Mixed Field Research Articles

On 𝑝-adic Simpson and Riemann–Hilbert correspondences in the imperfect residue field case

Let K K be a mixed characteristic complete discrete valuation field with residue field admitting a finite p p -basis, and let G K G_K be the Galois group. Inspired by Liu and Zhu’s construction of p p -adic Simpson and Riemann–Hilbert correspondences over rigid analytic varieties, we construct such correspondences for representations of G K G_K . As an application, we prove a Hodge–Tate (resp. de Rham) “rigidity” theorem for p p -adic representations of G K G_K , generalizing a result of Morita.

Design of Moderator Assemblies for Fast, Epithermal, or Thermal Neutron–Dominated n-γ Mixed Fields Using a D-D Neutron Source

The treatment field of boron neutron capture therapy (BNCT) is a n-γ mixed field. In the Osaka University BNCT project, a material-filtered radio-photoluminescence glass dosimeter (RPLGD) was proposed for the simultaneous measurement of neutron and gamma-ray doses. In this study, to validate the material-filtered RPLGD, various types of n-γ mixed fields are designed by irradiating different moderator assemblies with a D-D neutron source at the OKTAVIAN facility, Osaka University, Japan. The n-γ mixed fields are classified into fast neutron–, epithermal neutron–, or thermal neutron–dominated fields and a gamma-ray-only field with the specific characteristics as follows: (1) the dose ratios of gamma ray to neutron are 1.0% to 977.0% for the fast neutron–dominated field, 5.0% to 921.1% for the epithermal neutron–dominated field, 5.0% to 921.1% for the thermal neutron–dominated field, and 11880.6% for the gamma-ray-only field; (2) the proportions of fast, epithermal, and thermal neutron doses to total neutron dose are 98.4% to 100.0% for the fast neutron–dominated field, 74.0% to 85.4% for the epithermal neutron–dominated field, and 90.1% to 90.8% for the thermal neutron–dominated field, respectively; and (3) the maximum gamma-ray energy is up to 12 MeV.

Open-loop narrowband magnetic particle imaging based on mixed-frequency harmonic magnetization response.

Magnetic particle imaging (MPI), a radiation-free, dynamic, and targeted imaging technique, has gained significant traction in both research and clinical settings worldwide. Signal-to-noise ratio (SNR) is a crucial factor influencing MPI image quality and detection sensitivity, and it is affected by ambient noise, system thermal noise, and the magnetization response of superparamagnetic nanoparticles. Therefore to address the high amplitude system and inherent thermal noise present in conventional MPI systems is essential to improve detection sensitivity and imaging resolution. This study introduces a novel open-loop, narrow-band MPI signal acquisition system based on mixed-frequency harmonic magnetization response. Allowing superparamagnetic nanoparticles to be excited by low frequency, high amplitude magnetic fields and high frequency, low amplitude magnetic fields, the excitation coil generates a mixed excitation magnetic field at a mixed frequency of 8.664 kHz (f H + 2f L ), and the tracer of superparamagnetic nanoparticles can generate a locatable superparamagnetic magnetization signal with rich harmonic components in the mixed excitation magnetic field and positioning magnetic field. The third harmonic signal is detected by a Gradiometer coil with high signal-to-noise ratio, and the voltage cloud image is formed. The experimental results show that the external noise caused by the excitation coil can be effectively reduced from 12 to about 1.5 μV in the imaging area of 30 mm × 30 mm, which improves the stability of the detection signal of the Gradiometer coil, realizes the detection of high SNR, and makes the detection sensitivity reach 10 μg Fe. By mixing excitation, the total intensity of the excitation field is reduced, resulting in a slight improvement of the resolution under the same gradient field, and the spatial resolution of the image reconstruction is increased from 2 mm under the single frequency excitation (20.7 kHz) in the previous experiment to 1.5 mm under the mixed excitation (8.664 kHz). These experimental results highlight the effectiveness of the proposed open-loop narrowband MPI technique in improving signal detection sensitivity, achieving high signal-to-noise ratio detection and improving the quality of reconstructed images by changing the excitation magnetic field frequency of the excitation coil, providing novel design ideas and technical pathways for future MPI systems.

