Spheroid Morphology Research Articles

Integrated Approach to Cyclopiazonic Acid Cytotoxicity Using In Vitro (2D and 3D Models) and In Silico Methods

Cyclopiazonic acid (CPA) is an indole-tetramic acid neurotoxin produced by Aspergillus and Penicillium genera present mainly in fruit, cereals and nuts. This study compares the cytotoxicity produced by CPA after 24, 48 and 72 h of exposure using both monolayers and 3D spheroids in human neuroblastoma SH-SY5Y cells. Furthermore, CPA toxicokinetics was evaluated using in silico models. Cytotoxicity increased dose- and time-dependently, as shown by the MTT assay. The lowest CPA IC50 values were found in the monolayer study compared to the 3D spheroids at all exposure times (24 h: 864.01 vs. 1132; 48 h: 437 vs. 1069; 72 h: 392 vs. 567 nM). The CPA exposure on SH-SY5Y spheroid organization and morphology was also studied. Morphological changes, including spheroid disaggregation, were observed after mycotoxin exposure. The in silico methods, SwissADME and admetSAR, were used for short and full ADMEt profiles of CPA. The ADMEt predictive profile shows high gastrointestinal absorption and ability to penetrate the blood–brain barrier. Including in silico studies emphasizes the comprehensive approach to understanding mycotoxin toxicity and risk assessment. By combining in vitro 3D spheroid models with computational simulations, this study aims to provide a holistic perspective on the effects of CPA, enhancing the accuracy and relevance of our findings.

Implications of GPIIB-IIIA Integrin and Liver X Receptor in Platelet-Induced Compression of Ovarian Cancer Multi-Cellular Spheroids

Background: Platelets have been shown to promote ovarian cancer; however, the mechanism is poorly understood. Previously, we demonstrated that platelets reduce the size and increase the density of multi-cellular ovarian cancer spheroids in cell cultures. The objectives of this study were to determine if platelet inhibitors could counteract these effects, and to explore the mechanisms involved. Methods: FDA-approved platelet inhibitors were screened for their abilities to alter platelet effects on ovarian cancer spheroids. Mass spectrometry was used to identify proteins significantly altered in cancer cells upon exposure to platelets. The effects of platelets and/or liver x receptor agonists or antagonists on LXR activity were measured using ES-2 ovarian cancer cells transduced with an LXR-reporter vector. Results: Eptifibatide, a GPIIB-IIIA integrin inhibitor, and dipyridamole, an adenosine reuptake inhibitor, reduced and enhanced platelet effects on ovarian cancer spheroids, respectively. Proteomic studies identified the LXR/RXR and integrin pathways as mediators of platelet effects on ovarian cancer, and downstream effectors of eptifibatide. Conclusions: Integrin pathways and their downstream LXR/RXR effectors are implicated in how platelets alter ovarian cancer spheroid morphology. These results support studying eptifibatide and LXR/RXR agonists as candidate drugs for repurposing as therapeutic strategies to counteract platelet promotion of ovarian cancer.

Targeting CREB-binding protein (CBP) abrogates colorectal cancer stemness through epigenetic regulation of C-MYC.

Colorectal cancer (CRC) is a common cancer worldwide with an increasing annual incidence. Cancer stem cells (CSCs) play important roles in the occurrence, development, recurrence, and metastasis of CRC. The molecular mechanism regulating the development of colorectal CSCs remains unclear. The discovery of human induced pluripotent stem cells (hiPSCs) through somatic cell reprogramming has revolutionized the fields of stem cell biology and translational medicine. In the present study, we converted hiPSCs into cancer stem-like cells by culture with conditioned medium (CM) from CRC cells. These transformed cells, termed hiPSC-CSCs, displayed cancer stem-like properties, including a spheroid morphology and the expression of both pluripotency and CSC markers. HiPSC-CSCs showed tumorigenic and metastatic abilities in mouse models. The epithelial-mesenchymal transition phenotype was observed in hiPSC-CSCs, which promoted their migration and angiogenesis. Interestingly, upregulation of C-MYC was observed during the differentiation of hiPSC-CSCs. Mechanistically, CREB binding protein (CBP) bound to the C-MYC promoter, while histone deacetylase 1 and 3 (HDAC1/3) dissociated from the promoter, ultimately leading to an increase in histone acetylation and C-MYC transcriptional activation during the differentiation of hiPSC-CSCs. Pharmacological treatment with a CBP inhibitor or abrogation of CBP expression with a CRISPR/Cas9-based strategy reduced the stemness of hiPSC-CSCs. This study demonstrates for the first time that colorectal CSCs can be generated from hiPSCs. The upregulation of C-MYC via histone acetylation plays a crucial role during the conversion process. Inhibition of CBP is a potential strategy for attenuating the stemness of colorectal CSCs.

