Multiconfiguration Time-dependent Hartree Calculations Research Articles

Using a pruned basis and a sparse collocation grid with more points than basis functions to do efficient and accurate MCTDH calculations with general potential energy surfaces.

We propose a new collocation multi-configuration time-dependent Hartree (MCTDH) method. It reduces point-set error by using more points than basis functions. Collocation makes it possible to use MCTDH with a general potential energy surface without computing any integrals. The collocation points are associated with a basis larger than the basis used to represent wavefunctions. Both bases are obtained from a direct product basis built from single-particle functions by imposing a pruning condition. The collocation points are those on a sparse grid. Heretofore, collocation MCTDH calculations with more points than basis functions have only been possible if both the collocation grid and the basis set are direct products. In this paper, we exploit a new pseudo-inverse to use both more points than basis functions and a pruned basis and grid. We demonstrate that, for a calculation of the lowest 50 vibrational states (energy levels and wavefunctions) of CH2NH, errors can be reduced by two orders of magnitude by increasing the number of points, without increasing the basis size. This is true also when unrefined time-independent points are used.

Time dependent vibrational electronic coupled cluster (VECC) theory for non-adiabatic nuclear dynamics.

A time-dependent vibrational electronic coupled-cluster (VECC) approach is proposed to simulate photo-electron/UV-VIS absorption spectra as well as time-dependent properties for non-adiabatic vibronic models, going beyond the Born-Oppenheimer approximation. A detailed derivation of the equations of motion and a motivation for the ansatz are presented. The VECC method employs second-quantized bosonic construction operators and a mixed linear and exponential ansatz to form a compact representation of the time-dependent wave-function. Importantly, the method does not require a basis set, has only a few user-defined inputs, and has a classical (polynomial) scaling with respect to the number of degrees of freedom (of the vibronic model), resulting in a favorable computational cost. In benchmark applications to small models and molecules, the VECC method provides accurate results compared to multi-configurational time-dependent Hartree calculations when predicting short-time dynamical properties (i.e., photo-electron/UV-VIS absorption spectra) for non-adiabatic vibronic models. To illustrate the capabilities, the VECC method is also successfully applied to a large vibronic model for hexahelicene with 14 electronic states and 63 normal modes, developed in the group by Aranda and Santoro [J. Chem. Theory Comput. 17, 1691, (2021)].

Quantum dynamics studies on reactive scattering of Cl with rotationally excited H[formula omitted

In this work, extensive multi-configurational time-dependent Hartree (MCTDH) calculations in conjugation with the neural-network (NN) fitted potential energy surface (Science, 347 (2015), 60) were launched to study dynamics of Cl reacting with rotationally excited H2. Due to its direct abstraction mechanism, Cl + H2→ HCl + H in the ground state has no clear reaction resonances, which is well reproduced Here. For the reaction of Cl with H2 in rotationally excited states, the reactive probabilities are enhanced due to a Polanyi-like rule for rotationally excited states. Such Polanyi-like rule can be interpreted through the similar way as for the cases of vibrationally excited states. Moreover, distinctive resonances peaks are investigated for these cases implying a model for generating a quasi-bound rotation state. Similar to the chemical bond softening model for the vibrationally excited cases, a probable model is proposed in this work.

A numerically exact correlation discrete variable representation for multi-configurational time-dependent Hartree calculations.

The correlation discrete variable representation (CDVR) enables (multilayer) multi-configurational time-dependent Hartree (MCTDH) calculations with general potentials. The CDVR employs a set of grids corresponding to single-particle functions to efficiently evaluate all potential matrix elements appearing in the MCTDH equations of motion. In standard CDVR approaches, the number of grid points employed is tied to the number of corresponding single-particle functions. This limits the accuracy of the quadrature, which can be achieved for a given single-particle function basis. In this work, an extended CDVR approach that facilitates a numerically exact quadrature of all potential matrix elements is introduced. The number of grid points employed can be increased independent of the number of corresponding single-particle function to achieve any desired quadrature accuracy. The properties of the new scheme are illustrated by numerical calculations studying the photodissociation of NOCl and the vibrational states of CH3. Fast convergence with respect to the number of additional quadrature points is observed: Employing a single additional point in each physical or logical coordinate already ensures negligible quadrature errors.

