Moderate Irrigation Research Articles

Study of the Importance of Irrigation Projects to Agricultural Water Resources Using the Baiqi Canal as an Example

In the global economic system, the stable development of agriculture as a basic industry is inseparable from the rational utilization of water resources. Irrigation projects play a vital role in ensuring agricultural water use, increasing grain output and promoting agricultural sustainable development. This study aims to explore the scientific experience of Baiqi Canal, an excellent irrigation project in ancient China, and its profound value as a world irrigation project heritage, analyze the importance of irrigation projects to agricultural water resources, and promote the protection and sustainable utilization of irrigation project heritage. Firstly, the irrigation mode of Baiqi Canal and its important role in agricultural development were introduced, and then its influence on local agricultural water resources and ecological environment was analyzed. Finally, the positive influence of international irrigation projects on agricultural water resources was further discussed, and its key role in ensuring food security and promoting agricultural sustainable development was emphasized.

Assessing Water Balance Influenced by Conservation Measures for Sustainable High-value Vegetable Cultivation: A Case Study of Battuvagu Watershed in Telangana, India

Rainfed areas are crucial for India’s agriculture, covering 50% of the total farmland and contributing 40% of the country’s food production. In recent years, the adverse effects of climate change have been found to be exacerbating the complex problems in vulnerable rainfed areas. While climate change affects many aspects of the environment, its impact on water resources is often swift and apparent, with far-reaching consequences for ecosystems, human well-being, and sustainable development. In this context, water budgeting at watershed level and its management are crucial towards promotion of climate resilient agriculture in the rainfed ecosystems. Comprehensive assessment of water balance was attempted, estimating the demand from agriculture, domestic and livestock needs and availability of water in terms of groundwater recharge from different sources and effective surface water stored in an agricultural watershed falling in Siddipet district of Telangana state of India. It involved collection of data on population, land use, and estimating irrigation water needs for crops, humans and livestock, followed by inventorying surface storage structures. Further, water inflow, runoff, and groundwater recharge were calculated using standard methods. The water balance was then determined by subtracting total demand from total availability. The study revealed that the water balance improved significantly, shifting from a deficit (-1.18 ha-m) of pre-project phase to a surplus (+67.91 ha-m) during post-watershed development. Thus, this study revealed the effectiveness of soil and water conservation measures taken up as a part of watershed development project in enhancing groundwater recharge and effective surface water storage capacity leading to positive water balance. The study also evaluated the use of groundwater in terms of stage of development in the pre and post project scenarios. The study concluded that there is a need for controlling the over extraction of groundwater through crop diversification especially towards market driven, less water consuming high value vegetable cultivation based on water availability with active people participation along with awareness building, propagation of efficient water application (micro-irrigation) methods, group mode of irrigation, and conjunctive use of surface and groundwater, etc. for long-term water security in the watershed.

Boosting resilience and yields in water-stressed sunflower through coordinated irrigation scheduling and silica gel applications

Sunflower (Helianthus annuus L.) is a globally significant oilseed crop, yet its yields may suffer due to water deficiency. A field experiment was conducted through two summer seasons (2021 and 2022) at the agricultural research station, Luxor, Egypt, to study the effects of irrigation regime, cultivar selection, and silica gel application on sunflower growth and yield parameters. The experiment utilized a split-split plot design with three irrigation levels based on field capacity (85 %, 70 %, 55 %), three sunflower cultivars (Sakha-53, Giza-102, and Giza-120), and two Silica gel treatments (0 and 300 kg/ha). Analysis of variance revealed significant effects of irrigation (P < 0.001) on all measured traits except 100-seed weight. Utilizing various cultivars also revealed substantial influence, affecting most traits consistently across the two seasons. Silica gel application positively impacted head diameter, 100-seed weight, oil content, and oil yield (P < 0.05). Furthermore, treatments combining moderate irrigation with silica gel application exhibited the highest water productivity, with values reaching 1.35 kg/m³ in the first season and 1.38 kg/m³ in the second season, indicating the synergistic effects of improved water management and silica gel on crop water use efficiency. Multivariate analysis of principal component analysis and clustering heatmap revealed that treatment combinations such as I2S1 (moderate irrigation with silica gel) optimized sunflower productivity, particularly for seed yield and oil content, reinforcing the importance of tailored agronomic practices for maximizing crop performance under varying environmental conditions. These findings underscore the significance of integrated agronomic approaches in enhancing sunflower productivity while promoting sustainable crop management practices.

