Microclimate Parameters Research Articles

TinyML-powered ensemble modeling for greenhouse climate control using XGBoost and LightGBM

The cultivation of crops in smart greenhouses is experiencing a profound transformation, fueled by cutting-edge technological advancements in environmental control that significantly improve efficiency, sustainability, and productivity. Nonetheless, the intricate and ever-changing dynamics of microclimate conditions pose challenges in customizing environments to satisfy the specific requirements of various plants. Accurate prediction of these microclimate parameters emerges as a promising solution to this challenge. This study explores the integration of machine learning and TinyML platforms to create a groundbreaking ensemble approach for effectively forecasting microclimate conditions. We obtained exceptional prediction accuracy for temperature (R2 = 0.9972) and humidity (R2 = 0.9976) using a stacking ensemble of XGBoost and LightGBM models. We used Optuna for accurate hyperparameter optimization and thoroughly examined the best possible input variable combinations as part of our meticulous model construction approach. The results of this study demonstrate the revolutionary potential of machine learning in greenhouse climate management, opening the door for data-driven, intelligent agricultural systems that maximize crop yields while reducing energy consumption.

Predicting the distribution of Ixodes ricinus in Europe: integrating microclimatic factors into ecological niche models.

Ixodes ricinus, commonly known as the castor bean tick and sheep tick, is a significant vector of various diseases, such as tick-borne encephalitis and Lyme borreliosis. Owing to climate change, the distribution and activity of I. ricinus are expected to increase, leading to an increase in the number of diseases transmitted by this species. Most distribution models and ecological niche models utilize macroclimate datasets such as WorldClim or CHELSA to map the distribution of disease-transmitting ticks. However, microclimatic factors are crucial for the activity and survival of small arthropods. In this study, an ecological niche modelling approach was used to assess the climatic suitability of I. ricinus using both microclimatic and macroclimatic parameters. A Mixed model was built by combining parameters from the Soiltemp (microclimate) and Wordclim (macroclimate) databases, whereas a Macroclimate model was built with the CHELSA dataset. Additionally, future suitabilities were projected via the macroclimate model under the SSP3-7.0 and SSP5-8.5 scenarios. Macroclimate and Mixed models showed similar distributions, confirming the current distribution of I. ricinus. The most important climatic factors were seasonality, annual temperature range, humidity and precipitation. Future projections suggest significant expansion in northern and eastern Europe, with notable declines in southern Europe.

Features of Providing Air Temperature and Humidity Parameters in the Engine Room Working Area at Sewage Pumping Stations

Statement of the problem. There is an important task for engineers to improve the working conditions of workers in industrial facilities. The waste water system includes a large number of structures with different temperature and humidity microclimate characteristics. The possibility has been discussed to improve these characteristics by redistributing air flows in the engine room of a city sewage pumping station with PLI panel. Results. There are the results of the temperature and humidity microclimate parameters research in the working area of the engine room at a high-voltage sewage pumping station which is located in Moscow. The author has proved the possibility of use the cooled air from the machine room lower level in a high-voltage pumping station at the machine room main working area. It has been described the calculation features of the heat transfer coefficients in the proposed model for local ventilation at the main technological working area. It has been described the results of temperature and humidity parameters instrumental study in the main working area and the lower level. Conclusion. Thelocal ventilation systems could be used for the working area, where an employee performs repair work of the main technical equipment in a sewage pumping station. The balanced mathematical thermal model includes PLI panel’s potential location.

Cfd-based optimization of Direct evaporative cooling systems for canarian greenhouses in Semi-Arid regions

