Additional Methods Research Articles

A study on the improvement and validation of analytical methods for food additives (fortifying nutrient) in Korean foods

A study on the improvement and validation of analytical methods for food additives (fortifying nutrient) in Korean foods

Assessing exit screening of SARS-CoV-2 in Japan: an analysis of the airport screening data of passengers from the United Kingdom, 2020–2022

BackgroundJapan implemented strict border control measures and all incoming passengers were subject to entry screening with reverse transcription–polymerase chain reaction or antigen testing. From late 2020, exit screening within 72 h of departure to Japan also became mandatory. In this study, we evaluated the effectiveness of the exit screening policy in Japan by analyzing airport screening data from October 2020 to April 2022.MethodsIn addition to assessing entry screening data over time of passengers from the United Kingdom, we examined the prevalence of coronavirus disease 2019 (COVID-19) in the United Kingdom based on the Office of National Statistics infection survey. We constructed a statistical model that described entry screening positivity over time using Office of National Statistics prevalence data as the explanatory variable. Ideally, the time-dependent patterns of entry screening and Office of National Statistics prevalence data should resemble each other; however, we found that, sometimes, they were different and regarded the difference to statistically partly reflect the effectiveness of exit screening.ResultsThe average proportion positive in one month before mandatory exit screening was implemented among Japanese passengers was 0.67% (95% confidence interval [CI]: 0.45, 0.98), whereas the proportion positive decreased to 0.49% (95% CI: 0.21, 1.15) in the first month of exit screening. Adjusting for time-dependent prevalence at the origin, we concluded that exit screening contributed to reducing passenger positivity by 59.3% (95% CI: 19.6, 81.3). The overall positivity values among passengers during the Delta and Omicron variant periods were 3.46 times and 1.46 times that during the pre-Delta variant period, respectively.ConclusionsWe used a simplistic statistical model and empirical data from passengers arriving in Japan from the United Kingdom to support that exit screening helped to reduce the proportion positive by 59%. Although the proportion positive later increased considerably and precluded preventing the introduction of imported cases, submitting a certificate for a negative test result contributed to reducing the positivity among travelers.

Adaptation of Conductometric Monoenzyme Biosensor for Rapid Quantitative Analysis of L-arginine in Dietary Supplements.

The present study reports on the development, adaptation, and optimization of a novel monoenzyme conductometric biosensor based on a recombinant arginine deiminase (ADI) for the determination of arginine in dietary supplements with a high accuracy of results. Aiming for the highly sensitive determination of arginine in real samples, we studied the effect of parameters of the working buffer solution (its pH, buffer capacity, ionic strength, temperature, and protein concentration) on the sensitivity of the biosensor to arginine. Thus, it was determined that the optimal buffer is a 5 mM phosphate buffer solution with pH 6.2, and the optimal temperature is 39.5 °C. The linear functioning range is 2.5-750 µM of L-arginine with a minimal limit of detection of 2 µM. The concentration of arginine in food additive samples was determined using the developed ADI-based biosensor. Based on the obtained results, the most effective method of biosensor analysis using the method of standard additions was chosen. It was also checked how the reproducibility of the biosensor changes during the analysis of pharmaceutical samples. The results of the determination of arginine in real samples using a conductometric biosensor based on ADI clearly correlated with the data obtained using the method of ion-exchange chromatography and enzymatic spectrophotometric analysis. We concluded that the developed biosensor would be effective for the accurate and selective determination of arginine in dietary supplements intended for the prevention and/or elimination of arginine deficiency.

Addition of a metoclopramide constant rate infusion to prevent ptyalism, regurgitation and vomiting in brachycephalic dogs undergoing spinal surgery

