Mid-infrared Interferometric Observations Research Articles

The dusty circumstellar environment of Betelgeuse during the Great Dimming as seen by VLTI/MATISSE

Context. The ‘Great Dimming’ of the prototypical red supergiant Betelgeuse, which occurred between December 2019 and April 2020, gives us unprecedented insight into the processes occurring on the stellar surface and in the inner wind of this type of star. In particular it may bring further understanding of their dust nucleation and mass-loss processes. Aims. Here, we present and analyse VLTI/MATISSE observations in the N band (8–13 µm) taken near the brightness minimum in order to assess the status of the dusty circumstellar environment. Methods. We explored the compatibility of a dust clump obscuring the star with our mid-infrared interferometric observations using continuum 3D radiative transfer modelling, and probed the effect of adding multiple clumps close to the star on the observables. We also tested the viability of a large cool spot on the stellar surface without dust present in the ambient medium. Results. Using the visibility data, we derived a uniform disk diameter of 59.02 ± 0.64 mas in the spectral range 8–8.75 µm. We find that both the dust clump and the cool spot models are compatible with the data. Further to this, we note that the extinction and emission of our localised dust clump in the line of sight of the star directly compensate for each other, making the clump undetectable in the spectral energy distribution and visibilities. The lack of infrared brightening during the Great Dimming therefore does not exclude extinction due to a dust clump as one of the possible mechanisms. The visibilities can be reproduced by a spherical wind with dust condensing at 13 stellar radii and a dust mass-loss rate of (2.1–4.9) × 10−10 M⊙ yr−1; however, in order to reproduce the complexity of the observed closure phases, additional surface features or dust clumps would be needed.

Hot exozodiacal dust: an exocometary origin?

Context. Near- and mid-infrared interferometric observations have revealed populations of hot and warm dust grains populating the inner regions of extrasolar planetary systems. These are known as exozodiacal dust clouds, or exozodis, reflecting the similarity with the solar system’s zodiacal cloud. Radiative transfer models have constrained the dust to be dominated by tiny submicron-sized, carbon-rich grains that are accumulated very close to the sublimation radius. The origin of this dust is an unsolved issue. Aims. We explore two exozodiacal dust production mechanisms, first re-investigating the Poynting-Robertson drag pile-up scenario, and then elaborating on the less explored but promising exocometary dust delivery scenario. Methods. We developed a new, versatile numerical model that calculates the dust dynamics, with non-orbit-averaged equations for the grains close to the star. The model includes dust sublimation and incorporates a radiative transfer code for direct comparison to the observations. We consider in this study four stellar types, three dust compositions, and we assume a parent belt at 50 au. Results. In the case of the Poynting-Robertson drag pile-up scenario, we find that it is impossible to produce long-lived submicron-sized grains close to the star. The inward drifting grains fill in the region between the parent belt and the sublimation distance, producing an unrealistically strong mid-infrared excess compared to the near-infrared excess. The dust pile-up at the sublimation radius is by far insufficient to boost the near-IR flux of the exozodi to the point where it dominates over the mid-infrared excess. In the case of the exocometary dust delivery scenario, we find that a narrow ring can form close to the sublimation zone, populated with large grains from several tens to several hundreds of micrometers in radius. Although not perfect, this scenario provides a better match to the observations, especially if the grains are carbon-rich. We also find that the number of active exocomets required to sustain the observed dust level is reasonable. Conclusions. We conclude that the hot exozodiacal dust detected by near-infrared interferometry is unlikely to result from inward grain migration by Poynting-Robertson drag from a distant parent belt, but could instead have an exocometary origin.

