stem volume, mainly when SAR data were used in combination with stand age (Experiment iv). In the best prediction scenario (Experiment iv), the RF, SVR, and XGB models were able to explain 81.7%, 68.5%, and 81.8% [coefficient of variation (R2) values] of stem volume variability considering the generic models, respectively. Our results pointed out that the RF algorithm showed the best performance in predicting stem volume with significant good results and easier implementation in comparison with the other two algorithms (SVR and XGB).

Surface soil moisture estimation from multi-frequency SAR images using ANN and experimental data on a semi-arid environment region in Konya, Turkey

Surface soil moisture (SSM) is an essential component of the water cycle on earth and has a substantial role in the assessment of agriculture, drought, ecology, and climate science. Accurate estimation of SSM is critical for strategic management of precise farming, and climate change and drought monitoring. In particular, microwave remote sensing sensors can estimate SSM over large areas. The objective of this study is to propose a framework for retrieving soil moisture employing an Artificial Neural Network (ANN) for a semi-arid environment, using the data acquired from multi-frequency (X-, C-, and L-band) Synthetic Aperture Radar (SAR) sensors. In the experimental analysis, soil parameters (i.e., SSM, soil roughness, and altitude) and sensor characteristics (i.e., frequency, incidence angle, and backscatter coefficient) were used for the fallow land and, an additional feature as Normalized Difference Vegetation Index (NDVI) was included for a field cultivated with wheat. The resampling of data was tested over two windows as 3 × 3 and 5 × 5. The obtained results show that in general the window size 5 × 5 provides better results. Amongst the wavelengths, X-band Kompsat-5 achieved the highest correlation in both cultivated (R=0.85) and fallow lands (R=0.79), and L-band ALOS-2 gave the lowest RMSE as 1.68 of (vol%). Furthermore, Radarsat-2 provided slightly better results (RMSE=3.34–3.73) than Sentinel-1 (RMSE=3.20–3.77) in ANN analysis in the C-band.

Investigation of Multi-Frequency SAR Data to Retrieve the Soil Moisture within a Drip Irrigation Context Using Modified Water Cloud Model.

The objective of this paper was to estimate soil moisture in pepper crops with drip irrigation in a semi-arid area in the center of Tunisia using synthetic aperture radar (SAR) data. Within this context, the sensitivity of L-band (ALOS-2) in horizontal-horizontal (HH) and horizontal-vertical (HV) polarizations and C-band (Sentinel-1) data in vertical-vertical (VV) and vertical-horizontal (VH) polarizations is examined as a function of soil moisture and vegetation properties using statistical correlations. SAR signals scattered by pepper-covered fields are simulated with a modified version of the water cloud model using L-HH and C-VV data. In spatially heterogeneous soil moisture cases, the total backscattering is the sum of the bare soil contribution weighted by the proportion of bare soil (one-cover fraction) and the vegetation fraction cover contribution. The vegetation fraction contribution is calculated as the volume scattering contribution of the vegetation and underlying soil components attenuated by the vegetation cover. The underlying soil is divided into irrigated and non-irrigated parts owing to the presence of drip irrigation, thus generating different levels of moisture underneath vegetation. Based on signal sensitivity results, the potential of L-HH data to retrieve soil moisture is demonstrated. L-HV data exhibit a higher potential to retrieve vegetation properties regarding a lower potential for soil moisture estimation. After calibration and validation of the proposed model, various simulations are performed to assess the model behavior patterns under different conditions of soil moisture and pepper biophysical properties. The results highlight the potential of the proposed model to simulate a radar signal over heterogeneous soil moisture fields using L-HH and C-VV data.

