Migration Energy Barriers Research Articles

In Situ Formed Continuous and Dense Inorganic Borate-Based SEI for High-Performance Li-Metal Batteries.

The practical application of lithium metal batteries (LMBs) is largely hindered by the notorious lithium dendrite growth, low cycle efficiency associated with insufficient electrode-electrolyte interphase dynamics, and electrolyte combustion. Here, an advanced electrolyte using a combination of three kinds of salts dissolved in carbonate-based solvents is developed. The salt anions dominate a primary solvation sheath, resulting in weak interaction between Li+ and the solvents, as well as the in situ formation of an inorganic-rich bilayer solid electrolyte interface (SEI). The designed electrolyte enables high cycle stability in LMBs with a high-loading NMC cathode (approximately 20mg cm-2), exhibiting 89.89% capacity retention after 200 cycles with the cutoff voltage of 4.5V. Cryo-TEM characterization and density-functional theory (DFT) calculations reveal that the borate-based bilayer SEI, characterized by an exceptional dense structure, effectively suppresses lithium dendrite growth, and certify the crucial role of inorganic component continuity and density within the SEI, which surpasses the absorption and migration energy barrier in terms of significance. This profound understanding of SEI structure holds great potential for advancing the development of high-stable LMBs and can be expanded to other battery system.

Enhancing thermal stability of Nb nanowires in a NiTiFe matrix via texture engineering

Metallic nanowires, renowned for their high strength and large elastic strain limits, have shown significant potential in rendering extraordinary structural and functional properties in composites. However, their integrity at high temperatures is often compromised due to fragmentation and spheroidization, processes driven by excess interfacial energy. Here, we demonstrate in a NiTiFe/Nb nanocomposite that the fragmentation and spheroidization of Nb nanowires can be significantly suppressed by tailoring the interfacial crystallographic orientation relationship between the nanowires and the matrix. By doping Fe into NiTi, we inhibit the typical deformation-induced amorphization of the NiTi-based matrix during severe deformation processing. The common (111)NiTi//(110)Nb texture is inherently suppressed and (110)NiTiFe//(110)Nb texture is formed instead. Such a change in texture allows Nb nanowires to retain their integrity up to 700 °C in the NiTiFe matrix, in contrast to the 550 °C in the counterparts. Simulation results indicate that the enhanced thermal stability of Nb nanowires is attributed to the reduced interfacial energy between (110)NiTiFe and (110)Nb. Additionally, Fe doping elevates the migration energy barrier for Nb diffusion, imposing further resistance to fragmentation and spheroidization.

Two-Dimensional ABS4 (A and B = Zr, Hf, and Ti) as Promising Anode for Li and Na-Ion Batteries.

Metal ion intercalation into van der Waals gaps of layered materials is vital for large-scale electrochemical energy storage. Transition-metal sulfides, ABS4 (where A and B represent Zr, Hf, and Ti as monolayers as anodes), are examined as lithium and sodium ion storage. Our study reveals that these monolayers offer exceptional performance for ion storage. The low diffusion barriers enable efficient lithium bonding and rapid separation while all ABS4 phases remain semiconducting before lithiation and transition to metallic states, ensuring excellent electrical conductivity. Notably, the monolayers demonstrate impressive ion capacities: 1639, 1202, and 1119 mAh/g for Li-ions, and 1093, 801, and 671 mAh/g for Na-ions in ZrTiS4, HfTiS4, and HfZrS4, respectively. Average voltages are 1.16 V, 0.9 V, and 0.94 V for Li-ions and 1.17 V, 1.02 V, and 0.94 V for Na-ions across these materials. Additionally, low migration energy barriers of 0.231 eV, 0.233 eV, and 0.238 eV for Li and 0.135 eV, 0.136 eV, and 0.147 eV for Na make ABS4 monolayers highly attractive for battery applications. These findings underscore the potential of monolayer ABS4 as a superior electrode material, combining high adsorption energy, low diffusion barriers, low voltage, high specific capacity, and outstanding electrical conductivity.

Cation reactivity inhibits perovskite degradation in efficient and stable solar modules.