Dissipative tunneling rates through the incorporation of first-principles electronic friction in instanton rate theory. II. Benchmarks and applications.

In Paper I [Litman et al., J. Chem. Phys. (in press) (2022)], we presented the ring-polymer instanton with explicit friction (RPI-EF) method and showed how it can be connected to the ab initio electronic friction formalism. This framework allows for the calculation of tunneling reaction rates that incorporate the quantum nature of the nuclei and certain types of non-adiabatic effects (NAEs) present in metals. In this paper, we analyze the performance of RPI-EF on model potentials and apply it to realistic systems. For a 1D double-well model, we benchmark the method against numerically exact results obtained from multi-layer multi-configuration time-dependent Hartree calculations. We demonstrate that RPI-EF is accurate for medium and high friction strengths and less accurate for extremely low friction values. We also show quantitatively how the inclusion of NAEs lowers the crossover temperature into the deep tunneling regime, reduces the tunneling rates, and, in certain regimes, steers the quantum dynamics by modifying the tunneling pathways. As a showcase of the efficiency of this method, we present a study of hydrogen and deuterium hopping between neighboring interstitial sites in selected bulk metals. The results show that multidimensional vibrational coupling and nuclear quantum effects have a larger impact than NAEs on the tunneling rates of diffusion in metals. Together with Paper I [Litman et al., J. Chem. Phys. (in press) (2022)], these results advance the calculations of dissipative tunneling rates from first principles.

A non-hierarchical correlation discrete variable representation.

The correlation discrete variable representation (CDVR) facilitates (multi-layer) multi-configurational time-dependent Hartree (MCTDH) calculations with general potentials. It employs a layered grid representation to efficiently evaluate all potential matrix elements appearing in the MCTDH equations of motion. The original CDVR approach and its multi-layer extension show a hierarchical structure: the size of the grids employed at the different layers increases when moving from an upper layer to a lower one. In this work, a non-hierarchical CDVR approach, which uses identically structured quadratures at all layers of the MCTDH wavefunction representation, is introduced. The non-hierarchical CDVR approach crucially reduces the number of grid points required, compared to the hierarchical CDVR, shows superior scaling properties, and yields identical results for all three representations showing the same topology. Numerical tests studying the photodissociation of NOCl and the vibrational states of CH3 demonstrate the accuracy of the non-hierarchical CDVR approach.

Surface Hopping Dynamics on Vibronic Coupling Models.

ConspectusThe simulation of photoinduced non-adiabatic dynamics is of great relevance in many scientific disciplines, ranging from physics and materials science to chemistry and biology. Upon light irradiation, different relaxation processes take place in which electronic and nuclear motion are intimately coupled. These are best described by the time-dependent molecular Schrödinger equation, but its solution poses fundamental practical challenges to contemporary theoretical chemistry. Two widely used and complementary approaches to this problem are multiconfigurational time-dependent Hartree (MCTDH) and trajectory surface hopping (SH). MCTDH is an accurate fully quantum-mechanical technique but often is feasible only in reduced dimensionality, in combination with approximate vibronic coupling (VC) Hamiltonians, or both (i.e., reduced-dimensional VC potentials). In contrast, SH is a quantum–classical technique that neglects most nuclear quantum effects but allows nuclear dynamics in full dimensionality by calculating potential energy surfaces on the fly. If nuclear quantum effects do not play a central role and a linear VC (LVC) Hamiltonian is appropriate—e.g., for stiff molecules that generally keep their conformation in the excited state—then it seems advantageous to combine the efficient LVC and SH techniques. In this Account, we describe how surface hopping based on an LVC Hamiltonian (SH/LVC)—as recently implemented in the SHARC surface hopping package—can provide an economical and automated approach to simulate non-adiabatic dynamics. First, we illustrate the potential of SH/LVC in a number of showcases, including intersystem crossing in SO2, intra-Rydberg dynamics in acetone, and several photophysical studies on large transition-metal complexes, which would be much more demanding or impossible to perform with other methods. While all of the applications provide very useful insights into light-induced phenomena, they also hint at difficulties faced by the SH/LVC methodology that need to be addressed in the future. Second, we contend that the SH/LVC approach can be useful to benchmark SH itself. By the use of the same (LVC) potentials as MCTDH calculations have employed for decades and by relying on the efficiency of SH/LVC, it is possible to directly compare multiple SH test calculations with a MCTDH reference and ponder the accuracy of various correction algorithms behind the SH methodology, such as decoherence corrections or momentum rescaling schemes. Third, we demonstrate how the efficiency of SH/LVC can also be exploited to identify essential nuclear and electronic degrees of freedom to be employed in more accurate MCTDH calculations. Lastly, we show that SH/LVC is able to advance the development of SH protocols that can describe nuclear dynamics including explicit laser fields—a very challenging endeavor for trajectory-based schemes. To end, this Account compiles the typical costs of contemporary SH simulations, evidencing the great advantages of using parametrized potentials. The LVC model is a sleeping beauty that, kissed by SH, is fueling the field of excited-state molecular dynamics. We hope that this Account will stimulate future research in this direction, leveraging the advantages of the SH/VC schemes to larger extents and extending their applicability to uncharted territories.