Mapping Woody Volume of Mediterranean Forests by Using SAR and Machine Learning: A Case Study in Central Italy

In this paper, multi-frequency synthetic aperture radar (SAR) data at L- and C-bands (ALOS PALSAR and Envisat/ASAR) were used to estimate forest biomass in Tuscany, in Central Italy. The ground measurements of woody volume (WV, in m3/ha), which can be considered as a proxy of forest biomass, were retrieved from the Italian National Forest Inventory (NFI). After a preliminary investigation to assess the sensitivity of backscatter at C- and L-bands to forest biomass, an approach based on an artificial neural network (ANN) was implemented. The ANN was trained using the backscattering coefficient at L-band (ALOS PALSAR, HH and HV polarization) and C-band (Envisat ASAR in HH polarization) as inputs. Spatially distributed WV values for the entire test area were derived by the integration (fusion) of a canopy height map derived from the Ice, Cloud, and Land Elevation Geoscience Laser Altimeter System (ICESat GLAS) and the NFI data, in order to build a significant ground truth dataset for the training stage. The analysis of the backscattering sensitivity to WV showed a moderate correlation at L-band and was almost negligible at C-band. Despite this, the ANN algorithm was able to exploit the synergy of SAR frequencies and polarizations, estimating WV with average Pearson’s correlation coefficient (R) = 0.96 and root mean square error (RMSE) ≃ 39 m3/ha when applied to the test dataset and average R = 0.86 and RMSE ≃ 75 m3/ha when validated on the direct measurements from the NFI. Considering the heterogeneity of the scenario (Mediterranean mixed forests in hilly landscape) and the small amount of available ground measurements with respect to the spatial variability of different plots, the obtained results can be considered satisfactory. Moreover, the successful use of WV from global maps for implementing the algorithm suggests the possibility to apply the algorithm to wider areas or even to global scales.

The SARSense Campaign: Air- and Space-Borne C- and L-Band SAR for the Analysis of Soil and Plant Parameters in Agriculture

With the upcoming L-band Synthetic Aperture Radar (SAR) satellite mission Radar Observing System for Europe L-band SAR (ROSE-L) and its integration into existing C-band satellite missions such as Sentinel-1, multi-frequency SAR observations with high temporal and spatial resolution will become available. The SARSense campaign was conducted between June and August 2019 to investigate the potential for estimating soil and plant parameters at the agricultural test site in Selhausen (Germany). It included C- and L-band air- and space-borne observations accompanied by extensive in situ soil and plant sampling as well as unmanned aerial system (UAS) based multispectral and thermal infrared measurements. In this regard, we introduce a new publicly available SAR data set and present the first analysis of C- and L-band co- and cross-polarized backscattering signals regarding their sensitivity to soil and plant parameters. Results indicate that a multi-frequency approach is relevant to disentangle soil and plant contributions to the SAR signal and to identify specific scattering mechanisms associated with the characteristics of different crop type, especially for root crops and cereals.

Comparison between Dense L-Band and C-Band Synthetic Aperture Radar (SAR) Time Series for Crop Area Mapping over a NISAR Calibration-Validation Site

Crop area mapping is important for tracking agricultural production and supporting food security. Spaceborne approaches using synthetic aperture radar (SAR) now allow for mapping crop area at moderate spatial and temporal resolutions. Multi-frequency SAR data is highly useful for crop monitoring because backscatter response from vegetation canopies is wavelength dependent. This study evaluates the utility of C-band Sentinel-1B (Sentinel-1) and L-band ALOS-2 (PALSAR) data, collected during the 2019 growing season, for generating accurate active crop extent (crop vs. non-crop) classifications over an agricultural region in western Canada. Evaluations were performed against the Agriculture and Agri-Food Canada satellite-based Annual Cropland Inventory (ACI), an open data product that maps land cover across the extent of Canada’s agricultural land. Classifications were performed using the temporal coefficient of variation (CV) approach, where an optimal crop/non-crop delineating CV threshold (CVthr) is selected according to Youden’s J-statistic. Results show that crop area mapping agreed better with the ACI when using Sentinel-1 data (83.5%) compared to PALSAR (73.2%). Analysis of performance by crop reveals that PALSAR’s poorer performance can be attributed to soybean, urban, grassland, and pasture ACI classes. This study also compared CV values to in situ wet biomass data for canola and soybeans, showing that crops with lower biomass (soybean) had correspondingly lower CV values.

