Micro-hydro Power Plant Research Articles

Modeling and Comparison of Design Features of Pendulum and Radial Micro-Hydropower Plants Considering the Influence of Variable Design Parameters

This article provides a comparative analysis of pendulum and radial micro-hydropower plants. The novelty of this study lies in the comparative analysis of units that are fundamentally different in design to achieve the most rational option for low-speed rivers. It has been established that a pendulum micro-hydropower plant has a high torque with relatively small dimensions but operates cyclically. At a diameter of 1 m and a blade area of 0.3 m2, the peak torque was 140 N·m. At the same time, the design is sensitive to the blade area and at 0.6 m2 and a lever length of 1.5 m, the torque reached 430 N·m. A radial micro-hydropower plant has lower torque but operates constantly. At an area of 1.23 m2 and a diameter of 1 m, the torque was 40.4 N·m. Accordingly, in terms of specific area with a diameter of 1 m, a pendulum micro-hydropower plant has up to 12 times more torque. It has been established that the pendulum hydropower plant best satisfies the requirements for converting a low river speed into high revolutions of a current generator.

Design of Microhydro Power Plant Prototype by Utilizing Irrigation Water in Rice Fields Based on IoT

With increasing energy consumption where energy use still comes from fossil energy sources, so that renewable energy development efforts are needed. Utilization of renewable energy with seasonal conditions in Indonesia where rainfall is quite high, besides that there are also many rivers, waterfalls, irrigation water available in Indonesia and almost spread throughout the region. So this condition can be utilized in the water sector where flowing water is used to drive a turbine connected to a DC generator to produce a DC power source. The generating system used is the Micro Hydro Power Plant (MHP) by utilizing irrigation water in rice fields. The methods used in this research are literature study, site observation, system design, testing and data collection. In the data collection and observations made, the river flow is mathematically calculated regarding the water discharge, and also monitors the results using the IoT application.

Design Micro-Hydro Power Plant Water Resources System for Small Medium Enterprise Rice Mill in Nagari Kamang Hilia Agam

Processing rice products into rice requires further processing, where the grain harvested from farmers is processed into rice. The Nagari Binaan Community Service team from Padang State University will later develop this process. Farmer groups say that the availability of continuous and cheap electricity is their obstacle in producing good and cheap rice products. Counseling and assistance in making civil buildings capture turbulence water micro-hydro power plants is a solution to partner problems offered by the community service team of the Nagari program assisted by Padang State University. The output of the Nagari Fostered Program will be used to build a 5000-watt capacity power plant, supporting the need for free and environmentally friendly electricity. This aligns with the government's renewable energy program for 2030, which aims to produce 25% of the national electricity from renewable sources. This program is planned for 3 (three) stages, where the first year is mapping and detailed engineering design in the form of reports and design drawings. The second year is in the form of civil construction, and the third year's target is the installation of electrical machines and panels for commissioning. There will be training for partners, such as farmers in Kanagarian Kamang Hilia, Agam.

Planning of Uwe River PLTMH Jayawijaya Regency Capacity 2 X 750 KW

Indonesia has great potential to develop renewable energy, especially through Micro Hydro Power Plants (MHP) that utilize river flow. The Papua region, including Jayawijaya Regency, has significant water resources potential but has not been optimally utilized to meet local energy needs. This study aims to evaluate the technical feasibility of building an MHP in Uwe River, Jayawijaya Regency, with a capacity of 2 x 750 kW as an effort to increase the electrification ratio in Papua Mountains. The research uses a quantitative approach with field survey methods and primary data collection, such as water discharge measurements and interviews with relevant parties. The data were analyzed using the FJ Mock method for water discharge estimation and hydraulic power calculation to assess the technical feasibility of MHP development. The results showed that Uwe River has a potential hydraulic power of 2063.965 kW with a capacity factor of 88%, which is able to support the operation of two turbines with a capacity of 733.76 kW each. The conclusion of this study shows that the construction of an MHP in Sungai Uwe is technically feasible and has great potential to increase the electrification ratio, support local economic development, and reduce dependence on fossil fuels in remote areas. The implication of these results is the importance of investment and policy support in the development of renewable energy projects in Papua to achieve national electrification targets.

