Microwave Photonic Signal Processing Research Articles

Versatile quantum microwave photonic signal processing platform based on coincidence window selection technique

Versatile quantum microwave photonic signal processing platform based on coincidence window selection technique

Flexible and reconfigurable integrated optical filter based on tunable optical coupler cascaded with coupled resonator optical waveguide.

Reconfigurable optical filter can satisfy diverse filtering requirements in different application scenarios and shorten development cycle. However, it is still challenging to achieve multi-functional filtering richness with high performance. Here, based on a tunable optical coupler cascaded with a coupled resonator optical waveguide (CROW), a highly flexible and reconfigurable integrated optical filter is proposed and demonstrated on the low-loss silicon nitride platform. Both single injection and double injection configurations can be deployed to obtain rich spectral responses. For the single injection configuration, flat-top bandpass filter was experimentally achieved, whose shape factor could be as low as 1.648 and extinction ratio (ER) can be 37.5 dB with a bandwidth tuning range from 2.12 to 4.01 GHz. For the double injection configuration, Lorentz, triangular, sinusoidal, square, tangent-like, and interleaver spectral responses have been reconfigured by controlling seven phase shifters. Moreover, both single and double free spectral ranges (FSR) can be obtained for a fixed ring perimeter in the double injection configuration. The measured ER for the notch filter of Lorentz responses with double FSR is 36.8 dB. We believe that the proposed device has great potential for reconfigurable photonic filtering and microwave photonic signal processing.

Tailorable ITO thin films for tunable microwave photonic applications

Tunability is a fundamental prerequisite for functional devices and forms the backbone of reconfigurable microwave photonic (MWP) signal processors. In this paper, we explore the use of indium tin oxide (ITO) thin films, notable for their combination of optical transparency and electrical conductivity, to provide tunability for integrated MWP devices. We study the impacts of post-thermal annealing on the structural, electrical, and optical properties of ITO films. The annealed ITO microheater maintains a low total insertion loss of just 0.1 dB while facilitating the tunability of the microring across the entire free spectral range (FSR) using less than half the voltage required by its non-annealed counterpart. Furthermore, the post-annealed ITO film exhibits a 30% improvement in response time, enhancing its performance as an active voltage-controlled microheater. Leveraging this advantage, we employed the post-annealed device to demonstrate continuous tunable radio frequency (RF) phase shifts from 0–330° across a frequency range spanning 15 GHz to 40 GHz with only 5.58 mW of power. The flexibility in modifying the ITO thin film properties effectively bridges the gap between achieving low-loss and high-speed thermo-optic based microheaters.

Slow-light-enhanced Brillouin scattering with integrated Bragg grating.

Advancements in photonic integration technology have enabled the effective excitation of simulated Brillouin scattering (SBS) on a single chip, boosting Brillouin-based applications such as microwave photonic signal processing, narrow-linewidth lasers, and optical sensing. However, on-chip circuits still require large pump power and centimeter-scale waveguide length to achieve a considerable Brillouin gain, making them both power-inefficient and challenging for integration. Here, we exploit the slow-light effect to significantly enhance SBS, presenting the first, to the best of our knowledge, demonstration of a slow-light Brillouin-active waveguide on the silicon-on-insulator (SOI) platform. By integrating a Bragg grating with a suspended ridge waveguide, a 2.1-fold enhancement of the forward Brillouin gain coefficient is observed in a 1.25 mm device. Furthermore, this device shows a Brillouin gain coefficient of 1,693 m-1W-1 and a mechanical quality factor of 1,080. The short waveguide length reduces susceptibility to inhomogeneous broadening, enabling the simultaneous achievement of a high Brillouin gain coefficient and a high mechanical quality factor. This approach introduces an additional dimension to enhance acousto-optic interaction efficiency in the SOI platform and holds significant potential for microwave photonic filters and high spatial resolution sensing.