Migration of Microplastics in the Rice–Duckweed System under Different Irrigation Modes

Microplastic (MP) pollution in agriculture is garnering growing concern due to its potential detrimental impact on soil properties and crop growth, particularly affecting staple food crops such as rice. Irrigation plays a crucial role in the migration of MPs. However, limited research has focused on how different irrigation modes affect the migration of MPs in paddy fields. To simulate real-world conditions, in this experiment, two different irrigation modes were set: shallow–frequent irrigation (FWI, I0) and controlled irrigation (CI, I1). The experiment also included treatments with and without duckweed (D0 and D1, respectively), as well as treatments with and without MPs (M0 and M1). This resulted in a total of eight treatments: I0M0D0, I0M0D1, I1M0D0, I1M0D1, I0M1D0, I0M1D1, I1M1D0, and I1M1D1. Our findings indicated that compared to CI, FWI significantly increased the MP concentration in the leakage but reduced the numbers of MPs in the first soil layer and adhered by duckweed. Notably, dry–wet cycles under CI induced soil cracking, and the MP concentrations in cracked areas were significantly higher than those of crack-free soil. Moreover, compared with the MP-free treatment, MP treatments significantly influenced rice root growth, such as enhancing the average root diameter by 13.44%, root volume by 46.87%, root surface area by 30.81%, and biomass aboveground by 26.13%, respectively. The abundance of some microorganisms was also significantly influenced by the relative mobility (RM) of MPs. Furthermore, the root length was positively correlated with Planctomycetota. Meanwhile, Actinobacteriota was negatively correlated with the root surface area, root volume, and branch number, and Bacteroidota was negatively correlated with the number of root tips. However, further research is needed to elucidate how MPs influence microorganisms and, in turn, affect rice root growth.

Effects of irrigation and nitrogen topdressing on water and nitrogen use efficiency for winter wheat with micro-sprinkling hose irrigation in North China

In order to explore the efficient use of water and nitrogen for winter wheat under irrigation with micro-sprinkling hose, two-season field experiments were conducted to evaluate the effects of irrigation levels and nitrogen application rate on yield, water productivity (WP) and nitrogen partial factor productivity (NPFP). Three irrigation levels were 60 %, 65 %, and 70 % field capacity (FC) during the reviving to jointing stage, 65 %, 70 %, and 75 % FC after the jointing stage, referred to as W1, W2 and W3, respectively. The irrigating water quota is 30 mm. The five N topdressing period treatments were reviving period + booting stage (N1), jointing + booting stage (N2), reviving period (N3), jointing stage (N4), and booting stage (N5). The results showed that the water consumption, leaf area index, plant height, biomass, grain yield, and NPFP increased with an increase in irrigation amount, and the WP decreased with an increase in irrigation amount. Nitrogen applied during the reviving period was beneficial for increasing grain yield, WP, and NPFP under the irrigation level W1; nitrogen applied during the jointing period was beneficial for increasing grain yield, WP, and NPFP for winter wheat under the W2 and W3 irrigation levels. The W3N2 treatment resulted in the highest grain yield (8.98 t·ha−1), but it was not significant difference from W2N2 (average of 8.92 t·ha−1). After a comprehensive evaluation based on grain yield, WP and NPFP, the appropriate modes of irrigation and nitrogen is the treatment of W2N2 (65 % and 70 % FC irrigation treatments during the reviving to jointing stage and the stages after jointing stage, respectively; the nitrogen topdressing during jointing + booting stage) for winter wheat using micro-sprinkling hose irrigation in North China.

The difference in the photosynthetic characteristics and soil moisture of different varieties of sweet cherry (Prunus avium L.)

