Signal Transmission Method Research Articles

A novel method for vibration signal transmission and attenuation analysis in complex planetary gearboxes

A novel method for vibration signal transmission and attenuation analysis in complex planetary gearboxes

Research on Surface Processing Method of Pulse Transmission Signal of Amplitude-Modulated Drilling Fluid in 10,000-m Deep Wells

Conventional Measurement-While-Drilling (MWD) technology is unable to function statically at the predicted temperatures of deep formations exceeding 200 °C in wells reaching depths of 10,000 m. It is limited to measuring downhole engineering parameters through purely mechanical means, such as inclination. However, the accurate long-distance transmission of drilling fluid pulse signals poses a significant bottleneck, restricting the application of these mechanical measurement methods. To address these issues, this paper develops and designs an algorithm to identify and analyze the amplitude characteristics of deep well mud signals. By employing a signal coding algorithm, a signal processing analysis method, and a signal feature recognition algorithm based on grey correlation degree, we construct a signal recognition method capable of decoding mud amplitude encoded signals. Key techniques such as filtering, smoothing, and feature extraction are utilized in the signal processing, and the proposed method’s effectiveness is verified through the analysis of collected signals. Furthermore, long-distance simulation analysis software is developed to evaluate waveform distortion during extended transmission, confirming the feasibility of the recognition algorithm. Laboratory experiments demonstrate that this algorithm can accurately recognize and demodulate signals generated by mechanical inclinometer structures, providing a novel decoding method for signal transmission in deep and ultra-deep wells.

A tactile sensing system capable of recognizing objects based on bioinspired self-sensing soft pneumatic actuator

Tactile sensors play an important role when robots perform contact tasks, such as physical information collection, force or displacement control to avoid collision. For these manipulations, excessive contact may cause damage while poor contact cause information loss between the robotic end-effector and the objects. Inspired by skin structure and signal transmission method, this paper proposes a tactile sensing system based on the self-sensing soft pneumatic actuator (S-SPA) capable of providing tactile sensing capability for robots. Based on the adjustable height and compliance characteristics of the S-SPA, the contact process is safe and more tactile information can be collected. And to demonstrate the feasibility and advantage of this system, a robotic hand with S-SPAs could recognize different textures and stiffness of the objects by touching and pinching behaviours to collect physical information of the various objects under the positive work states of the S-SPA. The result shows the recognition accuracy of the fifteen texture plates reaches 99.4%, and the recognition accuracy of the four stiffness cuboids reaches 100%by training a KNN model. This safe and simple tactile sensing system with high recognition accuracies based on S-SPA shows great potential in robotic manipulations and is beneficial to applications in domestic and industrial fields.

Research on Tunnel Boring Machine Tunnel Water Disaster Detection and Radar Echo Signal Processing

This study focused on the detection of water inrush in tunnels excavated by full-section hard rock tunnel boring machines (TBMs) and employed ground penetrating radar methods for conducting research on radar signal processing algorithms. The research demonstrates that conventional techniques are inadequate for eliminating the interference of TBM equipment on radar signal propagation. This study employs a radar antenna array method for signal transmission, utilizing a wavelet double-threshold filtering algorithm and wave propagation theory to suppress clutter. These methods exhibit strong signal reception capabilities and are effective in eliminating 13.1% of the direct wave components. The adoption of a novel, efficient radar signal imaging algorithm simplifies the imaging process. Results of verification indicate that the synthetic aperture algorithm, enhanced with cross-correlation calculation, yields the optimal imaging effect. This investigation, which was conducted in conjunction with the construction of a diversion tunnel in a specific region, has confirmed the applicability of the ground penetrating radar method for the detection of water inrush in TBM tunnels by conducting a comparative analysis of the direct wave removal algorithm and the integration of the optimal imaging algorithm. The innovative application of ground penetrating radar within TBM tunnels, along with a targeted technology to mitigate signal interference from metal equipment, has led to the selection of an appropriate algorithm for both signal processing and imaging. This approach offers a novel solution for the detection of water source disasters in TBM tunnels.

Coded Excitation for Ultrasonic Testing: A Review.

