Methyl Hydroquinone Research Articles

Crystal and mol-ecular structure of 2-methyl-1,4-phenyl-ene bis-(3,5-di-bromo-benzoate).

The aryl diester compound, 2-methyl-1,4-phenyl-ene bis-(3,5-di-bromo-benzoate), C21H12Br4O4, was synthesized by esterification of methyl hydro-quinone with 3,5-di-bromo-benzoic acid. A crystalline sample was obtained by cooling a sample of the melt (m.p. = 502 K/DSC) to room temperature. The mol-ecular structure consists of a central benzene ring with anti-3,5-di-bromo-benzoate groups symmetrically attached at the 1 and 4 positions and a methyl group attached at the 2 position of the central ring. In the crystal structure (space group P), mol-ecules of the title aryl diester are located on inversion centers imposing disorder of the methyl group and H atom across the central benzene ring. The crystal structure is consolidated by a network of C-H⋯Br hydrogen bonds in addition to weaker and offset π-π inter-actions involving the central benzene rings as well as the rings of the attached 3,5-di-bromo-benzoate groups.

Proliferation Inhibitory Activity of Quinones from Blaps rynchopetera Defense Secretion on Colorectal Tumor Cells.

To explore the proliferation inhibitory effect of quinones from Blaps rynchopetera defense secretion on colorectal tumor cell lines. Human colorectal cancer cell HT-29, human colorectal adenocarcinoma cell Caco-2 and normal human colon epithelial cell CCD841 were chosen for the evaluation of inhibitory activity of the main quinones of B. rynchopetera defense secretion, including methyl p-benzoquinone (MBQ), ethyl p-benzoquinone (EBQ), and methyl hydroquinone (MHQ), through methyl thiazolyl tetrazolium assay. The tumor-related factors, cell cycles, related gene expressions and protein levels were detected by enzyme-linked immunosorbent assy, flow cytometry, RT-polymerase chain reaction and Western blot, respectively. MBQ, EBQ, and MHQ could significantly inhibit the proliferation of Caco-2, with half maximal inhibitory concentration (IC50) values of 7.04 ± 0.88, 10.92 ± 0.32, 9.35 ± 0.83, HT-29, with IC50 values of 14.90 ± 2.71, 20.50 ± 6.37, 13.90 ± 1.30, and CCD841, with IC50 values of 11.40 ± 0.68, 7.02 ± 0.44 and 7.83 ± 0.05 µg/mL, respectively. Tested quinones can reduce the expression of tumor-related factors tumor necrosis factor α, interleukin (IL)-10, and IL-6 in HT-29 cells, selectively promote apoptosis, and regulate the cell cycle which can reduce the proportion of cells in the G1 phase and increase the proportion of the S phase. Meanwhile, tested quinones could up-regulate mRNA and protein expression of GSK-3β and APC, while down-regulate that of β-catenin, Frizzled1, c-Myc, and CyclinD1 in the Wnt/β-catenin pathway of HT-29 cells. Quinones from B. rynchopetera defense secretion could inhibit the proliferation of colorectal tumor cells and reduce the expression of related factors, which would be functioned by regulating cell cycle, selectively promoting apoptosis, and affecting Wnt/β-catenin pathway-related mRNA and protein expressions.

Constant oxidation of atrazine in Fe(III)/PDS system by enhancing Fe(III)/Fe(II) cycle with quinones: Reaction mechanism, degradation pathway and DFT calculation

