Multi-point Boundary Value Problems Research Articles

Averaging of a normal system of ordinary differential equations of high frequency with a multipoint boundary value problem on a semi-axis

A multipoint boundary value problem for a nonlinear normal system of ordinary differential equations with a rapidly time-oscillating right-hand side is considered on a positive time semi-axis. For this problem, which depends on a large parameter (high oscillation frequency), a limiting (averaged) multipoint boundary value problem is constructed and a limiting transition in the Hölder space of bounded vector functions defined on the considered semi-axis is justified. Thus, for normal systems of differential equations in the case of a multipoint boundary value problem, the Krylov-Bogolyubov averaging method on the semi-axis is justified.

ON THE UNIQUE SOLVABILITY OF A BOUNDARY VALUE PROBLEM FOR DIFFERENTIAL EQUATIONS WITH PARAMETER

A linear boundary value problem for a differential equation with a parameter is investigated on a finite interval by the parameterization method. The studied boundary value problem with parameter is reduced to an equivalent multipoint boundary value problem with parameters by splitting the interval, introducing additional parameters at the points of splitting and new functions. The obtained equivalent boundary value problem contains Cauchy problems for ordinary differential equations with respect to new functions. By substituting the solution representation of the Cauchy problem into the boundary conditions and continuity conditions of the solution, a system of linear algebraic equations with respect to the introduced parameters is compiled. An algorithm for finding a solution to the boundary value problem with parameters is constructed. The formulation of the theorem on sufficient conditions of unique solvability of the boundary value problem with parameters is given. Sufficient conditions of its unique solvability are obtained in terms of the data of the original boundary value problem. An example showing the fulfillment of the conditions of the theorem is given.

IMPROVEMENT OF THE METHODOLOGY FOR OPTIMIZING THE PARAMETERS OF COMPLEX SYSTEMS UNDER THE INFLUENCE OF THERMAL LOAD SOURCES

The article investigates some aspects of solving the problem of constructing mathematical models for optimizing the parameters of local laser action on multilayer microbiological systems. The constraints on the desired laser parameters and on the temperature field in the material subject to laser fission are set. Verification of compliance with the restrictions on not exceeding the maximum value of the temperature field requires multiple calculations of the corresponding temperature field in the microbiological material. Control over the temperature field limits ensures the viability of its parts during the biotechnological process of laser fission. To construct adequate optimization mathematical models, the author substantiates the adequacy of the computational mathematical models describing the state of a microbiological system under the action of laser radiation sources. A multi-point boundary value problem with a system of inhomogeneous differential heat conduction equations for a multilayer microbiological medium is investigated and the correctness of this problem is substantiated for minor perturbations of the right-hand side of the differential equation. The results obtained in the article guarantee the adequacy of applied optimization mathematical models for finding rational values of technical parameters of laser emitters. In order to improve the accuracy of optimization of the technical parameters of laser emitters, the article presents a mathematical modeling of the preparatory stage of embryo defrosting. The presented mathematical models and methods of their implementation are necessary to improve the quality of embryo defrosting. Improvement of the methodology for solving applied biotechnological problems will certainly lead to the complication of mathematical models, but it will increase the accuracy of calculation and optimization of technical parameters of the biotechnological process of laser embryo division.

Research on Lateral Load Bearing Characteristics of Deepwater Drilling Conductor Suction Pile

The vast reserves of natural gas hydrates in offshore areas present significant challenges to development. Surface well construction technology is crucial for the extraction of deepwater natural gas hydrates. To ensure the safety of the subsea wellhead during the drilling process for deepwater natural gas hydrates, a novel conductor suction pile device has been designed, comprising a combination of suction piles and surface conductors. And research has been conducted to investigate the lateral stability characteristics of the conductor suction pile. Drawing upon the pile foundation load-bearing theory and the equilibrium of the differential element, a theoretical analysis model and corresponding governing equations of the conductor suction pile system are established. A solution for a multi-point boundary value problem by simplifying the conductor suction pile system into a two-end free beam is proposed. The governing equations are then converted into a first-order differential equation system, and the four-stage Lobatto IIIa collocation method program for the multi-point boundary value problem is developed and resolved using MATLAB 2023a. Furthermore, a case study of a well in the South China Sea elucidates the effects of wellhead load and seabed soil properties on the lateral load-bearing capacity of the conductor suction pile system, verifying the collocation method’s validity against the results from the finite difference method. After conducting a comparative analysis of the lateral load-bearing performance between conductor suction piles and traditional surface conductors, it is observed that conductor suction piles exhibit lower horizontal displacement and bending moments compared to surface conductors. Therefore, conductor suction piles demonstrate a substantial safety margin. The research findings provide a theoretical basis for the lateral stability of conductor suction piles during deepwater natural gas hydrate drilling. This offers a safe and efficient method for surface well construction in the extraction of natural gas hydrates.

