Microstructure Of Laser Welded Joints Research Articles

Effect of Carburization on the Microstructure and Laser Weldability of 316L Stainless Steel

This study aims to investigate the influence of the carburizing layer on the microstructure of laser-welded joints in 316L stainless steel, aiming to enhance the properties of stainless steel components through the incorporation of carburization. Through a comprehensive experimental approach, including nanoindentation and Vickers hardness measurements, the microstructural analysis of the laser-welded specimens was conducted. The nanoindentation results reveal a significant increase in hardness, with the carburizing layer exhibiting a remarkable 215% improvement compared to the base material. In order to effectively harness the wear resistance for various applications, the examination of macroscopic characteristics in laser-welded joints reveals the necessity of regulating heat input and minimizing defects to attain welds of superior quality. Additionally, the phase transformation behavior of stainless steel during welding was found to be altered due to dilution in the fusion zone and the presence of high carbon content in the heat-affected zone of the carburizing layer. Overall, this research provides valuable insights into the microstructural changes induced by carburization and its implications for the welding performance and mechanical properties of stainless steel.

Concurrent laser welding and annealing exploiting robotically manipulated optical fibers

Present investigation reports on the effects of incorporating pre- and post-heating on the mechanical properties of laser-welded joints, in normal air condition. Two common types of steels, i.e. mild steel, and stainless steel were welded with Lumonic's MS 830 Nd 3+:YAG laser machine, with an output capacity of 400 W. Due to the low integrated energy input required for laser welded joints, the welded region are often cooled too rapidly via conduction to the surrounding material and atmosphere, which leads to hardness discontinuities in the fusion and heat affected zone. The effects of in-process laser annealing on the mechanical properties and microstructure of laser-welded joints are important in any manufacturing operation. To improve the poor weld characteristics, this work investigates the use of automated dual-beam delivery system to implement a pre- or post-heating technique, simultaneously with the welding process. The results show that proper selection of the control parameters for the pre- or post-heating can reduce the hardness of the weld significantly and improve the welded joints mechanical properties, such as higher tensile strength and better durability.