VLTI/MIDI atlas of disks around low- and intermediate-mass young stellar objects

Context. Protoplanetary disks show large diversity regarding their morphology and dust composition. With mid-infrared interferometry the thermal emission of disks can be spatially resolved, and the distribution and properties of the dust within can be studied. Aims. Our aim is to perform a statistical analysis on a large sample of 82 disks around low- and intermediate-mass young stars, based on mid-infrared interferometric observations. We intend to study the distribution of disk sizes, variability, and the silicate dust mineralogy. Methods. Archival mid-infrared interferometric data from the MIDI instrument on the Very Large Telescope Interferometer are homogeneously reduced and calibrated. Geometric disk models are used to fit the observations to get spatial information about the disks. An automatic spectral decomposition pipeline is applied to analyze the shape of the silicate feature. Results. We present the resulting data products in the form of an atlas, containing N band correlated and total spectra, visibilities, and differential phases. The majority of our data can be well fitted with a continuous disk model, except for a few objects, where a gapped model gives a better match. From the mid-infrared size–luminosity relation we find that disks around T Tauri stars are generally colder and more extended with respect to the stellar luminosity than disks around Herbig Ae stars. We find that in the innermost part of the disks (r ≲ 1 au) the silicate feature is generally weaker than in the outer parts, suggesting that in the inner parts the dust is substantially more processed. We analyze stellar multiplicity and find that in two systems (AB Aur and HD 72106) data suggest a new companion or asymmetric inner disk structure. We make predictions for the observability of our objects with the upcoming Multi-AperTure mid-Infrared SpectroScopic Experiment (MATISSE) instrument, supporting the practical preparations of future MATISSE observations of T Tauri stars.

Thick turbulent gas disks with magnetocentrifugal winds in active galactic nuclei

Infrared high-resolution imaging and interferometry show that the dust distribution is frequently elongated along the polar direction of an AGN. In addition, interferometric mm line observations have revealed a bipolar outflow in a direction nearly perpendicular to the nuclear disk. To explain these findings, we developed a model scenario for the inner ~30 pc of an AGN. The structure of the gas within this region is entirely determined by the gas inflow from larger scales. We assumed a rotating thick gas disk between about one and ten parsec. External gas accretion adds mass and injects energy via gas compression into this gas disk and drives turbulence. We extended the description of a massive turbulent thick gas disk developed in a recent paper by adding a magnetocentrifugal wind. Our disks are assumed to be strongly magnetized via equipartition between the turbulent gas pressure and the energy density of the magnetic field. In a second step, we built 3D density cubes based on the analytical model, illuminated them with a central source, and made radiative transfer calculations. In a third step, we calculated mid-infrared (MIR) visibility amplitudes and compared them to available interferometric observations. We show that magnetocentrifugal winds starting from a thin and thick gas disk are viable in active galaxy centers. The magnetic field associated with this thick gas disk plays a major role in driving a magnetocentrifugal wind at a distance of ~1 pc from the central black hole. Once the wind is launched, it is responsible for the transport of angular momentum and the gas disk can become thin. A magnetocentrifugal wind is also expected above the thin magnetized gas disk. The structure and outflow rate of this wind is determined by the properties of the thick gas disk. The outflow scenario can account for the elongated dust structures, outer edges of the thin maser disks, and molecular outflows observed in local AGN. The models reproduce the observed terminal wind velocities, the scatter of the MIR – intrinsic X-ray correlation, and point source fractions. An application of the model to the Circinus galaxy and NGC 1068 shows that the infrared spectral energy distribution, available MIR interferometric observations, and optical polarization can be reproduced in a satisfactory way, provided that (i) a puff-up at the inner edge of the thin disk is present and (ii) a local screen with an optical depth of τV ~ 20 in form of a local gas filament and/or a warp of the thick disk hide a significant fraction of both nuclei. Our thick disk, wind, thin disk model is thus a promising scenario for local Seyfert galaxies.

CONFRONTING STANDARD MODELS OF PROTO-PLANETARY DISKS WITH NEW MID-INFRARED SIZES FROM THE KECK INTERFEROMETER

ABSTRACT We present near- and mid-infrared (MIR) interferometric observations made with the Keck Interferometer Nuller and near-contemporaneous spectro-photometry from the infrared telescope facilities (IRTFs) of 11 well-known young stellar objects, several of which were observed for the first time in these spectral and spatial resolution regimes. With au-level spatial resolution, we first establish characteristic sizes of the infrared emission using a simple geometrical model consisting of a hot inner rim and MIR disk emission. We find a high degree of correlation between the stellar luminosity and the MIR disk sizes after using near-infrared data to remove the contribution from the inner rim. We then use a semi-analytical physical model to also find that the very widely used “star + inner dust rim + flared disk” class of models strongly fails to reproduce the spectral energy distribution (SED) and spatially resolved MIR data simultaneously; specifically a more compact source of MIR emission is required than results from the standard flared disk model. We explore the viability of a modification to the model whereby a second dust rim containing smaller dust grains is added, and find that the 2-rim model leads to significantly improved fits in most cases. This complexity is largely missed when carrying out SED modeling alone, although detailed silicate feature fitting by McClure et al. recently came to a similar conclusion. As has been suggested recently by Menu et al., the difficulty in predicting MIR sizes from the SED alone might hint at “transition disk”-like gaps in the inner au; however, the relatively high correlation found in our MIR disk size versus stellar luminosity relation favors layered disk morphologies and points to missing disk model ingredients instead.

