Microplastics In Sediments Research Articles

Microplastics in Sediment and Surface Water of West Dongting Lake and South Dongting Lake: Abundance, Source and Composition.

Microplastic pollution was investigated in sediment and surface water in West Dongting Lake and South Dongting Lake for the first time. The abundance of microplastics ranged from 616.67 to 2216.67 items/m3 and 716.67 to 2316.67 items/m3 in the lakeshore surface water of West Dongting Lake and South Dongting Lake, respectively. The highest levels of microplastic pollution were found in the lakes’ outlets. In the lake center sites of the West Dongting Lake and South Dongting Lake, the abundance of microplastics ranged from 433.33 to 1500 items/m3 and 366.67 to 1566.67 items/m3, respectively. Meanwhile, the study found that in lakeshore sediment of West Dongting Lake and South Dongting Lake, microplastic concentrations ranged from 320 to 480 items/m3 and 200–1150 items/m3. Polystyrene (PS) and polyethylene terephthalate (PET) were most common in the surface water and sediment samples, respectively. In addition, we suggest that the effects of polymer types in microplastics should be taken into account when considering abundance. This study can provide valuable points of reference to better understanding microplastic pollution in inland freshwater areas.

Microplastic abundance and characteristics in French Atlantic coastal sediments using a new extraction method

The ubiquitous presence of microplastics (MPs) has been demonstrated in all environmental compartments in the recent years. They are detected in air, freshwater, soil, organisms and particularly in marine ecosystems. Since sediments are known to be the major sink of many organic and inorganic pollutants, the aim of this study was to develop and validate a fast and cheap methodology to assess the MP contamination in intertidal sediments from the Gulf of Biscay (Pays de la Loire region, France). Sediments were sampled at three locations (Pays de la Loire region, France) and during two seasons: October 2015 and March 2016. The analytical protocol involved MP extraction from dried sediments using milliQ water and a centrifugation technique. After a filtration step of supernatants, MPs were detected and directly identified on the membrane filters using μFTIR spectroscopy in reflection mode. For the first time, the number of replicates allowing to obtain a satisfying representativeness of the whole sampled sediment was also evaluated at 10 replicates of 25 g each. The average number of MPs in sediments was 67 (±76) MPs/kg dw (N = 60) with no significant difference between sites and seasons. Ten different compositions of MPs were defined by μFT-IR with a high proportion of polypropylene (PP) and polyethylene (PE), 38 and 24%, respectively. Among MPs, mainly fragments (84%) were observed with main size classes corresponding to [>100 μm] and [50–100 μm] but no particles > 1 mm could be found suggesting that mainly small microplastics (<1 mm) were subject to vertical transport.

Microplastics in Galway Bay: A comparison of sampling and separation methods

Microplastics, an emerging pollutant, are recognised as having a ubiquitous distribution in the environment. Currently several benthic sampling tools are being employed to collect subtidal marine sediment, however, there are no comparative studies on the efficiency of these tools to sample for microplastics or the subsequent extraction methods of microplastics from these marine sediments. This study addresses these knowledge gaps by comparing commonly applied benthic sampling tools (Van Veen grab, box corer, gravity corer) and a variety of density separation methods (elutriation column, sodium chloride solution, sodium tungstate dihydrate solution) for microplastic collection and processing.Each sampling tool was tested at the same station and the collected sediment was used to assess the extraction performance for the different density separation techniques. No statistically significant differences were found between the concentrations of microplastics extracted for any of the sampling tools. However, there were significant differences between the density separation methods using sodium tungstate dihydrate and sodium chloride solution and the elutriation method. This preliminary study provides evidence that the sampling tools tested are both suitable and proficient at determining the abundance of microplastics in sediments. Sodium tungstate dihydrate proved to be a novel and feasible option for dense liquid separation of microplastics in subtidal marine sediments. These results will allow for more confidence in data quality when comparing future surveys applying different benthic sampling tools.