Perovskite solar modules (PSMs) show outstanding power conversion efficiencies (PCEs), but long-term operational stability remains problematic. We show that incorporating N,N-dimethylmethyleneiminium chloride into the perovskite precursor solution formed dimethylammonium cation and that previously unobserved methyl tetrahydrotriazinium ([MTTZ]+) cation effectively improved perovskite film. The in situ formation of [MTTZ]+ cation increased the formation energy of iodine vacancies and enhanced the migration energy barrier of iodide and cesium ions, which suppressed nonradiative recombination, thermal decomposition, and phase segregation processes. The optimized PSMs achieved a record (certified) PCE of 23.2% with an aperture area of 27.2 cm2, with a stabilized PCE of 23.0%. The encapsulated PSM retained 87.0% of its initial PCE after ~1900 hours of maximum power point tracking at 85°C and 85% relative humidity under 1.0-sun illumination.

Structural stability and enhanced electrochemical performance of Co-free Li-rich layered Mn-based Li1.2Mn0.6Ni0.2O2 cathodes via F doping at the O site of lithium-ion batteries

Li-rich Mn-based Co-free layered oxides (LLOs) are promising cathode materials for lithium-ion batteries (LIBs). However, they exhibit capacity loss and low initial Coulombic efficiency. Herein, an F-doped Li1.2Mn0.6Ni0.2O1.9F0.10 material has been prepared by the high-temperature solid-state method, with numerous oxygen vacancies on the surface to accelerate Li + transport. The electrochemical performance of Li1.2Mn0.6Ni0.2O1.9F0.10 considerably improved after the treatment. A high-capacity retention of 86.9 % after 100 charge/discharge cycles at 1C was achieved for Li1.2Mn0.6Ni0.2O1.9F0.10. Results revealed that F doping replaces part of O2−, forming more force between the TM-F bonds (compared to the TM-O bond), which inhibits the cation mixing phenomenon. The layered structure stability of the material is improved after F doping, and the migration energy barrier of Li+ is reduced, which promotes the migration of Li+, thereby improving the electrochemical performance of Li1.2Mn0.6Ni0.2O2.

High-entropy strategy to suppress volumetric strain and enhance diffusion rate of Na3V2(PO4)2F3 cathode for durable and high-areal-capacity zinc-ion battery pouch cells

Aqueous zinc-ion batteries are pivotal contributors to the global energy transformation. Cathode materials with NASICON-type structures are promising candidates for zinc-ion batteries but are hindered by their low electrical conductivity, sluggish ionic diffusion, and structural instability. This work introduces a high-entropy, carbon-coated NASICON-type Na3V2(PO4)2F3 (HE-NVPF@C) cathode by incorporating five metal elements (Al, Zn, Mn, Cr, and Nb) mainly into the V sites of the VO4F2 octahedral structure. Systematic experimental and simulation studies of the Zn2+ storage mechanism in high-entropy NASICON-type cathode are presented for the first time. The high-entropy doping strategy contributes to significantly enhanced cycling stability by suppressing Jahn-Teller distortion, reducing lattice change during Zn2+ extraction and insertion, and decreasing the Zn2+ migration energy barrier. As a result, the HE-NVPF@C cathode demonstrates exceptional cycling stability over 6000 cycles at 20 C with a capacity loss of a mere 0.0031 % per cycle and a high areal capacity retention of 2.17 mAh cm−2. In addition, the pouch cell provides a long cycling lifespan with 90.8 % capacity retention at 5 C after 200 cycles. This feasible high-entropy approach broadens the perspective for developing practical zinc-ion batteries with a long cycle lifespan and high areal capacity.

Effect of impurities on hydrogen defect stability and migration barrier in yttrium dihydride crystal

