Multi-input Multi-output Antenna Research Articles

Development and comprehensive evaluation of a dual-port textile UWB MIMO antenna for biomedical use

In this paper, a textile two-port multi-input multi-output (MIMO) half-circle antenna with corrugated borders is designed and fully analyzed for nearfield ultra-wideband biomedical diagnostic applications. The orthogonal polarization technique is introduced for mutual coupling reduction, signal quality, and imaging accuracy improvement. A low pass filter with significant out-of-band rejection is inserted between the two MIMO structural elements to improve the isolation from element to element. For simple system integration, A 50 ohms feed coplanar waveguide is suggested for each element. The entire antenna is constructed using textile materials, with the radiating element composed of conductor fabric. The substrate, on the other hand, is crafted from cotton material which possesses a relative permittivity of and a tan δ value of 0.025. The size of each antenna element has low-profile dimensions of 40 × 40 × 0.3 mm3\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${mm}^{3}$$\\end{document}. The measured results obtained demonstrate an extremely broad bandwidth extends from 2.5 GHz to 12 GHz. Omnidirectional radiation pattern is obtained, with 6 dBi maximum gain and 96% efficiency. In order to ensure flexibility, a range of bending conditions were analyzed, and the durability was assessed through wash ability testing. Safety was confirmed by measuring the specific absorption rate. Furthermore, time domain and MIMO performance assessments were performed to ensure its suitability for imaging systems.

FSS based high gain optically transparent MIMO antenna for Sub-6 GHz 5G mid-band applications

A novel optically transparent Multi Input Multi Output (MIMO) antenna design positioned on a Frequency-Selective Surface (FSS) for gain improvement while maintaining a simple fabrication procedure. Transparent conductive materials inherently exhibit higher sheet impedance due to lower conductivity, resulting in decreased antenna gain and radiation efficiency. To address this limitation, an optically transparent FSS is incorporated beneath the MIMO structure to improve radiation characteristics. Utilizing a Malinex substrate and a conductive silver oxide sheet, the 4-element MIMO design achieves both transparency and MIMO operability. The operational bandwidth spans from 3.09 GHz to 3.7 GHz, with a percentage bandwidth of 17.96 %, ensuring port isolation of over 20 dB. With the presence of the FSS, a consistent gain enhancement of approximately 3.46 dBi is achieved, with an average gain within the band reaching 4.56 dBi. The proposed design employs a simplified fabrication process while addressing aesthetic concerns and providing a solution to the existing issue of low gain in conductive metal oxide-based transparent antennas.

Four port MIMO antenna for IoT applications in public safety band and sub-6 GHz TDD 5G band

This paper proposes a Multi Input Multi Output (MIMO) antenna specifically developed for Internet of Things (IoT) Applications in Public Safety 4.9 GHz (4940–4990 MHz) band and Sub-6 GHz TDD 5G band (4800–4990 MHz). The proposed MIMO antenna consists of Koch fractal element, and it is introduced in four port configuration. HFSS is used to design, analyze, and optimize the performance parameters of the introduced MIMO antenna. To achieve optimum performance in terms of isolation, initially all two radiating elements of 1 × 2 MIMO configuration with varying orientations have been evaluated, which are positioned on top of a cost-effective FR4 substrate. Later on 2 × 2 and 1 × 4 MIMO configurations are evaluated; and 1 × 4 configuration is fabricated and tested in lab for the verification of simulated results. The MIMO antenna demonstrates resonance at 4.97 GHz, offering a bandwidth of 320 MHz (4795–5115 MHz). It exhibits excellent performance with Envelope Correlation Coefficient (EC-C) < 0.4, Diversity Gain (D-G) > 9.8, Mean Effective Gain (ME-G) < 3 dB, Total Active Refection Coefficient (TAR-C) < −14 dB, Channel Capacity Loss (CC-L) < 0.4 bits/s/Hz, and Isolation < −20 dB across the entire operating frequency range. The proposed MIMO antenna has a maximum gain of 1.2 dBi and radiation efficiency (η) of 80%. This proposed antenna offers several advantages over traditional ones, including high efficiency (η), low CC-L, and significant isolation, even without the use of special techniques to achieve isolation.

