Model Bacterial Membranes Research Articles

Exploring the Membrane-Active Interactions of Antimicrobial Long-Chain Fatty Acids Using a Supported Lipid Bilayer Model for Gram-Positive Bacterial Membranes.

The dynamic nature of bacterial lipid membranes significantly impacts the efficacy of antimicrobial therapies. However, traditional assay methods often fall short in replicating the complexity of these membranes, necessitating innovative approaches. Herein, we successfully fabricated model bacterially supported lipid bilayers (SLBs) that closely mimic the characteristics of Gram-positive bacteria using the solvent-assisted lipid bilayer (SALB) technique. By employing a quartz crystal microbalance with dissipation and fluorescence microscopy, we investigated the interactions between these bacterial mimetic membranes and long-chain unsaturated fatty acids. Specifically, linolenic acid (LNA) and linoleic acid (LLA) demonstrated interaction behaviors correlated with the critical micelle concentration (CMC) on Gram-positive membranes, resulting in membrane remodeling and removal at concentrations above their respective CMC values. In contrast, oleic acid (OA), while showing similar membrane remodeling patterns to LNA and LLA, exhibited membrane insertion and CMC-independent activity on the Gram-positive membranes. Particularly, LNA and LLA demonstrated bactericidal effects and promoted membrane permeability and ATP leakage in the bacterial membranes. OA, characterized by a CMC-independent activity profile, exhibited potent bactericidal effects due to its robust penetration into the SLBs, also enhancing membrane permeability and ATP leakage. These findings shed light on the intricate molecular mechanisms governing the interactions between long-chain unsaturated fatty acids and bacterial membranes. Importantly, this study underscores the potential of using biologically relevant model bacterial membrane systems to develop innovative strategies for combating bacterial infections and designing effective therapeutic agents.

Simulating Bacterial Membrane Models at the Atomistic Level: A Force Field Comparison.

Molecular dynamics (MD) simulations are currently an indispensable tool to understand both the dynamic and nanoscale organization of cell membrane models. A large number of quantitative parameters can be extracted from these simulations, but their reliability is determined by the quality of the employed force field and the simulation parameters. Much of the work on parametrizing and optimizing force fields for biomembrane modeling has been focused on homogeneous bilayers with a single phospholipid type. However, these may not perform effectively or could even be unsuitable for lipid mixtures commonly employed in membrane models. This work aims to fill this gap by comparing MD simulation results of several bacterial membrane models using different force fields and simulation parameters, namely, CHARMM36, Slipids, and GROMOS-CKP. Furthermore, the hydrogen isotope exchange (HIE) method, combined with GROMOS-CKP (GROMOS-H2Q), was also tested to check for the impact of this acceleration strategy on the performance of the force field. A common set of simulation parameters was employed for all of the force fields in addition to those corresponding to the original parametrization of each of them. Furthermore, new experimental order parameter values determined from NMR of several lipid mixtures are also reported to compare them with those determined from MD simulations. Our results reveal that most of the calculated physical properties of bacterial membrane models from MD simulations are substantially force field and lipid composition dependent. Some lipid mixtures exhibit nearly ideal behaviors, while the interaction of different lipid types in other mixtures is highly synergistic. None of the employed force fields seem to be clearly superior to the other three, each having its own strengths and weaknesses. Slipids are notably effective at replicating the order parameters for all acyl chains, including those in lipid mixtures, but they offer the least accurate results for headgroup parameters. Conversely, CHARMM provides almost perfect estimates for the order parameters of the headgroups but tends to overestimate those of the lipid tails. The GROMOS parametrizations deliver reasonable order parameters for entire lipid molecules, including multicomponent bilayers, although they do not reach the accuracy of Slipids for tails or CHARMM for headgroups. Importantly, GROMOS-H2Q stands out for its computational efficiency, being at least 3 times faster than GROMOS, which is already faster than both CHARMM and Slipids. In turn, GROMOS-H2Q yields much higher compressibilities compared to all other parametrizations.

