Multicomponent Composition Research Articles

Cellulose-Based Transparent Edible Antibacterial Oxygen-Barrier Coating for Long-Term Fruit Preservation.

Long-term preservation of fresh fruit and vegetables without a cold chain is a great challenge to food security because fruits and vegetables are highly vulnerable to poor storage conditions. Fruit spoilage is a complex biochemical process that involves many factors, including microbial reproduction, oxidation, metabolism, and H2O evaporation. Only the synergy of the multiple spoilage inhibition methods can achieve long-term freshness preservation. Herein, a multifunctional cellulose-based preservation coating with antibacterial, oxygen/water vapor barrier, and antioxidant properties is proposed, which is based on cellulose microgel (CMG) and prepared using multi-component composites with montmorillonite (MMT), cationic cellulose derivative (Cell-P+), and L-ascorbic acid (Vc). It has good wetting properties on fruits with different surfaces. This method can successfully preserve the long-term freshness of various fruits. This highly transparent, edible, and washable multifunctional cellulose-based fruit preservation coating can improve the quality of agricultural products, extend the shelf life of food, and reduce the cost of cold-chain transportation.

Hierarchical core-shell transitional metal chalcogenides Co9S8/ CoSe2@C nanocube embedded into porous carbon for tunable and efficient microwave absorption

In the domain of electromagnetic (EM) wave absorbing materials, the selection of suitable components and microstructures is an effective approach for designing the intense coupling of wave impedance and EM dissipation. In this study, we have successfully fabricated a double-carbon modified Co9S8/CoSe2 nanocube, where the core-shell Co9S8/CoSe2@C cube was anchored onto porous carbon (PC). The existence of three-dimensional (3D) porous carbon and the fabrication of Co9S8/CoSe2@C distributed on carbon nanosheets contribute to the improvement of conduction, magnetic losses, and the optimization of impedance matching. Substantial heterogeneous interfaces are generated between Co9S8, CoSe2, carbon shells, and PC, leading to extensive interfacial polarization and facilitating the transformation of EM energy into thermal energy. The abundant defects, S and Se vacancies in carbon component can act as polarization centers, inducing dipolar polarization and thus increasing the electromagnetic wave (EMW) loss. The Co9S8/CoSe2@C@PC exhibits the best microwave absorption properties, with a minimum reflection loss (RLmin) of −64.1 dB at 2.5 mm and an effective absorption bandwidth (EAB) of 6.3 GHz. The High-Frequency Structure Simulator results indicate the RCS values of the samples within the range of -90 °C < θ < 90 °C are lower than -20 dB m2, which can achieve almost full-angle coverage in the actual environment. This research offers inspiration and strategies for the design and synthesis of multi-component magneto-electric composites based on transitional metal chalcogenides.

Green Medicine: Advancing Antimicrobial Solutions with Diverse Terrestrial and Marine Plant-Derived Compounds

Infectious diseases continue to cause global morbidity and mortality. The rise of drug-resistant pathogens is a major challenge to modern medicine. Plant-based antimicrobials may solve this issue; hence, this review discussed in detail plant-sourced antimicrobial drugs as an alternative toward bacterial, fungal, and viral pathogens. Plant-derived chemicals from various sources such as marine, medicinal, and non-medicinal sources have diverse antimicrobial properties. Complex chemical profiles from these sources allow these molecules to interact with several targets in the microbial pathogens. Due to their multi-component composition, these compounds are more effective and less likely to acquire resistance than single-target antibiotics. Medicinal herbs have long been used for their antimicrobial properties; however, non-medicinal plants have also been identified for their antimicrobial properties. Other interesting new pathways for the identification of antimicrobials include marine plants, which contain a wide variety of metabolites that are both distinct and varied. We have conducted a thorough literature search for the medicinal, non-medicinal, and marine plant-derived molecules with antimicrobial roles from databases which include Scopus, PubMed, Google Scholar, and Web of Science. The review also discussed the synergistic potential of combining these plant-derived compounds with traditional antimicrobial drugs to attenuate the microbial pathogenesis. Based on the existing research and advancements, the review article emphasizes the importance of continuing research into plant-based antimicrobials from these many sources and integrating them with existing therapies to combat the rising threat of drug-resistant infections.