The impurity or alloying atoms in YH2 can alter the local electronic structure and so the hydrogen defect stability, as well as the H migration barrier energy. Thus, DFT calculations were employed to determine the effect of foreign elements from alkali and alkaline earth metals to transition metals and one critical impurity element, O, on H vacancy stability and retention characteristics in YH2. Results revealed that alloying elements act as hydrogen vacancy sinks by reducing the vacancy formation energy at neighboring sites. The implantation of non-magnetic foreign elements (s1, s2, and d10 valence electrons) in hydrogen energy landscape was calculated to be minor; while the hydrogen vacancy formation energy was reduced from 1.37 eV to 1.00 eV, the migration energy barrier of hydrogen was increased from 0.87 eV to 1.15 eV for non-magnetic foreign elements. The migration energy barrier monotonically decreased with increasing d-shell occupancy, reaching as low as 0.4 eV for Cr, Mo(d4), and Fe (d4). Alloying with late transition metals (d8 and d9) moderately impacted the hydrogen vacancy formation. Finally, it was found to be O addition into the YH2- lattice did not alter the energy landscape of hydrogen vacancies. Since alloyed YH2 has not been studied extensively, this study provides an atomistic understanding how alloying elements and impurities trap vacancies and affects hydrogen mobility YH2. Meanwhile, the main findings of this study may serve as guidelines for introducing alloying elements in ZrH2 as well.

Electronic Confinement-Restrained Anti-Site Defects in Sodium-Rich Phosphates Toward Multi-Electron Transfer and High Energy Efficiency.

Sodium (Na) super-ionic conductor structured Na3MnTi(PO4)3 (NMTP) cathodes have garnered interest owing to their cost-effectiveness and high operating voltages. However, the voltage hysteresis phenomenon triggered by anti-site defects ( -ASD), namely, the occupation of Mn2+ in the Na2 vacancies in NMTP, leads to sluggish diffusion kinetics and low energy efficiency. This study employs an innovative electronic confinement-restrained strategy to achieve the regulation of -ASD. Partial replacement of titanium (Ti) with electron-rich vanadium (V) favors strong electronic interactions with Mn2+, restraining Mn2+ migration. The results suggest that this strategy can significantly increase the vacancy formation energy and migration energy barrier of manganese (Mn), thus inhibiting -ASD formation. As proof of this concept, an Na-rich Na3.5MnTi0.5V0.5(PO4)3 (NMTVP) material is designed, wherein the electronic interaction enhanced the redox activity and achieved more Na+ storage under high-voltage. The NMTVP cathode delivered a reversible specific capacity of up to 182.7 mAh g-1 and output an excellent specific energy of 513.8Wh kg-1, corresponding to ≈3.2 electron transfer processes, wherein the energy efficiency increased by 35.5% at 30C. Through the confinement effect of electron interactions, this strategy provides novel perspectives for the exploitation and breakthrough of high-energy-density cathode materials in Na-ion batteries.

Machine learning-augmented modeling on the formation of Si-dominated Non-β″ early-stage precipitates in Al-Si-Mg alloys with Si supersaturation induced by non-equilibrium solidification

Recent experiments have shown that Al-Si-Mg alloys solidified under high cooling rates may lead to the nucleation of Si-enriched clusters that are remarkably different from the conventional Mg-Si co-clusters (e.g. β″ particles), and yet the responsible mechanism remains to be elucidated. Here we tackle the problem using a multiscale modeling framework that integrates atomistic modeling, energy landscape sampling, and lattice-based kinetic Monte Carlo (kMC) simulation. The migration energy barriers for vacancy-mediated diffusion amid complex local chemical environments are predicted on-the-fly using a surrogate machine learning model. We discover that the actual vacancy-Si migration barriers are much lower than those assumed in the classic linear interpolation approximation. Such a strong deviation from conventional wisdom, in conjunction with differing Si solute composition, can lead to a great variety in the nucleated early-stage precipitates. More specifically, a high-level supersaturation of Si solute (i.e.xSi/(xSi+xMg)>0.75) would lead to an unexpectedly high enrichment of Si in the nucleated clusters with the Si:Mg ratio up to 5∼6; while at a lower-level supply of Si solute the Mg-Si co-clusters (i.e. Si:Mg ratio around 1∼2) are nucleated instead. These findings provide a viable explanation for the diverse types of early-stage precipitates observed in various experiments, from Si-enriched precipitates in high-pressure die cast Al alloys to β″ particles in conventional casting and/or heat-treated alloys. The implications of our findings are also discussed.

