Ms Time Scale Research Articles

A pressure-jump EPR system to monitor millisecond conformational exchange rates of spin-labeled proteins.

Site-directed spin labeling electron paramagnetic resonance (SDSL-EPR) using nitroxide spin labels is a well-established technology for mapping site-specific secondary and tertiary structure and for monitoring conformational changes in proteins of any degree of complexity, including membrane proteins, with high sensitivity. SDSL-EPR also provides information on protein dynamics in the timescale of ps-μs using continuous wave lineshape analysis and spin lattice relaxation time methods. However, the functionally important time domain of μs-ms, corresponding to large-scale protein motions, is inaccessible to those methods. To extend SDSL-EPR to the longer time domain, the perturbation method of pressure-jump relaxation is implemented. Here, we describe a complete high-pressure EPR system at Q-band for both static pressure and ms-timescale pressure-jump measurements on spin-labeled proteins. The instrument enables pressure jumps both up and down from any holding pressure, ranging from atmospheric pressure to the maximum pressure capacity of the system components (~3500 bar). To demonstrate the utility of the system, we characterize a local folding-unfolding equilibrium of T4 lysozyme. The results illustrate the ability of the system to measure thermodynamic and kinetic parameters of protein conformational exchange on the ms timescale.

Boosting Enzyme Activity in an Anhydrous Gas Flux with Amphiphilic Polymers

AbstractGas‐phase enzymatic catalysis offers great potential for both green synthesis and the efficient degradation of volatile chemicals. However, solid enzymes often exhibit extremely low activity compared to their counterparts in native aqueous phase. Although a few immobilization methods have succeeded in increasing activity by preserving enzyme structure, approaches for boosting enzyme activity remain underdeveloped. In this study, we propose a general and facile method to boost enzyme activity in the gas phase, which utilizes amphiphilic polymers to energize enzyme conformational dynamics and thus enhance enzyme catalysis kinetics. The triblock copolymer Pluronics with low melting points were co‐lyophilized with Candida antarctica lipase B (CalB), yielding Pluronic/CalB powders that appeared a 70‐fold increase in activity compared to free CalB powder. Low‐field nuclear magnetic resonance (LF‐NMR), solid‐state nuclear magnetic resonance (ssNMR) and dielectric relaxation spectroscopy identified the enhancement of enzyme dynamics on the µs–ms timescale, whereas Fourier transform infrared spectroscopy (FTIR) detected structural perturbations of the native enzyme in Pluronic/CalB. The apparent activity of the enzyme/polymer powders correlated positively with both enzyme dynamics and polymer flexibility. These findings provide new molecular physical insights into gas‐phase enzyme catalysis, which are essential for advancing enzyme applications in nonnatural scenario.

Allostery at a Protein-Protein Interface Harboring an Intermolecular Motional Network.

Motional properties of proteins govern recognition, catalysis, and regulation. The dynamics of tightly interacting residues can form intramolecular dynamic networks, dependencies fine-tuned by evolution to optimize a plethora of functional aspects. The constructive interaction of residues from different proteins to assemble intermolecular dynamic networks is a similarly likely case but has escaped thorough experimental assessment due to interfering association/dissociation dynamics. Here, we use fast-MAS solid-state 15N R1ρ NMR relaxation dispersion aided by molecular-dynamics simulations to mechanistically assess the hierarchy of individual μs timescale motions arising from a crystal-crystal contact, in the absence of translational motion. In contrast to the monomer, where particular mutations entail isolated perturbations, specific intermolecular interactions couple the motional properties between distant residues in the same protein. The mechanistic insights obtained from this conceptual work may improve our understanding on how intramolecular allostery can be tuned by intermolecular interactions via assembly of dynamic networks from previously isolated elements.

Competing Nonadiabatic Relaxation Pathways for Near-UV Excited ortho-Nitrophenol in Aqueous Solution.