Analyzing the Performance of Microcomb Based Microwave Photonic Signal Processors with Different Signal Waveforms

Analyzing the Performance of Microcomb Based Microwave Photonic Signal Processors with Different Signal Waveforms

Processing Accuracy of Microcomb-Based Microwave Photonic Signal Processors for Different Input Signal Waveforms

Microwave photonic (MWP) signal processors, which process microwave signals based on photonic technologies, bring advantages intrinsic to photonics such as low loss, large processing bandwidth, and strong immunity to electromagnetic interference. Optical microcombs can offer a large number of wavelength channels and compact device footprints, which make them powerful multi-wavelength sources for MWP signal processors to realize a variety of processing functions. In this paper, we experimentally demonstrate the capability of microcomb-based MWP signal processors to handle diverse input signal waveforms. In addition, we quantify the processing accuracy for different input signal waveforms, including Gaussian, triangle, parabolic, super Gaussian, and nearly square waveforms. Finally, we analyse the factors contributing to the difference in the processing accuracy among the different input waveforms, and our theoretical analysis well elucidates the experimental results. These results provide guidance for microcomb-based MWP signal processors when processing microwave signals of various waveforms.

Silicon-Organic Hybrid Electro-Optic Modulator and Microwave Photonics Signal Processing Applications.

Electro-optic modulator (EOM) is one of the key devices of high-speed optical fiber communication systems and ultra-wideband microwave photonic systems. Silicon-organic hybrid (SOH) integration platform combines the advantages of silicon photonics and organic materials, providing a high electro-optic effect and compact structure for photonic integrated devices. In this paper, we present an SOH-integrated EOM with comprehensive investigation of EOM structure design, silicon waveguide fabrication with Slot structure, on-chip poling of organic electro-optic material, and characterization of EO modulation response. The SOH-integrated EOM is measured with 3 dB bandwidth of over 50 GHz and half-wave voltage length product of 0.26 V·cm. Furthermore, we demonstrate a microwave photonics phase shifter by using the fabricated SOH-integrated dual parallel Mach-Zehnder modulator. The phase shift range of 410° is completed from 8 GHz to 26 GHz with a power consumption of less than 38 mW.

Wideband‐Tunable on‐Chip Microwave Photonic Filter with Ultrahigh‐Q U‐Bend‐Mach–Zehnder‐Interferometer‐Coupled Microring Resonators

AbstractMicrowave photonic filters are a key fundamental subsystem in microwave photonics. A wideband‐tunable on‐chip microwave photonic filter (MPF), which monolithically integrates a dual‐drive Mach‐Zehnder modulator (DDMZM), is proposed with ultrahigh‐Q Mach–Zehnder‐interferometer (MZI)‐coupled microring resonators (MRRs) in cascade and a high‐speed photodetector (PD). It is the first time an MPF has been developed by introducing U‐bend‐MZI‐coupled MRRs whose resonance wavelength and 3 dB bandwidth are tunable. In particular, the ultrahigh‐Q U‐bend‐MZI‐coupled MRRs are realized with ultralow loss broadened silicon waveguides based on a modified Euler curve. For the fabricated U‐bend‐MZI‐coupled MRRs, which have an effective radius of 29 µm, the Q‐factor is as high as 1.3 × 106, while the free spectral range (FSR) is as large as 113 GHz. Furthermore, the introduction of two cascaded U‐bend‐MZI‐coupled MRRs enables the MPF to have flat‐top bandstop (or bandpass) responses with a high extinction ratio (ER) of 20–35 dB as well as a tunable 3 dB bandwidth of 0.15–3 GHz. Meanwhile, the central frequency can be tuned thermally from 2 to 40 GHz. The work provides a feasible route to realize a compact, high spectral resolution, and wideband‐tunable MPF on silicon, enabling a range of RF applications from wireless communication to flexible high‐frequency microwave photonic signal processing.

Tunable bandpass microwave photonic filter with largely reconfigurable bandwidth and steep shape factor based on cascaded silicon nitride micro-ring resonators.