Impact of Polydeoxyribonucleotides on the Morphology, Viability, and Osteogenic Differentiation of Gingiva-Derived Stem Cell Spheroids

Background and Objectives: Polydeoxyribonucleotides (PDRN), composed of DNA fragments derived from salmon DNA, is widely recognized for its regenerative properties. It has been extensively used in medical applications, such as dermatology and wound healing, due to its ability to enhance cellular metabolic activity, stimulate angiogenesis, and promote tissue regeneration. In the field of dentistry, PDRN has shown potential in promoting periodontal healing and bone regeneration. This study aims to investigate the effects of PDRN on the morphology, survival, and osteogenic differentiation of gingiva-derived stem cell spheroids, with a focus on its potential applications in tissue engineering and regenerative dentistry. Materials and Methods: Gingiva-derived mesenchymal stem cells were cultured and formed into spheroids using microwells. The cells were treated with varying concentrations of PDRN (0, 25, 50, 75, and 100 μg/mL) and cultivated in osteogenic media. Cell morphology was observed over seven days using an inverted microscope, and viability was assessed with Live/Dead Kit assays and Cell Counting Kit-8. Osteogenic differentiation was evaluated by measuring alkaline phosphatase activity and calcium deposition. The expression levels of osteogenic markers RUNX2 and COL1A1 were quantified using real-time polymerase chain reaction. RNA sequencing was performed to assess the gene expression profiles related to osteogenesis. Results: The results demonstrated that PDRN treatment had no significant effect on spheroid diameter or cellular viability during the observation period. However, a PDRN concentration of 75 μg/mL significantly enhanced calcium deposition by Day 14, suggesting increased mineralization. RUNX2 and COL1A1 mRNA expression levels varied with PDRN concentration, with the highest RUNX2 expression observed at 25 μg/mL and the highest COL1A1 expression at 75 μg/mL. RNA sequencing further confirmed the upregulation of genes involved in osteogenic differentiation, with enhanced expression of RUNX2 and COL1A1 in PDRN-treated gingiva-derived stem cell spheroids. Conclusions: In summary, PDRN did not significantly affect the viability or morphology of gingiva-derived stem cell spheroids but influenced their osteogenic differentiation and mineralization in a concentration-dependent manner. These findings suggest that PDRN may play a role in promoting osteogenic processes in tissue engineering and regenerative dentistry applications, with specific effects observed at different concentrations.

Improved functionality of hepatic spheroids cultured in acoustic levitation compared to existing 2D and 3D models

Hepatic spheroids are of high interest in basic research, drug discovery and cell therapy. Existing methods for spheroid culture present advantages and drawbacks. An alternative technology is explored: the hepatic spheroid formation and culture in an acoustofluidic chip, using HepaRG cell line. Spheroid formation and morphology, cell viability, genetic stability, and hepatic functions are analyzed after 6 days of culture in acoustic levitation. They are compared to 2D culture and non-levitated 3D cultures. Sizes of the 25 spheroids created in a single acoustofluidic microphysiological system are homogeneous. The acoustic parameters in our system do not induce cell mortality nor DNA damage. Spheroids are cohesive and dense. From a functional point of view, hepatic spheroids obtained by acoustic levitation exhibit polarity markers, secrete albumin and express hepatic genes at higher levels compared to 2D and low attachment 3D cultures. In conclusion, this microphysiological system proves not only to be suitable for long-term culture of hepatic spheroids, but also to favor differentiation and functionality within 6 days of culture.