Dual-band independently tunable 8-element MIMO antenna for 5G smartphones

In this paper, a multi-input multi-output (MIMO) antenna for future mobile phone applications operating in sub-6 GHza using a novel combination of an E-shaped slot placed on the ground plane and an F-shaped probe is used to achieve a dual-band independently tunable antenna. The proposed antenna is not only self-isolated but it has also effectively achieved high isolation of greater than 17 dB in both 3.5 GHz (3.4 – 3.6 GHz) and 4.7 GHz (4.6 – 4.87 GHz) frequency bands for 8-element MIMO antenna configuration for 5G smartphones. The simple yet compact size of (0.035 λ0▪ 0.23 λ0), of the slot antenna produces a balanced slot mode which not only reduces the ground effects but also improves the isolation between two adjacent input ports. The novelty of the proposed dual-band MIMO antenna is its independent control of each band across a wide frequency band and results demonstrate higher efficiency (64% – 71%) and diversity gain performance in both frequency bands. Furthermore, the antenna is designed by the meticulous configurations of 8-antenna elements without employing any external decoupling structure to attain the desired polarization diversity. The prototype of this 8-element MIMO antenna is also fabricated and measured to validate its simulated performance. The simple structure of the proposed design and high efficiency makes it a promising candidate for 5G smartphones.

A miniaturized-slotted planar MIMO antenna with switchable configuration for dual-/triple-band notches

This paper outlines the design and validation of a four-port compact Multi-Input Multi-Output (MIMO) antenna engineered to provide reconfigurable band notches within the ultra-wideband spectrum. The antenna features a circular monopole engraved with split ring slots along its radiating section, while a U-shaped slot is etched onto the feed line to facilitate band notches at specific frequencies—4.3 GHz (corresponding to INSAT), 6.8 GHz (aligned with Wi-Fi-6E), and 8.3 GHz (pertaining to X-band satellite). To ensure proper isolation, the MIMO elements are arranged orthogonally, and a decoupling periodic structure is strategically interposed between these elements to enhance isolation further. The incorporation of a PIN diode within the U-shaped slot introduces reconfigurability into the band notching mechanism. The MIMO antenna operates in two distinct modes depending upon the state of the PIN diode, either activated (ON) or deactivated (OFF). In the former mode, the antenna offers switchable band notches across three frequencies, while in the latter mode, it offers band notches at two specific frequencies. The validity of the antenna’s performance is validated through real-time fabrication and measurement. Both simulated and measured results exhibit a notable correlation. The antenna stands as an appropriate candidate for future cognitive radio applications.

Comprehensive review of isolation techniques in MIMO antennas for 5G mobile devices

Recently, due to the fast development in multimedia applications of wireless communication systems and the urgent demands of increasing the capacity and data rates to meet the requirements of 5G mobile communication systems, new transmission techniques are needed. One of the powerful enabling tools of the 5G communication systems is the Multi-Input Multi-Output (MIMO) antenna system employing multiple antennas and utilizing the multipath fading mobile environment to increase the channel capacity without any additional bandwidth and/or transmitted power. However, because of the limited space of the mobile devices, the distances between antennas are decreased. The mutual coupling between antennas severely affects the overall performance of the MIMO system. So, isolation improvement methods are applied to reduce these influences. In this review, the different isolation techniques and their features and drawbacks are presented, and the techniques for applying them in modern MIMO antenna systems are illustrated. Besides, the performance characteristics of these MIMO systems are compared. The review contains also the basic concepts of the MIMO antenna system and its performance metrics. Finally, the future directions and trends for the MIMO antenna system design are discussed briefly.

A novel dual-band–high-gain terahertz MIMO antenna

In this study, a terahertz dual-band–high-gain, multi-input–multi-output (MIMO) antenna with two and four input ports was realized, with gain values of up to 7.16[Formula: see text]dBi and 6.44[Formula: see text]dBi, respectively. This represents an increase in gain of 102.4% and 81.8%, respectively, compared to single-input port antennas. By calculating and analyzing the voltage standing wave ratio (VSWR), gain, envelope correlation coefficient (ECC), and diversity gain, the two MIMO antennas achieved perfect impedance matching at their resonance points. Moreover, the interference between the elements of the MIMO antenna was small, and an isolation effect between the units was realized. These MIMO antennas can achieve multiple input signals to regulate the antenna radiation performance and improve signal strength and quality. In addition, they possess good development prospects for achieving high-speed data transmission in the terahertz band and in mobile communication.

