Minimizing System Energy Consumption Research Articles

A multi-strategy optimizer for energy minimization of multi-UAV-assisted mobile edge computing

Disasters in remote areas often cause damage to communication facilities, which presents significant challenges for rescue efforts. As flexible mobile devices, unmanned aerial vehicles (UAVs) can provide temporary network services to address this issue. This paper studies the use of UAVs as mobile base stations to offer offload computing services for disaster relief devices in affected areas. To ensure reliable communication between disaster relief devices and UAVs, we construct a multi-UAV-assisted mobile edge computing (MEC) system with the objective of minimizing system energy consumption. Inspired by swarm intelligence principles, we propose a multi-strategy optimizer (MSO) that defines various population search functions and employs superior neighborhood methods for population updates. Experimental results demonstrate that MSO achieves superior system energy efficiency and exhibits greater stability compared to several state-of-the-art swarm intelligence algorithms.

Energy efficient multi-user task offloading through active RIS with hybrid TDMA-NOMA transmission

In this paper, we address the challenge of minimizing system energy consumption for task offloading within non-line-of-sight (NLoS) mobile edge computing (MEC) environments. Our approach integrates an active reconfigurable intelligent surface (RIS) and employs a hybrid transmission scheme combining time division multiple access (TDMA) and non-orthogonal multiple access (NOMA) to enhance the quality of service (QoS) for user task offloading. The formulation of this problem as a non-convex optimization issue presents significant challenges due to its inherent complexity. To overcome this, we introduce an innovative method termed element refinement-based differential evolution (ERBDE). Initially, through rigorous theoretical analysis, we optimally determine the allocation of local computation resources, computation resources at the base station (BS), and transmit power of users, while maintaining fixed values for the offloading ratio, amplification factor, phase of the reflecting element, and the transmission period. Subsequently, we employ the differential evolution (DE) algorithm to iteratively fine-tune the offloading ratio, amplification factor, phase of the reflecting element, and transmission period towards near-optimal configurations. Our simulation results demonstrate that the implementation of active RIS-supported task offloading utilizing the hybrid TDMA-NOMA scheme results in an average system energy consumption reduction of 80.3%.

An online energy-saving offloading algorithm in mobile edge computing with Lyapunov optimization

Online computing offloading is an effective method to enhance the performance of mobile edge computing (MEC). However, existing research ignores the impact of system stability and device priority on system performance during task processing.To address the problem of computing offloading for computing-intensive tasks, an online partial offloading algorithm combining task queue length and energy consumption is proposed without any prior information. Firstly, a queue model of IoT devices is created to describe their workload backlogs and reflect the system stability. Then, using Lyapunov optimization, computing offloading problem is decoupled into two sub-problems by calculating the optimal CPU computing rate and device priority, which can determine the task offloading amount and offloading location to complete resource allocation. Finally, the online partial offloading algorithm based on devices priority is solved by minimizing the value of the drift-plus-penalty function’s upper bound to ensure system stability and reduce energy consumption. Theoretical analysis and the outcomes of numerous experiments demonstrate the effectiveness of the proposed algorithm in minimizing system energy consumption while adhering to system constraints, even in dealing with dynamically varying task arrival rates.

Energy-Aware Partitioned Scheduling of Imprecise Mixed-Criticality Systems

We consider partitioned scheduling of an Imprecise Mixed-Criticality (IMC) taskset on a uniform multiprocessor platform, with Earliest Deadline First-Virtual Deadline (EDF-VD) as the uniprocessor task scheduling algorithm, and address the optimization problem of finding a feasible task-to-processor assignment and low-criticality (LO) mode processor speed with the objective of minimizing the system’s average energy consumption in LO mode. We propose a task-to-processor assignment algorithm Criticality-Unaware Worst-Fit Decreasing (CU-WFD) algorithm, which allocates tasks with the Worst-Fit Decreasing (WFD) heuristic method based on utilization values at their respective criticality levels. We determine the energy-efficient speed for each processor based on EDF-VD scheduling, and present our algorithm Energy-Efficient Partitioned Scheduling for Imprecise Mixed-Criticality (EEPSIMC) with the CU-WFD heuristic algorithm to minimize system energy consumption. The experimental results show that our proposed algorithm has good performance in terms both schedulability ratio and normalized energy consumption compared to seven comparison baselines.

