Molar Chewing Research Articles

MORPHOLOGICAL SUBSTANTIATION OF APPLICATION OF THE DEVELOPED STOMATOLOGIC MEDICAL PREPARATION BY THE BIOLOGICAL METHOD OF TREATINMENT OF THE PULPITIS

Aim. This study was designed for the morphological assessment of the state of tooth pulp tissues after simulated acute 29 Kubanskij nauchnyj medicinskij vestnik 2018; 25 (5) trauma under the influence of the developed dental treatment pad and three analogues in the treatment of deep caries and acute focal pulpitis.Materials and methods.In the course of the experiment the study was conducted on white laboratory rats. The cavities on the molar chewing surface of the upper jaw were formed by spherical burs. The experimentally formed lesions of the surface layer of the pulp were treated using the developed dental preparation and three analogues. Laboratory animals were withdrawn from the experiment on days 3, 7 and 30. Animal teeth were put in a 10% neutral formalin solution, decalcified for 3 days and then put into a mounting medium. The slices obtained had a thickness of 5-15 μm.Results. In the course of the experimental study we detected the activation of reactive and compensatory processes in the tooth pulp tissue with the preservation of its viability by using the developed dental therapeutic preparation and the Biodentin as a comparison preparation on the 30th day of the experiment. Histologically, these changes were expressed in an increase in the level of metabolic processes and in the activation of cellular elements of the tooth pulp tissue on the 30th day of the experiment.Conclusion. As a result of an experimental study of the developed dental therapeutic preparation for the treatment of deep caries and acute focal pulpitis, there was established a specific and multifunctional property in preventing and prophylaxis of the inflammation development and enhancing the protective properties of the pulp tissue under the influence of this preparation.Morphological evaluation of the application of the developed dental treatment pad showed a rapid arrest of the inflammatory response of the pulp tissue within 30 days and the normalization of the main components of the tooth pulp.Developed during the conducted experimental research dental therapeutic preparation confirmed its stated properties, in particular, anti-inflammatory, antiseptic, analgesic, moreover, it is not inferior in its properties to the drugs presented in the course of the experimental study.

Masticatory biomechanics of the Laotian rock rat,Laonastes aenigmamus, and the function of the zygomaticomandibularis muscle

The Laotian rock rat, Laonastes aenigmamus, is one of the most recently discovered species of rodent, and displays a cranial morphology that is highly specialised. The rostrum of L. aenigmamus is exceptionally elongate and bears a large attachment site for the infraorbital portion of the zygomaticomandibularis muscle (IOZM), which is particularly well-developed in this species. In this study, we used finite element analysis to investigate the biomechanical performance of the Laotian rock rat cranium and to elucidate the function of the IOZM. A finite element model of the skull of L. aenigmamus was constructed and solved for biting on each of the teeth (incisors, premolar and molars). Further load cases were created and solved in which the origin of the IOZM had been moved anteriorly and posteriorly along the rostrum. Finally, a set of load cases were produced in which the IOZM was removed entirely, and its force was redistributed between the remaining masticatory muscles. The analysis showed that, during biting, the most stressed areas of the skull were the zygomatic and orbital regions. Compared to other rodents, L. aenigmamus is highly efficient at incisor gnawing, but less efficient at molar chewing. However, a relatively constant bite force across the molar tooth row may be an adaptation to folivory. Movement of the origin of the IOZM had little on the patterns of von Mises stresses, or the overall stress experienced by the cranium. However, removal of the IOZM had a substantial effect on the total deformation experienced by the skull. In addition, the positioning and presence of the IOZM had large impact on bite force. Moving the IOZM origin to the anterior tip of the rostrum led to a substantially reduced bite force at all teeth. This was hypothesised to be a result of the increasing horizontal component to the pull of this muscle as it is moved anteriorly along the rostrum. Removal of the IOZM also resulted in reduced bite force, even when the total input muscle force was maintained at the same level. It was thus concluded that the function of the IOZM in L. aenigmamus is to increase bite force whilst reducing cranial deformation. If the IOZM can be shown to have this function in other rodent groups, this may help explain the evolution of this muscle, and may also provide an understanding of why it has evolved independently several times within rodents.