Quinones are potential pollutants and redox active compounds widely distributed in environmental media. In this study, methyl-p-benzoquinone (MBQ) was introduced into Fe(III)/peroxydisulfate system (Fe(III)/PDS) to expedite the conversion of Fe(III) to Fe(II) and the degradation of atrazine (ATZ), ultimately establishing an environmentally friendly system of “treating pollution with pollution”. MBQ/Fe(III)/PDS system showed superior performance to traditional Fe(II)/PDS system in pH range of 2–7. Sulfate radical (SO4•−) and hydroxyl radical (•OH) were confirmed to exist in MBQ/Fe(III)/PDS system according to alcohol quenching experiments and ESR tests. Meanwhile, stable 80% of η[PMSO2] (i.e., the molar ratio of PMSO2 generation to PMSO consumption) was achieved and manifested that highly reactive substance Fe(IV) also participated in MBQ/Fe(III)/PDS system. The spontaneous transformation of MBQ and methyl-hydroquinone (MHQ) drove Fe(III)/Fe(II) cycle, during which MHQ induced Fe(III) reduction and Fe(II) regeneration. Transformation pathways of ATZ were proposed based on HPLC-MS detection and DFT calculation and ATZ degradation could be initiated by lateral chain oxidation and dechlorination-hydroxylation. The acute toxicity, bioaccumulation factor, developmental toxicity and mutagenicity of ATZ and its degradation intermediates were evaluated by Toxicity Estimation Software Tool, and the luminescent bacteria test was conducted to investigate the acute toxicity variation of the reaction solution. Cl− obviously inhibited ATZ degradation and three main by-products generation, while humic acid (HA) had little effect on them probably due to the established balance between inhibition (some components in HA competed to consume reactive species) and acceleration (quinone units in HA also facilitated Fe(III)/Fe(II) cycle).

Characterization of the activity and the mechanism of action of a new toluquinol derivative with improved potential as an antiangiogenic drug

The inhibition of sustained angiogenesis is an attractive approach for the treatment of cancer, blindness and other angiogenesis-dependent diseases. Encouraged by our previous finding that toluquinol, a methyl hydroquinone isolated from a marine fungus, exhibited an interesting antiangiogenic activity, we further explored structural modifications of this natural compound in order to develop improved drug candidates. Our results indicate that although the methyl group plays a relevant role in the cytotoxic activity of toluquinol, some derivatives in which this methyl was replaced by another substituent, could keep the antiangiogenic activity, whereas exhibiting a lower cytotoxicity in vitro. This is the case of (E)− 2-(3-methoxyprop-1-en-1-yl) benzene-1,4-diol, which exhibits a decreased toxicity, whereas maintaining or even improving the antiangiogenic activity of toluquinol, as demonstrated by a number of in vitro (endothelial cells proliferation, migration and tube formation) and in vivo (chick embryo chrorioallantoic membrane vascularization and murine corneal neovascularization) experimental approaches. Our results point to a mechanism of action that could be related to an induction of apoptosis, as well as to an increase in the reactive oxygen species levels, a reduction of the redox capacity and the inhibition of the VEGFR2, Akt and ERK phosphorylation in VEGF-activated endothelial cells. The biological activity of this new angiogenesis inhibitor, along with its lower undesired toxicity, suggests that it is a promising drug candidate with improved potential for the treatment of angiogenesis-related diseases.

Colorimetric determination of phenolic compounds using peroxidase mimics based on biomolecule-free hybrid nanoflowers consisting of graphitic carbon nitride and copper.

Hybrid nanoflowers consisting of graphitic carbon nitride (GCN) and copper were successfully constructed without the involvement of any biomolecule, by simply mixing them at room temperature to induce proper self-assembly to achieve a flower-like morphology. The resulting biomolecule-free GCN-copper hybrid nanoflowers (GCN-Cu NFs) exhibited an apparent peroxidase-mimicking activity, possibly owing to the synergistic effect from the coordination of GCN and copper, as well as their large surface area, which increased the number of catalytic reaction sites. The peroxidase-mimicking GCN-Cu NFs were then employed in the colorimetric determination of selected phenolic compounds hydroquinone (HQ), methylhydroquinone (MHQ), and catechol (CC). For samples without phenolic compounds, GCN-Cu NFs catalyzed the oxidation of the peroxidase substrate 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H2O2, producing an intense blue color signal. Conversely, in the presence of phenolic compounds, the oxidation of TMB was inhibited, resulting in a significant reduction ofthe color signal. Using this strategy, HQ, MHQ, and CC were selectively and sensitively determined in a linear range up to 100μM with detection limits down to 0.82, 0.27, and 0.36μM, respectively. The practical utility of this assay system was also validated by using it to detect phenolic compounds spiked in tap water, yielding a good recovery of 97.1-108.9% and coefficient of variation below 3.0%, demonstrating the excellent reliability and reproducibility of this strategy. Colorimetric determination of phenolic compounds using peroxidase mimics based on biomolecule-free hybrid nanoflowers consisting of graphitic carbon nitride and copper.