A study of the multipoint boundary value problem for nonlinear differential equations of arbitrary fractional order based on the fixed point theorem for composite nonlinear operators

Abstract The existence and distinctiveness of solutions, as well as the iterative approximations of the distinctive answer to the initial boundary value issue of nonlinear differential equations, may be solved with the help of the theory of nonlinear operators, which offers a strong theoretical guarantee and a fundamental tool. In this work, we examine the fixed point theory for composites nonlinear operators, which may offer a fresh approach to solving linear differential equations having arbitrary order fractional multipoint boundary value problems. The existing result of the boundary value issue’s solution is confirmed by the fixed point theorem for composites nonlinear operators, and the four-point boundary value problem for fractional-order linear equations of the Riemann-Liouville type is examined. A group of fractional-order nonlinear differential equations with deviating quantities are examined to examine the presence of an unusual positive solution for this boundary value problem. The existence of this unique positive solution is determined by the use of both the mixed monotone operator and the combined nonlinear operator fixed point theorem. Ultimately, the nonlinear Bagley-Torvik equation with a fractional order variable coefficient four-point boundary value problem is converted into a Fredholm-Hammerstein integral the formula of the second type with weakly singular or continuous kernels, and the fixed point principle is used to demonstrate the uniqueness of the solution in the space of continuous functions. Approximate solutions are provided for the second class of nonlinear Fredholm-Hammerstein integral equations with weakly singular kernels. The outcomes demonstrate the applicability and validity of the fixed point theorem to composite nonlinear operators, offering a fresh approach to solving the multipoint boundary value issue for nonlinear differential equations of any fractional order.

Solvability for a Higher Order Implicit Fractional Multi-point Boundary Value Problems at Resonance

Solvability for a Higher Order Implicit Fractional Multi-point Boundary Value Problems at Resonance

AVERAGING METHOD FOR MULTI-POINT BOUNDARY VALUE PROBLEMS OF SET-VALUED FUNCTIONAL DIFFERENTIAL EQUATIONS

AVERAGING METHOD FOR MULTI-POINT BOUNDARY VALUE PROBLEMS OF SET-VALUED FUNCTIONAL DIFFERENTIAL EQUATIONS

Well-posedness criteria for one family of boundary value problems

This paper considers a family of linear two-point boundary value problems for systems of ordinary differential equations. The questions of existence of its solutions are investigated and methods of finding approximate solutions are proposed. Sufficient conditions for the existence of a family of linear two-point boundary value problems for systems of ordinary differential equations are established. The uniqueness of the solution of the problem under consideration is proved. Algorithms for finding an approximate solution based on modified of the algorithms of the D.S. Dzhumabaev parameterization method are proposed and their convergence is proved. According to the scheme of the parameterization method, the problem is transformed into an equivalent family of multipoint boundary value problems for systems of differential equations. By introducing new unknown functions we reduce the problem under study to an equivalent problem, a Volterra integral equation of the second kind. Sufficient conditions of feasibility and convergence of the proposed algorithm are established, which also ensure the existence of a unique solution of the family of boundary value problems with parameters. Necessary and sufficient conditions for the well-posedness of the family of linear boundary value problems for the system of ordinary differential equations are obtained.