Resource allocation strategy for blockchain-enabled NOMA-based MEC networks

Blockchain technology is getting more and more attention due to its decentralization, independence and security features. However, in wireless networks it faces a computational challenge: the proof-of-work problem. Mobile edge computing (MEC) leads to a vaild scheme by providing cloud computing capabilities to mobile devices. Non-orthogonal multiple access (NOMA) exploits the diversity properties in the power domain to further increase system throughput and spectral efficiency. In this paper, we suggest a new NOMA-based MEC wireless blockchain network to minimize system energy consumption through task offloading decision optimization, user clustering, computing resource and transmit power allocation. In order to effectively figure out this non-convex problem, we first propose a offloading decision and user clustering algorithm, and then propose a computing resource allocation algorithm based on user Quality of Service (QoS) requirements. Finally, the transmission power can be easily determined. The numerical simulation results verify that the proposed joint optimization algorithm can effectively decrease the system energy consumption.

Performance Optimization for Energy-Efficient Industrial Internet of Things Based on Ambient Backscatter Communication: An A3C-FL Approach

The recent advent of the Industry 4.0 era has led to the need to transform the industrial Internet of Things towards green, low-carbon and sustainable development. This is due to the fact that traditional industries consume too much energy. It is urgent to make use of digital technology for energy saving and emission reduction. However, there are still some unresolved issues in the transformation process: 1) the inability to use equipment resources thoroughly and efficiently, 2) the waste caused by overly simple resource management. In this paper, based on the above issues, we develop the ambient backscatter system to optimize the overall resource scheduling scheme and combine intelligent algorithms to solve the problem of offloading tasks. The solution optimizes offloading decisions to minimize system energy consumption and latency. Meanwhile, the proposed optimization problem is designed as a Markov decision process by combining the proposed federated learning assigned with asynchronous advantage actor-critic algorithm to obtain the optimal policy. The final evaluation results significantly show that the system performance indicator based on our proposed solution is better than others.

Multi-Agent Learning-Based Optimal Task Offloading and UAV Trajectory Planning for AGIN-Power IoT

UAV-based air-ground integrated computing networks (AGIN) have gained significant traction in remote areas for the Power Internet of Things (PIoT). This paper considers an AGIN-PIoT, where computing tasks generated by ground PIoT devices are offloaded to aerial UAVs that perform edge computing. Jointly optimizing task offloading and UAV trajectory poses challenges such as many decision variables, information uncertainty, and long-term queue delay constraints. Due to the limited battery capacity of PIoT devices and UAVs, our objective is to minimize system energy consumption under long-term queue delay constraints by jointly optimizing task offloading, trajectory planning, and computing resource assignment. In light of Lyapunov optimization, we decompose the original challenging optimization problem into two sub-problems: (1) task offloading and UAV trajectory planning and (2) aerial edge resource allocation. Accordingly, we develop a multi-agent deep reinforcement learning-based algorithm called AGIN-MADDPG for the former to achieve the maximum accumulative reward and propose a greedy solution for the latter. Extensive experiments and numerical results demonstrate that our approach can avoid the problem of gradient vanishing and outperforms other benchmark methods in terms of power consumption, task backlog, queue delay, and system throughput.