Chemical Profile and Antimicrobial Activity of the Fungus-Growing Termite Strain Macrotermes Bellicosus Used in Traditional Medicine in the Republic of Benin.

The fungus growing termite species Macrotermes bellicosus (M. bellicosus) is used in nutrition and traditional medicine in the Republic of Benin for the treatment of infectious and inflammatory diseases. Previous findings demonstrated evidence of anti-inflammatory and spasmolytic properties of M. bellicosus. The aim of the present study was to evaluate the antimicrobial potential of different extracts of M. bellicosus samples and determine the chemical profile of an ethanolic M. bellicosus extract. Chemical profiling was conducted using centrifugal partition chromatography and 13C-NMR, followed by MALDI-TOF MS. Major identified compounds include hydroquinone (HQ), methylhydroquinone (MHQ), 3,4-dihydroxyphenethyl glycol (DHPG), N-acetyldopamine (NADA) and niacinamide. The fatty acid mixture of the extract was mainly composed of linoleic and oleic acid and highlights the nutritional purpose of M. bellicosus. Using the Kirby–Bauer disc diffusion and broth microdilution assay, an antibacterial activity of M. bellicosus samples was observed against various clinical strains with a highest growth inhibition of S. aureus. In addition, HQ and MHQ as well as fractions containing DHPG, niacinamide and NADA inhibited S. aureus growth. The reported antimicrobial activity of M. bellicosus and identified active substances provide a rationale for the traditional medicinal use of M. bellicosus.

The MarR-Type Repressor MhqR Confers Quinone and Antimicrobial Resistance in Staphylococcus aureus.

Aims: Quinone compounds are electron carriers and have antimicrobial and toxic properties due to their mode of actions as electrophiles and oxidants. However, the regulatory mechanism of quinone resistance is less well understood in the pathogen Staphylococcus aureus.Results: Methylhydroquinone (MHQ) caused a thiol-specific oxidative and electrophile stress response in the S. aureus transcriptome as revealed by the induction of the PerR, QsrR, CstR, CtsR, and HrcA regulons. The SACOL2531-29 operon was most strongly upregulated by MHQ and was renamed as mhqRED operon based on its homology to the Bacillus subtilis locus. Here, we characterized the MarR-type regulator MhqR (SACOL2531) as quinone-sensing repressor of the mhqRED operon, which confers quinone and antimicrobial resistance in S. aureus. The mhqRED operon responds specifically to MHQ and less pronounced to pyocyanin and ciprofloxacin, but not to reactive oxygen species (ROS), hypochlorous acid, or aldehydes. The MhqR repressor binds specifically to a 9–9 bp inverted repeat (MhqR operator) upstream of the mhqRED operon and is inactivated by MHQ in vitro, which does not involve a thiol-based mechanism. In phenotypic assays, the mhqR deletion mutant was resistant to MHQ and quinone-like antimicrobial compounds, including pyocyanin, ciprofloxacin, norfloxacin, and rifampicin. In addition, the mhqR mutant was sensitive to sublethal ROS and 24 h post-macrophage infections but acquired an improved survival under lethal ROS stress and after long-term infections.Innovation: Our results provide a link between quinone and antimicrobial resistance via the MhqR regulon of S. aureus.Conclusion: The MhqR regulon was identified as a novel resistance mechanism towards quinone-like antimicrobials and contributes to virulence of S. aureus under long-term infections.

Synthesis, Biological Evaluation, and Docking Analysis of Methyl Hydroquinone and Bromo Methyl Hydroquinone as Potent Cyclooxygenase (COX-1 and COX-2) Inhibitors

In the present investigation, synthesis, biological evaluation, and molecular docking were performed for both methyl hydroquinone (1) and its brominated compound (2) to evaluate their anti-inflammatory activity against cyclooxygenase protein as a model compound and the data compared with its native ligands.