Preferential accumulation of small (

Microplastics are a global concern for their threat to marine ecosystems. Recent studies report a lack of smaller microplastics (<300 μm) in oceans attributed to a “loss in ocean”. Several hypotheses have been proposed to explain the absence of smaller microplastics, but their fate and transport remain an enigma. Our study recovered high concentrations of microplastics (32947 ± 15342 items kg−1 dry sediment) from sediments of a coastal plain river network in eastern China, with the <300 μm fraction accounting for ∼85% of total microplastic particles. Microplastic concentrations were generally higher in sediments from tributary streams and streams surrounded by industrial land use. The high variability of microplastics within the watershed indicates that the distribution of microplastics is regulated by several factors, such as distance to source(s), river flow characteristics, buoyancy behavior, degradation, etc. Fragment and foam forms dominated the small microplastics, while fibers were less prevalent in the <300 μm fraction and more abundant in downstream sites. The dominance of small microplastics in riverine sediments in this study provides a possible mechanism to explain the relative absence of small microplastics in the ocean, and advocates for quantification of the whole size spectrum of microplastics in future studies of riverine microplastic fluxes.

Microplastic pollution in sediments from the Bohai Sea and the Yellow Sea, China

Microplastics are one of the most significant pollutants in the marine environment and accumulate in sediments all over the world. To assess the pollution level in the marine environment in China, the distribution and abundance of microplastics in sediments from the Bohai Sea and the Yellow Sea were investigated in this study. The sediment samples were collected from 72 different sites in the Bohai Sea and the Yellow Sea. Microplastics were separated from sediment through density flotation and categorized according to shape and size under a microscope. Additionally, polymer types were identified using Fourier-Transform Infrared Micro-spectroscopy (μ-FT-IR). Our study demonstrated that microplastics were consistently found in all samples, which emphasized their extensive distribution throughout the Bohai Sea and the Yellow Sea. The average microplastic abundance was 171.8, 123.6 and 72.0 items per kg of dry weight sediment for the Bohai Sea, Northern Yellow Sea and Southern Yellow Sea, respectively. Among the sampled microplastics, fiber (93.88%) and small microplastics (<1000 μm) (71.06%) were the most frequent types. Fourier transform infrared microspectroscopy (μ-FT-IR) analysis determined that the main types of microplastics were rayon (RY), polyethylene (PE) and polyethylene terephthalate (PET). Our results highlighted the widespread distribution of microplastics in sediments from the Bohai Sea and the Yellow Sea and provided useful information for evaluating the environmental risks of microplastics in China.

Microplastics in sediments from the littoral zone of the north Tunisian coast (Mediterranean Sea)

The distribution of microplastics (MPs) was investigated in the sediments of five sampling sites from the northern Tunisian coast during June 2017. MPs were categorized according to type, colour and size. Representative MPs from the five sites were isolated for polymer identification using Fourier Transformed Infrared Spectroscopy in attenuated total reflectance mode (FTIR-ATR). Results showed that MPs were recovered, from all sediment samples, indicating for the first time, their extensive distribution in Tunisian coast. Concentrations varied from 141.20 ± 25.98 to 461.25 ± 29.74 items kg−1 dry weight. Fibres, fragments, Styrofoam®, pellets and films were the types registered in this study. With the exception of Menzel Bourguiba (MB), fibres significantly outnumbered plastic particles followed by fragments, Styrofoam®, films and pellets. The predominant colours are as follows: black > clear > white > red > blue > green for fibres, blue > white > clear > red > green > yellow > black for fragments, blue > white > black > clear for films while only white pellets and Styrofoam® were found. MPs particles ranged from 0.1 to 5 mm in length. A total of three polymer types were identified, polyethylene (PE), polypropylene (PP) and polystyrene (PS). Except for industrial pellets, the presence of MPs is likely due to the degradation of marine plastic debris accumulating in each site. This work provides original data of the presence of MPs in coastal sediments from Northern Tunisian coast.

Environmentally relevant concentrations of polyethylene microplastics negatively impact the survival, growth and emergence of sediment-dwelling invertebrates.