Exploring Integral ϝ-Contractions with Applications to Integral Equations and Fractional BVPs

In this article, two types of contractive conditions are introduced, namely extended integral Ϝ-contraction and (ϰ,Ω-Ϝ)-contraction. For the case of two mappings and their coincidence point theorems, a variant of (ϰ,Ω-Ϝ)-contraction has been introduced, which is called (ϰ,Γ1,2,Ω-Ϝ)-contraction. In the end, the applications of an extended integral Ϝ-contraction and (ϰ,Ω-Ϝ)-contraction are given by providing an existence result in the solution of a fractional order multi-point boundary value problem involving the Riemann–Liouville fractional derivative. An interesting existence result for the solution of the nonlinear Fredholm integral equation of the second kind using the (ϰ,Γ1,2,Ω-Ϝ)-contraction has been proven. Herein, an example is established that explains how the Picard–Jungck sequence converges to the solution of the nonlinear integral equation. Examples are given for almost all the main results and some graphs are plotted where required.

Multipoint boundary value problem for a coupled system of psi-Hilfer nonlinear implicit fractional differential equation

This study examines the existence and uniqueness of the solution to the coupled system of the ψ-Hilfer nonlinear implicit fractional multipoint boundary value problem. The uniqueness is shown by the Banach contraction principle, and the existence is shown by Krasnosel’skii’s fixed point theorem in a special working space. An example is presented to verify our results. The existence and uniqueness of the solution are analysed graphically.

Multipoint Boundary-Value Problem of Optimal Control for Parabolic Equations with Degeneration

Multipoint Boundary-Value Problem of Optimal Control for Parabolic Equations with Degeneration

Study on the Multi-Point Boundary Value Problem for Second-Order Nonlinear Impulsive Integro-Differential Equation

In the field of biological control, there are a large number of systems that gradually evolve over a certain period of time. However, due to some natural or human intervention behavior, the system state will be subjected to some relatively short time interference, so that the system state changes in an instant. This sudden change of state makes the system not simply described by continuous or discrete dynamical systems, but by means of impulse dynamical systems. In this paper, the multi-point boundary value problem of a class of second-order nonlinear impulsive integral differential equations is studied on the basis of impulsive differential equation theory. The main results of this kind of equation are obtained by using the fixed point theorem of strict set contraction operator. Under certain assumptions, the existence of the solution of the equation is proved by constructing the operator on the special cone. Finally, combined with the practical application, the theory was applied to the stability prediction of biological ecosystem, and the correctness of the conclusion was verified.

Averaging for a High-Frequency Normal System of Ordinary Differential Equations with Multipoint Boundary Value Problems

Averaging for a High-Frequency Normal System of Ordinary Differential Equations with Multipoint Boundary Value Problems

RESEARCH OF COMPUTATIONAL MATHEMATICAL MODELS FOR TECHNICAL SYSTEMS

In the theory of analysis and synthesis of technical systems, mathematical modelling and optimization of multilayer systems containing sources of physical fields occupy an important place. This is due to the fact that their state is described by means of boundary value problems with multidimensional differential equations. To solve the boundary value problems and implement the process of optimizing the technical parameters of the modelled systems, it is necessary to conduct interdisciplinary studies of computational and applied optimization mathematical models. Fulfilment of the conditions for the existence of a single solution to boundary value problems by default is possible only when the object of study is a single-layer material under the action of load sources. If it is necessary to calculate and optimize the technical parameters of a multilayer material subjected to load sources, then it is impossible to immediately guarantee the correctness of the calculated and applied optimization mathematical models, since it is necessary to obtain the conditions for the existence and uniqueness of solutions to boundary value problems with systems of differential equations. Maximizing the technical parameters of load sources and averaging the characteristics of material layers will lead to approximate values of the objective function and technical parameters of the modelled system, which leads to irrational consumption of energy and heat resources and uncontrolled losses, and useless losses of the test material in the technological process. The article presents the conditions for the correctness of multipoint boundary value problems with multidimensional differential equations describing the state of a multilayer material under thermal action. It is advisable to use these studies to substantiate the correctness of other technical and biotechnological systems, which will increase the accuracy of the implementation of applied optimization problems of economic and mathematical modelling.

