Mound Core Research Articles

Depositional model of the Member Deng-2 marginal microbial mound-bank complex of the Dengying Formation in the southwestern Sichuan Basin, SW China: Implications for the Ediacaran microbial mound construction and hydrocarbon exploration

Recent advances in hydrocarbon exploration have been made in the Member Deng-2 marginal microbial mound-bank complex reservoirs of the Dengying Formation in the western Sichuan Basin, SW China, where the depositional process is regarded confusing. The microfacies, construction types, and depositional model of the Member Deng-2 marginal microbial mound-bank complex have been investigated using unmanned aerial vehicle photography, outcrop section investigation, thin section identification, and seismic reflections in the southwestern Sichuan Basin. The microbialite lithologic textures in this region include thrombolite, dendrolite, stromatolite, fenestral stromatolite, spongiostromata stone, oncolite, aggregated grainstone, and botryoidal grapestone. Based on the comprehensive analysis of “depositional fabrics–lithology–microfacies”, an association between a fore mound, mound framework, and back mound subfacies has been proposed based on water depth, current direction, energy level and lithologic assemblages. The microfacies of the mound base, mound core, mound flank, mound cap, and mound flat could be recognized among the mound framework subfacies. Two construction types of marginal microbial mound-bank complex have been determined based on deposition location, mound scale, migration direction, and sedimentary facies association. Type Jinkouhe microbial mound constructions (TJMMCs) develop along the windward margin owing to their proximity to the seaward subfacies fore mound, with a northeastwardly migrated microbial mound on top of the mud mound, exhibiting the characteristics of large-sized mounds and small-sized banks in the surrounding area. Type E’bian microbial mound constructions (TEMMCs) primarily occur on the leeward margin, resulting from the presence of onshore back mound subfacies, with the smaller southwestward migrated microbial mounds existing on a thicker microbial flat. The platform margin microbial mound depositional model can be correlated with certain lateral comparison profile and seismic reflection structures in the 2D seismic section, which can provide references for future worldwide exploration. Microbial mounds with larger buildups and thicker vertical reservoirs are typically targeted on the windward margin, while small-sized microbial mounds and flats with better lateral connections are typically focused on the leeward margin.

Palaeoceanographic and hydrodynamic variability for the last 47 kyr in the southern Gulf of Cádiz (Atlantic Moroccan margin): Sedimentary and climatic implications

AbstractX‐ray fluorescence, grain‐size and oxygen and carbon stable isotope measurements of a 33 m long piston core, recovered from the Pen Duick drift located at the foot of the prominent Pen Duick Escarpment (Atlantic Moroccan margin), are combined to decipher past oceanographic conditions. The data indicate that, similar to the northern Gulf of Cádiz, the Azores Front exerts a major control on the palaeoclimatology of the region. Contrasting the northern Gulf of Cádiz, where Mediterranean Outflow Water is the main water mass at similar water depths, the palaeoceanography of the studied area is mostly influenced by the amount of Antarctic Intermediate Water advected from the south. The density contrast between the Antarctic Intermediate Water and the overlying North Atlantic Central Water determined the strength of the prevailing internal tides and corresponding high current speeds, which drastically impacted the sedimentary record. The most notable impact is the presence of a 7.8 kyr condensed section (30.5–22.7 ka bp). The formation of the Pen Duick sediment drift was not just controlled by the strength of the bottom currents and the intensity of the internal tides, but also by the amount of (aeolian) sediment supplied to the region. Although variable, drift‐growth phases seem to mainly occur during colder periods of the last glacial, that is Heinrich and Dansgaard‐Oeschger events during Marine Isotope Stage 3 and late Marine Isotope Stage 2. These periods, characterised by increased aeolian dust supply and higher bottom currents, coincide with a phase of prolific cold‐water coral growth and enhanced coral mound formation as recorded in numerous cores obtained from the southern Gulf of Cádiz. This implies that both records (on and off mound cores) are pivotal to provide the complete picture of the palaeoclimatic and palaeoceanographic conditions in the region.

