Modeling Performance Research Articles

Esports Training, Periodization, and Software—A Scoping Review

Electronic sports (esports) and research on this emerging field are interdisciplinary in nature. By extension, it is essential to understand how to standardize and structure training with the help of existing tools, developed over years of research in sports sciences and informatics. Our goal for this work is to review the available literature in esports research, focusing on sports sciences (training, periodization, planning, and career stages) and software (training tools, visualization, analytics, and feedback systems). To verify the existing sources, we applied the framework of a scoping review to address the search from multiple scientific databases with further local processing. We conclude that the current research on esports has mainly focused on describing and modeling performance metrics that span over multiple fragmented research areas (psychology, nutrition, informatics). However, these building blocks have not been assembled into a well-functioning theory of performance in esports by, e.g., providing exercise regimes or methods of periodization for esports.

Adapting generalized suitability curves from Brown trout to Minnow using 1D and 2D aquatic habitat models

The article focuses on adapting generalized depth preference and flow velocity characteristics from Brown trout (Salmo trutta morpha fario) to the Minnow (Phoxinus phoxinus). The results obtained were used to model habitat suitability with 1D and 2D models. Since 1995, research on assessing aquatic habitat quality has been ongoing on 77 mountain streams in Slovakia. This assessment employs a System of Environmental Flow Analysis (SEFA), which is based on the Instream Flow Incremental Methodology (IFIM). In most sections, Brown trout occurred in representative numbers. Brown trout habitat preferences were derived and generalized, and represented by suitability curves. Minnows were present in sufficient numbers for the derivation of suitability curves only on some streams, making direct generalization from the measured data unrepresentative. The measurement results showed that Minnow has similar depth and flow rate preferences to Brown trout. Therefore, it can be assumed that it is possible to adapt the generalised suitability curves from Brown trout to Minnow. This expansion enabled us to broaden the assessment of habitat quality using the SEFA model to mountain streams that are dominated by Minnows and where there is insufficient Brown trout presence. Verification of parameter adaptation from Brown trout to Minnow was conducted in 11 sections of mountain streams. We discuss the performance of habitat quality modeling, concerning the fundamental hydraulic characteristics of streams, using both 1D and 2D models. The results of the 2D modeling are presented for a sub-mountain stream.

Embroidered Transmission Lines with Conductive Yarns: Challenges, Modeling, Fabrication, and Experimental Performance Assessment

This paper presents an enhanced measurement technique for evaluating embroidered transmission lines (TLs), based on a TL characterization method. The evaluation metric is the “pure” losses of the embroidered TL excluding mismatch losses. Enhanced mechanical stability and removability of embroidered samples under a test is supported by a specially designed measurement setup. Losses are used to find the effective conductivity of each embroidery pattern. Various embroidered samples are fabricated, measured, and evaluated. The repeatability of measurements and fabrication are analyzed and assessed, resulting in average deviations of 0.5 dB and 0.7 dB, respectively. A comparative evaluation of two different yarns of low and high conductivity is presented. Single and double stitching patterns for each yarn are manufactured with stitch densities of 1–7 lines/mm. For interconnection with SMA connectors, a conductive fabric contact (CFC) was selected as the finish of the TL, as a more practical interface instead of direct yarn contact (YC). The analysis of the measurements proved useful findings, such as an increase in the stitch density or the amount of yarn used does not always improve the performance; the use of double stitching greatly improves low-performance stitch densities; the effective conductivity of embroidery patterns changes with frequency; the YC interface yields more losses for medium stitch densities, but for higher stich densities, it presents an improved performance compared with the CFC interconnection.

MODIS Evapotranspiration Forecasting Using ARIMA and ANN Approach at a Water-Stressed Irrigation Scheme in South Africa