Resolving the inner disk of UX Orionis

Aims. The cause of the UX Ori variability in some Herbig Ae/Be stars is still a matter of debate. Detailed studies of the circumstellar environment of UX Ori objects (UXORs) are required to test the hypothesis that the observed drop in photometry might be related to obscuration events. Methods. Using near- and mid-infrared interferometric AMBER and MIDI observations, we resolved the inner circumstellar disk region around UX Ori. Results. We fitted the K -, H -, and N -band visibilities and the spectral energy distribution (SED) of UX Ori with geometric and parametric disk models. The best-fit K -band geometric model consists of an inclined ring and a halo component. We obtained a ring-fit radius of 0.45 ± 0.07 AU (at a distance of 460 pc), an inclination of 55.6 ± 2.4°, a position angle of the system axis of 127.5 ± 24.5°, and a flux contribution of the over-resolved halo component to the total near-infrared excess of 16.8 ± 4.1%. The best-fit N -band model consists of an elongated Gaussian with a HWHM ~ 5 AU of the semi-major axis and an axis ration of a / b ~ 3.4 (corresponding to an inclination of ~72°). With a parametric disk model, we fitted all near- and mid-infrared visibilities and the SED simultaneously. The model disk starts at an inner radius of 0.46 ± 0.06 AU with an inner rim temperature of 1498 ± 70 K. The disk is seen under an nearly edge-on inclination of 70 ± 5°. This supports any theories that require high-inclination angles to explain obscuration events in the line of sight to the observer, for example, in UX Ori objects where orbiting dust clouds in the disk or disk atmosphere can obscure the central star.

THE SUBARCSECOND MID-INFRARED VIEW OF LOCAL ACTIVE GALACTIC NUCLEI. III. POLAR DUST EMISSION*

ABSTRACT Recent mid-infrared (MIR) interferometric observations have shown that in a few active galactic nuclei (AGNs) the bulk of the infrared emission originates from the polar region above the putative torus, where only a little dust should be present. Here, we investigate whether such strong polar dust emission is common in AGNs. Out of 149 Seyferts in the MIR atlas of local AGNs, 21 show extended MIR emission on single-dish images. In 18 objects, the extended MIR emission aligns with the position angle (PA) of the system axis, established by [O iii], radio, polarization, and maser-based PA measurements. The relative amount of resolved MIR emission is at least 40% and scales with the [O iv] fluxes, implying a strong connection between the extended continuum and [O iv] emitters. These results together with the radio-quiet nature of the Seyferts support the scenario that the bulk of MIR emission is emitted by dust in the polar region and not by the torus, which would demand a new paradigm for the infrared emission structure in AGNs. The current low detection rate of polar dust in the AGNs of the MIR atlas is explained by the lack of sufficient high-quality MIR data and the requirements on the orientation, strength of narrow-line region, and distance of the AGNs. The James Webb Space Telescope will enable much deeper nuclear MIR studies with comparable angular resolution, allowing us to resolve the polar emission and surroundings in most of the nearby AGNs.