A broadband metamaterial superstrate based MIMO antenna array for sub-6 GHz wireless applications

A circularly polarised Multi-Input Multi-Output (MIMO) array antenna integrated with the metamaterial superstrate is proposed and developed. The proposed antenna configuration includes a substrate and superstrate, featuring a 2x2 array MIMO setup on the substrate, and a metamaterial layer configuration setup on the superstrate. Although use of metamaterial superstrate enhances the antenna performance, an air gap between the substrate and superstrate is introduced to further enhance the performance. This proposed antenna configuration significantly broadened the impedance bandwidth to 24.3 % (2.9–3.7 GHz), a substantial improvement compared to the MIMO antenna alone, which achieved only 2.85 % (3.46–3.56 GHz). Furthermore, it substantially increased the axial ratio bandwidth to 17.7 % compared to only 0.86 % of MIMO itself. Additionally, the peak realized gain increased from 2.5 dBic to 11.5 dBic. Operating effectively within the 2.9–3.7 GHz frequency range, the proposed antenna achieves port isolation < -30 dB between its ports making it suitable for MIMO applications. The proposed antenna occupies a volume of 1.4 λ x 2.8 λ x 0.09 λ excluding the connectors.

Multi-Input Multi-Output Antenna Array Design for 5G N78 Applications in Smartphones

This article presents a compact, high isolation Multi Input Multi Output (MIMO) Antenna system operating on (3408-3760) MHz for the fifth generation N78 Applications in mobile phone terminals. The suggested MIMO antenna system is built from four antenna elements. These antennas are placed over two slim side borders of a mobile device's frame to adhere to the current trend of slim and full-screen smartphone devices. The antenna element is composed of two parts: the front part and the back part. The front part consists of the second iteration of Moore curve fractal geometry and an I-shaped feeding line. The back part is of an L-shaped shorted to the system’s ground plane. The desirable antenna diminishment is accomplished based on Moore curve fractal geometry. Low mutual coupling among antennas is attained based on self-isolated and spatial diversity methods, which are less than -16.6 dB. The scattering parameters, antenna gains, antenna efficiencies, and radiation pattern characteristics have all been examined to gauge the performance of the suggested antenna element. In addition, the MEGs and ECCs are examined to understand the MIMO performance of the suggested system. The proposed four-element MIMO antenna system achieves the desired antenna and MIMO characteristics, making it a strong contender for the upcoming 5G mobile devices.

CSRR loaded multiband THz MIMO antenna for nano-communications and bio-sensing applications

In this paper, a multiband THz Multi-Input Multi-Output (MIMO) antenna is designed with dimensions of 80×100×10.8μm³. The antenna is made-up on a gold-plated Arlon AD410 substrate with a relative permittivity of 4.1.It operates at three resonant frequencies, namely 1.45THz, 2.25THz, and 3.25THz, achieved through the integration of Complementary Split-Ring Resonator (CSRR) and Substrate Integrated Waveguide (SIW) technologies. The two-element MIMO configuration of the antenna ensures exceptional performance, offering high throughput with data rates of 25.23Gbps for the Quadrature Phase Shift Keying (QPSK) scheme and 56.68Gbps for the 16-Quadrature Amplitude Modulation (QAM) scheme. It also exhibits remarkable channel capacity, approximately 8.2bps/Hz at Signal-to-Noise Ratio (SNR) = 20dB, surpassing the capabilities of single-element antennas. Moreover, it demonstrates excellent diversity performance for judging the MIMO antenna performance. This is evident through the following key metrics: Envelope Correlation Coefficient (ECC) < 0.02, indicating that less than 1 % of power is transferred from the excited antenna to the second 50Ω terminated antenna when antenna-1 is excited; Directive Gain (DG) >9.95dB; Total Active Reflection Coefficient (TARC) < -10dB, ensuring that a minimum of 90 % of the power is delivered to the patch port; and Channel Capacity Loss (CCL) < 0.35 bits/sec/Hz, guaranteeing reliable wireless communication. The antenna boasts peak gains of 3.83dBi, 4.06dBi, and 6.82dBi at 1.45THz, 2.25THz, and 3.25THz, respectively, along with a radiation efficiency of approximately 37, 58, and 51 % at the corresponding frequencies. Notably, the first two bands (1.34-1.51THz and 2.20-2.28THz) exhibit narrow bandwidths with quality factors above 80, making them particularly suitable for sensing applications in biomedical. Band-1 offers an average sensitivity of 3222.22 GHz/RIU and an FOM of 17.89, while Band-2 provides an average sensitivity of 2578.68 GHz/RIU and an FOM of 14.38. These characteristics make it well-suited for near-field Nano-communications and sensing applications.