Dynamic cell culture modulates colon cancer cell migration in a novel 3D cell culture system

The progression of cancer cell migration, invasion and subsequent metastasis is the main cause of mortality in cancer patients. Through creating more accurate cancer models, we can achieve more precise results, which will lead to a better understanding of the invasion process. This holds promise for more effective prevention and treatment strategies. Although numerous 2D and 3D cell culture systems have been developed, they poorly reflect the in vivo situation and many questions have remained unanswered. This work describes a novel dynamic 3D cell culture system aimed at advancing our comprehension of cancer cell migration. With the newly designed cultivation chamber, 3D tumor spheroids were cultivated within a collagen I matrix in the presence of fluid flow to study the migration of cancer cells from spheroids in the matrix. Using light sheet microscopy and histology, we demonstrated that the morphology of spheroids is influenced by dynamic culture and that, in contrast to static culture, spheroids in dynamic culture are characterized by the absence of a large necrotic core. Additionally, this influence extends to an increase in the size of migration area, coupled with an increase in expression of some genes related to epithelial-mesenchymal transition (EMT). The results here highlight the importance of dynamic culture in cancer research. Although the dynamic 3D cell culture system in this study was used to investigate migration of one cell type into a matrix, it has the potential to be further developed and used for more complex models consisting of different cell types or to analyze other steps of metastasis development such as transendothelial migration or extravasation.

Visualization of 2D and 3D Tissue Models via Size-Selected Aqueous AgInS/ZnS Quantum Dots.

Three-dimensional (3D) spheroid cell cultures of fibroblast (L929) and tumor mammary mouse (4T1) were chosen as in vitro tissue models for tissue imaging of ternary AgInS/ZnS fraction quantum dots (QDs). We showed that the tissue-mimetic morphology of cell spheroids through well-developed cell-cell and cell-matrix interactions and distinct diffusion/transport characteristics makes it possible to predict the effect of ternary AgInS/ZnS fraction QDs on the vital activity of cells while simultaneously comparing with classical two-dimensional (2D) cell cultures. The AgInS/ZnS fractions, emitting in a wide spectral range from 635 to 535 nm with a mean size from ∼3.1 ± 0.8 to ∼1.8 ± 0.4 nm and a long photoluminescence lifetime, were separated from the initial QD ensemble by using antisolvent-induced precipitation. For ternary AgInS/ZnS fraction QDs, the absence of toxicity at different QD concentrations was demonstrated on 2D and 3D cell structures. QDs show a robust correlation between numerous factors: their sizes in biological fluids over time, penetration capabilities into 2D and 3D cell structures, and selectivity with respect to penetration into cancerous and healthy cell spheroids. A reproducible protocol for the preparation of QDs along with their unique biological properties allows us to consider ternary AgInS/ZnS fraction QDs as attractive fluorescent contrast agents for tissue imaging.

Biophysical features of plant-derived nanovesicles: Focus on almonds

Almond is a traditional food with established beneficial effects on health. Nothing is known about the presence of extracellular vesicles (EVs), recently isolated from other plant material, ingested with food, or as engineered bioactive nanovectors. Aiming to develop and optimize a method to isolate almonds derived nano vesicles (ADNVs), we tested different protocols on pure, blanched and roasted almonds, and investigated the resulting biophysical features.The most feasible and valid method was the sucrose-based ultracentrifugation (DGUC). Size distribution ranged on average 100–200 nm. A negative zeta-potential in the range of –27 to –21 mV has been measured. Microscopy showed a spheroid morphology and preserved structural integrity of isolated ADNVs. Pure almond ADNVs showed the greater amount of TET8; PEN1 was also found, although cooking treatments resulted in a decrease.Attention should be paid to sample managing during DGUC steps and to sample deposition and drying for microscopy procedures. Our findings contribute to enriching the hot issue on EVs research from edible sources, giving reason to their possible role in interspecies communication, and their exploitation for the delivery of bioactive compounds or therapeutics molecules. The potentiality of almonds' industrial residuals should be investigated in further research.

Promoting Human Intestinal Organoid Formation and Stimulation Using Piezoelectric Nanofiber Matrices.