Direct Evaporative Cooling Systems (DECS) offer a promising solution for mitigating heat stress in greenhouses located in arid and semi-arid regins. To implement DECS efficiently in these regions, it is crucial to understand their impact on greenhouse microclimate parameters. This study investigates the influence of DECS on the microclimate within a canarian greenhouse and identifies key factors affecting their efficiency. Through Computational Fluid Dynamics (CFD) simulations using Ansys, we examined the effects of DECS on temperature, relative humidity, and air velocity within the greenhouse under semi-arid conditions.The results indicate that DECS efficiency is affected by several factors, including fan placement, evaporative pad height, fan spacing, and inlet air fan speed. Higher fan placement cools the upper canopy but increases humidity near the ceiling, whereas lower placement improves temperature uniformity but may require additional humidification. Closer fan spacing results in uneven air velocity, while wider spacing leads to stagnant zones within the greenhouse. Optimal placement of the the evaporative pad is crucial for maximizing the cooling coverage area and minimizes the temperature gradients. Inlet air fan speed also significantly impacts the microclimate, with higher speeds reducing both temperature and humidity. By optimizing these parameters, the DECS system was able to significantly decrease air temperature, increase humidity, and improve air velocity inside the greenhouse. With a pad height of 1.5 m, fans positioned at a height of 2 m, a distance of 6 m between each fan, and an air speed of 1.5 m/s at the entrance – the DECS enhances the local climate. Under these conditions, the mean air temperature drops from 40°C −in greenhouse with natural ventilation- to 21 °C using DECS, while relative humidity increases from 23 % −in greenhouse with natural ventilation- to 67 % using DECS, creating a more favorable environment for plant growth and potentially increasing crop yield and quality. Additionally, energy and environmental analyses show that implementing DECS in Canarian greenhouses, instead of traditional electrical cooling systems, results in substantial energy savings of 123,818.112 kWh/year annually and reduces carbon dioxide emissions by approximately 1.785 tons/year over a 20-year operational lifespan in a semi-arid climate.

Spatial Variation of Microclimatic Parameters Inside a Polyhouse with Fog Cooling System

The importance of protected cultivation is increasing day by day due to its capability of producing crop all round the year and increase in the crop productivity. This advantage of protected cultivation can be efficiently achieved by adapting the polyhouse cultivation. To obtain the maximum crop productivity inside a polyhouse, it is necessary to understand the variability of microclimate inside it. The present study aims to understand the spatial variability of microclimate inside a naturally ventilated polyhouse installed with fog cooling system during summer season. The main aim of the study is to understand the effect of fogging system in spatial variability of microclimate. For the study, the data of microclimatic parameters were collected daily from April to June at four different time intervals 8.30 AM, 12.30 PM, 4.30 PM and 8.30 PM. The data recorded was then analyzed in Golden Surfer Software to generate contour plots of weekly averages of microclimate parameters. The analysis revealed that the temperature and relative humidity varied across the polyhouse depending upon the wind velocity and its distribution pattern. The light intensity varied based upon the orientation of polyhouse and the position of sun. Carbon dioxide concentration varied based on temperature, light intensity, crop transpiration and respiration. It can be concluded that, inside a naturally ventilated polyhouse, the microclimate varied both spatially and temporally with fogging system also due to wind effect. Thus, having accurate understanding of the microclimate inside a polyhouse helps to maintain optimal conditions for plant growth and thus improve crop yield and productivity.

Microclimate and the spatio-temporal dynamics of natural production of two ectomycorrhizal fungi from the Guineo-Sudanian ecozone in Benin

The study aims to determine the relation between the micro-climate and the natural production of Amanita subviscosa, and Lactifluus gymnocarpoides, in the Guinea-Sudanian ecozone. Nine permanent plots of 50 ×50 m were installed in three different vegetations of the “Ouémé Supérieur” forest reserve in central Benin. The mycological surveys were carried out during three (3) mycological seasons, each from June to October at a frequency of two visits per week and per plot. The number of fruiting bodies and the fresh biomass were recorded. Microclimatic parameters (soil water content, air temperature, soil temperature, relative humidity and precipitation) were measured using a rain gauge and a HOBO micro station data logger installed at the middle of each plot. We tested several Generalized Linear Mixed Effects Models (GLMM) using the lme4 package to obtain the effect of recorded microclimate factor on the number of fruit bodies of each species and the Linear Mixed Effects Model (LMM) using the package nlme for fresh biomass. The study showed that soil water content is the main driver of fungal fruiting phenology and increased biomass production. The fruiting of A. subviscosa is positively affected by air temperature and soil water content (p = 0.0004) but negatively affected by relative air humidity. The fructification of L. gymnocarpoides is only positively affected by the air temperature and negatively affected by relative air humidity and soil water content. Soil water content significantly affects the fresh biomass of A. subviscosa (p≈0) while the fresh biomass of L. gymnocarpoides is significantly affected by soil water content and relative air humidity (p≈0). All species for their natural production have specific response at microclimate parameters variation.

