Surface Modification Research Articles

Surface modification for steel rods based on atmospheric-pressure nitrogen plasma treatment at room temperature

A surface modification process for steel rods based on atmospheric-pressure nitrogen plasma (APP) at room temperature was developed. Steel rods were irradiated with APP generated by dielectric-barrier discharge in a nitrogen atmosphere. Elemental analysis using an electron-probe microanalyzer revealed strong nitrogen signals at the top surface, which suggests the formation of a modified layer due to the generation of excited nitrogen sources by APP. However, no noticeable nitrogen diffusion into the steel was observed. This is because the excited nitrogen sources reacted with elemental iron emitted by APP and nitrides were deposited on the surface of the steel. The proposed APP treatment is a promising approach for modifying the surface of steel rods without heat treatment.

Carbon materials and their metal composites for biomedical applications: A short review.

Carbon materials and their hybrid metal composites have garnered significant attention in biomedical applications due to their exceptional biocompatibility. This biocompatibility arises from their inherent chemical stability and low toxicity within biological systems. This review offers a comprehensive overview of carbon nanomaterials and their metal composites, emphasizing their biocompatibility-focused applications, including drug delivery, bioimaging, biosensing, and tissue engineering. The paper outlines advancements in surface modifications, coatings, and functionalization techniques designed to enhance the biocompatibility of carbon materials, ensuring minimal adverse effects in biological systems. A comprehensive investigation into hybrid composites integrating carbon nanomaterials is conducted, categorizing them as fullerenes, carbon quantum dots, carbon nanotubes, carbon nanofibers, graphene, and diamond-like carbon. The concluding section addresses regulatory considerations and challenges associated with integrating carbon materials into medical devices. This review culminates by providing insights into current achievements, challenges, and future directions, underscoring the pivotal role of carbon nanomaterials and their metal composites in advancing biocompatible applications.

Growth of thick amorphous carbon films on alumina for improved tribological properties

Alumina, as a pivotal ceramic material extensively utilized in contemporary applications, the surface modification and enhancement of tribological properties are crucial. In this study, reactive magnetron sputtering was employed to deposit Ti, Si co-doped hydrogen-free (TiSi/a-C), and hydrogenated amorphous carbon films (TiSi/a-C:H) with a thickness exceeding 7 μm onto the surface of alumina ceramic substrates. Utilizing the design of the film structure, the difficulty of film-substrate adhesion was resolved by controlling the deposition time to influence the growth rate of the film, thereby enabling the reliable fabrication of thick films. The adhesion of the TiSi/a-C film exhibits the highest value, with an Lc1 value of 36.7 N. The hardness of the TiSi/a-C:H reaches a maximum of 15.2 GPa, and the hardness is closely correlated with the reaction gas utilized during its depositional process. The wear rate of amorphous carbon film decreases by 34 times compared to alumina substrate. During the dissociation of CH4 at a high hydrogen-to-carbon ratio, more hydrogen atoms are involved in the chemical reaction. The introduction of hydrogen elevates the H/E and sp3/sp2 ratios within the film, thereby favoring the generation of low-friction surfaces and refining the tribological performance of alumina ceramics.

Programming of a Portable Digital Monitoring System-Integrated DNA Aptamer Reversely Regulated Oxidase-Like Nanozyme for Real-Time Dynamic Analysis of Atmospheric Perfluorooctanoic Acid.

Timely and efficient analysis of the fluorinated per- and polyfluoroalkyl substances (PFAS) in an atmospheric environment is critical to environmental pollution traceability, early warnings, and governance. Here, a portable, reliable, and intelligent digital monitoring device for onsite real-time dynamic analysis of atmospheric perfluorooctanoic acid (PFOA) is proposed. The sensing mechanism is attributed to the oxidase-like activity of PtCoNPs@g-C3N4 that is reversely regulated by the surface modification of a PFOA-recognizable DNA aptamer, engineering a PFOA-activated oxidase-like activity of nanozyme (Apt-PtCoNPs@g-C3N4) to combine the nonfluorescence o-phenylenediamine (OPD) as the dual-modality response system. The present PFOA interacts with its DNA aptamer and dissociates from the surface of Apt-PtCoNPs@g-C3N4, restoring the oxidase-like activity of PtCoNPs@g-C3N4 to oxidize OPD into yellow fluorescence 2,3-diphenylaniline (DAP), thereby observing a PFOA-triggered colorimetric as well as fluorescence dual-modality change. Then, a hydrogel kit-programmed Apt-PtCoNPs@g-C3N4 + OPD system is used as the sensitive element to incorporate into this homemade portable device, automatically gathering and processing the PFOA-triggered hydrogel colorimetric and fluorescence image gray values by our self-weaving software, ultimately realizing the onsite real-time dynamic analysis of atmospheric PFOA surrounding a fluorochemical production plant. This work provides a direction and theoretical foundation for designing portable onsite screening devices that cater to other atmospheric contaminants detection requirements.