Communication-centric integrated sensing and communications with mixed fields

Communication-centric integrated sensing and communications with mixed fields

Assessing the biological effects of boron neutron capture therapy through cellular DNA damage repair model.

Boron neutron capture therapy (BNCT) is a targeted radiotherapy that relies on the 10B (n, α) 7Li reaction, which produces secondary particles with high linear energy transfer (LET), leading to a high relative biological effectiveness (RBE) in tumors. The biological effectiveness of BNCT is influenced by factors such as boron distribution and concentration, necessitating improved methods for assessing its radiobiological effects and clarifying the sensitivity of the differences in different factors to the biological effects. This paper introduces a method to evaluate the biological effects of BNCT using the cellular repair model. This method aims to overcome some of the limitations of current evaluation approaches. The primary goal is to provide guidance for clinical treatments and the development of boron drugs, as well as to investigate the impact of the synergistic effects of mixed radiation fields in BNCT on treatment outcomes. The approach involves three key steps: first, extending the radial energy deposition distribution of BNCT secondary particles using Geant4-DNA. This allows for the calculation of initial DNA double-strand breaks (DSBs) distributions for a given absorbed dose. Next, the obtained initial DSB distributions are used for DNA damage repair simulations to generate cell survival curves, then thereby quantifying RBE and compound biological effectiveness (CBE). The study also explores the synergistic effects of the mixed radiation fields in BNCT on assessing biological effects were also explored in depth. The results showed that the RBE of boronophenylalanine (BPA) and sodium borocaptate (BSH) drugs at cell survival fraction 0.01 was 2.50 and 2.15, respectively. The CBE of the boron dose component was 3.60 and 0.73, respectively, and the RBE of the proton component was 3.21, demonstrating that BPA has a significantly higher biological impact than BSH due to superior cellular permeability. The proton dose significance in BNCT treatment is also underscored, necessitating consideration in both experimental and clinical contexts. The study demonstrates that synergistic effects between disparate radiation fields lead to increased misrepairs and enhanced biological impact. Additionally, the biological effect diminishes with rising boron concentration, emphasizing the need to account for intercellular DNA damage heterogeneity. This methodology offers valuable insights for the development of new boron compounds and precise assessment of bio-weighted doses in clinical settings and can be adapted to other therapeutic modalities.

Rotating and stationary sound sources separation method based on MCB

Traditional beamforming methods do not effectively separate the mixed field of sound sources for different rotational speeds. The coexistence of these sources often manifests out-of-focus sources (for instance, stationary sources appearing with a rotational focus), thereby blurring the beamforming outcomes. Most existing algorithms for segregating rotational different speed sources employ a virtual rotating array utilizing ring arrays. However, due to the constant microphone spacing, the acoustic imaging of the ring array suffers from the interference of high-level side lobes. In this work, a hybrid deconvolution method based on modal composition beamforming is used to explore the ability of a multi-arm spiral array to separate different speed sources. Considering the even energy distribution from the out-of-focus source along the circular trajectory, the beamforming result of out-of-focus sources exhibits a weaker amplitude than the source amplitude. Therefore, out-of-focus sources can be considered noise. First, the point spread function is derived based on the modal transfer function. Then, a system of linear equations is constructed based on an incomplete cross-point spread function matrix. Finally, the source separation is solved through sparse-constrained deconvolution. Simulation and experimental results demonstrate that this method can accurately locate and separate different rotational speed sound sources.