A Classification Scheme for Sediments and Habitats on Exposed Intertidal Flats with Multi-Frequency Polarimetric SAR

We developed an extension of a previously proposed classification scheme that is based upon Freeman–Durden and Cloude–Pottier decompositions of polarimetric Synthetic Aperture Radar (SAR) data, along with a Double-Bounce Eigenvalue Relative Difference (DERD) parameter, and a Random Forest (RF) classifier. The extension was done, firstly, by using dual-copolarization SAR data acquired at shorter wavelengths (C- and X-band, in addition to the previously used L-band) and, secondly, by adding indicators derived from the (polarimetric) Kennaugh elements. The performance of the newly developed classification scheme, herein abbreviated as FCDK-RF, was tested using SAR data of exposed intertidal flats. We demonstrate that the FCDK-RF scheme is capable of distinguishing between different sediment types, namely mud and sand, at high spatial accuracies. Moreover, the classification scheme shows good potential in the detection of bivalve beds on the exposed flats. Our results show that the developed FCDK-RF scheme can be applied for the mapping of sediments and habitats in the Wadden Sea on the German North Sea coast using multi-frequency and multi-polarization SAR from ALOS-2 (L-band), Radarsat-2 (C-band) and TerraSAR-X (X-band).

Model-Based Interpretation of PolSAR Data for the Characterization of Glacier Zones in Greenland

Different approaches have been proposed in recent years to map glacier zones using Synthetic Aperture Radar (SAR). Most of them rely on empirical or statistical approaches for the interpretation of backscatter intensity measurements and their seasonal variations related to the melting regime of the different glacier zones. This study focuses on the potential of polarimetric SAR measurements to characterize the scattering in the different glacier zones in order to distinguish between them. For this, a general two component scattering model is proposed, accounting for surface and sub-surface contributions in the different glacier zones. The (anisotropic) propagation through snow, firn and ice layers is also accounted for as it plays an important role in the interpretation of the polarimetric signatures. A set of five polarimetric descriptors is proposed to describe the projection of the model on the SAR measurements. The ability of the model to characterize the scattering in the different glacier zones is validated and discussed at different frequencies (X-, C-, and L-band). For this, a multi-frequency airborne SAR dataset acquired by the DLRs F-SAR sensor in West Greenland during the ARCTIC 2015 campaign is used. The achieved results indicate that L-band polarimetric measurements allow to differentiate the different glacier zones based on the sub-surface (e.g. volume) scattering characteristics. In contrast, the increased (back-) scattering complexity and the reduced penetration capability limit the potential of X- and C-band polarimetric measurements.

Performance evaluation of multi-parametric synthetic aperture radar data for geological lineament extraction

ABSTRACT The demarcation of linear geomorphological features due to fracture systems, underlying or exposed faults, drainage lines etc. from satellite images has been one of the most widely used applications in geological studies. Synthetic Aperture Radar (SAR) data has been recognized as an effective tool for lineament extraction due to its unique sensitivity to subtle topography, soil moisture and texture. However, the typical SAR sensor parameters such as frequency, polarization and look direction plays a vital role in enhancing the performance for a specific application. Therefore, the study aims to analyse the multi-frequency (C- and L-band), multi-polarization (like and cross) and multi-look direction SAR data for geological lineaments extraction. In this paper, Sentinel-1 and Advanced Land Observation Satellite (ALOS)-2 Phased Array type L-band Synthetic Aperture Radar (PALSAR)-2 datasets acquired over a part of the Indo-Burma ranges of Manipur region (northeastern part of India) are considered for analysis. The lineaments extracted from SAR datasets are compared with reference to lineaments provided by the Geological Survey of India (GSI) through their portal. The study observes that the like-polarization C-band SAR data provide optimal results for this application. It is also observed that the integration of lineaments extracted from multi-look SAR data can significantly improve the performance than that derived from single-look data. Overall, the study also focuses on the spatial distribution of lineaments with respect to the local structural regime for a better understanding of the regional tectonic setup.