Bottom currents on a pelagic carbonate platform: Mounds and sediment drifts in the Jurassic succession of the Sciacca Plateau, Western Sicily

AbstractThe stratigraphic succession in the San Vincenzo Gorge (Saccense Domain, western Sicily) documents deposition on a vast pelagic carbonate platform, the Sciacca Plateau, during the Middle and Late Jurassic. This succession caps a peritidal limestone (Inici Formation), which underwent extension during the Western Tethyan Early Jurassic rift phase, and displays a set of unique features, which have never been previously reported on a Tethyan drowned platform. The upper part of the Bositra limestone (late Bajocian‐early Oxfordian p.p.) comprises elongate convex‐up, mound‐shaped bodies, made of thin‐shelled bivalve wacke‐ to grainstone, a few tens of metres across and producing a topographic relief of up to 10 m. Planar beds within the mound cores are seen to thin out laterally with tangential downlaps along sections perpendicular to the mounds' longer axes, and the mounds are in lateral association with concave‐up bedsets. Following halt of the Bositra‐dominated deposition and demise of mound accretion, the draping units inherited an antiformal geometry. The mounds are interpreted as being part of a sediment drift, produced by bottom currents sweeping the Plateau top, the source areas being sediment‐depleted sectors now documented by extremely condensed and hiatus‐ridden sections, with parallel‐sided beds. Following draping and partial levelling of the submarine relief by the Knobbly limestone (?middle Oxfordian/early Kimmeridgian‐late Kimmeridgian), the Coquina limestone is locally a thick (>20 m) ammonite/brachiopod rudstone (Tithonian p.p.). This unit displays evidence for lateral accretion, with large‐scale clinoforms dipping up to 12°, and is interpreted as a mud‐poor, bioclastic‐gravel drift, with the action of bottom currents being apparently linked with a bloom of cephalopods. This is an early‐cemented deposit, where clotted, micropeloidal fabrics document the calcification of microbial communities and are followed by growth of early diagenetic fibrous calcite. The description and interpretation of the mounded Bositra limestone and of the clinostratified Tithonian limestone are the main focus of this paper. The San Vincenzo Gorge outcrop displays similarities with pelagic shelves, like the Upper Chalk basin of northern Europe.

Types of the Cambrian platform margin mound-shoal complexes and their relationship with paleogeomorphology in Gucheng area, Tarim Basin, NW China

Based on the observation of outcrops and cores, thin section identification, restoration of paleogeomorphology by residual thickness method, fine description of seismic facies, etc., the coupling relationships between the development patterns of various types of Cambrian platform margin mound-shoal complexes and paleogeomorphology in the Gucheng area of Tarim Basin have been examined. The Cambrian platform margin mound-shoal complex is divided into mound base, mound core, mound front, mound back and mound flat microfacies, which are composed of dolomites of seven textures with facies indication. The different paleogeomorphology before the deposition of mound-shoal complex in each period was reconstructed, and three types of mound-shoal complex sedimentary models corresponding to the paleogeomorphologies of four stages were established: namely, the first stage of gentle slope symmetric accretion type, the second stage of steep slope asymmetric accretion type and the third and fourth stages of steep slope asymmetric progradation type. Their microfacies are respectively characterized by “mound base - mound back + (small) mound core + mound front - mound flat” symmetric vertical accretion structure, “mound base - (large) mound core + mound front - mound flat” asymmetric vertical accretion structure, “mound base - (small) mound core + mound front - mound flat” asymmetric lateral progradation structure. With most developed favorable reservoir facies belt, the steep slope asymmetric accretion type mound-shoal complex with the characteristics of “large mound and large shoal” is the exploration target for oil and gas reservoir.

Temperature control of cold-water coral (Lophelia) mound growth by climate-cycle forcing, Northeast Gulf of Mexico

Chronostratigraphy, of a northern Gulf of Mexico Lophelia pertusa (cold-water coral) mound (Roberts Reef), indicated that mound development included periods of growth and non-growth that are closely tied to Late Pleistocene climate cycles. U/Th and 14C dating of coral fragments in two ~ 16 m cores (mound crest and mound flank) and foraminiferal biostratigraphy provided a stratigraphic framework that identified five mound-growth sequences separated by four hiatuses, a total of ~ 300 ka. Mound growth occurred during interglacials while non-growth and unconformity formation correlates to glacial periods. In each cycle, growth on the mound flank persisted after growth at the crest ceased.Results of our study suggest warming bottom-water as the most probable environmental condition for limiting L. pertusa growth and mound accretion as sea level fell toward a glacial maximum. At highstands of sea level, the mound resided in the Oxygen Minimum Layer with a present temperature range of ~ 9.0–12.8 °C. During falling-to-lowstands of sea level, isotherms of warm, Subtropical Underwater (~ 12.8–21 °C) progressively exposed the mound to water above the thermal range for L. pertusa.A comparison of non-growth periods in the mound cores indicates that coral mortality and suppression of mound growth started at the crest and moved down the flank, a trend that supports progressive immersion of the mound in warm Subtropical Underwater. Multiday episodes of vertical down-mixing may have also transported warm ocean water, above the tolerance level of Lophelia, to the mound.Present average bottom-water temperatures at the mound crest range between 9 and 10.5 °C, ideal for L. pertusa growth in the Gulf of Mexico. Experimental work indicates that relatively short periods (weeks) of L. pertusa exposure to water of ~ 12–14 °C results in mortality. At periods of lowered sea level, the mound is projected to have been immersed in ocean water of ~ 12–14 °C for millennial scale time periods.