ObjectiveTo assess whether adding metoclopramide to a protocol of maropitant and pantoprazole would reduce incidence of ptyalism, vomiting and regurgitation in brachycephalic dogs undergoing thoracolumbar spinal surgery. Study designRandomized blinded controlled trial. AnimalsA total of 43 brachycephalic dogs undergoing thoracolumbar spinal surgery. MethodsIn addition to a standardized anaesthetic regimen, dogs were randomized to be administered either a 2 mg kg–1 day–1 metoclopramide constant rate infusion (CRI) or a saline solution at an equivalent infusion rate, started after anaesthetic induction and discontinued 5 hours after tracheal extubation. The presence of vomiting, regurgitation and pytalism, and short form of the Glasgow Composite Pain Scale pain scores were assessed by a blinded observer hourly for 4 hours, starting 1 hour postextubation. ResultsRegurgitation occurred in six dogs postoperatively; three dogs were in the placebo group and three in the metoclopramide group. The odds ratio (OR) of regurgitation after surgery did not differ between groups [OR: 0.76, 95% confidence interval (CI): 0.13–4.3, p = 0.76]. The odds of observing ptyalism at 3 and 4 hours was approximately 15 times less than 1 hour postoperatively (both OR: 15.4, 95% CI: 1.8–130.7, p = 0.012) and did not differ based on the addition of metoclopramide (OR: 0.73, 95% CI: 0.07–8.0, p = 0.79). The odds of observing pain did not change over time and did not differ based on the addition of metoclopramide (OR: 0.71, 95% CI: 0.12–4.2, p = 0.71). Vomiting did not occur during the study (0.0%, 95% CI: 0.0–8.2%). No adverse effects were observed during the study period in either group. Conclusions and clinical relevanceThe addition of a metoclopramide CRI to maropitant and pantoprazole did not result in a significant reduction in ptyalism or regurgitation in brachycephalic dogs undergoing thoracolumbar spinal surgery.

A single fast Hebbian-like process enabling one-shot class addition in deep neural networks without backbone modification.

One-shot learning, the ability to learn a new concept from a single instance, is a distinctive brain function that has garnered substantial interest in machine learning. While modeling physiological mechanisms poses challenges, advancements in artificial neural networks have led to performances in specific tasks that rival human capabilities. Proposing one-shot learning methods with these advancements, especially those involving simple mechanisms, not only enhance technological development but also contribute to neuroscience by proposing functionally valid hypotheses. Among the simplest methods for one-shot class addition with deep learning image classifiers is "weight imprinting," which uses neural activity from a new class image data as the corresponding new synaptic weights. Despite its simplicity, its relevance to neuroscience is ambiguous, and it often interferes with original image classification, which is a significant drawback in practical applications. This study introduces a novel interpretation where a part of the weight imprinting process aligns with the Hebbian rule. We show that a single Hebbian-like process enables pre-trained deep learning image classifiers to perform one-shot class addition without any modification to the original classifier's backbone. Using non-parametric normalization to mimic brain's fast Hebbian plasticity significantly reduces the interference observed in previous methods. Our method is one of the simplest and most practical for one-shot class addition tasks, and its reliance on a single fast Hebbian-like process contributes valuable insights to neuroscience hypotheses.

The potential of the Mediterranean diet to improve metabolic control and body composition in youths with Type 1 Diabetes Mellitus

BackgroundA chronic autoimmune disease with an increasing incidence rate, type 1 diabetes mellitus (T1DM) is typified by the degeneration of the pancreatic beta cells. Diabetes management is significantly impacted by nutrition. Although it has been demonstrated that following the Mediterranean diet (MD) improves metabolic control with type 2 diabetes in children and adults, its effects on children with T1DM have not received much attention.ObjectiveTherefore, the purpose of this study was to assess whether adherence to Mediterranean diet is associated with better metabolic control and body composition in youths with Type 1 Diabetes Mellitus. The study recruited T1DM patients aged 6-18 years at İstanbul University Cerrahpaşa Medical Faculty Hospital's Pediatric Endocrinology and Diabetes Outpatient Clinic for follow-up.MethodsIn addition to demographic variables, some anthropometric measurements, body composition and biochemical parameters such as: Trygliceride(TG), Total cholesterol (TC), High density lipoprotein cholesterol (HDL-C), Low density lipoprotein cholesterol (LDL-C), (Aspartate aminotransferase) AST, Alanine transaminase (ALT) and glycated hemoglobin (HbA1c) was analyzed. The time in range (TIR) is a value obtained from continuous glucose monitoring. KIDMED was used to assess the participants' adherence with the MD.ResultsGood adherence to the MD resulted in much larger height SDS than poor adherence. Poor adherence to MD resulted in higher body fat than moderate and good adherence.There is positivite correlation between TIR and KIDMED score. Adherence to MD is negatively associated with HbA1c. The regression anaylsis showed that a one-point rise in the KIDMED score would result in a 0.314-unit reduction in the HbA1c value (p < 0.01).ConclusionsIn conclusion, this study found that adhering to MD led to improved anthropometric measurements, biochemistry, and diabetes outcomes. Awareness among children, adolescents with T1DM, and their parents about the benefits of MD compliance for glycemic and metabolic control should be raised.

