Mold Temperature Control Research Articles

APRTC: advanced precise rapid thermal cycling in blow molding by applying fuzzy controller on thermoelectric devices for cooling and heating applications

This study presents an innovative approach to enhance thermal control in the blow molding production process, specifically focusing on achieving rapid and precise temperature regulation. To address the significant time consumption during mold closure, strategically deploying thermoelectric modules (TEMs) arranged according to the mold’s geometry enables meticulous temperature monitoring through integrated thermocouples. The configuration forms a matrix of interconnected TEMs, thermocouples, and controllers, orchestrating precise temperature adjustments across the mold surface. The research integrates fuzzy algorithms to facilitate seamless communication between thermoelectric devices and thermocouples for precise mold temperature control. Simulation of thermoelectric devices using COMSOL Multiphysics and implementation of fuzzy controllers in Matlab, connected through a live-link, enables real-time. I have adjustments and precise control. This integrated approach allows for a comprehensive analysis and optimization of the thermal control system, ensuring effective and adaptive temperature regulation. TEMs, operating as solid-state heat pumps, offer size versatility, adaptability to diverse mold shapes, and maintenance-free operation. Leveraging individual control capabilities significantly enhances heat transfer resolution, enabling precise manipulation of heat flux. Emphasizing the reduction of cooling time and achieving high-gloss surface quality, the study introduces the Advanced Precise Rapid Thermal Cycling in Blow Molding (APRTC) method. APRTC strategically employs TEMs to expedite cooling and elevate temperature determination accuracy, guaranteeing enhanced temperature resolution on the core mold surface. Furthermore, the study optimizes energy utilization through a closed-loop fluid circulation system, harnessing waste energy from other stages. Comparative analysis highlights APRTC's superiority, revealing a remarkable 91%\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$91 \\%$$\\end{document} reduction in temperature differentials during the cooling cycle and an 89%\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$89 \\%$$\\end{document} decrease in the heating stage. These findings underscore APRTC's efficacy in maintaining minimal temperature variations throughout the entire molding process.

Evaluation of a self‐optimizing local mold temperature control for inline warpage reduction of injection molded parts

AbstractDimensional accuracy is a highly important quality criterion for injection molded parts and due to the decreasing tolerance criteria an ongoing issue for mold makers, part designers and manufacturers. Variations in the molding process regarding temperature, pressure and thus the specific volume are leading to inner stress distributions within the part, which ultimately cause warpage. To reduce warpage, a homogenization of the local melt properties, such as the temperature, cooling rate or specific volume is necessary. To be able to manipulate these melt properties locally, a mold with a highly segmented temperature control, consisting of 18 heating ceramics and carbon dioxide expansion chambers was designed. This work seeks to reduce warpage using a newly developed control loop that adjusts target values for the upcoming molding cycle while considering the control error of the previous cycle. The self‐optimizing control loop‐ aiming to homogenize the local mold temperatures over multiple cycles‐ was evaluated in experimental trials. Test specimens were produced, and measured for warpage. Compared to the reference (no control), the warpage of a plate‐shaped geometry was reduced by 10 % with the mold temperature homogenization approach.

Weld Line Strength of Polyamide Fiberglass Composite at Different Processing Parameters in Injection Molding Technique.

This study examines the impact of injection parameters on the weld line strength of the polyamide 6 and 30% fiberglass (PA6 + 30% FG) composite samples. The effects of filling time, packing time, packing pressure, melt temperature, and mold temperature on the ultimate tensile strength (UTS) and the elongation value of the weld line are investigated. The results reveal that the filling time factor has the lowest influence rate. On the contrary, the packing pressure has the most considerable value of UTS standard deviation, indicating that this factor has a high impact rate. The melt temperature factor has the highest elongation standard deviation, pointing out the strong impact of melt temperature on the elongation value. In reverse, the filling time factor has the lowest elongation standard deviation, showing the low impact of this factor on the elongation value. Increasing the mold temperature enhances the elongation value greatly because a higher temperature generates a better connection in the weld line area. Although the UTS value improves modestly when the mold temperature control system is used, the elongation result from the mold temperature parameter is better than expected. The UTS result from all parameters presents a minor deviation; therefore, it is lower than expected. The optimal strength result from artificial neural networks with genetic algorithm optimization is 85.1 MPa, which is higher than the best experiment result of 76.8 MPa. Scanning electron microscopy (SEM) results show that the interface between the fiberglass and the PA matrix has high adherence. The fracture surface is smooth, indicating that the PA6 + 30% FG composite sample has a high fragility level. The findings could help to increase the injection sample's weld line strength by optimizing the injection molding conditions.