Comparison Between Dielectric Inversion Results From Synthetic Aperture Radar Co- and Quad-Polarimetric Data via a Polarimetric Two-Scale Model

In this study, we compare the retrieval results for the dielectric properties of verified oil slick, acquired using airborne multifrequency synthetic aperture radar. A polarimetric two-scale model was used to invert the radar imagery by first employing solely the co-polarization channels, and then by employing the co-polarization channels in conjunction with the cross-polarization channels, and thereby employing the full suite of polarization information available. The goal is to show that the inversion results obtained from both methods are consistent. Given that the ocean surface is a highly nondepolarizing surface scatter, the signal return within the cross-polarization channels is usually negligible and of no practical use when trying to invert the returned backscatter into useful quantities such as the dielectric constant. In this article, we employ F-SAR data, which was acquired in X-, S-, and L-bands and has an extremely low noise floor, implying that the cross-polarization ratio can be employed. A signal-to-noise analysis showed that only the L-band acquisitions were suitable for analysis in this article. The retrieval results are comparable for the two methods in the case of low dielectric values.

Wetland Monitoring Using SAR Data: A Meta-Analysis and Comprehensive Review

Despite providing vital ecosystem services, wetlands are increasingly threatened across the globe by both anthropogenic activities and natural processes. Synthetic aperture radar (SAR) has emerged as a promising tool for rapid and accurate monitoring of wetland extent and type. By acquiring information on the roughness and moisture content of the surface, SAR offers unique potential for wetland monitoring. However, there are still challenges in applying SAR for mapping complex wetland environments. The backscattering similarity of different wetland classes is one of the challenges. Choosing the appropriate SAR specifications (incidence angle, frequency and polarization), based on the wetland type, is also a subject of debate and should be investigated more thoroughly. The geometric distortion of SAR imagery and loss of coherency are other remaining challenges in applying SAR and its processing techniques for wetland studies. Hence, this study provides a systematic meta-analysis based on compilation and analysis of indexed research studies that used SAR for wetland monitoring. This meta-analysis reviewed 172 papers and documented an upward trend in usage of SAR data, increasing usage of multi-sensor data, increasing integration of C- and L- bands over other configurations and higher classification accuracy with multi-frequency and multi-polarized SAR data. The highest number of wetland research studies using SAR data came from the USA, Canada and China. This meta-analysis highlighted the current challenges and solutions for wetland monitoring using SAR sensors.

Comparison of Machine Learning Methods Applied to SAR Images for Forest Classification in Mediterranean Areas

In this paper, multifrequency synthetic aperture radar (SAR) images from ALOS/PALSAR, ENVISAT/ASAR and Cosmo-SkyMed sensors were studied for forest classification in a test area in Central Italy (San Rossore), where detailed in-situ measurements were available. A preliminary discrimination of the main land cover classes and forest types was carried out by exploiting the synergy among L-, C- and X-bands and different polarizations. SAR data were preliminarily inspected to assess the capabilities of discriminating forest from non-forest and separating broadleaf from coniferous forests. The temporal average backscattering coefficient ( σ ¯ °) was computed for each sensor-polarization pair and labeled on a pixel basis according to the reference map. Several classification methods based on the machine learning framework were applied and validated considering different features, in order to highlight the contribution of bands and polarizations, as well as to assess the classifiers’ performance. The experimental results indicate that the different surface types are best identified by using all bands, followed by joint L- and X-bands. In the former case, the best overall average accuracy (83.1%) is achieved by random forest classification. Finally, the classification maps on class edges are discussed to highlight the misclassification errors.