Human organoid model systems have changed the landscape of developmental biology and basic science. They serve as a great tool for human specific interrogation. In order to advance our organoid technology, we aimed to test the compatibility of a piezoelectric material with organoid generation, because it will create a new platform with the potential for sensing and actuating organoids in physiologically relevant ways. We differentiated human pluripotent stem cells into spheroids following the traditional human intestinal organoid (HIO) protocol atop a piezoelectric nanofiber scaffold. We observed that exposure to the biocompatible piezoelectric nanofibers promoted spheroid morphology three days sooner than with the conventional methodology. At day 28 of culture, HIOs grown on the scaffold appeared similar. Both groups were readily transplantable and developed well-organized laminated structures. Graft sizes between groups were similar. Upon characterizing the tissue further, we found no detrimental effects of the piezoelectric nanofibers on intestinal patterning or maturation. Furthermore, to test the practical feasibility of the material, HIOs were also matured on the nanofiber scaffolds and treated with ultrasound, which lead to increased cellular proliferation which is critical for organoid development and tissue maintenance. This study establishes a proof of concept for integrating piezoelectric materials as a customizable platform for on-demand electrical stimulation of cells using remote ultrasonic waveforms in regenerative medicine.

The morphology of cell spheroids in simple shear flow

Cell spheroids are a widely used model to investigate cell-cell and cell-matrix interactions in a 3D microenvironment in vitro. Most research on cell spheroids has been focused on their response to various stimuli under static conditions. Recently, the effect of flow on cell spheroids has been investigated in the context of tumor invasion in interstitial space. In particular, microfluidic perfusion of cell spheroids embedded in a collagen matrix has been shown to modulate cell-cell adhesion and to represent a possible mechanism promoting tumor invasion by interstitial flow. However, studies on the effects of well-defined flow fields on cell spheroids are lacking in the literature. Here, we apply simple shear flow to cell spheroids in a parallel plate apparatus while observing their morphology by optical microscopy. By using image analysis techniques, we show that cell spheroids rotate under flow as rigid prolate ellipsoids. As time goes on, cells from the outer layer detach from the sheared cell spheroids and are carried away by the flow. Hence, the size of cell spheroids declines with time at a rate increasing with the external shear stress, which can be used to estimate cell-cell adhesion. The technique proposed in this work allows one to correlate flow-induced effects with microscopy imaging of cell spheroids in a well-established shear flow field, thus providing a method to obtain quantitative results which are relevant in the general field of mechanobiology.

Caki-1 Spheroids as a 3D Model for Studying Free Fatty Acid-Induced Proximal Tubule Lipotoxicity

Three-dimensional (3D) multicellular spheroid shows a biological complexity resembling native tissue in comparison to conventional monolayer cultures, making it a better model system to assess drug effcacy and cytotoxicity. The main aim of this study was to examine the usefulness of Caki-1, a human proximal tubule (PT) representative cell line, as a 3D model system for studying free fatty acid-induced PT lipotoxicity. Caki-1 spheroids were generated and maintained on ultra-low attachment plates and characterized regarding time-dependent changes in morphology and functionality. In optimal 3D culture conditions, Caki-1 cells formed well-defined large compact 3D spheroids with uniform morphology, good circularity, and increased diameter from days 2-10. There was no change when the spheroids were incubated with lipid-free bovine serum albumin (BSA, 0.5%) from day 6 to 10. Chronic exposure to palmitate (300 μM) resulted in dispersed and flattened spheroid morphology, with a larger number of dead cells in the peripheral layers and decreased spheroid core. Moreover, palmitate-treated spheroids showed a significant increase in caspase-3 activity at the external layers of the spheroids, suggesting that the detached cells underwent apoptosis. Simultaneous addition of oleate (200 μM) prevents palmitate-induced spheroid disintegration and cell death in Caki-1 3D culture. Mechanistically, palmitate triggered endoplasmic reticulum (ER) stress and autophagy dysfunction, as evidenced by significantly increased protein levels of ER stress markers AFT4 and CHOP, and autophagy substrate p62. Oleate upregulated adipose differentiation-related protein (ADRP, a lipid droplet-associated protein), and promoted lipid droplet formation in palmitate-treated Caki-1 cells. These results indicate that Caki-1 3D spheroids are a simple and reproducible in vitro system for lipotoxicity study. It can potentially be used for evaluating human renal proximal tubular toxicity and drug screening. NIH/NIGMS R16GM149499, NIH TL1DK136047. This is the full abstract presented at the American Physiology Summit 2024 meeting and is only available in HTML format. There are no additional versions or additional content available for this abstract. Physiology was not involved in the peer review process.