Employing Metadynamics to Predict the Membrane Partitioning of Carboxy-2H-Azirine Natural Products.

Natural products containing the carboxy-2H-azirine moiety are an exciting target for investigation due to their broad-spectrum antimicrobial activity and new chemical space they afford for novel therapeutic development. The carboxy-2H-azirine moiety, including those appended to well-characterized chemical scaffolds, is understudied, which creates a challenge for understanding potential modes of inhibition. In particular, some known natural product carboxy-2H-azirines have long hydrophobic tails, which could implicate them in membrane-associated processes. In this study, we examined a small set of carboxy-2H-azirine natural products with varied structural features that could alter membrane partitioning. We compared the predicted membrane partitioning and alignment of these compounds to those of established membrane embedders with similar chemical scaffolds. To accomplish this, we developed parameters within the framework of the CHARMM36 force field for the 2H-azirine functional group and performed metadynamics simulations of the partitioning into a model bacterial membrane from aqueous solution. We determined that the carboxy-2H-azirine functional group is strongly hydrophilic, imbuing the long-chain natural products with amphipathicity similar to the known membrane-embedding molecules to which they were compared. For the long-chain analogs, the carboxy-2H-azirine head group stays within 1 nm of the phosphate layer, while the hydrophobic tail sits within the membrane. The carboxy-2H-azirine lacking the long alkyl chain instead partitions completely into aqueous solution.

How antimicrobial peptide indolicidin and its derivatives interact with phospholipid membranes: Molecular dynamics simulation

Infections by drug-resistant bacteria pose a growing threat to human health, so developing new antimicrobial drugs is becoming an increasingly urgent requirement. Antimicrobial peptides are an important part of the innate immune system of many organisms, which have a broad spectrum of antimicrobial activity and little likelihood to trigger resistance, so they are considered good candidates for developing new antimicrobial drugs. In this paper, the interaction of indolicidin (IR13) and its derived peptides CP10A, CP-11 and cycloCP-11 with Gram-negative bacterial model membranes is investigated using coarse-grained molecular dynamics approach. The aim is to analyse the behaviour of these antimicrobial peptides when interacting with Gram-negative bacterial membranes. The widely studied phospholipid bilayer consisting of POPC and POPG is used as a Gram-negative bacterial membrane model in the simulations. The results show that the derived peptides CP-11 and cycloCP-11 are more active against Gram-negative bacteria than IR13 and CP10A. The dynamic behaviour of the four antimicrobial peptides on the membrane is different, and the peptide-membrane interactions induce changes in the thickness and surface area of the phospholipid bilayer, diminish membrane mobility, and so on. The present study provides important insights into the mechanism of interaction between antimicrobial peptides and phospholipid membranes by analysing them at the molecular level, and is therefore informative for designing new derivative peptides.

Multifaceted Activity of Fabimycin: Insights from Molecular Dynamics Studies on Bacterial Membrane Models.

Membranes─cells' essential scaffolds─are valid molecular targets for substances with an antimicrobial effect. While certain substances, such as octenidine, have been developed to target membranes for antimicrobial purposes, the recently reported molecule, fabimycin (F2B)─a novel agent targeting drug-resistant Gram-negative bacteria─has not received adequate attention regarding its activity on membranes in the literature. The following study aims to investigate the effects of F2B on different bacterial membrane models, including simple planar bilayers and more complex bilayer systems that mimic the Escherichia coli shell equipped with double inner and outer bilayers. Our results show that F2B exhibited more pronounced interactions with bacterial membrane systems compared to the control PC system. Furthermore, we observed significant changes in local membrane property homeostasis in both the inner and outer membrane models, specifically in the case of lateral diffusion, membrane thickness, and membrane resilience (compressibility, tilt). Finally, our results showed that the effect of F2B differed in a complex system and a single membrane system. Our study provides new insights into the multifaceted activity of F2B, demonstrating its potential to disrupt bacterial membrane homeostasis, indicating that its activity extends the currently known mechanism of FabI enzyme inhibition. This disruption, coupled with the ability of F2B to penetrate the outer membrane layers, sheds new light on the behavior of this antimicrobial molecule. This highlights the importance of the interaction with the membrane, crucial in combating bacterial infections, particularly those caused by drug-resistant strains.