Supplemental effects of different production methods of pine needle additives on growth performance, intestinal environment, meat quality and serum of broiler chickens.

Pine needles are rich in many nutrients and exhibit antibacterial and antioxidant biological activities; however, the effects of different production methods of pine needle additives on the growth performance and intestinal flora of broiler chickens are not known. Normal diets were supplemented with pine needle fermentation juice (PNF), pine needle soaking juice (PNS), or pine needle powder (PNP), and the associated effects on growth performance, relative organ weights, intestinal development, intestinal histological morphology, intestinal flora, meat quality, and serum indicators in broiler chickens were observed. The results showed that PNF, PNS, and PNP all significantly improved feed utilisation and promoted the growth and development of broilers. All three additives also significantly improved the structure of the intestinal flora, specifically increasing the diversity of bacteria; increasing the abundance of beneficial bacteria, such as Faecalibacterium, Rikenella, and Blautia; and decreasing the abundance of harmful bacteria, such as Staphylococcus. The antioxidant properties of pine needles were also found to intensify lipid metabolic reactions in the blood, thus leading to lower triglycerides and total cholesterol. Meanwhile, high doses of PNF reduced jejunum and ileum weights and also increased meat yellowness. Lastly, none of PNF, PNS, or PNP had an effect on relative organ weights or intestinal histological morphology. The addition of pine needles to the diet of broiler chickens can effectively promote their growth performance as well as improve their intestinal flora and serum status without side effects; in particular, the dose of 0.2% of either PNF and PNS is expected to have the capacity to replace growth-promoting antibiotics as diet additives.

Synthesis of Molecularly Imprinted Polymers for Selective Extraction Followed by Solid Phase Determination of Metformin in Pharmaceutical Preparation and in Human Serum

يوضح هذا البحث تحضير وتخزين البوليمرات الجزيئية المطبوعة (MIP) في درجة حرارة الغرفة عن طريق البلمرة الصلدة لـ (Metformin (Met والتي تتميز بالحساسية العالية والتكلفة المنخفضة والاستقرار العالي. اذ تم أخذ نسب 0.8: 4: 20 ملي مول للقالب ، و للمونومر ولعوامل الربط المتصالب للبلمرة من أجل ضمان قدرة امتزاز مناسبة. المونومر الوظيفي الستايرين C8H8 تم ربطه مع إيثيلين جليكول ثنائي ميثاكريلات EGDMA C10H14O4 رابط التشابك وبالتالي إنشاء MIP لـ Metformin كـ Met-MIP تم تمييزه باستخدام مقياس الطيف الضوئي UV-VIS عند 236 نانومتر في الادوية الصيدلانية ومصل الانسان ، والتحليل الطيفي بالأشعة تحت الحمراء والمسح المجهري الإلكتروني للطبعة الدوائية. أنشأت عملية الشطف التي تم تطبيقها على القالب اي انتزاع القالب ال Met من Met-MIP تجاويف ناتجة عن استخدام المذيب المكون للفجوات المكون من الميثانول والكلوروفورم وحمض الخليك (10:20:70) مللترعلى التوالي. كانت السعة القصوى للامتزاز Met-MIP هي 1.2320 ، 2.4448 ميكرو مول / غم عند استخدام وزن 0.1 و0.2 غم من Met-MIP على التوالي. استخدمت سرنجة الطور الصلب (SPE) المعبأة ببوليمرات مطبوعة جزيئيًا (MIPs) للفصل الانتقائي والتركيز للميتفورمين في العديد من الأدوية الصيدلانية من عدة مصادر. اعتمد المصل البشري على استخدام الماء منزوع الأيونات لتخفيف المصل ، يليه تسخين المصل مع الميثانول ، ثم اضافة بضع قطرات من حمض الهيدروكلوريك 1M للحصول على محلول رائق ليتم الكشف عن الميتفورمين في منطقة الأشعة فوق البنفسجية عند طول موجي 236 نانومتر من خلال تطبيق طريقة الإضافة القياسية.

Quantitative analysis of the illegal addition of Atenolol in Panax notoginseng based on NIR-MIR spectral data fusion and calibration transfer.