Nitrophenols are atmospheric pollutants found in brown carbon aerosols produced by biomass burning. Absorption of solar radiation by these nitrophenols contributes to atmospheric radiative forcing, but quantifying this climate impact requires better understanding of their photochemical pathways. Here, the photochemistry of near-UV (λ = 350 nm) excited ortho-nitrophenol in aqueous solution is investigated using transient absorption spectroscopy and time-resolved infrared spectroscopy over the fs to μs time scale to characterize the excited states, intermediates, and photoproducts. Interpretation of the transient spectroscopy data is supported by quantum chemical calculations using linear-response time-dependent density functional theory (LR-TDDFT). Our results indicate efficient nonradiative decay via an S1(ππ*)/S0 conical intersection leading to hot ground state ortho-nitrophenol which vibrationally cools in solution. A previously unreported minor pathway involves intersystem crossing near an S1(nπ*) minimum, with decay of the resulting triplet ortho-nitrophenol facilitated by deprotonation. These efficient relaxation pathways account for the low quantum yields of photodegradation.

Hybrid integrated GaSb/Si3N4 narrow linewidth (<50 kHz) distributed Bragg reflector laser

A narrow linewidth hybrid integrated distributed Bragg reflector (DBR) laser platform operating at 2 μm wavelength region is demonstrated. The laser architecture comprises AlGaInAsSb/GaSb type-I quantum well reflective semiconductor optical amplifiers butt-coupled to a Si3N4 photonic integrated circuit (PIC), incorporating a narrow-band DBR. The DBR is realized with a long spiral-shaped waveguide structure with periodic circular posts placed adjacent to the waveguide. At room temperature operating conditions, the laser exhibits a maximum continuous wave output power of more than 17 mW for emission near 2 μm. Linewidth properties are analyzed with a heterodyne measurement technique, involving the mixing of the laser signal with a frequency comb phase-locked to an ultra-stable laser. The hybrid laser exhibits a narrow linewidth of ∼8 kHz in 1 ms timescale and ∼50 kHz in 10 ms timescale.

Gold-Thiolate Nanocluster Dynamics and Intercluster Reactions Enabled by a Machine Learned Interatomic Potential.

Monolayer protected metal clusters comprise a rich class of molecular systems and are promising candidate materials for a variety of applications. While a growing number of protected nanoclusters have been synthesized and characterized in crystalline forms, their dynamical behavior in solution, including prenucleation cluster formation, is not well understood due to limitations both in characterization and first-principles modeling techniques. Recent advancements in machine-learned interatomic potentials are rapidly enabling the study of complex interactions such as dynamical behavior and reactivity on the nanoscale. Here, we develop an Au-S-C-H atomic cluster expansion (ACE) interatomic potential for efficient and accurate molecular dynamics simulations of thiolate-protected gold nanoclusters (Aun(SCH3)m). Trained on more than 30,000 density functional theory calculations of gold nanoclusters, the interatomic potential exhibits ab initio level accuracy in energies and forces and replicates nanocluster dynamics including thermal vibration and chiral inversion. Long dynamics simulations (up to 0.1 μs time scale) reveal a mechanism explaining the thermal instability of neutral Au25(SR)18 clusters. Specifically, we observe multiple stages of isomerization of the Au25(SR)18 cluster, including a chiral isomer. Additionally, we simulate coalescence of two Au25(SR)18 clusters and observe series of clusters where the formation mechanisms are critically mediated by ligand exchange in the form of [Au-S]n rings.

Probing the energy landscape of the lipid interactions of the serotonin1A receptor

G protein-coupled receptors (GPCRs) are lipid-regulated transmembrane proteins that play a central role in cell signaling and pharmacology. Although the role of membrane lipids in GPCR function is well established, the underlying GPCR-lipid interactions have not been thermodynamically characterized due to the complexity of these interactions. In this work, we estimate the energetics and dynamics of lipid association from coarse-grain simulations of the serotonin1A receptor embedded in a complex membrane. We show that lipids bind to the receptor with varying energetics of 1–4 kT, and timescales of 1–10 μs. The most favorable energetics and longest residence times are observed for cholesterol, glycosphingolipid GM1, phosphatidylethanolamine (PE) and phosphatidylserine (PS) lipids. Multi-exponential fitting of the contact probability suggests distinct dynamic regimes, corresponding to ps, ns and μs timescales, that we correlate with the annular, intermediate and non-annular lipid sites. The timescales of lipid binding correspond to high barrier heights, despite their relatively weaker energetics. Our results highlight that GPCR-lipid interactions are driven by both thermodynamic interactions and the dynamical features of lipid binding.

Fast Photoactuation and Environmental Response of Humidity-Sensitive pDAP-Silicon Nanocantilevers.