Originating in the early 20th century, ultrasonic testing has found increasingly extensive applications in medicine, industry, and materials science. Achieving both a high signal-to-noise ratio and high efficiency is crucial in ultrasonic testing. The former means an increase in imaging clarity as well as the detection depth, while the latter facilitates a faster refresh of the image. It is difficult to balance these two indicators with a conventional short pulse to excite the probe, so in general handling methods, these two factors have a trade-off. To solve the above problems, coded excitation (CE) can increase the pulse duration and offers great potential to improve the signal-to-noise ratio with equivalent or even higher efficiency. In this paper, we first review the fundamentals of CE, including signal modulation, signal transmission, signal reception, pulse compression, and optimization methods. Then, we introduce the application of CE in different areas of ultrasonic testing, with a focus on industrial bulk wave single-probe detection, industrial guided wave detection, industrial bulk wave phased array detection, and medical phased array imaging. Finally, we point out the advantages as well as a few future directions of CE.

Audio signal transmission method in network-based audio analytics system

The subject matter of the article is аudio signal transmission method in network-based audio analytics system. The creation of a network-based audio analytics system leads to the emergence of new classes of load sources that transmit packetized sound data. Therefore, without constructing adequate mathematical models, it is impossible to build a well-functioning network-based audio analytics system. A fundamental question in traffic theory is the question of load source models. The development of an method for transmitting audio signals in a network-based audio analytics system becomes necessary. Based on this, the goal of the work is to create methods an method for transmitting audio signals in a network-based audio analytics system to ensure efficiency and accuracy in audio analytics. The following tasks were solved in the article: the formation of a model for the system's load sources, investigation of connection and traffic management, implementation of control and traffic monitoring functions in the network, research of methods to ensure the quality of audio signal transmission and the development of a method of transmitting an audio signal by virtual routes switching. To achieve these goals, the following methods are used: mathematical signal processing, data compression algorithms, optimization of network protocols, and the use of high-speed network connections. The obtained results include modeling of the system's load sources, examination of connection and traffic management, investigation of methods to ensure the quality of audio signal transmission and a method of transmitting an audio signal by virtual routes switching was proposed. In conclusion, the possibilities of using simulation modeling of nodes in the network-based audio analytics system are highly limited. This is explained by the fact that the acceptable level of information loss in data centers is very low. The use of the developed method enables effective control and processing of sound information in real-time. This method can find broad applications in various fields, including security, healthcare, management systems, and other industries where the analysis of audio signals is a crucial element.

Polar Codes and a M-ary Modulation-Based OFDM-PLC System

Power Line Communication (PLC) serves as a medium for communication over power lines, utilizing the existing power grid for information transmission. It offers a low-cost, highly scalable signal transmission method and has the potential to become the preferred technology for providing broadband in smart homes, offices, and smart grids. However, noise in the power line channel, especially impulse noise, seriously affects the communication quality of PLC. In this paper, we establish an OFDM-PLC system with higher-order modulation and polar codes. The higher-order QAM or APSK modulation technique is employed to increase the signal transmission rate and the system performance is analyzed. To combat the impulse noise in the PLC channel, we first model it using a superposition of multi-damping sinusoidal functions and then introduce the polar coding scheme to suppress the impulse noise in the system, thereby improving the transmission reliability. Simulation results verify that the proposed polar coding scheme based on the OFDM-PLC system can improve the Bit Error Rate (BER) performance of PLC channel transmission under impulse interference.

Sensing RISs: Enabling Dimension-Independent CSI Acquisition for Beamforming

Reconfigurable intelligent surfaces (RISs) are envisioned as a potentially transformative technology for future wireless communications. However, RISs' inability to process signals and the attendant increased channel dimension have brought new challenges to RIS-assisted systems, including significantly increased pilot overhead required for channel estimation. To address these problems, several prior contributions that enhance the hardware architecture of RISs or develop algorithms to exploit the channels' mathematical properties have been made, where the required pilot overhead is reduced to be proportional to the number of RIS elements. In this paper, we propose a dimension-independent channel state information (CSI) acquisition approach in which the required pilot overhead is independent of the number of RIS elements. Specifically, in contrast to traditional signal transmission methods, where signals from the base station (BS) and the users are transmitted in different time slots, we propose a novel method in which signals are transmitted from the BS and the user simultaneously during CSI acquisition. With this method, an electromagnetic interference random field (IRF) will be induced on the RIS, and we propose the structure of sensing RIS to capture its features. Moreover, we develop three algorithms for parameter estimation in this system, in which one of the proposed vM-EM algorithm is analyzed with the fixed-point perturbation method to obtain an asymptotic achievable bound. In addition, we also derive the Cram\'er-Rao lower bound (CRLB) and an asymptotic expression for characterizing the best possible performance of the proposed algorithms. Simulation results verify that our proposed signal transmission method and the corresponding algorithms can achieve dimension-independent CSI acquisition for beamforming.