Enhancing the Fatigue Strength of the Weld Line in Advanced Polymer Injection Molding: Gas-Assisted Mold Temperature Control for Thermoplastic Polyurethane (TPU) Composites.

This study presents an innovative approach to enhancing weld line strength in advanced polymer injection molding through applying gas-assisted mold temperature control, significantly increasing mold temperature beyond typical values observed in conventional processes. We investigate the effects of various heating times and frequencies on the fatigue strength of Polypropylene (PP) samples and the tensile strength of Acrylonitrile Butadiene Styrene (ABS) composite samples at different Thermoplastic Polyurethane (TPU) percentages and heating times. Using gas-assisted mold heating, mold temperatures exceeding 210 °C are achieved, which represents a significant advancement compared to the standard mold temperatures of less than 100 °C. As a result, the fatigue strength of the PP sample with mold heating at 15 s shows a remarkable increase of up to 5.4 times at 5 Hz compared to the sample without mold temperature control. Moreover, ABS/TPU blends with 15 wt.% TPU exhibit the highest ultimate tensile strength (UTS) value of 36.8 MPa, while blends with 30 wt.% TPU have the lowest UTS value of 21.3 MPa. This advancement demonstrates the potential for improved welding line bonding and fatigue strength in manufacturing. Our findings reveal that increasing the mold temperature before injection results in higher fatigue strength in the weld line, with the TPU percentage having a more significant influence on the mechanical properties of ABS/TPU blends than heating time. The results of this study contribute to a deeper understanding of advanced polymer injection molding and offer valuable insights for process optimization.

Effect of Hot Air Heating on The Cavity Temperature Distribution of Injection Mold

In this paper, the air-assisted mold temperature control (AMTC) is applied for heating the mold in the injection molding process. The simulation is run with the same boundary conditions in the experiment. The results shows that the AMTC can heat the surface mold plate to 171.6 °C. This temperature value is higher than the glass transition temperature of almost thermoplastic materials that used in the injection molding process. With the product thickness values of 0.1 mm, 0.3 mm and 0.5 mm, the heating rates were 6.3 °C/s, 6.39 °C/s and 6.58 °C/s, respectively. The increase in heating rate can be explained by the need for thermal energy to heat up the stamp volume that is inserted in the mold cavity for changing the product thickness. Also, the highest temperature at the top of the stamp which is nearest to the hot air gate, and the temperature is smaller when the area is far from the hot air gate.

High-Precision Thin Wall Bipolar Plates for Fuel Cell Applications via Injection Compression Molding with Dynamic Mold Temperature Control.

In recent years, the demand for polymer compound solutions for the application of bipolar plates in polymer electrolyte membrane fuel cells (PEMFC) has increased continuously due to significant cost and lifetime advantages compared to metallic solutions. The main challenge of the compounds is the high filler content required to ensure sufficient electrical conductivity of the bipolar plates. The associated increase in viscosity and simultaneously increased thermal conductivity limit the conventional injection molding process in terms of achievable flow path length to wall thickness ratios (plate aspect ratio). In order to evaluate the extent to which highly modified electrically conductive polymer material systems can be processed into thin-walled and highly dimensionally stable bipolar plates, an injection compression molding process with dynamic mold temperature control (ICM-DT) has been developed. For this purpose, a compound was prepared from polypropylene (PP) and graphite-flakes. The compound was characterized with respect to the achieved filler content, the electrical conductivity, as well as the pressure- and temperature-dependent solidification range. The ICM-DT experiments were carried out by varying the maximum mold temperature and the compression force. In addition, the process was designed with multiple compression and decompression steps to account for a possible pressure-dependent solidification of the compound. The plates were characterized with respect to the achieved plate aspect ratio and the flow-path-dependent dimensional thickness stability. It was shown that the plate aspect ratio could be increased by up to 125% with the maximum filler content compared to conventional injection molding processes provided in the literature. With the multi-stage ICM-DT process, it was also possible to optimize the thickness dimensional stability with a maximum deviation of 3% over the flow path.