Microplastics are a widespread environmental pollutant in aquatic ecosystems and have the potential to eventually sink to the sediment, where they may pose a risk to sediment-dwelling organisms. While the impacts of exposure to microplastics have been widely reported for marine biota, the effects of microplastics on freshwater organisms at environmentally realistic concentrations are largely unknown, especially for benthic organisms. Here we examined the effects of a realistic concentration of polyethylene microplastics in sediment on the growth and emergence of a freshwater organism Chironomus tepperi. We also assessed the influence of microplastic size by exposing C.tepperi larvae to four different size ranges of polyethylene microplastics (1-4, 10-27, 43-54 and 100-126 μm). Exposure to an environmentally relevant concentration of microplastics, 500 particles/kgsediment, negatively affected the survival, growth (i.e. body length and head capsule) and emergence of C.tepperi. The observed effects were strongly dependent on microplastic size with exposure to particles in the size range of 10-27 μm inducing more pronounced effects. While growth and survival of C.tepperi were not affected by the larger microplastics (100-126 μm), a significant reduction in the number of emerged adults was observed after exposure to the largest microplastics, with the delayed emergence attributed to exposure to a stressor. While scanning electron microscopy showed a significant reduction in the size of the head capsule and antenna of C.tepperi exposed to microplastics in the 10-27 μm size range, no deformities to the external structure of the antenna and mouth parts in organisms exposed to the same size range of microplastics were observed. These results indicate that environmentally relevant concentrations of microplastics in sediment induce harmful effects on the development and emergence of C.tepperi, with effects greatly dependent on particle size.

Microplastics in sediment from Skudai and Tebrau river, Malaysia: a preliminary study

Plastic debris floating on surface water has now become an environmental issues concerning its abundance and fate. Generally, plastic debris that are fragmented into less than 5 mm in size is known as microplastics (MP). To date, discovery on the occurrence and impacts of MP in marine environments have been reported by many studies. However, less investigation has been carried out in freshwater environments. The occurrence of MP in Malaysia is also unknown. Thus, the present study has characterised the abundance of MP between Skudai and Tebrau River. The quantification of MP levels in these channels are pertinent since both rivers are listed among polluted rivers in Malaysia with high amount of rubbish. Surface sediments were collected with a box corer and MP were extracted via density separation. The inspection of particles was carried out under microscope and were categorized based on shape, colour, and size. Preliminary results showed that the concentration of MP was much higher in Tebrau than of Skudai River. The study demonstrates that the abundance of MPs in both urban rivers may possibly be affected by weathering breakdown of large plastic materials since these locations are well-known for fishing and industrial areas.

Microplastics in freshwater river sediments in Shanghai, China: A case study of risk assessment in mega-cities.

Microplastics, which are plastic debris with a particle diameter of less than 5mm, have attracted growing attention in recent years. Its widespread distributions in a variety of habitats have urged scientists to understand deeper regarding their potential impact on the marine living resources. Most studies on microplastics hitherto are focused on the marine environment, and research on risk assessment methodology is still limited. To understand the distribution of microplastics in urban rivers, this study investigated river sediments in Shanghai, the largest urban area in China. Seven sites were sampled to ensure maximum coverage of the city's central districts, and a tidal flat was also included to compare with river samples. Density separation, microscopic inspection and μ-FT-IR analysis were conducted to analyze the characteristics of microplastics and the type of polymers. The average abundance of microplastics in six river sediment samples was 802 items per kilogram of dry weight. The abundance in rivers was one to two orders of magnitude higher than in the tidal flat. White microplastic spheres were most commonly distributed in river sediments. Seven types of microplastics were identified, of which polypropylene was the most prevailing polymers presented. The study then conducted risk assessment of microplastics in sediments based on the observed results, and proposed a framework of environmental risk assessment. After reviewing waste disposal related legislation and regulations in China, this study conclude that in situ data and legitimate estimations should be incorporated as part of the practice when developing environmental policies aiming to tackle microplastic pollution.