Characterization of the 3-methyl-4-nitrophenol degradation pathway and genes of Pseudomonas sp. strain TSN1

3-Methyl-4-nitrophenol (3M4NP) is formed in soil as a hydrolysis product of fenitrothion, one of the major organophosphorus pesticides. A Pseudomonas strain was isolated as a 3M4NP degrader from a crop soil and designated TSN1. This strain utilized 3M4NP as a sole carbon and energy source. To elucidate the biodegradation pathway, we performed transposon mutagenesis with pCro2a (mini-Tn5495) and obtained three mutants accumulating a dark pink compound(s) from 3M4NP. Rescue cloning and sequence analysis revealed that in all mutants, the transposon disrupted an identical aromatic compound meta-cleaving dioxygenase gene, and a monooxygenase gene was located just downstream of the dioxygenase gene. These two genes were designated mnpC and mnpB, respectively. The gene products showed high identity with the methylhydroquinone (MHQ) monooxygenase (58%) and the 3-methylcatechol 2,3-dioxygenase (54%) of a different 3M4NP degrader Burkholderia sp. NF100. The transposon mutants converted 3M4NP or MHQ into two identical metabolites, one of which was identified as 2-hydroxy-5-methyl-1,4-benzoquinone (2H5MBQ) by GC/MS analysis. Furthermore, two additional genes (named mnpA1 and mnpA2), almost identical to the p-nitrophenol monooxygenase and the p-benzoquinone reductase genes of Pseudomonas sp. WBC-3, were isolated from the total DNA of strain TSN1. Disruption of mnpA1 resulted in the complete loss of the 3M4NP degradation activity, demonstrating that mnpA1 encodes the initial monooxygenase for 3M4NP degradation. The purified mnpA2 gene product could efficiently reduce methyl p-benzoquinone (MBQ) into MHQ. These results suggest that strain TSN1 degrades 3M4NP via MBQ, MHQ, and 2H5MBQ in combination with mnpA1A2 and mnpCB, existing at different loci on the genome.

Biochemical Characterization of 3-Methyl-4-nitrophenol Degradation in Burkholderia sp. Strain SJ98.

Several strains have been reported to grow on 3-methyl-4-nitrophenol (3M4NP), the primary breakdown product of the excessively used insecticide fenitrothion. However, the microbial degradation of 3M4NP at molecular and biochemical levels remains unknown. Here, methyl-1,4-benzoquinone (MBQ) and methylhydroquinone (MHQ), rather than catechol proposed previously, were identified as the intermediates before ring cleavage during 3M4NP degradation by Burkholderia sp. strain SJ98. Real-time quantitative PCR analysis indicated that the pnpABA1CDEF cluster involved in para-nitrophenol (PNP) and 2-chloro-4-nitrophenol (2C4NP) catabolism was also likely responsible for 3M4NP degradation in this strain. Purified PNP 4-monooxygenase (PnpA) is able to catalyze the monooxygenation of 3M4NP to MBQ and exhibited an apparent Km value of 20.3 ± 2.54 μM for 3M4NP, and pnpA is absolutely necessary for the catabolism of 3M4NP by gene knock-out and complementation. PnpB, a 1,4-benzoquinone reductase catalyzes the reduction of MBQ to MHQ, and also found to enhance PnpA activity in vitro in the conversion of 3M4NP to MBQ. By sequential catalysis assays, PnpCD, PnpE, and PnpF were likely involved in the lower pathway of 3M4NP catabolism. Although NpcCD, NpcE, and NpcF are able to catalyze the sequential conversion of MHQ in vitro, these enzymes are unlikely involved in 3M4NP catabolism because their coding genes were not upregulated by 3M4NP induction in vivo. These results revealed that the enzymes involved in PNP and 2C4NP catabolism were also responsible for 3M4NP degradation in strain SJ98. This fills a gap in our understanding of the microbial degradation of 3M4NP at molecular and biochemical levels and also provides another example to illustrate the adaptive flexibility in microbial catabolism for structurally similar compounds.