Multi-Temporal and Multi-Frequency SAR Analysis for Forest Land Cover Mapping of the Mai-Ndombe District (Democratic Republic of Congo)

The European Space Agency’s (ESA) “SAR for REDD” project aims to support complementing optical remote sensing capacities in Africa with synthetic aperture radar (SAR) for Reducing Emissions from Deforestation and Forest Degradation (REDD). The aim of this study is to assess and compare Sentinel-1 C-band, ALOS-2 PALSAR-2 L-band and combined C/L-band SAR-based land cover mapping over a large tropical area in the Democratic Republic of Congo (DRC). The overall approach is to benefit from multi-temporal observations acquired from 2015 to 2017 to extract statistical parameters and seasonality of backscatters to improve forest land cover (FLC) classification. We investigate whether and to what extent the denser time series of C- band SAR can compensate for the L-band’s deeper vegetation penetration depth and known better FLC mapping performance. The supervised classification differentiates into forest, inundated forest, woody savannah, dry and wet grassland, and river swamps. Several feature combinations of statistical parameters from both, single and multi-frequency observations in a multivariate maximum-likelihood classification are compared. The FLC maps are reclassified into forest, savannah, and grassland (FSG) and validated with a systematic sampling grid of manual interpretations of very-high-resolution optical satellite data. Using the temporal variability of the dual-polarized backscatters, in the form of either wet/dry seasonal averages or using the statistical variance, in addition to the average backscatter, increased the classification accuracies by 4–5 percent points and 1–2 percent points for C- and L-band, respectively. For the FSG validation overall accuracies of 84.4%, 89.1%, and 90.0% were achieved for single frequency C- and L-band, and C/L-band combined, respectively. The resulting forest/non-forest (FNF) maps with accuracies of 90.3%, 92.2%, and 93.3%, respectively, are then compared to the Landsat-based Global Forest Change program’s and JAXA’s ALOS-1/2 based global FNF maps.

Multi-sensor approach integrating optical and multi-frequency synthetic aperture radar for carbon stock estimation over a tropical deciduous forest in India

An optimal model was developed for accounting forest carbon stock from synergistic use of optical data from Landsat TM and synthetic aperture radar (SAR) data from COSMO-Skymed (X-band), Radarsat-2 (C-band) and ALOS PALSAR (L-band) sensors over a tropical deciduous heterogeneous forest of India. The best-fit integrated multiple linear regression model had a model accuracy of 83%, r2 = 0.96, root mean square error = 10.02 Mg/ha and Willmott’s index of agreement of 0.98. The model further validated using chi-squared and t-test. Results of models for calculating the aboveground biomass (AGB) were converted to C and CO2 using conversion factors. Average AGB, C and CO2 were 70.5, 35.26 and 130.89 Mg/ha, respectively. The synergistic use of optical and multi-frequency SAR data enhanced the AGB saturation threshold to about 150 Mg/ha for tropical deciduous mixed forests. Hence, the synergistic use of this data is suggested for large-scale AGB and C estimations for tropical forests. Optical remote sensing sensors are extensively used due to greater data availability despite their poor sensitivity toward forest parameters. In contrast, SAR signals are highly sensitive toward forest biophysical and structural parameters, providing a better alternative. This unique integrated approach provides valuable information regarding the spatial distribution and quantification of forest biomass and carbon.