Morphological and Dimensional Evolution of Nanosized Amorphous Silicon Nitride in α-Fe: Diffusional and Elastic Effects

We present a detailed analysis based on both experimental and 3D modelling approaches of the unique silicon nitride precipitation sequence observed in ferritic Fe-Si alloys upon nitriding. At 570 °C, Si3N4 silicon nitride was shown to form as an amorphous phase into α-Fe ferrite matrix, which is morphologically unstable over time. Precipitates nucleated with a spheroidal shape, then developed a cuboidal shape for intermediate sizes and octapod-like morphology for a longer time. Using transmission electron microscopy, we show that the transition between spheroid and cuboid morphology depended on particle size and resulted from competition between interfacial energy and elastic strain energy. The resulting morphology was then shown to be a cuboid shape whose faces were always parallel to the {100} planes of the α-Fe; the <100> directions of the matrix corresponded to the elastically soft directions. There was a critical size of around 45 nm for which the transition between the cuboid shape and the octapod-like morphology took place. This was characterised by a transformation of quasi-flat facets into concave ones and the development of lobes in the <111> directions of the bcc crystal. To better assess the kinetic effects of diffusion fields and internal stresses on the morphological instability observed, an original 3D model that explicitly coupled phase transformations and mechanical fields was developed and applied. The latter, validated on the basis of model cases, was shown to be able to describe the time-evolution of both chemical and mechanical fields and their interactions in diffusive mass transport. Using a model system, it was shown that the concentration field around the precipitates and the internal stresses played opposing roles in the cuboid to octapod-like morphological instability. This work gives some clarification regarding the morphological evolution of amorphous Si3N4 precipitates, an important point for controlling the mechanical properties of nitrogen steels.

PALB2-mutated human mammary cells display a broad spectrum of morphological and functional abnormalities induced by increased TGFβ signaling.

Heterozygous mutations in any of three major genes, BRCA1, BRCA2 and PALB2, are associated with high-risk hereditary breast cancer susceptibility frequently seen as familial disease clustering. PALB2 is a key interaction partner and regulator of several vital cellular activities of BRCA1 and BRCA2, and is thus required for DNA damage repair and alleviation of replicative and oxidative stress. Little is however known about how PALB2-deficiency affects cell function beyond that, especially in the three-dimensional setting, and also about its role during early steps of malignancy development. To answer these questions, we have generated biologically relevant MCF10A mammary epithelial cell lines with mutations that are comparable to certain clinically important PALB2 defects. We show in a non-cancerous background how both mono- and biallelically PALB2-mutated cells exhibit gross spontaneous DNA damage and mitotic aberrations. Furthermore, PALB2-deficiency disturbs three-dimensional spheroid morphology, increases the migrational capacity and invasiveness of the cells, and broadly alters their transcriptome profiles. TGFβ signaling and KRT14 expression are enhanced in PALB2-mutated cells and their inhibition and knock down, respectively, lead to partial restoration of cell functions. KRT14-positive cells are also more abundant with DNA damage than KRT14-negative cells. The obtained results indicate comprehensive cellular changes upon PALB2 mutations, even in the presence of half dosage of wild type PALB2 and demonstrate how PALB2 mutations may predispose their carriers to malignancy.

Abstract 173: Studying the interaction between macrophages and solid stress in novel models of the tumor immune microenvironment