Sweet Cherry (Prunus avium L.) is a highly sought-after fruit in the global market due to its nutritional value and appealing sensory characteristics. This paper investigated the indicators of photosynthetic physiological characteristics and changes in soil physical properties of different varieties of sweet cherries grown in the Loess Plateau region, which strengthened the research on the ecological aspects of photosynthetic physiology of sweet cherries. By analyzing the characteristics and similarities of photosynthesis processes in different varieties, the results were obtained to showed that most of these sweet cherries showed obvious inhibition of photosynthesis at noon. The daily net photosynthetic rate (Pn) variation graph displayed a typical bimodal curve, with the lowest values occurring successively at 12:00 pm and 14:00. The Pn of sweet cherry is mainly influenced by water use efficiency (WUE) and transpiration rate (Tr). Rainier and Summit exhibited the best performance in the daily mean of Pn due to the interplay between photosynthetic physiological and ecological factors. To affect the photosynthesis of sweet cherries, covering the greenhouses with plastic film would impact the changes in light intensity and temperature. The crop management mode of uniform mulching and drip irrigation can affect the water content of different soil depths, leading to a reduction in Pn due to the varying WUE and Tr of different varieties of sweet cherries. The order of photosynthetic physiological characteristics of different varieties of sweet cherries, as revealed by principal component analysis, was as follows: Rainier > 4YJimei > 2YTieon > 4YTieon > Summit > Jimei > Tieon > Hongdeng. These results provide a scientific theoretical basis for the introduction, promote the production of sweet cherries and provide a new understanding of the plantation management mode.

Effects of Irrigation Amount and Nitrogen Rate on Cotton Yield, Nitrogen Use Efficiency, and Soil Nitrogen Balance under Drip Irrigation

Water and nitrogen (N) are major constraints for cotton growth and yield formation in arid regions. Irrigation and N application have been widely investigated to improve crop yield and water and N use efficiency (NUE). However, further optimization of water and N management is needed because the effects of N application on soil N balance and N loss under different irrigation levels remain unclear. In this study, a field experiment was conducted in 2020 and 2021 to investigate the effects of different irrigation amounts (full irrigation (100% ETc), moderate irrigation (80% ETc), low irrigation (60% ETc)) and N application rates (control (without N application, N0), low N (150 kg ha−1, N150), medium N (225 kg ha−1 and 300 kg ha−1, N225 and N300), and high N (375 kg ha−1, N375)) on cotton yield, NUE, and soil N balance. The 2-year results showed that under the 60% ETc treatment, cotton dry matter accumulation, N uptake, and yield were significantly enhanced by increasing N application. Under the 80% and 100% ETc treatments, these parameters peaked with the N300 treatment; the N375 treatment showed no significant difference or decrease compared to the N300 treatment. The 80% ETc N300 treatment had the highest cotton yield and NUE, which increased by 17.49–106.57% and 12.28–88.78% compared with other treatments, respectively. Residual soil N accumulation (RSNmin), apparent N loss (ANL), and apparent N surplus (ANS) increased as the N application rate increased under the 60% and 100% ETc treatments. While under the 80% ETc treatment, the ANS did not significantly differ between the N225 and N300 treatments, ANL significantly decreased by 43.51–88.56% when the N application rate increased from 150 to 225 and 300 kg ha−1. The ANL of the 80% ETc N300 treatment was the lowest, but ANS did not significantly increase. The regression analysis and spatial analysis results showed that under irrigation of 336–348 mm and N application of 254–327 kg ha−1, cotton yield, NUE, and WPI reached more than 80% of the maximum value, with less apparent N loss, thus maintaining the soil N balance in drip-irrigated cotton fields. This study helps to improve the utilization of water and N resources in cotton production. Future research on optimizing water and N management needs to more fully consider environmental pollution to achieve sustainable development of agricultural ecosystems.