To address the issue of the common illegal addition of Atenolol in Panax notoginseng, we propose an approach that realizes multivariate calibration transfer between different particle sizes based on near-infrared (NIR) and mid-infrared (MIR) spectral data fusion. To achieve high prediction accuracy, we construct three data fusion schemes (full-spectrum fusion, feature-level fusion, and decision-level fusion) that combine NIR and MIR spectral data. Among three data fusion schemes, the feature-level fusion based on the UVE-SPA-PLS model for 120-mesh spectral data achieves optimal prediction accuracy. Here, a Piecewise Direct Standardization (PDS) algorithm has been applied to calibration transfer from 100-mesh and 80-mesh to 120-mesh to reduce the influence of particle size and improve the robustness of the model. The correlation coefficient (R2) of 100-mesh, and 80-mesh prediction sets can reach 0.9861 and 0.9823, respectively. The corresponding root mean square error (RMSE) are 0.1545 and 0.2045, respectively. This research provides a method for illegal additions in precious herbs and reduces the effect of particle size on spectral modeling, enabling high-precision quantitative detection. In addition, it has important application prospects in reducing experimental losses of precious medicinal materials and ensuring the safe use of Chinese and Western medicines, which provides an alternative method for non-destructive testing.

Effect of graft sizing in valve-sparing aortic root replacement for bicuspid aortic valve: The Goldilocks ratio

ObjectiveTo investigate the effect of graft sizing on valve performance in valve-sparing aortic root replacement for bicuspid aortic valve. MethodsIn addition to a diseased control model, 3 representative groups—free-edge length to aortic/graft diameter (FELAD) ratio <1.3, 1.5 to 1.64, and >1.7—were replicated in explanted porcine aortic roots (n = 3) using straight grafts sized respective to the native free-edge length. They were run on a validated ex vivo univentricular system under physiological parameters for 20 cycles. All groups were tested within the same aortic root to minimize inter-root differences. Outcomes included transvalvular gradient, regurgitation fraction, and orifice area. Linear mixed effects model and pairwise comparisons were employed to compare outcomes across groups. ResultsThe diseased control had mean transvalvular gradient 10.9 ± 6.30 mm Hg, regurgitation fraction 32.5 ± 4.91%, and orifice area 1.52 ± 0.12 cm2. In ex vivo analysis, all repair groups had improved regurgitation compared with control (P < .001). FELAD <1.3 had the greatest amount of regurgitation among the repair groups (P < .001) and 1.5-1.64 the least (P < .001). FELAD <1.3 and >1.7 exhibited greater mean gradient compared with both control and 1.5 to 1.64 (P < .001). Among the repair groups, 1.5 to 1.64 had the largest orifice area, and >1.7 the smallest (P < .001). ConclusionsFor a symmetric bicuspid aortic valve, performance after valve-sparing aortic root replacement shows a bimodal distribution across graft size. As the FELAD ratio departs from 1.5 to 1.64 in either direction, significant increases in transvalvular gradient are observed. FELAD <1.3 may also result in suboptimal improvement of baseline regurgitation.

Microscale Structure Additive Manufacturing Control Method Using Localized Electrochemical Deposition

Micro‐nano scale 3D printing is attracting attention as an alternative manufacturing method for a variety of applications in electronic information, biomedical, and sensing devices. Localized electrochemical deposition (LECD) based on nanopipettes is naturally superior and economical for the manufacturing of high‐freedom, impurity‐free metal conductors. However, flexible printing sacrifices roughness and straightness. Therefore, the present study initially establishes a simulation model for LECD and subsequently analyzes the key factors that influence the quality and stability of the deposited structure. Furthermore, an effective solution is proposed to enhance the surface quality. Second, a constant deposition current control method based on fuzzy proportional–intergral–derivaite (PID) is proposed to effectively suppress the fluctuation and improve the stability and quality of the deposited structure. Finally, compared with the open‐loop control method, the proposed constant current control method can reduce the radial fluctuation of the copper pillar structure by 87%, and effectively improve the surface quality of the structure. The proposed method provides a new idea to carry out LCED‐based 3D printing with high resolution at the micro‐nano scale.

Contemporary Imaging Assessment of Strictures and Fibrosis in Crohn Disease, With Focus on Quantitative Biomarkers: From the AJR Special Series on Imaging of Fibrosis.