Ensuring the normalization of the aero-ionic regime in production areas by means of ultrasonic air ionization

The results of studies on the normalization of the aeroionic regime in rooms under ultrasonic ionization of humidified air are presented. The increase in the concentration of negative aeroions under these conditions by the combined effect of the balloelectric effect and ultrasonic cavitation is substantiated. It has been established that when distilled water is used as a source of air ions under the action of a 10 W ultrasonic generator at a distance of 0.5 m, the concentration of negative air ions increases almost sixfold. At the same time, due to the joint effect of ultrasonic cavitation in the surface layer of water and the balloelectric effect, no generation of ozone and nitrogen oxides is caused. It is proved that with a decrease in the degree of water mineralization, the concentrations of negative and positive aeroions increase due to changes in the physicochemical properties of water and the resulting mechanochemical phenomena. The mechanism of formation of air ions in the air of industrial premises under the combined action of the balloelectric effect and ultrasound is proposed. It is substantiated that the quality of the air ionic composition of industrial premises air improves at a temperature of demineralized water of 20-25 °C and a directed air flow of 6 m/s towards the working area with the combined effect of ultrasound and balloelectric effect, which contributes to the improvement of sanitary and hygienic working conditions. The structure of an automated system for controlling the aeroionic regime of the working area of industrial premises with artificial ionization of humidified air using an aeroion generator and a ventilation system is proposed. This will allow monitoring and processing of information on technological, electrical and microclimatic parameters, adjusting, coordinating and jointly controlling the ventilation system devices and the ultrasonic generator of air ions.

Impact of the Location and Energy Carriers Used on Greenhouse Gas Emissions from a Building

The growth in population increases greenhouse gas (GHG) emissions into the environment. High GHG emissions are attributed to meat production, due to its high energy demand. The largest carbon footprint in the production of poultry meat is generated by combustion. This paper deals with the problem of greenhouse gas emissions (total dust, CO, CO2, NOx, SOx and benzo(a)pyrene) resulting from the generation of energy for heating broiler houses located in different locations in Europe. The study includes continuous measurements of selected microclimate parameters: temperature and relative humidity inside and outside the building, floor temperature, wind speed and direction, and solar radiation intensity. Validation and calibration of the model, emission calculations, and analysis of the obtained results were conducted. Eighteen design variants were assumed, differentiated by the heating fuel used (hard coal, fuel oil, gaseous fuels), material and construction solutions for the floor and the location of the facility. The analysis showed that CO2 emissions for a facility located in northern Europe are 123,153 kg higher compared to the same building located in southern Europe. In addition, increasing the floor’s thermal resistance by 3.69 m2·K·W−1 reduced harmful gas emissions by an average of 5.7% for each of the locations analysed.

Dwarf shrubs may mitigate the negative effects of climate change on spiders by moderating microclimate