Kinetic model of multi-component polyatomic gas mixture considering internal energy excitation

In this paper, a kinetic Boltzmann model equation with internal degrees of freedom is established for thermodynamic non-equilibrium multi-component polyatomic gas mixture by using continuous energy levels to deal with rotational energy and vibrational energy. The normalization and conservativeness of the kinetic model are analyzed and proved. Then, numerical algorithm and wall boundary conditions for solving the model equation are given. Then, normal shock-wave structure flow problem and pressure/temperature gradient driven micro-channel flow problem for the two-component gas mixture are used to verify the reliability of the model. The simulation results are in good agreement with those obtained by other methods, which verifies the reliability of the model and algorithm in this paper. Finally, taking 25 N attitude control engine two-dimensional profile as the object, the study for two-dimensional profile nozzle internal and external mixed flow problem is carried out, and the influence of different inlet rarefaction levels on the molecular transports of mixed flow field and the molecular transport phenomena of mixed flow field with different number of components are discussed.

Development of [formula omitted]/[formula omitted]/[formula omitted] discrimination with the phoswich detector using improved charge comparison method

Both pulse shape discrimination methods based on temporal difference characteristic and phoswich detectors are well-known and effective for particles discrimination, so the combination and further improvement are significant for better performance. In this paper, a phoswich detector combining YAG(Ce) and CsI(Tl) was constructed for α/β/γ discrimination using various techniques including two machine learning algorithms and an improved charge comparison method that further exploited the difference in the decay rate of pulse tail. The detector was designed with Geant4, simulating the suitable sizes of scintillators, and a high-speed digitizer was used for the collection of pulses that were from three radioactive sources. The results among the α (β) and γ rays had the figure of merit values greater than 2, simultaneously with an optimal 1.68 of the improved method that had more than twice the performance comparing the original 0.69 for α/β identification, which showed the detector is able to discriminate α, β and γ rays in mixed radiation field effectively.

Nanodosimetric investigation of the track structure of therapeutic carbon ion radiation part 1: measurement of ionization cluster size distributions

At the Heidelberg Ion-Beam Therapy Center, the track structure of carbon ions of therapeutic energy after penetrating layers of simulated tissue was investigated for the first time. Measurements were conducted with carbon ion beams of different energies and polymethyl methacrylate (PMMA) absorbers of different thicknesses to realize different depths in the phantom along the pristine Bragg peak. Ionization cluster size (ICS) distributions resulting from the mixed radiation field behind the PMMA absorbers were measured using an ion-counting nanodosimeter. Two different measurements were carried out: (i) variation of the PMMA absorber thickness with constant carbon ion beam energy and (ii) combined variation of PMMA absorber thickness and carbon ion beam energy such that the kinetic energy of the carbon ions in the target volume is constant. The data analysis revealed unexpectedly high mean ICS values compared to stopping power calculations and the data measured at lower energies in earlier work. This suggests that in the measurements the carbon ion kinetic energies behind the PMMA absorber may have deviated considerably from the expected values obtained by the calculations. In addition, the results indicate the presence of a marked contribution of nuclear fragments to the measured ICS distributions, especially if the carbon ion does not cross the target volume.

Improved thermal resummation for multi-field potentials

The resummation of large thermal corrections to the effective potential is mandatory for the accurate prediction of phase transitions. We discuss the accuracy of different prescriptions to perform this resummation at the one- and two-loop level and point out conceptual issues that appear when using a high-temperature expansion at the two-loop level. Moreover, we show how a particular prescription called partial dressing, which does not rely on a high-temperature expansion, consistently avoids these issues. We introduce a novel technique to apply this resummation method to the case of multiple mixing fields. Our approach significantly extends the range of applicability of the partial dressing prescription, making it suitable for phenomenological studies of beyond the Standard Model extensions of the Higgs sector.