Bandpass microwave photonic filter (MPF) can be achieved based on the well-known phase to intensity conversion method by using phase modulation and single micro-ring resonator (MRR) notch filter. Since MRR could introduce residual phase in handling one optical sideband, the out-of-band radio frequency (RF) rejection ratio and the shape factor of the bandpass MPF are very limited. Here, by introducing another MRR to handle the other optical sideband, the residual phase can be greatly suppressed, thus the filter's performance can be greatly improved. The proposed bandpass MPF was both verified theoretically and experimentally. Compared with the single MRR, the out-of-band RF rejection ratio and the shape factor were improved by 20 dB and 1.67, respectively. Furthermore, the bandpass MPF's bandwidth is reconfigurable by adjusting the optical carrier's frequency or the two MRRs' amplitude coupling coefficients. The bandpass MPF's center frequency is also tunable by changing the resonant wavelengths of two MRRs in the opposite direction simultaneously. Experimentally, bandwidth reconfiguration from 0.38 GHz to 15.74 GHz, the shape factor optimization from 2 to 1.23, and frequency tuning from 4 GHz to 21.5 GHz were achieved. We believe that the proposed bandpass MPF has great potential for microwave photonic signal processing.

On-chip non-uniformly spaced multi-channel microwave photonic signal processor based on an ultrahigh-Q multimode micro-disk resonator.

Multi-channel microwave photonic (MWP) signal processing can simultaneously perform different task operations on multiple signals carried by multiple wavelengths, which holds great potential for ultrafast signal processing and characterization in a wavelength-division-multiplexed (WDM) network. As emerging telecommunication services create more data, an elastic optical network, which has a flexible and non-uniform spectrum channel spacing, is an alternative architecture to meet the ever-increasing data transfer need. Here, for the multi-channel ultra-fast signal processing in the elastic optical network, we propose and demonstrate an on-chip non-uniformly spaced multi-channel microwave photonic signal processor based on an ultrahigh-Q multimode micro-disk resonator (MDR). In the proposed signal processor, an MDR supporting multiple different order whispering-gallery modes (WGMs) with an ultrahigh Q-factor is specifically designed. Benefiting from the large and different free spectral ranges (FSRs) provided by the different order WGMs, a non-uniformly spaced multi-channel microwave photonic signal processor is realized, and various processing functions are experimentally demonstrated including bandpass filtering with a narrow passband of 103 MHz, a rejection ratio of 22.3 dB and a frequency tuning range from 1 to 30 GHz, multiple frequency measurement with a frequency measurement range from 1 to 30 GHz, a frequency resolution better than 200 MHz and a measurement accuracy of 91.3 MHz, and phase shifting with a phase tuning range from -170°∼160°, an operational bandwidth of 26 GHz from 6 GHz to 32 GHz and a small power variation of 0.43 dB. Thanks to the coexistence of different order WGMs supported by the MDR, non-uniformly spaced multi-channel signal processing is enabled with the key advantages including a broad operation bandwidth, an ultra-narrow frequency selectivity, and a large phase tuning range with a small power variation. The proposed signal processor is promising to be widely used in future elastic optical networks with flexible spectrum grids.

Acousto-optic reconfigurable filter based on vector mode fusion in dispersion-compensating fiber.

An acousto-optic reconfigurable filter (AORF) is proposed and demonstrated based on vector mode fusion in dispersion-compensating fiber (DCF). With multiple acoustic driving frequencies, the resonance peaks of different vector modes in the same scalar mode group can be effectively fused into a single peak, which is utilized to obtain arbitrary reconfiguration of the proposed filter. In the experiment, the bandwidth of the AORF can be electrically tuned from 5 nm to 18 nm with superposition of different driving frequencies. The multi-wavelength filtering is further demonstrated by increasing the interval of the multiple driving frequencies. The bandpass/band-rejection can also be electrically reconfigured by setting the combination of driving frequencies. The proposed AORF gains the feature of reconfigurable filtering types, fast and wide tunability, and zero frequency shift, which is advantageous for high-speed optical communication networks, tunable lasers, fast optical spectrum analyzing and microwave photonics signal processing.