Abstract Glioblastoma (GBM) is one of the most aggressive forms of cancer, resisting conventional and immune-based therapies and typically killing patients within two years of diagnosis. This is largely due to the immunosuppressive GBM tumor microenvironment (TME), mediated in large part by tumor-resident macrophages. Macrophages’ role as immune regulators, as well as their sheer quantity in brain tumors, makes them attractive therapeutic targets. The GBM TME also features mechanical abnormalities. As a tumor grows, it expands into the surrounding brain, generating compressive solid stress. Macrophages can contribute to up to half of tumor mass and are known to respond to mechanical cues, allowing them to both contribute to and respond to solid stress, but this relationship has not yet been explored experimentally. To isolate the contribution of macrophages on solid stress, we incorporated RAW264.7 murine macrophages into agarose gels with varying stiffnesses. Over time, spheroids form as the cells proliferate. Because cells cannot alter agarose, cell aggregates must generate stress as they grow and displace the surrounding gel matrix. The resulting agarose-embedded spheroids were stained with calcein AM to observe spheroid viability and morphology. Using confocal microscopy and image processing, we obtained the final spheroid geometry and imported it into COMSOL to model the solid stress resulting from spheroid formation. Our initial experiments show that macrophages have distinct growth patterns dependent on the stiffness of their surrounding gel. At larger sizes, the spheroids adopt an ellipsoid shape and generate a distinct stress field compared to spheroidal shapes. To stimulate the solid stress that macrophages experience within a growing mass, we applied a custom weight to macrophages grown on a porous membrane. This applies 0.15 kPa of compressive solid stress, corresponding to the stress measured in murine glioma models. After 24 hours of compression, macrophages upregulate expression of both nitric oxide synthase and arginase-1, canonical M1 and M2 markers, respectively. This indicates that compression causes a more complex phenotype than can be described by the traditional M1/M2 axis, something that has been observed in tumor-associated macrophages. We also found an apparent difference in the fluorescence lifetime of compressed and uncompressed macrophages, indicating that compression alters macrophage metabolism. Both the spheroid and compression culture models are unique in the context of macrophages. This work will elucidate key pathways involved in myeloid “immunomechanics” and inform strategies to target the innate immune system in cancers such as GBM, as well as other immunological diseases. Citation Format: Alice Burchett, Saeed Siri, Hao Chen, Scott Howard, Meenal Datta. Studying the interaction between macrophages and solid stress in novel models of the tumor immune microenvironment [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 173.

Abstract 5386: Increased sprouting angiogenesis in a microphysiological model of cisplatin-resistant recurrent lung cancers

Abstract Non-small cell lung cancer (NSCLC) constitutes 85% of total lung cancer cases and first-line therapies still often employ the platinum-based agents. Cisplatin therapy for NSCLC often leads to relapse of aggressive tumors with high metastatic potential after a period of dormancy. We hypothesize that cisplatin-resistant tumor cell phenotypes will increase features of aggressivity including sprouting angiogenesis in microphysiological models of NSCLC. First, we engineered various TME configurations using A549 cell spheroids and cancer associated fibroblasts (CAF) to establish a baseline of tumor cell proliferation, ECM deposition, and expression of proangiogenic and proinflammatory genes. Next, we generated cisplatin-resistant (Cis-R) A549 sub-lines to test the hypothesis that 3D tumor models engineered using these drug-resistant cells will capture hallmarks of highly aggressive recurrent tumors such as increased expression of progression-associated genes, increased induction of local stromal reactions and more profound angiogenesis. We treated parent A549 with 25 μM cisplatin for 96 hours followed by at least 14 days of recovery to generate Cis-R A549 cells. Interestingly, Cis-R spheroids exhibited significantly lower rates of proliferation (P<0.01) relative to parent A549 spheroids as measured by Ki67 index. Cis-R cells and spheroids exhibit increased genetic expression for genes involved in inflammation, EMT, proliferation and chemoresistance. Furthermore, Cis-R cells in 2D displayed a mesenchymal-like morphology and further exhibited dysmorphic spheroid morphology in 3D. We then developed a membrane free microphysiological system (MPS) comprised of two adjacent and contiguous tissue layers to investigate cancer mediated angiogenesis. We seeded one layer with lung fibroblasts and endothelial cells, which formed a vascularized network, while the other lane was cultured with no cells (control), parent A549 spheroids, or Cis-R A549 spheroids. Media void of VEGF was used throughout the duration of the experiment to isolate the effect of TME-derived factors. We measured increased angiogenetic sprouting induced by Cis-R tissues relative to parent using the following metrics: sprout density (Cis-R = 49.86 ± 10.93 µm/µm2, parent = 13.73 ± 4.12 µm/µm2, blank = 14.76 ± 4.22 µm/µm2), sprout length (Cis-R = 15006 ± 5507 µm, parent = 2466 ± 639.1 µm, blank = 4749 ± 1547 µm), and sprout area fraction (Cis-R = 0.10 ± 0.028, parent = 0.041 ± 0.010, blank = 0.032 ± 0.0095). Thus, the creation of drug resistant tumor cell sub lines enables the construction of more aggressive engineered tumor microenvironments. Future iterations of our MPS model will be used to investigate angiogenesis in the context of additional cancers, including breast and colon, while transitioning to the use of patient-derived organoids. Citation Format: Elisabet Olsen, G. Wills Kpeli, Omar M.K. Ahmad, Mark Mondrinos. Increased sprouting angiogenesis in a microphysiological model of cisplatin-resistant recurrent lung cancers [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 5386.