Direct product-type grid representations for angular coordinates in extended space and their application in the MCTDH approach.

Multi-configurational time-dependent Hartree (MCTDH) calculations using time-dependent grid representations can be used to accurately simulate high-dimensional quantum dynamics on general ab initio potential energy surfaces. Employing the correlation discrete variable representation, sets of direct product type grids are employed in the calculation of the required potential energy matrix elements. This direct product structure can be a problem if the coordinate system includes polar and azimuthal angles that result in singularities in the kinetic energy operator. In the present work, a new direct product-type discrete variable representation (DVR) for arbitrary sets of polar and azimuthal angles is introduced. It employs an extended coordinate space where the range of the polar angles is taken to be [-π, π]. The resulting extended space DVR resolves problems caused by the singularities in the kinetic energy operator without generating a very large spectral width. MCTDH calculations studying the F·CH4 complex are used to investigate important properties of the new scheme. The scheme is found to allow for more efficient integration of the equations of motion compared to the previously employed cot-DVR approach [G. Schiffel and U. Manthe, Chem. Phys. 374, 118 (2010)] and decreases the required central processing unit times by about an order of magnitude.

First-Principles Quantum and Quantum-Classical Simulations of Exciton Diffusion in Semiconducting Polymer Chains at Finite Temperature.

We report on first-principles quantum-dynamical and quantum-classical simulations of photoinduced exciton dynamics in oligothiophene chain segments, representative of intrachain exciton migration in the poly(3-hexylthiophene) (P3HT) polymer. Following up on our recent study (Binder R.; Burghardt, I. Faraday Discuss. 2020, 221, 406), multilayer multiconfiguration time-dependent Hartree calculations for a short oligothiophene segment comprising 20 monomer units (OT-20) are carried out to obtain full quantum-dynamical simulations at finite temperature. These are employed to benchmark mean-field Ehrenfest calculations, which are shown to give qualitatively correct results for the present system. Periodic boundary conditions turn out to significantly improve earlier estimates of diffusion coefficients. Using the Ehrenfest approach, a series of calculations are subsequently carried out for larger lattices (OT-40 to OT-80), leading to estimates for temperature-dependent mean-squared displacements, which are found to exhibit a near-linear dependence as a function of time. The resulting diffusion coefficient estimates are an increasing function of temperature, whose detailed functional form depends on the degree of static disorder. With a realistic static disorder parameter (σs ≃ 0.06 eV), the diffusion coefficients decrease from D ∼ 1 × 10-2 cm2 s-1 to D ∼ 1 × 10-3 cm2 s-1, in qualitative agreement with experimental data for P3HT. The dynamical scenario obtained from our simulations shows that exciton migration in P3HT-type chains is a largely adiabatic process throughout the temperature regime we investigated (i.e., T = 50-300 K). The resulting picture of exciton migration is a coherent, but not bandlike, motion of an exciton-polaron driven by fluctuations induced by low-frequency modes. This process acquires partial hopping character if static disorder becomes prominent and Anderson localization sets in.

State-to-state inelastic rotational cross sections in five-atom systems with the multiconfiguration time dependent Hartree method.

