Oxide Microparticles Research Articles

Investigation of coherent and incoherent scattering of 662 keV gamma photons from aluminum oxide (Al2O3) nanoparticles and microparticles

Investigation of coherent and incoherent scattering of 662 keV gamma photons from aluminum oxide (Al2O3) nanoparticles and microparticles

Diacerein-loaded surface modified iron oxide microparticles (SMIOMPs): an emerging magnetic system for management of osteoarthritis via intra-articular injection.

Osteoarthritis (OA) is regarded as one of the most prevealent irreversible joint degenerative disorder worldwide. Recently, considerable interest in utilizing intra-articular (IA) injections for managing OA has been raised. In this study, IA injectable surface modified iron oxide microparticles (SMIOMPs) loaded with Diacerein (DCN) were developed. The effects of formulation parameters on particle size, entrapment efficiency, and zeta potential were explored using factorial design. The optimized formulation was characterized regarding morphology and in vitro release. Differential scanning calorimetry (DSC) and Fourier-transform infrared spectroscopy (FTIR) were done to assess interactions. Further, sterilization and in vivo performance in rats with induced arthritis has been performed for the optimized formulation. The selected optimized system included 2M FeCL3 and 1% chitosan as a surface modifier achieved high drug entrapment of 85.25% with a PS of 1.54 µm and sustained DCN release. Morphological examination of the optimized formulation revealed spherical particles with chitosan coat. DSC and FTIR results indicated the absence of undesired interactions between DCN and the used components. No significant change in the measured parameters was observed following sterilization using gamma radiation. In vivo assessment revealed superior performance for the optimized formulation in reducing cartilage inflammation and degradation. Plasma levels of tumor necrosis factor α and Interleukin-1 beta, as well as knee diameter, were significantly reduced in the treated groups compared to the untreated ones. Overall, the results suggest that the proposed DCN-loaded SMIOMPs represent a promising advancement in the arena of cartilage regeneration.

Application of nano-TiO2 and micro-ZnO on cementitious surfaces for self-cleaning façades by spray coating and dip coating: A comparative study

Building façades are constantly exposed to atmospheric pollution and various external agents that can degrade their aesthetic qualities and introduce degradation patterns that affect the durability and performance of the materials. Façades with self-cleaning properties are important in the modern construction industry and the conservation of historic buildings, as they reduce costs and allow the preservation of original surfaces without the need for invasive interventions that could compromise cultural heritage. This study does a comparative analysis of the application of photocatalytic coatings composed of aqueous dispersions of titanium dioxide nanoparticles (TiO₂) and zinc oxide microparticles (ZnO) on cementitious substrates for use on façades by two functionalisation methods: spray coating and dip coating. A comprehensive characterisation was carried out using techniques such as scanning electron microscopy (SEM), X-ray diffraction (XRD), and diffuse reflectance spectroscopy (DRS) to assess the morphology, crystal structure and light absorption properties of the photocatalyst particles while Energy Dispersive Spectroscopy (EDS) and scanning electron microscopy (SEM) were employed to evaluate the substrate. The self-cleaning performance was evaluated by monitoring the degradation of Rhodamine B (RhB) dye under simulated sunlight. Spectrophotometric analysis was used to assess the colour coordinates using a standard colour system (CIELAB colour space). The results showed that the photocatalytic coatings improved the surfaces' self-cleaning properties while maintaining the substrate's original aesthetics. Spray-applied micro-ZnO-based coatings showed the most significant effectiveness in terms of self-cleaning.

Application of machine learning algorithms for predicting the life-long physiological effects of zinc oxide Micro/Nano particles on Carum copticum