Degradation of Carcinogenic Hydroquinone in Coal Gasification Wastewater by Using Anaerobic Shaker Test

Coal gasification wastewater, as a typical industrial wastewater has poor biodegradability and high toxicity. In this paper, simple anaerobic shaker test was conducted to investigate the degradation of hydroquinone in coal gasification wastewater. Anaerobic sludge shaker test were run for 27, 50 and 73 days, the phenol concentration were adjusted to 300 mg/L and 500 mg/L with pH 7.5, respectively. The experimental results also showed that this system could effectively deal with COD and phenol removal and remain in a stable level when the operational parameters altered while the hydrolysis acidification at 45h is appropriate. Organics degradation and transformation of anaerobic coal gasification wastewater samples at 12h, 24h, 36h, 48h, and 60h were analyzed by GC/MS and it was found that hydrolysis acidification played an important role in degradation of methyl phenol, hydroquinone and refractory compounds. Therefore, the results illustrated that the simple anaerobic shaker process is an easy way for pollutant degradation and treat coal gasification wastewater effectively.

Characterizations of Bamboo Succus And Alkaline Peroxide Mechanical Pulping (APMP) Brightness of Bambusa Chungii

Abstract The effects of pre-extraction and of the main components of bamboo succus on the alkaline peroxide mechanical pulping (APMP) pulp brightness of bambusa chungii are investigated by gas chromatography-mass spectroscopy (GC-MS) and infrared spectroscopy analysis. The results show that the chromophore and auxochrome groups of unsaturated bonds are plentiful in the bamboo succus. The contents of methyl benzene, xylene, and hydroquinone (75.88%, 0.98%, and 0.41%, respectively) are high in bamboo succus, and the three materials have great effect on APMP brightness, especially the hydroquinone. For the APMP with the bamboo chip by 60% ethanol pre-extracting, the brightness of unbleached pulp is higher about 5% ISO, the brightness of bleached pulp is higher about 4.2% ISO, and the p.c value is lower. If methyl benzene, xylene, and hydroquinone are added into the pulp, the CH3, CH2, acetyl, conjugated carbonyl C = O and C-O can be increased. The XPS analysis indicates that on the surface of pulp, the content of non-carbohydrate and the C = O, O - C - O and O = C - O increases, but the content of carbohydrate decreases if such additives are added.

Synthesis and Inhibition of Tyrosinase Acitivity of New Gentisic Acid Derivatives

To discover new whitening active compounds, ten novel 2-hydroxy-5-alkyl(H)oxybenzoic ester derivatives (3a, 3b and 6a~6h) were prepared via the starting materials of methyl gentisate, alkyl halides and α-hydroxy acid ethyl ester. Their chemical structures were confirmed by 1 H NMR, IR, MS and HRMS techniques. The preliminary bioassay test demonstrated that compounds 6a, 6b, 6e and 6f had stronger inhibition of tyrosinase activity. Further pharmacological experiments showed that after substitution modification of compounds 6a~6h, their toxicity and phototoxicity are lower than methyl gentisate and hydroquinone.

Complementary cooperation between two syntrophic bacteria in pesticide degradation

Interactions between microbial species, including competition and mutualism, influence the abundance and distribution of the related species. For example, metabolic cooperation among multiple bacteria plays a major role in the maintenance of consortia. This study aims to clarify how two bacterial species coexist in a syntrophic association involving the degradation of the pesticide fenitrothion. To elucidate essential mechanisms for maintaining a syntrophic association, we employed a mathematical model based on an experimental study, because experiment cannot elucidate various conditions for two bacterial coexistence. We isolated fenitrothion-degrading Sphingomonas sp. TFEE and its metabolite of 3-methyl-4-nitrophenol (3M4N)-degrading Burkholderia sp. MN1 from a fenitrothion-treated soil microcosm. Neither bacterium can completely degrade fenitrothion alone, but they can utilize the second intermediate, methylhydroquinone (MHQ). Burkholderia sp. MN1 excretes a portion of MHQ during the degradation of 3M4N, from which Sphingomonas sp. TFEE carries out degradation to obtain carbon and energy. Based on experimental findings, we developed mathematical models that represent the syntrophic association involving the two bacteria. We found that the two bacteria are characterized by the mutualistic degradation of fenitrothion. Dynamics of two bacteria are determined by the degree of cooperation between two bacteria (i.e., supply of 3M4N by Sphingomonas sp. TFEE and excretion of MHQ by Burkholderia sp. MN1) and the initial population sizes. The syntrophic association mediates the coexistence of the two bacteria under the possibility of resource competition for MHQ, and robustly facilitates the maintenance of ecosystem function in terms of degrading xenobiotics. Thus, the mathematical analysis and numerical computations based on the experiment indicate the key mechanisms for coexistence of Sphingomonas sp. TFEE and Burkholderia sp. MN1 in syntrophic association involving fenitrothion degradation.