We present a MultiConfiguration Time Dependent Hartree (MCTDH) method as an attractive alternative approach to the usual quantum close-coupling method that approaches some computational limits in the calculation of rotational excitation (and de-excitation) between polyatomic molecules (here collisions between triatomic and diatomic rigid molecules). We have performed a computational investigation of the rotational (de-)excitation of the benchmark rigid rotor H2O-H2 system on a recently developed Potential Energy Surface of the complex using the MCTDH method. We focus here on excitations and de-excitations from the 000, 111, and 110 states of H2O with H2 in its ground rotational state, looking at all the potential transitions in the energy range 1-200 cm-1. This work follows a recently completed study on the H2O-H2 cluster where we characterized its spectroscopy and more generally serves a broader goal to describe inelastic collision processes of high dimensional systems using the MCTDH method. We find that the cross sections obtained from the MCTDH calculations are in excellent agreement with time independent calculations from previous studies but does become challenging for the lower kinetic energy range of the de-excitation process: that is, below approximately 20 cm-1 of collision energy, calculations with a relative modest basis become unreliable. The MCTDH method therefore appears to be a useful complement to standard approaches to study inelastic collision for various collision partners, even at low energy, though performing better for rotational excitation than for de-excitation.

Reduced rovibrational coupling Cartesian dynamics for semiclassical calculations: Application to the spectrum of the Zundel cation.

We study the vibrational spectrum of the protonated water dimer, by means of a divide-and-conquer semiclassical initial value representation of the quantum propagator, as a first step in the study of larger protonated water clusters. We use the potential energy surface from the work of Huang et al. [J. Chem. Phys. 122, 044308 (2005)]. To tackle such an anharmonic and floppy molecule, we employ fully Cartesian dynamics and carefully reduce the coupling to global rotations in the definition of normal modes. We apply the time-averaging filter and obtain clean power spectra relative to suitable reference states that highlight the spectral peaks corresponding to the fundamental excitations of the system. Our trajectory-based approach allows for the physical interpretation of the very challenging proton transfer modes. We find that it is important, for such a floppy molecule, to selectively avoid initially exciting lower energy modes, in order to obtain cleaner spectra. The estimated vibrational energies display a mean absolute error (MAE) of ∼29 cm-1 with respect to available multiconfiguration time-dependent Hartree calculations and MAE ∼ 14 cm-1 when compared to the optically active experimental excitations of the Ne-tagged Zundel cation. The reasonable scaling in the number of trajectories for Monte Carlo convergence is promising for applications to higher dimensional protonated cluster systems.

Quantum effects on the stability of the He5 I2 van der Waals conformers.

We present 15-dimensional quantum multiconfiguration time-dependent Hartree calculations of the vibrational levels of the He5 I2 van der Waals (vdW) complex employing an ab initio-based potential energy surface (PES). The energies and spatial features of such bound structures are analyzed, providing predictions on the structures and relative stabilities of its three lowest isomers. We found that the most stable isomer corresponds to all five He atoms encircling the I2 molecule, indicating that in this case the anharmonic quantum effects do not stabilize the isomers involving a He atom in a linear configuration as reported previously for the smaller HeN I2 systems. Such finding provides information on the overall structuring of the finite-size-solvent systems, highlighting the intriguing interplay between weak intermolecular interactions and quantum effects. © 2019 Wiley Periodicals, Inc.

Counter-propagating wave packets in the quantum transition state approach to reactive scattering.

The quantum transition state concept provides an intuitive and numerically efficient framework for the description of quantum state-resolved reactive scattering and thermal reaction processes. Combining multiconfigurational time-dependent Hartree wave packet dynamics calculations with a flux correlation function based analysis, rigorous full-dimensional calculations of initial state-selected and state-to-state reaction probabilities for six atom reactions are feasible. In these calculations, a set of wave packets is generated in the transition state region, propagated into the asymptotic area, and analyzed. In the present work, an alternative approach which employs counter-propagating sets of wave packets is introduced. Outgoing wave packets started in the transition state region are matched with incoming wave packets generated in the reactant (or product) asymptotic area. Studying the H + CH4 → H2 + CH3 reaction as a prototypical example, one finds that the incoming wave packets can be propagated closely up to the transition state region with minor numerical effort. Employing cross correlation functions of incoming and outgoing wavefunctions, the propagation times required for the outgoing wave packet and thus the numerical costs of the entire calculation can be reduced significantly. Detailed full-dimensional calculations studying initial state-selected reaction probabilities for the H + CH4 → H2 + CH3 reaction are presented to illustrate the new approach. It is found that converged results can be obtained using shorter propagation times of the outgoing wave packets and less single-particle functions.