On a problem for a delay differential equation

The article considers a nonlinear boundary value problem for a linear delay differential equation. To solve the problem, the idea of parametrization method, namely, the interval at which the problem is being considered, is divided into subintervals whose lengths do not exceed the values of the constant delay; constant parameters are introduced at the left ends of these intervals; a new unknown function is introduced at each subinterval. Thus, the problem under consideration is reduced to an equivalent multipoint boundary value problem for differential equations with delay containing parameters. Auxiliary Cauchy problems without delay with zero initial conditions at the left ends of the subintervals are consistently considered on each of the subintervals. Using an analog of the Cauchy formula to represent the solution of a system of linear differential equations on each of the subintervals and given nonlinear boundary conditions, an algebraic system with respect to unknown parameters is obtained. The article proposes an algorithm for finding a solution to a multipoint boundary value problem for differential equations with a delay containing parameters. At each step of the algorithm, a system of nonlinear algebraic equations is solved to determine the values of the parameters, and an analog of the Cauchy formula is used to obtain solutions to auxiliary Cauchy problems. The results obtained are demonstrated on a test problem.

Multipoint boundary value problems for higher-order Hadamard fractional neutral differential equations and inclusions

In this paper, we consider fractional neutral differential equations with multipoint boundary value conditions involving Hadamard derivatives and integrals. We obtain the existence and uniqueness of the solution of the equation by using several fixed point theorems, and we also consider the Ulam–Hyers stability of the solution. In addition, we study the differential inclusion problem with multipoint boundary value conditions and prove the existence of the solution of the boundary value problem when the multivalued map has convex values. We also give several examples to illustrate the feasibility of the results.

Existence and nonexistence results for fifth-order multi-point boundary value problems involving integral boundary condition

Existence and nonexistence results for fifth-order multi-point boundary value problems involving integral boundary condition

A New Approach for Solving a New Class of Nonlinear Optimal Control Problems Generated by Atangana-Baleanu- Caputo Variable Order Fractional Derivative and Fractional Volterra-Fredholm Integro-Differential Equations

In the sequel, the numerical solution of a new class of nonlinear optimal control problems (OCPs) generated by Atangana-Baleanu-Caputo (ABC) variable order (V-O) fractional derivative (FD) and fractional Volterra-Fredholm integro-differential equations (FVFIDEs) is found by Bezier curve method (BCM). The main idea behind this work is the use of the BCM. In this technique, the solution is found in the form of a rapid convergent series. Using this method, it is possible to obtain BCM solution of the general form of multipoint boundary value problems. To shown the efficiency of the developed method, numerical results are stated as the main results in this study.

Lyapunov-type inequalities for fractional multi-point boundary value problems using a new generalized fractional derivative

Lyapunov-type inequalities for fractional multi-point boundary value problems using a new generalized fractional derivative

Study of multilayer flow of a bi-viscous Bingham fluid sandwiched between hybrid nanofluid in a vertical slab with nonlinear Boussinesq approximation

Bi-viscosity Bingham plastic fluids are used to understand the rheological characteristics of pigment–oil suspensions, polymeric gels, emulsions, heavy oil, etc. In many industrial and engineering problems involving high-temperature situation, a linear density-temperature variation is inadequate to describe the convective heat transport. Therefore, the characteristics of the nonlinear convective flow of a bi-viscous Bingham fluid (BVBF) through three layers in a vertical slab are studied. The two outer layers of the oil-based hybrid nanofluid and the intermediate layer of BVBF are considered. The thermal buoyancy force is governed by the nonlinear Boussinesq approximation. Continuity of heat flux, velocity, shear stress, and temperature are imposed on the interfaces. The governing equations are derived from the Navier–Stokes equation, conservation of energy, and conservation of mass for three layers. The nonlinear multi-point (four-point) boundary value problem is solved using the differential transform method (DTM). Converging DTM solutions are obtained, and they are validated. The entropy equation and Bejan number were also derived and analyzed. It is established that the nonlinear density–temperature variation leads to a significant improvement in the magnitude of the velocity and temperature profiles due to the increased buoyancy force, and as a result, the drag force on the walls gets reduced. The drag force on the slab gets reduced by decreasing the volume fraction of nanoparticles. Furthermore, nonlinear convection and mixed convection give rise to an advanced rate of heat transport on the walls and thereby to an enhanced heat transport situation.