Climate change negatively affects arthropod biodiversity worldwide. Mitigating the resulting arthropod decline is a great challenge. Dwarf shrubs in open areas might buffer microclimatic extremities by reducing the solar radiation reaching the ground and weakening air circulation near the soil surface. Forest steppes are mosaics of forests and grasslands covering a vast area in Eurasia. This heterogeneous ecosystem offers the opportunity to study the effect of small habitat features, i.e. dwarf shrubs, in dry grasslands and compare the fauna of rosemary-leaved willow (Salix rosmarinifolia) shrubs with forest patch interiors, open grasslands and their edges. We hypothesized that the dwarf shrub microhabitat has a wetter and cooler microclimate than open grassland and a different spider community composition than other forest-steppe microhabitats. We recorded microclimatic parameters with data loggers, measured soil moisture with TDR and collected ground-dwelling spiders with pitfall traps. We detected the highest soil moisture (6.26 ± 1.21%, mean ± 95% confidence interval) and air humidity (80.19 ± 3.19%) in forests and the lowest in grasslands (4.36 ± 0.65%; 66.59 ± 2.53%, respectively). The warmest microhabitats were grasslands (23.23 ± 0.51°C), whereas the coolest microhabitats were forests (18.92 ± 0.41°C). The distinct microclimate of dwarf shrubs was cooler (21.46 ± 0.41°C) and moister (5.43 ± 0.53%) than the surrounding semi-desert like grassland. Furthermore, we found a different spider community composition and trait state composition of spiders in forests, edges, grasslands and dwarf shrub microhabitats. Forests (9.90 ± 0.95) and edges (11.44 ± 1.27) hosted a higher species richness than grasslands (7.08 ± 4.27) and dwarf shrubs (5.09 ± 1.33). We collected larger spiders on the edges than in dwarf shrub microhabitats. The dwarf shrubs hosted a different microclimate and spider community composition from the grassland. Climate change in the forest-steppe region is assumed to be driven by a combination of warming and drying. In the coming decades, drought frequency and severity are predicted to increase. Woody vegetation, even dwarf shrubs, creates a thermal and moisture heterogeneity that might aid arthropods in buffering macroclimatic warming through behavioural thermoregulation. Therefore, their presence on grasslands can benefit the conservation of specialised grassland arthropods.

Exploring patterns of surface urban heat island intensity: a comparative analysis of three Greek urban areas

One of the most pressing issues of our time is the destabilization of the global climate as a result of rapid urbanization. In Europe, according to United Nations reports, almost 73% of the population lives in cities and this percentage is expected to rise to 85% by 2050 (United Nations and Department of Economic and Social Affairs, ‘World Urbanization Prospects 2018 Highlights’, 2018). This observed urban development and its trends pose significant challenges to our urban environments, therefore it is critical to improve our understanding and assess its impact by measuring and analyzing its patterns. This study presents a comprehensive five-year analysis of microclimatic parameters that can contribute to this analysis, such as land surface temperature (LST) and surface urban heat island (SUHI) intensity, using remotely sensed data over three cities in Greece. Specifically, the selected cities are the city of Thessaloniki, which is the second largest city situated in the northern part of Greece, the city of Larissa on the mainland, and finally the city of Tripoli in the Peloponnese peninsula in southern Greece. Each city represents urban areas with different physical and urban characteristics. For this purpose, the vegetation index-based technique for LST extraction was applied within the Google Earth Engine (GEE) platform. Normalized Difference Vegetation Index (NDVI) and Normalized Difference Water Index (NDWI) calculations were also performed over a five-year period. The results highlighted the spatio-temporal variations and trends that occur in the studied urban areas, providing valuable insights into the annual patterns of the SUHI phenomenon in different geographical contexts within Greece. This is particularly relevant in countries like Greece, where the density of World Meteorological Organization (WMO) stations providing reliable temperature data is low, usually limited to one per city. Consequently, LST derived from satellite data can provide more accurate intra-urban results of the SUHI effect, demonstrating the value of remotely sensed data as a cost effective and supportive tool for decision-making in environmental and urban planning policies.

Determination of outdoor thermal comfort thresholds for hot and semi-arid climates: A field study of residential neighbourhoods in Jaipur city

Outdoor thermal comfort (OTC) plays a vital role in enhancing the livability and well-being of urban residents, making it an essential area of research, particularly in the context of climate change. However, few studies have specifically focused on hot and semi-arid regions, especially within residential environments. This study seeks to address this gap by assessing OTC in various residential areas classified as Local Climate Zones (LCZs), ensuring a diverse range of survey locations to evaluate people's comfort and stress levels. Using the Thermal Sensation Vote (TSV) index, the study calibrated the Physiologically Equivalent Temperature (PET) scale for hot and semi-arid climates. In Jaipur, micrometeorological data was monitored alongside thermal perceptions, resulting in 2,428 valid responses gathered during both summer and winter seasons, between 09:00 and 21:00 h, when outdoor activity is common. The analysis revealed that microclimate parameters significantly influence thermal sensations in outdoor environments. Respondents showed high tolerance levels during summer, with variations in thermoneutrality, acceptability, preferences, and comfort across different built typologies. The threshold values identified in this study offer valuable insights for urban planners and designers, enabling them to enhance outdoor thermal comfort during the planning stages, ultimately creating more comfortable and livable urban spaces for residents.