REDUCING OF WATER AND ENERGY RESOURCES CONSUMPTION IN IRRIGATION BASED ON RESOURCE OPTIMISATION

The need for further development of irrigation practices on the basis of nature oriented and ecologically efficient solutions is considered primarily regarding the saving of water and energy resources for the adaptation of irrigated agricultural production to the current global challenges and threats, the achievement of sustainable development goals. It is shown that there is an objective need to change methodological approaches to the assessment of overall efficiency and justification of optimal solutions in design, reconstruction, and operation projects of irrigation systems based on the principles of resource optimization. On the basis of the indicator of the level of irrigation sufficiency (introduced by the authors), which reflects the reduction of the studied watering and irrigation rates in relation to their design values, a study of the impact of reducing the use of water and energy resources under different modes of sprinkler irrigation on the corresponding decrease in the level of cultivated crops productivity was carried out. At the same time, it was experimentally determined that the intensity (rate) of the decrease in the cultivated crops productivity, which occurs due to the decrease in the usage of water and energy resources during the application of irrigation, is significantly lower than the intensity (rate) of the decrease in the usage of the resources themselves. The studied options for reducing the consumption on water and energy resources as a whole turned out to be economically profitable when with a decrease in water and electricity usage by 27–48% there is more than two times lower decrease in the costs of gross products by 10,80–18,06% with the achievement of a net income of 11,4 to 5,7 thousand UAH. The influence of various options of reducing water and electricity consumption on the discounted investment payback period shows that several options may be acceptable, for which the investment payback period does not exceed 10 years, and the choice of the optimal solution requires taking into account the conditions of a specific object, limitations of water resources, and the interests of investors and land users. At the same time, the ecological component of the overall efficiency of irrigation practices consists in the decrease in the use of water and energy resources that a priori reflects the decrease in the negative impact of irrigation on the environment. Thus, reducing the usage of water and energy resources is a fully justified decision on the way to adapt irrigated agriculture production to the modern conditions and requirements, and the presented results can be a scientific basis for the implementation of this approach while practically applying irrigation.

Monitoring Intrarenal temperature changes during Ho: YAG laser lithotripsy in patients undergoing retrograde intrarenal surgery: a novel pilot study.

Ho: YAG laser lithotripsy is widely used for urinary stone treatment, but concerns persist regarding its thermal effects on renal tissues. This study aimed to monitor intrarenal temperature changes during kidney stone treatment using retrograde intrarenal surgery with Ho: YAG laser. Fifteen patients were enrolled. Various laser power settings (0.8J/10 Hz, 1.2J/12 Hz) and irrigation modes (10cc/min, 15cc/min, 20cc/min, gravity irrigation, and manual pump irrigation) were used. A sterile thermal probe was attached to a flexible ureterorenoscope and delivered into the calyceal system via the ureteral access sheath. Temperature changes were recorded with a T-type thermal probe with ± 0.1°C accuracy. Laser power significantly influenced mean temperature, with a 4.981°C difference between 14W and 8W laser power (p < 0.001). The mean temperature was 2.075°C higher with gravity irrigation and 2.828°C lower with manual pump irrigation (p = 0.038 and p = 0.005, respectively). Body mass index, laser power, irrigation model, and operator duty cycle explained 49.5% of mean temperature variability (Adj. R2 = 0.495). Laser power and operator duty cycle positively impacted mean temperature, while body mass index and specific irrigation models affected it negatively. Laser power and irrigation rate are critical for intrarenal temperature during Ho: YAG laser lithotripsy. Optimal settings and irrigation strategies are vital for minimizing thermal injury risk. This study underscores the need for ongoing research to understand and mitigate thermal effects during laser lithotripsy.

Interactive Effect of Fertilization and Biochar on the Growth of Juniperus scopulorum under Various Shading and Irrigation Conditions