Image sensor communication and its transmitting devices

This paper focuses on image sensor communication (ISC) using cameras to receive wireless signals transmitted by visible lights. We summarize the technical principles of ISC from the perspective of transmitting devices. An introduction to the development and applications of ISC was provided, starting with the history of image sensors and visible light communication (VLC). Moreover, the communication mechanism of ISC using complementary metal–oxide–semiconductor (CMOS) sensors is explained in this paper. Specifically, we investigate studies using an optical communication image sensor and the rolling shutter technique for high-speed ISC. Further, we highlight three distinctive transmitting devices in ISC: a LED array, rotating LEDs, and displays, and explain them in terms of structure and signal transmission methods. In particular, we present the parallel transmission of LED arrays and their application in traffic systems and introduce an optical flow-based signal transmission method using rotating LEDs. In addition, two visual transmission techniques in displays-based-ISC using brightness-difference and high-frequency flashing are introduced, respectively. This paper intuitively explains these ISC techniques and reveals ISC’s high versatility.

Proposal of terrestrial-device wake-up signal transmission method with Doppler variation pre-compensation on IoT platform via LEO satellite

Regarding the waking up of terrestrial Internet of Things devices via a low Earth orbit satellite downlink signal, it is difficult to demodulate the wake-up signal received by such devices that are directly below a satellite due to Doppler variation caused by the satellite’s high-speed movement. This letter proposes a device wake-up signal transmission method for reducing the effect of Doppler shift variation on a device’s receive signal by adding frequency variation to the wake-up signals that cancels out the Doppler variation and transmitting the signal in downlink. Computer simulations showed that the proposed method enables the waking up of devices directly below a satellite.

A Novel Remote Visualization of Screen Images Against High-Resolution Display With Divided Screens Focusing on the Difference of Transfer Function of Multiple Emanations

Electromagnetic (EM) remote visualization of screen images attacks (RVSIAs) is among the most actively researched topics in hardware security. Target displays are being developed daily; for example, recently developed high-resolution displays have multiple divided areas on the screen, and each area transmits different pixel information. In this case, it is difficult to reconstruct the screen using the conventional methods because the target screen information is leaked by multiple lines at the same frequency and timing, and multiple screen information is mixed into the EM waves. By contrast, in this article, we propose a novel RVSIA method that focuses on the difference in the transfer functions of multiple emanations from a high-resolution display. Considering the structure and signal transmission method of recent high-resolution displays, the proposed attack method observes leaked EM waves from multiple observation positions and alters the receiving frequencies of the receiver. For the first time, we have been able to separate multiple screen information contained in leaked EM waves using an independent component analysis method. In the experiments, we applied the proposed method to an actual laptop PC that divides the screen into multiple areas. As a result, it was possible to reconstruct screen information using the proposed attack method. Thus, the proposed method enables successful attacks against recent high-resolution displays. Furthermore, the measurement equipment employed remains similar to those utilized in the conventional attacks.

A Novel Optical-Based Methodology for Improving Nonlinear Fourier Transform

The increasing demand for bandwidth and long-haul transmission has led to new methods of signal processing and transmission in optical fiber communication systems. The nonlinear Fourier transform is one of the most recent methods proposed, and is able to represent an integrable nonlinear Schrödinger equation (NLSE) channel in terms of its continuous and discrete spectrum, to overcome the limitation of the bandwidth imposed by the Kerr effect on silica fibers. In this paper, we will propose and investigate the Boffetta-Osburne method for the direct nonlinear Fourier implementation, and the Gel’fand-Levitan-Marchenko equation for the inverse nonlinear Fourier, as only the continuous part of the nonlinear spectrum will be used to encode information. A novel methodology is proposed to improve their numerical implementation with respect to the NLSE, and we analyze in detail how the improved algorithm can be used in a real optical system, by investigating three different modulation schemes. We report increased performance transmission and consistency in the numerical results when the proposed methodology is applied. Our results show that b-modulation will increase the Q-factor by 2 dB with respect to the other two modulations. The improvement results with our proposed methodology suggest that b-modulation applied only to a continuous part of the nonlinear spectrum is a very effective method for maximizing both the transmission bandwidth and distance in optical fiber communication systems.