The forecasting of evapotranspiration (ET) in some water-stressed regions remains a major challenge due to the lack of reliable and sufficient historical datasets. For efficient water balance, ET remains the major component and its proper forecasting and quantifying is of the utmost importance. This study utilises the 18-year (2001 to 2018) MODIS ET obtained from a drought-affected irrigation scheme in the Eastern Cape Province of South Africa. This study conducts a teleconnection evaluation between the satellite-derived evapotranspiration (ET) time series and other related remotely sensed parameters such as the Normalised Difference Vegetation Index (NDVI), Normalised Difference Water Index (NDWI), Normalised Difference Drought Index (NDDI), and precipitation (P). This comparative analysis was performed by adopting the Mann–Kendall (MK) test, Sequential Mann–Kendall (SQ-MK) test, and Multiple Linear Regression methods. Additionally, the ET detailed time-series analysis with the Keiskamma River streamflow (SF) and monthly volumes of the Sandile Dam, which are water supply sources close to the study area, was performed using the Wavelet Analysis, Breaks for Additive Seasonal and Trend (BFAST), Theil–Sen statistic, and Correlation statistics. The MODIS-obtained ET was then forecasted using the Autoregressive Integrated Moving Average (ARIMA) and Artificial Neural Networks (ANNs) for a period of 5 years and four modelling performance evaluations such as the Root Mean Square Error (RMSE), Mean Absolute Percentage Error (MAPE), Mean Absolute Error (MAE), and the Pearson Correlation Coefficient (R) were used to evaluate the model performances. The results of this study proved that ET could be forecasted using these two time-series modeling tools; however, the ARIMA modelling technique achieved lesser values according to the four statistical modelling techniques employed with the RMSE for the ARIMA = 37.58, over the ANN = 44.18; the MAE for the ARIMA = 32.37, over the ANN = 35.88; the MAPE for the ARIMA = 17.26, over the ANN = 24.26; and for the R ARIMA = 0.94 with the ANN = 0.86. These results are interesting as they give hope to water managers at the irrigation scheme and equally serve as a tool to effectively manage the irrigation scheme.

An Efficient Attentive-GRU Structure for Uncertainty Modelling of Crowdsourced Human Trajectories Under Building-obscured Urban Scenes

Abstract. Uncertainty modelling is regarded as one of the core components in the field of human mobility analysis and urban navigation, that can affect the performance of human behaviour modelling and location information acquisition. Existing uncertainty modelling algorithms towards the human movement trajectory are subjected to random and highly dynamic human motion characteristics and sampling and observation errors of Global Navigation Satellite System (GNSS) signals caused by the occlusion of buildings in urban scenes, which lead to the insufficient spatiotemporal correlation and poor accuracy of uncertainty modelling. To fill in this gap, this paper proposes an efficient attentive-GRU structure for uncertainty modelling of crowdsourced human trajectories under building-obscured urban scenes, that takes into account both temporal correlation and spatial correlation of human-originated GNSS trajectories and related motion features. A period of human motion data is modelled instead of only one or adjacent location points to avoid interference factors caused by the obstruction of urban buildings, and time-varying measurement and sampling errors are further estimated and combined with comprehensive human motion features to improve the accuracy of final uncertainty modelling. Comprehensive experiments indicate that compared with existing uncertainty modelling methods including physical models and deep-learning models, the proposed attentive-GRU structure realizes much better performance under different accuracy indexes.

Multi-scale modeling and mechanical performance analysis of finger seals with plain woven C/C composite

The application of carbon fibers reinforced carbon matrix (C/C) composite can solve the local wear of metallic finger seals effectively. However, the performance of C/C composite finger seal is complex and variable, which further decreases the sealing performance and life. Therefore, a method of multi-scale modeling and mechanical performance analysis for plain woven C/C composite finger seals was conducted. The circumferential finger beams of C/C composite were modeled by multi-scale structural analysis and weaving simulation. The radial static and dynamic stiffness characteristics of finger beams were investigated. The results showed that the radial static stiffness of the finger beam with three layers was about 3 times that with single layer. The radial stiffness of circumferential finger beams presented a periodic distribution pattern with a period of 90°. The radial dynamic stiffness of C/C composite finger beams increased with the excitation displacement amplitude and rotor speed. But the magnitude and fluctuation degree of dynamic stiffness were greater than those of static stiffness. A large difference in radial stiffness will lead to local wear and hysteretic leakage. This study lays a foundation for the analysis and optimization of the hysteresis and wear characteristics of C/C composite finger seals.

Contrasting Historical and Physical Perspectives in Asymmetric Catalysis: ΔΔG≠ versus Enantiomeric Excess

AbstractWith the rise of machine learning (ML), the modeling of chemical systems has reached a new era and has the potential to revolutionize how we understand and predict chemical reactions. Here, we probe the historic dependence on utilizing enantiomeric excess (ee) as a target variable and discuss the benefits of using relative Gibbs free activation energies (ΔΔG≠), grounded firmly in transition‐state theory, emphasizing practical benefits for chemists. This perspective is intended to discuss best practices that enhance modeling efforts especially for chemists with an experimental background in asymmetric catalysis that wish to explore modelling of their data. We outline the enhanced modeling performance using ΔΔG≠, escaping physical limitations, addressing temperature effects, managing non‐linear error propagation, adjusting for data distributions and how to deal with unphysical predictions,in order to streamline modeling for the practical chemist and provide simple guidelines to strong statistical tools. For this endeavor, we gathered ten datasets from the literature covering very different reaction types. We evaluated the datasets using fingerprint‐, descriptor‐, and graph neural network‐based models. Our results highlight the distinction in performance among varying model complexities with respect to the target representation, emphasizing practical benefits for chemists.