Screening for microplastics in sediment, water, marine invertebrates and fish: Method development and microplastic accumulation

Measurements of microplastics in biota and abiotic matrices are key elements of exposure and risk assessments for this emerging environmental pollutant. We investigated the abundance of microplastics in field-collected biota, sediment and water. An improved sediment extraction method, based on density separation was developed. For analysis of microplastics in biota we found that an adapted enzymatic digestion protocol using proteinase K performed best, with a 97% recovery of spiked plastic particles and no observed degradation effects on the plastics in subsequent Raman analysis. Field analysis revealed that 8 of 9 tested invertebrate species from the North Sea and 68% of analyzed individuals of brown trout (Salmo trutta) from the Swedish West Coast had microplastics in them. Based on the number of plastic particles per kg d.w. the microplastic concentrations found in mussels were approximately a thousand-fold higher compared to those in sediment and surface water samples from the same location.

The First Evaluation of Microplastics in Sediments from the Complex Lagoon-Channel of Bizerte (Northern Tunisia)

Microplastics (MPs) in sediments from the complex lagoon-channel of Bizerte were investigated, for the first time, to evaluate the occurrence and abundance of MPs in Tunisia. After density separation in saline solution, MPs were counted by a stereomicroscope. The number of MPs was at the range of 3–18 items/g sediment (3000–18,000 items/kg dry sediment) and the most contaminated site was of Menzel Abderrahmane (MA) followed by Carrier Bay (CB), Menzel Jemil (MJ) and Channel of Bizerte (C). The MPs gathered during the survey varied in size from 0.3 to 5 mm, and appear in a variety of shapes and colours. The dominant shape was fibre (88.88% in MA, 91.00% in CB, 82.35% in C and 21.05% in MJ). The rest of MPs are fragments whilst no micro beads were found. Colours are clear, white, blue, green, red and black. Cities discharges, fishing activity and industrial production sites are the most likely sources of MPs. This first work provides original data on the presence of MPs that determines their bioavailability to organisms as seafood, and then possibly transfers of to human. The high MP concentrations registered in the complex lagoon-channel of Bizerte suggest that this site is a hotspot for MP pollution and there is an urgency to understand their origins and effects on marine life. The results will provide useful background information for further investigations.

Microplastics in Sediment Cores from Asia and Africa as Indicators of Temporal Trends in Plastic Pollution.

Microplastics (<5mm) were extracted from sediment cores collected in Japan, Thailand, Malaysia, and South Africa by density separation after hydrogen peroxide treatment to remove biofilms were and identified using FTIR. Carbonyl and vinyl indices were used to avoid counting biopolymers as plastics. Microplastics composed of variety of polymers, including polyethylene (PE), polypropylene (PP), polystyrene (PS), polyethyleneterphthalates (PET), polyethylene-polypropylene copolymer (PEP), and polyacrylates (PAK), were identified in the sediment. We measured microplastics between 315µm and 5mm, most of which were in the range 315µm-1mm. The abundance of microplastics in surface sediment varied from 100 pieces/kg-dry sediment in a core collected in the Gulf of Thailand to 1900 pieces/kg-dry sediment in a core collected in a canal in Tokyo Bay. A far higher stock of PE and PP composed microplastics in sediment compared with surface water samples collected in a canal in Tokyo Bay suggests that sediment is an important sink for microplastics. In dated sediment cores from Japan, microplastic pollution started in 1950s, and their abundance increased markedly toward the surface layer (i.e., 2000s). In all sediment cores from Japan, Thailand, Malaysia, and South Africa, the abundance of microplastics increased toward the surface, suggesting the global occurrence of and an increase in microplastic pollution over time.