Review on Tunnel Communication Technology

Tunnels account for an increasing proportion of highways. Due to the semi-closed structure of tunnels, signal communication is difficult in tunnels. This review analyzes the signal data transmission requirements of intelligent network management systems, such as lighting systems, wind protection systems, fire protection systems, and vehicle and pedestrian positioning systems in tunnels. The selection of signal coverage and transmission methods are also discussed. The advantages and disadvantages of various networking methods are analyzed. This paper summarizes the wireless signal transmission, wired signal transmission and signal transmission modes of different tunnel types.

Flexible capacitive three-dimensional force sensor for hand motion capture and handwriting recognition

Handwriting recognition has been widely studied as an important signal transmission method in the field of human–computer interaction. Flexible capacitive three-dimensional (3D) force sensor is widely used in this field because of its high sensitivity, large dynamic response range and good mechanical stability. However, traditional flexible capacitive 3D force sensors based on the array structure usually only sense 3D force with equivalent forward pressure rather than the decoupling of real 3D force in space. Herein, we design a flexible capacitive 3D force sensor with petal-like electrode to capture various hand movements in 3D space and further decouple 3D force to 1D force along [Formula: see text], [Formula: see text] and [Formula: see text] directions. The sensor presents a high sensitivity (1.1 kPa[Formula: see text]at the pressures below 1 kPa), a fast response (63 ms) and excellent repeatability under continuous pressure. In addition, the electrode with eight-petal structure helps simplify the decoupling process of 3D force. Through handwriting test, the sensor presents good sensing performance for hand motion capture and handwriting recognition, which is expected to be applied in the field of human–computer interaction.

Synchronous Signal Transmission Method of Minimally Invasive Renal Failure Surgery Based on Nano Molecular Image Probe.

The synchronous signal transmission can promote the successful completion of minimally invasive renal failure surgery, so the synchronous signal transmission method of minimally invasive renal failure surgery based on nano molecular image probe is studied. The nanoprobe is constructed by loading different signal molecules, photosensitizers, acoustic sensitizers and thermosensitives through the method of double emulsion or film hydration; the near-infrared confocal endoscope molecular image diagnosis and treatment equipment is designed based on the nanoprobe, and the intraoperative highfrequency image is obtained through the diagnosis and treatment equipment; the high-frequency injection energy and signal synchronous transmission method is adopted, and the signal is added to the primary and secondary resonance circuit. In the coupling module, a higher frequency alternating signal is added into the resonant coupling voltage to modulate the signal into the transmission resonance system, which is transmitted from the energy transmission coupling coil to the secondary end, and the injected signal part of the coupling coil is demodulated at the other end to complete the transmission of the signal coupling transmission loop, so as to realize the high-frequency image energy and index data signal of minimally invasive renal failure surgery. The experimental results show that the designed nano molecular image probe has good stability, and the simulated signal transmission waveform is consistent with the transmission waveform of the principle analysis. Applying the proposed method to the minimally invasive surgery of renal failure, it is found that the success rate and image signal transmission efficiency of the minimally invasive surgery of patients 1-5 are higher than 99.5%, and the operation image transmission accuracy is high and the operation effect is excellent.

Flexible and Stretchable Bioelectronics.

Medical science technology has improved tremendously over the decades with the invention of robotic surgery, gene editing, immune therapy, etc. However, scientists are now recognizing the significance of ‘biological circuits’ i.e., bodily innate electrical systems for the healthy functioning of the body or for any disease conditions. Therefore, the current trend in the medical field is to understand the role of these biological circuits and exploit their advantages for therapeutic purposes. Bioelectronics, devised with these aims, work by resetting, stimulating, or blocking the electrical pathways. Bioelectronics are also used to monitor the biological cues to assess the homeostasis of the body. In a way, they bridge the gap between drug-based interventions and medical devices. With this in mind, scientists are now working towards developing flexible and stretchable miniaturized bioelectronics that can easily conform to the tissue topology, are non-toxic, elicit no immune reaction, and address the issues that drugs are unable to solve. Since the bioelectronic devices that come in contact with the body or body organs need to establish an unobstructed interface with the respective site, it is crucial that those bioelectronics are not only flexible but also stretchable for constant monitoring of the biological signals. Understanding the challenges of fabricating soft stretchable devices, we review several flexible and stretchable materials used as substrate, stretchable electrical conduits and encapsulation, design modifications for stretchability, fabrication techniques, methods of signal transmission and monitoring, and the power sources for these stretchable bioelectronics. Ultimately, these bioelectronic devices can be used for wide range of applications from skin bioelectronics and biosensing devices, to neural implants for diagnostic or therapeutic purposes.