Dual-Band (28/38 GHz) Compact MIMO Antenna System for Millimeter-Wave Applications

The present work proposes a novel design of a dual-band-printed antenna for operation at the millimeter-wave frequencies 28 and 38 GHz that are utilized for the modern and future generations of mobile communications. The antenna is composed of two radiating elements. The first element is the main patch that is fed through a microstrip line with inset feed, and the second element is a parasitic element that is fed through capacitive coupling with the main patch. The design parameters of the proposed antenna are optimized through a complete parametric study to give excellent impedance matching at 28 GHz over the band 27.7–28.3 GHz and at 38 GHz over the band 37.7–38.3 GHz. The surface current distributions at the two operational frequencies are investigated. The designed antenna is used to construct a four-port efficient multi–input–multi–output (MIMO) system. The MIMO system performance is investigated regarding the envelope correlation coefficient (ECC), diversity gain (DG), and the channel capacity loss (CCL) showing very good performance. The single-element antenna and the MIMO are fabricated and experimentally evaluated showing excellent impedance matching over the lower and higher frequency bands, which come in agreement with the simulation results. It is shown that the antenna produces maximum gain of 7.4 and 8.1 dBi at 28 and 38 GHz, respectively. The average radiation efficiencies of the proposed antenna are 88% and 88.8% over the lower and higher frequency bands, respectively. In addition, the coupling coefficients between the MIMO antenna systems are measured experimentally showing very low coupling values resulting in an efficient MIMO system that is suitable for future millimeter-wave (mm-wave) applications.

Quad-Element MIMO Antenna System Using Half-Cut Miniaturized UWB Antenna for IoT-Based Smart Home Digital Entertainment Network

This work presents a miniaturized quad-element multi-input multi-output (MIMO) antenna with low mutual coupling, inherent isolation, and easy upgradability for an Internet of Things (IoT) based high-speed smart digital entertainment network using ultra-wideband (UWB) technology. Ultra Wideband (UWB) technology is anticipated to play a significant role in the future IoT based smart systems due to its ability to provide high precision location information, low power consumption, high data rates and secure communication. An elliptical quadrant-shaped radiator with a C-shaped protuberant ground plane is conceptualized as a quasi-monopole UWB antenna following the half-cut miniaturization approach with very compact dimensions of 18W11 mm2. The elliptical quadrant radiator in combination with C-shaped ground plane introduces multi-resonance characteristic in addition to providing better impedance matching with miniaturization and inherent high isolation for MIMO configuration. The single element antenna is then organized in an orthogonal arrangement with an edge-to-edge distance of 5 mm to develop a quad-element MIMO antenna system. The MIMO antenna structure realizes a wide bandwidth of 3.14-11.23 GHz (center frequency at 7.19 GHz), peak gain of 7.2 dBi, and radiation efficiency of above 60% with good isolation (>-20 dB) between the adjacent elements without employing any dedicated decoupling structure. The diversity performances of the proposed MIMO antenna are relatively good, with a very low envelope correlation coefficient (ECC) of less than 0.35 and diversity gain (DG) nearly at 10. Further, the total active reflection coefficient (TARC) <-10 dB and channel capacity loss (CCL) <0.4 bit/s/Hz, parameters are witnessed to be within acceptable limits. The simulated and measured results agree well, testifying that the proposed four-element MIMO antenna is suitable for UWB applications.

Dual port asymmetrical dumbbell-shaped dielectric resonator-based MIMO antenna with pattern diversity for wideband applications

ABSTRACTIn this article, a wideband ceramic-based dual port MIMO (Multi Input Multi Output) antenna is investigated and analyzed. Wideband features are obtained with the assistance of asymmetrical dumbbell-shaped cylindrical ceramic. Triple-band circular polarized waves are also obtained with an S-shaped aperture having unequal strip length. Other special characteristic of the proposed MIMO radiator is to achieve bidirectional pattern diversity by placing radiators in opposite direction. Measured outcomes confirm that the proposed radiator offers a fractional bandwidth of 65.04% (4.02 to 7.89 GHz) with less than −25 dB mutual coupling between two identical ports. In between the three frequencies range, i.e., 4.75 to 5.02 GHz, 5.75 to 6.2 GHz, and 7.55 to 7.82 GHz, the value of axial ratio is well below the value of 3 dB. Measured far-field pattern and diversity parameters authorize the appropriateness of the proposed radiator in MIMO system.