Patients with Crohn disease commonly have bowel strictures develop, which exhibit varying degrees of inflammation and fibrosis. Differentiation of the distinct inflammatory and fibrotic components of strictures is key for the optimization of therapeutic management and for the development of antifibrotic drugs. Cross-sectional imaging techniques, including ultrasound, CT, and MRI, allow evaluation of the full thickness of the bowel wall as well as extramural complications and associated mesenteric abnormalities. Although promising data have been reported for a range of novel imaging biomarkers for detection of fibrosis and quantification of the degree of fibrosis, these biomarkers lack sufficient validation and standardization for clinical use. Additional methods, including PET with emerging radiotracers, artificial intelligence, and radiomics, are also under investigation for stricture characterization. In this review, we highlight the clinical relevance of identifying fibrosis in Crohn disease, review the histopathologic aspects of strictures in Crohn disease, summarize the morphologic imaging findings of strictures, and explore contemporary developments in the use of cross-sectional imaging techniques for detecting and characterizing intestinal strictures, with attention given to emerging quantitative biomarkers.

طريقة القياس الطيفي المتزامن لتقدير كل من سيبروفلوكساسين وسيفاليكسين باستخدام طريقة H - point للاضافة المعيارية

طريقة سهلة وبسيطة ودقيقة لتقدير السبروفلوكساسين في وجود السيفاليكسين او العكس بالعكس في خليط منهما. طبقت الطريقة المقترحة بطريقة الاضافة القياسية لنقطة بنجاح في تقدير السبروفلوكساسين بوجود السيفاليكسين كمتداخل عند الاطوال الموجية 240-272.3 نانوميتر وبتراكيز مختلفة من السبروفلوكساسين 4-18 مايكروغرام . مل-1 وكذلك تقدير السيفاليكسين بوجود السبروفلوكساسين الذي يتداخل باطوال موجية 262-285.7 نانوميتر وبتراكيز مختلفة من السيفاليكسين 6-18 مايكروغرام . مل-1 في مزيج لهما. اظهرت النتائج عدم وجود اي تداخلات من قبل المواد المضافة التي تحتويها الادوية على هذه المركبات وضمن حدود كشف السبروفلوكساسين يساوي 0.1732 مايكروغرام . مل-1 وعقارالسيفاليكسين يساوي 0.4620 مايكروغرام . مل-1 . الانحراف القياسي النسبي المئوي اقل من 2% . تم تطبيق الطريقة بنجاح لتقدير العقارين في بعض المستحضرات الصيدلانية. تعتبر الطريقة المقترحة من الطرق القليلة التكلفة وعدم حاجتها الى ادخال الادوية في سلسلة من التفاعلات وتثبيت لظروف التفاعل لغرض تقديرها وانما تتم عن طريق تقدير الدواء بعد اذابته مباشرة في الماء المقطر بوجود العقار الاخر معه في مزيج وتعتبر من الطرق الناجحة في التقدير خاصة للادوية المتقاربة في طيف الامتصاص لها والتي من غير الممكن ايجاد طرق لفصل الدوائين وتقديرهما بصورة ادق من هذه الطريقة المقترحة دون التداخل وتاثير احدهما على الاخر. الطريقة المقترحة في هذا البحث كانت ناجحة في تقدير كل من السبروفلوكساسين والسيفاليكسين في مزيج لهما دون تداخل دواء مع الاخر.

Modelling and characterization of novel honeycomb structures with mass gradient produced by additive manufacturing

The dissemination of additive manufacturing methods has facilitated the design and production of complex structures which have a high strength-to-weight ratio. Cellular materials such as honeycombs have low-weight and high capacity to absorb energy which makes them desirable for the aerospace and automotive industries. The present work covers the study and comparison of metal-based regular honeycombs and functionally graded honeycombs. The latter encompass radial and linear/longitudinal gradients. Three repeating unit cells were studied: regular hexagons, Plateau and lotus. The structures were produced in aluminium using the laser powder bed fusion technique. Selected samples were submitted to a stress-relieving heat treatment. Numerical and experimental methods were used to assess the in-plane compressive properties. Finite element analysis was used to obtain the simulated force–displacement curves of each structure, allowing for the calculation of specific stiffness, absorbed energy and yield strength. The experimental method consisted of the compression of three specimens of three types of regular structures with and without stress-relieving heat treatment. The heat treatment reduced the yield strength and stiffness whilst increasing the ductility of the samples. The mechanical behaviour of the structures was found to depend upon a combined effect of the type of gradient, relative density, and unit cell structure. The results showed that an increase in the relative density would enhance the specific mechanical properties. The lotus configuration displayed the highest specific mechanical properties, as its geometry reduces the stress concentrations. The numerical results showed a reasonable match with the experimental results.