Structural Regulation of a Multi-Component Co2P2O7-MoN/NC Electrocatalyst for Efficient Oxygen Evolution Reaction.

Realizing efficient and durable non-precious metal-based electrocatalysts for oxygen evolution reaction (OER) still remains a great challenge. Here, a multi-component composite of Co2P2O7-MoN/NC containing pyrophosphate, nitride, and nitrogen-doped carbon is successfully prepared via a facile two-step synthesis method. Combining the structural regulation between the active metal- and non-metal-based species, Co2P2O7-MoN/NC demonstrates superior activity and durability for OER, requiring an overpotential of 278 mV at a current density of 10 mA cm-2, a Tafel slope of 83.3 mV dec-1, and long-term stability over 100 h in an alkaline solution. Post-characterizations reveal that synergistic effect among stable Co2P2O7, partially dissolved MoN, N-doped carbon, and new-formed CoOOH nanosheets enable structural reconstruction, fast charge transfer, and formation of oxygen-containing intermediates, promoting the OER performance significantly. This work provides a promising pathway to tune multi-components to fabricate efficient transition-metal-based electrocatalysts in energy conversion applications.

Elucidating structure and metabolism of insect biomaterials by solid-state NMR

Among the many natural biomaterials for which information on atomic-level structure and reorientational motion can offer essential clues to function, insoluble multi-component composites with limited degrees of order are among the most challenging to study. Despite its limited sensitivity, solid-state NMR (ssNMR) is often the technique of choice to ferret out these details in carbon- and nitrogen-rich materials: this spectroscopic approach can probe many biomaterials in their native or near-native states, either with or without the introduction of stable NMR-active isotopes, or with the assistance of dynamic nuclear polarization technology. During a span of close to four decades, such research targets and ssNMR approaches have been exemplified by insects, a diverse and evolutionarily agile group of organisms with global impacts that include ecology, agriculture, and human disease. In this short review, we present case studies on insect cuticles that range from protective exoskeletons and egg capsules to the wing structures that enable flight and showcase nature's awe-inspiring beauty, highlighting the use of ssNMR spectroscopy to profile chemical composition, elucidate macromolecular architecture, and monitor metabolic development in these fascinating biological assemblies.

Quantitative analysis of failure performance uncertainty based on multiscale mechanical analysis of PEMFCs’ C/C composite bipolar plates

In order to quantify the failure performance of PEMFCs’ C/C composite bipolar plates (BPs) under considering the uncertainty in multiscale sizes and loads, the failure probability function (FPF) of BPs at cold start is estimated. A three-stage multiscale simulation method is proposed for mechanical behavior analysis of multi-component heterogeneous composites. And the efficient estimation of FPF for C/C composite BPs is achieved via the proposed multiscale simulation method and decoupling sparse integration method, in which the unified density weight is constructed to decouple the double-loop framework of analyzing FPF, thereby reducing the computational complexity. Results indicate that the dangerous positions of BPs are around the gas flow channels and bolt holes. And the dangerous components are the carbon matrix and the interface between the matrix and fiber. The radius of elliptical fibers affects the distribution of failure factors on microscopic components, thereby affecting the variation of failure probability with fiber sizes significantly. The distribution parameter of composite layer thickness in BPs has a significant effect on structural safety, and the FPF result can be used to effectively guide the design of structure. Therefore, the proposed method is of great significance for guiding the rapid parameter design of composite BPs.