Determining Water Quality Status and Assimilation Capacity of Pollutant Loads in West Lombok Regency

Babak watershed is one of the essential watersheds in Lombok Island providing water supply for irrigation, fish pool, drinking water supply, and micro-hydro power plant. Excessive human activities degrade the water quality of Babak watershed, and more pollutants are present in the water column. Thus, this study aims to determine Babak watershed's water quality status and assimilating capacity to plan effective and holistic mitigation measures properly. The study calculates the pollution index (PI) using a formula based on the Minister of Environment No.115/2003 Decree and assimilating capacity (AC) based on the Minister of Environment No.110/2003 Decree. The results found that Babak watershed is lightly polluted, defined by exceeding chemical parameters such as DO, total phosphate, nitrite, and dissolved iron (Fe). Similarly, these parameters (total phosphate, nitrite, and Dissolved iron (Fe) also reached the maximum assimilation capacity of Babak watershed to contain and self-purify these pollutants from the water column. Thus, planning mitigation and adaptation measures are required to prevent further contaminations in this watershed.

Modeling of Micro-Hydropower Systems: The Case of Hhaynu Micro-Hydro Power Plant in Tanzania

Modeling of Micro-Hydropower Systems: The Case of Hhaynu Micro-Hydro Power Plant in Tanzania

Feasibility and sensitivity assessment of various heads for micro-hydropower plant design in the Deluwang watershed, Indonesia

ABSTRACT The escalating global demand for electrical energy, including in Indonesia, underscores the need for renewable energy sources like micro-hydropower plants (MHPs). This study examines the financial feasibility and sensitivity of MHP projects in the Deluwang watershed, Situbondo Regency, Indonesia. Three cases with varying head elevations and discharge rates were analyzed, utilizing crossflow turbines. Case 1, with the highest head and discharge, emerged as the most profitable, demonstrating the highest values for Net Present Value (NPV), Benefit–Cost Ratio (BCR), and Internal Rate of Return (IRR). The study found that on-grid systems, despite higher initial costs, offer more stable revenue and faster payback periods compared to off-grid systems. Sensitivity analysis revealed the on-grid method's resilience to fluctuations in interest rates, project lifespan, and river discharge, maintaining feasibility with up to an 80% reduction in discharge over 15 years. This highlights the importance of strategic planning in MHP design, considering head and discharge rates to optimize power generation. The findings provide valuable insights for renewable energy development, contributing to Indonesia's energy needs and local socio-economic benefits. Future research should further explore the socio-economic impacts of MHP installations to enhance their development and sustainability.

Analysis of Micro Hydro Potential as A New Renewable Energy Source

Electricity demand in Indonesia is currently increasing along with population growth, economic growth, and development. This increase can lead to an energy crisis if it is not accompanied by the provision of additional power plants. This study aims to analyze the micro-hydro potential located at Bangkong Waterfall, Kuningan Regency. The research uses a quantitative approach that begins with field surveys and data collection from relevant agencies. Next, the dependable discharge analysis uses the Thiessen polygon method based on rainfall data and watershed area, as well as flow discharge analysis using the rational method. The results of calculations using the Thiessen polygon method and the rational method yield Q80 with a minimum discharge of 0.009 m³/d and a maximum discharge of 1.160 m³/d. For direct discharge analysis, the Float method is used to calibrate the calculation results with field conditions. The direct discharge analysis using the Float method yields 0.32 m³/d. Based on the efficiency considerations of the micro-hydro power plant (MHPP) components such as a head of 20 meters, turbine type efficiency, water density, gravity factor, and flow discharge in the pipe of 0.109 m³/d, the potential power that can be generated at the Bangkong Waterfall micro-hydro power plant is 16,097.23 Watts or 16.097 Kilowatts.