Evaluation of gelatin bloom strength on gelatin methacryloyl hydrogel properties

Gelatin methacryloyl (GelMA) hydrogels are widely used for a variety of tissue engineering applications. The properties of gelatin can affect the mechanical properties of gelatin gels; however, the role of gelatin properties such as bloom strength on GelMA hydrogels has not yet been explored. Bloom strength is a food industry standard for describing the quality of gelatin, where higher bloom strength is associated with higher gelatin molecular weight. Here, we evaluate the role of bloom strength on GelMA hydrogel mechanical properties. We determined that both bloom strength of gelatin and weight percent of GelMA influenced both stiffness and viscoelastic ratio; however, only bloom strength affected diffusivity, permeability, and pore size. With this library of GelMA hydrogels of varying properties, we then encapsulated Swan71 trophoblast spheroids in these hydrogel variants to assess how bloom strength affects trophoblast spheroid morphology. Overall, we observed a decreasing trend of spheroid area and Feret diameter as bloom strength increased. In identifying clear relationships between bloom strength, hydrogel mechanical properties, and trophoblast spheroid morphology, we demonstrate that bloom strength should considered when designing tissue engineered constructs.

Construction and applications of the EOMA spheroid model of Kaposiform hemangioendothelioma

BackgroundKaposiform hemangioendothelioma (KHE) is a rare intermediate vascular tumor with unclear pathogenesis. Recently, three dimensional (3D) cell spheroids and organoids have played an indispensable role in the study of many diseases, such as infantile hemangioma and non-involuting congenital hemangiomas. However, few research on KHE are based on the 3D model. This study aims to evaluate the 3D superiority, the similarity with KHE and the ability of drug evaluation of EOMA spheroids as an in vitro 3D KHE model.ResultsAfter two days, relatively uniform morphology and high viability of EOMA spheroids were generated by the rotating cell culture system (RCCS). Through transcriptome analysis, compared with 2D EOMA cells, focal adhesion-related genes such as Itgb4, Flt1, VEGFC, TNXB, LAMA3, VWF, and VEGFD were upregulated in EOMA spheroids. Meanwhile, the EOMA spheroids injected into the subcutaneous showed more obvious KMP than 2D EOMA cells. Furthermore, EOMA spheroids possessed the similar characteristics to the KHE tissues and subcutaneous tumors, such as diagnostic markers (CD31 and LYVE-1), cell proliferation (Ki67), hypoxia (HIF-1α) and cell adhesion (E-cadherin and N-cadherin). Based on the EOMA spheroid model, we discovered that sirolimus, the first-line drug for treating KHE, could inhibit EOMA cell proliferation and downregulate the VEGFC expression. Through the extra addition of VEGFC, the effect of sirolimus on EOMA spheroid could be weakened.ConclusionWith a high degree of similarity of the KHE, 3D EOMA spheroids generated by the RCCS can be used as a in vitro model for basic researches of KHE, generating subcutaneous tumors and drug screening.

Cost-effective 3D lung tissue spheroid as a model for SARS-CoV-2 infection and drug screening.

The SARS-CoV-2 pandemic has spurred an unparalleled scientific endeavor to elucidate the virus' structure, infection mechanisms, and pathogenesis. Two-dimensional culture systems have been instrumental in shedding light on numerous aspects of COVID-19. However, these invitro systems lack the physiological complexity to comprehend the infection process and explore treatment options. Three-dimensional (3D) models have been proposed to fill the gap between 2D cultures and invivo studies. Specifically, spheroids, composed of lung cell types, have been suggested for studying SARS-CoV-2 infection and serving as a drug screening platform. 3D lung spheroids were prepared by coculturing human alveolar or bronchial epithelial cells with human lung stromal cells. The morphology, size, and ultrastructure of spheroids before and after SARS-CoV-2 infection were analyzed using optical and electron microscopy. Immunohistochemistry was used to detect spike protein and, thus, the virus presence in the spheroids. Multiplex analysis elucidated the cytokine release after virus infection. The spheroids were stable and kept their size and morphology after SARS-CoV-2 infection despite the presence of multivesicular bodies, endoplasmic reticulum rearrangement, tubular compartment-enclosed vesicles, and the accumulation of viral particles. The spheroid responded to the infection releasing IL-6 and IL-8 cytokines. This study demonstrates that coculture spheroids of epithelial and stromal cells can serve as a cost-effective infection model for the SARS-CoV-2 virus. We suggest using this 3D spheroid as a drug screening platform to explore new treatments related to the cytokines released during virus infection, especially for long COVID treatment.