Easy reversible clustering of gold nanoparticles via pH-Induced assembly of PVP-b-PAA copolymer

The growing demand of novel hybrid organic/inorganic systems with exciting properties has contributed to an increasing need for simplifying production strategies. Here, we report a simple method to obtain controlled three-dimensional hybrid architectures, in particular hybrid supracolloids (hSC), formed by gold nanoparticles and a double hydrophilic block copolymer, specifically the poly(acrylic acid)-block-poly(N-vinyl-2-pyrrolidone) (PAA-b-PVP), directly in aqueous medium. The ubiquitous pH-sensitive poly(acrylic acid) (PAA) block initiates the assembly through pH changes, while the poly(N-vinyl-2-pyrrolidone) block assures the close affinity with the AuNPs. We demonstrate that the formation of hybrid supracolloids (hSC) is the result of the synergetic behavior of the two specific polymeric blocks. Additionally, the entire process shows spontaneous and fast switchability. The nanostructured copolymer behaves like a highly swollen hydrogel and displays a disordered internal structure. The driving force for the association of the copolymer chains is induced by the synergetic effects of the decrease in solubility of the poly(acrylic acid) block and the formation of inter and intra chains hydrogen bonds. These were demonstrated by using small angle X-ray scattering (SAXS), quartz crystal microbalance with dissipation monitoring (QCM-D) and scanning transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy (STEM-EDX). In turn, the AuNPs are randomly spread all over the polymeric matrix, as demonstrated by field emission gun – scanning electron microscopy (FEG-SEM). A correlation analysis reveals the hSC density depends mostly on the initial concentration of AuNPs. These results can inspire the fabrication of more complex structures with multicomponent composition.

Experimental Investigations of Assessment of Acute Toxicity of Drilling Mud.

At present, the main technological stages of oil production related to drilling operations require the use of a wide variety of drilling mud, which has a complex, multicomponent chemical composition. The drilling mud used and the resulting drilling waste must be safe for human health and the environment. The toxicity and hazard of drilling mud at this point in time remain poorly understood scientific problems and require detailing and studying in toxicological terms. The real degree of hazard and toxicity of drilling mud can only be determined by an experimental method, since its composition, which changes depending on the nature of the technological process and its degree of depletion, is not constant, which can change the toxicological properties. In an experiment conducted on adult male rats, under conditions of a single intragastric injection of drilling mud, new data were obtained regarding the parameters of its toxicity and hazard. The use of a wide variety of methods for determining lethal doses of drilling mud, including the probit analysis method, made it possible not only to substantiate the mean lethal dose of drilling mud but also other parameters of toxicity and survival of animals in the experimental groups. Features of eating behavior and body weight dynamics and the nature of the behavioral reactions revealed by the number and duration of stands and frequency and duration of grooming also indicate the presence of dose-dependent effects.

Rheology, Morphology and Mechanical Properties for Mixtures of Multicomponent Waste from Polymer Composites as Secondary Raw Materials

The article presents a study of the rheological properties and morphology of a mixture of multicomponent waste polymer compositions of polyamide 6 (PA6GF30) and polycarbonate (PC) from automotive parts. A comparative analysis of the melt flow rate of the obtained mixture was carried out depending on the content of its components. The compatibility of the components in the mixture and their distribution in the obtained polymer composition were studied. The effect of the composition of the secondary multicomponent mixture on the physical and mechanical properties is demonstrated. The possibility of reusing multicomponent polymer waste with the predicted main parameters of the technological process of injection molding is shown.

Block Copolymer-Directed Single-Diamond Hybrid Structures Derived from X-ray Nanotomography.

Block copolymers are recognized as a valuable platform for creating nanostructured materials. Morphologies formed by block copolymer self-assembly can be transferred into a wide range of inorganic materials, enabling applications including energy storage and metamaterials. However, imaging of the underlying, often complex, nanostructures in large volumes has remained a challenge, limiting progress in materials development. Taking advantage of recent advances in X-ray nanotomography, we noninvasively imaged exceptionally large volumes of nanostructured hybrid materials at high resolution, revealing a single-diamond morphology in a triblock terpolymer-gold composite network. This morphology, which is ubiquitous in nature, has so far remained elusive in block copolymer-derived materials, despite its potential to create materials with large photonic bandgaps. The discovery was made possible by the precise analysis of distortions in a large volume of the self-assembled diamond network, which are difficult to unambiguously assess using traditional characterization tools. We anticipate that high-resolution X-ray nanotomography, which allows imaging of much larger sample volumes than electron-based tomography, will become a powerful tool for the quantitative analysis of complex nanostructures and that structures such as the triblock terpolymer-directed single diamond will enable the generation of advanced multicomponent composites with hitherto unknown property profiles.