Hollow porous Co0.85Se/MoSe2@MXene heterostructured anode for sodium-ion hybrid capacitors

Metal selenides have garnered significant attention as promising anode materials for sodium-ion hybrid capacitors (SIHCs), yet its sluggish reaction kinetics as the battery-type anodes pose a challenge for developing high power SIHCs when coupled with capacitor-type cathodes. To overcome this limitation, constructing heterostructured metal selenides anodes has emerged as a promising strategy to balance the reaction kinetics between two different types of electrodes. Herein, the hollow porous TA-Co0.85Se/MoSe2@MXene anode with multiple heterostructures for sodium storage has been engineered via facile double-etching and self-assembly approach. The well-tailored void space and abundant heterointerfaces may effectively mitigate volumetric changes and enhance structural stability. Density functional theory (DFT) calculations further reveal that the local multilevel built-in electric fields induced by the heterointerfaces can effectively accelerate charge transfer and reduce the migration energy barrier of Na+, thus boosting the reaction kinetics. The fabricated anode demonstrates superior long-term cycling performance with a reversible capacity of 414 mA h/g after 1000 cycles at 1 A/g and remarkable rate capability of 425 mA h/g at 5 A/g. Benefiting from the ingenious structure and excellent sodium storage performance, the as-built SIHCs achieves an impressive energy density of 193 W h kg−1 and high power output of 18 kW kg−1 with outstanding capacitance retention of 90 % at 2 A/g after 10,000 cycles. This study provides valuable insights into the rational design of multiple heterostructured anode materials with multilevel built-in electric fields for high-performance SIHCs.

Manipulating the d-band center of bimetallic molybdenum vanadate for high performance aqueous zinc-ion battery

Vanadium-based oxides have good application prospects in aqueous zinc ion batteries (AZIBs) due to their structures suitable for zinc ion extraction and intercalation. However, their poor conductivity limits their further development. The d-band center plays a key role in promoting adsorption of ions, which promotes the development of electrode materials. Here, a series of MoV2O8 compounds with oxygen defect (Od-MoV2O8) were synthesized by a simple hydrothermal process and a subsequent vacuum calcination process through strict control of the deoxidation time. Theoretical calculations reveal that the abundant oxygen vacancies in MoV2O8 effectively regulate the d-band center of the zinc ion adsorption site. This precise control of the d-band center enhances the zinc ion adsorption energy of MoV2O8, lowers the migration energy barrier for zinc ions, and ultimately significantly boosts zinc storage performance. The specific capacity is as high as 282.4 mAh/g after 100 cycles at 0.1 A/g, and it also shows excellent performance and outstanding cycle life. In addition, the maximum energy density of Od-MVO-0.5 (MoV2O8 sample deoxidized for 0.5 h) is 343.3 Wh kg−1. Importantly, the mechanism of Zn2+ storage in Od-MoV2O8 was revealed by the combination of in situ and ex situ characterization techniques.

The role of crystallographic orientation on surface properties and ion transport in lithium germanate (Li2GeO3) anodes: A computational approach

The performance of lithium-ion batteries (LIBs) hinges on the surface properties of their anodes. Compared to the bulk material, the anode surface is more susceptible to environmental changes during lithium (Li) intake and release, directly impacting factors like capacity, cycling stability, and charge/discharge rates. Lithium germanate (Li2GeO3, LGO) has emerged as a promising anode material due to its fast Li-ion conduction. While numerous studies have explored performance improvements through various methods, including defect engineering. However, there is currently a lack of atomistic-level understanding of the surface structure. Consequently, despite the importance of precisely understanding the surface to manipulate its different properties, specific surface details of LGO remain unclear. This knowledge gap hinders precise manipulation of surface properties for optimal performance.This study addresses this critical need by employing theoretical calculations to predict the structural, electrochemical characteristics, and Li-ion transport behavior in LGO surfaces. Our results indicate that polar surfaces exhibit lower formation energies compared to non-polar surfaces. Further investigation revealed that Li-terminated surfaces possess the lowest surface energy among various surface terminations. Interestingly, the work function calculations displayed an opposite trend to surface formation energy, with polar surfaces exhibiting the lowest work function values.To explore Li-ion transport, we employed ab initio molecular dynamics simulations. Notably, the (003) surface displayed the highest Li-ion diffusion rate among all considered surfaces.Further analysis of the (001) surface, which exhibited similar diffusion pathways to the (003) surface, revealed a lower diffusion rate.To understand this disparity, nudged elastic band (NEB) simulations were used to estimate the energy barriers for Li-ion migration along each pathway in both structures. Despite sharing similar pathways, the energy barriers in the (003) surface were significantly lower than those in the (001) surface. This finding suggests that the intrinsic energy landscape of the surface plays a crucial role in dictating Li-ion transport behavior.

