Multi-purpose Detector Research Articles

Collision energy dependence of elliptic flow of identified hadrons in heavy-ion collisions using the PHSD model

We report the first predictions of elliptic flow (v2) of identified hadrons at mid-rapidity (|y|< 1.0) in Au+Au collisions at Elab=6.7,8,11,and 25 A GeV using the Parton Hadron String Dynamics (PHSD) model. The transverse momentum (pT) dependence of identified hadron v2 in different centrality intervals (0-10%, 10-40%, and 40-80%) is shown. A clear centrality dependence of v2(pT) is observed for particles at Elab=6.7,8,11,and 25 A GeV. Within the PHSD model, the number of constituent quark (NCQ) scaling of v2 approximately follows in Au+Au collisions at all beam energies. A collision energy (sNN) dependence of π, K, and pv2 is studied in comparison with available published experimental data in the beam energy range of 6-25 A GeV. These predictions will help in interpreting the data from the forthcoming Compressed Baryonic Matter (CBM) experiment at the Facility for Antiproton and Ion Research (FAIR) and Multi-Purpose Detector (MPD) at the Nuclotron-based Ion Collider facility (NICA).

Cosmic ray test of shashlik electromagnetic calorimeter modules for NICA-MPD

The electromagnetic calorimeter (ECal) plays a critical role in high-energy particle colliders, by measuring the energy of particles that interact primarily via the electromagnetic interaction such as electrons, positrons and photons. Fudan University has undertaken part of the mass production of ECal modules for the Multi-Purpose Detector (MPD) project of the Nuclotron-based Ion Collider fAcility (NICA). Preliminary tests on the ECal modules is an essential step in detector construction. This article introduces the cosmic ray testing of the ECal modules produced by Fudan University. We tested the cosmic ray under the conditions of horizontal and vertical placement of the module, calculated the average number of generated photons, and estimated the module’s energy resolution. Moreover we analyzed the time resolution performance of the device. The test results indicate that when cosmic rays vertically traverse the entire ECal, the number of photons produced can reach 834, with a potential energy resolution less than 5%/E. The time resolution is 189ps. Based on the comprehensive test results, the production of the ECal meets the design requirements.

Bayesian approach to particles identification in the MPD experiment

Identification of particles generated by ion collisions in the NICA collider is one of the basic functions of the Multipurpose Detector (MPD). The main means of identification in MPD are the time-of-flight system (TOF) and the time-projection chamber (TPC). The article considers the optimization of the algorithms of particles identification by these systems. Under certain conditions, the use of the statistical Bayesian approach has made it possible to achieve an optimal ratio of the efficiency of particle identification and contamination by incorrectly defined particles.

Density dependent displaced vertex signatures as a novel probe of light dark sector scalars at the LHC

Dynamical theories of dark energy predict new degrees of freedom with particular environmental sensitivity to avoid constraints on fifth forces. We show that the similar, yet complementary multi-purpose detector setup of the ATLASand CMS experiments provides a unique opportunity to place sensitivity on such scenarios in a narrow, yet relevant parameter range. Furthermore, our investigation gives rise to a novel phenomenological signature that the LHC experimentscan pursue to exploit their complementary detector design from a BSM perspective.

Fast timing detectors for the muon system of a muon collider experiment: requirements from simulation and prototype performance

Looking at the future path of high-energy physics, a muon collider offers incomparable potential for discovery in the multi-TeV energy range. However, its development must address some relevant technological challenges, which arise from the short muon lifetime, 2.2 μs, and from the difficulty of producing large numbers of muons in groups with small emittance. The first one in particular leads to the production of the so-called Beam-induced Background (BIB), which affects the design of the machine and detector.The purpose of this contribution is to describe the expected performance of the muon system of a multipurpose muon collider detector designed to reconstruct the products of multi-TeV collisions with extreme accuracy.We are proposing a design of the muon system fully based on Micropattern Gaseous Detectors (MPGD), which foresees the combination of tracking layers based on Triple-GEM detectors, with a timing layer based on a new generation MPGD called Picosec. Picosec was developed in the last few years by the RD51 collaboration, with the aim of obtaining a fast timing (sub ns) MPGD.A dedicated R&D is ongoing to optimize such a technology for the application in a muon collider experiment, both from the detector and the mechanics point of views.This contribution will present the results obtained during the R&D of the Picosec technology for the muon collider both from laboratory tests and test beams performed in 2023. Special attention will be given to the performance obtained with different gas mixtures. Moreover, we will discuss the plans for the R&D dedicated to the muon collider.