Functional Evolution of the Feeding System in Rodents

The masticatory musculature of rodents has evolved to enable both gnawing at the incisors and chewing at the molars. In particular, the masseter muscle is highly specialised, having extended anteriorly to originate from the rostrum. All living rodents have achieved this masseteric expansion in one of three ways, known as the sciuromorph, hystricomorph and myomorph conditions. Here, we used finite element analysis (FEA) to investigate the biomechanical implications of these three morphologies, in a squirrel, guinea pig and rat. In particular, we wished to determine whether each of the three morphologies is better adapted for either gnawing or chewing. Results show that squirrels are more efficient at muscle-bite force transmission during incisor gnawing than guinea pigs, and that guinea pigs are more efficient at molar chewing than squirrels. This matches the known diet of nuts and seeds that squirrels gnaw, and of grasses that guinea pigs grind down with their molars. Surprisingly, results also indicate that rats are more efficient as well as more versatile feeders than both the squirrel and guinea pig. There seems to be no compromise in biting efficiency to accommodate the wider range of foodstuffs and the more general feeding behaviour adopted by rats. Our results show that the morphology of the skull and masticatory muscles have allowed squirrels to specialise as gnawers and guinea pigs as chewers, but that rats are high-performance generalists, which helps explain their overwhelming success as a group.

A finite element analysis of masticatory stress hypotheses

Understanding how the skull transmits and dissipates forces during feeding provides insights into the selective pressures that may have driven the evolution of primate skull morphology. Traditionally, researchers have interpreted masticatory biomechanics in terms of simple global loading regimes applied to simple shapes (i.e., bending in sagittal and frontal planes, dorsoventral shear, and torsion of beams and cylinders). This study uses finite element analysis to examine the extent to which these geometric models provide accurate strain predictions in the face and evaluate whether simple global loading regimes predict strains that approximate the craniofacial deformation pattern observed during mastication. Loading regimes, including those simulating peak loads during molar chewing and those approximating the global loading regimes, were applied to a previously validated finite element model (FEM) of a macaque (Macaca fascicularis) skull, and the resulting strain patterns were compared. When simple global loading regimes are applied to the FEM, the resulting strains do not match those predicted by simple geometric models, suggesting that these models fail to generate accurate predictions of facial strain. Of the four loading regimes tested, bending in the frontal plane most closely approximates strain patterns in the circumorbital region and lateral face, apparently due to masseter muscle forces acting on the zygomatic arches. However, these results indicate that no single simple global loading regime satisfactorily accounts for the strain pattern found in the validated FEM. Instead, we propose that FE models replace simple cranial models when interpreting bone strain data and formulating hypotheses about craniofacial biomechanics.

Influence of changing the chewing region on mandibular movement

In the shortened dental arch condition, little is known of how patients adapt their jaw function during mastication to the new oral environment. This study aimed to investigate the changes in mandibular movements when the chewing region was changed from the first molar to the first premolar. Thirty clinical residents with natural dentitions were recruited. The subjects were asked to chew a piece of beef jerky using either the first molar or the first premolar on the preferred chewing side. Three-dimensional trajectories of lower incisors and both condyles were analysed using a jaw movement tracking device with six degrees of freedom during the period between the onset and offset of electromyographic bursts from the masseter and anterior temporal muscles. The closing angle of the lower incisors for first premolar chewing was narrower in comparison with that for first molar chewing (p < 0.05). The lengths of the condylar trajectories and the maximum velocities of the condylar movement for first premolar chewing were smaller and slower, respectively, in comparison with those for first molar chewing (both sides; p < 0.01). The mandibular movement during mastication might be changed to adapt the premolar chewing because of a loss of posterior occlusal supports.

Effect of sample thickness on bite force studied with a multiple-point sheet sensor.

The aim of this study was to investigate the relationship between thickness of sample food and bite force. We designed a new sensor that can detect the pressure distribution between the incisor and molar teeth on one side, and the contact area between the food samples and the teeth. The force and contact area were directly measured in real time using the multiple-point sheet sensor, which is a very thin and flexible pressure-sensing device. Silicone rubber blocks were used as a sample food and were chewed with incisors and molars by 10 healthy women. The peak force, contact area, duration and impulse were greater between the incisors for a thicker specimen. The active pressure, defined as the ratio of the force to contact area, at peak was similar for different thicknesses. In contrast, with a 2 mm thick sample, the peak force and force related parameters were greatest in molar chewing. The force, contact area and duration were greater for molar chewing cycles than incisor ones. We verified that the thickness of samples influenced the chewing force of humans and the effects differed between incisors and molars.

Strain in the galago facial skull.