Nanoparticles impose multidimensional effects on living cells that significantly vary among different studies. Machine learning (ML) methods are recommended to elucidate more consistence and predictable relations among the affected parameters. In this study, nine ML algorithms [Support-Vector Regression (SVR), Linear, Bagging, Stochastic Gradient Descent (SGD), Gaussian Process, Random Sample Consensus (RANSAC), Partial Least Squares (PLS), Kernel Ridge, and Random Forest] were applied to evaluate their efficiency in predicting the effects of zinc oxide nanoparticles (ZnO NPs: 0.5, 1, 5, 25, and 125 µM) and microparticles (ZnO MPs: 1, 5, 25, and 125 µM) on Carum copticum. The plant root/shoot biomass; number of leaves, branches, umbellates, and flowers; protein content; reducing sugars; phenolic compounds; chlorophylls (a, b, Total); carotenoids; anthocyanins; H2O2; proline; malondialdehyde (MDA); tissue zinc content; superoxide dismutase (SOD) activity; and media ΔpH were measured and considered input variables. All levels of ZnO MPs treatments increased growth parameters compared to the control (ZnSO4). The highest shoot/root fresh and dry mass were recorded at 5 µM ZnO MPs compared with the control. The root fresh/dry mass under ZnO NPs treatments was more sensitive than shoot parameters. The number of flowers increased by 134 and 79% in MPs and NPs treatments compared to the control, respectively. ZnO NPs reduced protein content by up to 81% in 125 µM NPs compared to ZnSO4. Reducing sugar content increased to 25, 40 and 36% in 5, 25, 125 µM MPs and 67, 68, 26, 26 and 21% in 0.5, 1, 5, 25 and 125 µM NPs treatments, respectively. The pH alteration was more significant under NPs and affected zinc uptake. All levels of ZnO NPs treatments increased growth parameters compared to the control. All ML algorithms showed varied efficiencies in predicting the nonlinear relationships among parameters, with higher efficiency in predicting the behavior of root and shoot dry mass, root fresh weight and number of flowers according to R2 index. The model obtained from SVR with the radial basis function (RBF) kernel was selected as a comprehensive model for predicting and determining the efficacy of the results.

Insulin-Loaded Graphene Oxide Microparticles: Synthesis, Characterization, Insulin Delivery, and Physical Interactions Analysis

Insulin-Loaded Graphene Oxide Microparticles: Synthesis, Characterization, Insulin Delivery, and Physical Interactions Analysis

Higher Sensitivity of Rat Testes to Nano Nickel than Micro Nickel Particles: A Toxicological Evaluation.

Present investigations were undertaken to record the vulnerability of testis to nickel oxide nano and microparticles in Wistar rat with special reference to their preferred bioaccumulation, consequent generation of reactive species, reciprocal influence on testosterone synthesis, DNA damage in spermatids and histopathological changes. Suitable numbers of rats were gavaged NiONPs or NiOMPs (5mg/kg b.w.each) for 15 and 30days. Testes en bloc were removed and processed for the estimation of selected parameters. Results showed that rat testes could accumulate nickel in an exposure time dependent manner. Generation of malondialdehyde, a denominator of ROS, increased significantly in the testes of NiONPs treated rats. Moreover, serum testosterone values also increased in NiONPs treated rats. Higher DNA damage in sperms was also recorded. Nano and microparticles of nickel, both could induce specific dose and time dependent lesions in the testis of rat. Histopathological results revealed degeneration of germinal epithelium and spermatocytes; hypertrophy of seminiferous tubules and necrosis. SEM results also indicated specific morphological changes in cellular components of tubules. This study suggests that testis is also vulnerable to the adverse effects of NiONPs alike liver and kidney. Both micro and nanoparticles of nickel elicited differential effects in a dose and exposure time dependent manner. However, NiONPs induced greater overall toxicity than NiOMPs. The results are expected to be helpful in determining the human reproductive health risks, associated with environmental/ occupational exposure to nanoparticles of nickel.

Investigating the impact of different routes of nano and micro nickel oxide administration on rat kidney architecture, apoptosis markers, oxidative stress, and histopathology.