Synthesis of a 5-((Aryloxy)methyl)-3-(4-(trifluoromethyl)phenyl)[1,2,4]thiadiazole Derivative: A Promising PPARα,δ Agonist

The preparation of the PPARα,δ agonist 2-methyl-2-(2-methyl-4-(3-(4-(trifluoromethyl)phenyl)[1,2,4]thiadiazol-5-ylmethoxy)phenoxy)propionic acid sodium salt (17) is described and compared with earlier in-house preparations of this important target compound. Key concerns around a large-scale synthesis of this thiadiazole derivative were a large number of purification steps, the use of dichlorobenzene as a solvent, and a possible large-scale Baeyer–Villiger oxidation. This paper describes a straightforward preparation of the target agonist using methylhydroquinone (MHQ) as an inexpensive precursor that eliminates the need of an oxidation step.

Synthesis and characterization of cholesteric thermotropic liquid crystalline polyesters

AbstractCholesteric liquid crystalline polyesters were successfully synthesized from isosorbide, methyl hydroquinone, and isophthaloyl chloride. Homo/copolyesters were synthesized by the solution polycondensation method, for which a mild organic base such as pyridine was employed. Inherent viscosities of polyesters P‐3–P‐5 were in the range of 0.31–0.39 dL/g at 25°C in chloroform, and polyesters P‐1 and P‐2 were insoluble in chloroform. Homo/copolyesters based on isosorbide, methyl hydroquinone, and isophthalic acid had thermal stability at more than 300°C on the basis of 10% weight loss. The thermotropic liquid crystalline properties were examined by differential scanning calorimetry and polarizing optical microscopy. Wide‐angle X‐ray diffraction study demonstrated that polyesters P‐1, P‐2, and P‐3 were semicrystalline, whereas the degree of crystallinity of polyesters P‐4 and P‐5 was less than 5%. Copolyester P‐4 showed formation of a yellow iridescent streak at 209°C on heating and development of a Grandjean texture at 270°C on heating. These are typical textures of the cholesteric liquid crystalline phase. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1232–1237, 2007

Poly(ether ether ketone) with pendent methyl groups as a toughening agent for amine cured DGEBA epoxy resin

A diglycidyl ether of bisphenol-A (DGEBA) epoxy resin was modified with poly(ether ether ketone) with pendent methyl groups (PEEKM). PEEKM was synthesised from methyl hydroquinone and 4,4′-difluorobenzophenone and characterised. Blends of epoxy resin and PEEKM were prepared by melt blending. The blends were transparent in the uncured state and gave single composition dependent Tg. The Tg-composition behaviour of the uncured blends has been studied using Gordon–Taylor, Kelley–Bueche and Fox equations. The scanning electron micrographs of extracted fracture surfaces revealed that reaction induced phase separation occurred in the blends. Cocontinuous morphology was obtained in blends containing 15 phr PEEKM. Two glass transition peaks corresponding to epoxy rich and thermoplastic rich phases were observed in the dynamic mechanical spectrum of the blends. The crosslink density of the blends calculated from dynamic mechanical analysis was less than that of unmodified epoxy resin. The tensile strength, flexural strength and modulus were comparable to that of the unmodified epoxy resin. It was found from fracture toughness measurements that PEEKM is an effective toughener for DDS cured epoxy resin. Fifteen phr PEEKM having cocontinuous morphology exhibited maximum increase in fracture toughness. The increase in fracture toughness was due to crack path deflection, crack pinning, crack bridging by dispersed PEEKM and local plastic deformation of the matrix. The exceptional increase in fracture toughness of 15 phr blend was attributed to the cocontinuous morphology of the blend. Finally it was observed that the thermal stability of epoxy resin was not affected by the addition of PEEKM.