Microplastics in sediments of the Changjiang Estuary, China

Microplastics are plastics that measure less than 5 mm in diameter. They enter the marine environment as primary sources directly from industrial uses, as well as secondary sources resulting from the degradation of large plastic debris. To improve the knowledge of microplastic pollution in China, we investigated samples from 53 estuarine sediment locations collected with a box corer within the Changjiang Estuary. Microplastics (<5 mm) were extracted from sediments by density separation, after which they were observed under a microscope and categorized according to shape, color and size. Identification was carried out using Micro-Fourier-Transform Infrared Spectroscopy (μ-FT-IR).The abundance of microplastics in the Changjiang Estuary was mapped. The mean concentration was 121 ± 9 items per kg of dry weight, varying from 20 to 340 items per kg of dry weight. It was found that the concentration of microplastics was the highest on the southeast coast of Shanghai. The distribution pattern of microplastics may be affected by the Changjiang diluted water in summer. All of the microplastics collected were categorized according to shape, color and size. Among which fiber (93%), transparent (42%) and small microplastics (<1 mm) (58%) were the most abundant types. No clear correlation between microplastics and the finer sediment fraction was found. Rayon, polyester, and acrylic were the most abundant types of microplastics identified, indicating that the main source of microplastics in the Changjiang Estuary was from washing clothes (the primary source). It is possible to compare microplastic abundance in this study with the results of other related studies using the same quantification method. The identification of microplastics raises the awareness of microplastic pollution from drainage systems. The prevalence of microplastic pollution calls for monitoring microplastics at a national scale on a regular basis.

A review of analytical techniques for quantifying microplastics in sediments

In this review the analytical techniques for measuring microplastics in sediment have been evaluated.

Microplastic pollution in Vembanad Lake, Kerala, India: The first report of microplastics in lake and estuarine sediments in India

We present the first study of microplastics in the sediments of Vembanad Lake, a Ramsar site in India. Microplastics are emerging pollutants of increasing environmental concern with a particle size of <5 mm, which originate from successive degradation of larger plastic debris or are manufactured as small granules and used in many applications. The impact of microplastics pollution on the environment and biota is not well known. Vast data exist in the literature on marine microplastics while reports on freshwater ecosystems are scarce. In this context, to examine the occurrence of microplastic particles (MPs) in the Vembanad Lake, samples were collected from ten sites and processed for microplastic extraction through density separation. Identification of the polymer components of MPs was done using micro Raman spectroscopy. MPs were recovered from all sediment samples, indicating their extensive distribution in the lake. The abundance of MPs recorded from the sediment samples is in the range of 96–496 particles m−2 with a mean abundance of 252.80 ± 25.76 particles m−2. Low density polyethylene has been identified as the dominant type of polymer component of the MPs. As clams and fishes are the major source of protein to the local population, the presence of MPs in the lake becomes critically important, posing a severe threat of contaminating the food web of this lake. This study, being the first report from India on MPs in lake sediments, provide impetus for further research on the distribution and impact of this emerging pollutant on the biota of many aquatic systems spread across India.

Differential bioavailability of polychlorinated biphenyls associated with environmental particles: Microplastic in comparison to wood, coal and biochar

Microplastic particles are increasingly being discovered in diverse habitats and a host of species are found to ingest them. Since plastics are known to sorb hydrophobic organic contaminants (HOCs) there is a question of what risk of chemical exposure is posed to aquatic biota from microplastic-associated contaminants. We investigate bioavailability of polychlorinated biphenyls (PCBs) from polypropylene microplastic by measuring solid-water distribution coefficients, gut fluid solubilization, and bioaccumulation using sediment invertebrate worms as a test system. Microplastic-associated PCBs are placed in a differential bioavailability framework by comparing the results to several other natural and anthrogenic particles, including wood, coal, and biochar. PCB distribution coefficients for polypropylene were higher than natural organic materials like wood, but in the range of lipids and sediment organic carbon, and smaller than black carbons like coal and biochars. Gut fluid solubilization potential increased in the order: coal < polypropylene < biochar < wood. Interestingly, lower gut fluid solubilization for polypropylene than biochar infers that gut fluid micelles may have solubilized part of the biochar matrix while bioaccessibility from plastic can be limited by the solubilizing potential of gut fluids dependent on the solid to liquid ratio or renewal of fluids in the gut. Biouptake in worms was lower by 76% when PCBs were associated with polypropylene compared to sediment. The presence of microplastics in sediments had an overall impact of reducing bioavailability and transfer of HOCs to sediment-ingesting organisms. Since the vast majority of sediment and suspended particles in the environment are natural organic and inorganic materials, pollutant transfer through particle ingestion will be dominated by these particles and not microplastics. Therefore, these results support the conclusion that in most cases the transfer of organic pollutants to aquatic organisms from microplastic in the diet is likely a small contribution compared to other natural pathways of exposure.