Artificial Neural Network Model for Estimating the Pelton Turbine Shaft Power of a Micro-Hydropower Plant under Different Operating Conditions

The optimal performance of a hydroelectric power plant depends on accurate monitoring and well-functioning sensors for data acquisition. This study proposes the use of artificial neural networks (ANNs) to estimate the Pelton turbine shaft power of a 10 kW micro-hydropower plant. In the event of a failure of the sensor measuring the torque and/or rotational speed of the Pelton turbine shaft, the synthetic turbine shaft power data generated by the ANN will allow the turbine output power to be determined. The experimental data were obtained by varying the operating conditions of the micro-hydropower plant, including the variation of the input power to the electric generator and the variation of the injector opening. These changes consequently affected the flow rate and the pressure head at the turbine inlet. The use of artificial neural networks (ANNs) was deemed appropriate due to their ability to model complex relationships between input and output variables. The ANN structure comprised five input variables, fifteen neurons in a hidden layer and an output variable estimating the Pelton turbine power. During the training phase, algorithms such as Levenberg–Marquardt (L–M), Scaled Conjugate Gradient (SCG) and Bayesian were employed. The results indicated an error of 0.39% with L–M and 7% with SCG, with the latter under high-flow and -energy consumption conditions. This study demonstrates the effectiveness of artificial neural networks (ANNs) trained with the Levenberg–Marquardt (L–M) algorithm in estimating turbine shaft power. This contributes to improved performance and decision making in the event of a torque sensor failure.

ANALYSIS OF THE POTENTIAL DEVELOPMENT OF MICRO HYDRO POWER PLANT (PLTMH) IN ABENAHO DISTRICT, YALIMO REGENCY

This study examines the feasibility of the location for the construction of a micro hydro power plant (PLTMH) in Landikma Village, Abenaho District, in relation to the district government's plans. The specific objectives of this study are to determine the potential location of a PLTMH based on the applicable technical principles, as well as to compile a feasibility study for the construction of a PLTMH to support lighting/electricity services. The survey method was applied to identify the description of the existing conditions, with reference to the criteria for PLTMH development. Data analysis was carried out using quantitative and qualitative methods. Based on the research results, the PLTMH construction site in Landikma Village, Abenaho District, Yalimo Regency meets the eligibility to build a 177kW micro-hydro power plant. The river discharge at the location of the development plan is 0.950 m3/s, so the result of calculating the potential electric power generated by the PLTMH is 326.2 kW. This electrical energy is capable of meeting the lighting needs of 521 houses, assuming that each house gets 450 watts of electric power. Strategic environmental studies need to be carried out to ensure that this development does not have the potential to cause negative impacts on the environment. The PLTMH development process must also be accompanied by a comprehensive Detail Engineering Design (DED). In addition, local communities must also be involved in the process of reviewing the development, evaluation and supervision to ensure the sustainability of development and the sustainability of natural resources around the PLTMH construction site. Keywords: Potential Study, power plant, micro hydro, turbine, river.

Micro Hydro Power Plant (MHP) performance using breast-shot waterwheel with different electrical load to improve efficiency

The aim of this study is to investigate the performance of breast-shot waterwheel with different electrical loads to increase efficiency. The method used is to design a pinwheel blade using blade material with a supporting frame added to the top, middle, and bottom of the pinwheel blade. The blade material used a thickness of 1.5 mm with angle iron installed on the three sides of the blade with a size of 30 mm × 30 mm × 3 mm. Tests were carried out with variations in lamp load when the water flow rate and water velocity were constant. Parameters measured in this test are water flow rate (m3/s), velocity of water (m/s), head of water (m), generator rotation (rpm), electric current (A), and generator output voltage (V). The results of the Hydro Power Plant (MHP) test with a waterwheel drive with the highest efficiency value at a water discharge of 0.267 m3/s, a velocity of 5.069 m/s, a generator rotation of 940 rpm, and a load of 840 W, which is 10.74%.