Suppressing Ion Migration in MAPbI3 Polycrystalline Wafer with BMIMBF4 Ionic Liquid for X‐ray Detection and Imaging

Abstract3D lead‐halide perovskite wafers, recognized for their superior photoelectronic properties and robust fabrication, are promising candidates for advanced X‐ray detectors. However, severe ion migration in 3D perovskite wafers leads to dark current baseline drift and long‐term operational instability, hindering their further development. Herein, 3D MAPbI3 polycrystalline wafers with suppressed ion migration are prepared using the ionic liquid 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMIMBF4) and systematically investigated for X‐ray detection. The BMIMBF4‐passivated MAPbI3 wafers exhibit a low defect trap density (ntrap) of 9.45 × 109 cm−3, a high ion activation energy (Ea) of 0.51 eV, a notable iodide ion migration energy barrier of 0.65 eV, and a decreased dark current drift (Idrift) of 3.56 × 10−4 nA cm−1 s−1 V−1. The optimized MAPbI3 wafer‐based detectors exhibit a high sensitivity of 12088.8 µC Gyair−1 cm−2, a low detection limit (LoD) of 107.8 nGyair s−1, and strong operational stability in X‐ray detection. Moreover, these detectors demonstrate outstanding X‐ray imaging capabilities, achieving a high spatial resolution of 5.17 lp mm−1. Consequently, the utilization of ionic liquids with pseudo‐halide anions and polarized electron density distribution provides an innovative strategy for passivating 3D perovskite, advancing the field of powder‐pressed perovskite wafer X‐ray detection.

Exploring interfacial stability for Zr-doped sulfide solid electrolyte with first-principle calculation

First-principles calculations are employed to investigate the interfacial properties on the Zr-doped sulfide solid electrolytes. Theoretical calculation results show that the PS4 tetrahedral structure near the Li/Li3PS4 interface is severely damaged, whereas the Zr-doped sulfide solid electrolyte interface structure has a slight deformation. The Li ions migration energy barrier on the Zr-doped sulfide solid electrolyte interface is relatively lower than that on the Li/Li3PS4. Moreover, the stress-strain analysis indicates that the Li/Li3PS4 interface structure experiences a maximum strain of only 6 %, while the Zr-doped sulfide solid electrolyte interface structure experiences a maximum strain of 10 %. This may be attributed to the ability of Zr doping to prevent S2− diffusion into the lithium metal anode and stabilize the Li ion transport skeleton. Therefore, Zr doping can improve the interface structure stability. This study will provide a useful perspective for designing high performance of solid electrolytes for the application of all-solid-state batteries.

Iridium Single-Atom-Ensembles Stabilized on Mn-Substituted Spinel Oxide for Durable Acidic Water Electrolysis.

Exploring single-atom-catalysts for the acidic oxygen evolution reaction (OER) is of paramount importance for cost-effective hydrogen production via acidic water electrolyzers. However, the limited durability of most single-atom-catalysts and Ir/Ru-based oxides under harsh acidic OER conditions, primarily attributed to excessive lattice oxygen participation resulting in metal-leaching and structural collapse, hinders their practical application. Herein, an innovative strategy is developed to fabricate short-range Ir single-atom-ensembles (IrSAE) stabilized on the surface of Mn-substituted spinel Co3O4 (IrSAE-CMO), which exhibits excellent mass activity and significantly improved durability (degradation-rate: ≈2mVh-1), outperforming benchmark IrO2 (≈44mVh-1) and conventional Irsingle-atoms on pristine-Co3O4 for acidic OER. First-principle calculations reveal that Mn-substitution in the octahedral sites of Co3O4 substantially reduces the migration energy barrier for Irsingle-atoms on the CMO surface compared to pristine-Co3O4, facilitating the migration of Irsingle-atoms to form strongly correlated IrSAE during pyrolysis. Extensive ex situ characterization, operando X-ray absorption and Raman spectroscopies, pH-dependence activity tests, and theoretical calculations indicate that the rigid IrSAE with appropriate Ir-Ir distance stabilized on the CMO surface effectively suppresses lattice oxygen participation while promoting direct O─O radical coupling, thereby mitigating Ir-dissolution and structural collapse, boosting the stability in an acidic environment.

