Monochromated Electron Energy-loss Spectroscopy Research Articles

Automated Bandgap Measurements in Optoelectronic Devices by Monochromated Electron Energy-Loss Spectroscopy

Automated Bandgap Measurements in Optoelectronic Devices by Monochromated Electron Energy-Loss Spectroscopy

Unveiling Variations in Electronic and Atomic Structures Due to Nanoscale Wurtzite and Zinc Blende Phase Separation in GaAs Nanowires.

Phase separation is an intriguing phenomenon often found in III-V nanostructures, but its effect on the atomic and electronic structures of III-V nanomaterials is still not fully understood. Here we study the variations in atomic arrangement and band structure due to the coexistence of wurtzite (WZ) and zinc blende (ZB) phases in single GaAs nanowires by using scanning transmission electron microscopy and monochromated electron energy loss spectroscopy. The WZ lattice distances are found to be larger (by ∼1%), along both the nanowire length direction and the perpendicular direction, than the ZB lattice. The band gap of the WZ phase is ∼20 meV smaller than that of the ZB phase. A shift of ∼70 meV in the conduction band edge between the two phases is also found. The direct and local measurements in single GaAs nanowires reveal important effects of phase separation on the properties of individual III-V nanostructures.

Nonequivalent Atomic Vibrations at Interfaces in a Polar Superlattice.

In heterostructures made from polar materials, e.g., AlN-GaN-AlN, the nonequivalence of the two interfaces is long recognized as a critical aspect of their electronic properties; in that, they host different 2D carrier gases. Interfaces play an important role in the vibrational properties of materials, where interface states enhance thermal conductivity and can generate unique infrared-optical activity. The nonequivalence of the corresponding interface atomic vibrations, however, is not investigated so far due to a lack of experimental techniques with both high spatial and high spectral resolution. Herein, the nonequivalence of AlN-(Al0.65Ga0.35)N and (Al0.65Ga0.35)N-AlN interface vibrations is experimentally demonstrated using monochromated electron energy-loss spectroscopy in the scanning transmission electron microscope (STEM-EELS) and density-functional-theory (DFT) calculations are employed to gain insights in the physical origins of observations. It is demonstrated that STEM-EELS possesses sensitivity to the displacement vector of the vibrational modes as well as the frequency, which is as critical to understanding vibrations as polarization in optical spectroscopies. The combination enables direct mapping of the nonequivalent interface phonons between materials with different phonon polarizations. The results demonstrate the capacity to carefully assess the vibrational properties of complex heterostructures where interface states dominate the functional properties.

High-Efficiency Coupling of Free Electrons to Sub-λ3 Modal Volume, High-Q Photonic Cavities.

We report on the design, realization, and experimental investigation by spatially resolved monochromated electron energy loss spectroscopy (EELS) of high-quality-factor cavities with modal volumes smaller than λ3, with λ being the free-space wavelength of light. The cavities are based on a slot defect in a 2D photonic crystal slab made up of silicon. They are optimized for high coupling of electrons accelerated to 100 kV to quasi-transverse electrical modes polarized along the slot direction. We studied the cavities in two geometries and took advantage of the deep sub-optical wavelength spatial resolution of the electron microscope and high spectral resolution of the monochromator to comprehensively describe the optical excitations of the slab. The first geometry, for which the cavities have been designed, corresponds to an electron beam traveling along the slot direction. The second consists of the electron beam traveling perpendicular to the slab. In both cases, a large series of modes is identified. The dielectric slot mode energies are measured to be in the 0.8-0.85 eV range, as per design, and surrounded by two bands of dielectric and air modes of the photonic structure. The dielectric even slot modes, to which the cavity mode belongs, are highly coupled to the electrons with up to 3.2% probability of creating a slot photon per incident electron. Although the experimental spectral resolution (around 30 meV) alone does not allow to disentangle cavity photons from other slot photons, the excellent agreement between the experiments and finite-difference time-domain simulations allows us to deduce that among the photons created in the slot, around 30% are stored in the cavity mode. A systematic study of the energy and coupling strength as a function of the photonic band gap parameters permits us to foresee an increase of coupling strength by fine-tuning phase-matching. Our work demonstrates free electron coupling to high-quality-factor cavities with low mode densities and sub-λ3 modal volumes, making it an excellent candidate for applications such as quantum nano-optics with free electrons.