PERANCANGAN SISTEM POMPA AIR SUNGAI YEH HA UNTUK MEMENUHI KEBUTUHAN AIR MASYARAKAT DESA ABABI

Kayuan Yeh Ha serves as a clean water source located in Ababi Village, Karangasem Regency. The flow from Kayuan Yeh Ha is utilized for both bathing dan consumption by the surrounding residents. Originating from the Yeh Ha spring, Kayuan Yeh Ha is extensively utilized to fulfill the needs of the local community. In order to meet the water requirements of the local populace, a water storage tank with a capacity of 58.74 m3 was initially established to distribute water to 10 households. In the year 2020, a water wheel was employed to power a mechanical pump without electricity to fill the storage tank. After operating for one year, the water wheel experienced shaft damage, necessitating its replacement with a hydraulic ram pump. However, the hydraulic ram pump only utilizes one-fifth of the available water flow, thereby rendering it less effective. Consequently, this research aims to design an electric water pump system powered by a new renewable energy source. The implementation of this electric water pump is expected to enhance the efficiency of filling the storage tank. Based on measurements dan calculations, the micro-hydro power plant system (PLTMH) is estimated to produce a power output of 6kW. Pump selection is determined by electrical power calculations, water discharge, dan pump prices, leading to the adoption of the Pedrollo F50-160B centrifugal pump capable of delivering a water discharge of 56m3/hour at a head of 25 meters. The Pedrollo F50-160 pump utilizes a 3-phase squirrel cage induction motor generating a power output of 5.5kW. Pipe losses dan fittings are also calculated using Pipeflow Expert software, resulting in a water discharge of 31.687 m3/hour. The pump will be operated at maximum capacity for 24 hours, enabling it to deliver a water discharge of 763,620 m3/day, sufficient to meet the clean water needs of 12,277 individuals or 2,455 families. Achieving this water usage target also necessitates piping to households from the storage tank, totaling 35,900 meters in length with an 80mm diameter dan 49,100 meters of 16mm diameter piping. This system is also equipped with a variable frequency drive or inverter device to enhance the efficiency of the electric pump dan reduce starting current surges, simulated for its performance through Simulink software.

KAJIAN ANALISIS POTENSI ENERGI BARU TERBARUKAN PADA KOTA SAMARINDA TAHUN 2023-2024 DALAM MENDUKUNG BAURAN ENERGI LISTRIK NASIONAL

The use of new and renewable energy is currently still relatively small, it’s 13.09% compared to fossil energy which is still the national primary energy. The government itself has set a target for renewable energy utilization to reach at least 31% by 2050, and the city of Samarinda is part of East Kalimantan province, which is the largest coal and oil and gas producer in Indonesia. To assist the government in achieving the EBT’s target, an analysis study was carried out on the EBT Potential in the city of Samarinda. This research was carried out by collecting data both by obtaining data in documents and taking direct measurements at certain locations. From this research, we obtained the results of identifying the type of EBT and the potential for electrical energy, namely Waste Energy, of 881.49 MW/Year. Then Solar Energy is 1,191 MWh. Wind energy is 9,933 Kwh and Water Energy for Microhydro Power Plant calculations is 292.33 Kw per year.. Keywords: potency, EBT, Energy

Towards inclusive green growth: a holistic analysis of sustainable development goals in the agritourism sector of Jambi Province

This research aims to measure the extent of inclusive green growth in Jambi Province by considering the components of the Inclusive Green Growth Index that contribute to the potential of agrotourism and sustainable growth. It seeks to identify and analyze tourism potentials that can be leveraged to support inclusive green growth in various districts of Jambi Province. Additionally, the study aims to formulate strategies applicable to tourism villages in Jambi Province to realize agrotourism areas focused on improving the well-being of communities and the environment. This research employs both quantitative and descriptive qualitative methodologies. Data sources include primary and secondary data collected through interviews, observations, literature studies, and documentation. Informants were selected using purposive sampling, covering three regencies in Jambi Province: mountainous areas in Merangin Regency, non-mountainous and non-marine areas in Muaro Jambi Regency, and marine areas in Tanjung Jabung Timur Regency. The results indicate that Jambi Province has not yet achieved green inclusivity, with an Inclusive Green Growth Index value of 3.191. The study identifies several sample areas with green development potential, including Rantau Kermas Village in Merangin Regency, Tangkit Baru Village in Muaro Jambi Regency, and Kuala Simbur Village in Tanjung Jabung Timur Regency. Key findings include the green potential of tourism and plantations, dance arts, micro-hydropower plants (PLTMH), electricity, awards, funding, fishermen, locations, culinary, mangrove forests, customary forests, and marine products. Strategies to realize agrotourism areas based on improving community well-being and the environment include strengthening organizations, enhancing the quality of human resources, developing infrastructure, funding programs, applying customary law sustainability, offering tour packages, forming customary forest management groups, conducting research and development, implementing disaster mitigation measures, promoting tourism, and initiating the adopt-a-tree program.