A multi-wavelength interferometric study of the massive young stellar object IRAS 13481-6124

We present new mid-infrared interferometric observations of the massive young stellar object IRAS 13481-6124, using VLTI/MIDI for spectrally-resolved, long-baseline measurements (projected baselines up to $\sim120$ m) and GSO/T-ReCS for aperture-masking interferometry in five narrow-band filters (projected baselines of $\sim1.8-6.4$ m) in the wavelength range of $7.5-13$ $\mu$m. We combine these measurements with previously-published interferometric observations in the $K$ and $N$ bands in order to assemble the largest collection of infrared interferometric observations for a massive YSO to date. Using a combination of geometric and radiative-transfer models, we confirm the detection at mid-infrared wavelengths of the disk previously inferred from near-infrared observations. We show that the outflow cavity is also detected at both near- and mid-infrared wavelengths, and in fact dominates the mid-infrared emission in terms of total flux. For the disk, we derive the inner radius ($\sim1.8$ mas or $\sim6.5$ AU at 3.6 kpc), temperature at the inner rim ($\sim1760$ K), inclination ($\sim48$ deg) and position angle ($\sim107$ deg). We determine that the mass of the disk cannot be constrained without high-resolution observations in the (sub-)millimeter regime or observations of the disk kinematics, and could be anywhere from $\sim10^{-3}$ to $20$ M$_\odot$. Finally, we discuss the prospects of interpreting the spectral energy distributions of deeply-embedded massive YSOs, and warn against attempting to infer disk properties from the SED.

Atlas of low-mass young stellar object disks from mid-infrared interferometry

AbstractWe present our approach of visibility modeling of disks around low-mass (< 2 M⊙) young stellar objects (YSOs). We compiled an atlas based on mid-infrared interferometric observations from the MIDI instrument at the VLTI. We use three different models to fit the data. These models allow us to determine overall sizes (and the extent of the inner gaps) of the modeled circumstellar disks.

Resolving HD 100546 disc in the mid-infrared: Small inner disc and asymmetry near the gap

A region of roughly half of the solar system scale around the star HD 100546 is largely cleared of gas and dust, in contrast to the bright outer disc. However, some material is observed in the immediate vicinity of the star. We investigate how the dust is distributed within and outside the gap, and constrain the disc geometry with mid-infrared interferometric observations using VLTI/MIDI. With baseline lengths of 40m, our long baseline observations are sensitive to the inner few AU from the star, and we combined them with observations at shorter, 15m baselines, to probe emission beyond the gap at up to 20AU from the star. We modelled the mid-infrared emission using radial temperature profiles. Our model is composed of infinitesimal concentric annuli emitting as black bodies, and it has distinct inner and outer disc components. We derived an upper limit of 0.7AU for the radial size of the inner disc, from our longest baseline data. This small dusty disc is separated from the edge of the outer disc by a large, roughly 10AU wide gap. Our short baseline data place a bright ring of emission at 11+-1AU, consistent with prior observations of the transition region between the gap and the outer disc, known as the disc wall. The inclination and position angle are constrained by our data to i=53+-8deg and PA=145+-5deg. Compared to the rim and outer disc geometry this suggests co-planarity. Brightness asymmetry is evident in both short and long baseline data, and it is unequivocally discernible from any atmospheric or instrumental effects. The origin of the asymmetry is consistent with the bright disc wall, which we find to be 1-2AU wide. The gap is cleared of micron-sized dust, but we cannot rule out the presence of larger particles and/or perturbing bodies.

The VLTI/MIDI survey of massive young stellar objects

We aim to characterize the distribution and composition of circumstellar material around young massive stars, and to investigate exactly which physical structures in these objects are probed by long-baseline mid-infrared interferometric observations. We used the two-telescope interferometric instrument MIDI of the Very Large Telescope Interferometer of the European Southern Observatory to observe a sample of 24 intermediate- and high-mass young stellar objects in the N band (8-13 micron). We had successful fringe detections for 20 objects, and present spectrally-resolved correlated fluxes and visibility levels for projected baselines of up to 128 m. We fit the visibilities with geometric models to derive the sizes of the emitting regions, as well as the orientation and elongation of the circumstellar material. Fourteen objects in the sample show the 10 micron silicate feature in absorption in the total and correlated flux spectra. For 13 of these objects, we were able to fit the correlated flux spectra with a simple absorption model, allowing us to constrain the composition and absorptive properties of the circumstellar material. Nearly all of the massive young stellar objects observed show significant deviations from spherical symmetry at mid-infrared wavelengths. In general, the mid-infrared emission can trace both disks and outflows, and in many cases it may be difficult to disentangle these components on the basis of interferometric data alone, because of the sparse spatial frequency coverage normally provided by current long-baseline interferometers. For the majority of the objects in this sample, the absorption occurs on spatial scales larger than those probed by MIDI. Finally, the physical extent of the mid-infrared emission around these sources is correlated with the total luminosity, albeit with significant scatter.