RF Frequency Selective Switch by Multiple PMIM Conversions

Nowadays, broadband and multi-channel radio frequency (RF) processing has been widely used in communication, radar, countermeasure, and other applications. At present, multiple-input and multiple-output (MIMO)-oriented microwave photonic signal processing technology is relatively scarce, so this paper proposes an RF frequency selective switch (FSS) based on multiple phase modulation to intensity modulation (PMIM) conversions. PMIM conversion has been used in narrowband microwave photonic filtering in the past. We extend it to a wideband and arbitrarily reconfigurable RF spectrum processing unit through an optical frequency comb and periodic optical filter. Although we use the incoherent combination of a multi-wavelength light source, we can obtain any frequency response including rectangles only by using all positive tap coefficients. Using an optical wavelength selective switch (WSS), we obtain RF FSS, and the spectral resolution of RF FSS is much better than that of optical WSS, which is improved by more than two orders of magnitude. The above principles, including single-channel reconfigurable filtering and multi-channel RF FSS, are verified by experiments. Our technology provides a stable solution for future RF MIMO signal processing.

Chip-Based Brillouin Processing for Microwave Photonic Phased Array Antennas

In this review paper, we provide perspectives on the implementation of high-performance, wideband, chip-based Brillouin microwave photonic processing subsystems for use in phased array antennas that require processing at every antenna element. We review recent advances in chip-scale Brillouin microwave photonic signal processing systems, including reconfigurable filters, frequency converters, tunable phase shifters, true time delays and microwave sources, which are key functionalities for phased array antennas. We discuss a roadmap for developments of Brillouin-based microwave photonic processors to reach the required performance and compact footprint for implementation in future dynamically reconfigurable phased array antenna systems.

Microwave Frequency Dividers With Reconfigurable Fractional 2/N and 3/N Division Ratios

Two microwave photonic signal processing structures, which are capable to realise microwave frequency division with a tunable integer or non-integer division ratio, are presented. They are based on applying an input RF signal to a Mach Zehnder modulator, which is biased to generate a carrier-suppressed double sideband (DSB) or single sideband (SSB) optical signal. The carrier-suppressed DSB optical signal consists of the upper and lower 1 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">st</sup> order sidebands with a separation of two times the input RF signal frequency. The carrier of the SSB optical signal is suppressed by a fibre Bragg grating (FBG) connected to the modulator output. Hence the FBG output consists of the upper 1 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">st</sup> order and lower 2 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">nd</sup> order sidebands with a separation of three times the input RF signal frequency. The carrier-suppressed DSB or SSB optical signal is injected into a semiconductor laser. The semiconductor laser is oscillated in the period-one state that generates a number of equally spaced frequency components, which are frequency locked by the injection light wave. Beating of these optical frequency components at the photodetector produces an RF signal with a frequency of 2/ <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">N</i> or 3/ <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">N</i> times the input RF signal frequency where <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">N</i> can be between 3 and 6. Hence the 2/ <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">N</i> frequency divider can realise 2/3, 1/2, 2/5 and 1/3 frequency division operation, and the 3/ <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">N</i> frequency divider can realise 3/4, 3/5 and 1/2 frequency division operation. The proposed 2/ <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">N</i> and 3/ <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">N</i> frequency dividers have a very simple structure compared to the reported photonics-based microwave frequency divider that can realise both integer and non-integer frequency divisions. The frequency division ratio can be tuned by simply adjusting the forward bias current of the semiconductor laser subject to optical injection. Experimental results demonstrate the two proposed structures can realise microwave frequency division with a tunable integer and non-integer division ratio for different input RF signal frequencies of 10 to 18 GHz, and over 60 dB output signal-to-noise ratio performance. More than 27 dB suppression in the unwanted frequency components around the frequency divided signal is also demonstrated.

Integrated Subwavelength Grating Waveguide Bragg Gratings for Microwave Photonics

Bragg gratings (BGs) have numerous applications in microwave photonic (MWP) signal processing and MWP systems due to the ability to obtain custom-designed amplitude and phase responses. Moreover, waveguide BGs (WBGs) are compact and can be readily integrated with other passive and active components to realize MWP building blocks and processing systems. Subwavelength grating (SWG) waveguides and passive devices in silicon-on-insulator (SOI) have emerged as an enabler for developing break-through devices based on anisotropic metamaterials. In this paper, we review recent advances on developing SWG WBGs in SOI, including chirped, phase-shifted, sampled, and polarization (in)dependent structures. Applications of these SWG WBGs in MWP are described.

