Monomeric State In Solution Research Articles

Oligomeric State of β-Coronavirus Non-Structural Protein 10 Stimulators Studied by Small Angle X-ray Scattering.

The β-coronavirus family, encompassing Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), Severe Acute Respiratory Syndrome Coronavirus (SARS), and Middle East Respiratory Syndrome Coronavirus (MERS), has triggered pandemics within the last two decades. With the possibility of future pandemics, studying the coronavirus family members is necessary to improve knowledge and treatment. These viruses possess 16 non-structural proteins, many of which play crucial roles in viral replication and in other vital functions. One such vital protein is non-structural protein 10 (nsp10), acting as a pivotal stimulator of nsp14 and nsp16, thereby influencing RNA proofreading and viral RNA cap formation. Studying nsp10 of pathogenic coronaviruses is central to unraveling its multifunctional roles. Our study involves the biochemical and biophysical characterisation of full-length nsp10 from MERS, SARS and SARS-CoV-2. To elucidate their oligomeric state, we employed a combination of Multi-detection Size exclusion chromatography (Multi-detection SEC) with multi-angle static light scattering (MALS) and small angle X-ray scattering (SAXS) techniques. Our findings reveal that full-length nsp10s primarily exist as monomers in solution, while truncated versions tend to oligomerise. SAXS experiments reveal a globular shape for nsp10, a trait conserved in all three coronaviruses, although MERS nsp10, diverges most from SARS and SARS-CoV-2 nsp10s. In summary, unbound nsp10 proteins from SARS, MERS, and SARS-CoV-2 exhibit a globular and predominantly monomeric state in solution.

Structural studies of the nucleus-like assembly of jumbo bacteriophage 201φ2-1.

The jumbo phages encode proteins that assemble to form a nucleus-like compartment in infected cells. Here we report the cryo-EM structure and biochemistry characterization of gp105, a protein that is encoded by the jumbo phage 201φ2-1 and is involved in the formation of the nucleus-like compartment in phage 201φ2-1 infected Pseudomonas chlororaphis. We found that, although most gp105 molecules are in the monomeric state in solution, a small portion of gp105 assemble to form large sheet-like assemblies and small cube-like particles. Reconstruction of the cube-like particles showed that the particle consists of six flat head-to-tail tetramers arranged into an octahedral cube. The four molecules at the contact interface of two head-to-tail tetramers are 2-fold symmetry-related and constitute a concave tetramer. Further reconstructions without applying symmetry showed that molecules in the particles around the distal ends of a 3-fold axis are highly dynamic and have the tendency to open up the assembly. Local classifications and refinements of the concave tetramers in the cube-like particle resulted in a map of the concave tetramer at a resolution of 4.09 Å. Structural analysis of the concave tetramer indicates that the N and C terminal fragments of gp105 are important for mediating the intermolecular interactions, which was further confirmed by mutagenesis studies. Biochemistry assays showed that, in solution, the cube-like particles of gp105 are liable to either disassemble to form the monomers or recruit more molecules to form the high molecular weight lattice-like assembly. We also found that monomeric gp105s can self-assemble to form large sheet-like assemblies in vitro, and the assembly of gp105 in vitro is a reversible dynamic process and temperature-dependent. Taken together, our results revealed the dynamic assembly of gp105, which helps to understand the development and function of the nucleus-like compartment assembled by phage-encoded proteins.