Multi-heterogeneous interfaces boost dielectric polarization in PBA-derived Co/MnO@NC ternary composites for electromagnetic wave absorption

The elaborate construction of multi-component composites has been deemed as a promising strategy to enhance dielectric polarization response capability in the preparation of highly efficient microwave absorbers. However, the rational design and integration of homogeneous composites with diverse components continues to pose a great challenge. Herein, we propose a straightforward self-assembly-carbonization strategy for fabricating Co/MnO@NC ternary composites derived from CoMn-Prussian Blue Analogous precursors, featuring enriched heterogeneous interfaces and balanced magneto-electric coupling synergy. The ternary composites effectively introduce diverse dissipation mechanisms, including interfacial polarization behavior originated from the constructed heterogeneous interfaces, dipole polarization relaxation triggered by atomic defects, and optimized magnetic loss ability from well-dispersed metallic Co species. Benefiting from these advantages, the Co/MnO@NC composites demonstrate superior electromagnetic wave absorption performances, with a minimum reflection loss value of −61.37 dB at the thickness of 3.5 mm and effective frequency absorption bandwidth of 6.32 GHz, covering the full Ku-band. Furthermore, power loss density and radar cross-section simulations validate that the Co/MnO@NC ternary composites possess exceptional microwave signal attenuation abilities, with a maximum radar cross-section reduction value of up to 27.98 dBm2 at 0°. Such outstanding absorption properties exceed those of most currently reported ternary composites and exhibit significant potential to replace conventional ferromagnetic-based absorbers. This work offers a straightforward strategy to fabricate ternary composites with excellent electromagnetic wave attenuation properties and sheds novel insights into the dissipation mechanisms.

β-Lactoglobulin Enhances Clay and Activated Carbon Binding and Protection Properties for Cadmium and Lead.

The removal of heavy metals from wastewater remains a challenge due to the limitations of current remediation methods. This study aims to develop multicomponent composites as inexpensive and environmentally friendly sorbents with enhanced capture of cadmium (Cd) and lead (Pb). The composites are based on calcium montmorillonite (CM) and activated carbon (AC) because of their proven effectiveness as sorbents for diverse toxins in environmental settings. In this study, we used a combination of computational and experimental methods to delineate that β-lactoglobulin enhances CM and AC binding and protection properties for Cd and Pb. Modeling and molecular dynamics simulations investigated the formation of material systems formed by CM and AC in complex with β-lactoglobulin and predicted their capacity to bind heavy metal ions at neutral pH conditions. Our simulations suggest that the enhanced binding properties of the material systems are attributed to the presence of several binding pockets formed by β-lactoglobulin for the two heavy metal ions. At neutral pH conditions, divalent Cd and Pb shared comparable binding propensities in all material systems, with the former being consistently higher than the latter. To validate the interactions depicted in simulations, two ecotoxicological models (L. minor and H. vulgaris) were exposed to Cd, Pb, and a mixture of the two. The inclusion of CM-lactoglobulin (β-lactoglobulin amended CM) and AC-lactoglobulin (β-lactoglobulin amended AC) at 0.05-0.2% efficiently and dose-dependently reduced the severe toxicity of metals and increased the growth parameters. This high efficacy of protection shown in the ecotoxicological models may result from the numerous possible interaction pockets of the β-lactoglobulin-amended materials depicted in simulations. The ecotoxicological models support the agreement with computations. This study serves as a proof of concept on how computations in tandem with experiments can be used in the design of multicomponent clay- and carbon-based sorbent amended systems with augmented functionalities for particular toxins.