Elimination of Coptotermes lacteus (Froggatt) (Blattodea: Rhinotemitidae) Colonies Using Bistrifluron Bait Applied through In-Ground Bait Stations Surrounding Mounds.

The efficacy of bistrifluron termite bait was evaluated using in-ground bait stations placed around Coptotermes lacteus mounds in south-eastern Australia during late summer and autumn (late February to late May 2012). Four in-ground bait stations containing timber billets were placed around each of twenty mounds. Once sufficient numbers of in-ground stations were infested by termites, mounds were assigned to one of four groups (one, two, three or four 120 g bait canisters or 120 to 480 g bait in total per mound) and bait canisters installed. One mound, nominally assigned treatment with two canisters ultimately had no termite interception in any of the four in-ground stations and not treated. Eighteen of the remaining 19 colonies were eliminated by 12 weeks after bait placement, irrespective of bait quantity removed (range 43 to 480 g). Measures of colony decline—mound repair capability and internal core temperature—did not accurately reflect the colony decline, as untreated colonies showed a similar pattern of decline in both repair capability and internal mound core temperature. However, during the ensuing spring–summer period, capacity to repair the mound was restored in untreated colonies and the internal core temperature profile was similar to the previous spring–summer period which indicated that these untreated colonies remained healthy.

Diagenesis of Pennsylvanian phylloid algal mounds from the southern Cantabrian Zone (Spain)

The Pennsylvanian phylloid algal mounds exposed in the Cervatina Limestone of the Cantabrian Zone (NW Spain) developed during the highstands of high-frequency shallowing-upward cycles and lack evidence of subaerial exposure at their tops. Mound core facies are composed of massive bafflestones with variable amounts of calcite cements and anchicodiacean phylloid algae with cyathiform thalli preserved in growth position. Through standard petrographic, isotopic (δ18O and δ13C), major and trace element (Ca, Mg, Fe, Mn, Sr) and cathodoluminescence analyses, five calcite cement phases (cement 1 (C1)–cement 5 (C5)) have been identified filling primary and secondary pores. Early marine diagenesis is represented by micritization and non-luminescent to mottled-dull luminescent high-Mg calcite fibrous marine cement (C1). A dissolution phase then occurred and created vuggy and moldic pores. Based on the absence of field or petrographical or geochemical evidence of exposure, it is inferred that dissolution occurred in near-surface undersaturated marine waters with respect to aragonite related to progressive organic matter oxidation. Secondary porosity was subsequently filled by dull-bright-dull bladed high-Mg calcite (C2), which precipitated in the early shallow burial from marine-derived pore waters. Remaining porosity was occluded by shallow-burial precipitates consisting of non-luminescent scalenohedral low-Mg calcite (C3) followed by non-ferroan dull luminescent calcite spar (C4). Latter phases of calcite spar exhibiting non- and dull luminescence (C5) are associated with burial calcite veins. Low δ18O values (around −8‰), moderately depleted δ13C values (around 0.5‰) and the homogeneity of trace element contents of carbonate matrix, cements and vein-filling calcites suggest burial isotopic re-equilibration and recrystallization, probably in Early Permian times during post-thrusting orocline formation.