Structure elucidation of the elusive Enzyme I monomer reveals the molecular mechanisms linking oligomerization and enzymatic activity

Enzyme I (EI) is a phosphotransferase enzyme responsible for converting phosphoenolpyruvate (PEP) into pyruvate. This reaction initiates a five-step phosphorylation cascade in the bacterial phosphotransferase (PTS) transduction pathway. Under physiological conditions, EI exists in an equilibrium between a functional dimer and an inactive monomer. The monomer-dimer equilibrium is a crucial factor regulating EI activity and the phosphorylation state of the overall PTS. Experimental studies of EI's monomeric state have yet been hampered by the dimer's high thermodynamic stability, which prevents its characterization by standard structural techniques. In this study, we modified the dimerization domain of EI (EIC) by mutating three amino acids involved in the formation of intersubunit salt bridges. The engineered variant forms an active dimer in solution that can bind and hydrolyze PEP. Using hydrostatic pressure as an additional perturbation, we were then able to study the complete dissociation of the variant from 1 bar to 2.5 kbar in the absence and the presence of EI natural ligands. Backbone residual dipolar couplings collected under high-pressure conditions allowed us to determine the conformational ensemble of the isolated EIC monomeric state in solution. Our calculations reveal that three catalytic loops near the dimerization interface become unstructured upon monomerization, preventing the monomeric enzyme from binding its natural substrate. This study provides an atomic-level characterization of EI's monomeric state and highlights the role of the catalytic loops as allosteric connectors controlling both the activity and oligomerization of the enzyme.

Functional and structural characterization of an α-ʟ-arabinofuranosidase from Thermothielavioides terrestris and its exquisite domain-swapped β-propeller fold crystal packing

The fungus Thermothielavioides terrestris plays an important role in the global carbon cycle with enzymes capable of degrading polysaccharides from biomass, therefore an attractive source of proteins to be investigated and understood. From cloning to a three-dimensional structure, we foster a deeper characterization of an α-ʟ-arabinofuranosidase, a glycoside hydrolase from the family 62 (TtAbf62), responsible to release arabinofuranose from non-reducing ends of polysaccharides. TtAbf62 was tested with synthetic (pNP-Araf) and polymeric substrates (arabinan and arabinoxylan), showing optimal temperature and pH (for pNP-Araf) of 30 °C and 4.5–5.0, respectively. Kinetic parameters revealed different specific activity for the three substrates, with a higher affinity for pNP-Araf (KM: 4 ± 1 mM). The hydrolyzing activity of TtAbf62 on sugarcane bagasse suggests high efficiency in the decomposition of arabinoxylan, abundant hemicellulose presented in the sugarcane cell wall. The crystal packing of TtAbf62 reveals an exquisite domain swapping, located at the supramolecular arrangement through a disulfide bond. All crystallographic behaviors go against its monomeric state in solution, indicating a crystal-induced artifact. Structural information will form the basis for further studies aiming the development of optimized enzymatic properties to be used in biotechnological applications.

Structural insight into the carboxylesterase BioH from Klebsiella pneumoniae

The BioH carboxylesterase which is a typical α/β-hydrolase enzyme involved in biotin synthetic pathway in most bacteria. BioH acts as a gatekeeper and blocks the further elongation of its substrate. In the pathogen Klebsiella pneumoniae, BioH plays a critical role in the biosynthesis of biotin. To better understand the molecular function of BioH, we determined the crystal structure of BioH from K. pneumoniae at 2.26 Å resolution using X-ray crystallography. The structure of KpBioH consists of an α-β-α sandwich domain and a cap domain. B-factor analysis revealed that the α-β-α sandwich domain is a rigid structure, while the loops in the cap domain shows the structural flexibility. The active site of KpBioH contains the catalytic triad (Ser82-Asp207-His235) on the interface of the α-β-α sandwich domain, which is surrounded by the cap domain. Size exclusion chromatography shows that KpBioH prefers the monomeric state in solution, whereas two-fold symmetric dimeric formation of KpBioH was observed in the asymmetric unit, the conserved Cys31-based disulfide bonds can maintain the irreversible dimeric formation of KpBioH. Our study provides important structural insight for understanding the molecular mechanisms of KpBioH and its homologous proteins.

Biochemical characterization and low-resolution SAXS structure of two-domain endoglucanase BlCel9 from Bacillus licheniformis.