Insights into Molecular Interactions between a GAPDH-Related Fish Antimicrobial Peptide, Analogs Thereof, and Bacterial Membranes.

Interactions between SJGAP (skipjack tuna GAPDH-related antimicrobial peptide) and four analogs thereof with model bacterial membranes were studied using Fourier-transform infrared spectroscopy (FTIR) and molecular dynamics (MD) simulations. MD trajectory analyses showed that the N-terminal segment of the peptide analogs has many contacts with the polar heads of membrane phospholipids, while the central α helix interacts strongly with the hydrophobic core of the membranes. The peptides also had a marked influence on the wave numbers associated with the phase transition of phospholipids organized as liposomes in both the interface and aliphatic chain regions of the infrared spectra, supporting the interactions observed in the MD trajectories. In addition, interesting links were found between peptide interactions with the aliphatic chains of membrane phospholipids, as determined by FTIR and from the MD trajectories, and the membrane permeabilization capacity of these peptide analogs, as previously demonstrated. To summarize, the combined experimental and computational efforts have provided insights into crucial aspects of the interactions between the investigated peptides and bacterial membranes. This work thus makes an original contribution to our understanding of the molecular interactions underlying the antimicrobial activity of these GAPDH-related antimicrobial peptides from Scombridae.

The Synthetic Peptide LyeTx I mn∆K, Derived from Lycosa erythrognatha Spider Toxin, Is Active against Methicillin-Resistant Staphylococcus aureus (MRSA) In Vitro and In Vivo.

The urgent global health challenge posed by methicillin-resistant Staphylococcus aureus (MRSA) infections demands effective solutions. Antimicrobial peptides (AMPs) represent promising tools of research of new antibacterial agents and LyeTx I mn∆K, a short synthetic peptide based on the Lycosa erythrognatha spider venom, is a good representative. This study focused on analyzing the antimicrobial activities of LyeTx I mn∆K, including minimum inhibitory and bactericidal concentrations, synergy and resensitization assays, lysis activity, the effect on biofilm, and the bacterial death curve in MRSA. Additionally, its characterization was conducted through isothermal titration calorimetry, dynamic light scattering, calcein release, and finally, efficacy in a mice wound model. The peptide demonstrates remarkable efficacy against planktonic cells (MIC 8-16 µM) and biofilms (>30% of inhibition) of MRSA, and outperforms vancomycin in terms of rapid bactericidal action and anti-biofilm effects. The mechanism involves significant membrane damage. Interactions with bacterial model membranes, including those with lysylphosphatidylglycerol (LysylPOPG) modifications, highlight the versatility and selectivity of this compound. Also, the peptide has the ability to sensitize resistant bacteria to conventional antibiotics, showing potential for combinatory therapy. Furthermore, using an in vivo model, this study showed that a formulated gel containing the peptide proved superior to vancomycin in treating MRSA-induced wounds in mice. Together, the results highlight LyeTx I mnΔK as a promising prototype for the development of effective therapeutic strategies against superficial MRSA infections.

Interactions of Galloylated Polyphenols with a Simple Gram-Negative Bacterial Membrane Lipid Model.