Although the production and use of nickel oxide nanoparticles (NiONP) are widespread, environmental and public health problems are associated with it. The kidney is the primary organ in excretion and is among the target organs in nanoparticle toxicity. This study aimed to compare the renal toxicity of nickel oxide (NiO) microparticles and nickel oxide nanoparticles by different routes of administration, such as oral, intraperitoneal (IP), and intravenous (IV). Seven groups were formed, with 42 male rats and six animals in each group. NiO oral (150mg/kg), NiO IP (20mg/kg), NiO IV (1mg/kg), NiONP oral (150mg/kg), NiONP IP (20mg/kg), and NiONP IV (1mg/kg) was administered for 21days. After NiO and NiONP administration, a decrease in antioxidant activities and an increase in lipid peroxidation occurred in the kidney tissue of rats. Increased kidney urea, uric acid, and creatinine levels were observed. Inhibition of acetylcholinesterase activity and an increase in interleukin 1 beta were detected. Apoptotic markers, Bax, caspase-3, and p53 up-regulation and Bcl-2 down-regulation were observed. In addition, histopathological changes occurred in the kidney tissue. In general, it was observed that nickel oxide microparticles and nickel oxide nanoparticles cause inflammation by causing oxidative stress in the kidney tissue, and NiONP IV administration is more effective in renal toxicity.

Wireless Alerts and Data Monitoring from BNNO-MWCNTs/PDMS Composite Film-Based TENG Integrated Inhaler for Smart Healthcare Application.

In recent years, the implementation of energy-harvesting technology in medical equipment has attracted significant interest owing to its potential for self-powered and smart healthcare systems. Herein, the integration of a triboelectric nanogenerator (TENG) is proposed into an inhaler for energy-harvesting and smart inhalation monitoring. For this initially, barium sodium niobium oxide (Ba2NaNb5O15) microparticles (BNNO MPs) are synthesized via a facile solid-state synthesis process. The BNNO MPs with ferroelectricity and high dielectric constant are incorporated into polydimethylsiloxane (PDMS) polymer to make BNNO/PDMS composite films (CFs) for TENG fabrication. The fabricated TENG is operated in a contact-separation mode, and its electrical output performance is compared to establish the optimal BNNO MPs concentration. Furthermore, multi-wall carbon nanotubes (MWCNTs), a conductive filler material, are used to enhance the electrical conductivity of the CFs, thereby improving the electrical output performance of the TENG. The robustness/durability of the proposed BNNO-MWCNTs/PDMS CF-based TENG are investigated. The proposed TENG device is demonstrated to harvest electrical energy from mechanical motions via regular human activities and power portable electronics. The TENG is integrated into the inhaler casing to count the number of sprays remaining in the canister, send the notification to a smartphone via Bluetooth, and harvest energy.

Fluorescent Composite Nano‐ and Microparticles Based on Xanthene Dyes and Iron Oxides

AbstractModern industry actively uses metal structural materials to create innovative devices and components. In order to prevent emergency situations in production, nondestructive testing methods are used to detect defects on the surface of the material being developed. Among the methods of nondestructive testing, one can highlight the method of luminescent magnetic flaw detection, which allows identifying defects on the surface and under the surface of the test sample with minimal effort. It is known that in some cases, the magnetic‐powder method cannot achieve the required sensitivity due to the shape and location of defects themselves or due to certain conditions of object operation. To increase the visibility and sensitivity, magnetic nano‐ and microparticles can be conjugated with the dyes. Iron oxide nanoparticles (Fe3O4, γ‐Fe2O3) can be used as such magnetic particles, since they are quite easy to obtain and have low toxicity, high chemical stability, and a wide variety of magnetic properties. To ensure fluorescence of magnetic particles, a wide variety of fluorescent dyes associated with such particles are used. The dyes can include morin, naphthalimide derivatives, as well as semiconductor quantum dots. This article provides a review of fluorescent composite micro‐ and nanoparticles based on xanthene dyes (rhodamine, fluorescein, and pyronine). Such dyes are economically available luminophores, have good binding to the surface of magnetic particles, and therefore can be suitable for luminescent magnetic flaw detection. This review article discusses methods for producing composite nano‐ and microparticles of iron oxides with xanthene dyes and provides prospects of using composite nano‐ and microparticles in nondestructive testing methods.