Lignocellulose feedstock constitutes the most abundant carbon source in the biosphere; however, its recalcitrance remains a challenge for microbial conversion into biofuel and bioproducts. Bacillus licheniformis is a microbial mesophilic bacterium capable of secreting a large number of glycoside hydrolase (GH) enzymes, including a glycoside hydrolase from GH family 9 (BlCel9). Here, we conducted biochemical and biophysical studies of recombinant BlCel9, and its low-resolution molecular shape was retrieved from small angle X-ray scattering (SAXS) data. BlCel9 is an endoglucanase exhibiting maximum catalytic efficiency at pH7.0 and 60°C. Furthermore, it retains 80% of catalytic activity within a broad range of pH values (5.5-8.5) and temperatures (up to 50°C) for extended periods of time (over 48h). It exhibits the highest hydrolytic activity against phosphoric acid swollen cellulose (PASC), followed by bacterial cellulose (BC), filter paper (FP), and to a lesser extent carboxymethylcellulose (CMC). The HPAEC-PAD analysis of the hydrolytic products demonstrated that the end product of the enzymatic hydrolysis is primarily cellobiose, and also small amounts of glucose, cellotriose, and cellotetraose are produced. SAXS data analysis revealed that the enzyme adopts a monomeric state in solution and has a molecular mass of 65.8kDa as estimated from SAXS data. The BlCel9 has an elongated shape composed of an N-terminal family 3 carbohydrate-binding module (CBM3c) and a C-terminal GH9 catalytic domain joined together by 20 amino acid residue long linker peptides. The domains are closely juxtaposed in an extended conformation and form a relatively rigid structure in solution, indicating that the interactions between the CBM3c and GH9 catalytic domains might play a key role in cooperative cellulose biomass recognition and hydrolysis.

Crystal structure of the inactive state of the receiver domain of Spo0A from Paenisporosarcina sp. TG-14, a psychrophilic bacterium isolated from an Antarctic glacier.

The two-component phosphorelay system is the most prevalent mechanism for sensing and transducing environmental signals in bacteria. Spore formation, which relies on the two-component phosphorelay system, enables the long-term survival of the glacial bacterium Paenisporosarcina sp. TG-14 in the extreme cold environment. Spo0A is a key response regulator of the phosphorelay system in the early stage of spore formation. The protein is composed of a regulatory N-terminal phospho-receiver domain and a DNA-binding C-terminal activator domain. We solved the three-dimensional structure of the unphosphorylated (inactive) form of the receiver domain of Spo0A (PaSpo0A-R) from Paenisporosarcina sp. TG-14. A structural comparison with phosphorylated (active form) Spo0A from Bacillus stearothermophilus (BsSpo0A) showed minor notable differences. A molecular dynamics study of a model of the active form and the crystal structures revealed significant differences in the α4 helix and the preceding loop region where phosphorylation occurs. Although an oligomerization study of PaSpo0A-R by analytical ultracentrifugation (AUC) has shown that the protein is in a monomeric state in solution, both crosslinking and crystal-packing analyses indicate the possibility of weak dimer formation by a previously undocumented mechanism. Collectively, these observations provide insight into the mechanism of phosphorylation-dependent activation unique to Spo0A.

Mutagenesis of mNeptune Red-Shifts Emission Spectrum to 681-685 nm.

GFP-like fluorescent proteins with diverse emission wavelengths have been developed through mutagenesis, offering many possible choices in cellular and tissue imaging, such as multi-targets imaging, deep tissue imaging that require longer emission wavelength. Here, we utilized a combined approach of random mutation and structure-based rational design to develop new NIR fluorescent proteins on the basis of a far-red fluorescent protein, mNeptune (Ex/Em: 600/650 nm). We created a number of new monomeric NIR fluorescent proteins with the emission range of 681–685 nm, which exhibit the largest Stocks shifts (77–80 nm) compared to other fluorescent proteins. Among them, mNeptune681 and mNeptune684 exhibit more than 30 nm redshift in emission relative to mNeptune, owing to the major role of the extensive hydrogen-bond network around the chromophore and contributions of individual mutations to the observed redshift. Furthermore, the two variants still maintain monomeric state in solution, which is a trait crucial for their use as protein tags. In conclusion, our results suggest that there is untapped potential for developing fluorescent proteins with desired properties.