The global demand for landscape trees has been amplified with the increasing anthropogenic activity. South Korea has also witnessed a surge in demand for landscape plants, among others, Juniperus scopulorum gaining popularity for its ecological, economic, adaptability, and management attributes. However, the optimum management practice for high-quality Juniperus seedling production in South Korea remains unknown. This research was conducted on the one-to-two-years-old two cultivars of J. scopulorum, namely Blue Angel and Blue Heaven seedlings, to investigate the combined impacts of varying fertilizer concentrations (0 ppm, 150 ppm, 300 ppm) and biochar content (0% and 20%) under contrasting shading intensities (0%, 35%, 55%) and irrigation levels (200 ml, 400 ml, 800 ml). The study revealed that biochar and fertilizer amendment significantly (p &lt; 0.01 and p &lt; 0.05) enhanced the height and root collar diameter growth in Blue Angel and Blue Heaven in light shade intensity (0–35%) and higher irrigation (400–800 ml) conditions. Similarly, seedlings planted in 20% biochar and 300 ppm fertilizer yielded higher foliar, stem, and root biomass in low shade and higher irrigation conditions. The amount of shade and irrigation and their interactions significantly affected the morphological growth of seedlings for both cultivars, causing positive interaction with soil amendment (biochar and fertilizer application). These findings suggest that efficient seedling production of J. scopulorum management should focus primarily on light shading and moderate irrigation under biochar and higher fertilizer application. The research contributes valuable insights toward optimizing management practices and reducing costs associated with J. scopulorum seedling production in the region. Keywords: biochar, fertilizer, irrigation, Juniperus scopulorum, shading

Deficit Irrigation-Based Improvement in Growth and Yield of Quinoa in the Northwestern Arid Region in China

Given the current global water scarcity issues, which particularly affect arid regions such as northwestern China, it is crucial to find crop planting patterns that result in efficient water resource utilization. Quinoa, as a drought-resistant and highly nutritious crop, has garnered significant attention from agricultural researchers in recent years. From 2019 to 2020, a series of experimental studies were conducted under non-mulching drip irrigation conditions to investigate the growth adaptability and the response to different irrigation levels of quinoa in an arid region in northwestern China. A comparative analysis of quinoa’s dry matter accumulation, yield, thousand-grain weight, harvest index, and water use efficiency under varying irrigation levels revealed that increasing irrigation significantly enhanced quinoa’s dry matter accumulation and yield. By optimizing the irrigation strategies, we found that the water-saving practice of initiating moderate irrigation in the sensitive water-demanding stages (flowering and fruiting) of quinoa increased the yield. The experiment results showed that, in 2020, the optimal irrigation amount was 3675 m3·ha−1 during a 14-day irrigation cycle, meeting quinoa’s growth requirements while improving water resource utilization efficiency. This study not only provides a scientific basis for the efficient cultivation of quinoa in the arid regions of northwestern China, but also offers new insights into and technical support for agricultural water resource management in the region, contributing to the sustainable development of agriculture in arid areas.

Effects of intercropping and regulated deficit irrigation on the yield, water and land resource utilization, and economic benefits of forage maize in arid region of Northwest China

Intercropping has been widely recognized to have great advantages in terms of increasing yield, controlling pests and diseases, and saving land, particularly in developing countries. Regulated deficit irrigation reduces water consumption and improves water productivity (WP). However, it is unclear whether the combination of intercropping and deficit irrigation could improve crop yield and WP simultaneously. In this experiment, three planting modes, including forage maize (Zea mays L.) monoculture (M), lablab bean (Lablab purpureus L.) monoculture (L), and maize-lablab bean intercropping (ML) were used. Six irrigation modes were set for each planting mode, including severe water deficit (W1), late water deficit (W2), alternate water deficit (W3), late moderate water deficit (W4), early moderate water deficit (W5), and full irrigation (W6). Results showed that compared with M, the ML treatment significantly increased the fresh forage yield (9.8%–17.0%), hay yield (9.5%–13.1%), crude protein yield (22.9%–25.9%), and WP (7.8%–8.7%). The W5 treatment achieved similar fresh forage yield, hay yield, and crude protein yield as that of the W6 treatment but reduced irrigation water by 25% and increased the WP (21.9%–24.8%). Intercropping achieved a high-water equivalence ratio (WER;1.52–1.81) and land equivalence ratio (LER;1.56–1.84), indicating its advantages over monocultures. The W6 treatment had the lowest WER and LER, suggesting that excessive irrigation can reduce the efficiency of utilizing land and water resource in maze-based forage production. Among all treatments, ML–W5 achieved the highest net income and output to input ratio. Overall, intercropping of forage maize and lablab bean with moderate deficit irrigation at an early stage could be used as a high-yield and efficient forage production system in the arid areas of northwest China.