Contrasting Historical and Physical Perspectives in Asymmetric Catalysis: ▵▵G≠ versus Enantiomeric Excess.

With the rise of machine learning (ML), the modeling of chemical systems has reached a new era and has the potential to revolutionize how we understand and predict chemical reactions. Here, we probe the historic dependence on utilizing enantiomeric excess (ee) as a target variable and discuss the benefits of using relative Gibbs free activation energies (ΔΔG≠), grounded firmly in transition-state theory, emphasizing practical benefits for chemists. This perspective is intended to discuss best practices that enhance modeling efforts especially for chemists with an experimental background in asymmetric catalysis that wish to explore modelling of their data. We outline the enhanced modeling performance using ΔΔG≠, escaping physical limitations, addressing temperature effects, managing non-linear error propagation, adjusting for data distributions and how to deal with unphysical predictions,in order to streamline modeling for the practical chemist and provide simple guidelines to strong statistical tools. For this endeavor, we gathered ten datasets from the literature covering very different reaction types. We evaluated the datasets using fingerprint-, descriptor-, and graph neural network-based models. Our results highlight the distinction in performance among varying model complexities with respect to the target representation, emphasizing practical benefits for chemists.

Multi-Layer Perceptron and Radial Basis Function Networks in Predictive Modeling of Churn for Mobile Telecommunications Based on Usage Patterns

Customer retention is a key priority for mobile telecommunications companies, as acquiring new customers is significantly more costly than retaining existing ones. A major challenge in this field is predicting customer churn—users discontinuing services. Traditional predictive models such as rule-based systems often struggle with the complex, non-linear nature of customer behavior. To address this, we propose the use of deep learning techniques, specifically multi-layer perceptron (MLP) and radial basis function (RBF) networks, to improve the accuracy of churn predictions. However, while neural networks excel in predictive performance, they are often criticized for being “black-box” models, lacking interpretability. A real-world data set is considered, which originally contained information about 15,000 randomly selected clients. Various network structures and configurations are analyzed. The obtained results are compared with results generated using fuzzy rule-based and rough-set rule-based systems. The MLP model achieved an almost perfect accuracy of 0.999 with an F-measure of 0.989, outperforming traditional methods such as fuzzy rule-based and rough-set systems. Although the RBF model slightly lagged in accuracy, it demonstrated a superior recall of 0.993, indicating better identification of potential churners. These results demonstrate that neural network models significantly enhance predictive performance in churn modeling. The interpretability of the model is also discussed since it bears significance in real applications. Our contribution lies in showing that deep learning methods significantly enhance churn prediction accuracy, though the challenge of model interpretability remains a critical area for future work.

Kinodynamic Model-Based UAV Trajectory Optimization for Wireless Communication Support of Internet of Vehicles in Smart Cities

Unmanned aerial vehicles (UAVs) are utilized for wireless communication support of Internet of Intelligent Vehicles (IoVs). Intelligent vehicles (IVs) need vehicle-to-vehicle (V2V) and vehicle-to-everything (V2X) wireless communication for real-time perception knowledge exchange and dynamic environment modeling for safe autonomous driving and mission accomplishment. UAVs autonomously navigate through dense urban areas to provide aerial line-of-sight (LoS) communication links for IoVs. Real-time UAV trajectory design is required for minimum energy consumption and maximum channel performance. However, this is multidisciplinary research including (1) dynamic-aware kinematic (kinodynamic) planning by considering UAVs’ motion and nonholonomic constraints; (2) channel modeling and channel performance improvement in future wireless networks (i.e., beyond 5G and 6G) that are limited to beamforming to LoS links with the aid of reconfigurable intelligent surfaces (RISs); and (3) real-time obstacle-free crash avoidance 3D trajectory optimization in dense urban areas by modeling obstacles and LoS paths in convex programming. Modeling and solving this multilateral problem in real-time are computationally prohibitive unless extensive computational and overhead processing costs are imposed. To pave the path for computationally efficient yet feasible real-time trajectory optimization, this paper presents UAV kinodynamic modeling. Then, it proposes a convex trajectory optimization problem with the developed linear kinodynamic models. The optimality and smoothness of the trajectory optimization problem are improved by utilizing model predictive control and quadratic state feedback control. Simulation results are provided to validate the methodology.