Impact of Quaternary Structure upon Bacterial Cytochrome c Peroxidases: Does Homodimerization Matter?

All known active forms of diheme bacterial cytochrome c peroxidase (bCcP) enzymes are described by a homodimeric state. Further, the majority of bCcPs reported display activity only when the high-potential electron transfer heme of the protein (Fe(H)) is reduced to the ferrous oxidation state. Reduction of Fe(H) results in a set of conformational changes allowing for the low-potential peroxidatic heme (Fe(L)) to adopt a high-spin, five-coordinate state that is capable of binding substrate. Here we examine the impact of dimerization upon the activity of the Shewanella oneidensis (So) bCcP by the preparation of single charge-reversal mutants at the dimer interface and use the resulting constructs to illustrate why dimerization is likely a requirement for activity in bCcPs. The E258K mutant is found to form a monomeric state in solution as characterized by size exclusion chromatography and analytical ultracentrifugation analyses. The resulting E258K monomer has an unfolding stability comparable to that of wild-type So bCcP and an activity that is only slightly diminished (k(cat)/K(m) = 23 × 10(6) M(-1) s(-1)). Spectroscopic and potentiometric analyses reveal that while the thermodynamic stability of the activated form of the enzyme is unchanged (characterized by the E(m) value of the Fe(H)(II)/Fe(H)(III) couple), the kinetic stability of the activated form of the enzyme has been greatly diminished upon generation of the monomer. Together, these data suggest a model in which dimerization of bCcP enzymes is required to stabilize the lifetime of the activated form of the enzyme against reoxidation of Fe(H) and deactivation of Fe(L).

Crystallographic and NMR Evidence for Flexibility in Oligosaccharyltransferases and Its Catalytic Significance

Oligosaccharyltransferase (OST) is a membrane-bound enzyme that catalyzes the transfer of an oligosaccharide to an asparagine residue in glycoproteins. It possesses a binding pocket that recognizes Ser and Thr residues at the+2 position in theN-glycosylation consensus, Asn-X-Ser/Thr. We determined the crystal structures of the C-terminal globular domains of the catalytic subunits of two archaeal OSTs. A comparison with previously determined structures identified a segment with remarkable conformational plasticity, induced by crystal contact effects. We characterized its dynamic properties in solution by (15)N NMR relaxation analyses. Intriguingly, the mobile region contains the+2 Ser/Thr-binding pocket. In agreement, the flexibility restriction forced by an engineered disulfide crosslink abolished the enzymatic activity, and its cleavage fully restored activity. These results suggest the necessity of multiple conformational states in the reaction. The dynamic nature of the Ser/Thr pocket could facilitate the efficient scanning of N-glycosylation sequons along nascent polypeptide chains.

Function and Dysfunction of α-Synuclein: Probing Conformational Changes and Aggregation by Single Molecule Fluorescence

The aggregation and deposition of the neuronal protein α-synuclein in the substantia nigra region of the brain is a key pathological feature of Parkinson's disease. α-Synuclein assembles from a monomeric state in solution, which lacks stable secondary and tertiary contacts, into highly structured fibrillar aggregates through a pathway which involves the population of multiple oligomeric species over a range of time scales. These features make α-synuclein well suited for study with single-molecule techniques, which are particularly useful for characterizing dynamic, heterogeneous samples. Here, we review the current literature featuring single-molecule fluorescence studies of α-synuclein and discuss how these studies have contributed to our understanding of both its function and its role in disease.