Internal Gas-Assisted Mold Temperature Control for Improving the Filling Ability of Polyamide 6 + 30% Glass Fiber in the Micro-Injection Molding Process.

In micro-injection molding, the plastic filling in the cavity is limited by the frozen layer due to the rapid cooling of the hot melt when it comes into contact with the surface of the cavity at a lower temperature. This problem is more serious with composite materials, which have a higher viscosity than pure materials. Moreover, this issue is also more serious with composite materials that have a higher weight percentage of glass filer. In this article, a pre-heating step with the internal gas heating method was used to heat the cavity surface to a high temperature before the filling step to reduce the frozen layer and to improve the filling ability of the composite material (polyamide 6 + 30% glass fiber) in the micro-injection molding process. To heat the cavity surface, an internal gas-assisted mold temperature control (In-GMTC) system was used with a pulsed cooling system. We assessed different mold insert thicknesses (t) and gaps between the gas gate and the heating surface (G) to achieve rapid mold surface temperature control. The heating process was observed using an infrared camera, and the temperature distribution and the heating rate were analyzed. Thereafter, along with the local temperature control, the In-GMTC was used for the micro-injection molding cycle. The results show that, with a gas temperature of 300 °C and a gas gap of 3.5 mm, the heating rate reached 8.6 °C/s. The In-GMTC was also applied to the micro-injection molding process with a part thickness of 0.2 mm. It was shown that the melt flow length had to reach 24 mm to fill the cavity completely. The results show that the filling ability of the composite material increased from 65.4% to 100% with local heating at the melt inlet area when the gas temperature rose from 200 to 400 °C with a 20 s heating cycle.

Using Gas Counter Pressure and Combined Technologies for Microcellular Injection Molding of Thermoplastic Polyurethane to Achieve High Foaming Qualities and Weight Reduction.

Microcellular injection molding technology (MuCell®) using supercritical fluid (SCF) as a foaming agent offers many advantages, such as material and energy savings, low cycle time, cost-effectiveness, and the dimensional stability of products. MuCell® has attracted great attention for applications in the automotive, packaging, sporting goods, and electrical parts industries. In view of the environmental issues, the shoe industry, particularly for midsole parts, is also seriously considering using physical foaming to replace the chemical foaming process. MuCell® is thus becoming one potential processing candidate. Thermoplastic polyurethane (TPU) is a common material for molding the outsole of shoes because of its outstanding properties such as hardness, abrasion resistance, and elasticity. Although many shoe manufacturers have tried applying Mucell® processes to TPU midsoles, the main problem remaining to be overcome is the non-uniformity of the foaming cell size in the molded midsole. In this study, the MuCell® process combined with gas counter pressure (GCP) technology and dynamic mold temperature control (DMTC) were carried out for TPU molding. The influence of various molding parameters including SCF dosage, injection speed, mold temperature, gas counter pressure, and gas holding time on the foaming cell size and the associated size distribution under a target weight reduction of 60% were investigated in detail. Compared with the conventional MuCell® process, the implementation of GCP technology or DMTC led to significant improvement in foaming cell size reduction and size uniformity. Further improvement could be achieved by the simultaneous combination of GCP with DMT, and the resulting cell density was about fifty times higher. The successful possibility for the microcellular injection molding of TPU shoe midsoles is greatly enhanced.

Development and Application of High-gloss Injection Molding Technology

High-gloss injection molding technology is a new green injection molding technology based on dynamic mold temperature control strategy. Compared with the traditional injection molding technology, this technology can obviously improve the surface quality of products, and obtain high quality products with high gloss and no weld line. This paper introduces the principle and technological characteristics of high-gloss injection molding, analyzes the key technology and development of high-gloss injection molding. The key technologies of high-gloss injection molding mainly include high-gloss molding material, high-gloss mold, mold temperature control system, etc. Finally, the existing problems of high-gloss injection molding technology are analyzed, and the breakthrough direction in the field of injection molding in the future is proposed.

