Mid-infrared Quantum Cascade Laser Frequency Research Articles

Controlled generation of harmonic states in mid-infrared quantum cascade laser frequency combs by external cavity optical feedback.

We demonstrate the implementation of external cavity optical feedback to improve coherence and promote generation of harmonic states by a mid-infrared quantum cascade laser frequency comb. In particular, we present a Vernier-like scheme to realize harmonic comb states that increase the repetition rate of the comb by a factor of up to 6 and broaden spectral coverages from 46 cm-1 to 92 cm-1. Intermode beatnote and dual comb characterization indicate that the coherence of the comb has greatly improved for sub-optimal devices when the comb is operated in these harmonic states. This approach to control the generation of harmonic states and improve comb performance can be readily incorporated to various sensing systems and has great potential in spectroscopic measurements that require high repetition rates and/or broad optical bandwidth.

Quantum cascade laser frequency comb locked with 200 mrad residual phase noise

Using near-infrared light, we tightly-lock a mid-infrared quantum cascade laser frequency comb to another laser, achieving a residual integrated phase noise of 200 mrad. This high coherence is pertinent for highly-sensitive dual-comb spectroscopy and metrology.

Analog FM free-space optical communication based on a mid-infrared quantum cascade laser frequency comb.

Quantum cascade laser frequency combs are nowadays well-appreciated sources for infrared spectroscopy. Here their applicability for free-space optical communication is demonstrated. The spontaneously-generated intermodal beat note of the frequency comb is used as carrier for transferring the analog signal via frequency modulation. Exploiting the atmospheric transparency window at 4 µm, an optical communication with a signal-to-noise ratio up to 65 dB is realized, with a modulation bandwidth of 300 kHz. The system tolerates a maximum optical attenuation exceeding 35 dB. The possibility of parallel transmission of an independent digital signal via amplitude modulation at 5 Mbit/s is also demonstrated.

Mid-infrared quantum cascade laser frequency combs with a microstrip-like line waveguide geometry

In this work, a design for a mid-infrared quantum cascade laser frequency comb source that enhances the high frequency response and the comb characteristics of the device is presented. A state-of-the-art active region, grown on a heavily n-doped InP:Si substrate, was processed into a buried heterostructure with a microstrip-like line waveguide. As a result, the repetition rate frequency frep, around 11.09 GHz, can be locked to an injected narrow-linewidth radio frequency (RF) signal, over a range of more than 200 kHz with an injected power of −10 dBm, which outperforms normal buried heterostructure schemes by an order of magnitude. Moreover, under RF injection at powers higher than 20 dBm, the lasing spectrum is flattened and significantly broadened, from 24 cm−1 to 65 cm−1 in bandwidth, while at the same time, the coherence of the comb is maintained and verified.

Mid-infrared quantum cascade laser frequency combs based on multi-section waveguides.

We present quantum cascade laser (QCL) frequency comb devices with engineered waveguides for managing the dispersion. The QCL waveguide consists of multiple sections with different waveguide widths. The narrow and wide sections of the waveguide are designed in a way to compensate the group velocity dispersion (GVD) of each other and thereby produce a flat and slightly negative GVD for the QCL. The QCL exhibits continuous comb operation over a large part of the dynamic range of the laser. Strong and narrow-linewidth intermode beatnotes are achieved in a more than 300 mA wide operation current range. The comb device also features considerably high output power (>380mW) and wide optical bandwidth (>55cm-1).

Frequency noise correlation between the offset frequency and the mode spacing in a mid-infrared quantum cascade laser frequency comb.