Multifractal characteristics of soil particle size distribution of abandoned homestead reclamation under different forest management modes

In this study, fast-growing poplar reclaimed from abandoned homestead in Xixian New District, Xi’an City, Shaanxi Province, was used as the research object to explore the multi-fractal characteristics of soil particle size distribution under different management modes of abandoned land (control), irrigation, fertilizer irrigation and mixed fertilizer irrigation. The results showed that the mean values of soil clay, silt and sand in abandoned land were 14.58%, 81.21% and 4.22% respectively, 14.08%, 79.92% and 5.99% under irrigation, 15.17%, 81.19% and 3.64% under fertilizer irrigation, and 16.75%, 80.20% and 3.05% in mixed fertilizer treatment. From 40 cm, with increasing soil depth, soil clay particles increase under irrigation, fertilizer irrigation, and mixed fertilizer irrigation modes. The single fractal dimension of soil particle size distribution (D) in each treatment ranges from 2.721 to 2.808. At 60–100 cm, D shows fertilizer irrigation > mixed fertilizer irrigation > irrigation > abandoned land, indicating that fertilization and irrigation can increase the fine-grained matter of deep soil particles and reduce soil roughness. Compared with abandoned land, under irrigation, fertilizer irrigation and mixed fertilizer modes the capacity dimension (D0), entropy dimension (D1), correlation dimension(D2), shape characteristics of the multifractal spectrum (Δf) and overall inhomogeneity of the soil particle size distribution (D0–D10) indicate an uneven distribution of soil particle size; fractal structure characteristics of soil (D−10–D0) indicate a simplified soil structure, and degree of dispersion of soil particle size distribution (D1/D0) indicates that soil particle size is distributed in dense areas. Pearson correlation analysis showed that D was significantly correlated with clay, sand, D0–D10, soil organic matter (SOM) and soil available phosphorus (SAP) (P < 0.05). Stepwise regression analysis showed that clay was the main controlling factor of D and D0–D10 changes. The research results can provide some potential indicators for the quality evaluation of abandoned homestead reclamation.

Physical characterization of cumin (Cuminum cyminum L.) schizocarps of different origins cultivated in Morocco

An initial investigation on the physical traits of the cumin (Cuminum cyminum L.) schizocarps was examined in order to select the best genotypes of cumin grown in three regions of Morocco (Drâa-Tafilalet, Marrackech-Safi, and Oriental). This operation was conducted on 34 cumin accessions from six origins (local, India, Syria, Egypt, Turkey, and Saudi Arabia). To evaluate differences between the physical properties among accessions, length, width, thickness, and both the volumetric mass and the thousand-schizocarp mass were measured. Geometric properties (geometric mean diameter, sphericity index, specific mass and surface area) and gravitational parameters (bulk density, true density, and porosity) were calculated for each accession. Heritability (broad sense), phenotypic and genetic variabilities are also assessed. The average values of the evaluated parameters were found to be significantly different (p < 0.01) between accessions. The physical characteristics of schizocarps were significantly influenced by their origin, cultivated provinces and irrigation methods. Length, width, thickness and length of style range on average from 5.7 to 6.8 mm, 1.5 to 2.5 mm, 1.2 to 1.8 mm and 0.6 to 0.9 mm, respectively. Local and Egyptian accessions were the best-sized accessions. Regarding the weight, the Indian accession C11 registered the best volumetric mass 52.9 g, while the thousand-mass was found to be higher in the local accession from Zagora C19 with 7.3 g. The results showed that the phenotypic coefficient of variation (PCV) was higher than the genotypic coefficient of variation (GCV). The highest PCV and GCV were length of style (30.0%) and true density (24.4%), respectively. Volumetric mass had the highest value of heritability (99%). PCA analysis of seed origin showed clearly the ordination of cumin schizocarps into three groups. The big-sized schizocarps group is composed of local and Egyptian accessions, while the Saudi Arabia accession was individualized in a single group. Regarding the cultivated zone in Morocco, the ordination of schizocarps according to the province revealed four distinct groups. Finally, this study showed that irrigation mode may also affect the physical properties of cumin schizocarps.