Ecophysiology of Mediterranean Chestnut (Castanea sativa Mill.) Forests: Effects of Pruning Studied through an Advanced IoT System

Chestnut (Castanea sativa Mill.) forests in the Mediterranean region are facing increasing abandonment due to a combination of factors, ranging from climate change to socioeconomic issues. The recovery of chestnut ecosystems and their preservation and valorization are key to ensuring the supply of the wide spectrum of ecosystem services they provide and to preventing detrimental environmental shifts. The study’s objective was to provide evidence on the effects of different management options on the ecophysiology of chestnut forests, with diverse pruning intensities (low, medium, and high intensity versus no pruning) tested in an abandoned chestnut stand in central Italy with the aim of recovering and rehabilitating it for fruit production. Innovative Internet of Things (IoT) ‘Tree Talker’ devices were installed on single trees to continuously monitor and measure ecophysiological (i.e., water transport, net primary productivity, foliage development) and microclimatic parameters. Results show a reduction in water use in trees subjected to medium- and high-intensity pruning treatments, along with a decrease in the carbon sequestration function. However, interestingly, the results highlight that trees regain their usual sap flow and carbon sink activity at the end of the first post-pruning growing season and fully realign during the following year, as also confirmed by the NDVI values. As such, this paper demonstrates the efficacy of recovering and managing abandoned chestnut forests, and the initial setback in carbon sequestration resulting from pruning is rapidly remedied with the advantage of reviving trees for fruit production. Additionally, the reduced water demand induced by pruning could represent a promising adaptation strategy to climate change, bolstering the resilience of chestnut trees to prolonged and intensified drought periods, which are projected to increase under future climate scenarios, particularly in the Mediterranean region.

Passive Cooling of Natural Ventilated Polyhouse During Summer using IR Reflective Film

The high temperature (soil and air) and light intensity are major challenge in utilizing the natural ventilated polyhouse (PH) during summer season. There is urgent need to develop passive cooling system to address the challenge so that natural ventilated PH can be utilized for round the year cultivation. The IR reflective film have novel property in addressing the challenge, so it is utilized to develop natural ventilated PH to passively cool it during summer season. The efficacy of IR reflective film in cooling the natural ventilated PH is compared with open field and clear film by measuring the microclimate parameters and crop growth parameters. The increase in maximum temperature under clear film PH and IR reflective film PH are 6.2°C and 1.5°C respectively in comparison to open field. The IR reflective film is more suitable than clear film in reducing the temperature during summer season. The increase in yield under IR reflective film PH is 7.6% more than clear film PH due to suitable microclimate conditions under IR reflective film PH.

On-site measurement and mediation analysis of physiological parameters and thermal comfort under different outdoor microclimates in a cold region

This study examined the physiological responses and thermal comfort of ten subjects (five females and five males) across five outdoor locations on the campus of Hebei University of Technology during winter. Physiological parameters, including heart rate, LF/HF values from ECG, and α, β, θ values from EEG, were assessed. It revealed significant differences in microclimatic parameters and physiological responses among measurement points. Mean heart rate variations reached up to 5.72 (6.72 %) and mean β values differed by up to 0.05 (26.32 %), 0.08 (47.06 %), and 0.10 (43.48 %) during T1, T2, and T3 periods. HR, α, and θ values positively correlated with TCV, with coefficients of 0.131 (p < 0.01), 0.081 (p < 0.01), and 0.018, while LF/HF and β showed negative correlations, with coefficients of −0.109 (p < 0.01) and − 0.024 (p < 0.01). Changes in TCV from 0 to −2 corresponded to HR, LF/HF, α, β, and θ variations of 6.69 %, −3.5 %, 12.5 %, −9.38 %, and 7.14 %, respectively. Regarding microclimatic parameters' impact on thermal comfort, β in EEG signals showed greater mediating effects than other physiological parameters. This study is useful for providing guidelines for outdoor activities in winter and developing more accurate physiological parameter monitoring and comfort assessment methods.