Higher-order nonlinear modeling and multi-modal performance of axially restrained diverse flexible shaft-disk assemblies

Flexible shaft-disk combinations are essential in engines, turbines, and machinery. Understanding their modal characteristics is vital for industry-wide performance, reliability, and safety. This study uses higher-order modeling and multi-modal analysis to grasp complex dynamics, especially with multiple disks of varied sizes. Employing Hamilton’s method and Galerkin’s technique, equations of motion are formulated and then utilized for multi-modal analysis considering structural nonlinearity. Various shaft-disk arrangements are analyzed, including disk number, size, position, and shaft material, to understand their impact on modal behavior. The findings reveal the substantial impact of disk count, sizes, and placements on modal dynamics and intricate vibration characteristics across diverse spinning speeds. This effect is accentuated by integrating higher-order modeling into multi-modal analysis. Notably, higher-order deformation enhances overall resilience capacity and imposes more effective vibration restrictions than the linear approach. Furthermore, the investigation explores how different shaft materials influence modal characteristics, critical speeds, and vibration amplitudes in various shaft-disk combinations. Theoretical findings are validated using numerical results from 3D finite element-based models simulated with ANSYS 3D for accuracy. Ultimately, the study introduces a theoretical framework adaptable to numerous flexible shaft-disk combinations, offering a valuable resource for understanding and enhancing system behavior, benefiting engineers and researchers alike.

Diagnosis of systemic lupus erythematosus using cross-modal specific transfer fusion technology based on infrared spectra and metabolomics

BackgroundSystemic lupus erythematosus (SLE) is a chronic autoimmune disease. Currently, the medical diagnosis of SLE mainly relies on the clinical experience of physicians, and there is no universally accepted objective method for diagnosing SLE. Therefore, there is an urgent need to design an intelligent approach to accurately diagnose SLE to assist physicians in formulating appropriate treatment plans. With the rapid development of intelligent medical diagnostic technology, medical data is becoming increasingly multimodal. Multimodal data fusion can provide richer information than single-modal data, and the fusion of multiple modalities can effectively enhance the richness of data features to improve modeling performance. ResultsIn this paper, a cross-modal specific transfer fusion technique based on infrared spectra and metabolomics is proposed to effectively integrate infrared spectra and metabolomics by fully exploiting the intrinsic relationships between features across different modalities, thus achieving the diagnosis of SLE. In this research, a Decision Level Fusion module is also proposed to fuse the representations of two specific transfers further, obtaining the final prediction scores. Comprehensive experimental results demonstrate that the proposed method significantly improves the performance of SLE prediction, with accuracy and Area Under Curve (AUC) reaching 94.98 % and 97.13 %, respectively, outperforming existing methods. SignificanceOur framework effectively integrates infrared spectra and metabolomics to achieve a more accurate prediction of SLE. Our research indicates that prediction methods based on different modalities outperform those using single-modality data. The Cross-modal Specific Transfer Fusion module effectively captures the complex relationships within each single modality and models the complex relationships between different modalities.

Extended matrix modeling of integrated energy systems considering network dynamic characteristics and source–load uncertainty

A refined and efficient modeling approach is indispensable for enhancing the timeliness of scheduling strategies for the integrated energy system (IES). Non-flowing variables such as pressure and temperature introduced by energy devices, however, worsen the complexity while improving the completeness for models. Nonlinear and uncertain variables associated with network dynamic characteristics and source–load uncertainty in the systems seriously postpone the modeling processes. An extended matrix modeling approach is proposed in this paper to tackle such issues. New nodes, branches, definition rules and topological matrices are first presented to create an extended matrix model that is compatible with both flowing and non-flowing variables. To boost the modeling efficiency, adaptive piecewise linearization (APL) with extended matrix form and modified Taylor expansion are applied to approximate various nonlinear characteristics. The convex approximation based on Kullback–Leibler (KL) divergence and the strong duality theory characterized by Wasserstein distance are adopted to deal with uncertain variables, which adapt to combine with the above matrix model. A linearized matrix modeling framework applicable to highly automated by computers is thus established. The distributionally robust optimization (DRO) scheduling strategy is verified in a standard test system with the proposed modeling. The effect of dynamic characteristics and uncertain factors on the strategy is discussed. The results show that the extended matrix model simulates the response for real physical systems more effectively, which exhibits the better performances in modeling, objectives and scheduling strategies.