Functionalized MBene, Ti[formula omitted]BX[formula omitted] (X=Si, Ge, P, As) as potential excellent anode materials for lithium and sodium-ion batteries: A first-principles study

In the search for next-generation energy storage devices, superior-performance alternative electrode materials based on two-dimensional materials for rechargeable metal-ion batteries are essential. Here, we explored group III and IV functionalization of 2D Ti2B, Ti2BX2 (X=Si, Ge, P, As) as anode materials for Li and Na ion batteries using first-principles calculations. The structures had excellent metallic properties and demonstrated energetically favorable adsorptions for metal ions. Analyzing charge transfer and electronic band structures, silicon and phosphorous-functionalized Ti2B (Ti2BSi2 and Ti2BP2) showed the most potential. The energy band diagrams showed that both Ti2BSi2 and Ti2BP2 had metallic characteristics after Li and Na-ion adsorption, which offered considerable advantage for rechargeable-ion batteries. The structures exhibited low energy barriers for Li and Na-ion migration. The minimum energy barriers calculated for Na were 0.08 eV for Ti2BSi2 and 0.24 eV for Ti2BP2. Theoretical specific capacity and open circuit voltage were calculated using maximum layer adsorption. For both Li and Na, high values of specific capacity and low values of open circuit voltage (¡ 1 V) were found. Ti2BSi2 had the best performance, with a theoretical specific capacity of 1647.10 and 1317.68 mA h/g for Li and Na, respectively. Its open circuit voltages for Li and Na were 0.65 and 0.38 V. The insights of this study will be beneficial in fabricating high-performing Ti2BX2-based anodes for rechargeable Li and Na ion batteries.

Uncovering the combining V with Ni micro-addition alloying on the mechanical properties and multiphase transformation during solidification and homogenization of Al–Zn–Mg–Cu–Sc alloy

The ultimate tensile strength of the T6-aged Al–Zn–Mg–Cu–Sc alloy is improved by 24 MPa reached 667 MPa with the addition of 0.10 % V, 0.20 %Ni and decrease 0.1 %Sc. The thermodynamic and microalloying mechanisms of phase transformation during solidification and homogenization of Al–Zn–Mg–Cu–Sc–V–Ni alloy were clarified. The phase transformation model of Al3Sc (V, Ni) structure induced by V and Ni addition during homogenization was established. The calculation radius showed that coherent L12-ordered Al3Sc(V, Ni) nanoparticles were formed in the Al–Zn–Mg–Cu–Sc–V–Ni alloy, which had a small critical nucleation radius (22.0 nm). The large thermodynamic driving force and the high kinetic energy migration energy barrier of γ-Al7Cu4Ni and Al3Sc (V, Ni) phases led to the finer microstructure of grain. V element not only promoted the formation of Al21V2 phase containing Sc but also hindered the mutual diffusion of Al and (Sc, Ni) elements in the eutectic system via segregation at the α-Al/Al3Sc (V, Ni) interface, which improved the stability of the whole alloy. The edge nucleation of γ-Al7Cu4Ni phase upon its diffusion into a Sc-containing Al21V2 phase induced the formation of Al3Sc (V, Ni) structure, whereas the segregation of V and Ni further strengthened the alloy matrix.