Altering Micro-climatic Conditions with Green Landscaping Elements in Office Buildings

Experiments were conducted to determine whether vegetation can favourably affect micro-climatic conditions. The experimentation area contained a significant amount of computer and printer equipment, which generated higher temperatures and increased levels of Volatile Organic Compounds (VOCs), creating health hazards for workers. The high summer temperature of 45°C significantly reduced work efficiency. The experiments strategically positioned vegetation to assess whether micro-climatic parameters could be brought closer to a comfortable range. It was found that micro-climatic conditions can be monitored and regulated by placing plants at crucial positions. Keywords: Micro-climate, volatile organic compounds, vegetation, comfort zone

From BIM to thermal comfort: Leveraging BIM for rapid outdoor comfort assessments

This study introduces a novel system within a Building Information Modeling (BIM) environment to rapidly evaluate Outdoor Thermal Comfort (OTC). Traditionally, direct microclimate analysis in the design phase is hindered by cumbersome and resource-intensive processes. By utilizing information from BIM and integrating the COMFA thermal energy budget model, this approach facilitates immediate OTC evaluation. The system automates the Sky View Factor simulation using 3D modeling techniques and utilizes BIM model data to assess the thermal environment. Tested on a university campus, it effectively processes geospatial BIM data to compute microclimate parameters and estimate OTC using COMFA. This research represents a significant advancement in BIM-integrated OTC analysis, streamlining the design feedback process and aiding practitioners in improving outdoor thermal environments amidst climate change challenges.

Эффективность применения кормовой добавки на курах-несушках

Purpose. Efficiency assessment of the use of feed additive with including in the diet of poultry. Materials and Methods. The conditions of keeping poultry corresponded to the sanitary and hygienic standards adopted in the farm on the basis of which the experiment was conducted, and the requirements of industrial cultivation technology. For the poultry, the planting density, microclimate parameters and lighting mode corresponded to the requirements of the cross. Feeding and watering were carried out in accordance with the rations and norms adopted in the farms. Compound feeds intended for poultry of the experimental groups were prepared separately, in accordance with the draft instructions for the feed additive Acidopul L. Results. When weighed on day 60, the average egg weight of the experimental group 1 exceeded the control analogues by 0.38 g or 0.6%, of the experimental group 2 – by 0.50 g or 0.8%. In terms of egg productivity, laying hens of the experimental group 1 exceeded control analogues by 0.38 eggs/head or 2.9%, of the experimental group 2 – by 0.70 eggs/head or 5.4%. According to the results of a biochemical study of the blood serum of laying hens, the control and experimental groups differed in total protein content: in the experimental group 1, the excess was by 4.15 g / l, or 11.5%, in the experimental group 2 – by 2.50 g / l or 6.0%. Over the entire observation period, the safety of livestock in experimental group 1 was 2.7% higher, in experimental group 2 – 3.6%. According to the intensity of pecking, the poultry of the experimental group 1 was inferior to the control analogues by 0.9%, the experimental group 2 – by 1.8%. Conclusion. The results of the conducted studies indicate that the feed additive Acidopul L in the recommended dosage regimen of 1 liter per ton of compound feed (experimental group 1), 2 liters per ton of compound feed (experimental group 2) is able to have a beneficial effect on poultry products in the form of improved livestock safety.