Review of physics program at J-PET

The Jagiellonian - Positron Emission Tomograph (J-PET) is a multi purpose detector for tests of discrete symmetries and quantum entanglement of photons originating from the decay of positronium atoms. The research is per formed by measurement of angular correlations between photons from the an nihilations of the lightest leptonic bound system. The J-PET detector is the only device which enables determination of polarisation of photons from positronium annihilation together with estimation of positronium spin axis on the event-by-event basis. The novelty of the system is based on a usage of plastic scintil-lators as active detection material and trigger-less data acquisition system. The aim of two independent detection setups currently in use together with different annihilation chambers is to improve limits on C, CP and CPT symmetries and to search for the entanglement of photons originating from electron-positron annihilation. Additionally a precise measurement of ortho-positronium life time would allow to test of non-relativistic quantum electrodynamics and search for Mirror Matter.

HEP@home: A Volunteer Computing Project to Run Fast Simulation with Delphes for CEPC

Delphes is a C++ framework to perform a fast multipurpose detector response simulation. The Circular Electron Positron Collider (CEPC) experiment runs fast simulation with a modified Delphes based on its own scientific objectives. The CEPC fast simulation with Delphes is a High Throughput Computing (HTC) application with small input and output files. Besides, to compile and run Delphes, only ROOT software is necessary.Therefore, all these features make it appropriate to run CEPC fast simulation as a Volunteer Computing application. As a result, a BOINC project named HEP@home is developed to run fast simulation with Delphes for CEPC. This paper describes the internal structure of the project, pre and post data operations, and its development status.

Elliptic flow of inclusive charged hadrons in Au+Au collisions at E lab = 35 A GeV using the PHSD model

Elliptic flow (v 2) of inclusive charged hadrons at mid-rapidity (∣η∣ < 1.0) in Au+Au collisions at E lab = 35 A GeV using the parton hadron string dynamics (PHSD) model are presented as a function of centrality, transverse momentum (p T) and pseudo-rapidity (η). The v 2 results are obtained using the η-sub event plane method with respect to the event plane angle (ψ 2) and participant plane angle (). p T-integrated charged hadron v 2 shows a strong centrality dependence in Au+Au collisions at E lab = 35 A GeV. The eccentricity-scaled elliptic flow (v 2/ε 2) also shows centrality dependence. The higher values of v 2/ε 2 in central collisions suggest the development of stronger collectivity. The calculations are compared with the results from Au+Au collisions at published by the STAR experiment at RHIC. We also compare the results of HSD and PHSD modes to investigate the contribution of hadronic and partonic phases of the medium on the calculated v 2. The current results serve as a prediction of the collective behavior of the matter produced in baryon-rich and moderate temperature conditions for the upcoming multi-purpose detector at the nuclotron-based Ion collider facility (NICA) and compressed baryonic matter experiment at the facility for antiproton and ion research. These predictions are also useful for interpreting data measured at relativistic heavy ion collider (RHIC) beam energy scan program.

Elliptic flow of identified hadrons in Au+Au collisions at E_{lab} = 35~text {A}~text {GeV} using the PHSD model

We present predictions of elliptic flow (v_2) of identified hadrons at mid-rapidity (|y| < 1.0) in Au+Au collisions at E_{lab} = 35~text {A}~text {GeV} using the Parton Hadron String Dynamics (PHSD) model. The transverse momentum (p_{textrm{T}}) dependence of identified hadron v_2 in minimum bias (0–80%) and three different centrality intervals (0–10%, 10–40%, and 40–80%) are presented. A clear centrality dependence of v_2(p_{textrm{T}}) is observed for particles and anti-particles. We also present the p_{textrm{T}} dependence of v_2 difference ({Delta } v_2) between particles and corresponding anti-particles. A significant difference in v_2 values for baryons and anti-baryons is observed. Constituent quark scaling (NCQ) of v_{2} is investigated in Au+Au collisions. We also present a v_2(p_{textrm{T}}) ratio between the HSD and PHSD modes to explore the effect of hadronic and partonic interactions in the medium. These predictions are useful for interpreting the data measured in the Beam Energy Scan (BES) program at RHIC. They will also be useful for the future Compressed Baryonic Matter (CBM) experiment at the Facility for Antiproton and Ion Research (FAIR) and Multi-Purpose Detector (MPD) at the Nuclotron-based Ion Collider facility (NICA).

Centrality Selection Effect on Elliptic Flow Measurements in Relativistic Heavy-Ion Collisions at NICA Energies

The elliptic flow (v2) of produced particles is one of the important observables sensitive to the transport properties of the strongly interacting matter created in relativistic heavy-ion collisions. Detailed differential measurements of v2 are also foreseen in the future Multi-Purpose Detector (MPD) experiment at the Nuclotron based Ion Collider fAcility (NICA) at collision energies sNN = 4–11 GeV. Elliptic flow strongly depends on collision geometry, defined by the impact parameter b. Usually b is an input to theoretical calculations and can be deduced from experimental observables in the final state using the centrality procedure. In this work, we investigate the influence of the choice of centrality procedure on the elliptic flow measurements at NICA energies.