Assessing Voltage and Frequency Instability in Renah Kemumu's Micro Hydro Power Plant

The increasing demand for energy and the need for environmental sustainability have led to the adoption of renewable energy sources, such as micro-hydropower plants (PLTMH), in isolated communities in Indonesia. However, voltage and frequency instability issues are commonly encountered in PLTMH systems, which undermine their performance. In 2009, a micro-hydropower plant with a capacity of 30 KW was built in Renah Kemumu village. Ranah Kemumu village is located in Jangkat sub-district, Merangin district, Jambi province. In this study, the voltage and frequency instability of PLTMH in Renah Kemumu Village were investigated. The methodology employed in this study was observational. The voltage and frequency data were measured and recorded during peak load hours from 18.00 to 21.00 over one month. The percentage increase relative to the standard voltage and frequency was calculated. Boxplots were generated to visualize the distributions. The voltage measurements showed maximum and minimum values of 270 V and 264 V, representing increases of 22.72 % and 20.45% from the 220 V (standard set by the power utility (PLN)). The frequency ranged from 66.32 Hz to 57.46 Hz, corresponding to 30.92% and 14.92% deviations from the 50 Hz (standard set by the power utility (PLN)). These values exceeded the tolerance limits of the State Electricity Company of Indonesia. The analysis indicates that the voltage and frequency levels at the PLTMH in Renah Kemumu Village are unstable during peak loads, with fluctuations stemming from changing water flows, load currents, and weather conditions

PENGARUH VARIASI TINGGI SUDU TURBIN DARI TINGGI BASIN TERHADAP DAYA DAN EFISIENSI TURBIN VORTEX

Electrical energy is a very important need for human life in various aspects, both on a large and small scale. One of the efforts to reduce the use of fossil fuels is to use natural resources that are not limited and can be renewed. Micro Hydro Power Plant (MHP) is an alternative source of electricity for the community, one of which is a vortex turbine. The vortex turbine is one type of micro hydro turbine that utilizes a whirlpool as a blade drive. This study examines the effect of blade height variations of 25%, 30%, and 35% of the basin height on power and efficiency. The results showed that the largest turbine power at 25% blade height variation from the basin height with a discharge of 0.009 m3/s was 3.294 Watt with an efficiency of 51.10%. The largest turbine power at an angle variation of 30% of the basin height with a discharge of 0.009 m3/s is 3.364 Watt with an efficiency of 50.66%. The largest turbine power at an angle variation of 35% of the basin height with a discharge of 0.009 m3/s is 4.062 Watt with an efficiency of 62.35%. Turbine power based on two-way anova analysis shows that between variations in turbine height and flow discharge have a significant effect on the turbine power produced and turbine efficiency based on two-way anova analysis shows that between variations in turbine height and flow discharge have a significant effect on the turbine efficiency produced.

Performance of Dodging Channels and Cofferdams Against Flood Flows in the Construction of Bener Dams

Bener Dam is one of the new dams built in Bogowonto River, in Guntur Village, Bener District, Purworejo Regency. Bener Dam was constructed to fulfill the irrigation and raw water demand, and also as a flood control, and a micro-hydro power plant, conservation, and tourism that can improve the economy. The diversion works of the Dam consist of the construction of a cofferdam and a diversion tunnel. The cofferdam and diversion tunnel need to be planned well to prevent the river from overflowing through the main dam and causing material losses and casualties. Therefore it is necessary to study the performance of cofferdam and the diversion tunnel of Bener Dam against the flood discharge. In this study, the diversion tunnel flood routing was carried out by HEC-RAS software version 4.1.0. The design flood uses return periods of 25 and 50 years. The flood routing simulation is carried out by two scenarios: the flow simulation on the existing conditions and the flow simulation on the diversion tunnel. The research results show that the Bogowonto River still can accommodate 25-year, and 50-year floods along the river channel. The cofferdam with a peak elevation of +235 m which is designed with a discharge of 410 m3/s is also capable of diverting the flood discharge with a return period of 25 years and 50 years. The diversion tunnel of Bener dam is planned by a horseshoe shape F, with a 25-year flood design with 7m tunnel diameter Based on the flood routing analysis, it was found that the maximum water elevation in the diversion tunnel was +221 m, and with outflow of 332 m3/s. The 50-year flood routing in the diversion tunnel results maximum water elevation of +222 m with an outflow of 396 m3/s. The flood simulation shows the flow characteristics in the diversion tunnel in the form of open channel flow because the tunnel is not filled by water. Then, the maximum flow velocity on the diversion tunnel is ±14.3 m/s which exceeds the permissible velocity so it can cause damage due to erosion and affect the amount of sediment transport.