Морфофункциональное состояние органов иммунной системы у поросят-гипотрофиков в ранний неонатальный период

Abstract. The purpose of the study was to study the state of the immune system organs in hypotrophic piglets in the early neonatal period in an industrial pig breeding complex. Methods. The experiment was conducted in 2023 in a large industrial pig farm in the Voronezh region on piglets of the wounded neonatal period received from sows 3-4 farrowing. The sows were kept at optimal microclimate parameters, taking into account their physiological state, and fed with SK-1 nutritionally balanced feed. At the initial stage of the experiment, the piglets obtained during farrowing underwent clinical examination and weighing. Animals under 800 g are counted as hypotrophic piglets (n = 30), animals over 800 g are normotrophic, respectively (n =30). After the groups were formed, animals were forced to be slaughtered before taking colostrum (n =5) and biological material was taken from each group (thymus, lymph nodes (inguinal), spleen for immunohistochemical studies. Results. The level of mitotic activity in the thymus of normotrophic piglets was 9.4 % higher (p &lt; 0.05) than in piglets with body weight deficiency. In the spleen, the level of mitotic activity had no significant differences and was approximately the same in all animals participating in the experiment. In lymph nodes, the mitotic activity of cells in normotrophics was 12.7 % higher (p &lt; 0.05). A study of positively expressed CD-3 cells in the spleen revealed significant differences, so, in normotrophic piglets, the number of cells positively stained with this marker was significantly higher than in piglets with a body weight deficiency by 10.2 % (p &lt; 0.05). The number of CD-3 cells in the thymus differed by 5.6 %, and in the lymph nodes by 2.4 % between the groups, but there were no significant differences. The cellular expression of “immature” forms of B lymphocytes (PAX-5) in the lymph nodes of normotrophics was significantly higher by 12.9 % (p &lt; 0.05) compared with hypotrophic piglets. The scientific novelty lies in the fact that for the first time a comprehensive immunohistochemical study of the organs of the immune system of piglets in the early neonatal period was carried out using monoclanal antibodies CD-3, Ki-67 and PAX-5. As a result of the experiment, it was revealed that piglets with body weight deficiency have a “depression” of the immune system, which manifests itself in hypoplasia of T-lymphocytes in the spleen, “maturing” B-lymphocytes in the lymph nodes and low mitotic potential in the thymus and lymph nodes.

Wpływ mikroklimatu gorącego na funkcje psychomotoryczne pracowników

The effect of hot microclimate on psychomotor functions of employees For several years now, one of the most important harmful factors related to the work environment has been a hot microclimate. Additionally, due to climate changes, including an increase in the average air temperature, especially in summer, attention should be paid to people working in open spaces. Microclimate parameters affect not only on physiological responses of the human body, but also psychomotor efficiency, which translates into the number of errors made during work, and thus the safety of oneself and one's colleagues. The aim of the article is to indicate the impact of a hot microclimate (and so a high air temperature) on the psychomotor functions of workers. Expanding knowledge in this area may contribute to improving safety at work in hot microclimates. Keywords: air temperature, hot environment, hot microclimate, thermal load, psychomotor performance, cognitive function

Air Monitoring in Operating Rooms: Results from a Comprehensive Study in the Campania Region

Ensuring air quality in operating rooms is crucial for the health and safety of healthcare professionals and patients. This study, focused on 141 operating theatres in the Campania Region from 2015 to 2022, highlights the importance of air monitoring in operating rooms. Microclimatic parameters, air exchanges, thermal comfort indices, air pressure differences, and anesthetic gas concentrations were measured using standardized procedures. Results indicate that 19% of microclimatic checks exceeded acceptable limits, with significant non-compliance in air velocity (0.01–0.04 m/s, mean 0.03 m/s) and air changes (1–14 h−1, mean 6 h−1). Additionally, levels of anesthetic gases such as nitrous oxide (54.7–197.31 ppm, mean 142.92 ppm) and sevoflurane (2.05–19.45 ppm, mean 5.90 ppm) frequently exceeded recommended exposure limits, raising health concerns. These findings underscore the importance of rigorously adhering to environmental standards and continuously monitoring for optimal conditions in operating rooms. The study also stresses the necessity of ongoing education and training for healthcare personnel on preventive measures to reduce risks. In conclusion, maintaining optimal environmental conditions not only safeguards the comfort and safety of healthcare professionals and patients, but also improves team productivity and clinical outcomes. The study advocates for regularly updating national guidelines and rigorously enforcing safety protocols in healthcare facilities.