New data on the incertae sedis biota and foraminifera of the mid-Famennian Baelen Member (Late Devonian, eastern Belgium)

The Baelen mud mounds in eastern Belgium represent a local member of the mid-Famennian Souverain-Pre Formation (an important carbonate interval within the Condroz Sandstone Group). The lower part of this member contains silty bioclastic wackestones and packstones that are particularly rich in the problematical protists Serrisinella and Dreesenulella. Plurilocular foraminifera (Septabrunsiina and Baelenia) and rare solitary rugose corals (Neaxon? sp.) occur within crinoidal grainstones (tempestites) interfingering with the latter bioclastic wacke-/packstones and with red-stained stromatactoid spiculitic mudstones (carbonate mud mound core facies). Although Serrisinella is quite common in other mid-Famennian limestones of Belgium, Dreesenulella is almost endemic of the Baelen Member. Both genera apparently inhabited the muddy sediment-water interface, constituting meadows probably in zones of intermittently strong bottom currents. The taxonomic similarities between Dreesenulella and Saccamminopsis are discussed, as well as their possible affinities with the Xenophyophora and Kokomiacea. The first stages of the Septabrunsiina–Baelenia foraminiferal lineage are analysed in detail. The taxonomic and palaeoecological positioning of Serrisinella and Dreesenulella adds to the discussion about the palaeobathymetry of the Baelen mud mounds and corroborates sedimentological evidence for their relatively shallow carbonate ramp depositional setting.

Accretionary Mechanisms and Temporal Sequence of Formation of the Boda Limestone Mud-Mounds (Upper Ordovician), Siljan District, Sweden

Abstract Late Ordovician mud-mounds in the Boda Limestone, Siljan area, central Sweden, consist mainly of massive spiculitic stromatactis limestone similar to other well-known Paleozoic mud-mounds. The mound cores are predominantly formed by spiculite and ostracod-rich mudstone and/or wackestone, and networks of spar-filled syndepositional cavities. The mounds of the Boda Limestone are specific in two ways: (1) large parts of the lower mound cores are formed by a Palaeoporella framestone and/or bafflestone with signs of early recrystallization and cementation; and (2) the stromatactis facies is accompanied by masses of limestone with non-stromatactis cryptocrystalline patches. Cryptocrystalline patches are filled with massive, fibrous low-Mg calcite, have cloudy, transitional margins, contain randomly spaced skeletal grains and dolomitic micro-inclusions, and are interpreted as recrystallized patches of the original host lime mud. Models of formation of Paleozoic mud-mounds generally hypothesize accretionary processes that are based on sponge biomass degradation and associated diagenetic processes. In the Boda Limestone Palaeoporella skeleton disintegration, early recrystallization, and additionally, cementation were essential for the mound formation. The Boda mounds exemplify that formation of Paleozoic mud-mounds reflects a spectrum of different essentially diagenetic accretionary mechanisms. This diversity should be taken into account in future discussions about Paleozoic mud-mound formation. The new name Osmundsberget Formation is given for a Hirnantian succession of brachiopod-rich limestone above the Boda Limestone. The Osmundsberget Formation occurs only in direct geographical vicinity to the mud-mounds.

Ground-penetrating radar imaging of Albian rudist buildups, central Texas

Rudist buildups are important reservoirs in many Cretaceous fields in the Middle East, but they are generally near or below seismic resolution. The dimension, shape, and architecture of rudist buildups can be assessed using outcrop, although only partly so because of pseudo-2D observations of geobodies intersecting with the outcrop. We used ground-penetrating radar to enhance our understanding of the shape, dimension, and architecture of Albian rudist buildups in two outcrops in Texas. In the Lake Georgetown spillway, caprinid rudist buildups are 10–30 m wide and 2–7 m high. They are elliptical with an aspect ratio of as much as 1.7. They show no or very little flank development. The older buildup exposed in the Red Bluff Creek area displays 10- to 25-m-wide and 5- to 10-m-high in situ caprinid rudist mound core accumulations with as much as 100-m-wide reworked flanks in the shallower part of the depositional profile. Downdip along the depositional profile, caprinid buildups are 5–20 m wide and 3–7 m high with no flank debris. The buildups in the Lake Georgetown area have similar architecture and comparable size with the downdip buildups exposed in Red Bluff Creek. These buildups were compared with other outcropping Albian buildups in Texas that have different sizes, shapes, and stratigraphic architecture to provide dimensional data that could be used in subsurface reservoir modeling, either for calibrating variogram ranges or to build training images. The rudist buildups exposed in Texas are an order of magnitude smaller than those present in the subsurface in the Middle East, but they have comparable stratigraphic architecture. The size difference might be the result of subsurface buildups being mapped using well-log or core correlations or seismic extractions that cannot resolved at that scale of heterogeneity.