Little experimental work has been directed at understanding the distribution of stresses along the facial skull during routine masticatory behaviors. Such information is important for understanding the functional significance of the mammalian circumorbital region. In this study, bone strain was recorded along the dorsal interorbit, postorbital bar, and mandibular corpus in Otolemur garnettii and O. crassicaudatus (greater galagos) during molar chewing and biting. We determined principal-strain magnitudes and directions, compared peak shear-strain magnitudes between various regions of the face, and compared galago strain patterns with similar experimental data for anthropoids. This suite of analyses were used to test the facial torsion model (Greaves [1985] J Zool (Lond) 207:125-136; [1991] Zool J Linn Soc 101:121-129; [1995] Functional morphology in vertebrate paleontology. Cambridge: Cambridge University Press, p 99-115). A comparison of galago circumorbital and mandibular peak strains during powerful mastication indicates that circumorbital strains are very low in magnitude. This demonstrates that, as in anthropoids, the strepsirhine circumorbital region is highly overbuilt for countering routine masticatory loads. The fact that circumorbital peak-strain magnitudes are uniformly low in both primate suborders undermines any model that emphasizes the importance of masticatory stresses as a determinant of circumorbital form, function, and evolution. Preliminary data also suggest that the difference between mandibular and circumorbital strains is greater in larger-bodied primates. This pattern is interpreted to mean that sufficient cortical bone must exist in the circumorbital region to prevent structural failure due to nonmasticatory traumatic forces. During unilateral mastication, the direction of epsilon(1) at the galago dorsal interorbit indicates the presence of facial torsion combined with bending in the frontal plane. Postorbital bar principal-strain directions during mastication are oriented, on average, very close to 45 degrees relative to the skull's long axis, much as predicted by the facial torsion model. When chewing shifts from one side of the face to the other, there is a characteristic reversal or flip-flop in principal-strain directions for both the interorbit and postorbital bar. Although anthropoids also exhibit an interorbital reversal pattern, peak-strain directions for this clade are opposite those for galagos. The presence of such variation may be due to suborder differences in relative balancing-side jaw-muscle force recruitment. Most importantly, although the strain-direction data for the galago circumorbital region offer support for the occurrence of facial torsion, the low magnitude of these strains suggests that this loading pattern may not be an important determinant of circumorbital morphology.

Jaw muscles of Old World squirrels.

The jaw, suprahyoid, and extrinsic tongue muscles were studied in 11 genera, belonging to five tribes, of Old World squirrels. Significant variation in most of the adductor muscles is evident. The most primitive state of sciuromorphy is seen in the African tree squirrels Paraxerus and Funisciurus, especially as reflected in the anterior deep masseter. A derived state of sciuromorphy is found in five genera of Old World squirrels and perhaps evolved independently in each. Reduction of the temporalis muscle was observed in three genera, distantly related to one another. A unique arrangement of the superficial masseter is reported in the Asian giant tree squirrels, Ratufa. The arrangement of the masseter in the African pygmy squirrel, Myosciurus, is very similar to that of the South American pygmy squirrel, Sciurillus. We present hypotheses about the functional significance of these differences. In the derived state of sciuromorphy, which is found in three cases in squirrels that feed extensively on hard fruits, the anterior deep masseter is well positioned to increase the strength of the power stroke of the incisor bite. Among the pygmy squirrels, the position of the anterior deep masseter suggests that it plays a more significant role in molar chewing.

犬歯・小臼歯部，および大臼歯部におけるそしゃく運動の特徴

The purpose of this study was to investigate the characteristics of masticatory movement in different chewing regions. Eleven normal subjects were instructed to perform the masticatory movement in two different regions, canine/premolar region and molar region. The masticatory movement was measured by 3-D Mandibular Movement Analyzing System. The results were as follows:1. A significant difference was found in the opening distance between canine/premolar chewing and molar chewing.2. A significant difference was found in the lateral displacement of the lowest point of chewing between canine/premolar chewing and molar chewing.3. A significant difference was found in the frontal angle of chewing between canine/premolar chewing and molar chewing.4. A significant difference was not found in the chewing cycle between canine/premolar chewing and molar chewing.5. A significant difference was found in the displacement of kinematic axis between canine/premolar chewig and molar chewing.It was suggested that there was great difference between canine/premolar chewing and molar chewing.

Direct measurement of loads at the temporomandibular joint in Macaca arctoides.

This paper describes a novel technique of directly measuring loads at the condyle in Macaca arctoides and provides recordings on one animal while measuring loads at the TMJ. This study is the first to actually measure loads directly at the articulating surfaces of the condyle. The data collected in this study confirm Hylander's data that the TMJ is a stress-bearing joint. With this pilot study, observations which can be made are: 1) The loads at the condyle are minimal during posterior chewing of both soft and hard foods (1-3 lb), and 2) during mastication of food the load (3-4 lb) at the condyle is larger than for posterior chewing. It was demonstrated during the calibration of the transducer that as the condyle translates forward over the articulating eminence during opening, a load is produced on it which is as large as the load present during incisal biting. Since recordings were only successfully taken on one animal, the above observations must be confirmed with further experiments.