5G communication resource allocation strategy for mobile edge computing based on deep deterministic policy gradient

AbstractDistributed base station deployment, limited server resources and dynamically changing end users in mobile edge networks make the design of computing offloading schemes extremely challenging. Considering the advantages of deep reinforcement learning (DRL) in dealing with dynamic complex problems, this paper designs an optimal computing offloading and resource allocation strategy. Firstly, the authors consider a multi‐user mobile edge network scenario consisting of Macro‐cell Base Station (MBS), Small‐cell Base Station (SBS) and multiple terminal devices, the communication overhead and calculation overhead generated are formulated and described in detail. Besides, combined with the deterministic delay of tasks, the optimization objective of this paper is clarified to comprehensively consider system energy consumption. Then, a learning algorithm based on Deep Deterministic Policy Gradient (DDPG) is proposed to minimize system energy consumption. Finally, simulation experiments show that the authors’ proposed DDPG algorithm can effectively optimize the target value, and the total system energy consumption is only 15.6 J, which is better than other compared algorithms. It is also proved that the proposed algorithm has excellent communication resource allocation ability.

Energy consumption modeling and analysis for short-reach optical transmissions using irregular LDPC codes.

As the transmission rate of data center (DC) related short-reach optical transmissions quickly increases to keep up with internet services' data demand pace, advanced FEC technology starts to establish its key role in short reach optical transmission systems. Coding strategy using Quasi-Cyclic LDPC (QC-LDPC) codes with hard-decision (HD) decoders stands out due to its excellent error correction ability and simple hardware implementation. Meanwhile, with the introduction of green communication concept and increasingly extensive applications of DC, energy consumption of short-reach links has become an urgent problem to be studied. Based on tanner-graph, energy consumption models of regular LDPC codes' HD decoding circuits over AWGN channel have been proposed. In this work, for the first time, we introduce energy consumption of optical transmitters and characteristics of short reach optical channels into energy consumption modeling. Besides, probability distributions of flipping operation as well as bit errors during irregular QC-LDPC codes' HD decoding iterations are analytically derived using density evolution algorithm. Based on our proposed model and post-layout circuit simulation, systems' total power when using four QC-LDPC codes in IEEE and 3GPP with Gallager A/B decoders together with the case of using no FEC are analyzed in two typical scenarios. Numerical results show that, in short range scenario with slight bandwidth limit, uncoded strategy is much more energy-saving than all adopted LDPC-coded strategies in 50Gbaud OOK and 25Gbaud PAM4 transmissions. While in severely band-limited case when FEC is necessary, a tradeoff between energy consumption of transmitters and decoders occurs in 70Gbaud OOK and 35Gbaud PAM4 transmissions. Besides, LDPC codes with longer length at similar rate are proved to consume less power for their better error correction ability. And in long range scenario, power differences among coding strategies grow significantly when pre-bit error rate (BER) approaches their error correction threshold, reflecting the great influence of error correction threshold on the energy consumption of LDPC decoders. Among all adopted coding strategies, a (19200, 15872) LDPC code with Gallager B decoder consumes minimum power in both two scenarios. However, it is also found that decoding algorithm minimizing the total power differs at different pre-BER if we concentrate on decoding algorithm, justifying the significance of our modeling in minimizing system energy consumption.

Dynamic Task Offloading for NOMA-Enabled Mobile Edge Computing with Heterogeneous Networks

With the rapid development of the Internet of Things (IoT), more and more computation-intensive tasks are generated by IoT devices. Due to their own limitations, IoT devices cannot process all tasks locally, and some tasks need to be offloaded to edge servers for processing. In addition, nonorthogonal multiple access (NOMA) technology allows multiple IoT devices to share the same frequency resource. IoT devices can use NOMA technology to transmit data to increase the data transmission rate. In this article, we study the problem of NOMA-enabled dynamic task offloading in heterogeneous networks. We formulate a stochastic optimization problem to minimize system energy consumption. Using stochastic optimization techniques, we transform this problem into a deterministic optimization problem and decompose it into five sub-problems to solve. At the same time, we propose a NOMA-enabled dynamic task offloading (NDTO) algorithm. Then, we mathematically analyze the performance of the NDTO algorithm. We conduct a series of parameter analysis experiments and comparative experiments, and the results verify the performance of the NDTO algorithm.