Analysis of multi-frequency and multi-polarization SAR data for wetland mapping in Hamoun-e-Hirmand wetland

ABSTRACTThe complex, dynamic and narrow boundaries between vegetation types make wetland mapping challenging. Hereafter the case study of the Hamoun-e-Hirmand wetland is considered by analysing eight Synthetic Aperture Radar (SAR) Images acquired in dry and wet periods with three wavelengths (X-band ~ 3 cm, C-band ~ 6 cm, and L-band ~ 25 cm), three polarizations (HH, VV and VH), and four incidence angles (22°, 30°, 34° and 53°). Then, the Support Vector Machine (SVM) classification method was applied to classify TerraSAR-X, Sentinel-1, and ALOS-PALSAR images. The final wetland land cover map was created by combining the classification results obtained from each sensor. In the case in question, results show that TerraSAR-X (X-band, HH-53°) and Sentinel-1 data (C-band, VV-34°) were useful for determining the flooded vegetation area in the wet period. This is crucial for the conservation of water bird habitats since flooded vegetation is an ideal environment for the nesting and feeding of water birds. PALSAR data (L-band in both HH and VH polarizations, 30°) were capable of separating the classes of vegetation density in the wetland. In the dry period, Sentinel-1 (VV and VH, 34°) and TerraSAR-X (HH, 22° and 53°) had higher potential in land cover mapping than PALSAR (HH and VH, 30°). Based on these results, Sentinel-1 in VV and VH provides the highest ability to discriminate between dry and green plants. TerraSAR-X is better for separating meadow and bare land. The results obtained in this paper can reduce the ambiguity in selecting satellite data for wetland studies. The results can also be used to produce more accurate data from satellite images and to facilitate wetland investigation, conservation and restoration.

Detection of oil pollution impacts on vegetation using multifrequency SAR, multispectral images with fuzzy forest and random forest methods

Oil pollution harms terrestrial ecosystems. There is an urgent requirement to improve on existing methods for detecting, mapping and establishing the precise extent of oil-impacted and oil-free vegetation. This is needed to quantify existing spill extents, formulate effective remediation strategies and to enable effective pipeline monitoring strategies to identify leakages at an early stage. An effective oil spill detection algorithm based on optical image spectral responses can benefit immensely from the inclusion of multi-frequency Synthetic Aperture Radar (SAR) data, especially when the effect of multi-collinearity is sufficiently reduced. This study compared the Fuzzy Forest (FF) and Random Forest (RF) methods in detecting and mapping oil-impacted vegetation from a post spill multispectral optical sentinel 2 image and multifrequency C and X Band Sentinel – 1, COSMO Skymed and TanDEM-X SAR images. FF and RF classifiers were employed to discriminate oil-spill impacted and oil-free vegetation in a study area in Nigeria. Fuzzy Forest uses specific functions for the selection and use of uncorrelated variables in the classification process to yield an improved result. This method proved an efficient variable selection technique addressing the effects of high dimensionality and multi-collinearity, as the optimization and use of different SAR and optical image variables generated more accurate results than the RF algorithm in densely vegetated areas. An Overall Accuracy (OA) of 75% was obtained for the dense (Tree Cover Area) vegetation, while cropland and grassland areas had 59.4% and 65% OA respectively. However, RF performed better in Cropland areas with OA = 75% when SAR-optical image variables were used for classification, while both methods performed equally well in Grassland areas with OA = 65%. Similarly, significant backscatter differences (P < 0.005) were observed in the C-Band backscatter sample mean of polluted and oil-free TCA, while strong linear associations existed between LAI and backscatter in grassland and TCA. This study demonstrates that SAR based monitoring of petroleum hydrocarbon impacts on vegetation is feasible and has high potential for establishing oil-impacted areas and oil pipeline monitoring.

Optimized Wishart Network for an Efficient Classification of Multifrequency PolSAR Data

High-resolution wide-area images are required in the diverse field of research ranging from urban planning and disaster prediction to agriculture and geology. Sometimes the image is taken under harsh weather conditions or at night time. Current optical remote sensing technology does not have the capability to acquire images in such conditions. Synthetic aperture radar (SAR) uses microwave signal which has a long-range propagation characteristic that allows us to capture images in difficult weather conditions. In addition to this, some polarimetric SAR (PolSAR) systems are also capable of capturing images using multifrequency bands simultaneously resulting into a multitude of information in comparison to the optical images. In this letter, we propose a single-hidden layer optimized Wishart network (OWN) and extended OWN for classification of the single-frequency and multifrequancy PolSAR data, respectively. Performance evaluation is conducted on a single-frequency as well as multifrequency SAR data obtained by Airborne Synthetic Aperture Radar. We observed that for combining multiple band information, proposed single-hidden layer network outperforms deep learning-based architecture involving multiple hidden layers.