Determination of Turbulent Prandtl Number for Thermal Fluid Dynamics Simulation of HVAC Unit by Data Assimilation

Abstract Regarding high-precision temperature field prediction of a heating ventilation and air conditioning (HVAC) unit using thermal fluid dynamics simulation, the determination of the turbulent Prandtl number (Prt) was a key issue. In this study, we present an attempt to improve the accuracy of thermal fluid dynamics simulations in HVAC units by adjusting the Prt using data assimilation techniques. First, we simultaneously measured the velocity and temperature in the hot and cold air mixing zone of a simple HVAC model using particle image velocimetry and thermocouples. Second, we coupled data assimilation to the thermal fluid simulation model to determine the Prt in the mixing field. Finally, we proposed two functions of the Prt for high velocity and low velocity regions using multidimensional analysis. In the future, we believe that the Prt functions can be applied to thermal fluid simulations of actual HVAC unit to accurately predict performance without conducting prototype experiments, thereby contributing to reducing development cost and time of HVAC unit.

Change in occupational burnout measures in emergency medical service workers after a psychedelic experience induced by a single self-administered dose of psilocybin mushrooms

AbstractBackground and AimsThis naturalistic mixed methods field study, aimed to assess the potential of a psilocybin induced experience, to help Emergency Medical Service Workers (EMSW) to address psychological and stress related symptoms stemming from a challenging working environment, known to contribute to occupational burnout (OB).MethodsThis exploration was conducted with an intentional sample of five participants, recruited through an online survey who self-administered a therapeutic dose of psilocybin mushrooms to manage psychological symptoms resulting from their work as EMSW, allowing the authors to assess the outcome. To measure the impact of the experience, changes in OB measures were assessed with psychometric instruments previously used in this population at three timepoints, before and after the session. The subjective impact of the psychedelic experience, through psychological insights and emotional breakthroughs, was also assessed, and two follow-up interviews were conducted to collect further data.ResultsThe results showed that, two weeks after the session, a visible improvement was noticed in several measures of pre-existent OB, that remained stable after two months. Additionally, most participants reported a strong subjective impact, that they perceived as fundamental for the positive outcome.ConclusionsAfter one therapeutic psylocibin session, several measures of OB showed an encouraging level of improvement and may constitute an important step towards finding alternative and innovative solutions to address high rates of psychological distress experienced by EMSWs, also benefiting the organization and the quality of patient care. The limitations and implications of the study and suggestions for future research are discussed.

粮食干燥机自吸式热风变温装置设计与试验验证

During the grain drying process, in order to adjust the temperature, it is necessary to match the proportion of hot and cold air. This is the problem that the two components in the mixed gas cannot fully mix with each other in a short period of time, resulting in the problem that it takes a long time for the gas flow temperature to reach a stable value. Based on the process and technical requirements of the dryer, a self-priming hot air temperature changing device suitable for the dryer was designed. The two gas components used to improve the variable temperature ratio of the dryer are fully mixed with each other in a short time and a short distance, thereby reducing the loss caused by the food not reaching safe moisture. Based on Bernoulli's principle and the basic theory of airflow mixing in fluid dynamics, a mathematical model of airflow mixing in the constriction section of the main pipeline was established. Fluent was used to numerically simulate the distribution of uniform mixing distance and temperature field in the necking section. The results show that the mixing uniformity in the necking section reaches 75%-80%, which effectively improves the mixing efficiency. A self-priming hot air temperature change device test bench developed independently was used, and the quadratic orthogonal rotation combined test method was used for parameter optimization. Design-Expert.V8.0.6.1 was used for analysis and testing, and the regression equation and response surface were obtained to analyze the effects. Interaction between factors to determine the best combination of optimization parameters: when the number of air inlet pipes is 3.16, the incision axial angle is 27.6°, the temperature difference is 43.5°C, and the pipe diameter is 23.8mm, the post-mixing temperature is 50.93°C, and the mixing distance is uniform is 39.33mm. The test results are consistent with the optimization results. The self-priming hot air temperature changing device of the dryer has certain practical application value.