Electronic structure along Sm[formula omitted]Co[formula omitted]Ge[formula omitted] twin boundaries

Ln2Co3Ge5 (Ln = lanthanide) intermetallics possess intriguing electronic and magnetic properties. The compound Sm2Co3Ge5 exhibits antiferromagnetic ordering coupled with a magnetic moment that exceeds the theoretical moment of trivalent Sm suggesting a magnetic contribution from Co. Twinning is observed in Sn flux-grown monoclinic Sm2Co3Ge5 along (100) planes. While the influence of twin boundaries on superconducting oxides and 2D-materials is well-studied, its effects on bulk lanthanide-based intermetallics are rarely explored. Using monochromated electron energy-loss spectroscopy (EELS) and high-resolution transmission electron microscopy (TEM), we investigate the impact of twin domains on the local strain and electronic structure of Sm2Co3Ge5. The boundaries between twinned domains primarily exhibit shear strain and have a constant oxidation state, but fine structure emerges in the Co L2,3 edges at twin boundaries, indicative of 3d-electron hybridization and occupation of states not present in bulk grain spectra. These findings provide insights into tuning the bulk properties of lanthanide-transition metal systems with complex magnetism.

Local defect and mid-gap state analysis of GaN using monochromated EELS combined with nanodiffraction and atomic-resolution imaging

Defects in semiconductor materials significantly impact their inherent properties, making the evaluation of local defects and their energy levels crucial for controlling device performance. With advancements in monochromators, electron energy loss spectroscopy (EELS) combined with scanning transmission electron microscopy (STEM) has emerged as a promising approach for assessing crystal and band structures of semiconductor materials at the nanoscale. However, there is limited experimental research investigating the relationship between actual defective structures in local regions and mid-gap states. In this study, we conducted high-energy resolution EELS (HR-EELS) measurements with an energy resolution of less than 100 meV to detect the mid-gap states of GaN. Various defects were intentionally induced through Ga-ion implantation, and the defect concentration varied in the depth direction. To understand the origin of the mid-gap states, we performed 4D-STEM analysis and atomic-resolution STEM observations. The HR-EELS measurements provided insights into the depth-dependent valence-loss spectra, revealing that the intensities corresponding to mid-gap states gradually increased toward the surface, whereas the slope at the onsets corresponding to interband transition decreased. Furthermore, local structural analysis unveiled the presence of structural disorder and defective structures, indicating the existence of extended defects such as stacking faults and domain boundaries. Observably, these defective structures were abundant near the surface and less pronounced in deeper regions. Based on these experimental findings, we concluded that the variations in valence-loss spectra can be utilized to qualitatively evaluate the crystal imperfections at the nanoscale.

Atomic-Resolution Mapping of Localized Phonon Modes at Grain Boundaries.

Phonon scattering at grain boundaries (GBs) is significant in controlling the nanoscale device thermal conductivity. However, GBs could also act as waveguides for selected modes. To measure localized GB phonon modes, milli-electron volt (meV) energy resolution is needed with subnanometer spatial resolution. Using monochromated electron energy loss spectroscopy (EELS) in the scanning transmission electron microscope (STEM) we have mapped the 60 meV optic mode across GBs in silicon at atomic resolution and compared it to calculated phonon densities of states (DOS). The intensity is strongly reduced at GBs characterized by the presence of 5- and 7-fold rings where bond angles differ from the bulk. The excellent agreement between theory and experiment strongly supports the existence of localized phonon modes and thus of GBs acting as waveguides.

In Situ and Emerging Transmission Electron Microscopy for Catalysis Research

Catalysts are the primary facilitator in many dynamic processes. Therefore, a thorough understanding of these processes has vast implications for a myriad of energy systems. The scanning/transmission electron microscope (S/TEM) is a powerful tool not only for atomic-scale characterization but also in situ catalytic experimentation. Techniques such as liquid and gas phase electron microscopy allow the observation of catalysts in an environment conducive to catalytic reactions. Correlated algorithms can greatly improve microscopy data processing and expand multidimensional data handling. Furthermore, new techniques including 4D-STEM, atomic electron tomography, cryogenic electron microscopy, and monochromated electron energy loss spectroscopy (EELS) push the boundaries of our comprehension of catalyst behavior. In this review, we discuss the existing and emergent techniques for observing catalysts using S/TEM. Challenges and opportunities highlighted aim to inspire and accelerate the use of electron microscopy to further investigate the complex interplay of catalytic systems.

Chemical Synthesis of La0.75Sr0.25CrO3 Thin Films for p-Type Transparent Conducting Electrodes.