Multi-responsive nanomembranes are a new class of advanced materials that can be harnessed in complex architectures for micro and nano-manipulators, artificial muscles, energy harvesting, soft robotics, and sensors. The design and fabrication of responsive membranes must meet such challenges as trade-offs between responsiveness and mechanical durability, volumetric low-cost production ensuring low environmental impact, and compatibility with standard technologies or biological systems This work demonstrates the fabrication of multi-responsive, mechanically robust poly(1,3-diaminopropane) (pDAP) nanomembranes and their application in fast photoactuators. The pDAP films are developed using a plasma-assisted polymerization technique that offers large-scale production and versatility of potential industrial relevance. The pDAP layers exhibit high elasticity with the Young's modulus of ≈7 GPa and remarkable mechanical durability across 20-80°C temperatures. Notably, pDAP membranes reveal immediate and reversible contraction triggered by light, rising temperature, or reducing relative humidity underpinned by a reversible water sorption mechanism. These features enable the fabrication of photoactuators composed of pDAP-coated Si nanocantilevers, demonstrating ms timescale response to light, tens of µm deflections, and robust performance up to kHz frequencies. These results advance fundamental research on multi-responsive nanomembranes and hold the potential to boost versatile applications in light-to-motion conversion and sensing toward the industrial level.

The Streptococcus phage protein paratox is an intrinsically disordered protein.

The bacteriophage protein paratox (Prx) blocks quorum sensing in its streptococcal host by directly binding the signal receptor and transcription factor ComR. This reduces the ability of Streptococcus to uptake environmental DNA and protects phage DNA from damage by recombination. Past work characterizing the Prx:ComR molecular interaction revealed that paratox adopts a well-ordered globular fold when bound to ComR. However, solution-state biophysical measurements suggested that Prx may be conformationally dynamic. To address this discrepancy, we investigated the stability and dynamic properties of Prx in solution using circular dichroism, nuclear magnetic resonance, and several fluorescence-based protein folding assays. Our work shows that under dilute buffer conditions Prx is intrinsically disordered. We also show that the addition of kosmotropic salts or protein stabilizing osmolytes induces Prx folding. However, the solute stabilized fold is different from the conformation Prx adopts when it is bound to ComR. Furthermore, we have characterized Prx folding thermodynamics and folding kinetics through steady-state fluorescence and stopped flow kinetic measurements. Our results show that Prx is a highly dynamic protein in dilute solution, folding and refolding within the 10 ms timescale. Overall, our results demonstrate that the streptococcal phage protein Prx is an intrinsically disordered protein in a two-state equilibrium with a solute-stabilized folded form. Furthermore, the solute-stabilized fold is likely the predominant form of Prx in a solute-crowded bacterial cell. Finally, our work suggests that Prx binds and inhibits ComR, and thus quorum sensing in Streptococcus, by a combination of conformational selection and induced-fit binding mechanisms.

Activated Singlet Fission Dictated by Anti-Kasha Property in a Rylene Imide Dye.

A key challenge in the search of new materials capable of singlet fission (SF) arises from the primary energy conservation criterion, i.e., the energy of the triplet exciton has to be half that of the singlet (E(S1) ≥ 2E(T1)), which excludes most photostable organic materials from consideration and confines the design strategy to materials with low energy triplet states. One potential way to overcome this energy requirement and improve the triplet energy is to enable a SF channel from higher energy ("hot") excitonic states (Sn) in a process called activated SF. Herein, we demonstrate that efficient activated SF is achieved in a rylene imide-based derivative acenaphth[l, 2-a]acenaphthylene diimide (AADI). This process is enabled by an increase in the energy gap to greater than 1.0 eV between the S3 and S1 states due to the incorporation of an antiaromatic pentalene unit, which leads to the emergence of anti-Kasha properties in the isolated molecule. Transient spectroscopy studies show that AADI undergoes ultrafast SF from higher singlet excited states in thin film, with excitation wavelength-dependent SF yields. The SF yield of ∼200% is observed upon higher energy excitation, and long-lived free triplets persist on the μs time scale suggesting that AADI can be used in SF-enhanced devices. Our results suggest that enlarging the Sn-S1 energy gap is an effective way to turn on the activated SF channel and shed light on the development of novel, stable SF materials with high triplet energies.

Antioxidative Triplet Excitation Energy Transfer in Bacterial Reaction Center Using a Screened Range Separated Hybrid Functional.