A pruned collocation-based multiconfiguration time-dependent Hartree approach using a Smolyak grid for solving the Schrödinger equation with a general potential energy surface.

Standard multiconfiguration time-dependent Hartree (MCTDH) calculations use a direct product basis and rely on the potential being a sum of products (SOPs). The size of the direct product MCTDH basis scales exponentially with the number of atoms. Accurate potentials may not be SOPs. We introduce an MCTDH approach that uses a pruned basis and a collocation grid. Pruning the basis significantly reduces its size. Collocation makes it possible to do calculations using a potential that is not a SOP. The collocation point set is a Smolyak grid. Strategies using pruned MCTDH bases already exist, but they work only if the potential is a SOP. Strategies for using MCTDH with collocation also exist, but they work only if the MCTDH basis is a direct product. In this paper, we combine a pruned basis with collocation. This makes it possible to mitigate the direct-product basis size problem and do calculations when the potential is not a SOP. Because collocation is used, there are no integrals and no need for quadrature. All required matrix-vector products can be evaluated sequentially. We use nested sets of collocation points and hierarchical basis functions. They permit efficient inversion of the (large) matrix whose elements are basis functions evaluated at points, which is necessary to transform values of functions at points to basis coefficients. The inversion technique could be used outside of chemical physics. We confirm the validity of this new pruned, collocation-based (PC-)MCTDH approach by calculating the first 50 vibrational eigenenergies of CH2NH.

Coordinate systems and kinetic energy operators for multi-configurational time-dependent Hartree calculations studying reactions of methane

Accurate full-dimensional quantum state-resolved calculations studying reactions of methane currently rely on the multi-configurational time-dependent Hartree (MCTDH) approach and curvilinear coordinate systems. The coordinate systems used in MCTDH simulations of the reactive scattering of methane were based on a coordinate system and kinetic energy operator introduced by Evenhuis et al. (2007). In this coordinate system, the body-fixed frame is tied to the methyl fragment. Here it is shown that a revised definition of the methyl-fixed frame can reduce the correlation between the rotation of the methyl fragment and its internal motion. Furthermore, a new coordinate system which defines the body-fixed frame using the Jacobi vector associated with the dissociating bond and the symmetry axis of the methyl fragment is introduced. This coordinate system is designed for MCTDH simulations of the dissociative chemisorption of methane on surfaces.

MCTDH study on the reactive scattering of the Cl + HD reaction based on the neural-networks potential energy surface

To study the dynamics resonances of the Cl + HD reaction which was proposed to proceed via abstraction mechanism with no clear resonances, we perform dynamics calculations by the multiconfiguration time-dependent Hartree (MCTDH) method based on recently developed neural-networks potential energy surface (Science347 (2015), 60). The HD molecule in v=0 (GS), v=1 (EX1), v=2 (EX2), and v=3 (EX3) states is used for the reactant. For GS, no distinctive resonance peak is found, while for EX1 two distinctive peaks at kinetics energies of 0.11 and 0.17 eV are investigated. These resonance peaks are well consistent with the previous results (Science347 (2015), 60). Moreover, the present MCTDH calculations predict well-marked resonance peaks at 0.04,0.05,0.07, and 0.10 eV for EX2 and EX3, which indicates that anticipation of the chemical bond softening model (Science327 (2010), 1501) is confirmed in this work.

Few-femtosecond passage of conical intersections in the benzene cation

Observing the crucial first few femtoseconds of photochemical reactions requires tools typically not available in the femtochemistry toolkit. Such dynamics are now within reach with the instruments provided by attosecond science. Here, we apply experimental and theoretical methods to assess the ultrafast nonadiabatic vibronic processes in a prototypical complex system—the excited benzene cation. We use few-femtosecond duration extreme ultraviolet and visible/near-infrared laser pulses to prepare and probe excited cationic states and observe two relaxation timescales of 11 ± 3 fs and 110 ± 20 fs. These are interpreted in terms of population transfer via two sequential conical intersections. The experimental results are quantitatively compared with state-of-the-art multi-configuration time-dependent Hartree calculations showing convincing agreement in the timescales. By characterising one of the fastest internal conversion processes studied to date, we enter an extreme regime of ultrafast molecular dynamics, paving the way to tracking and controlling purely electronic dynamics in complex molecules.