IOT-Based Injection-Locked Microwave Photonic Frequency Division Signal Processing

When building an injection-locked microwave photonic frequency division signal processing model for the Internet of Things, the waveform and frequency of the microwave have an important impact on its performance. How to optimize and adjust the injection-locked microwave photonic frequency division signal processing effect needs more research and exploration. Taking the traditional mode architecture as a reference, this paper constructs an injection-locked microwave photonic frequency division signal processing model based on the Internet of Things. In this paper, the popular deep analysis method is used to optimize the model, and the photonic technology is matched with the microwave analysis. The purpose of this construction is to weaken the microwave integration error and improve the calculation accuracy to a higher level. In addition, aiming at the difficult problem of microwave signal generation, this paper uses the optical injection method to lock the microwave photons and generate waveform signals, which makes the model data more representative, so as to solve the problems of unstable microwave signals and high transmission costs. This paper also discusses the possibility of microwave photon filtering and frequency division signal processing of microwaves. The optimal solution is determined by analyzing the experimental results of various technical means, thus proving that the injection-locked microwave photonic frequency division signal processing means has better stability and a higher fitting degree.

Reconfigurable Microwave Photonic Filter Based on Space-Division Multiplexing Powered by Artificial Neural Networks

Space-division multiplexing (SDM) techniques bring new approaches for various applications in microwave photonic signal processing. In this work, an all-fiber reconfigurable microwave photonic filter (MPF) is realized based on SDM techniques using multicore fiber (MCF) and multimode fiber (MMF). The multimode interference (MMI) generated from the proposed MCF-MMF-MCF structure can be manipulated in dimensions of space and wavelength simultaneously, thus configuring the power distribution in all the taps of the MPF. The trained artificial neural network can accurately predict the operating wavelength and spatial input core for a target power distribution. In a low-cost, light-weight, and compact way, SDM fibers combined with MMI allow for greater flexibility and diversity in the response of the reconfigurable MPF.

Simple and All-Optical In-Phase and Quadrature Phase Generation Techniques

New microwave photonic signal processing structures for generating in-phase and quadrature phase RF signals are presented. They are based on designing the bias angles of a dual-drive Mach Zehnder modulator (DDMZM) or a dual-parallel Mach Zehnder modulator (DPMZM) to introduce a specific phase shift to the optical carrier and using a wavelength division multiplexer to separate the lower and upper RF modulation sidebands. The optical carrier beat with the sidebands in a pair of photodetectors generate two output RF signals with a quadrature phase difference. The two proposed structures are simple, low cost and free of electrical components. The upper operating frequency of the two microwave photonic signal processors is only limited by the optical modulator bandwidth. Experimental results demonstrate the proposed microwave photonic signal processing structures have the ability to generate in-phase and quadrature phase signals with small phase and amplitude imbalance, over a wide frequency range.

Radio Frequency and Microwave Photonic Signal Processing and Generation Based on Optical Kerr Micro-Combs

Radio Frequency and Microwave Photonic Signal Processing and Generation Based on Optical Kerr Micro-Combs

All-Optical In-Phase/Quadrature Microwave Mixer for Antenna Remoting Applications

A new microwave photonic signal processing structure for realising in-phase/quadrature (I/Q) mixing is presented. It is based on a dual-drive Mach Zehnder modulator (DDMZM) and an optical phase modulator inside a Sagnac loop interferometer. Two output IF signals with a quadrature phase difference are obtained by using two photodetectors to detect the upper and lower sidebands of the optical signal at the Sagnac loop output. A quadrature phase difference in the two IF signals is realised by biasing the DDMZM at the quadrature point. This has the advantage of very little quadrature phase errors as a standard modulator bias controller can accurately lock the DDMZM bias point. The optical phase modulator driven by an RF signal can be placed in a remote location for antenna remoting. Theoretical analysis and simulation show using the proposed I/Q mixer for image rejection can overcome the modulation index dependent image rejection ratio problem in the reported I/Q mixers based on a cascaded modulator structure. The Sagnac loop based I/Q mixer is experimentally verified with results show only ±1° quadrature phase error and more than 50 dB image rejection ratio over the operating frequency range of 6 to 20 GHz.