Excess energy absorbed by photosystems (PSs) can result in photoinduced oxidative damage. Transfer of such energy within the core pigments of the reaction center in the form of triplet excitation is important in regulating and preserving the functionality of PSs. In the bacterial reaction center (BRC), the special pair (P) is understood to act as the electron donor in a photoinduced charge transfer process, triggering the charge separation process through the photoactive branch A pigments that experience a higher polarizing environment. At this work, triplet excitation energy transfer (TEET) in BRC is studied using a computational perspective to gain insights into the roles of the dielectric environment and interpigment orientations. We find in agreement with experimental observations that TEET proceeds through branch B. The TEET process toward branch B pigment is found to be significantly faster than the hypothetical process proceeding through branch A pigments with ps and ms time scales, respectively. Our calculations find that conformational differences play a major role in this branch asymmetry in TEET, where the dielectric environment asymmetry plays only a secondary role in directing the TEET to proceed through branch B. We also address TEET processes asserting the role of carotenoid as the final triplet energy acceptor and in a mutant form, where the branch pigments adjacent to P are replaced by bacteriopheophytins. The necessary electronic excitation energies and electronic state couplings are calculated by the recently developed polarization-consistent framework combining a screened range-separated hybrid functional and a polarizable continuum mode. The polarization-consistent potential energy surfaces are used to parametrize the quantum mechanical approach, implementing Fermi's golden rule expression of the TEET rate calculations.

Revisiting Textbook Azide-Clock Reactions: A "Propeller-Crawling" Mechanism Explains Differences in Rates.

An ongoing challenge to chemists is the analysis of pathways and kinetics for chemical reactions in solution, including transient structures between the reactants and products that are difficult to resolve using laboratory experiments. Here, we enabled direct molecular dynamics simulations of a textbook series of chemical reactions on the hundreds of ns to μs time scale using the weighted ensemble (WE) path sampling strategy with hybrid quantum mechanical/molecular mechanical (QM/MM) models. We focused on azide-clock reactions involving addition of an azide anion to each of three long-lived trityl cations in an acetonitrile-water solvent mixture. Results reveal a two-step mechanism: (1) diffusional collision of reactants to form an ion-pair intermediate; (2) "activation" or rearrangement of the intermediate to the product. Our simulations yield not only reaction rates that are within error of experiment but also rates for individual steps, indicating the activation step as rate-limiting for all three cations. Further, the trend in reaction rates is due to dynamical effects, i.e., differing extents of the azide anion "crawling" along the cation's phenyl-ring "propellers" during the activation step. Our study demonstrates the power of analyzing pathways and kinetics to gain insights on reaction mechanisms, underscoring the value of including WE and other related path sampling strategies in the modern toolbox for chemists.

Kinetics of direct and water‐mediated tautomerization reactions of five‐membered cyclic amides or lactams

AbstractAs part of a series of studies of hydrogen‐atom transfer or tautomerization reactions of imidic acid–amide species, , we report the rate constants for a set of 24 five‐membered cyclic compounds at low, 50–300 K, and high, 500–1500 K, temperatures. These rate constants are for both the high temperature direct reaction and for that mediated by an additional water molecule which facilitates the hydrogen transfer reaction at low temperatures. In the latter case we show that the rate of reaction from a pre‐reaction complex can be rapid at temperatures down to 50 K on a 1 ms timescale and is dominated by quantum mechanical effects as evaluated by small‐curvature and quantised‐reaction‐states tunnelling. In addition, we present thermochemical data such as enthalpies of formation, entropies, isobaric heat capacities and enthalpy functions for these largely unknown species which span a range of compounds from pyrolidinone to oxo‐tetrazoles.

Phase transition kinetics revealed by in situ x-ray diffraction in laser-heated dynamic diamond anvil cells

We report successful coupling of dynamic loading in a diamond anvil cell and stable laser heating, which enables compression rates up to 500 GPa/s along high-temperature isotherms. Dynamic loading in a diamond-anvil cell allows exploration of a wider range of pathways in the pressure-temperature space compared to conventional dynamic compression techniques. By x-ray diffraction, we are able to characterize and monitor the structural transitions with the appropriate time resolution i.e., millisecond timescales. Using this method, we investigate the γ−ε phase transition of iron under dynamic compression, reaching compression rates of hundreds of GPa/s and temperatures of 2000 K. Our results demonstrate a distinct response of the γ−ε and α−ε transitions to the high compression rates achieved, possibly due to the different transition mechanisms. These findings open up new avenues to study tailored dynamic compression pathways in the pressure-temperature space and highlight the potential of this platform to capture kinetic effects (over ms time scales) in a diamond anvil cell. Published by the American Physical Society 2024