Differential scanning calorimetry (DSC) was used to explore the interactions of isolated polyphenolic compounds, including (-)-epigallocatechin gallate ((-)-EGCg), tellimagrandins I and II (Tel-I and Tel-II), and 1,2,3,4,6-penta-O-galloyl-d-glucose (PGG), with a model Gram-negative bacterial membrane with a view to investigating their antimicrobial properties. The model membranes comprised 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) and 1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DPPG), fabricated to mimic the domain formation observed in natural membranes, as well as ideally mixed lipid vesicles for the interaction with (-)-EGCg. Polyphenols induced changes in lipid mixing/de-mixing depending on the method of vesicle preparation, as was clearly evidenced by alterations in the lipid transition temperatures. There was a distinct affinity of the polyphenols for the DPPG lipid component, which was attributed to the electrostatic interactions between the polyphenolic galloyl moieties and the lipid headgroups. These interactions were found to operate through either the stabilization of the lipid headgroups by the polyphenols or the insertion of the polyphenols into the membrane itself. Structural attributes of the polyphenols, including the number of galloyl groups, the hydrophobicity quantified by partition coefficients (logP), and structural flexibility, exhibited a correlation with the temperature transitions observed in the DSC measurements. This study furthers our understanding of the intricate interplay between the structural features of polyphenolic compounds and their interactions with model bacterial membrane vesicles towards the exploitation of polyphenols as antimicrobials.

Biophysical studies of novel antimicrobial peptides perturbing bacterial and eukaryotic lipid model membranes

Biophysical studies of novel antimicrobial peptides perturbing bacterial and eukaryotic lipid model membranes

Bacterial model membranes under the harsh subsurface conditions of Mars.

Biomembranes are a key component of all living systems. Most research on membranes is restricted to ambient physiological conditions. However, the influence of extreme conditions, such as the deep subsurface on Earth or extraterrestrial environments, is less well understood. The deep subsurface of Mars is thought to harbour high concentrations of chaotropic salts in brines, yet we know little about how these conditions would influence the habitability of such environments. Here, we investigated the combined effects of high concentrations of Mars-relevant salts, including sodium and magnesium perchlorate and sulphate, and high hydrostatic pressure on the stability, structure, and function of a bacterial model membrane. To this end, several biophysical techniques have been employed, including calorimetry, fluorescence and CD spectroscopy, confocal microscopy, and small-angle X-ray scattering. We demonstrate that sulphate and perchlorate salts affect the properties of the membrane differently, depending on the counterion present (Na+vs. Mg2+). We found that the perchlorates, which are believed to be abundant salts in the Martian environment, induce a more hydrated and less ordered membrane, strongly favouring the physiologically relevant fluid-like phase of the membrane even under high-pressure stress. Moreover, we show that the activity of the phospholipase A2 is strongly modulated by both high pressure and salt. Compellingly, in the presence of the chaotropic perchlorate, the enzymatic reaction proceeded at a reasonable rate even in the presence of condensing Mg2+ and at high pressure, suggesting that bacterial membranes could still persist when challenged to function in such a highly stressed Martian environment.

Optimization of sequence and chiral content enhances therapeutic potential of tilapia piscidin peptides

Because antimicrobial peptides (AMPs) often exhibit broad-spectrum bactericidal potency, we sought to develop peptide-based antimicrobials for potential clinical use against drug-resistant pathogens. To accomplish this goal, we first optimized the amino acid sequence of a broad-spectrum AMP known as Tilapia Piscidin 4 (TP4). Then, we used the optimized sequence to create a pair of heterochiral variants (TP4-α and TP4-β) with different percentages of D-enantiomers, as poly-L peptides often exhibit poor pharmacokinetic profiles. The conformations of the peptide pair exhibited inverted chirality according to CD and NMR spectroscopic analyses. Both heterochiral peptides displayed enhanced stability and low hemolysis activities. Irrespective of their different d-enantiomer contents, both heterochiral peptides exhibited bactericidal activities in the presence of human serum or physiological enzymes. However, the peptide with higher d-amino acid content (TP4-β) caused better bacterial clearance when tested in mice infected with NDM-1 K. pneumoniae. In addition, we observed a relatively higher hydrogen bonding affinity in a simulation of the interaction between TP4-β and a model bacterial membrane. In sum, our results demonstrate that the current design strategy may be applicable for development of new molecules with enhanced stability and in vivo antimicrobial activity.