Compαrαtive chαrαcteristics of luminescent detector mαteriαls bαsed on α-Αl2O3-δ for neutron dosimetry

The optically stimulated luminescence (OSL) and the separation efficiency of the neutron and gamma components by OSL outputs were studied for samples of anion-deficient corundum (α-Αl2O3-δ) in ceramic and single-crystal forms with various neutron converters. For OSL dosimetry in mixed gamma-neutron fields, a detector material synthesized using ceramic technology consisting of a mixture of OSL active α-Αl2O3-δ and neutron-converter 6LiF powders in a ratio of 7:3 was selected as a promising one. The lower limit of the individual dose equivalent for such material under neutron irradiation does not exceed 30 μSv, and the dose dependence is linear up to 1 Sv.

Differential diffusion modelling for LES of premixed and partially premixed flames with presumed FDF

Large eddy simulations (LES) with flamelet and presumed filtered density function closure are used to simulate turbulent premixed and partially premixed hydrogen flames. Different approaches to model differential diffusion are investigated and compared. In particular, two existing models are extended to the LES framework to correct the resolved diffusive flux of the controlling variables due to differential diffusion. A lean premixed turbulent hydrogen flame in a slotted burner configuration is simulated first to compare the capability of the considered models in capturing local mixture fraction redistribution, super-adiabatic temperatures and thermo-diffusive instabilities. Results show that both models describe the formation of cellular burning structures. Next, a partially premixed lifted hydrogen flame in vitiated hot coflow is simulated to gain insight on the relevance of differential diffusion modelling at a higher turbulence level, a different combustion mode and in the presence of a complex stabilisation mechanism. Good predictions of the turbulent mixing and temperature fields are observed. Moreover, results show that the flame lift-off height has an appreciable sensitivity to the differential diffusion model. When differential diffusion is included only in the thermochemistry database, only mild effects on the predicted temperature fields, mixing and flame height are observed. On the contrary, a considerable shift of the flame base is observed when corrections are applied in the LES at the resolved level, depending on what controlling variables are considered. Further analyses reveal how the corrections of diffusive fluxes in the thermochemistry and at the LES level affect differently the flame burning mode, whose details are given throughout the paper.

Characterization of a novel polyurethane-based plastic scintillator for neutron and gamma detection in mixed radiation fields

We present studies of a novel plastic scintillator branded M600, which was developed and provided by Target Systemelektronik. This new material is, in contrast to other solid organic scintillators offered by commercial providers, based on a polyurethane matrix complemented with scintillating and wavelength-shifting additives. This paper covers measurements of absolute light output, LO, (photons per 1 MeV-γ), γ-non-proportionality (NP), light pulse shapes, and neutron-gamma (n/γ) discrimination. The measurements were carried out either using standard calibration gamma sources (LO, NP) or in a mixed field of neutron and γ radiation from an intense (∼4 × 105 neutrons/s/4π) AmBe source (n/γ discrimination). The measured light output was 9650 ± 1000 ph/MeV and the PSD's figure of merit (FoM) was found as 2.2 ± 0.1 at ∼1000 keVee for ∅2.54 cm × 2.54 cm M600 sample. The bigger sample (∅5.08 cm × 5.08 cm) exhibits about 25% lower LO and poorer FoM when compared to the ∅2.54 cm × 2.54 cm M600, due to self-absorption.

Measurement of the fluorescence decay rate of 2 PJ3 positronium

The fluorescence decay rate of 2 PJ3 positronium (Ps) atoms [Γfl] has been experimentally determined using a Stark-mixing technique. Ground-state Ps atoms were optically excited in an electric field to states containing both 2 PJ3 and 23S1 components. The relative state populations were controlled via an applied mixing electric field, and a larger, pulsed, electric field was used to induce rapid quenching of the system after a fixed time delay. The dependence of the quenching signal on the mixing field strength was used to determine the relative and populations of the mixed states, whose decay rates are determined by the intrinsic self-annihilation and fluorescence decay rates. The measurements were compared to a trajectory simulation and Stark-mixing model, using the fluorescence decay rate as a free parameter. By finding the best agreement between the data and simulations we obtain Γfl=299±25µs−1, which is consistent with the mean theoretical value of 313.343±0.003µs−1. Published by the American Physical Society 2024