Heat Control simulation for variothermal injection moulding moulds using infrared radiation

Mould temperature control has a significant influence on component quality and costs in the plastic injection moulding process. In the case of standard applications isothermal temperature control, in which the mould temperature is maintained at one level, is sufficient. For special applications (e.g. plastic optics; long, thin components; moulding of microstructures) variothermal temperature control using cyclically changing temperatures is beneficial. Therefore, the use of infrared radiators offers advantages in terms of achievable temperatures and investment costs but at low heating rates and efficiency. This paper therefore investigates the possibility of increasing the efficiency of energy input by infrared radiation into metals in particular into aluminium. For this purpose, a simulation model is developed. The numeric models used are validated by means of experiments. A short-wave infrared radiator is investigated, consisting of a tungsten filament in a quartz glass tube. The emitter power is varied from 1200 to 400 W. An aluminium sample with a thickness of 10 mm and a square base with an edge length of 60 mm is investigated. The temperature is measured on the non-irradiated side in the centre of the sample surface and at a distance of 20 mm from it while being irradiated. For the numerical model, a ray tracing simulation is carried out in a first step, the result of which is used as a Neumann boundary condition for a thermal simulation in second step. The model created can serve as a basis for the thermal design of more complex geometries.

Optimization and application of temperature field in rapid heat cycling molding

The rapid thermal cycle molding belongs to the injection mold temperature control system which is helpful to improve moldability and enhance part quality. Despite many available literatures, rapid thermal cycle molding does not represent a well-developed area of practice. The challenge is the uneven distribution of temperature in the cavity after heating, which mostly leads to defects on the surface of the products. In order to obtain uniform cavity surface temperature distribution of rapid thermal cycle molding, the power of heating rods of the electric-heating system in an injection mold was optimized by the response surface method in this work. The proposed optimization result was applied to design a complex rapid thermal cycle molding injection mold with side core-pulling, holes, and different thickness of an automotive part to verify its effectiveness by injection molding. Compared with initial design, the mold temperature uniformity was remarkably improved by 79%. Based on the optimization and injection molding numerical simulation results, the workable molding process to weaken the weld-lines effects on the quality was suggested and the practical injection molded parts were well produced

Prediction and validation of the specific volume for inline warpage control in injection molding

The material-inherent specific volume behavior of polymers is highly important for producing dimensionally accurate injection molded parts since the shrinkage and the shrinkage-induced warpage are attributable to the specific volume behavior. Thereby, the prevalent process parameters melt temperature and cavity pressure significantly influence the prevailing specific volume. Many empirical models describe this pressure-specific volume-temperature (pvT) behavior.To minimize part warpage, a segmented dynamic mold temperature control has been developed which aims to homogenize the specific volume of a platen-shaped geometry. The mold temperature control is thereby controlled by a model predictive control concept, which predicts the local specific volume using an empirical pvT-model. A modified Tait-pvT-model is used for the prediction, which considers the effect of the cooling rate on the specific volume. To achieve homogenization of the local specific volume, the pvT-model is validated regarding its prediction accuracy by comparing the predicted specific volumes with specific volume measurements of molded test specimens using processing points with varying cooling rates. For the predictions of the final specific volumes, two approaches regarding the selection of the cooling rate were used. The results show that the selection of the cooling rate within the modified Tait model has a significant impact on the calculated final specific volume.

The Feasibility of an Internal Gas-Assisted Heating Method for Improving the Melt Filling Ability of Polyamide 6 Thermoplastic Composites in a Thin Wall Injection Molding Process.

In thin wall injection molding, the filling of plastic material into the cavity will be restricted by the frozen layer due to the quick cooling of the hot melt when it contacts with the lower temperature surface of the cavity. This problem is heightened in composite material, which has a higher viscosity than pure plastic. In this paper, to reduce the frozen layer as well as improve the filling ability of polyamide 6 reinforced with 30 wt.% glass fiber (PA6/GF30%) in the thin wall injection molding process, a preheating step with the internal gas heating method was applied to heat the cavity surface to a high temperature, and then, the filling step was commenced. In this study, the filling ability of PA6/GF30% was studied with a melt flow thickness varying from 0.1 to 0.5 mm. To improve the filling ability, the mold temperature control technique was applied. In this study, an internal gas-assisted mold temperature control (In-GMTC) using different levels of mold insert thickness and gas temperatures to achieve rapid mold surface temperature control was established. The heating process was observed using an infrared camera and estimated by the temperature distribution and the heating rate. Then, the In-GMTC was employed to produce a thin product by an injection molding process with the In-GMTC system. The simulation results show that with agas temperature of 300 °C, the cavity surface could be heated under a heating rate that varied from 23.5 to 24.5 °C/s in the first 2 s. Then, the heating rate decreased. After the heating process was completed, the cavity temperature was varied from 83.8 to about 164.5 °C. In-GMTC was also used for the injection molding process with a part thickness that varied from 0.1 to 0.5 mm. The results show that with In-GMTC, the filling ability of composite material clearly increased from 2.8 to 18.6 mm with a flow thickness of 0.1 mm.