Using embossing ice particulate method to prepare polyvinyl alcohol/pullulan hydrogels with surface open pores loaded with microspheres for breast cancer treatment

In the post-operative treatment of breast cancer, early prevention of locoregional recurrence is crucial to avoid metastasis of cells from leftover microtumor tissues. The limitations in conventional drug delivery systems show a growing clinical demand for disease-specific drug-releasing systems. This study explores a novel poly(vinyl alcohol)/pullulan (PVA/PUL) hydrogel system for local drug delivery in post-operative breast cancer treatment. Hydrogel was produced by combination of lyophilization and embossing ice particulate techniques to create microspheres loaded open pores on the hydrogel surface for localized release of doxorubicin-loaded polycaprolactone microspheres (DOX-PCL-MSs). PVA/PUL hydrogel was successfully crosslinked with glutaraldehyde and stabilized hydrogel structure has possessed slow degradation rate and increasing water retention through 12 days. Release of DOX after 7 and 16 days from DOX-PCL-MSs loaded hydrogels were slower with a 6.2 ± 8.9 % and 56.6 ± 4.5 % release compared to 60.9 ± 14.6 % and 76.8 ± 19.7 % release from free DOX loaded hydrogel since DOX release was controlled by PCL microspheres. When interacted with human breast cancer cell line (MCF-7), DOX-PCL-MSs were able to disrupt cell and spheroid morphology after 7 days at concentrations as low as 12 μg/mL loaded DOX. In vitro cytotoxicity study has showed that, DOX-PCL-MSs loaded hydrogel was able to decrease MCF-7 viability after 7 days of incubation with controlled release of DOX. While free DOX releasing hydrogel has lost cytotoxic activity even after 4 days of incubation. Furthermore, ability of PVA/PUL hydrogel to support L929 cell attachment was shown in the study, suggesting hydrogels potential for promoting tissue regeneration after anti-cancer treatment. The study reveals that PVA/PUL hybrid hydrogels loaded with DOX-PCL-MSs has impactful potential in post-surgical treatment of breast cancer.

Human Induced Pluripotent Spheroids' Growth Is Driven by Viscoelastic Properties and Macrostructure of 3D Hydrogel Environment.

Stem cells, particularly human iPSCs, constitute a powerful tool for tissue engineering, notably through spheroid and organoid models. While the sensitivity of stem cells to the viscoelastic properties of their direct microenvironment is well-described, stem cell differentiation still relies on biochemical factors. Our aim is to investigate the role of the viscoelastic properties of hiPSC spheroids' direct environment on their fate. To ensure that cell growth is driven only by mechanical interaction, bioprintable alginate-gelatin hydrogels with significantly different viscoelastic properties were utilized in differentiation factor-free culture medium. Alginate-gelatin hydrogels of varying concentrations were developed to provide 3D environments of significantly different mechanical properties, ranging from 1 to 100 kPa, while allowing printability. hiPSC spheroids from two different cell lines were prepared by aggregation (⌀ = 100 µm, n > 1 × 104), included and cultured in the different hydrogels for 14 days. While spheroids within dense hydrogels exhibited limited growth, irrespective of formulation, porous hydrogels prepared with a liquid-liquid emulsion method displayed significant variations of spheroid morphology and growth as a function of hydrogel mechanical properties. Transversal culture (adjacent spheroids-laden alginate-gelatin hydrogels) clearly confirmed the separate effect of each hydrogel environment on hiPSC spheroid behavior. This study is the first to demonstrate that a mechanically modulated microenvironment induces diverse hiPSC spheroid behavior without the influence of other factors. It allows one to envision the combination of multiple formulations to create a complex object, where the fate of hiPSCs will be independently controlled by their direct microenvironment.