Evaluating the adoption of irrigation technology in a well-irrigated winter wheat－summer maize cropping system

Determining suitable irrigation technology is of paramount for promoting water-saving agriculture, particularly for winter wheat-summer maize rotation system in well-irrigated regions. To optimize and assess the efficacy of various irrigation technologies (specifically, semi-fixed sprinkler irrigation, walking sprinkler, semi-automatic buried telescopic sprinkler irrigation, thin-soft spray tape irrigation, drip irrigation, self-driven winch sprinkler and manually moving spray gun irrigation, marked as A, B, C, D, E, F and G) applied in south central North China Plain, we first conducted an economic analysis for the winter wheat-summer maize rotation. Subsequently, employing a comprehensive set of 20 indicators spanning economic, societal, technological, ecological, and resource aspects, we employed a TOPSIS model with integrative weighting approach using “AHP + Entropy”. We also employed principal component analysis and the Sankey diagram method to explore characteristics of different irrigation techniques and indexes. Irrigation mode E, conserving energy by 63.19% compared to mode B and offering labor savings five times greater than the mode D. The highest economic benefit for the rotation system was observed with the mode C, resulting in a 25.26% increase compared to the mode G. The top three irrigation modes based on scores were D, G, and E, with scores of 0.532, 0.490, and 0.474, respectively. The Sankey diagram revealed distinct preferences among different agricultural entities for specific irrigation modes. For specific stakeholders, we recommend irrigation modes D, G, F, and B for small farmers, large and specialized family businesses, family farms, and farmer cooperatives, respectively. In conclusion, our findings provide valuable scientific support and recommendations for the practical application of irrigation technology in agricultural production.

The first experience of the abdominal VAC- therapy application on role II medical support of combat actions

Purpose. To conduct an analysis of the first experience of using abdominal VAC therapy during the implementation of Damage Control Surgery (DCS) tactics in the treatment of combat surgical abdominal trauma during large-scale combat operations.&#x0D; Material and methods. An analysis of the use of abdominal VAC therapy in the conditions of the advanced surgical group of the Military Mobile Hospital at the Role II of medical support in 45 wounded with penetrating gunshot wounds to the abdomen and damage to internal organs was carried out.&#x0D; Results. The paper describes the injuries of the abdominal organs in the case of a combat surgical injury of the abdomen, which underwent abdominal VAC therapy at the Role II of medical care. The technique of using abdominal VAC therapy in the irrigation mode is described in detail, with the specifics of its implementation for various injuries. The features of performing abdominal VAC therapy during the evacuation of the wounded are highlighted. The purpose of abdominal VAC therapy at the Role II of MS in the conditions of large-scale combat operations, indications, contraindications to its use and the peculiarities of its implementation in combat surgical abdominal trauma are summarized. &#x0D; Conclusions. Abdominal VAC therapy for combat surgical injury of the abdomen is the optimal way to temporarily close the abdominal cavity at the end of the I phase of the DCS tactics at the Role II of combat medical support, which allows you to remove pathological exudate effectively from the abdominal cavity and rehabilitate it (including during medical evacuation to the next level of medical care ) and is preparation for performing reconstructive operations and final closure of the abdominal cavity in the III phase DCS tactics.

Comparison of temperature and renal tissue thermal damage by holmium laser with different energy parameters during lithotripsy: in vitro porcine kidney model.