Evaluating the bio-functionalities of Ti-6Al-7Nb alloy after surface modification using electrical discharge machining

Abstract The present work evaluates the influence of surface modification on the bio-functionalities of Ti-6Al-7Nb alloy in terms of apatite formation, metal ion release rate and anti-bacterial activities. The surface modification in the form of change in surface integrity, and increases in the exposed surface area, has been achieved using wire-electrical discharge machining (WEDM) and electrical dischargeµ-drilling(EDD). Due to high discharge energies, molten material will deposit on the parent material (recast layer), which increases the surface roughness (parent surface 0.5µm to 2.34µm) and hardness (patent material 304VH to 385VH) after subsequent re-solidification and quenching. Surface roughness and hardness near the micro-drilled hole are observed to increase. After surface modification, the apatite formation is increased on Ti-6Al-7Nb alloy with increasing immersion time and the ion released rate was found lowest on the WEDMed surface as compared to micro drilled and polished surface. Field-emission electron scanning microscopy (FESEM) and energy dispersive X-ray spectroscopy (EDAX) observations confirmed the presence of phosphate and calcium ions on the WEDMed surface and nearby the micro-drilled surface. The variation in colour of the simulated body fluid(SBF)after the immersion of WEDMed, EDD, and polished samples indicates the variable effect on pH levels of the SBF solution for three types of samples. The anti-bacterial bioactivity of Ti-6Al-7Nb was found to be better on the WEDMed surface as compared to polished surfaces, which is due to the formation of a rutile-TiO2 layer on WEDMed surface.

Fabrication of PHFPO Surface-Modified Conductive AgNWs/PNAGA Hydrogels with Enhanced Water Retention Capacity toward Highly Sensitive Strain Sensors.

Conductive hydrogels, characterized by their unique features of flexibility, biocompatibility, electrical conductivity, and responsiveness to environmental stimuli, have emerged as promising materials for sensitive strain sensors. In this study, a facile strategy to prepare highly conductive hydrogels is reported. Through rational structural and synthetic design, silver nanowires (AgNWs) are incorporated into poly(N-acryloyl glycinamide) (PNAGA) hydrogels, achieving high electrical conductivity (up to 0.88 S m-1), significantly enhanced mechanical properties, and elevated deformative sensitivity. Furthermore, surface modification with polyhexafluoropropylene oxide (PHFPO) has substantially improved the water retention capacity and dressing comfort of this hydrogel material. Based on the above merits, these hydrogels are employed to fabricate highly sensitive wearable strain sensors which can detect and interpret subtle hand and finger movements and enable precise control of machine interfaces. The AgNWs/PNAGA based strain sensors can effectively sense finger motion, enabling the control of robotic fingers to replicate the human hand's gestures. In addition, the high deformative sensitivity and elevated water retention performance of the hydrogels makes them suitable for flow sensing. These conceptual applications demonstrate the potential of this conductive hydrogel in high-performance strain sensors in the future.

Nanographene Oxide Promotes Angiogenesis by Regulating Osteoclast Differentiation and Platelet-Derived Growth Factor Secretion.