Limits on Optical Counterparts to the Repeating Fast Radio Burst 20180916B from High-speed Imaging with Gemini-North/‘Alopeke

We report on contemporaneous optical observations at ≈10 ms timescales from the fast radio burst (FRB) 20180916B of two repeat bursts (FRB 20201023 and FRB 20220908) taken with the ‘Alopeke camera on the Gemini-North telescope. These repeats have radio fluences of 2.8 and 3.5 Jy ms, respectively, approximately in the lower 50th percentile for fluence from this repeating burst. The ‘Alopeke data reveal no significant optical detections at the FRB position and we place 3σ upper limits to the optical fluences of <8.3 × 10−3 and <7.7 × 10−3 Jy ms after correcting for line-of-sight extinction. Together, these yield the most sensitive limits to the optical-to-radio fluence ratio of an FRB on these timescales with η ν < 3 × 10−3 by roughly an order of magnitude. These measurements rule out progenitor models where FRB 20180916B has a similar fluence ratio to optical pulsars, such as the Crab pulsar, or where optical emission is produced as inverse-Compton radiation in a pulsar magnetosphere or young supernova remnant. Our ongoing program with ‘Alopeke on Gemini-North will continue to monitor repeating FRBs, including FRB 20180916B, to search for optical counterparts on millisecond timescales.

Jumping droplets

AbstractWhen microdroplets with quasi‐spherical contact angles coalesce together on a low‐adhesion substrate, the capillary‐inertial expansion of the liquid bridge induces a dramatic out‐of‐plane jumping event due to symmetry breaking. From the onset of merging, droplet jumping initiates after a capillary‐inertial time scale of μs with characteristic jumping speeds of order m/s. This coalescence‐induced jumping‐droplet effect is most commonly observed among a population of growing dew droplets on a superhydrophobic condenser, but can also occur by colliding deposited droplets together or during droplet sliding on fog harvesters. In this review, we cover the historical development of capillary‐inertial jumping droplets, summarize the decade‐long effort to rationalize the ultra‐low energy conversion efficiency and critical droplet size of the phenomenon, and then present 15 variations on a theme of jumping. Capillary‐inertial jumping droplets are not only a visceral illustration of the surprising power of surface tension at the microscale but they also have the potential to enhance phase‐change heat transfer, enable self‐cleaning surfaces, combat frost formation, harvest energy, and govern the rate of disease spread for wheat crops.

Enhanced Photostability and Photoactivity of Ruthenium Polypyridyl-Based Photocatalysts by Covalently Anchoring Onto Reduced Graphene Oxide.

Recentstudies toward finding more efficient ruthenium metalloligands for photocatalysis applications have shown that the derivatives of the linear [Ru(dqp)2]2+ (dqp: 2,6-di(quinolin-8-yl)-pyridine) complexes hold significant promise due to their extended emission lifetime in the μs time scale while retaining comparable redox potential, extinction coefficients, and absorption profile in the visible region to [Ru(bpy)3]2+ (bpy: 2,2'-bipyridine) and [Ru(tpy)2]2+ (tpy: 2,2':6',2″-terpyridine) complexes. Nevertheless, its photostability in aqueous solution needs to be improved for its widespread use in photocatalysis. Carbon-based supports have arisen as potential solutions for improving photostability and photocatalytic activity, yet their effect greatly depends on the interaction of the metal complex with the support. Herein, we present a strategy for obtaining Ru-polypyridyl complexes covalently linked to aminated reduced graphene oxide (rGO) to generate novel materials with long-term photostability and increased photoactivity. Specifically, the hybrid Ru(dqp)@rGO system has shown excellent photostable behavior during 24 h of continual irradiation, with an enhancement of 10 and 15% of photocatalytic dye degradation in comparison with [Ru(dqp)2]2+ and Ru(tpy)@rGO, respectively, as well as remarkable recyclability. The presented strategy corroborates the potential of [Ru(dqp)2]2+ as an interesting photoactive molecule to produce more advantageous light-active materials by covalent attachment onto carbon-based supports.