Improving radiative cooling performance via strong solar reflection by dense Al2O3 particles in a polymeric film

Radiative cooling (RC) technology has attracted a lot of attention due to its spontaneity and sustainability for cold energy generation. One of the primary objectives of enhancing RC performance is to prevent the absorption of incoming radiation. In particular, absorbing solar irradiance on an RC surface is known as a hazardous obstruction of the radiative cooling effect of the surface. This paper proposes a polymer-based RC film with dense aluminum oxide (Al2O3) microparticles to achieve high solar reflection. We have developed a fabrication recipe for densely dispersing Al2O3 particles in the polydimethylsiloxane (PDMS) medium to utilize a scattering effect as much as possible. As a result, the fabricated film contains 36.2% of Al2O3 by volume, and the resulting solar reflection is more than 94%. Additionally, both theoretical and experimental investigations are done to determine the cooling power and temperature of the fabricated film. The calculated cooling power of the proposed RC film is about 90 W/m2 under a standardized weather condition. Especially, an outdoor experiment is demonstrated to measure the RC film's cooling temperature. Under cool weather conditions, the resulting temperature is measured to be approximately 3.5∘C, which is 6.3∘C cooler than a conventional white-colored surface.

Enhancing X-ray radiation protection with novel liquid silicone rubber composites: A promising alternative to lead aprons

This study introduces a lead-free alternative for enhanced radiation protection. While lead aprons effectively attenuate ionizing radiation, concerns regarding flexibility, weight, and environmental hazards persist. In response, the present research is focused on producing an innovative sheet shielding comprised of carefully selected dense metal oxide microparticles (DMOs-MPs) and liquid silicone rubber (LSR). To evaluate the efficacy of the LSR samples, the current study uses rigorous testing procedures, such as microstructure characterization using EDX and FESEM. Furthermore, the study investigated key attenuation parameters within the LSR samples. Radiation protection was greatly and effectively supplied using DMOs-MPs filler (Bi-1 to Bi-7) in LSR samples; this protection reached 99.9% in the X-ray energy range. Due to the unique characteristics of the Bi-7, the results demonstrated that the samples’ shielding efficiency improved with the addition of high atomic number and high-density fillers. It had the greatest attenuation coefficient and density. At 60 keV, Bi-7’s density was 2.980 gcm−3, and its LAC and MAC were 19.2621 cm−1 and 6.4638 cm2/g, respectively. It also had the lowest half-value layer values in the energy range of 60–120 keV. The LSR samples showed effective radiation absorption for different energy levels, indicating that LSR can enhance the flexibility and comfort of the apron while providing adequate radiation protection. The incorporation of the DMOs-MPs with LSR represents an effective contribution and a noteworthy stride to enhance the safety and well-being of medical professionals routinely exposed to ionizing radiation.

Excitation of optically trapped single particles using femtosecond pulses.

Excitation from optically trapped particles is examined through laser-induced breakdown spectroscopy following interactions with mJ-level fs pulses. Optical emissions from sub-ng ablation of precisely positioned cupric oxide microparticles are used as a method to spatially resolve laser-particle interactions resulting in excitation. External focusing lenses are often used to change the dynamics of nonlinear self-focusing of fs pulses to form laser filaments or, alternatively, to form very intense air plasmas. Given the significant implications external focusing has on laser propagation and plasma conditions, single-particle emissions are studied with focusing lenses ranging from 50 to 300 mm. It is shown that, while single particles are less excited at longer focal lengths due to limited energy transfer through laser-particle interactions, the cooler plasma results in a lower thermal background to reveal resolved single-shot emission peaks. By developing an understanding in the fundamental interaction that occurs between single particles and fs pulses and filaments, practical improvements can be made for atmospheric remote sensing of low-concentration aerosols.

UV Light-Mediated Hydrolytic Reaction to Develop Magnetic Hydrogel Actuators with Spatially Distributed Ferriferous Oxide Microparticles.

Magnetic hydrogel actuators are developed by incorporating magnetic fillers into the hydrogel matrix. Regulating the distribution of these fillers is key to the exhibited functionalities but is still challenging. Here a facile way to spatially synthesize ferrosoferric oxide(Fe3O4) microparticles in situ in a thermal-responsive hydrogel is reported. This method involves the photo-reduction of Fe3+ ions coordinated with carboxylate groups in polymer chains, and the hydrolytic reaction of the reduced Fe2+ ions with residual Fe3+ ions. By controlling the irradiation time and position, the concentration of Fe3O4 microparticles can be spatially controlled, and the resulting Fe3O4 pattern enables the hydrogel to exhibit complex locomotion driven by magnet, temperature, and NIR light. This method is convenient and extendable to other hydrogel systems to realize more complicated magneto-responsive functionalities.