Fe3C/Fe implanted hierarchical porous carbon as efficient electromagnetic wave absorber

The rapid development of communication technology has led to severe microwave pollution, which presents a challenge for microwave-absorbing composites. Current research suggests achieving superior microwave absorption requires the use of multi-component operation and ingenious structural design. Consequently, the present study has prepared continuous porous carbon (CPC) materials doped with large amounts of Fe3C/Fe nanoparticles (Fe@CPC) using carbonization and acid etching. By balancing the advantages of the above strategies, it is possible to address issues such as poor impedance match, single loss capacity, easy oxidation of magnetic metals/alloys, and the limited absorption bandwidth of conventional absorbing materials at the same time. The material exhibits a minimum reflection loss of −23.2 dB with an efficient absorption range of 5.3 GHz at 1.9 mm at a filler content of just 10 wt% in the paraffin matrix. In this paper, the samples with a continuous porous structure were prepared by a simple method, and the properties were excellent due to the appropriate preparation method and the synergistic effect of the multi-component composite. The porous structure facilitates the presence of a considerable number of active sites, which enables the loading of a substantial quantity of metal ions. Furthermore, nanoparticles are capable of aggregating and dispersing on the surface. This paper presents a theoretical framework for understanding the synergistic effect of microwave radiation through interfacial polarization and micro-scale magnetic interaction. Nevertheless, there are still obstacles to overcome in terms of achieving precise control over the structural design and ensuring the compatible integration of metal components.

Enhanced microwave absorption in Fe3O4@PS/MWCNT multicomponent composites: Fabrication, characterization, and performance analysis

Multiple-component materials with advanced microstructure are increasingly utilized in the development of microwave absorption materials. In this paper, a magnetic hollow sphere composed of Fe3O4@PS was fabricated by simply depositing Fe3O4 nanoparticles onto the surface-modified PS hollow spheres through electrostatic interactions. The microwave absorption properties of Fe3O4 @PS hollow spheres were studied by varying the loading capacity of Fe3O4. The results show that when the Fe3O4 content is 28.59 wt%, the optimal minimum reflection loss is −26.9 dB with effective absorption bandwidths (RL ≤ −10 dB) exceeding 0.3 GHz. Furthermore, the straightforward combination of the Fe3O4@PS with MWCNTs enables the enhancement of the microwave absorption up to −41.4 dB at 14.5 GHz, with an effective absorption bandwidth exceeding 5.9 GHz (12.1–18 GHz) at a thickness of 2 mm. This study is expected to provide valuable insights into the design of nanocomposites for microwave absorption applications.

Kirkendall Effect-Induced Ternary Heterointerfaces Engineering for High Polarization Loss MOF-LDH-MXene Absorbers.

Heterogeneous interfacial engineering has garnered widespread attention for optimizing polarization loss and enhancing the performance of electromagnetic wave absorption. A novel Kirkendall effect-assisted electrostatic self-assembly method is employed to construct a metal-organic framework (MOF, MIL-88A) decorated with Ni-Fe layered double hydroxide (LDH), forming a multilayer nano-cage coated with Ti3C2Tx. By modulating the surface adsorption of Ti3C2Tx on LDH, the heterointerfaces in MOF-LDH-MXene ternary composites exhibit excellent interfacial polarization loss. Additionally, the Ni-Fe LDH@Ti3C2Tx nano-cage exhibits a large specific surface area, abundant defects, and a large number of heterojunction structures, resulting in excellent electromagnetic wave absorption performance. The MIL-88A@Ni-Fe LDH@Ti3C2Tx-1.0 nano-cage achieves a reflection loss value of -46.7 dB at a thickness of 1.4mm and an effective absorption bandwidth of 5.12 GHz at a thickness of 1.8mm. The heterojunction interface composed of Ni-Fe LDH and Ti3C2Tx helps to enhance polarization loss. Additionally, Ti3C2Tx forms a conductive network on the surface, while the cavity between the MIL-88A core and the Ni-Fe LDH shell facilitates multiple attenuations by increasing the transmission path of internal incident waves. This work may reveal a new structural design of multi-component composites by heterointerfaces engineering for electromagnetic wave absorption.