Thermoelastic effects in Bragg reflectors as a potential bottleneck for XFELs with megahertz repetition rate

Bragg reflectors are essential for beam transport in X-ray free-electron laser (XFEL) facilities. On interaction with Bragg reflectors, a part of the pulse energy will be absorbed, causing the propagation of displacement waves due to rapid thermal expansion. It is suspected that these waves may cause stability problems for XFELs operating with megahertz repetition rates. Here, we experimentally investigate the displacement of a diamond Bragg reflector induced by an optical ultra-violet laser pulse, simulating XFEL pulses with mJ pulse energy, both at room temperature and cryogenic temperatures. Our experiment shows negligible damping of the displacement waves on µs timescales, which could cause disruption for subsequent XFEL pulses. We compare our measurements to a simulation framework based on the assumptions of local thermodynamic equilibrium and classical mechanics, observing reasonable agreement. Our results show that thermoelastic effects are critical for a reliable stability assessment of Bragg reflectors, but are often overlooked.

Multiple retinal isomerizations during the early phase of the bestrhodopsin photoreaction

Bestrhodopsins constitute a class of light-regulated pentameric ion channels that consist of one or two rhodopsins in tandem fused with bestrophin ion channel domains. Here, we report on the isomerization dynamics in the rhodopsin tandem domains of Phaeocystis antarctica bestrhodopsin, which binds all-trans retinal Schiff-base (RSB) absorbing at 661 nm and, upon illumination, converts to the meta-stable P540 state with an unusual 11-cis RSB. The primary photoproduct P682 corresponds to a mixture of highly distorted 11-cis and 13-cis RSB directly formed from the excited state in 1.4 ps. P673 evolves from P682 in 500 ps and contains highly distorted 13-cis RSB, indicating that the 11-cis fraction in P682 converts to 13-cis. Next, P673 establishes an equilibrium with P595 in 1.2 µs, during which RSB converts to 11-cis and then further proceeds to P560 in 48 µs and P540 in 1.0 ms while remaining 11-cis. Hence, extensive isomeric switching occurs on the early ground state potential energy surface (PES) on the hundreds of ps to µs timescale before finally settling on a metastable 11-cis photoproduct. We propose that P682 and P673 are trapped high up on the ground-state PES after passing through either of two closely located conical intersections that result in 11-cis and 13-cis RSB. Co-rotation of C11=C12 and C13=C14 bonds results in a constricted conformational landscape that allows thermal switching between 11-cis and 13-cis species of highly strained RSB chromophores. Protein relaxation may release RSB strain, allowing it to evolve to a stable 11-cis isomeric configuration in microseconds.

Probing time-resolved plasma-driven solution electrochemistry in a falling liquid film plasma reactor: Identification of HO2- as a plasma-derived reducing agent.

Many applications involving plasma-liquid interactions depend on the reactive processes occurring at the plasma-liquid interface. We report on a falling liquid film plasma reactor allowing for in situ optical absorption measurements of the time-dependence of the ferricyanide/ferrocyanide redox reactivity, complemented with ex situ measurement of the decomposition of formate. We found excellent agreement between the measured decomposition percentages and the diffusion-limited decomposition of formate by interfacial plasma-enabled reactions, except at high pH in thin liquid films, indicating the involvement of previously unexplored plasma-induced liquid phase chemistry enabled by long-lived reactive species. We also determined that high pH facilitates a reduction-favoring environment in ferricyanide/ferrocyanide redox solutions. In situ conversion measurements of a 1:1 ferricyanide/ferrocyanide redox mixture exceed the measured ex situ conversion and show that conversion of a 1:1 ferricyanide/ferrocyanide mixture is strongly dependent on film thickness. We identified three dominant processes: reduction faster than ms time scales for film thicknesses >100 µm, •OH-driven oxidation on time scales of <10ms, and reduction on 15ms time scales for film thickness <100 µm. We attribute the slow reduction and larger formate decomposition at high pH to HO2- formed from plasma-produced H2O2 enabled by the high pH at the plasma-liquid interface as confirmed experimentally and by computed reaction rates of HO2- with ferricyanide. Overall, this work demonstrates the utility of liquid film reactors in enabling the discovery of new plasma-interfacial chemistry and the utility of atmospheric plasmas for electrodeless electrochemistry.