An imbalanced system of angiogenesis-osteoblasts-osteoclasts is regarded as the main factor in bone remodeling dysfunction diseases or osseointegration loss. Osteoclast precursors are the key cells that accelerate bone-specific angiogenesis and maintain normal osteoblast and osteoclast function. Graphene oxide is an effective scaffold surface modification agent with broad application prospects in bone tissue engineering. However, the effect of graphene oxide on the interaction between osteoclasts and angiogenesis has not yet been elucidated. In this study, a rat calvarial defect model was established and treated with an electrochemically derived nanographene oxide (ENGO) hydrogel. Higher angiogenesis and platelet-derived growth factor (PDGF) B in preosteoclasts were observed in the ENGO group compared with that in the control group. Moreover, in vitro experiments demonstrate the efficacy of ENGO in substantially reducing the expression of the receptor activator of nuclear factor-kappaB ligand (RANKL)-induced osteoclast-associated markers and inhibiting bone resorption activity. Additionally, ENGO enhances the secretion of the osteoclast-derived coupling factor PDGF-BB and promotes angiogenesis. Our investigation revealed the crucial role of isocitrate dehydrogenase 1 (IDH1) in the ENGO-mediated regulation of osteoclast differentiation and PDGF-BB secretion. The decreased expression of IDH1 reduces the level of histone lysine demethylase 7A (KDM7A) and subsequently increases the H3K9me2 level in the cathepsin K promoter region. In summary, we found that ENGO promotes angiogenesis by inhibiting the maturity of RANKL-induced osteoclasts and enhancing PDGF-BB secretion. These results indicate that ENGO holds promise for the application in fostering osteoclast-endothelial cell crosstalk, providing an effective strategy for treating bone resorption and osteoclast-related bone loss diseases.

Sensitive Colorimetric Lateral Flow Assays Enabled by Platinum-Group Metal Nanoparticles with Peroxidase-Like Activities.

The last several decades have witnessed the success and popularity of colorimetric lateral flow assay (CLFA) in point-of-care testing. Driven by increasing demand, great efforts have been directed toward enhancing the detection sensitivity of CLFA. Recently, platinum-group metal nanoparticles (PGM NPs) with peroxidase-like activities have emerged as a type of promising colorimetric labels for enhancing the sensitivity of CLFA. By incorporating a simple and rapid post-treatment process, the PGM NP-based CLFAs are orders of magnitude more sensitive than conventional gold nanoparticle-based CLFAs. In this perspective, the study begins with introducing the design, synthesis, and characterization of PGM NPs with peroxidase-like activities. The current techniques for surface modification of PGM NPs are then discussed, followed by operation and optimization of PGM NP-based CLFAs. Afterward, opinions are provided on the social impact of PGM NP-based CLFAs. Lastly, this perspective is concluded with an outlook of future research directions in this emerging field, where the challenges and opportunities are discussed.

Exploring the influence of concave-convex surface modifications on piezoelectric wind energy harvesting: A numerical analysis

Wireless health monitoring sensors are significant for the safety of sea-crossing bridges, and their operation is dependent on a durable and reliable power source. Piezoelectric wind energy harvesters (PWEHs) can be effectively utilized in windy marine environments and provide a sustainable power supply for these sensors. This paper examines the influence of concave-convex surface modifications of a circular cylinder on the performance of the PWEH through numerical research to improve the output and operational bandwidth of traditional harvesters using cylindrical bluff bodies. An electromechanical model, coupled with computational fluid dynamics on low-Reynolds-number flows, was developed and different concave-convex configurations were proposed to explore the impact by numerical experiments. The results show that the configuration with two protrusions plus one groove is the optimal design. This configuration exhibits a much higher output with a maximum voltage of 19.5 V, representing a 464% increase compared to the cylindrical bluff body's 4.2 V, and a broader bandwidth with no upper limit across the wind speed range. This study provides insight into effective and ineffective efforts to enhance energy harvesting through concave-convex surface modifications and is advantageous to the advancement of self-powered marine sensing systems, particularly in the health monitoring of sea-crossing bridges.

Sol-Gel Transition of a Thermo-Responsive Polymer at the Closest Solid Interface.