Structural Characterization of Metalloprotease Vibriolysin of Cholera Pathogen Vibrio cholerae

Vibriolysin is among several zinc metalloproteases produced by Vibrio cholerae. It is involved in the molecular pathogenicity of cholera. Here, we cloned and expressed full-length vibriolysin gene from V. cholerae. Electrophoretic and mass spectrometric data showed that the N-terminal pro-peptide was removed from pro-vibriolysin generating a 45-kDa segment containing the metalloprotease plus the C-terminal domains, and the 35 kDa metalloprotease. The 35 kDa metalloprotease segment of vibriolysin was purified to homogeneity using ion-exchange and gel filtration chromatography. Circular dichroism (CD) analysis of vibriolysin indicated α+β secondary structure, similar to other closely related metalloproteases of known structure. Positive dichroic absorption maxima in near-UV CD spectrum provided evidence for bound metal atom(s). Dynamic Light Scattering (DLS) measurements at different pHs were also performed to establish the aggregational properties of purified vibriolysin in solution. The results of DLS studies revealed that vibriolysin exists as a homomer with a hydrodynamic radius of 56.7 nm ± 2% under physiological conditions and remains catalytic when BSA was used as a protein substrate. While, extreme acidic (pH 3.5-5.4; R(H) = 65-239 nm) and alkaline (pH 8.5-9.4; R(H) = 57-72 nm) buffering conditions induced further aggregation of vibriolysin, without any trace of the monomeric state in solution.

Solution structure of the major (Spy0128) and minor (Spy0125 and Spy0130) pili subunits from Streptococcus pyogenes

Adhesion of the serotype M1 Streptococcus pyogenes strain SF370 to human tonsil explants and cultured keratinocytes requires extended polymeric surface structures called pili. In this important human pathogen, pili are assembled from three protein subunits: Spy0125, Spy0128 and Spy0130 through the action of sortase enzymes. For this study, the structural properties of these pili proteins have been investigated in solution. Spy0125 and Spy0128 display characteristics of globular, folded proteins. Circular dichroism suggests a largely beta-sheet composition for Spy0128 and Spy0125; Spy0130 appears to contain little secondary structure. Each of the proteins adopts a monodisperse, monomeric state in solution as assessed by analytical ultracentrifugation. Further, small-angle X-ray scattering curves for Spy0125, Spy0128 and Spy0130 suggest each protein adopts an elongated shape, likely comprised of two domains, with similar maximal dimensions. Based on the scattering data, dummy atom models of each of the pili subunits have been reconstructed ab initio. This study provides the first insights into the structure of Streptococcus pyogenes minor pili subunits, and possible implications for protein function are discussed.

Adsorption and desorption of monomeric Bt ( Bacillus thuringiensis) Cry1Aa toxin on montmorillonite and kaolinite

Genetically modified crops, which produce pesticidal proteins from Bacillus thuringiensis, release the toxins into soils through root exudates and upon decomposition of crop residues. Although the phenomena of gene transfer and emergence of resistance have been well documented, the fate of these toxins in soil has not yet been clearly elucidated. The aim of this study was to elucidate the adsorption and the desorbability of the Cry1Aa Bt insecticidal protein in contact with two sodium-saturated clays: montmorillonite and kaolinite. Because the toxin is released into soil in small quantities, it was assumed that it will be in a monomeric state in solution until it oligomerized on cell membranes. The originality of this study was to focus on the monomeric form of the protein. Specific sample conditions were required to avoid polymerisation. A pH above 6.5 and an ionic strength of at least 150 mM (NaCl) were necessary to keep the protein in solution and in a monomeric state. The adsorption isotherms obtained were of the L-type (low affinity) for both clays and fitted the Langmuir equation. The adsorption maximum of the toxin, calculated by the Langmuir nonlinear regression, decreased with increasing pH from 6.5, which was close to the isoelectric point, to 9. At pH 6.5, the calculated adsorption was 1.7 g g −1 on montmorillonite and 0.04 g g −1 on kaolinite. Desorbability measurements showed that a small fraction of toxin could be desorbed by water (up to 14%) and more by alkaline pH buffers (36 ± 7%), indicating that it was not tightly bound. Numerous surfactants were evaluated and the toxin was found to be easily desorbed from both clays when using zwitterionic and nonionic surfactants such as CHAPS, Triton-X-100, and Tween 20. This finding has important implications for the optimization of detection methods for Bt toxin in soil.