Dynamic Prediction for Pollutant Emissions of Coal-fired Power Plant Based on CNN-LSTM-Attention

Abstract The prediction accuracy of pollutant emissions by using traditional modeling methods is unsatisfactory in dynamic conditions. To overcome the problem, data-driven modeling was introduced to build the dynamic model of pollutant emissions of power plants in this paper. Combining with the running data of a 300MW circulating fluidized bed (CFB) unit, the dynamic prediction models of SO2 and NO x emissions were established respectively by using conventional neural network-long short-term memory and attention mechanism (CNN-LSTM-Attention). Moreover, LSSVM, LSTM and CNN-LSTM were introduced for comparison to demonstrate the superiority of CNN-LSTM-Attention model respectively. Simulation results indicate that model can imitate change trend of actual data with high accuracy over a long period of time. Compared with LSSVM, LSTM and CNN-LSTM, the proposed model has better modeling performance under different load conditions. This work provides certain guidance for the application of deep learning in the industrial field.

Exploring public attention in the circular economy through topic modelling with twin hyperparameter optimisation

To advance the circular economy (CE), it is crucial to gain insights into the evolution of public attention, cognitive pathways of the masses concerning circular products, and to identify primary concerns. To achieve this, we collected data from diverse platforms, including Twitter, Reddit, and The Guardian, and utilised three topic models to analyse the data. Given the performance of topic modelling may vary depending on hyperparameter settings, this research proposed a novel framework that integrates twin (single and multi-objective) hyperparameter optimisation for the CE. We conducted systematic experiments to ensure that topic models are set with appropriate hyperparameters under different constraints, providing valuable insights into the correlations between CE and public attention. In summary, our optimised model reveals that public remains concerned about the economic impacts of sustainability and circular practices, particularly regarding recyclable materials and environmentally sustainable technologies. The analysis shows that the CE has attracted significant attention on The Guardian, especially in topics related to sustainable development and environmental protection technologies, while discussions are comparatively less active on Twitter. These insights highlight the need for policymakers to implement targeted education programs, create incentives for businesses to adopt CE principles, and enforce more stringent waste management policies alongside improved recycling processes.

Dynamic modeling and real-time performance analysis of multi-product batch manufacturing systems with perishable products

Production lines handling perishable goods in industries such as petrochemical and food processing demand meticulous precision in timing. These systems are governed by stringent timeframes, where products must strictly adhere to defined residence times. Exceeding these time constraints leads to product scrapping, posing a significant threat to overall productivity. Modeling such intricate systems presents a formidable challenge, and success hinges upon a deep understanding of the complex interplay between production and batch scrapping dynamics. In response to this challenge, this paper presents a novel model for a multiproduct batch production line with perishable products. Furthermore, the real-time performance metric of Permanent Production Loss (PPL) is extended to this system using a method of PPL back-adjustment in time. To validate the fidelity of the proposed mathematical model, numerical case studies are conducted, comparing the developed model to a discrete event simulation. The results demonstrate that the model accurately represents the system at hand. The expressions for PPL evaluation and attribution are also validated using case studies.

Conceptual Water Main Failure Risk: Self-Excitation, Pipe Age, and Statistical Modeling Performance

Conceptual Water Main Failure Risk: Self-Excitation, Pipe Age, and Statistical Modeling Performance

A novel variable selection algorithm based on neural network for near-infrared spectral modeling