Thermo-responsive polymers are applied as surface modifications for the temperature switching of hydrophilic and hydrophobic properties through adsorption and grafting on solid substrates. The current understanding of the influence of polymer chains bound to the solid surface on the transition behavior of thermo-responsive polymers is rather restricted. In this study, we aim to elucidate the effect of the bound polymer chains at the interface on the thermo-responsive sol-gel transition behavior of aqueous methylcellulose (MC) solutions by employing a quartz crystal microbalance (QCM) to evaluate the shear modulus near the solid interface. When the sample thickness was thinner on the order of the millimeter scale, the sol-gel transition temperature evaluated by the cloud point decreased because the condensation of MC near the solid interface promoted the sol-gel transition. On the other hand, focusing on the closest solid interface on the nanometer scale by QCM, the sol-gel transition temperature increased when approaching the solid interface. Adsorption and interfacial interactions reduced the chain mobility and restrained the sol-gel transition by preventing MC chain aggregation. We demonstrated the physical properties evaluation at the closest interface between the thermo-responsive polymer and solid substrate by combining a simple analytical model of QCM and controlling the analytical depth of the QCM sensors. In conclusion, the mobility change of the bound polymer chains at the solid interface caused by adsorption and interfacial interactions must be considered when a thermo-responsive polymer is applied as in adsorbed or thin films on solid substrates for the functionalization of biomaterials.

Application of In-House Xylanases as an Addition to a Commercial Cellulase Cocktail for the Sustainable Saccharification of Pretreated Blue Agave Bagasse Used for Bioethanol Production

The study involves the use of commercial cellulase Cellic CTec2 in combination with two in-house xylanases, PxXyn10A (XynA), a recombinant purified enzyme from Paenibacillus xylanivorans A59, and a xylanase enzymatic extract from native Moesziomyces aphidis PYCC 5535T (MaPYCC 5535T), for the enzymatic hydrolysis of pretreated blue agave bagasse (BAB) at the high solids load of 20% (w/v). Three different combinations of cellulase and xylanases were evaluated. When Cellic® CTec2 was used at a dosage of 10 FPU/g oven-dried solids (ODS) supplemented with XynA or MaPYCC 5535T at an endo-xylanase dosage of 100 U/g ODS, increases in the xylose yield of 30% and 33%, respectively, were obtained. When applying in-house xylanases alone (at an endo-xylanase dosage of 100 U/g ODS), xylan in BAB was selectively hydrolyzed into xylose with 5% yield with MaPYCC 5535T, while no xylose was detected with XynA. Interestingly, a synergic effect of Cellic® CTec 2 with both xylanases was observed when using a low dosage of 1 FPU/g ODS (allowing for some liquefaction of the reaction mixture), promoting xylose and glucose release by either xylanase. A higher concentration of monomeric sugars was obtained with 10 FPU/g ODS of Cellic® Ctec 2 supplemented with 100 U/g ODS of MaPYCC 5535T, followed by XynA. The improvement in saccharification through the synergistic combination of in-house xylanases and commercial cellulases allows for the obtention of sugar-rich hydrolysates, which enhances the technical sustainability of the process. Hydrolysates were then fermented using recombinant Cellux 4TM yeast to yield 45 g/L ethanol, representing an increase of about 30% with respect to the control obtained with only the commercial cellulase cocktail. The surface modification of agave biomass with the different combinations of enzymes was evidenced by scanning electron microscopy (SEM).

Effect of Pinless Friction Stir Processing on Microstructure and Properties of Surface Modification Layer of 2024 Aluminum Alloy

Abstract Friction stir processing (FSP) is an advanced material surface modification technology that is both green and energy-efficient. This technology plays a crucial role in regulating the surface microstructure of alloys and improving their material surface properties. It achieves this through the synergistic effect of non-equilibrium thermodynamics and surface mechanical deformation. In this work, the surface modification of an aluminum alloy was performed using pin-less FSP. And the modified surface was then analyzed using stress-strain curves, optical microscopy (OM), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electrochemical tests to investigate the impact of spindle velocity on the modified layer's properties. Results of the study show after undergoing pin-free FSP modification treatment, the surface of the alloy appears bright and flat. The modified layer displays refined grains and numerous dispersed second-phase particles. Furthermore, the grains in the modified layer exhibit a gradient distribution from the surface to the matrix. Regarding the properties, Compared to the base material (BM), the yield strength (σ0.2) and tensile strength (σb) of the alloy-modified layer were increased by 34.8% and 29.4%, respectively. The maximum elongation (δ) of the modified coating reached 22.3%. The modified layer exhibits a tough-brittle mixed fracture pattern. Additionally, the modified layer's corrosion resistance significantly improves. The performance of the modified coating shows the most significant improvement when the spindle speed reaches 1000 rpm. The study aims to explore the effect of spindle speed on the properties of alloy-modified layers produced by FSP without a stirring pin. This research could be used to create superior metal matrix composites by adding reinforcement particles.