Miniaturized MIMO antenna design based on octagonal-shaped SRR metamaterial for UWB applications

A miniaturized antenna based on octagonal-shaped split ring resonator (O-SRR) metamaterial and CPW-feeder technique for ultra-wideband (UWB) applications is developed in this research. The structure of the component cell monopole antenna is designed by using a triangle-shaped fractal method and merging metamaterial implementation with the L-stub shape. These techniques provide a wide impedance bandwidth for the innovative wireless antenna, which operates from 2.46 to 13.98 GHz. The planned module cell dimensions are 20 by 16 square millimetres (0.164λL×0.131), where the wavelength (λL) is 121.95 mm. This low-profile antenna has then been employed to design an array of 2 × 2 Multi Input Multi Output (MIMO) antennas with an overall size of 20 × 34 mm2. Two symmetric antennas are arranged in the designed miniaturized MIMO system with an inverted T-shaped decoupling copper between them. Measurement results show that the dual antenna with multiple diversity metrics has great characteristics for MIMO applications due to providing low mutual coupling value, lower than 0.30 bits per s. /Hz of channel capacity loss, minor envelope correlation coefficient of fewer than 0.003, lower −10 dB of total active reflection coefficient, greater than 9.96 dB of diversity gain and proper mean effective gain (MEG ratio ≈ 1, MEG ≤ 0.5). A high peak gain magnitude of 5.71 dBi is provided at an operating frequency of 13.2 GHz for the recommended single antenna.

Circularly polarized MIMO filtering dielectric resonator antenna for 5G sub-6 GHz applications

This research presents an innovative hexagonal dielectric resonator antenna (DRA) with circular polarization and multi-input multi-output (MIMO) characteristics. The DRA consists of two dielectric layers, providing a fractional bandwidth of 9% (4.05 to 4.38 GHz).The antenna ground plane features has an S-shape slot, when coupled with a 50Ω microstrip line, enables the generation of right-hand circular polarization. To enhance performance, the feed line includes a bandpass filter with a semi-elliptical form, resulting in outstanding selectivity. The proposed design demonstrates a gain of 9.2 dBi and encompasses a 3 dB axial ratio bandwidth of 9.29%. The proposed design is fabricated, and a comparison is made between the simulated and the measured results. Furthermore, the study introduces a MIMO antenna system by combining two filter arrays. The MIMO antenna demonstrates a reasonable port isolation of >25 dB across the operating band with acceptable MIMO parameters.

Design and Implementation of a Planar MIMO Antenna for Spectrum-Sensing Applications

Spectrum sensing is an important aspect in cognitive radio (CR) networks as it involves the identification of unused frequency spectra, which saves both bandwidth and energy. The design of a compact super-wideband (SWB) multi-input multi-output (MIMO)/diversity antenna with triple-band-notched features is presented for spectrum sensing in CR systems. The MIMO antenna comprises four identical semi-elliptical-shaped monopole resonators, which are orthogonally positioned and excited individually via tapered coplanar waveguide feed lines. Also, a mirror-slot analogous to the radiator is etched in the ground conductor of each antenna element to achieve SWB characteristics. In order to avoid interference with the SWB, the antenna radiator is loaded with a staircase-shaped slit and a pair of concentric slits, arranged like a complementary split-ring resonator. The antenna resonates from 1.2 to 43 GHz, exhibiting a bandwidth ratio of 36:1. In the MIMO antenna, the antenna elements are located orthogonally, and the isolation &gt; 18 dB and envelope correlation coefficient &lt; 0.01 are realized in the resonating band. The antenna offers a peak gain of 4 dBi, and a sharp reduction in gain at notch frequencies (3.5 GHz, 5.5 GHz, and 8.5 GHz) is achieved. The size of the MIMO antenna is 52 mm × 52 mm. The proposed compact-size antenna features a high bandwidth ratio and straightforward design procedure, and can be simply integrated into contemporary RF equipment. The presented SWB MIMO antenna outperforms SWB antenna designs reported in the open literature, which featured one or two notched bands, whereas it has three notched bands. Also, the three notches in the SWB are achieved without the use of any filters, which simplifies the antenna development process.