TAPHONOMIC FILTERING IN ORDOVICIAN BRYOZOAN CARBONATE MOUNDS, TRENTON GROUP, MONTMORENCY FALLS, QUEBEC, CANADA

Late Ordovician bryozoan carbonate mounds are present in the upper part of the Deschambault Formation (Trenton Group) at the Montmorency Falls locality, northeast of Quebec City. These mounds are local features within a stratigraphic interval otherwise characterized by a bedded sequence of bryozoan-rich deposits. From the core of the mound to its margins and into the well-bedded off-mound sediments, there is a taphonomic gradient in terms of preservation, automicrite formation, fragmentation, transport, growth versus shelter porosity, and marine cementation. By ruling out both local seepage of nonmarine fluids (nonspecialist fauna, normal-marine carbon and oxygen stable isotopes, near PAAS rare earth element distribution patterns) and differential growth rate (bryozoan zooecium size), mound formation is explained by a positive taphonomic feedback mechanism. Centimeter-size patches of automicrite in mound cores are considered crucial in explaining subtle variations of microtexture, microfacies, and subsequent mound formation. Automicrite (M1) is dark gray, contains microbioclasts, has sharply defined, scalloped outer margins, is commonly gravity defying, and occasionally joins up to bridge multiple bryozoan skeletons. Clusters of microtubules are present within M1 and a first generation of infiltrated microcrystalline carbonate sediment (M2). The size, geometry, and arrangement of these microtubules suggest an origin either from the attachment of nonspicular, keratosan sponges, or from the assimilatory action of marine fungi (so-called Wedl tunnels). In conclusion, a subtle and small-scale secondary reinforcement of bryozoan skeletons by cryptobiontic ephemeral substrates is critical for the development of mounds out of an essentially level-bottom bryozoan community.

Cold-seep-driven carbonate deposits at the Central American forearc: contrasting evolution and timing in escarpment and mound settings

Continuous surface cores of cold-seep carbonates were recovered offshore Pacific Nicaragua and Costa Rica from 800 to 1,500-m water depths (Meteor 66/3) in order to decipher their evolution and methane enriched fluid emanation in contrasting geological settings. Cores from the mounds Iguana, Perezoso, Baula V and from the Jaco Scarp escarpment were used for a multi-method approach. For both settings aragonite was revealed as dominant authigenic carbonate phase in vein fillings and matrix cementation, followed by Mg-calcite as second most abundant. This common precipitation process of CaCO3 polymorphs could be ascribed as indirectly driven by chemical changes of the advecting pore water due to anaerobic oxidation of methane. A more direct influence of seep-related microbial activity on the authigenic mineral assemblage in both settings is probably reflected by the observed minor amounts of dolomite and a dolomite-like CaMg carbonate (MgCO3 ~ 42 %). δ13C data of Jaco Scarp samples are significantly lower (−43 to −56 ‰ PDB) than for mound samples (−22 to −36 ‰ PDB), indicating differences in fluid composition and origin. Noteworthy, δ18O values of Scarp samples correlate most closely with the ocean signature at their time of formation. Documenting the archive potential, a high resolution case study of a mound core implies at least 40 changes in fluid supply within a time interval of approximately 14 ky. As most striking difference, the age data indicate a late-stage downward-progressing cementation front for all three mound cap structures (approx. 2–5 cm/ky), but a significantly faster upward carbonate buildup in the bulging sediments on top of the scarp environment (approx. 120 cm/ky). The latter data set leads to the hypothesis of chemoherm carbonate emplacement in accord with reported sedimentation rates until decompression of the advective fluid system, probably caused by the Jaco Scarp landslide and dating this to approximately 13,000 years ago.

Triassic (Carnian) hexactinellid-thrombolite reef mounds and oolitic bank complex in NW Sichuan, China