A comparative study of sericin and gluten for magnetic nanoparticle-mediated drug delivery to breast cancer cell lines

With breast cancer emerging as a pressing global health challenge, characterized by escalating incidence rates and geographical disparities, there is a critical need for innovative therapeutic strategies. This comprehensive research navigates the landscape of nanomedicine, specifically focusing on the potential of magnetic nanoparticles (MNPs), with magnetite (Fe3O4) taking center stage. MNPs, encapsulated in biocompatible polymers like silica known as magnetic silica nanoparticles (MSN), are augmented with phosphotungstate (PTA) for enhanced chemodynamic therapy (CDT). PTA is recognized for its dual role as a natural chelator and electron shuttle, expediting electron transfer from ferric (Fe3+) to ferrous (Fe2+) ions within nanoparticles. Additionally, protein-based charge-reversal nanocarriers like silk sericin and gluten are introduced to encapsulate (MSN-PTA) nanoparticles, offering a dynamic facet to drug delivery systems for potential revolutionization of breast cancer therapy. This study successfully formulates and characterizes protein-coated nanocapsules, specifically MSN-PTA-SER, and MSN-PTA-GLU, with optimal physicochemical attributes for drug delivery applications. The careful optimization of sericin and gluten concentrations results in finely tuned nanoparticles, showcasing uniform size, enhanced negative zeta potential, and remarkable stability. Various analyses, from Dynamic Light Scattering (DLS) and scanning electron microscopy (SEM) to transmission electron microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR), X-Ray diffraction analysis (XRD), and Thermogravimetric analysis (TGA), provide insights into structural integrity and surface modifications. Vibrating Sample Magnetometer (VSM) analysis underscores superparamagnetic behavior, positioning these nanocapsules as promising candidates for targeted drug delivery. In vitro evaluations demonstrate dose-dependent inhibition of cell viability in MCF-7 and Zr-75–1 breast cancer cells, emphasizing the therapeutic potential of MSN-PTA-SER and MSN-PTA-GLU. The interplay of surface charge and pH-dependent cellular uptake highlights the robust stability and versatility of these nanocarriers in tumor microenvironment, paving the way for advancements in targeted drug delivery and personalized nanomedicine. This comparative analysis explores the suitability of silk sericin and gluten, unraveling a promising avenue for the development of advanced, targeted, and efficient breast cancer treatments.

Nanogel: A versatile drug delivery system for the treatment of various diseases and their future perspective.

Nanogel (NG) drug delivery systems have emerged as promising tools for targeted and controlled drug release, revolutionizing treatment approaches across various diseases.Their unique physicochemical properties, such as nano size, high surface area,biocompatibility, stability, and tunable drug release, make themideal carriers for a wide range of therapeutic agents. Nanogels (NGs), characterized by their 3D network of crosslinked polymers, offer unique edges like high drug loading capacity, controlled release, and targeted delivery. Additionally, the diverse applications of NGs in medical therapeutics highlight their versatility and potential impact on improving patient outcomes. Their application spans cancer treatment, infectious diseases, and chronic conditions, allowing for precise drug delivery to specific tissues or cells, minimizing side effects, and enhancing therapeutic efficacy. Despite their potential, challenges such as scalability, manufacturing reproducibility, and regulatory hurdles must be addressed. Achieving clinical translation requires overcoming these obstacles to ensure therapeutic payloads' safe and efficient delivery. Strategies such as surface modification and incorporating stimuli-responsive elements enhanced NG performance and addressed specific therapeutic challenges. Advances in nanotechnology, biomaterials, and targeted drug design offer opportunities to improve the performance of NGs and address current limitations. Tailoring NGs for exploring combination therapies and integrating diagnostics for real-time monitoring represent promising avenues for future research. In conclusion, NG drug delivery systems have demonstrated tremendous potential in diverse disease applications. Overcoming challenges and leveraging emerging technologies will pave the way for their widespread clinical implementation, ushering in a new era of precision medicine and improved patient care.

A Self-Catalytic NO/O2 Gas-Releasing Nanozyme for Radiotherapy Sensitization through Vascular Normalization and Hypoxia Relief.