Holmium laser percutaneous nephrolithotripsy was simulated by porcine kidney calculus model in vitro to investigate thermal damage of renal tissue by different energy parameters of the holmium laser. We placed human kidney calculus specimen in fresh vitro porcine kidney, then insert thermocouple temperature probes into the submucosa of the renal pelvis and reheated in a 37°C water bath. A percutaneous nephrological sheath was used to penetrate the renal parenchyma with a moderate irrigation rate of 30ml/min at 18℃. The Holmium laser was used to fragment the stones under a nephroscope, and the temperature was recorded. The four independent models were lithotripsy with 30W and 60W laser for 5 and 10min, respectively; the mean temperature of 30W vs. 60W within 5min was 36.06°C vs. 39.21°C (t = 5.36, P < 0.01) and the highest temperature was 43.60°C vs. 46.60°C; the mean temperature of 30W vs. 60W within 10min was 37.91°C vs. 40.13℃ (t = 5.28, P < 0.01), maximum temperature 46.80℃ vs. 49.20℃. Pathologically, each kidney was observed to have different degrees of thermal damage lesions, and the higher power and longer time the more severe the injury, but the injury was mainly limited to the uroepithelial and subepithelial tissues, with rare damage to renal tubules. The higher laser excitation power and longer duration raised the intrarenal temperature significantly and caused a certain degree of thermal damage to the kidney tissue, but overall it was found to be safe and reliable. Urologists can avoid further side effects through surgical expertise.

Sweet potato yield and quality characteristics affected by different late-season irrigation levels.

Seasonal late-season water deficits negatively affect the yield and quality of sweet potatoes in northern China. However, the amount of late-season irrigation to achieve high yield and consistent quality storage root remains undetermined. We assessed the yield and some qualitative traits of sweet potatoes such as size, shape, skin/flesh colour and nutritional content, as influenced by five irrigation levels (T0: unirrigated control; T1: 33% ETc; T2: 75% ETc; T3: 100% ETc; and T4: 125% ETc). Late-season irrigation significantly increased yield and marketable yield. Yields for T2 and T3 were significantly higher than other treatments, whereas T2 had the highest Grade A rating in a 2-year test. The vertical length of storage roots gradually increased with an increase in irrigation level, whereas the maximum width remained unchanged. The proportion of long elliptic and elliptic storage roots also increased, whereas the proportion of ovate, obovate and round storage roots gradually decreased. The skin and flesh colours became more vivid as the level of irrigation increased, with the skin colour becoming redder and the flesh colour becoming more orange-yellow. The levels of carotenoids, vitamin C and soluble sugar were significantly higher in irrigated crops, with the highest vitamin C and soluble sugar levels in T2 and the highest carotenoid levels in T3 treatment. Taken together, these results demonstrate the potential of moderate irrigation in the late-season to improve both yield production and quality potential. The results are of great importance for improving the market value of sweet potatoes and increasing grower profits. © 2024 Society of Chemical Industry.

The Scheme Assessment on the Quality of Growth and Development of Cotton under Different Irrigation Modes in the Arid Area, China

The Scheme Assessment on the Quality of Growth and Development of Cotton under Different Irrigation Modes in the Arid Area, China

Effects of irrigation and fertilization on the emission factors and emission intensities of nitrous oxide in alkaline soil

Environmental damage attributed to nitrous oxide (N2O) emissions have received widespread attention. Agricultural sources release substantial amounts of N2O into the atmosphere. However, comparative studies on the effects of different irrigation and fertilization methods, namely, drip fertigation (a combination of fertilizing and irrigation), sprinkler fertigation, and traditional furrow irrigation with chemical fertilizer spraying, on N2O emissions in alkaline soil have been limited. Therefore, three-year in situ field observations were conducted to investigate the effect of these three irrigation and fertilization modes on N2O emissions using the static chamber method over the period 2015–2017. There are significant seasonal variations in soil N2O emission fluxes among alkaline soils under different fertilization and irrigation modes, with emissions peaking in July and August, but no significant difference in yearly variations. The N2O emission intensity of drip fertigation soil was 0.20 kg N t−1 year−1, of sprinkler fertigation soil was 0.38 kg N t−1 year−1, respectively, while of furrow irrigation was 0.91 kg N t−1 year−1, respectively. Moisture and temperature of soil were key factors driving the observed nitrous oxide variations. Compared with traditional furrow irrigation, drip and sprinkler fertigation significantly increased potato yield and decreased N2O emissions in alkaline soil, thus satisfying both yield and environmental protection.