The Upper Triassic Carnian hexactinellid-thrombolite reef mound tract was located in a gulf of NW Sichuan, China. To the northwest of the gulf, there was the Songpan–Ganzi deep marine trough, which was connected with Tethys. The foundation for growth of the reef mounds is a thick oolitic bank overlain by a thin bioclastic bank corresponding to the Lower Member of Hanwang Formation (the Formation approximately corresponds to Maantang Formation). The oolitic bank is composed mainly of oolitic grainstone and packstone, and the bioclastic bank is composed mainly of lithoclast-bearing bioclastic packstone and wackestone. Six representative microfacies are differentiated in the bioclastic and oolitic banks, which indicates that the banks were developed in a subtidal shallow-marine environment. Such an environment created a suitable foundation for the growth of siliceous sponge and calci-microbe reef mounds. The reef mounds, inter-mound facies and capping facies correspond to the Upper Member of the Formation. A reef mound is 1.5–80 m in height with a general dome shape, consisting of reef mound core, reef mound flanks and reef mound top which are differentiated by 11 microfacies. The reef mounds are mainly composed of massive hexactinellid-thrombolite boundstone. The inter-mound facies is composed mainly of bioclastic and lithoclastic packstone with one microfacies. The top part of the Upper Member is the capping facies composed of quartz-silt-bearing claystone, which overlies the whole reef mound and bank complex in the study area. Different occurrences of clay and quartz silt in the reef mound and bank complex are characteristic. The oolitic and bioclastic banks and the reef mound core contain <3 % clay, and the outer-flanks and inter-mound facies contain 8–20 % of clay and quartz silt. The capping facies is composed of quartz-silt-bearing claystone. Most of neptunian dikes penetrating the mounds also contain clay and quartz silt. The clay content of reef mounds may have originated from the terrigenous clay mud and quartz silt input of the paleo-lands surrounding the Carnian gulf. The paper has discussed the influence of terrigenous clay mud and quartz silt input to the development of the hexactinellid sponge mounds in the study area, in the light of a comparison of the Carnian siliceous sponge mounds in Sichuan, China with the Upper Jurassic siliceous sponge mounds in Europe and with the recent reef mounds of hexactinosidan sponges in Canada. Additionally the paper has made a comparison of the Carnian siliceous sponge mounds in Sichuan, China with the Upper Jurassic siliceous sponge mounds in Europe, in the field of distribution of siliceous sponge mounds in time and space, reef mound types and microbial crusts contained in siliceous reef mounds. Concerning the extinction of the Carnian siliceous sponge mounds in Sichuan, China the paper has discussed the response of the studied reef mound tract to the Carnian “Reingraben Turnover” or “Black Shale Events” which occurred at the end of the Early Carnian.

Growth Dynamics of Pennsylvanian Carbonate Mounds From A Mixed Terrigenous-Carbonate Ramp In the Puebla De Lillo Area, Cantabrian Mountains, Northern Spain

Abstract Carbonate mounds are widespread in many places around the world and are especially well exposed in the Cantabrian Mountains, northern Spain. This study focuses on the composition and growth dynamics of two large mound complexes well exposed near the village of Puebla de Lillo, 70 km northeast of Leon, and evaluates the impact of sea level, accommodation, and siliciclastic input on mound growth. The mound substrate consists of bedded dark skeletal bindstone. The core facies exhibits patchy growth forms of alternating massive microbial–algal boundstone and skeletal and nonskeletal wackestone, reflecting the overall mound internal composition of smaller coalescent bodies. Microbial activity, as inferred from the volumetrically important clotted peloids, appears to be the main factor leading to the high accumulation rate in the cores. The steeply dipping flanks presumably resulted from early cementation and subsequent lithification and stabilization induced mainly by microbial activity. In the intermound strata, carbonate beds and small mounds alternate with fine-grained sandstone, siltstone, and shales. The intermound carbonates consist of skeletal and intraclastic mudstone to wackestone, whereas algal–microbial boundstone is a minor component. Overall, facies transition from the mound core towards the flanks or the mound-capping beds is gradual. However, the volume of bioclasts and intraclasts increases towards the flank and capping facies, inversely to amount of clotted peloids or micrite. The substrate and the cores of the two mound complexes likely formed in the photic zone, as inferred from the common calcareous algae. Carbonate precipitation favored by microbial activity and algal growth along with gain in accommodation space led to mound-core accretion. The growth of the small mound complexes was most likely stopped by recurrent sea-level fall and siliciclastic input. The large, high-relief mound complex actually kept growing until reaching shallow-water and high-energy conditions. Unlike many late Paleozoic counterparts, these mounds were not subaerially exposed during growth. The great thickness and the aggradational mound growth are indicative of a high subsidence rate. At a later stage, however, siliciclastic input also buried the large mound complex. Rapid subsidence, sea-level fluctuations, and siliciclastic input were thus decisive factors controlling carbonate production. This study reveals that mound complexes nucleated and grew on preexisting paleohighs, maintaining consistent growth in these specific settings. Paleohighs, recurrent sea-level fluctuations (presumably linked to glacio-eustasy), and episodic siliciclastic input are the principal factors that controlled the shape, size, and growth evolution. Furthermore, the internal architecture as a mosaic of juxtaposed small bodies composing the complexes represents an important finding for better understanding of mound growth and, thus, for better constraining reservoir heterogeneity, particularly for upper Paleozoic deposits.