MPD TPC Alignment

A method of determining the position of the readout sectors of a time projection chamber using experimental data is proposed. Considering the results of modeling the response of sensitive elements of the time projection chamber of the multipurpose detector, three types of tracks were reconstructed: cosmic muons, beams of the laser detector system, and muons from the interaction of nuclei. Employing data from the experiment simulation and the proposed method of finding the position and orientation of sectors of the time projection chamber, the accuracy of the chamber alignment is investigated. For cosmic and laser rays, the accuracy is approximately the same. It is about 750 microns for the shift of the origin of the sector and 7 arc minutes for Euler angles. The accuracy in the case of muons born in collisions of nuclei is several times worse.

Machine learning and LHC event generation

First-principle simulations are at the heart of the high-energy physics research program. They link the vast data output of multi-purpose detectors with fundamental theory predictions and interpretation. This review illustrates a wide range of applications of modern machine learning to event generation and simulation-based inference, including conceptional developments driven by the specific requirements of particle physics. New ideas and tools developed at the interface of particle physics and machine learning will improve the speed and precision of forward simulations, handle the complexity of collision data, and enhance inference as an inverse simulation problem.

Feasibility Study of Hypernucleus Production at NICA/MPD

The NICA (Nuclotron-based Ion Collider fAcility) project at the Joint Institute for Nuclear Research (JINR, Dubna, Russia) is aimed at the construction of a new accelerator complex for heavy ions and polarized particles. Heavy-ion collisions at NICA are planned to be studied in the region of the highest net-baryon density, which favors the formation of bound nuclear systems with strangeness hypernuclei. The multipurpose detector (MPD) at NICA is designed to reconstruct interactions of relativistic nuclei in a high-multiplicity environment. In this paper, we report the feasibility study results for the reconstruction of Λ3H, Λ4H and Λ4He in Bi+Bi collisions at the nucleon-nucleon center-of-mass energy, sNN= 9.2 GeV.

Track-based alignment for the BESIII CGEM detector in the cosmic-ray test

The Beijing Electron Spectrometer III (BESIII) is a multipurpose detector operating on the Beijing Electron Positron Collider II (BEPCII). After more than ten years operation, the efficiency of the inner layers of the Main Drift Chamber (MDC) decreased significantly. To solve this issue, the BESIII collaboration is planning to replace the inner part of the MDC with three layers of Cylindrical triple Gas Electron Multipliers (CGEM).The transverse plane spatial resolution of CGEM is required to be 120μm or better. To meet this goal, a careful calibration of the detector is necessary to fully exploit the potential of the CGEM detector. In all the calibrations, the detector alignment plays an important role to improve the detector precision. The track-based alignment for the CGEM detector with the Millepede algorithm is implemented to reduce the uncertainties of the hit position measurement. Using the cosmic-ray data taken in 2020 with the two layers setup, the displacement and rotation of the outer layer with respect to the inner layer is determined by a simultaneous fit applied to more than 160000 tracks. A good alignment precision has been achieved that guarantees the design request could be satisfied in the future. A further alignment is going to be performed using the combined information of tracks from cosmic-ray and collisions after the CGEM is installed into the BESIII detector.

Prospects for the (Hyper)Nuclei Study in the Nica Energy Range

The production of nuclei and hypernuclei is of interest for experimental and theoretical studies: it is a big question how such weakly bound objects survive in a hot, dense environment and which new insights on the heavy-ion collisions dynamics they can bring us. We present the results on the hypernuclei feasibility study for the flagship Nuclotron-based Ion Collider fAcility (NICA)/Multi-Purpose Detector (MPD) experiment at the Joint Institute for Nuclear Research (JINR) in Dubna using the Parton-Hadron-Quantum-Molecular Dynamics (PHQMD) transport approach and a realistic reconstruction chain.

System upgrade for μBq/m3 level 222Rn concentration measurement

The Jiangmen Underground Neutrino Observatory (JUNO), a 20 kton multipurpose underground liquid scintillator detector, was proposed for the determination of the neutrino mass hierarchy as primary physics goal. The central detector will be submerged in a water Cherenkov detector to lower the background from the environment and cosmic muons. Radon is one of the primary background sources. Nitrogen will be used in several sub-systems, and a highly sensitive radon detector has to be developed to measure its radon concentration. A system has been developed based on 222Rn enrichment of activated carbon and 222Rn detection based on the electrostatic collection. This paper presents the detail of a μBq/m3 level 222Rn concentration measurement system and gives detailed information about how the adsorption coefficient was measured and how the temperature, flow rate, and 222Rn concentration affect the adsorption coefficient.