Mid-infrared interferometric observations of four oxygen-rich Mira variables

We present an investigation of the dust formation process in the atmospheres of the oxygen-rich AGB stars RR Aql, S Ori, GX Mon and R Cnc using spatially and spectrally resolved mid-infrared interferometric observations. We successfully compared multi epoch observations to a radiative transfer model of the dust shells, where the central stellar intensity profile is described by a series of dust-free dynamic model atmospheres based on self-excited pulsation models. We show that the Al 2 O 3 shells have inner radii between 1.9 and 2.2 stellar photospheric radii, and that the silicate shells have inner radii between 4.1 and 4.6 stellar photospheric radii. The best-fit photospheric angular diameters are consistent with independent estimates. The model dust temperatures at the inner radii of 1.9–2.2 stellar radii and 4.1–4.6 stellar radii are consistent with dust condensation temperatures of Al 2 O 3 and silicates, respectively.

On the massive young stellar object AFGL 4176

Deeply embedded and at distances of several kiloparsecs, massive young stellar objects (MYSOs) present numerous challenges for observation and study. In this work, we present spatially-resolved observations of one MYSO, AFGL 4176, together with survey and literature data, ranging from interferometric observations with VLTI/MIDI in the mid-infrared, to single-dish Herschel measurements in the far-infrared, and sub-millimeter data from APEX. We consider this spatially-resolved, multi-wavelength data set in terms of both radiative transfer and geometric models. We find that the observations are well described by one-dimensional models overall, but there are also substantial deviations from spherical symmetry at scales of tens to hundreds of astronomical units, which are revealed by the mid-infrared interferometric measurements. We use a multiple-component, geometric modeling approach to explain the mid-infrared emission on scales of tens to hundreds of astronomical units, and find the MIDI measurements are well described by a model consisting of a one-dimensional Gaussian halo and an inclined (\theta=60 deg) circumstellar disk extending out to several hundred astronomical units along a position angle of 160 deg. Finally, we compare our results both with previous models of this source, and with those of other MYSOs, and discuss the present situation with mid-infrared interferometric observations of massive stars.

Detection of an asymmetry in the envelope of the carbon Mira R Fornacis using VLTI/MIDI

Aims. We present a study of the envelope morphology of the carbon Mira R For with VLTI/MIDI. This object is one of the few asymptotic giant branch (AGB) stars that underwent a dust-obscuration event. The cause of such events is still a matter of discussion. Several symmetric and asymmetric scenarios have been suggested in the literature. Methods. Mid-infrared interferometric observations were obtained separated by two years. The observations probe different depths of the atmosphere and cover different pulsation phases. The visibilities and the differential phases were interpreted using GEM-FIND, a tool for fitting spectrally dispersed interferometric observations with the help of wavelength-dependent geometric models. Results. We report the detection of an asymmetric structure revealed through the MIDI differential phase. This asymmetry is observed at the same baseline and position angle two years later. The observations are best simulated with a model that includes a uniform-disc plus a Gaussian envelope plus a point-source. The geometric model can reproduce both the visibilities and the differential phase signatures. Conclusions. Our MIDI data favour explanations of the R For obscuration event that are based on an asymmetric geometry. We clearly detect a photocentre shift between the star and the strongly resolved dust component. This might be caused by a dust clump or a substellar companion. However, the available observations do not allow us to distinguish between the two options. The finding has strong implications for future studies of the geometry of the envelope of AGB stars: if this is a binary, are all AGB stars that show an obscuration event binaries as well? Or are we looking at asymmetric mass-loss processes (i.e. dusty clumps) in the inner part of a carbon-rich Mira?