BackgroundPartial least squares (PLS) is a widely used technique for modeling spectral data. Researchers have developed numerous PLS-based variable selection algorithms to enhance model predictive ability and interpretability. In recent years, as neural network technology has advanced, these algorithms have been increasingly applied to spectral data modeling. However, current research on neural network modeling tends to prioritize network structure over variable selection. ResultsOur study introduces a neural network-based variable selection algorithm called VSNN (Variable Selection based on Neural Network). By iteratively eliminating unimportant variables using an exponentially decreasing function (EDF), the algorithm achieves the selection of variables in spectral data. VSNN can easily integrate different types of neural networks. In this study, we analyzed the impact of neural network types, activation functions, and variable importance vectors on algorithm performance. We tested the algorithm on four datasets: corn moisture, corn oil, tablets, and meat. The results indicate that VSNN significantly enhances the predictive ability of the model compared to partial least squares (PLS), neural networks (NN), and Joint Mutual Information Maximisation (JMIM). Specifically, non-linear activation functions markedly improve performance on non-linear meat datasets. Compared to PLS, the Root Mean Square Error of Prediction (RMSEP) values for the four datasets—corn moisture, corn oil, tablets, and meat—decreased from 0.0409, 0.0728, 3.97, and 3.2 to 0.002, 0.0236, 3.12, and 0.36, respectively, after applying the VSNN variable selection algorithm. SignificanceVSNN can serve as a versatile framework to enhance variable selection, modeling, and predictive performance by adapting neural network types and variable importance evaluation indicators. As machine learning technology advances, the strength of VSNN is poised to increase. This study highlights the potential of VSNN as an effective algorithmic framework for variable selection in spectroscopy applications.

Power modeling of degraded PV systems: Case studies using a dynamically updated physical model (PV-Pro)

Power modeling, widely applied for health monitoring and power prediction, is crucial for the efficiency and reliability of Photovoltaic (PV) systems. The most common approach for power modeling uses a physical equivalent circuit model, with the core challenge being the estimation of model parameters. Traditional parameter estimation either relies on datasheet information, which does not reflect the system's current health status, especially for degraded PV systems, or requires additional I-V characterization, which is generally unavailable for large-scale PV systems. Thus, we build upon our previously developed tool, PV-Pro (originally proposed for degradation analysis), to enhance its application for power modeling of degraded PV systems. PV-Pro extracts model parameters from production data without requiring I-V characterization. This dynamic model, periodically updated, can closely capture the actual degradation status, enabling precise power modeling. PV-Pro is compared with popular power modeling techniques, including persistence, nominal physical, and various machine learning models. The results indicate that PV-Pro achieves outstanding power modeling performance, with an average nMAE of 1.4 % across four field-degraded PV systems, reducing error by 17.6 % compared to the best alternative technique. Furthermore, PV-Pro demonstrates robustness across different seasons and severities of degradation. The tool is available as a Python package at https://github.com/DuraMAT/pvpro.

Enhanced Estimation of Crown-Level Leaf Dry Biomass of Ginkgo Saplings Based on Multi-Height UAV Imagery and Digital Aerial Photogrammetry Point Cloud Data

Ginkgo is a multi-purpose economic tree species that plays a significant role in human production and daily life. The dry biomass of leaves serves as an accurate key indicator of the growth status of Ginkgo saplings and represents a direct source of economic yield. Given the characteristics of flexibility and high operational efficiency, affordable unmanned aerial vehicles (UAVs) have been utilized for estimating aboveground biomass in plantations, but not specifically for estimating leaf biomass at the individual sapling level. Furthermore, previous studies have primarily focused on image metrics while neglecting the potential of digital aerial photogrammetry (DAP) point cloud metrics. This study aims to investigate the estimation of crown-level leaf biomass in 3-year-old Ginkgo saplings subjected to different nitrogen treatments, using a synergistic approach that combines both image metrics and DAP metrics derived from UAV RGB images captured at varying flight heights (30 m, 60 m, and 90 m). In this study, image metrics (including the color and texture feature parameters) and DAP point cloud metrics (encompassing crown-level structural parameters, height-related and density-related metrics) were extracted and evaluated for modeling leaf biomass. The results indicated that models that utilized both image metrics and point cloud metrics generally outperformed those relying solely on image metrics. Notably, the combination of image metrics obtained from the 60 m flight height with DAP metrics derived from the 30 m height significantly enhanced the overall modeling performance, especially when optimal metrics were selected through a backward elimination approach. Among the regression methods employed, Gaussian process regression (GPR) models exhibited superior performance (CV-R2 = 0.79, rRMSE = 25.22% for the best model), compared to Partial Least Squares Regression (PLSR) models. The common critical image metrics for both GPR and PLSR models were found to be related to chlorophyll (including G, B, and their normalized indices such as NGI and NBI), while key common structural parameters from the DAP metrics included height-related and crown-related features (specifically, tree height and crown width). This approach of integrating optimal image metrics with DAP metrics derived from multi-height UAV imagery shows great promise for estimating crown-level leaf biomass in Ginkgo saplings and potentially other tree crops.