Synthesis of Tin/Tin Oxide (Sn-SnO2) Microparticles Scattered on Natural Phosphate and Its Utilization in Capturing Amoxicillin Antibiotic in Real Water Samples

Microparticles of tin and tin oxide scattered on natural phosphate (Sn-SnO2)-NPh were thermally prepared and then used as a modifier of a graphite electrode for amoxicillin (AMX) detection using DPV. It was characterized by FTIR, SEM and XRD. The Sn formation was confirmed by the appearance of their corresponding peaks in the XRD pattern. In addition, the transformation of Sn into SnO2 and Ca(SnO4) and SnF4 as a function of temperature was observed. The charge transfers resistance (Rct) value of the (Sn-SnO2)-NPh-CPE is 71.07 Ω, indicating a higher electron transfer capacity compared to NPh-CPE (92.32 Ω) and CPE (108.5 Ω). Also, it has an area surface high. This result indicates, the synergetic interaction between these materials structures increased the electrochemical activity. The AMX oxidation at the (Sn-SnO2)-NPh-CPE is controlled by a diffusion process with the transfer of two electrons. The quantification provided a good linear relationship in the range of AMX concentration from 7.0 × 10−7 to 1.0 × 10−5 mol l−1 with a correlation coefficient of 0.982. The detection limit was calculated as 1.89 × 10−7 mol l−1. Satisfactory results were obtained from the detection of the AMX in different samples using the prepared electrode.

Stretch Sensor: Development of Biodegradable Film.

This article presents research on biodegradable stretch sensors produced using biological material. This sensor uses a piezoresistive effect to indicate stretch, which can be used for force measurement. In this work, an attempt was made to develop the composition of a sensitive material and to design a sensor. The biodegradable base was made from a κ-carrageenan compound mixed with Fe2O3 microparticles and glycerol. The influence of the weight fraction and iron oxide microparticles on the tensile strength and Young's modulus was experimentally investigated. Tensile test specimens consisted of 10-25% iron oxide microparticles of various sizes. The results showed that increasing the mass fraction of the reinforcement improved the Young's modulus compared to the pure sample and decreased the elongation percentage. The GF of the developed films varies from 0.67 to 10.47 depending on composition. In this paper, it was shown that the incorporation of appropriate amounts of Fe2O3 microparticles into κ-carrageenan can achieve dramatic improvements in mechanical properties, resulting in elongation of up to 10%. The developed sensors were experimentally tested, and their sensitivity, stability, and range were determined. Finally, conclusions were drawn on the results obtained.

Obtaining nanoparticles of Cu2O by means of a pulsed discharge of CH3CH2OH-N2

CH3CH2OH-N2 plasma mixture was used to synthesize cuprous oxide (Cu2O) micro-particles in a pulsed DC sputtering system, using a ethanol pressure of 1.5 Torr and a current of 400 mA at a frequency of 30 kHz. The plasma mixture was used successfully to obtain the micro-particles of Cu2O using a copper (Cu) target and a stainless steel substrate. The Cu2O products are characterized by the scanning electron microscope (SEM), the results show that the morphology of the Cu2O microparticles have a spherical shape which are randomly distributed on the stainless steel substrate. Raman results show that from the CH3CH2OH-N2 plasma mixture it is possible to obtain one of the Cu oxidation phases which corresponds to Cu2O due to the fact that within the sample analyzed by means of Raman it is possible to observe only the peaks that correspond to the Cu2O phase. The analysis by energy dispersive spectroscopy (EDS) serves to determine the stoichiometric balance present in the substrate, from which the presence of the characteristic peaks of stainless steel was confirmed, along with the characteristic peaks of Cu and O which exhibit an atomic ratio of 2:1 respectively. Atomic force microscopy (AFM) was used to again determine the morphology of the microparticles, finding a spherical morphology. In addition, the value of roughness and grain size was determined, finding values of 20 nm and 45 nm respectively. The images 3-D show the presence of peaks and valleys within the substrate and an non-homogeneous distribution of spherical micro-particles on the surface of the stainless steel.