Bacterial extracellular vesicles: towards realistic models for bacterial membranes in molecular interaction studies by surface plasmon resonance.

One way to mitigate the ongoing antimicrobial resistance crisis is to discover and develop new classes of antibiotics. As all antibiotics at some point need to either cross or just interact with the bacterial membrane, there is a need for representative models of bacterial membranes and efficient methods to characterize the interactions with novel molecules -both to generate new knowledge and to screen compound libraries. Since the bacterial cell envelope is a complex assembly of lipids, lipopolysaccharides, membrane proteins and other components, constructing relevant synthetic liposome-based models of the membrane is both difficult and expensive. We here propose to let the bacteria do the hard work for us. Bacterial extracellular vesicles (bEVs) are naturally secreted by Gram-negative and Gram-positive bacteria, playing a role in communication between bacteria, as virulence factors, molecular transport or being a part of the antimicrobial resistance mechanism. bEVs consist of the bacterial outer membrane and thus inherit many components and properties of the native outer cell envelope. In this work, we have isolated and characterized bEVs from one Escherichia coli mutant and three clinical strains of the ESKAPE pathogens Klebsiella pneumoniae, Acinetobacter baumannii, and Pseudomonas aeruginosa. The bEVs were shown to be representative models for the bacterial membrane in terms of lipid composition with speciesstrain specific variations. The bEVs were further used to probe the interactions between bEV and antimicrobial peptides (AMPs) as model compounds by Surface Plasmon Resonance (SPR) and provide proof-of-principle that bEVs can be used as an easily accessible and highly realistic model for the bacterial surface in interaction studies. This further enables direct monitoring of the effect induced by antibiotics, or the response to host-pathogen interactions.

Synthesis, structure and biological evaluation as antibacterial agents of Ru(II)-p-cymene-aryldicyclohexylphosphine complexes

The syntheses of two neutral complexes with formula [Ru(η6-p-cymene)(P(Cy)2Ar)Cl2], where P(Cy)2Ar = dicyclohexylphosphine, Ar = Ph (1) and 4-(N,N-dimethylamino)phenyl (4-dma-ph) (2) were performed. Both complexes were fully characterized by molar conductivity, elemental analysis and spectroscopic methods. The molecular structures of 1 and 2 that were elucidated by single crystal X-ray diffraction show that both structures adopt the pseudo-octahedral geometry characteristic of organoruthenium species. Absorption spectra and electrochemical behavior of the complexes were also evaluated and their results were supported by DFT analysis. Both complexes were active against tested bacterial strains: Gram-positive (Staphylococcus aureus) and three species Gram-negative (Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa). 2 shows higher bacterial growth inhibition activity compared to 1, which might be due to its molecular structure that could facilitate the interaction among this complex and the biological environment. These results agreed with the Langmuir monolayer and molecular docking studies. 1 and 2 change the pressure isotherms of 1,2-dioleoyl-sn-glycero-3-phosphatidylglycerol, a phospholipid used as a bacterial membrane model. Molecular Docking studies performed with S. aureus and E. Coli bacteria using the Topoisomerase IV (4URN) and DNA Gyrase as receptor (1KZN), showed that both complexes have potential antimicrobial effects compared to the ciprofloxacin.

Deciphering the Broad Antimicrobial Activity of Melaleuca alternifolia Tea Tree Oil by Combining Experimental and Computational Investigations.

Tea Tree Oil (TTO) is an essential oil obtained from the distillation of Melaleuca alternifolia leaves and branches. Due to its beneficial properties, TTO is widely used as an active ingredient in antimicrobial preparations for topical use or in cosmetic products and contains about 100 different compounds, with terpinen-4-ol, γ-terpinene and 1,8-cineole (or eucalyptol) being the molecules most responsible for its biological activities. In this work, the antimicrobial activity of whole TTO and these three major components was evaluated in vitro against fungi, bacteria and viruses. Molecular dynamics simulations were carried out on a bacterial membrane model and a Coxsackievirus B4 viral capsid, to propose an atomistic explanation of their mechanism of action. The obtained results indicate that the strong antimicrobial activity of TTO is attributable to the induction of an altered membrane functionality, mediated by the incorporation of its components within the lipid bilayer, and to a possible ability of the compounds to bind and alter the structural properties of the viral capsid.