Biophysical analysis of the EPEC translocated intimin receptor-binding domain

Enteropathogenic Escherichia coli (EPEC) are Gram (−) bacteria responsible for widespread illness in the form of diarrhea. EPEC cells attach to the intestinal epithelium using a Type III secretion system common to many Gram (−) bacteria. The translocated intimin receptor (TIR) is the first protein secreted through the EPEC secretion complex, and is absolutely required for pathogenesis. It inserts into the intestinal epithelium, serving as an anchor responsible for the attachment of EPEC to the host epithelial cell. Intimin is a transmembrane protein displayed on the EPEC cell surface with an extracellular domain that binds TIR. Observation of a TIR–TIR dimer in the X-ray co-crystal structure of the extracellular domains of intimin and TIR raised the question of how these protein domains interact and function in solution. Herein we report that the extracellular domain of TIR exists in a folded and active monomeric state in solution, as confirmed by analytical ultracentrifugation, analytical size-exclusion HPLC, isothermal titration calorimetry, and surface plasmon resonance.

Interactions between Bacterial Flagellar Axial Proteins in Their Monomeric State in Solution

The axial structure of the bacterial flagellum is composed of many different proteins, such as hook protein and flagellin, and each protein forms a short or long axial segment one after another in a well-defined order along the axis. Under physiological conditions, most of these proteins are stable in the monomeric state in solution, and spontaneous polymerization appears to be suppressed, as demonstrated clearly for flagellin, probably to avoid undesirable self-assembly in the cytoplasmic space. However, no systematic studies of the possible associations between monomeric axial proteins in solution have been carried out. We therefore studied self and cross-association between hook protein, flagellin and three hook-associated proteins, HAP1, HAP2 and HAP3, in all possible pairs, by gel-filtration and analytical centrifugation, and found interactions in the following two cases only. Flagellin facilitated HAP3 aggregation into β-amyloid-like filaments, but without stable binding between the two. Addition of HAP3 to HAP2 resulted in disassembly of preformed HAP2 decamers and formation of stable HAP2–HAP3 heterodimers. HAP2 missing either of its disordered terminal regions did not form the heterodimer, whereas HAP3 missing either of its disordered terminal regions showed stable heterodimer formation. This polarity in the heterodimer interactions suggests that the interactions between HAP2 and HAP3 in solution are basically the same as those in the flagellar axial structure. We discuss these results in relation to the assembly mechanism of the flagellum.

Spectroscopic study of trypsin, heat and Triton X-100-induced denaturation of the chlorophyll-binding protein CP43

Trypsin-, heat- and Triton X-100-induced denaturation of CP43, the core antenna complex of photosystem II purified from spinach, has been investigated using absorption, fluorescence and circular dichroism spectroscopy. Triton X-100 was found to bring about considerable dissolution of pigments from the protein to the monomeric state in solution and destruction of the interactions among the chlorophyll, carotene and protein. Heat induced significant unfolding of the protein secondary structure and loss of excitonic interactions of the pigments, but no apparent dissolution of the pigments from CP43. Trypsin caused structural changes in the extrinsic part of the protein but no change of the native state of the pigments. Trypsin, heat and Triton X-100 treatments increased the light sensitivity of chlorophyll in CP43 to different extents. The results suggest that the protein and β-carotene can protect the chlorophyll from light-induced destruction in CP43.