Reconfigurable graphene-based multi-input multi-output antenna design for THz applications

This paper presents a compact graphene-based multi-input multi-output (MIMO) antenna for wireless communications operating in frequency band (0.1-10) THz. This work has been performed with four ports microstrip antennas based on 37×88 μm² a silicon dioxide (Sio₂) substrate and copper on the ground layer, with high isolation by a series of unit cells of graphene selected between adjacent patches to reduce the transmission coefficient and antenna size. Graphene's chemical potential will change by changing the connected DC voltage, leading to bandwidth and resonant frequency variation. The simulation has a reflection coefficient is less than -10 dB at (4.5-10) THz of the frequency scale, mutual coupling (-15 dB), and the gain from (4.7-9) THz is (1.6-6.7254) dB. This paper aims to provide wideband, efficient and reconfigurable with simple graphene-based MIMO antenna for THz applications.

Reconfigurable graphene-based multi-input multi-output antenna design for THz applications

This paper presents a compact graphene-based multi-input multi-output (MIMO) antenna for wireless communications operating in frequency band (0.1-10) THz. This work has been performed with four ports microstrip antennas based on 37×88 μm² a silicon dioxide (Sio₂) substrate and copper on the ground layer, with high isolation by a series of unit cells of graphene selected between adjacent patches to reduce the transmission coefficient and antenna size. Graphene's chemical potential will change by changing the connected DC voltage, leading to bandwidth and resonant frequency variation. The simulation has a reflection coefficient is less than -10 dB at (4.5-10) THz of the frequency scale, mutual coupling (-15 dB), and the gain from (4.7-9) THz is (1.6-6.7254) dB. This paper aims to provide wideband, efficient and reconfigurable with simple graphene-based MIMO antenna for THz applications.

A miniaturized CPW-fed CSRR-loaded quad-port MIMO antenna for 5.5/6.5 GHz wireless applications

Abstract For forthcoming wireless applications, a small and highly decoupled complementary split ring resonators (CSRR)–loaded co-planar waveguide (CPW)–fed antenna for dual-band applications is investigated. The low-profile antenna consists of a CSRR-loaded rectangular radiating element with a truncated bottom, giving a wideband performance over the frequency ranges of 5.28–5.52 GHz and 6–7.2 GHz. The antenna has been printed on a widely used FR4 substrate measuring 7.5 × 10.5 × 1.6 mm3 in volume. This research’s suggested antenna is turned into a 4 × 4 multi input multi output (MIMO) construction using a 25 × 25 mm2 printed circuit board. Individual antennas were isolated by nearly 20 dB without using a decoupling device. The antenna has been built, and the measured and simulated results correspond well. Computing envelope correlation coefficient (ECC), channel capacity (CC), and channel capacity loss (CCL) further validates the antenna’s performance (−). The antenna has an overall gain of around 2.54 dBi and a radiation efficiency of approximately 89% throughout the relevant spectral range, which is much better for wireless applications. The suggested antenna’s omnidirectional emission pattern makes it a potential contender for future wireless and cellular applications.

Defected ground structure-based wideband circularly polarized 4-port MIMO antenna for future Wi-Fi 6E applications

A circularly-polarized (CP) wideband 4-port Multi-input multi-output (MIMO) antenna is proposed. The novel contribution of the proposed work lies in achieving CP through an L-shaped feedline and a carefully engineered orthogonally placed slotted ground plane geometry leading to a defected ground structure (DGS). A single-fed CP antenna structure is then converted to the 4-port MIMO antenna that achieves higher isolation due to polarization diversity. The MIMO antenna demonstrated an impedance bandwidth (IBW) spanning 65.01 % (from 3.81 GHz to 7.48 GHz), along with an axial ratio bandwidth (ARBW) of 20.10 % (from 5.47 GHz to 6.70 GHz). The 4-port CP MIMO antenna shows decent MIMO diversity performance. The measured results of the fabricated structure displayed good agreement with the simulated results. Antenna having both MIMO capability and circular polarization helps in reducing the multipath fading effect while increasing the latency. Thus, the proposed antenna having a wide overlapping Axial Ratio (AR) and Impedance Bandwidth (IBW) can be a very good choice for future devices using the Wireless Fidelity (Wi-Fi) 6E band.