Study on External Gas-Assisted Mold Temperature Control with the Assistance of a Flow Focusing Device in the Injection Molding Process.

In the injection molding field, the flow of plastic material is one of the most important issues, especially regarding the ability of melted plastic to fill the thin walls of products. To improve the melt flow length, a high mold temperature was applied with pre-heating of the cavity surface. In this paper, we present our research on the injection molding process with pre-heating by external gas-assisted mold temperature control. After this, we observed an improvement in the melt flow length into thin-walled products due to the high mold temperature during the filling step. In addition, to develop the heating efficiency, a flow focusing device (FFD) was applied and verified. The simulations and experiments were carried out within an air temperature of 400 °C and heating time of 20 s to investigate a flow focusing device to assist with external gas-assisted mold temperature control (Ex-GMTC), with the application of various FFD types for the temperature distribution of the insert plate. The heating process was applied for a simple insert model with dimensions of 50 mm × 50 mm × 2 mm, in order to verify the influence of the FFD geometry on the heating result. After that, Ex-GMTC with the assistance of FFD was carried out for a mold-reading process, and the FFD influence was estimated by the mold heating result and the improvement of the melt flow length using acrylonitrile butadiene styrene (ABS). The results show that the air sprue gap (h) significantly affects the temperature of the insert and an air sprue gap of 3 mm gives the best heating rate, with the highest temperature being 321.2 °C. Likewise, the actual results show that the height of the flow focusing device (V) also influences the temperature of the insert plate and that a 5 mm high FFD gives the best results with a maximum temperature of 332.3 °C. Moreover, the heating efficiency when using FFD is always higher than without FFD. After examining the effect of FFD, its application was considered, in order to improve the melt flow length in injection molding, which increased from 38.6 to 170 mm, while the balance of the melt filling was also clearly improved.

A Statistical Evaluation of the Influence of Different Material and Process Parameters on the Heat Transfer Coefficient in Gravity Die Casting

Local heat transfer in gravity die casting is of great importance for precision in terms of distortion, mechanical properties, and the quality of the castings due to its effect on solidification. Depending on contact conditions such as liquid melt to solid mold, a gap between mold and component, or contact pressure between casting and mold as a result of shrinkage, there are very large differences in heat transfer. The influences of mold material, mold coating and its influence of aging, mold temperature control, and layout on the heat transfer coefficient (HTC) were investigated experimentally for different contact cases. The experiments were carried out on a rotationally symmetrical experimental setup with modular exchangeable die inserts and cores using an AlSi7Mg0.3 alloy. From the results of the individual test series, the quantitative shares of the above-mentioned influencing variables in the respective effective heat transfer coefficients were determined by means of analysis of variance. From this, the parameters having the most significant influence on the local heat balance were derived.

External Gas-Assisted Mold Temperature Control Improves Weld Line Quality in the Injection Molding Process.

Simulations and experiments were conducted with gas temperatures of 200–400 °C to investigate the impact of external gas-assisted mold temperature control (Ex-GMTC) on the quality of weld line of molding products. In the heating step, the heating rate was 19.6 °C/s from 30 to 128.5 °C in the first 5 s in a 400 °C gas environment. When applied to heating the weld line area of an injection mold, Ex-GMTC improved the appearance of the weld line when the cavity temperature was preheated to 150 °C. For the tensile strength test, a melt flow simulation comparing the packing pressure of different mesh thicknesses revealed that Ex-GMTC helped maintain a high pressure in the weld line area in different packing periods. This was verified by an experiment where Ex-GMTC was applied with 400 °C gas to change the mesh area temperature. The result indicated that an increase in the weld line area temperature from 60 to 180 °C improves the tensile strength of all mesh thicknesses, which was more pronounced with thinner parts, especially at 0.4 mm. The simulations revealed that high temperature is concentrated in the weld line area of the cavity surface, thus reducing the energy wasted during heating.