Development and reservoir significance of mud mounds in Sinian Dengying Formation, Sichuan Basin

Abstract Based on core and outcrop profile observation, the characteristics and reservoir significance in oil and gas accumulation of mud mounds in the Sinian Dengying Formation of the Sichuan Basin were studied. Small-scale mud mounds in platform are widespread in the Sinian Dengying Formation, Sichuan Basin, mostly less than 2 m thick per cycle, but high in occurrence frequency, especially in Member 2 and Member 4 of the Sinian Dengying Formation. Particles constituting the mud mounds are thrombolite, algal stromatolite, oncolite and bindstone, related to cyanobacteria biocoenosis buildup, which bind and capture lime mud for the mud mound construction, and the relevant rock types include algal bound clotted dolomitite, algal bound frame-dolomitite, and undulating-cylindrical algal stromatolite associated with clotted dolomitite. Multiphase mud mounds with positive relief have abundant frame structures, zebra structures and stromatactis. Two kinds of depositional models are mound base-core-flat and mound base-core-cap, the former is more common. The mud mounds are closely related to reservoirs. Different sizes of pores developed in the mud mound core provide space for oil and gas accumulation, so the mound-shoal complex is the main exploration target of the Sinian Dengying Formation.

Sedimentology and stromatoporoid palaeoecology of Frasnian (Upper Devonian) carbonate mounds in southern Belgium

Da Silva, A.-C., Kershaw, S. & Boulvain, F. 2011: Sedimentology and stromatoporoid palaeoecology of Frasnian (Upper Devonian) carbonate mounds in southern Belgium. Lethaia, Vol. 44, pp. 255–274. Stromatoporoids are the most abundant large skeletal organisms in middle Frasnian carbonate mound environments of southern Belgium. They occur in environments ranging from flank and off-mound, mound core, shallow mound and restricted mound. A detailed log and comprehensive sampling of stromatoporoids in a single section cutting through all middle Frasnian mound levels in La Boverie–Rochefort Quarry, near Rochefort and Dinant reveals a stromatoporoid assemblage comprising 10 genera; 472 samples, containing an overall total of 3079 stromatoporoids (including complete and fragmented specimens) have been studied. The following list gives abundance using numbers of specimens and areas of total stromatoporoid area on outcrop surfaces (% number; % area in cm2): Actinostroma (0.4; 9.2), Amphipora (15.5; 1.7), Atelodictyon (0.2; 4.4), Clathrocoilona (0.3; 0.5), Euryamphipora (13.7; 0.7), Idiostroma (2; 1.9), Salairella (1.2; 9.6), branching Stachyodes (43.2; 59.1), laminar Stachyodes australe (1.9; 1.3), Stictostroma (4.8; 13.1) and Trupetostroma (0.2; 0.8), showing that Stachyodes is approximately half of the total assemblage. Deeper environments contain more abundant low profile forms, shallow water facies contain more domical and bulbous forms; branching forms are ubiquitous. Low profile stromatoporoids are likely to have been important sediment stabilizers that may have led to expansion of the carbonate factory, and they may have therefore contributed to the structural building of the mounds. Stromatoporoid-coral intergrowths are observed in only Stictostroma suggesting that there is a close biological relationship between them; however, stromatoporoid skeletons in almost all cases appear to be unaffected by the presence of intergrown corals, suggesting they were commensals. □Frasnian, Late Devonian, mounds, palaeoecology, stromatoporoid.