The imperative need for highly performant and stable p-type transparent electrodes based on abundant metals is stimulating the research on perovskite oxide thin films. Moreover, exploring the preparation of these materials with the use of cost-efficient and scalable solution-based techniques is a promising approach to extract their full potential. Herein, we present the design of a chemical route, based on metal nitrate precursors, for the preparation of pure phase La0.75Sr0.25CrO3 (LSCO) thin films to be used as a p-type transparent conductive electrode. Different solution chemistries have been evaluated to ultimately obtain dense, epitaxial, and almost relaxed LSCO films. Optical characterization of the optimized LSCO films reveals promising high transparency with ∼67% transmittance while room temperature resistivity values are 1.4 Ω·cm. It is suggested that the presence of structural defects, i.e., antiphase boundaries and misfit dislocations, affects the electrical behavior of LSCO films. Monochromated electron energy loss spectroscopy allowed changes in the electronic structure in LSCO films to be determined, revealing the creation of Cr4+ and unoccupied states at the O 2p upon Sr-doping. This work offers a new venue to prepare and further investigate cost-effective functional perovskite oxides with potential to be used as p-type transparent conducting electrodes and be easily integrated in many oxide heterostructures.

Textural, Microstructural and Chemical Characterization of Ferritic Stainless Steel Affected by the Gold Dust Defect

The "gold dust defect" (GDD) appears at the surface of ferritic stainless steels (FSS) and degrades their appearance. Previous research showed that this defect might be related to intergranular corrosion and that the addition of aluminium improves surface quality. However, the nature and origin of this defect are not properly understood yet. In this study, we performed detailed electron backscatter diffraction analyses and advanced monochromated electron energy-loss spectroscopy experiments combined with machine-learning analyses in order to extract a wealth of information on the GDD. Our results show that the GDD leads to strong textural, chemical, and microstructural heterogeneities. In particular, the surface of affected samples presents an α-fibre texture which is characteristic of poorly recrystallised FSS. It is associated with a specific microstructure in which elongated grains are separated from the matrix by cracks. The edges of the cracks are rich in chromium oxides and MnCr2O4 spinel. In addition, the surface of the affected samples presents a heterogeneous passive layer, in contrast with the surface of unaffected samples, which shows a thicker and continuous passive layer. The quality of the passive layer is improved with the addition of aluminium, explaining the better resistance to the GDD.

Strongly Coupled Plasmon and Phonon Polaritons as Seen by Photon and Electron Probes

The ability to control and modify infrared excitations in condensed matter is of both fundamental and applied interest. Here we explore a system supporting low-energy excitations, in particular, mid-infrared localized plasmon modes and phonon polaritons that are tuned to be strongly coupled. We study the coupled modes by using far-field infrared spectroscopy, state-of-the-art monochromated electron energy-loss spectroscopy, numerical simulations, and analytical modeling. We demonstrate that the electron probe facilitates a precise characterization of polaritons constituting the coupled system, and enables an active control over the coupling and the resulting sample response both in frequency and space. Although far-field optical spectra can be substantially different from near-field electron energy-loss spectra, we show that a direct comparison is possible via postprocessing and right positioning of the electron beam. The resulting spectra allow us to evaluate the key parameters of the coupled system, such as the coupling strength, which we demonstrate to be probe independent. Our work establishes a rigorous description of the spectral features observed in light- and localized electron-based spectroscopies, which can be extended to the analysis of analogous optical systems with applications in heat management and electromagnetic field concentration or nanofocusing.

Direct Visualization of Localized Vibrations at Complex Grain Boundaries.

Grain boundaries (GBs) are a prolific microstructural feature that dominates the functionality of a wide class of materials. The functionality at a GB results from the unique atomic arrangements, different from those in the grain, that have driven extensive experimental and theoretical studies correlating atomic-scale GB structures to macroscopic electronic, infrared optical, and thermal properties. In this work, a SrTiO3 GB is examined using atomic-resolution aberration-corrected scanning transmission electron microscopy and ultrahigh-energy-resolution monochromated electron energy-loss spectroscopy, in conjunction with density functional theory. This combination enables the correlation of the GB structure, nonstoichiometry, and chemical bonding with a redistribution of vibrational states within the GB dislocation cores. The new experimental access to localized GB vibrations provides a direct route to quantifying the impact of individual boundaries on macroscopic properties.

Curvature-Induced One-Dimensional Phonon Polaritons at Edges of Folded Boron Nitride Sheets.