Energy- and Quality-Aware Task Offloading for WebVR Service in Terminal-Aided Mobile Edge Network

Web virtual reality (WebVR) is gaining increasing attention as interactive VR experiences become more prevalent. The high energy consumption and strict quality requirements are still significant challenges for its application in the mobile edge network. In this context, content caching and task offloading are promising solutions to save the energy of WebVR. This paper proposes a hybrid decentralized offloading architecture in which the MEC server and multiple terminals jointly participate in the caching and processing of WebVR tasks. In this framework, the graph convolutional network and unsupervised clustering algorithm are jointly applied to process the WebVR service feature graph to achieve FoV-level content caching. Moreover, WebVR users with idle computing resources assist neighboring users with performing tasks. On this basis, we propose a distributed low-bound-based alternative direction method of multiplier (LADMM) algorithm to optimize the offloading mode and the allocation of tasks and computing power resources to minimize system energy consumption. The proposed offloading mode can lower energy consumption while maintaining a good balance between delay performance and resource utilization.

OL-MEDC: An Online Approach for Cost-effective Data Caching in Mobile Edge Computing Systems

Mobile Edge Computing (MEC) has emerged to overcome the inability of cloud computing to offer low latency services. It allows popular data to be cached on edge servers deployed within users' geographic proximity. However, the storage resources on edge servers are constrained due to their limited physical sizes. Existing studies of edge caching have predominantly focused on maximizing caching performance from the mobile network operator's perspective, e.g., maximizing data retrieval success rate, minimizing system energy consumption, balancing the overall caching workload, etc. App vendors, as key stakeholders in MEC systems, need to maximize the caching revenue, considering the cost incurred and the benefit produced. We investigate this novel Mobile Edge Data Caching (MEDC) problem from the app vendor's perspective, and prove its NP-hardness. We then propose Online MEDC (OL-MEDC), an approach that formulates MEDC strategies for app vendors, without requiring future information about data demands. Its performance is theoretically analyzed and experimentally evaluated. The experimental results demonstrate that OL-MEDC outperforms state-of-the-art approaches by at least 20.41\% on average.

Edge Intelligence for Energy-Efficient Computation Offloading and Resource Allocation in 5G Beyond

5G beyond is an end-edge-cloud orchestrated network that can exploit heterogeneous capabilities of the end devices, edge servers, and the cloud and thus has the potential to enable computation-intensive and delay-sensitive applications via computation offloading. However, in multi user wireless networks, diverse application requirements and the possibility of various radio access modes for communication among devices make it challenging to design an optimal computation offloading scheme. In addition, having access to complete network information that includes variables such as wireless channel state, available bandwidth and computation resources, is a major issue. Deep Reinforcement Learning (DRL) is an emerging technique to address such an issue with limited and less accurate network information. In this paper, we utilize DRL to design an optimal computation offloading and resource allocation strategy for minimizing system energy consumption. We first present a multi-user end-edge-cloud orchestrated network where all devices and base stations have computation capabilities. Then, we formulate the joint computation offloading and resource allocation problem as a Markov Decision Process (MDP) and propose a new DRL algorithm to minimize system energy consumption. Numerical results based on a real-world dataset demonstrate that the proposed DRL-based algorithm significantly outperforms the benchmark policies in terms of system energy consumption. Extensive simulations show that learning rate, discount factor, and number of devices have considerable influence on the performance of the proposed algorithm.

Imitation Learning Enabled Task Scheduling for Online Vehicular Edge Computing

Vehicular edge computing (VEC) is a promising paradigm based on the Internet of vehicles to provide computing resources for end users and relieve heavy traffic burden for cellular networks. In this paper, we consider a VEC network with dynamic topologies, unstable connections and unpredictable movements. Vehicles inside can offload computation tasks to available neighboring VEC clusters formed by onboard resources, with the purpose of both minimizing system energy consumption and satisfying task latency constraints. For online task scheduling, existing researches either design heuristic algorithms or leverage machine learning, e.g., deep reinforcement learning (DRL). However, these algorithms are not efficient enough because of their low searching efficiency and slow convergence speeds for large-scale networks. Instead, we propose an imitation learning enabled online task scheduling algorithm with near-optimal performance from the initial stage. Specially, an expert can obtain the optimal scheduling policy by solving the formulated optimization problem with a few samples offline. For online learning, we train agent policies by following the expert’s demonstration with an acceptable performance gap in theory. Performance results show that our solution has a significant advantage with more than 50 percent improvement compared with the benchmark.