Numerical Study on Local Heating for Thin-Walled Product by External Air Heating

Gas-assisted mold temperature control (GMTC) is a new technique in the field of mold temperature control. It enables rapid heating and cooling of the cavity surface during the injection molding process. In general, the goals of mold temperature control are to increase the mold surface to the target temperature before filling of the melt and to cool the melt to the ejection temperature. In this paper, dynamic mold temperature control is used for a thin-walled molding part as the temperature distribution and the heating rate are observed. The heating step of DMTC is achieved via hot-air flow directly to the thin-walled area. The results show that the heating rate reached 7.0 °C/s and that the temperature of the mold surface increased from 25 °C to greater than 165 °C within 20 s. A comparison showed that the difference between the simulation and experiment temperatures was less than 5.0 °C. Thus, this method can be used to accurately predict the outcome of a heating step before the actual process is carried out.

Effects of dynamic mold temperature control on melt pressure, cellular structure, and mechanical properties of microcellular injection-molded parts: An experimental study

In this work, the effects of dynamic mold temperature control (DMTC) on melt pressure, cellular structure, and mechanical properties of microcellular injection molding (MIM)-molded parts are investigated experimentally. It is found that with the increase of the mold temperature, the duration of foaming pressure in the cooling stage increases. Meanwhile, the average cell diameter and cell diameter dispersion increases as well as the cell density decreases in MIM molded parts. The turning point of mold temperature after which the foaming pressure in the cooling stage and the cellular structure in MIM molded parts generate a significant change is around the glass transition temperature of the used plastic material. Under DMTC conditions, with the increase of mold temperature, the tensile strength, flexural strength, and impact strength of MIM molded specimens of single gate without weld line change a little, while the tensile strength, flexural strength of MIM molded specimens of double gates with weld line increase obviously. When the mold temperature increases to 120°C and over, the tensile strength, flexural strength of MIM molded specimens of double gates with weld line reach an equivalent level of specimens of single gate without weld line.

Influence of the Mold Temperature and Part Thickness on the Replication Quality and Molecular Orientation in Compression Injection Molding of Polystyrene

Abstract It is well known that the process of injection molding with dynamic mold temperature control leads to a good replication quality of high aspect ratio microstructures. However, the inhomogeneous pressure distribution during the holding pressure phase results in an anisotropy of the component properties, low dimensional accuracy and, especially with optical polymers, in undesired stress birefringence. The anisotropy is based on the orientation of the molecular chains in the flow direction, which can be reduced by an injection-compression molding (ICM) process. In order to use the synergy from both processes, an injection-compression molding process with dynamic mold temperature control can be utilized. Within the scope of this investigation, the new process was reproduced by an ICM process at elevated mold temperature (ICM_EMT) and compared with injection molding (IM) with regard to molding accuracy and optical properties in dependence of component thickness and mold temperature. In order to evaluate the molding accuracy, the roughness of a wire-eroded microstructure on the cavity surface was measured. To determine the degree of orientation, the optical properties considered were the transmission and the path difference. It was shown that the adapted ICM process was able to achieve a high degree of replication accuracy with a low degree of orientation, especially for thin-walled components. ICM at elevated mold temperature reduced the path difference in the components with the lowest wall thickness by a factor of two while at the same time optimizing the replication of the microstructure. This could also be confirmed by transmission measurements.

Study on External Gas-Assisted Mold Temperature Control for Improving the Melt Flow Length of Thin Rib Products in the Injection Molding Process

In the injection molding process, mold temperature control is one of the most efficient methods for improving product quality. In this research, an external gas-assisted mold temperature control (Ex-GMTC) with gas temperature variation from 200°C to 400°C was applied to thin wall injection molding at melt thicknesses from 0.2 to 0.6 mm. The melt flow length was evaluated through the application of this system to the mold of a thin rib product. The results show that the heating process achieves high efficiency in the initial 20 s, with a maximum heating rate of 6.4°C/s. In this case, the mold surface reached 158.4°C. By applying Ex-GMTC to a 0.2 mm flow thickness, the flow length increased from 37.85 to 41.32 mm with polypropylene (PP) material and from 14.54 to 15.8 mm with acrylonitrile butadiene styrene (ABS) material. With the thin rib mold and use of Ex-GMTC, the mold temperature varied from 112.0°C to 140.8°C and the thin rib height reached 7.0 mm.