Collective patients’ rights in Polish law. Selected problems

The subject of the analysis in this publication is the problem of patients’ collective rights. In an attempt to find an answer to the questions concerning the essence of these rights and the relation between legal protection against violations of these rights and the protection against violations of individual rights of patients, the analysis covers the legal solutions in the field of patients’ rights in force in Poland, as well as the related literature and administrative court decisions. In this way, it was established that Polish legislation recognises the collective rights of patients understood as the rights of actual and potential patients treated as a collective, i.e. a group that deserves special protection, and establishes an additional method of their protection by way of administration, in which the object of protection is a collective interest (proceedings on practices violating collective patients’ rights before the Patient’s Rights Ombudsman), while some legislation recognises the right to collective patient involvement.

Seed Morphological Analysis in Species of Vitis and Relatives

Seed shape descriptions of species of Vitis have traditionally been based on adjectives comparing overall shape with geometric figures, such as oval, elongated oval, and pear-shaped, corresponding to higher values of the Stummer index (lower aspect ratio) for oval, and lower values of the Stummer index for pear shape (or elongated seeds, with a higher aspect ratio). Analytical, quantitative descriptions of shape have recently been applied to diverse genera of Vitaceae and cultivated varieties of Vitis. Here, we present the application of three quantitative methods to the seed shape description of ten species of the genus Vitis and three species of related genera (Ampelopsis, Cissus and Parthenocissus). First, general seed shape was described through comparisons using geometric models. For this, the average silhouettes of representative seed populations were used as models for shape quantification. Two additional quantitative methods were based on the measurement of bilateral symmetry and curvature analysis in the apex. Quantitative methods for shape description based on similarity with the models give an accurate account of the relationships between Vitis species. The resulting dendrogram is like the dendrogram obtained from a combined analysis using the data from general measurements and curvature and symmetry analyses. The original methods presented here for seed morphology are useful for analyzing the phylogenetic relationships between species of Vitis.

Hygienic efficiency of ultraviolet disinfection of water in centralized drinking and household water supply systems (systematic review)

Introduction. Drinking water supplied to the population must be safe in epidemic terms. However, some viruses and parasites are resistant to the disinfecting effect of traditionally used agents for water treatment. The use of UV irradiation ensures the microbiological safety of water, but there are factors affecting its effectiveness. &#x0D; The purpose of the review was to systematize scientific data on the effectiveness of the use of UV irradiation in relation to drinking water.&#x0D; Materials and methods. The search for scientific publications was carried out using literature databases MedLine/PubMed, Scopus, and Science Direct. The total number of publications was one thousand six hundred forty-six. The criteria for including the report in the systematic review were: publications in Russian or English with an available full-text version; samples for the study are water from centralized water supply systems or specially prepared microorganisms; any type of research evaluating the effectiveness of a wide range of doses of UV irradiation against microorganisms.&#x0D; Results of the analysis of publications. A systematic review included 17 reports about the effect of UV irradiation on bacteria and viruses. The subject of several studies was the resistance of protozoan cysts and helminth eggs to different doses of UV irradiation. According to the results presented in the publication, pathogenic viruses and bacteria, giardia cysts possess of the least resistance to UV irradiation (100% inactivation). 4 log-inactivation was established for Mycobacteia. E. coli and coliphages demonstrate a wide range of indicators of the resistance to ultraviolet radiation due to the diversity of the studied strains. &#x0D; Conclusion. UV disinfection should be used as an additional method in combination with traditional reagents methods of water treatment. It is necessary to study the effect of UV irradiation on helminth eggs and protozoan cysts.

Clinical utility of multiplex PCR in the detection of pathogens from sterile body fluids.