Antimicrobial properties of the essential oil of Schinus areira (Aguaribay) against planktonic cells and biofilms of S. aureus

The essential oil (EO) of Schinus areira L. (Anacardiaceae) leaves has shown antibacterial activity against Staphylococcus aureus. In this study, we aimed to unravel the mechanisms of its antibacterial action by using bacterial cells and model membranes. First, the integrity of the S. aureus membrane was evaluated by fluorescence microscopy. It was observed that there was an increase in the permeability of cells that was dependent on the EO concentration as well as the incubation time. For a deep comprension of the action of the EO on the lipids, its effect on the membrane fluidity was evaluated on DMPC (1,2-dimyristoyl-sn-glycero-3-phosphocholine): DMPG (1,2-dimyristoyl-sn-glycero-3-phospho-1′-rac-glycerol) (5:1) liposomes by dynamic light scattering and by using Laurdan doped liposomes. The results indicate that EO produces changes in lipid membrane packing, increasing the fluidity, reducing the cooperative cohesive interaction between phospholipids and increasing access of water or the insertion of some components of the EO to the interior of the membrane. In addition, the potential effect of EO on intracellular targets, such as the increase of cytosolic reactive oxygen species (ROS) and DNA damage, were analyzed. The EO was capable of increasing the production of ROS as well as inducing a partial DNA degradation. Finally, the effect of EO on S. aureus biofilm was tested. These assays showed that EO was able to inhibit the biofilm formation, and also eradicate preformed biofilms. The results show, that the EO seems to have several bacterial targets involved in its antibacterial activity, from the bacterial membrane to DNA. Furthermore, the antibacterial action affects not only planktonic cells but also biofilms; reinforcing the potential application of this EO.

Investigating the Impact of the Glycolipid Content on Aurein 1.2 Pores in Prokaryotic Model Bilayers: A Coarse-Grain Molecular Dynamics Simulation Study.

Aurein 1.2 is an antimicrobial peptide (AMP) with known lytic activity against bacterial membranes. Our previous studies revealed a differential action of aurein by both experimental and computational methods. This differential action was over membranes of two related probiotic strains, where the main difference between membranes was the number of glycolipids in the lipid composition. In this work, we aimed to investigate the interaction of aurein 1.2 with model bacterial membranes of varying glycolipid content. To this end, we performed extensive molecular dynamics simulations using the MARTINI coarse-grain force field and differential mixtures of phosphatidylglycerol (PG), phosphatidylethanolamine (PE), and monogalactosylglycerol (MG). We found a correlation between the presence of MG in PG/PE mixtures and the difficulty of aurein to stabilize pore structures, suggesting an AMP-resistance factor encoded in the lipid composition of the membrane. These findings may shed light on a possible mechanism of bacterial resistance to AMPs that is related to the glycolipid content of bacterial membranes.

Influence of the Antimicrobial LL-37 Peptide on Legionella dumoffii Phospholipids Adsorbed at the Air–Liquid Interface

Legionella dumoffii is an intracellular pathogen of freshwater protozoans capable of infecting and multiplying in mammalian cells, causing a severe respiratory disease called Legionnaires’ disease. The pathomechanism of infection development is very complex and depends on many factors, including the structure and properties of macromolecules that build the components of the L. dumoffii cell envelope. Phospholipids (PLs) forming biological membranes have a significant impact on the integrity of the membrane as well as on the interactions with the host cells. L. dumoffii changes its lipid profile under the influence of external factors, which allows it to adapt to the living environment. One of the factors altering the PL composition is the presence of exogenous choline. The aim of this study was to determine the physicochemical properties of the model bacterial membranes adsorbed at the air–liquid interface (Langmuir monolayers). They were composed of phospholipids isolated from L. dumoffii cultured with (PL+choline) and without (PL−choline) choline. Moreover, the effect of the human cathelicidin (LL-37 peptide) added to the subphase on these monolayers was analyzed in terms of phospholipid–peptide interactions. The results indicated that the monolayers of PL+choline were slightly more condensed than PL−choline. In the presence of LL-37, the elasticity of both monolayers increased; thus, their molecular packing and ordering decreased. The disturbing effect was related to the peptide’s antibacterial activity.