Multifrequency and Full-Polarimetric SAR Assessment for Estimating Above Ground Biomass and Leaf Area Index in the Amazon Várzea Wetlands

The aim of this study is to evaluate the potential of multifrequency and Full-polarimetric Synthetic Aperture Radar (SAR) data for retrieving both Above Ground Biomass (AGB) and Leaf Area Index (LAI) in the Amazon floodplain forest environment. Two specific questions were proposed: (a) Does multifrequency SAR data perform more efficiently than single-frequency data in estimating LAI and AGB of várzea forests?; and (b) Are quad-pol SAR data more efficient than single- and dual-pol SAR data in estimating LAI and AGB of várzea forest? To answer these questions, data from different sources (TerraSAR-X Multi Look Ground Range Detected (MGD), Radarsat-2 Standard Qual-Pol, advanced land observing satellite (ALOS)/ phased-arrayed L-band SAR (PALSAR-1). Fine-beam dual (FDB) and quad Polarimetric mode) were combined in 10 different scenarios to model both LAI and AGB. A R-platform routine was implemented to automatize the selection of the best regression models. Results indicated that ALOS/PALSAR variables provided the best estimates for both LAI and AGB. Single-frequency L-band data was more efficient than multifrequency SAR. PALSAR-FDB HV-dB provided the best LAI estimates during low-water season. The best AGB estimates at high-water season were obtained by PALSAR-1 quad-polarimetric data. The top three features for estimating AGB were proportion of volumetric scattering and both the first and second dominant phase difference between trihedral and dihedral scattering, extracted from Van Zyl and Touzi decomposition, respectively. The models selected for both AGB and LAI were parsimonious. The Root Mean Squared Error (RMSEcv), relative overall RMSEcv (%) and R2 value for LAI were 0.61%, 0.55% and 13%, respectively, and for AGB, they were 74.6 t·ha−1, 0.88% and 46%, respectively. These results indicate that L-band (ALOS/PALSAR-1) has a high potential to provide quantitative and spatial information about structural forest attributes in floodplain forest environments. This potential may be extended not only with PALSAR-2 data but also to forthcoming missions (e.g., NISAR, Global Ecosystems Dynamics Investigation Lidar (GEDI), BIOMASS, Tandem-L) for promoting wall-to-wall AGB mapping with a high level of accuracy in dense tropical forest regions worldwide.

TerraSAR-X and Wetlands: A Review

Since its launch in 2007, TerraSAR-X observations have been widely used in a broad range of scientific applications. Particularly in wetland research, TerraSAR-X’s shortwave X-band synthetic aperture radar (SAR) possesses unique capabilities, such as high spatial and temporal resolution, for delineating and characterizing the inherent spatially and temporally complex and heterogeneous structure of wetland ecosystems and their dynamics. As transitional areas, wetlands comprise characteristics of both terrestrial and aquatic features, forming a large diversity of wetland types. This study reviews all published articles incorporating TerraSAR-X information into wetland research to provide a comprehensive study of how this sensor has been used with regard to polarization, and the function of the data, time-series analyses, or the assessment of specific wetland ecosystem types. What is evident throughout this literature review is the synergistic fusion of multi-frequency and multi-polarization SAR sensors, sometimes optical sensors, in almost all investigated studies to attain improved wetland classification results. Due to the short revisiting time of the TerraSAR-X sensor, it is possible to compute dense SAR time-series, allowing for a more precise observation of the seasonality in dynamic wetland areas as demonstrated in many of the reviewed studies.