Lattice effects of surface cell: Multilayer multiconfiguration time-dependent Hartree study on surface scattering of CO/Cu(100)

To study the scattering of CO off a movable Cu(100) surface, extensive multilayer multiconfiguration time-dependent Hartree (ML-MCTDH) calculations are performed based on the SAP [R. Marquardt et al., J. Chem. Phys. 132, 074108 (2010)] potential energy surface in conjunction with a recently developed expansion model [Q. Meng and H.-D. Meyer, J. Chem. Phys. 143, 164310 (2015)] for including lattice motion. The surface vibration potential is constructed by a sum of Morse potentials where the parameters are determined by simulating the vibrational energies of a clean Cu(100) surface. Having constructed the total Hamiltonian, extensive dynamical calculations in both time-independent and time-dependent schemes are performed. Two-layer MCTDH (i.e., normal MCTDH) block-improved-relaxations (time-independent scheme) show that increasing the number of included surface vibrational dimensions lets the vibrational energies of CO/Cu(100) decrease for the frustrated translation (T mode), which is of low energy but increase those of the frustrated rotation (R mode) and the CO–Cu stretch (S mode), whose vibrational energies are larger than the energies of the in-plane surface vibrations (∼79 cm−1). This energy-shifting behavior was predicted and discussed by a simple model in our previous publication [Q. Meng and H.-D. Meyer, J. Chem. Phys. 143, 164310 (2015)]. By the flux analysis of the MCTDH/ML-MCTDH propagated wave packets, we calculated the sticking probabilities for the X + 0D, X + 1D, X + 3D, X + 5D, and X + 15D systems, where “X” stands for the used dimensionality of the CO/rigid-surface system and the second entry denotes the number of surface degrees of freedom included. From these sticking probabilities, the X + 5D/15D calculations predict a slower decrease of sticking with increasing energy as compared to the sticking of the X + 0D/1D/3D calculations. This is because the translational energy of CO is more easily transferred to surface vibrations, when the vibrational dimensionality of the surface is enlarged.

Temperature Dependence of HeBr2 Isomers' Stability through Rovibrational Multiconfiguration Time-Dependent Hartree Calculations.

The multiconfiguration time-dependent Hartree (MCTDH) method using a six-dimensional Hamiltonian that includes all rotational and vibrational degrees of freedom and an ab initio potential energy surface was employed to calculate the rovibronic states of the HeBr2 van der Waals complex. All rotational states of energies within 7 cm -1 with respect to the energy of the linear ground state were calculated without restriction of the total angular momentum. In total, we obtained 500 and 320 rotationally excited states of the ground vibrational T-shaped and linear isomers of the HeBr2, respectively, and compared them with those predicted by the rigid rotor model. A thermodynamic model was then introduced to determine the relative stability of the two conformers as a function of the temperature. On the basis of the present results, the linear conformers were found to be energetically more stable than the T-shaped ones by 1.14 cm-1 at T = 0 K, whereas conversion from linear to T-shaped complexes was observed at temperatures above 2.87 K.

Using a pruned, nondirect product basis in conjunction with the multi-configuration time-dependent Hartree (MCTDH) method.

In this paper, we propose a pruned, nondirect product multi-configuration time dependent Hartree (MCTDH) method for solving the Schrödinger equation. MCTDH uses optimized 1D basis functions, called single particle functions, but the size of the standard direct product MCTDH basis scales exponentially with D, the number of coordinates. We compare the pruned approach to standard MCTDH calculations for basis sizes small enough that the latter are possible and demonstrate that pruning the basis reduces the CPU cost of computing vibrational energy levels of acetonitrile (D = 12) by more than two orders of magnitude. Using the pruned method, it is possible to do calculations with larger bases, for which the cost of standard MCTDH calculations is prohibitive. Pruning the basis complicates the evaluation of matrix-vector products. In this paper, they are done term by term for a sum-of-products Hamiltonian. When no attempt is made to exploit the fact that matrices representing some of the factors of a term are identity matrices, one needs only to carefully constrain indices. In this paper, we develop new ideas that make it possible to further reduce the CPU time by exploiting identity matrices.