The circumbinary dusty disk around the hydrogen-deficient binary star $\mathsf{\upsilon}$ Sagittarii

Aims. The aim of this paper is to determine the properties of the dusty environment of the hydrogen-deficient binary system υ Sgr, whose binary properties and other characteristics are poorly known. Methods. We obtained the first mid-IR interferometric observations of υ Sgr using the instrument MIDI of the VLTI used with different pairs of 1.8 m and 8 m telescopes. The calibrated visibilities, the N band spectrum, and the SED were compared with disk models computed with the MC3D code to determine the geometry and chemical composition of the envelope. Results. υ Sgr is unresolved with an 8 m telescope at 8.7 μ m. We propose a disk model that agrees with the measured visibilities and the SED, consisting of a geometrically thin disk with an inner radius $R_{\rm in} = 6.0^{+0.5}_{-1.5}$ AU and a scale height $h_{100} = 3.5^{+2.0}_{-1.5}$ AU. The chemical composition of the dust is approximately 60% of carbon dust and 40% of silicate dust, as a consequence of several episodes of mass transfers, whose chemistry was imprinted in the dust composition. We also constrain the inclination of the disk $i = {50^\circ}^{+10^\circ}_{-20^\circ}$ and its orientation position angle PA = ${80^\circ}^{+10^\circ}_{-5^\circ}$. Conclusions. The mid-infrared interferometric observations of the binary star υ Sgr allowed us to constrain the geometry of the circumbinary dusty envelope. By defining the inclination and PA of the system with better accuracy than before, these observations restrict the parameter space for the orbital parameters and thus the nature of the stars orbiting in this system.

Three-dimensional radiative transfer models of clumpy tori in Seyfert galaxies

Context. Tori of Active Galactic Nuclei (AGN) are made up of a mixture of hot and cold gas, as well as dust. In order to protect the dust grains from destruction by the surrounding hot gas as well as by the energetic (UV/optical) radiation from the accretion disk, the dust is often assumed to be distributed in clouds. Aims. A new three-dimensional model of AGN dust tori is extensively investigated. The torus is modelled as a wedge-shaped disk within which dusty clouds are randomly distributed throughout the volume, by taking the dust density distribution of the corresponding continuous model into account. We especially concentrate on the differences between clumpy and continuous models in terms of the temperature distributions, the surface brightness distributions and interferometric visibilities, as well as spectral energy distributions. Methods. Radiative transfer calculations with the help of the three-dimensional Monte Carlo radiative transfer code MC3D are used in order to simulate spectral energy distributions as well as surface brightness distributions at various wavelengths. In a second step, interferometric visibilities for various inclination as well as position angles and baselines are calculated, which can be used to directly compare our models to interferometric observations with the MIDI instrument. Results. We find that the radial temperature distributions of clumpy models possess significantly enhanced scatter compared to the continuous cases. Even at large distances, clouds can be heated directly by the central accretion disk. The existence of the silicate 10 µm-feature in absorption or in emission depends sensitively on the distribution, the size and optical depth of clouds in the innermost part of the dust distribution. With this explanation, failure and success of previous modelling efforts of clumpy tori can be understood. The main reason for this outcome are shadowing effects of clouds within the central region. We underline this result with the help of several parameter variations. After adapting the parameters of our clumpy standard model to the circumstances of the Seyfert 2 Circinus galaxy, it can qualitatively explain recent mid-infrared interferometric observations performed with MIDI, as well as high resolution spectral data.

A snapshot of the inner dusty regions of a R CrB-type variable

Context. R Coronae Borealis (R CrB) variable stars are suspected to sporadically eject optically thick dust clouds causing, when one of them lies on the line-of-sight, a huge brightness decline in visible light. Direct detections with 8-m class adaptive optics of such clouds located at about 0.2–0.3 arcsec from the center (∼1000 stellar radii) were recently reported for RY Sgr, the brightest R CrB of the southern hemisphere. Aims. Mid-infrared interferometric observations of RY Sgr allowed us to explore the circumstellar regions much closer to the central star (∼20–40 mas) to look for the signature of any heterogeneities and to characterize them. Methods. Using the VLTI/MIDI instrument, five dispersed visibility curves in the N-band were recorded in May and June 2005 with different projected baselines oriented towards two roughly perpendicular directions. The large spatial frequencies’ visibility curves exhibit a sinusoidal shape, whereas, at shorter spatial frequencies’ visibility curves follow a Gaussian decrease. These observations are well interpreted with a geometrical model consisting of a central star surrounded by an extended circumstellar envelope in which one bright cloud is embedded. Results. Within this simple geometrical scheme, the inner 110 AU dusty environment of RY Sgr is dominated at the time of observations by a single dusty cloud, which at 10 µm represents ∼10% of the total flux of the whole system, slightly less that the star flux. The cloud is located at about 100 stellar radii (or ∼30 AU) from the center toward the East-North-East direction (or the symmetric direction with respect to center) within a circumstellar envelope whose FWHM is about 120 stellar radii. This first detection of a cloud so close to the central star supports the classical scenario of the R CrB brightness variations in the optical spectral domain and demonstrates the feasibility of a temporal monitoring of the dusty environment of this star on a monthly scale.

