Model Of Buck-boost Converter Research Articles

DSP Based Sliding Mode Control for Photovoltaic System

In this paper a new and simple DSP-based Sliding Mode Controller (SMC) has been developed for the Buck-Boost converter to get regulated DC power supply from solar PV. Firstly, all the control laws, such as reaching law, power rate reaching law, exponential reaching law, and sigmoid variable reaching law, are simulated for the efficient working of SMC. Then, these control laws have been programmed in DSP to make SMC controller for the Buck-Boost converter. Finally, a hardware model of buck-boost converter has been designed on PCB and programmed DSP has been utilized as SMC to get regulated DC supply from the solar panel to drive various industrial loads. The accuracy and performance of the proposed ‘DSP based SMC’ have been revealed by estimating various performance parameters, such as, chattering, load variation, controlled voltage, settling time, reaching time, and output voltage deviation. It is found that ‘DSP based SMC’ provides proficient performance with all of these reaching laws. Especially, with the exponential reaching law, the chattering magnitude and duration are found very small with minimum reaching time whereas sigmoid variable reaching law provides minimum settling time.

Design of a discrete PID controller based on identification data for a simscape buck boost converter model

<span>This work shows the design and tuning procedure of a discrete PID controller for regulating buck boost converter circuits. The buck boost converter model is implemented using Simscape Matlab library without having to derive a complex mathematical model. A new tuning process of digital PID controllers based on identification data has been proposed. Simulation results are introduced to examine the potentials of the designed controller in power electronic applications and validate the capability and stability of the controller under supply and load perturbations. Despite controller linearity, the new approach has proved to be successful even with highly nonlinear systems. The proposed controller has succeeded in rejecting all the disturbances effectively and maintaining a constant output voltage from the regulator.</span>

Low‐power non‐ideal pulse‐width modulated DC–DC buck–boost converter: design, analysis and experimentation

In this study, parasitic elements (non-idealities) effect on a low-power DC-DC buck-boost converter design is analysed and investigation is carried out by both large (i.e. steady-state) and small signal analysis. The large signal analysis of non-ideal buck-boost converter explored the significant information such as nearly accurate duty cycle, maximum allowable duty cycle and maximum possible output voltage. Further, accurate mathematical design formulae are derived of inductor and capacitor for specified inductor current ripple and output voltage ripple (OVR), respectively. Moreover, consequences of different equivalent series resistance of capacitor on OVR is examined. Subsequently, the exact model of buck-boost converter is procured from the small signal analysis, which is almost analogous to practical system. In order to show the impact of non-idealities on controller design, an internal model control PID controller is designed for ideal, semi-non-ideal and complete non-ideal systems based on their respective models, which shows the controller based on non-ideal model provides very close results to practical system. Conclusively, the complete theoretical explorations are justified by simulations and substantiated by experimental results.

Design and Implementation of Single Phase AC-DC Buck-Boost Converter for Power Factor Correction and Harmonic Elimination

<p class="Abstract"><span>This paper discusses the Power Factor Correction (PFC) for single phase ACDC Buck-Boost Converter (BBC) operated in Continuous Conduction Mode (CCM) using inductor average current mode control. The proposed control technique employs Proportional-Integral (PI) controller in the outer voltage loop and the Inductor Average Current Mode Control (IACMC) in the inner current loop for PFC BBC. The IACMC has advantages such as robustness when there are large variations in line voltage and output load. The PI controller is developed by using state space average model of BBC. The simulation of the proposed system with its control circuit is implemented in MatLab/Simulink. The simulation results show a nearly unity power factor can be attained and there is almost no change in power factor when the line frequency is at various ranges. Experimental results are provided to show its validity and feasibility. <br />Keyword</span></p>

Fractional Order Modeling and Analysis of Buck-Boost Converter

Considered the theoretical foundation of fractional order, the fractional mathematical model of the Buck-Boost converter in continuous conduction mode operation is built and analyzed in theory. Based on the improved Oustaloup fractional calculus for filter algorithm, the simulation model is framed by using the Matlab/Simulink software. And the simulation results are compared with that of integer order. It proves the correctness of the fractional order mathematical model and the theoretical analysis.

Modeling and Simulation of Buck-Boost Converter with Voltage Feedback Control

In order to design the control system, it is necessary to have an exact model of buck-boost converter. This paper put forward the transfer function model of buck-boost converter by the state-space average method. The open-loop transfer function model of uncompensated system is deduced according to the mathematic model of the buck-boost converter, the controller is designed according to frequency domain. The phase and magnitude margin of the open-loop system of the buck-boost converter with compensator have both been increased. After compensating, this control system has the advantages of small overshoot and short settling time. It can also improve control system’s real time property and anti-interference ability.

Modeling and Analysis of Transformerless High Gain Buck-boost DC-DC Converters

This paper proposes a transfomerless switched capacitor buck boost converter model, which provides higher voltage gain and higher efficiency when compared to the conventional buck boost converter. The averaged model based on state-space description is analyzed in the paper. The simulation results are presented to confirm the capability of the converter to generate high voltage ratios. The comparison between the proposed model and the traditional model is also provided to reveal the improvement. The proposed converter is suitable for for a wide application which requires high step-up DC-DC converters such as DC micro-grids and solar electrical energy.