Modulating the lattice structure via Cr3+ doping in LiFe0.4Mn0.6PO4 cathode for improved rate behavior and promoted cyclic performance

Although LiFe0.4Mn0.6PO4 cathode shows high potential in battery industry, the cyclic performance and rate behavior are still the concerns to overcome. In this paper, Cr3+ doping in the cathode is confirmed very effective to improve both the performance via increased Li migration kinetics and suppressed lattice expansion during the redox process. It is found from the XRD refinement that Li − O bond length is increased upon Cr3+ intercalation, which in turn leads to the decrease in migration energy barrier (from 48.41 KJ·mol−1 to 19.57 KJ·mol−1) and the increase in Li diffusion coefficient. GITT investigation reveals a big promotion of DLi from 7.38 × 10−11 cm2·s−1 to 4.47 × 10−10 cm2·s−1, which is regarded as the reason for the excellent rate capacity of 126.62 mAh·g−1 (80.8 % of the value at 0.1C) at 5C current density. Further study with ex-situ XRD investigation reveals that the lattice expansion during redox process is suppressed after Cr3+ doping due to the smaller radius and stronger bond energy of the substituted cations. The suppressed volume change decreases both the internal resistance and the polarization of the electrode, which therefore leads to an improved capacity retention. The initial discharge specific capacity of LFMP-2%Cr cathode material reaches 156.8 mAh·g−1 at 0.1C, and the capacity retention rate of the material is maintained as 98.4 % after 100 cycles at 0.5C. The above results reveal the effectiveness of Cr3+ in promoting the electrochemical performance and further confirm the Cr- doped LFMP cathode high potential in future application.

Synergistic Enhancement of Biaxial Stretching and Multilayer Composites in All-Solid-State Polymer Electrolytes.

As an important component of lithium-ion batteries, all-solid-state electrolytes should possess high ionic conductivity, excellent flexibility, and relatively high mechanical strength. All-solid-state polymer electrolytes (ASSPEs) based on polymers seem to be able to meet these requirements. However, pure ASSPEs have relatively low ionic conductivity, and the addition of inorganic fillers such as lithium salts will reduce their flexibility and mechanical strength. To address the above issues, in this paper, the solvent-free method was used to prepare a poly(vinylidenefluoride-co-hexafluoropropylene)/lithium bis(trifluoromethanesulfonyl) imide/poly(ethylene oxide) all-solid-state polymer electrolyte, which was then subjected to 4 × 4 magnification synchronous bidirectional stretching. Subsequently, it was multilayered with PEO-based composite polymer electrolytes to obtain multilayered composite polymer electrolytes (MCPEs). Bidirectional stretching provides superior in-plane and out-of-plane mechanical properties to MCPEs by inducing molecular chain orientation, which suppresses the growth of lithium dendrites. Concurrently, it facilitates the formation of the β-crystal form of PVDF-HFP, thereby weakening the ion solvation effect and reducing the lithium-ion migration energy barrier. Multilayered compounding improves the interfacial contact between MCPEs and electrodes, thereby reducing the interfacial impedance. Experiments have demonstrated that the MCPEs prepared in this paper exhibit high ionic conductivity at room temperature (1.83 × 10-4 S cm-1), low interfacial resistance (547 Ω cm-2), excellent mechanical properties (26 MPa), and excellent cycling rate performance (a capacity retention rate of 90% after 110 cycles at 0.1 C), which can meet the performance requirements of lithium-ion batteries for ASSPEs.

Influence of applied tensile/compressive stress on He-irradiated SiC: Examining defect evolution through experimental investigation and DFT simulations

This study investigates the effects of applied tensile and compressive stresses on the evolution of defects in He-irradiated silicon carbide (SiC) materials. By combining experimental studies with density-functional theory (DFT) simulations, we systematically analyzed the microstructural changes and defect formation mechanisms in SiC under stress. The research focused on He irradiation of SiC at 750 °C, with a fluence of 1 × 101⁷ He/cm2. The results revealed that the strain resulting from radiation damage depends on the applied stress during irradiation. Moreover, the formation of platelets is influenced by this applied stress: tensile stress promotes platelet growth, while compressive stress inhibits it. DFT simulations further supported these experimental findings by showing that under tensile strain, both carbon vacancies (Cv) and He atoms exhibit low energy barriers for migration. This phenomenon facilitates platelet growth, aligning well with the observations made in the experiments. However, when considering applications like semiconductor thin film transfer, such as the Smart-cut technique, He implantation under tensile stress can actually be advantageous. This approach enables the use of lower He fluence, which in turn reduces the overall cost of the operation. By strategically leveraging the effects of tensile stress on He implantation, it becomes possible to optimize processes like Smart-cut for more efficient and cost-effective thin film transfer in semiconductor manufacturing.