Occurrence of microplastics in the coastal marine environment: First observation on sediment of China

Microplastics in sediments from the Beibu Gulf and the coastline of China Sea were investigated to evaluate the occurrence and abundance of microplastics in China for the first time. Microplastics (<5mm) were taken from sediments by a flotation method. The number of microplastics was counted by a fluorescence microscope, an instrument that is rarely used in the detection of microplastics in sediments. This instrument led to results that were satisfactory. Compared with other sampled areas, microplastics were found in massive concentrations in China. Four types of microplastics, HDPE, PET, PE and PS, were identified. The results will provide useful background information for further investigations.

Microplastics in sediments: A review of techniques, occurrence and effects

Microplastics are omnipresent in the marine environment and sediments are hypothesized to be major sinks of these plastics. Here, over 100 articles spanning the last 50 year are reviewed with following objectives: (i) to evaluate current microplastic extraction techniques, (ii) to discuss the occurrence and worldwide distribution of microplastics in sediments, and (iii) to make a comprehensive assessment of the possible adverse effects of this type of pollution to marine organisms. Based on this review we propose future research needs and conclude that there is a clear need for a standardized techniques, unified reporting units and more realistic effect assessments.

Intertidal Concentrations of Microplastics and Their Influence on Ammonium Cycling as Related to the Shellfish Industry.

Microplastics are ubiquitous within the marine environment. The last 10 years have seen research directed at understanding the fate and effect of microplastics within the marine environment; however, no studies have yet addressed how concentrations of these particles could affect sedimentary processes such as nutrient cycling. Herein we first determine the concentration and spatial distribution of microplastics within Baynes Sound, a key shellfish-growing area within coastal British Columbia (BC). We also determined sediment grain size and % organic matter (OM) such that we could relate spatial patterns in sediment microplastic concentrations to sedimentary processes that determine zones of accretion and erosion. Using field-determined concentrations of microplastics, we applied laboratory microcosms studies, which manipulated sediment concentrations of microplastics, OM, and bivalves to determine the influence of sediment microplastics on ammonium cycling within intertidal sediments. Concentrations of microplastics determined within the intertidal sediment varied spatially and were similar to those found in other coastal regions of high urban use. Concentrations were independent of grain size and OM suggesting that physical processes other than those that govern natural sediment components determine the fate of microplastics within sediments. Under laboratory conditions, concentrations of ammonium were significantly greater in the overlying water of treatments with microplastics, clams, and OM compared with treatments without microplastics. These preliminary studies suggest that high concentrations of microplastics have the potential to alter key sedimentary processes such as ammonium flux. This could have serious implications, for example, contributing to eutrophication events in regions of the coast that are highly urbanized.

Occurrence and spatial distribution of microplastics in sediments from Norderney

The spatial distribution of small potential microplastics (SPM) (<1 mm) in beach sediments was studied on a 500 m stretch of the North Sea island of Norderney. Their correlation with visible plastic debris (VPD) (>1 mm) was also examined. Small microparticles were extracted from 36 one kg sediment samples and analysed by visual microscopic inspection and partly by thermal desorption pyrolysis gas chromatography/mass spectrometry. The smallest particle size that could be analysed with this method was estimated to be 100 μm. The mean number of SPM at the three sampling sites (n = 12) was 1.7, 1.3 and 2.3 particles per kg dry sediment, respectively. SPM were identified as polypropylene, polyethylene, polyethylene terephthalate, polyvinylchloride, polystyrene and polyamide. The organic plastic additives found were benzophenone, 1,2-benzenedicarboxylic acid, dimethyl phthalate, diethylhexyl phthalate, dibutyl phthalate, diethyl phthalate, phenol and 2,4-di-tert-butylphenol. Particles were distributed rather homogenously and the occurrence of SPM did not correlate with that of VPD.