New Design of A Micro-Hydro Power Plant (MHPP) System In The 3T Region As Al-ternative Solution Unit Turbine Using Computational Fluid Dynamics (CFD) Simulation

New Design of A Micro-Hydro Power Plant (MHPP) System In The 3T Region As Al-ternative Solution Unit Turbine Using Computational Fluid Dynamics (CFD) Simulation

Optimasi LFC (Load Frequency Control) Pada Mikrohidro Menggunakan Metode ACO-ANFIS dan BA-ANFIS

Micro-hydro Power Plant is a small-scale power plant. Micro-hydro plants are built with enough water potential to generate electrical energy. A common problem with micro-hydro generating systems is that the output of the generator is not constant. This is caused by changes in connected loads. Thus causing frequent fluctuations in the frequency and voltage of the system that can cause damage to electrical equipment. Because it is used Load Frequency Control (LFC) to control the frequency can be more stable. To obtain optimal control parameters on micro hydropower systems used by Artificial Intelligence (AI) is Adaptive Neuro-Fuzzy Inference System (ANFIS). ANFIS data is retrieved from training data of PID controllers tuned using Ant Colony Optimization (ACO) and Bat Algorithm (BA). This study compared uncontrolled methods, PID-ZN control methods, PID-ACO method, PID-BA, PID-ACO-ANFIS, and PID-BA-ANFIS obtained the best control method. The result of this research is the control method of PID-ACO-ANFIS is the best control method with overshoot 0.00 and the fastest settling time is 0.00. The results showed that the smallest overshoot (0) in the PID-ACO-ANFIS model, the smallest undershoots (1,12x10-5) in PID-ACO-ANFIS and the fastest settling time (3.77 seconds) in the starting also at PID-ACO-ANFIS. The results of this study will be tried bengan other methods, which results may be better

SCADA implementation in microhydro power plant control and monitoring systems of screw turbine type

Screw turbine-type micro-hydro power plants are still controlled manually by humans when there is a change in the electrical load on the generator output. If there is a change in the electrical load, the generator output voltage will change, thus affecting the rotation of the turbine being used. In this case, humans are needed to manually regulate the flow of water entering the turbine to maintain the stability of the generator output voltage by controlling the sluice gate. The water discharge entering the screw turbine will rotate the generator through a belt/gearbox pulley transmission, thus producing an electrical voltage at the generator output. To maintain the stability of the generator output voltage, it is necessary to control the water discharge entering the screw turbine. The expected goal of this research is to design a control system for a screw turbine type microhydro power plant to stabilize the generator output voltage and monitor the output of a screw turbine type generator using a SCADA (Supervisory Control, and Data Aquisition) system. The method used is the research and development method, namely the system design stage based on secondary data that has been collected, where the system design includes hardware design and software design, followed by making hardware such as control panels and devices. Software, which includes display design and leader diagrams and testing, is carried out by testing the system on software, hardware, and overall system testing. From the results of the discussion and analysis, the screw turbine type microhydro power plant control design system was created, a load control system consisting of 6 groups and sluice gate opening control that uses an ultrasonic sensor to determine the water level. With the results of controlling the sluice gate at a door opening of 30 mm, the generator voltage is 18.42 Volts DC, DC current is 0.0 Ampere at a load of 0 watts, when the load is 30 watts the generator voltage decreases by 18.40 volts, current is 1.37 Ampere. Through the on-line monitoring system, electrical parameters are obtained which are displayed on the SCADA system by looking in real-time at the history of DC voltage and DC current, DC power, and DC energy generated by the screw turbine-type DC generator. The voltage read is 18. 57 volts, current 1.37 Amperes, DC electrical power is 25.4 watts with a DC light load of 30 watts.