Simulation study on optical transmission performance and time resolution of Shashlik tower

The Shashlik tower is a significant component to measure the energy, time, and position of photons and electrons in the Electromagnetic Calorimeter (ECal), a vital detector of the Multi-Purpose Detector (MPD) in the Nuclotron-based lon Collider fAcility (NICA), Dubna, Russia. Based on the GEANT4 simulation toolkit, a variation of physical behavior in the tower was simulated, including the changes of photons during transmission, and used the rising edge detection method to measure the time-resolving ability of the module for natural muons and electron beams. Results show that 3 GeV electrons enter the tower, photons emitted by the scintillator are transmitted, 10665 photoelectrons are collected on Silicon Multipliers (SiPMs), yield is 3555 pe/GeV, and the light output is 0.16%. The time resolution of the module for muons is better than 160 ps, but the value of each tower is different. In addition, by changing the electron beam energy in the simulation, we observed that a larger number of photoelectrons collected by SiPMs leads to a better time resolution. At an electron beam energy of 1 GeV, the time resolution of the tower could be better than 101 ps. The simulated measuring results, and the methods of the tower photon transmission performance and the time resolution, will provide references and new optimum methods for subsequent experiential tests.

Elliptic Flow and Its Fluctuations from Transport Models for Au+Au Collisions at sNN = 7.7 and 11.5 GeV

The elliptic flow v2 is one of the key observables sensitive to the transport properties of the strongly interacting matter formed in relativistic heavy-ion collisions. In this work, we report on the calculations of v2 and its fluctuations of charged hadrons produced in Au+Au collisions at center-of-mass energy per nucleon pair sNN = 7.7 and 11.5 GeV from several transport models and provide a direct comparison with published results from the STAR experiment. This study motivates further experimental investigations of v2 and its fluctuations with the Multi-Purpose Detector (MPD) at the NICA Collider.

Studies of hadronic and heavy ion polarisation at NICA

The perspectives of the investigations of polarisation and spin asymmetries at the constructed Nuclotron-based heavy-Ion Collider fAcility (NICA) complex at Joint Institute for Nuclear Research (JINR) in Dubna are outlined. They include the studies of both hadronic spin structure at Spin Physics Detector (SPD)[1] and heavy ion spin physics at Multi-Purpose Detector (MPD)[2] and Baryonic Matter at Nuclotron (BM@N) detector. The specifics and similarities of relevant physics are discussed. The special role of Spin-1 tensor polarisation is stressed.

Use of biomass fuels predicts indoor particulate matter and carbon monoxide concentrations; evidence from an informal urban settlement in Fort Portal city, Uganda

BackgroundPoor indoor air quality (IAQ) is a leading cause of respiratory and cardiopulmonary illnesses. Particulate matter (PM2.5) and carbon monoxide (CO) are critical indicators of IAQ, yet there is limited evidence of their concentrations in informal urban settlements in low-income countries.ObjectiveThis study assessed household characteristics that predict the concentrations of PM2.5 and CO within households in an informal settlement in Fort Portal City, Uganda.MethodologyA cross-sectional study was conducted in 374 households. Concentrations of PM2.5 and CO were measured using a multi-purpose laser particle detector and a carbon monoxide IAQ meter, respectively. Data on household characteristics were collected using a structured questionnaire and an observational checklist. Data were analysed using STATA version 14.0. Linear regression was used to establish the relationship between PM2.5, CO concentrations and household cooking characteristics.ResultsThe majority (89%, 332/374) of the households used charcoal for cooking. More than half (52%, 194/374) cooked outdoors. Cooking areas had significantly higher PM2.5 and CO concentrations (t = 18.14, p ≤ 0.05) and (t = 5.77 p ≤ 0.05), respectively. Cooking outdoors was associated with a 0.112 increase in the PM2.5 concentrations in the cooking area (0.112 [95% CI: -0.069, 1.614; p = 0.033]). Cooking with moderately polluting fuel was associated with a 0.718 increase in CO concentrations (0.718 [95% CI: 0.084, 1.352; p = 0.027]) in the living area.ConclusionsThe cooking and the living areas had high concentrations of PM2.5 and CO during the cooking time. Cooking with charcoal resulted in higher CO in the living area. Furthermore, cooking outdoors did not have a protective effect against PM2.5, and ambient PM2.5 exceeded the WHO Air quality limits. Interventions to improve the indoor air quality in informal settlements should promote a switch to cleaner cooking energy and improvement in the ambient air quality.