Generation and manipulation of phonon polaritons are of paramount importance for understanding the interaction between an electromagnetic field and dielectric materials and furthering their application in mid-infrared optical communication. However, the formation of tunable one-dimensional phonon polaritons has been rarely realized in van der Waals layered structures. Here we report the discovery of curvature-induced phonon polaritons localized at the crease of folded hexagonal boron nitrides (h-BNs) with a few atomic layers using monochromated electron energy-loss spectroscopy. Compared to bulk regions, the creased-localized signals undergo an abnormal blue-shift of 1.4 meV. First-principles calculations reveal that the energy shift arises from the optical phonon hardening in the curled region. Interestingly, the curvature-induced phonon polariton can also be controllably achieved via an electron-beam etching approach. This work opens an avenue of tailoring local electromagnetic response and creating unique phonon polariton modes in van der Waals layered materials for diverse applications.

Emergence of distinct electronic states in epitaxially-fused PbSe quantum dot superlattices

Quantum coupling in arrayed nanostructures can produce novel mesoscale properties such as electronic minibands to improve the performance of optoelectronic devices, including ultra-efficient solar cells and infrared photodetectors. Colloidal PbSe quantum dots (QDs) that self-assemble into epitaxially-fused superlattices (epi-SLs) are predicted to exhibit such collective phenomena. Here, we show the emergence of distinct local electronic states induced by crystalline necks that connect individual PbSe QDs and modulate the bandgap energy across the epi-SL. Multi-probe scanning tunneling spectroscopy shows bandgap modulation from 0.7 eV in the QDs to 1.1 eV at their necks. Complementary monochromated electron energy-loss spectroscopy demonstrates bandgap modulation in spectral mapping, confirming the presence of these distinct energy states from necking. The results show the modification of the electronic structure of a precision-made nanoscale superlattice, which may be leveraged in new optoelectronic applications.

Simultaneous Imaging of Dopants and Free Charge Carriers by Monochromated EELS.

Doping inhomogeneities in solids are not uncommon, but their microscopic observation and understanding are limited due to the lack of bulk-sensitive experimental techniques with high enough spatial and spectral resolution. Here, we demonstrate nanoscale imaging of both dopants and free charge carriers in La-doped BaSnO3 (BLSO) using high-resolution electron energy-loss spectroscopy (EELS). By analyzing high- and low-energy excitations in EELS, we reveal chemical and electronic inhomogeneities within a single BLSO nanocrystal. The inhomogeneous doping leads to distinctive localized infrared surface plasmons, including a previously unobserved plasmon mode that is highly confined between high- and low-doping regions. We further quantify the carrier density, effective mass, and dopant activation percentage by EELS and transport measurements on the bulk single crystals of BLSO. These results not only represent a practical approach for studying heterogeneities in solids and understanding structure-property relationships at the nanoscale, but also demonstrate the possibility of infrared plasmon tuning by leveraging nanoscale doping texture.

Toward laser-induced tuning of plasmonic response in high aspect ratio gold nanostructures

Abstract High aspect-ratio gold nanostructures sustain Fabry–Perot-like surface plasmon responses from infrared to visible light energies. We show that some resonances can be tuned by means of laser irradiation, where low energy modes stay unperturbed. After laser irradiation, gold nanowires’ tips are transformed into nanoparticles of various sizes joint to gold nanowires, producing high aspect-ratio half-dumbbells and dumbbells structures. The plasmonic behaviour of both the nanowires and the newly created nanostructures has been characterised by in-depth monochromated electron energy loss spectroscopy (EELS) developed in a transmission electron microscope (TEM) and state-of-the-art discrete dipole approximation (DDA) calculations. All these analyses serve as experimental proof of the selective tuning (or robustness) of the plasmonic modes of the nanostructures in a specific spectral range, which is of critical interest regarding applications for sensing devices, nano-sources or nanophotonic waveguide, as well as optical remote control.