Surface cleanliness of hydrothermally grown zinc oxide microparticles compared to commercial nanoparticles

Zinc oxide (ZnO) nanoparticles are attractive candidates for application as antibacterial agents due to their effectiveness against antibiotic-resistant strains of both gram-positive and gram-negative bacteria. Despite this potential, applications are limited by fundamental gaps in current understanding of their underlying antibacterial pathways. ZnO microparticles are less often used in antibacterial research compared to ZnO nanoparticles due to the potential of nanoparticles for internalization into bacterial cells. Microparticles are nevertheless of interest as a research platform as their increased scale allows both the nonpolar and polar faces of the ZnO crystals to be distinguished. This in turn provides a useful platform to study surface interactions with bacteria, allowing for more targeted investigation of antibacterial mechanisms. Previous preliminary studies have indicated that hydrothermally grown ZnO microparticles exhibit comparable antibacterial activity to commercial ZnO nanoparticles further adding to their utility. The purpose of this research was to examine the surface cleanliness of ZnO microparticles in comparison to nanoparticles utilizing both scanning electron microscopy (SEM) as well as Fourier transform infrared spectroscopy (FTIR). The results of our experiments supported our hypothesis that there were no significant differences in the surface contamination of ZnO microparticles compared to nanoparticles. This supports the usage of ZnO microparticles as a viable platform for studying antibacterial mechanisms observed at the nanoscale knowing that in the absence of internalization effects the mechanism of antibacterial action across scales is intrinsic to ZnO and not a result of differing surface cleanliness.

Green synthesis of zinc oxide microparticles using the leaf extract of Dolichandrone spathacea in sustainable agriculture: a new approach for protecting the legume plant (Vigna radiata) against the Cr(VI) stress

Green synthesis of zinc oxide microparticles using the leaf extract of Dolichandrone spathacea in sustainable agriculture: a new approach for protecting the legume plant (Vigna radiata) against the Cr(VI) stress

Retracted: Study of Mechanical Properties on Ferric Oxide Microparticles Reinforced with Polyethylene

Retracted: Study of Mechanical Properties on Ferric Oxide Microparticles Reinforced with Polyethylene

Comparative study of nickel oxide and nickel oxide nanoparticles on oxidative damage, apoptosis and histopathological alterations in rat lung tissues

BackgroundNickel oxide nanoparticles (NiONPs) are used as industrial photoelectric and recording materials, catalysts, and sensors. It has been increasingly used in many industrial sectors. Lungs are the important biological barrier that comes into contact with nanomaterials in the inhaled air. This study aimed to compare the effects of nickel oxide (NiO) microparticles and NiONPs on rat lung tissues in different dose administrations, such as oral, intraperitoneal, and intravenous. MethodsThe mature male Wistar rats (n = 42) were divided into seven groups with six animals: Group I (control), Group II NiO gavage (150 mg/kg), Group III NiO intraperitoneally (20 mg/kg), Group IV NiO intravenously (1 mg/kg), Group V NiONP gavage (150 mg/kg), Group VI NiONP intraperitoneal (20 mg/kg), and Group VII NiONP intravenous (1 mg/kg) for 21 days. Oxidative stress (MDA, CAT, SOD, GPx, and GST), apoptotic marker (p53) gene expression, and histopathological changes were determined comparatively. ResultsOur data showed that NiO and NiONPs caused an exposure-related increase in the incidence of alveolar/bronchiolar pathological changes, oxidative damage, and p53 gene expression in male rats. Intravenous exposure to NiONPs produces statistically (p < 0.05) more oxidative damage and histopathological changes than exposure to NİO. It also induces higher upregulation of the pro-apoptotic p53 gene. ConclusionNiO and NiONPs induce oxidative damage, histopathological alterations and p53 gene expression in rat lungs. Thus, exposure to NiO and NiONPs, especially intravenously, may indicate more toxicity and carcinogenicity.