Influence of methane-oxygen coupled gas field on the transformation mechanism of microporosity and active structure of cryogenic pre-oxidized residual coal

Due to the impact of coal seam mining processes and the release of adsorbed gases in residual coal, a mixed gas field of methane and oxygen is formed in the goaf, which affects the oxidation process of the residual coal over a long period. In this study, to explore the low-temperature oxidation mechanism of residual coal in a hypoxic methane-containing environment, Low temperature nitrogen adsorption (LTNA) experiments and Fourier transform infrared spectroscopy (FTIR) were utilized to examine the pore development properties of residual coal and the transformation mechanisms of reactive micro-groups. The results indicate that increases in temperature and methane proportion promote the transition of various pores to larger scales, with 3 % methane inducing the formation of fine micropores, thereby increasing the specific surface area of the coal. High temperatures (80℃，100℃) and increased proportions of oxygen and methane synergistically elevate the fractal dimensions. Methane inhibits the consumption of hydroxyl groups, and a low oxygen concentration (5 %) impedes the gas production from coal oxidation. The presence of both oxygen and methane exhibits a compound effect; the strongest tendency towards spontaneous combustion occur at 1 % methane and 9 % oxygen. The findings provide valuable insights for controlling spontaneous combustion disasters in goafs.

The effects of surface fossil magnetic fields on massive star evolution: V. Models at low metallicity

Abstract At metallicities lower than that of the Small Magellanic Cloud, it remains essentially unexplored how fossil magnetic fields, forming large-scale magnetospheres, could affect the evolution of massive stars, thereby impacting the fundamental building blocks of the early Universe. We extend our stellar evolution model grid with representative calculations of main-sequence, single-star models with initial masses of 20 and 60 M⊙, including appropriate changes for low-metallicity environments (Z = 10−3–10−6). We scrutinise the magnetic, rotational, and chemical properties of the models. When lowering the metallicity, the rotational velocities can become higher and the tendency towards quasi-chemically homogeneous evolution increases. While magnetic fields aim to prevent the development of this evolutionary channel, the weakening stellar winds lead to less efficient magnetic braking in our models. Since the stellar radius is almost constant during a blueward evolution caused by efficient chemical mixing, the surface magnetic field strength remains unchanged in some models. We find core masses at the terminal-age main sequence between 22 and 52 M⊙ for initially 60 M⊙ models. This large difference is due to the vastly different chemical and rotational evolution. We conclude that in order to explain chemical species and, in particular, high nitrogen abundances in the early Universe, the adopted stellar models need to be under scrutiny. The assumptions regarding wind physics, chemical mixing, and magnetic fields will strongly impact the model predictions.

Comparative analysis of machine learning-based dose assessment algorithms for TL dosimetry

This paper explores the implementation of machine learning-based algorithms for TL dose assessment. It focuses on the radiation field classification, performance quotient evaluation, and shallow and deep dose equivalent assessment of ANN and LGBM, in comparison to the traditional method of DT. We evaluate these algorithms based on the element response data measured by TLD. A data set was built for training, and the base element responses of test categories were amplified, and normalized to 1 mSv Cs-137 within the range of ±3 %. Both algorithms consist of five subset models for classifying radiation fields and identifying ratios of mixed fields. The LGBM showed the best accuracy in classifying considered radiation fields and the lowest performance quotients. By comparing the tolerance levels of deep dose and shallow dose equivalents among the three algorithms, the LGBM yields the smallest difference between the predicted and true dose equivalents. This smaller difference implies the LGBM offers the least bias and standard deviation in the expected value, giving higher accuracy and precision in dose assessment over the traditional DT method. The findings from this study further contribute to the adoption of ML-based algorithms for TL dose assessment, underscoring its importance in the field.