Deep learning-based microstructure analysis of multi-component heterogeneous composites during preparation

Monitoring microstructure evolution during the preparation has always been a difficult problem in the modification studies of SiC composite matrix. Here, we used X-ray tomography microscopy to observe the microstructure of SiCf/SiC-W-ZrB2 composites at different fabrication stage. Based on deep learning, the tracking of the densification process of matrix-modified SiCf/SiC composites was achieved and its suitability for microstructure reconstruction was also verified. The results showed that the average errors of reconstructed SiCf/SiC, pore and Metal (W/ZrB2) are respectively 7.53%, 8.31% and 0.96% by comparison with the segmentation results. Compared with the experimental results, the average error and the average relative error of reconstructed SiCf/SiC is less than 3% and 3.74%.

Development of the gas industry of the Orenburg region during the period of market reforms

The relevance of the topic is related to the need to study those industries of the region that are points of growth and drivers of development of the region. Such industries play an important role in the socio-economic development of the region, therefore, studying the problems of development of such an industry as the gas industry is an urgent task of economic science. The purpose of the article is to identify patterns and features of the development of the gas industry in the Orenburg region, its role in the development of the region, as well as problems that require urgent solutions. The scientific novelty of this research lies in the fact that the work substantiates the position on the development of the gas industry in accordance with such economic laws as the laws of increasing needs, saving time, scale of production, competition, and the effect of experience. The features of the regional gas industry related to the multicomponent composition of gas are highlighted, which made it possible to develop the chemical industry in the region. The article also identifies the problems of development of the gas industry. The article is based on a positive research methodology; the following methods were used: analysis, synthesis, induction, deduction, tabular, generalization, comparison, logical, historical and statistical analysis. Based on systematic and integrated approaches, cause-and-effect relationships between the development of the gas industry and the level of socio-economic development of the region have been identified. The practical significance of the study lies in the possibility of using its results in developing a regional development strategy and implementing regional economic policy. It is proposed to continue further research in the direction of scientific analysis of industry problems and the development of scientifically based recommendations for solving them.

Hierarchical multi-interface Co1-xS/Co9S8@C hollow microsphere for enhancing dielectric polarization as an efficient microwave absorber

Recently, close attention has been devoted to exploring highly efficient microwave absorbing materials (MAMs). Owing to their tunable dielectric properties and controllable structure, materials doped with heteroatoms have been regarded as promising absorbers. Herein, the Co@C, CoSe2@C, and hierarchical Co1-xS/Co9S8@C hollow microspheres were prepared using hydrothermal and subsequent carbonization, selenium, and vulcanization processes, respectively. The existence of anionic sites immensely affects the permittivity and conductivity of a composite. As a result, CoSe2@C and Co1-xS/Co9S8@C hollow microspheres showed improved conductivity and dielectric losses. Particularly, due to the multiphase transformation in the vulcanization process, the Co1-xS/Co9S8@C hollow microsphere possessed numerous heterogeneous interfaces and rich lattice defects, which led to local electronic redistribution and reinforced dielectric polarization. It exhibited a minimum reflection loss (RLmin) of −61.0 dB at a thinner thickness of 2.0 mm. This study contributes to the insight into the polarization loss mechanisms of multi-component and heteroatom doping composites and stimulates the design of high-efficiency MAMs.