Comparison of dynamical model atmospheres of Mira variables with mid-infrared interferometric and spectroscopic observations

We present a comparison of dynamical model atmospheres with mid-infrared (~11 micron) interferometric and spectroscopic observations of the Mira variable o Cet. The dynamical model atmospheres of Mira variables pulsating in the fundamental mode can fairly explain, without assuming ad-hoc components, the seemingly contradictory mid-infrared spectroscopic and interferometric observations of o Cet: the 11 micron sizes measured in the bandpass without any salient spectral features are about twice as large as those measured in the near-infrared. Our calculations of synthetic spectra show that the strong absorption due to a number of optically thick H2O lines is filled in by the emission of these H2O lines originating in the geometrically extended layers, providing a possible physical explanation for the picture proposed by Ohnaka (2004a) based on a semi-empirical modeling. This filling-in effect results in rather featureless, continuum-like spectra in rough agreement with the observed high-resolution 11 micron spectra, although the models still predict the H2O lines to be more pronounced than the observations. The inverse P-Cyg profiles of some strong H2O lines observed in the 11 micron spectra can also be reasonably reproduced by our dynamical model atmospheres. The presence of the extended H2O layers manifests itself as mid-infrared angular diameters much larger than the continuum diameter. The 11 micron uniform-disk diameters predicted by our dynamical model atmospheres are in fair agreement with those observed with the Infrared Spatial Interferometer (ISI), but still somewhat smaller than the observed diameters. We discuss possible reasons for this discrepancy and problems with the current dynamical model atmospheres of Mira variables.

The Dusty AGB Star RS CrB: First Mid-Infrared Interferometric Observations with the Keck Telescopes

We report interferometric observations of the semiregular variable star RS CrB, a red giant with strong silicate emission features. The data were among the first long-baseline mid-infrared stellar fringes obtained between the Keck telescopes, using parts of the new nulling beam combiner.

Mid-infrared interferometry of the Mira variable RR Sco with the VLTI MIDI instrument

We present the results of the first mid-infrared interferometric observations of the Mira variable RR Sco with the MID-infrared Interferometer (MIDI) coupled to the European Southern Observatory's (ESO) Very Large Telescope Interferometer (VLTI), together with K-band observations using VLTI VINCI. The observations were carried out in June 2003, when the variability phase of the object was 0.6, using two unit telescopes (UT1 and UT3), as part of the Science Demonstration Time (SDT) program of the instrument. Projected baseline lengths ranged from 73 to 102 m, and a spectral resolution of 30 was employed in the observations, which enabled us to obtain the wavelength dependence of the visibility in the region between 8 and 13 μm. The uniform-disk diameter was found to be 18 mas between 8 and 10 μm, while it gradually increases at wavelengths longer than 10 pm to reach 24 mas at 13 μm. The uniform-disk diameter between 8 and 13 pm is significantly larger than the K-band uniform-disk diameter of 10.2 ± 0.5 mas measured using VLTI VINCI with projected baseline lengths of 15-16 m. three weeks after the MIDI observations. Our model calculations show that optically thick emission from a warm molecular envelope consisting of H 2 O and SiO can cause the apparent mid-infrared diameter to be much larger than the continuum diameter. We find that the warm molecular envelope model extending to ∼2.3 R* with a temperature of ∼1400 K and column densities of H 2 O and SiO of 3 x 10 21 cm -2 and 1 x 10 20 cm -2 , respectively, can reproduce the observed uniform-disk diameters between 8 and 10 μm. The observed increase of the uniform-disk diameter longward of 10 μm can be explained by an optically thin dust shell consisting of silicate and corundum grains. The inner radius of the optically thin dust shell is derived to be 7-8 R * with a temperature of ∼700 K, and the optical depth at 10 μm is found to be ∼0.025.