Reservoir Potential of Silurian Carbonate Mud Mounds in the Southern Sichuan Basin, Central China

: Lower Silurian mud mounds of the Shinuilan Formation, located in the southern Sichuan Basin, China, have developed in open shelf settings in deeper water than shallow-water reef-bearing limestones that occur in the region. An integration of the outcrop, drill data and seismic profiles show that contemporaneous faults have controlled the boundary and distribution of the sedimentary facies of Lower Silurian rocks in the southern Sichuan Basin. Mounds appear to have developed in the topographic lows formed by synsedimentary faulting, on the shelf of the Yangtze Platform. Average mound thickness is 20 m, maximum 35 m. Mounds are composed mainly of micrite, possibly microbially bound, and are overlain by shales. Mound tops are preferentially dolomitized, with the Mg2+ source probably from the clay content of the mound-top carbonate. Microfacies analysis and reconstruction of the diagenetic history reveal that the mound tops have higher porosity, and are gas targets; in contrast, mound cores and limbs show pores filled by three generations of calcite cement, and therefore have a low gas potential.

Vagrant benthos (Annelida; Polychaeta) associated with Upper Ordovician carbonate mud-mounds of subsurface Gotland, Sweden

AbstractMicropalaeontological investigations of Upper Ordovician carbonate mud-mounds and enclosing strata of subsurface Gotland, Sweden, demonstrate that jaw-bearing polychaetes formed the most diverse faunal element associated with these build-ups. Although not present within the mound cores (intra-mound facies), scolecodonts, or polychaete jaws, occur abundantly immediately below and particularly above the mounds; the supra-mound facies also has the most diverse fossil assemblages. By contrast to the scolecodont distribution, the most diverse conodont faunas were recorded in the intra-mound facies. This reinforces the fact that scolecodont and conodont abundance and diversity numbers are commonly inverse to one another, suggesting that these metazoans occupied different niches and responded differently to taphonomical processes. The polychaete assemblage has no less than 27 species belonging to 12 genera, of whichOenonites,MochtyellaandPistoprionare the most abundant. The assemblage has a characteristic Baltic signature and is similar in taxonomic composition to coeval ones from other areas of the Baltoscandian palaeobasin, such as that of present-day Estonia. A principal component analysis clusters the Gotland assemblage most closely to those recorded from shallow to transitional shelf environments of Estonia, indicating that the mud-mounds were formed in such environments.

A comparison of soil organic carbon stock in ancient and modern land use systems in Denmark

SummaryDuring the South Scandinavian Early Bronze Age about 3300 years ago, thousands of burial mounds were constructed of sods from fallow ground used for grazing in Denmark and northern Germany. In some of these mounds a wet, anaerobic core developed, preventing the decomposition of organic matter. A comparison of the organic matter content in these mound cores and the plough layer in modern farmland offers an opportunity to compare the soil organic carbon (SOC) stocks in ancient and modern land use systems and to evaluate the long‐term trends in carbon (C) sequestration in relation to modern farmland with varying inputs of manure and inorganic fertilizers. In the present paper we compare SOC stocks based on integrated horizon‐specific densities and SOC contents in three 3300‐year‐old buried farmland soils, representing the land use system at that time, with results from soil surveys representing modern land use systems with low and high inputs of manure. Results show that, within the upper 0.28 m, which is the average depth of present day plough layers in Denmark, soils receiving manure from intensive pig or cattle production hold c. 60% more SOC than the ancient soils from the South Scandinavian Bronze Age. In contrast, modern arable soils mainly receiving limited inputs of manure hold a SOC stock similar to that of the ancient soils.

Sediment dynamics of a sandy contourite: the sedimentary context of the Darwin cold-water coral mounds, Northern Rockall Trough

Grainsize, mineralogy and current-meter data from the Northern Rockall Trough are presented in order to characterise the sandy contourite that forms the sedimentary environment of the Darwin cold-water coral mounds, and to investigate the impact of this environment on the mound build-up. Large clusters of small cold-water coral mounds, 75 m across and 5 m high, have been found southwest of the Wyville Thomson Ridge, at 900–1,100 m water depth. Their present-day sedimentary environment consists of a subtly sorted sandy contourite, elongated NE–SW, roughly parallel to the contours. Critical erosional and depositional current speeds were calculated, and trends in both the quartz/feldspar and foraminifera fractions of the sands show a bi-directional fining from bedload/erosion-dominated sands in the NE to suspension/deposition-dominated sediments in the SW and towards the S (downslope). This is caused by a gradual reduction in governing current speed, linked to a reduction in slope gradient, and by the increasing distance from the current core in the downslope direction. No specific characteristics were found distinguishing the mound sediments from the surrounding sands: they fit in the overall spatial pattern. Some mound cores show hints of a fining-upward trend. Overall the mound build-up process is interpreted as a result of sediment baffling.