Confinement and interface engineering boosting the capacitive performance by constructing NiCo-LDH@CoSe core-shell structure for supercapacitor

The strategic design of heterostructures in multicomponent composites is a promising approach for enhancing the properties of energy storage materials. While NiCo layered double hydroxide (NiCo-LDH) exhibits favorable ion exchange and redox capabilities, its nanostructure suffers from poor conductivity, leading to aggregation during charge and discharge cycles and compromising its electrochemical stability. This study presents the novel synthesis of NiCo-LDH@CoSe core-shell heterostructure using a two-step electrodeposition technique. The NiCo-LDH@CoSe heterojunction has remarkable electrochemical characteristics, boasting a high specific capacitance of 1965.4 F·g−1 at 1 A·g−1. It also exhibits an impressive rate performance of 74.4 % at 20 A·g−1, and retains 83.3 % of its capacitance after enduring 10,000 cycles at 30 A·g−1. The confinement and interface engineering of the heterojunction facilitate enhanced charge transfer from CoSe to NiCo-LDH, leading to exceptional performance and effectively addressing challenges such as poor conductivity, structural degradation, and nanoparticle clustering. The assembled NiCo-LDH@CoSe//AC hybrid supercapacitor also shows excellent performance. This research underscores the effectiveness of core-shell structure confinement and interface engineering in enhancing electrochemical performance.

ANALYSIS OF VARIANCE SPERMOGRAM INDICATORS OF MEN DIFFERENT AGE GROUPS WITH ASTENOZOOSPERMIA, TERATOZOOSPERMIA AND AZOOSPERMIA

In recent decades, a decline in male fertility due to deterioration in sperm quality hasbeen noted around the world. This is probably explained by the tendency to increase the diseasesof the male genital organs and, as a result, the increase in the percentage of male infertility.In addition, there is a deterioration of the quantitative and qualitative indicators of spermogramsin practically healthy men. The average number of sperm in the ejaculate of a healthy man hashalved over the past 50 years, and the average volume of ejaculate has decreased by one third. Itis known that the multicomponent composition of the internal male genital organs is in constantrestructuring due to age changes, functional activity and the influence of various factors. That iswhy it is important to take into account both physiological and age-related changes in a man'sability to conceive.Diagnosis of male infertility includes clinical research methods and methods of laboratory-instrumental examination. Among the latter, the most important for finding out the functionalstate of the gonads and the fertilizing ability of sperm is the study of ejaculate. The object ofour research was spermograms obtained during the examination of patients at the "AlternativeClinic" reproductive medicine clinic.The purpose of the work was using biometric analysis to the different indicators of menspermograms of younger, middle and older age groups with normozoospermia (N), asthenozoospermia(AZS), teratozoospermia (T) and azoospermia (A). The task of the research wasto analyze the main indicators of spermograms of men of different age groups in normal andpathological conditions, to conduct a one-factor and two-factor variance analysis of the influenceof the studied diseases and age factor.After analyzing the main indicators of spermograms of men of younger, middle andolder age groups with asthenozoospermia, azoospermia, and teratozoospermia, it was establishedthat the indicators that undergo the greatest deviations in the studied diseases are themobility of spermatozoa according to categories A and B, the morphology of spermatozoa, theFarris fertility index, and the activity of spermatozoa.After conducting a one-factor variance analysis, we established that the share of theinfluence of the studied diseases on the overall variability of such indicators of spermograms asthe mobility of spermatozoa according to category A and B and the morphology of spermatozoain the spermograms of men of the studied age groups is within 63–98% of the total contribution(younger age group), 60–96% (middle age group) and 75–96% (older age group). The shareof influence of unaccounted factors is within 2–40% of the total contribution. The share of theinfluence of the studied diseases in the overall variability of such indicators as the Farris index and sperm activity in the spermograms of men of all studied groups is significantly reducedand is within 22–44% of the total contribution. Instead, the influence of unaccounted factors(56–78% of the total contribution) is growing significantly. This may indicate the presence ofconcomitant diseases and other pathologies in the men who took part in the research.After conducting a two-factor variance analysis, we established that the shares of theinfluence of the studied diseases on the overall variability of such indicators of spermogramsas motility of spermatozoa according to category A and B, morphology of spermatozoa, Farrisfertility index and activity of spermatozoa are decisive and are within the range of 90.7–99.9%of the total contribution, the share of the influence of the age factor on the variability of spermogramindicators of men of different age groups is insignificant.