Synthesis and properties of poly ether nitrile sulfone copolymers with pendant methyl groups

AbstractPoly ether nitrile and poly ether nitrile sulfone copolymers with pendant methyl groups were prepared by the nucleophilic substitution reaction of 2,6′‐dichlorobenzonitrile with methyl hydroquinone and with varying mole proportions of methyl hydroquinone and 4,4′dihydroxydiphenylsulfone using N‐methyl pyrrolidone as solvent in the presence of anhydrous K2CO3. The polymers were characterized by different physicochemical techniques. Copolymer composition was determined using FTIR technique. Thermogravimetric data reveals that all the polymers were stable up to 420°C with a char yield above 40% at 900°C in N2 atmosphere. The glass transition temperature was found to increase and the activation energy and inherent viscosities were found to decrease with increase in concentration of the 4,4′‐dihydroxydiphenylsulfone units in the polymer. Trimerization reactions are found to be favorable with increase in concentration of methyl hydroquinone units in the polymer. Crystallinity of the polymer was also studied using wide angle X‐ray diffraction. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1303–1309, 2006

Hydroxyl terminated poly(ether ether ketone) with pendent methyl group toughened epoxy resin: miscibility, morphology and mechanical properties

The synthesis, processing, thermal and mechanical properties and fracture toughness of epoxy resin formulated with hydroxyl terminated poly(ether ether ketone) with pendent methyl group are reported. Hydroxyl terminated poly(ether ether ketone) oligomers based on methyl hydroquinone (PEEKMOH) were synthesised from methylhydroquinone and 4,4′-difluorobenzophenone in N-methyl-2-pyrrolidone. PEEKMOH oligomers with different molecular weights were synthesised and characterised. Blends of diglycidyl ether of bisphenol-A epoxy resin with PEEKMOH were prepared by melt mixing. The uncured blends were homogeneous and the T g-composition behaviour was predicted using Fox, Gordon–Taylor and Kelley–Bueche equations. Reaction induced phase separation occurred in the blends on curing with 4,4′-diaminodiphenyl sulfone. Scanning electron microscopy studies revealed the two-phase morphology of the blends. Domain size of the blends increased with increase in PEEKMOH8 in the blends. Phase separation in the blends occurred by nucleation and growth mechanism. Infrared spectroscopic studies revealed that some of the epoxy groups were opened up by hydroxyl group of PEEKMOH. The tensile and flexural properties of the blends were comparable to that of neat epoxy resin and the properties were dependent on the composition of the blend and molecular weight of PEEKMOH used. Dynamic mechanical analysis revealed two glass transition temperatures corresponding to epoxy rich and thermoplastic rich phases. The crosslink density of epoxy resin decreased with the addition of PEEKMOH to epoxy resin. The blends exhibited superior fracture toughness compared to unmodified epoxy resin. The increase in fracture toughness was due to local plastic deformation of the matrix, crack path deflection and crack pinning. The thermal stability of amine cured epoxy resin was not affected by the incorporation of PEEKMOH into the epoxy resin.

Synthesis and properties of poly(ether nitrile sulfone) copolymers with pendant methyl groups

Poly(ether nitrile) and poly(ether nitrile sulfone) copolymers with pendant methyl groups were prepared by the nucleophilic substitution reaction of 2,6′-dichlorobenzonitrile with methyl hydroquinone and with varying mole proportions of methyl hydroquinone and 4,4′-dihydroxydiphenylsulfone using N-methyl pyrrolidone as a solvent in the presence of anhydrous K2CO3. The polymers were characterized by different physicochemical techniques. Copolymer composition was determined using the FTIR technique. Thermogravimetric data revealed that all polymers were stable up to 420°C with a char yield above 40% at 900°C in a nitrogen atmosphere. The glass-transition temperature increased and the activation energy and inherent viscosities decreased with an increase in the concentration of the 4,4′-dihydroxydiphenylsulfone units in the polymer. Trimerization reactions were favorable with an increase in the concentration of methyl hydroquinone units in the polymer. The crystallinity of the polymer was also studied using wide-angle X-ray diffraction. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1987–1994, 2005