A Sleep Scheduling Target Tracking Research for Sensor Networks

Moving target tracking of sensor networks is an important application. The sensor nodes cooperate in the networks to discover the target, and the target’s perceptual information is feeded back to the user. In order to effectively reduce the network energy consumption and improve the tracking quality, a target tracking protocol is proposed based on two-stage sleep scheduling. The whole tracking process is divided into two stages in the protocol. According to the different requirements of node density, the different sleep scheduling mechanism is adopted. In this paper, the proposed protocol is further optimized to ensure the tracking quality while minimizing system energy consumption. Finally, the validity of the proposed protocol was verified with 36 sensor nodes.

Joint Deployment and Task Scheduling Optimization for Large-Scale Mobile Users in Multi-UAV-Enabled Mobile Edge Computing.

This article establishes a new multiunmanned aerial vehicle (multi-UAV)-enabled mobile edge computing (MEC) system, where a number of unmanned aerial vehicles (UAVs) are deployed as flying edge clouds for large-scale mobile users. In this system, we need to optimize the deployment of UAVs, by considering their number and locations. At the same time, to provide good services for all mobile users, it is necessary to optimize task scheduling. Specifically, for each mobile user, we need to determine whether its task is executed locally or on a UAV (i.e., offloading decision), and how many resources should be allocated (i.e., resource allocation). This article presents a two-layer optimization method for jointly optimizing the deployment of UAVs and task scheduling, with the aim of minimizing system energy consumption. By analyzing this system, we obtain the following property: the number of UAVs should be as small as possible under the condition that all tasks can be completed. Based on this property, in the upper layer, we propose a differential evolution algorithm with an elimination operator to optimize the deployment of UAVs, in which each individual represents a UAV's location and the entire population represents an entire deployment of UAVs. During the evolution, we first determine the maximum number of UAVs. Subsequently, the elimination operator gradually reduces the number of UAVs until at least one task cannot be executed under delay constraints. This process achieves an adaptive adjustment of the number of UAVs. In the lower layer, based on the given deployment of UAVs, we transform the task scheduling into a 0-1 integer programming problem. Due to the large-scale characteristic of this 0-1 integer programming problem, we propose an efficient greedy algorithm to obtain the near-optimal solution with much less time. The effectiveness of the proposed two-layer optimization method and the established multi-UAV-enabled MEC system is demonstrated on ten instances with up to 1000 mobile users.

Modeling, simulation, and optimization of a microalgae biomass drying process

The aim of the present work was to develop a transient mathematical model focused on microalgae biomass drying, considering two phases: solid (wet biomass) and gas (drying air). Mass and thermal energy balances were written for each phase producing a system of ordinary differential equations (ODE). The solution of the ODE set delivers the temperature and air humidity ratio and biomass profiles with respect to time. The numerical results were directly compared with temperature experimental measurements—for both phases—and with the biomass humidity content. Data from experiment 1 were used to carry out the mathematical model adjustment, whereas data from experiment 2 were used for the experimental validation of the model. The model was adjusted by proposing a new correlation for the mass transfer coefficient and by calibrating the heat transfer coefficient. The transient numerical results were in good quantitative and qualitative agreement with the experimental results, ie, within the experimental error bars. Then the experimentally validated mathematical model was utilized to optimize the following parameters: (i) the electric heater power ( ) and the dry air mass flow rate ( ) and (ii) the convection oven length to width ratio (L/W). The goal was to minimize system energy consumption (objective function). The optimization procedure was subject to the following physical constraints: (i) fixed convection oven total volume and (ii) fixed biomass and drying air contact surface area. For the oven original geometry, = 3.0 kW and = 9 g s−1 were numerically found for minimum energy consumption, so that 36.9% and 43.5% energy consumption decreases were obtained, respectively, in comparison with the measurements of experiment 1. Next, the numerical geometric optimization found (L/W)opt = 9, with and , which was capable to reach a 51.6% energy consumption reduction in comparison with the original system tested in experiment 1. The novelty of this work consists of the development and experimental validation of a physically based microalgae biomass drying mathematical model, ie, instead of using empirical correlations to predict the drying time and temperature profiles and then minimize system energy consumption. Therefore, the results show that it is reasonable to state that the model could be used to design, control, and optimize drying systems with configurations similar to the one analyzed in this study.