The identification of pathogens in normally sterile body fluid (NSBF) is performed using routine culture, the current gold standard. Limitations of this method include sensitivity and increased turnaround times which could potentially delay vital patient care, especially antimicrobial therapy. Adaptations of NSBF in blood culture bottles prompted us to consider the utility of additional methods to bridge the gap in diagnostic challenges for these life-threatening infections. Multiplex molecular panels have been manufactured for use with multiple specimen types including blood, cerebral spinal fluid, stool, and respiratory. Therefore, the purpose of this study was to evaluate the off-label use of ePlex Blood Culture Identification Panels on positive body fluids grown in blood culture bottles for the detection of microorganisms for research purposes.

Efforts to Improve Ship Main Engine Efficiency and Ensure Its Safety

Efforts to improve ship main engine efficiency and ensure its safety have been ongoing endeavors in the maritime industry, driven by the dual imperatives of economic competitiveness and environmental sustainability. The main engine of a ship serves as its heart, propelling it through the vast expanses of the world's oceans while consuming significant quantities of fuel. Therefore, enhancing its efficiency directly impacts operational costs and reduces the environmental footprint associated with maritime transport. One primary focus of improving main engine efficiency lies in the advancement of engine design and technology. Over the years, there has been a concerted effort to develop engines that offer higher power output while consuming less fuel. This has led to the emergence of more efficient engine designs, such as slow-speed two-stroke engines and high-pressure, common-rail fuel injection systems. These innovations optimize fuel combustion, minimize energy losses, and enhance overall propulsion efficiency. Moreover, ongoing research and development efforts are aimed at harnessing alternative fuels and propulsion technologies to further enhance efficiency and reduce environmental impact. LNG (liquefied natural gas) has gained traction as a cleaner-burning fuel alternative, offering significant reductions in sulfur oxides (SOx) and nitrogen oxides (NOx) emissions compared to traditional marine fuels. Additionally, the exploration of hybrid and electric propulsion systems holds promise for reducing greenhouse gas emissions and improving overall energy efficiency. Ensuring the safety of ship main engines is paramount to the reliability and operability of vessels at sea. A robust maintenance regimen is essential to identify and address potential issues before they escalate into costly failures or pose safety hazards. Routine inspections, preventive maintenance, and condition monitoring play crucial roles in detecting abnormalities, wear, and tear, allowing for timely interventions and repairs. Furthermore, advancements in predictive maintenance technologies, such as remote monitoring systems and data analytics, enable real-time assessment of engine performance and early detection of potential malfunctions. The ARAS method lacks the capability to handle ambiguity, subjective judgments, and coping with incomplete information. It relies on unbiased good judgment to address uncertainty, particularly in unknown and complex conditions, making it a valuable approach. The method provides options for sequencing and analysis based on facts and special cases, allowing selectors to express both optimistic and rational attitudes. While it appears numerical on paper, it offers the flexibility to create e-learning pathways tailored to individual needs, emphasizing the importance of mastery. The proposed integrated software for this method is both cost-effective and validated for suitability, ensuring its practical application. Advanced Engine Designs, Improved Monitoring and Maintenance, Enhanced Fuel Management, Innovative Propulsion Technologies, Automation and Remote Monitoring and Advanced Materials and Coatings. the Rank Efforts to improve ship Main Engine efficiency and Ensure its safety for Additive Ratio Assessment method. Advanced Materials and Coatings is showing the highest rank and Advanced Engine Designs is showing the lowest rank. Fuel Efficiency Improvement, Emissions Reduction, Reliability and Maintenance Costs and Safety Performance.

The Emerging Star of Carbon Luminescent Materials: Exploring the Mysteries of the Nanolight of Carbon Dots for Optoelectronic Applications.

Carbon dots (CDs), a class of carbon-based nanomaterials with dimensions less than 10nm, have attracted significant interest since their discovery. They possess numerous excellent properties, such as tunability of photoluminescence, environmental friendliness, low cost, and multifunctional applications. Recently, a large number of reviews have emerged that provide overviews of their synthesis, properties, applications, and their composite functionalization. The application of CDs in the field of optoelectronics has also seen unprecedented development due to their excellent optical properties, but reviews of them in this field are relatively rare. With the idea of deepening and broadening the understanding of the applications of CDs in the field of optoelectronics, this review for the first time provides a detailed summary of their applications in the field of luminescent solar concentrators (LSCs), light-emitting diodes (LEDs), solar cells, and photodetectors. In addition, the definition, categories, and synthesis methods of CDs are briefly introduced. It is hoped that this review can bring scholars more and deeper understanding in the field of optoelectronic applications of CDs to further promote the practical applications of CDs.