Interaction of Uperin Peptides with Model Membranes: Molecular Dynamics Study

The interaction of antimicrobial and amyloid peptides with cell membranes is a critical step in their activities. Peptides of the uperin family obtained from the skin secretion of Australian amphibians demonstrate antimicrobial and amyloidogenic properties. All-atomic molecular dynamics and an umbrella sampling approach were used to study the interaction of uperins with model bacterial membrane. Two stable configurations of peptides were found. In the bound state, the peptides in helical form were located right under the head group region in parallel orientation with respect to the bilayer surface. Stable transmembrane configuration was observed for wild-type uperin and its alanine mutant in both alpha-helical and extended unstructured forms. The potential of mean force characterized the process of peptide binding from water to the lipid bilayer and its insertion into the membrane, and revealed that the transition of uperins from the bound state to the transmembrane position was accompanied by the rotation of peptides and passes through the energy barrier of 4-5 kcal/mol. Uperins have a weak effect on membrane properties.

Role of Lipid Packing Defects in Determining Membrane Interactions of Antimicrobial Polymers.

Understanding the emergence and role of lipid packing defects in the detection and subsequent partitioning of antimicrobial agents into bacterial membranes is essential for gaining insights into general antimicrobial mechanisms. Herein, using methacrylate polymers as a model platform, we investigate the effects of inclusion of various functional groups in the biomimetic antimicrobial polymer design on the aspects of lipid packing defects in model bacterial membranes. Two antimicrobial polymers are considered: ternary polymers composed of cationic, hydrophobic, and polar moieties and binary polymers with only cationic and hydrophobic moieties. We find that differing modes of insertion of these two polymers lead to different packing defects in the bacterial membrane. While insertion of both binary and ternary polymers leads to an enhanced number of deep defects in the upper leaflet, shallow defects are moderately enhanced upon interaction with ternary polymers only. We provide conclusive evidence that insertion of antimicrobial polymers in bacterial membrane is preceded by sensing of interfacial lipid packing defects. Our simulation results show that the hydrophobic groups are inserted at a single colocalized deep defect site for both binary and ternary polymers. However, the presence of polar groups in the ternary polymers use the shallow defects close to the lipid-water interface, in addition, to insert into the membrane, which leads to a more folded conformation of the ternary polymer in the membrane environment, and hence a different membrane partitioning mechanism compared to the binary polymer, which acquires an amphiphilic conformation.

The impact of N-glycosylation on the properties of the antimicrobial peptide LL-III

The misuse of antibiotics has led to the emergence of drug-resistant pathogens. Antimicrobial peptides (AMPs) may represent valuable alternative to antibiotics; nevertheless, the easy degradation due to environmental stress and proteolytic enzyme action, limits their use. So far, different strategies have been developed to overcome this drawback. Among them, glycosylation of AMPs represents a promising approach. In this work, we synthesized and characterized the N-glycosilated form of the antimicrobial peptide LL-III (g-LL-III). The N-acetylglucosamine (NAG) was covalently linked to the Asn residue and the interaction of g-LL-III with bacterial model membranes, together with its resistance to proteases, were investigated. Glycosylation did not affect the peptide mechanism of action and its biological activity against both bacteria and eukaryotic cells. Interestingly, a higher resistance to the activity of proteolytic enzymes was achieved. The reported results pave the way for the successful application of AMPs in medicine and biotechnological fields.