Field evaluation of performance of HVAC optimization system in commercial buildings

New smart building technologies that offer continuous dynamic optimization of Heating, Ventilation, and Air Conditioning (HVAC) control hold promise to advance building operations for efficiency and grid response. These technologies use data from the control system to determine the analytically optimal setpoints, and then write back the optimal setpoints into the control system to minimize system energy consumption or costs. There are limited studies documenting field validations of these technologies. This paper presents the results from a long-term field evaluation of a model-predictive HVAC optimization system that installed in four commercial buildings.Energy savings analysis was conducted based on pre/post submetered energy use. Across the cohort of evaluation sites, HVAC savings following the implementation of the optimization system were mixed, ranging from 0–9%. Analysis of site operational data showed that occupant comfort was neither positively nor negatively impacted. Key technology adoption considerations and recommendations are summarized in the paper. The technology performs best when HVAC systems are in good working condition, and can be exercised to achieve the full range of its optimized setpoints–however it may not provide extensive additional savings over cases where best practice sequences of operation and reset strategies are already comprehensively implemented.

A Quantitative and Systematic Methodology to Investigate Energy Consumption Issues in Multimodal Intercity Transportation Systems

Energy issues in transportation systems have garnered increasing attention recently. This study proposes a systematic methodology for policy-makers to minimize energy consumption in multimodal intercity transportation systems considering suppliers’ operational constraints and travelers’ mobility requirements. A bi-level optimization model is developed for this purpose and considers the air, rail, private auto, and transit modes. The upper-level model is a mixed integer nonlinear program aiming to minimize energy consumption subject to transportation suppliers’ operational constraints and traffic demand distribution to paths resulting from the lower-level model. The lower-level model is a linear program seeking to maximize the trip utilities of travelers. The interactions between the multimodal transportation suppliers and intercity traffic demand are considered under the goal of minimizing system energy consumption. The proposed bi-level mixed integer model is relaxed and transformed into a mathematical program with complementarity constraints, and solved using a customized branch-and-bound algorithm. Numerical experiments, conducted using multimodal travel options between Lafayette, Indiana and Washington, D.C. reiterate that shifting traffic demand from private cars to the transit and rail modes significantly reduce energy consumption. Moreover, the proposed methodology provides tools to quantitatively analyze system energy consumption and traffic demand distribution among transportation modes under specific policy instruments. The results illustrate the need to systematically incorporate the interactions among traveler preferences, network structure, and supplier operational schemes to provide policy-makers insights for developing traffic demand shift mechanisms to minimize system energy consumption. Hence, the proposed methodology provide policy-makers the capability to analyze energy consumption in the transportation sector by a holistic approach.

멀티홉 센서 네트워크에서 에너지 상황을 고려한 시스템 수명 최대화 알고리즘

This paper addresses the system lifetime maximization algorithm in multi-hop sensor network system. A multi-hop sensor network consists of many battery-driven sensor nodes that collaborate with each other to gather, process, and communicate information using wireless communications. As sensor-driven applications become increasingly integrated into our lives, we propose a energy-aware scheme where each sensor node transmits informative data with adaptive data rate to minimize system energy consumption. We show the optimal data rate to maximize the system lifetime in terms of remaining system energy. Furthermore, the proposed algorithm experimentally shows longer system lifetime in comparison with greedy algorithm.