Sub-nanometer mapping of strain-induced band structure variations in planar nanowire core-shell heterostructures

Strain relaxation mechanisms during epitaxial growth of core-shell nanostructures play a key role in determining their morphologies, crystal structure and properties. To unveil those mechanisms, we perform atomic-scale aberration-corrected scanning transmission electron microscopy studies on planar core-shell ZnSe@ZnTe nanowires on α-Al2O3 substrates. The core morphology affects the shell structure involving plane bending and the formation of low-angle polar boundaries. The origin of this phenomenon and its consequences on the electronic band structure are discussed. We further use monochromated valence electron energy-loss spectroscopy to obtain spatially resolved band-gap maps of the heterostructure with sub-nanometer spatial resolution. A decrease in band-gap energy at highly strained core-shell interfacial regions is found, along with a switch from direct to indirect band-gap. These findings represent an advance in the sub-nanometer-scale understanding of the interplay between structure and electronic properties associated with highly mismatched semiconductor heterostructures, especially with those related to the planar growth of heterostructured nanowire networks.

Nanoscale imaging of phonon dynamics by electron microscopy

Spatially resolved vibrational mapping of nanostructures is indispensable to the development and understanding of thermal nanodevices1, modulation of thermal transport2 and novel nanostructured thermoelectric materials3–5. Through the engineering of complex structures, such as alloys, nanostructures and superlattice interfaces, one can significantly alter the propagation of phonons and suppress material thermal conductivity while maintaining electrical conductivity2. There have been no correlative experiments that spatially track the modulation of phonon properties in and around nanostructures due to spatial resolution limitations of conventional optical phonon detection techniques. Here we demonstrate two-dimensional spatial mapping of phonons in a single silicon–germanium (SiGe) quantum dot (QD) using monochromated electron energy loss spectroscopy in the transmission electron microscope. Tracking the variation of the Si optical mode in and around the QD, we observe the nanoscale modification of the composition-induced red shift. We observe non-equilibrium phonons that only exist near the interface and, furthermore, develop a novel technique to differentially map phonon momenta, providing direct evidence that the interplay between diffuse and specular reflection largely depends on the detailed atomistic structure: a major advancement in the field. Our work unveils the non-equilibrium phonon dynamics at nanoscale interfaces and can be used to study actual nanodevices and aid in the understanding of heat dissipation near nanoscale hotspots, which is crucial for future high-performance nanoelectronics.

Quantum theory of magnon excitation by high energy electron beams

The role of magnon inelastic scattering in high energy electron diffraction of spin unpolarised electron beams, including vortex beams, is investigated theoretically for a Heisenberg ferromagnet. The interaction is between the atomic magnetic dipoles in the specimen and orbital angular momentum (OAM) of the electron beam. Magnon inelastic scattering by vortex beams is allowed despite many atoms along the magnon spin wave experiencing mixed OAM states. The scattering cross-section is however independent of the vortex beam winding number. In the case of planes waves in ferromagnetic iron, the magnon diffuse scattered intensity is significantly smaller than phonons in the energy loss range currently accessible by state-of-the-art monochromated electron energy loss spectroscopy (EELS). Nevertheless, it is shown that the long-range magnetic field of the atomic dipoles has a similar role to dipole scattering in phonon excitation. This means that magnons could, in principle, be detected using aloof beam EELS, where long acquisition times can be realised without any specimen beam damage, an important pre-requisite for detecting the weak magnon signal.

Nanoscale Mapping and Defect‐Assisted Manipulation of Surface Plasmon Resonances in 2D Bi2Te3/Sb2Te3 In‐Plane Heterostructures

AbstractThe Bi2Te3/Sb2Te3 in‐plane heterostructure is reported as a low‐dimensional tunable chalcogenide well suited as plasmonic building block for the visible−UV spectral range. Electron‐driven plasmon excitations of low‐dimensional Bi2Te3/Sb2Te3 are investigated by monochromated electron energy loss spectroscopy spectrum imaging. To resolve the nanoscale spatial distribution of various local plasmonic resonances, singular value decomposition is used to disentangle the spectral data and identify the individual spectral contributions of various corner, edge, and face modes. Furthermore, defect‐plasmon interactions are investigated both for nanoscale intrinsic and thermally induced extrinsic polygonal defects (in situ sublimation). Signature of defect‐induced red shift ranging from a several hundreds of millielectronvolts to a few electronvolts, broadening of various plasmon response, together with selective enhancement and significant variations in their intensity are detected. This study highlights the presence of a heterointerface and identifies defects as physical tuning pathways to modulate the plasmonic response over a broad spectral range. Finally, the experimental observations are compared qualitatively and validated with numerical simulations using the electron‐driven discrete dipole approximation. Low‐dimensional Bi2Te3/Sb2Te3 as a less explored plasmonic system holds great promises as emerging platform for integrated plasmonics. Furthermore, introducing controlled structural defects can open the door for nanoengineering of plasmonic properties in such systems.