Radiotherapy (RT), essential for treating various cancers, faces challenges from tumor hypoxia, which induces radioresistance. A tumor-targeted "prosthetic-Arginine" coassembled nanozyme system, engineered to catalytically generate nitric oxide (NO) and oxygen (O2) in the tumor microenvironment (TME), overcoming hypoxia and enhancing radiosensitivity is presented. This system integrates the prosthetic heme of nitric oxide synthase (NOS) and catalase (CAT) with NO-donating Fmoc-protected Arginine and Ru3+ ions, creating HRRu nanozymes that merge NOS and CAT functionalities. Surface modification with human heavy chain ferritin (HFn) improves the targeting ability of nanozymes (HRRu-HFn) to tumor tissues. In the TME, strategic arginine incorporation within the nanozyme allows autonomous O2 and NO release, triggered by endogenous hydrogen peroxide, elevating NO and O2 levels to normalize vasculature and improve blood perfusion, thus mitigating hypoxia. Employing the intrinsic O2-transporting ability of heme, HRRu-HFn nanozymes also deliver O2 directly to the tumor site. Utilizing esophageal squamous cell carcinoma as a tumor model, the studies reveal that the synergistic functions of NO and O2 production, alongside targeted delivery, enable the HRRu-HFn nanozymes to combat tumor hypoxia and potentiate radiotherapy. This HRRu-HFn nanozyme based approach holds the potential to reduce the radiation dose required and minimize side effects associated with conventional radiotherapy.

Distance-Independent Efficiency of Triplet Energy Transfer from π-Conjugated Organic Ligands to Lanthanide-Doped Nanoparticles.

Lanthanide-doped nanoparticles (LnNPs) possess unique optical properties and are employed in various optoelectronic and bioimaging applications. One fundamental limitation of LnNPs is their low absorption cross-section. This hurdle can be overcome through surface modification with organic chromophores with large absorption cross-sections. Controlling energy transfer from organic molecules to LnNPs is crucial for creating optically bright systems, yet the mechanisms are not well understood. Using pump-probe spectroscopy, we follow singlet energy transfer (SET) and triplet energy transfer (TET) in systems comprising different length 9,10-bis(phenylethynyl)anthracene (BPEA) derivatives coordinated onto ytterbium and neodymium-doped nanoparticles. Photoexcitation of the ligands forms singlet excitons, some of which convert to triplet excitons via intersystem crossing when coordinated to the LnNPs. The triplet generation rate and yield are strongly distance-dependent. Following their generation, TET occurs from the ligands to the LnNPs, exhibiting an exponential distance dependence, independent of solvent polarity, suggesting a concerted Dexter-type process with a damping coefficient of 0.60 Å-1. Nevertheless, TET occurs with near-unity efficiency for all BPEA derivatives due to the lack of other triplet deactivation pathways and long intrinsic triplet lifetimes. Thus, we find that close coupling is primarily important to ensure efficient triplet generation rather than efficient TET. Although SET is faster, we find its efficiency to be lower and more strongly distance-dependent than the TET efficiency. Our results present the first direct distance-dependent energy transfer measurements in LnNP@organic nanohybrids and establish the advantage of using the triplet manifold to achieve the most efficient energy transfer and best sensitization of LnNPs with π-conjugated ligands.

The elasticity of silicone-stabilized liposomes has no impact on their in vivo behavior

BackgroundThe elastomechanical properties of nanocarriers have recently been discussed as important for the efficient delivery of various therapeutics. Some data indicate that optimal nanocarriers’ elasticity can modulate in vivo nanocarrier stability, interaction with phagocytes, and uptake by target cells. Here, we presented a study to extensively analyze the in vivo behavior of LIP-SS liposomes that were modified by forming the silicone network within the lipid bilayers to improve their elastomechanical properties. We verified liposome pharmacokinetic profiles and biodistribution, including retention in tumors on a mouse model of breast cancer, while biocompatibility was analyzed on healthy mice.ResultsWe showed that fluorescently labeled LIP-SS and control LIP-CAT liposomes had similar pharmacokinetic profiles, biodistribution, and retention in tumors, indicating that modified elasticity did not improve nanocarrier in vivo performance. Interestingly, biocompatibility studies revealed no changes in blood morphology, liver, spleen, and kidney function but indicated prolonged activation of immune response manifesting in increased concentration of proinflammatory cytokines in sera of animals exposed to all tested liposomes.ConclusionIncorporating the silicone layer into the liposome structure did not change nanocarriers’ characteristics in vivo. Further modification of the LIP-SS surface, including decoration with hydrophilic stealth polymers, should be performed to improve their pharmacokinetics and retention in tumors significantly. Activation of the immune response by LIP-SS and LIP-CAT, resulting in elevated inflammatory cytokine production, requires detailed studies to elucidate its mechanism.Graphical