A Network Communication Frequency Routing Protocol of Coal Mine Safety Monitoring System Based on Wireless Narrowband Data Communication Network

In recent years, the coal industry has been expanding the scale and output of coal mining in China, yet the safety in production is faced with great challenge. Communication system in coal mines plays a significant role in production safety, and wireless narrowband data communication network technology is a new-type advantageous measure to construct wireless network security monitoring system for coal mining. Here, a coal mine monitoring signal transmission method based on bus technology and wireless data transmission technology suitable for coal mines is proposed. The corresponding monitoring system is designed, and the system is able to collect the gas concentration and mechanical operation status of the mines. Wireless sensor network nodes are used for the RF communication module. The communication performance of this system in coal and rock medium and the roadway along the goaf is simulated, and the quantitative relationship between the attenuation coefficient of different communication frequencies and the effective communication distance is obtained. Hence, the results show that the protocol has good performance in terms of route establishment, maintenance, and data transmission hop count for the positioning of coal mine employees.

Problems of Powering End Devices in Wireless Networks of the Internet of Things

This article presents the problems of powering wireless sensor networks operating in the structures of the Internet of Things (IoT). This issue was discussed on the example of a universal end node in IoT technology containing RFID (Radio Frequency Identification) tags. The basic methods of signal transmission in these types of networks are discussed and their impact on the basic requirements such as range, transmission speed, low energy consumption, and the maximum number of devices that can simultaneously operate in the network. The issue of low power consumption of devices used in IoT solutions is one of the main research objects. The analysis of possible communication protocols has shown that there is a possibility of effective optimization in this area. The wide range of power sources available on the market, used in nodes of wireless sensor networks, was compared. The alternative possibilities of powering the network nodes from Energy Harvesting (EH) generators are presented.

A Method of Signal Transmission in Conditions of a High Level of Interference from a Powerful Plasma Installation

The problem of signal transmission in experimental installations is of particular importance for plasma physics due to the characteristic powerful impulse noise caused by the operation of power equipment. This article describes a filter based on a broadband in-phase transformer designed to transmit signals at the KI-1 solar plasma simulation facility of the Institute of Laser Physics, SB, RAS. The parameters of the plasma produced by exposure to a pulse of powerful CO2-laser to a solid-state target, sharply differ from the plasma parameters of confinement installations, which makes the known methods of signal transmission based on classical transformers and optocouplers unacceptable. The presence of X-rays also imposes restrictions on the use of fiber optic solutions.

Digital Communication Links Cooperating with the Analog 4-20 mA Standard for Marine Applications

Abstract The maritime industry makes a significant contribution to the globalized economy. One of the most important parts of the maritime industry is transport. Maritime transport by ships is the dominant means of transport for industrial products and food. Modern ships are increasingly automated. A characteristic feature of automation systems is the use of distributed monitoring and control systems with large distances between field devices and controllers. Among many methods of signal transmission, both in measurement and control, the dominant role in related to continuous signals is played by the two-wire 4-20 mA current standard. Despite its advantages, this standard has limitations mainly due to one-way transmission of information representing one measurement quantity. Programmable transducers are an alternative to analogue solutions. This carried out research concentrates on the full assessment of the properties of the considered methods of information transmission used so far with particular reference to the two-wire 4-20 mA standard. This assessment also takes into account the negative factors characterizing the sea-going ships, such as environmental conditions or problems resulting from the use of an isolated power grid. Additionally, a description of the available digital methods used for communication in ship automation systems will be presented. Firstly, description will be provided for HART protocol (Highway Addressable Remote Transducer), Foundation Fieldbus, Profibus PA and Modbus as communication protocols adopted by modern smart transducers as alternatives for classical analogue 4-20 mA transducers. Moreover, serial communication interfaces such as RS232, RS422 and RS485 will be discussed as means of communication between automation stations. In order to demonstrate the positive contribution for smart transmitters in measurement and control process, an experimental research has been conducted at the laboratories of Gdynia Maritime University, results of which will be discussed in detail in this article. Eventually, illustration will be provided for tank level measurement systems on a commercial ship as an example for measurement and control system mainly based on classical 4-20 mA current signal. Description will be provided for the problems associated with the system and their causes. Based on the conducted discussions, there will be recommendations of suggested solutions for such problems.