The generation of frequency combs in the mid-infrared (MIR) spectral range by quantum cascade lasers (QCLs) has the potential for revolutionizing dual-comb multi-heterodyne spectroscopy in the molecular fingerprint region. However, in contrast to frequency combs based on passively mode-locked ultrafast lasers, their operation relies on a completely different mechanism resulting from a four-wave mixing process occurring in the semiconductor gain medium that locks the modes together. As a result, these lasers do not emit pulses and no direct self-referencing of a QCL comb spectrum has been achieved so far. Here, we present a detailed frequency noise characterization of a MIR QCL frequency comb operating at a wavelength of 8 µm with a mode spacing of ∼7.4 GHz. Using a beat measurement with a narrow-linewidth single-mode QCL in combination with a dedicated electrical scheme, we measured the frequency noise properties of an optical mode of the QCL comb, and indirectly of its offset frequency for the first time, without detecting it by the standard approach of nonlinear interferometry applied to ultrafast mode-locked lasers. In addition, we also separately measured the noise of the comb mode spacing extracted electrically from the QCL. We observed a strong anti-correlation between the frequency fluctuations of the offset frequency and mode spacing, leading to optical modes with a linewidth slightly below 1 MHz in the free-running QCL comb (at 1-s integration time), which is narrower than the individual contributions of the offset frequency and mode spacing that are at least 2 MHz each.

Pulses from a mid-infrared quantum cascade laser frequency comb using an external compressor

A Martinez-type stretcher-compressor is used to modify the spectral phases of a high-power (~1 W) QCL comb emitted at 8.2 {\mu}m with more than 100 cm-1 spectral bandwidth. Using this scheme, we demonstrate a compression of the QCL output from a 134 ps continuous wave waveform, to a train of pulses of width 12 ps, and a power with peak to average ratio of 40.7. An evaluation of the phase noise of the free-running device yields an integrated timing jitter of 335 fs over the frequency range 20 kHz - 100 MHz, and a pulse-to-pulse jitter of 2.0 fs.

Plasmon-enhanced waveguide for dispersion compensation in mid-infrared quantum cascade laser frequency combs.

We demonstrate dispersion compensation in mid-infrared quantum cascade laser frequency combs (FCs) emitting at 7.8μm using the coupling of a dielectric waveguide to a plasmonic resonance in the top cladding layer of the latter. Devices with group velocity dispersion lower than 110 fs2/mm were fabricated, and narrow beatnotes with FWHM linewidths below 1kHz were measured on the entire operation range. At -20°C, the optical output power reaches 275mW, and the optical spectrum spans 60 cm-1. The multi-heterodyne beating spectrum of two devices was measured and spans 46 cm-1, demonstrating the potential of dispersion-engineered waveguides for the fabrication of highly stable and reliable quantum cascade laser FCs with high output power across the mid-infrared.

Dispersion compensated mid-infrared quantum cascade laser frequency comb with high power output

Chromatic dispersion control plays an underlying role in optoelectronics and spectroscopy owing to its enhancement to nonlinear interactions by reducing the phase mismatching. This is particularly important to optical frequency combs based on quantum cascade lasers which require negligible dispersions for efficient mode locking of the dispersed modes into equally spaced comb modes. Here, we demonstrated a dispersion compensated mid-IR quantum cascade laser frequency comb with high power output at room temperature. A low-loss dispersive mirror has been engineered to compensate the device’s dispersion residue for frequency comb generation. Narrow intermode beating linewidths of 40 Hz in the comb-working currents were identified with a high power output of 460 mW and a broad spectral coverage of 80 cm-1. This dispersion compensation technique will enable fast spectroscopy and high-resolution metrology based on QCL combs with controlled dispersion and suppressed noise.

On-chip dual-comb based on quantum cascade laser frequency combs

Dual-comb spectroscopy is emerging as an appealing application of mid-infrared frequency combs for high-resolution molecular spectroscopy, as it leverages on the unique coherence properties of frequency combs. Here, we present an on-chip dual-comb source based on mid-infrared quantum cascade laser frequency combs. Control of the combs repetition and offset frequencies is obtained by integrating micro-heaters next to each laser. We show that a full control of the dual-comb system is possible, by measuring a multi-heterodyne beating corresponding to an optical bandwidth of 32 cm−1 centered at 1330 cm−1 (7.52 μm), demonstrating that this device represents a critical step towards compact dual-comb systems.