Biodegradable silica nanoparticles for efficient linear DNA gene delivery

Targeting, safety, scalability, and storage stability of vectors are still challenges in the field of nucleic acid delivery for gene therapy. Silica-based nanoparticles have been widely studied as gene carriers, exhibiting key features such as biocompatibility, simplistic synthesis, and enabling easy surface modifications for targeting. However, the ability of the formulation to incorporate DNA is limited, which restricts the number of DNA molecules that can be incorporated into the particle, thereby reducing gene expression. Here we use polymerase chain reaction (PCR)-generated linear DNA molecules to augment the coding sequences of gene-carrying nanoparticles, thereby maximizing nucleic acid loading and minimizing the size of these nanocarriers. This approach results in a remarkable 16-fold increase in protein expression six days post-transfection in cells transfected with particles carrying the linear DNA compared with particles bearing circular plasmid DNA. The study also showed that the use of linear DNA entrapped in DNA@SiO2 resulted in a much more efficient level of gene expression compared to standard transfection reagents. The system developed in this study features simplicity, scalability, and increased transfection efficiency and gene expression over existing approaches, enabled by improved embedment capabilities for linear DNA, compared to conventional methods such as lipids or polymers, which generally show greater transfection efficiency with plasmid DNA. Therefore, this novel methodology can find applications not only in gene therapy but also in research settings for high-throughput gene expression screenings.

Multifunctional Modification of the Buried Interface in Mixed Tin‐Lead Perovskite Solar Cells

Mixed tin‐lead perovskite solar cells can reach bandgaps as low as 1.2 eV, offering high theoretical efficiency and serving as base materials for all‐perovskite tandem solar cells. However, instability and high defect densities at the interfaces, particularly the buried surface, have limited performance improvements. In this work, we present the modification of the bottom perovskite interface with multifunctional hydroxylamine salts. These salts can effectively coordinate the different perovskite components, having critical influences in regulating the crystallization process and passivating defects of varying nature. The surface modification reduced traps at the interface and prevented the formation of excessive lead iodide, enhancing the quality of the films. The modified devices presented fill factors reaching 81% and efficiencies of up to 23.8%. The unencapsulated modified devices maintained over 95% of their initial efficiency after 2000 h of shelf storage.

Microstructure and Wear Resistance of In Situ Synthesized Ti(C, N) Ceramic-Reinforced Nickel-Based Coatings by Laser Cladding

In recent years, laser cladding technology has been widely used in surface modification of titanium alloys. To improve the wear resistance of titanium alloys, ceramic-reinforced nickel-based composite coatings were prepared on a TC4 alloy substrateusing coaxial powder feeding laser cladding technology. Ti (C, N) ceramic was synthesized in situ by laser cladding by adding different contents (10%, 20%, 30%, and 40%) of TiN, pure Ti powder, graphite, and In625 powder. Thisestudy showed that small TiN particles were decomposed and directly formed the Ti (C, N) phase, while large TiN particles were not completely decomposed. The in situ synthetic TiCxN1−x phase was formed around the large TiN particles. With the increase in the proportion of powder addition, the wear volume of the coating shows a decreasing trend, and the wear resistance of the surface coating is improving. The friction coefficient of the sample with 40% TiN, pure Ti powder, and graphite powder is 0.829 times that of the substrate. The wear volume is 0.145 times that of the substrate. The reason for this is that with the increase in TiN, Ti, and graphite in the powder, there are more ceramic phases in the cladding layer, and the hard phases such as TiC, Ti(C, N) and Ti2Ni play the role in the structure of the “backbone”, inhibit the damage caused by micro-cutting, and impede the movement of the tearing point of incision, so that the coating has a higher abrasion resistance.