Methacryloyl Groups Research Articles

Extracellular matrix-mimicking cryogels composed of methacrylated fucoidan enhance vascularized skeletal muscle regeneration following volumetric muscle loss

Volumetric muscle loss (VML) significantly impairs the inherent regenerative ability of skeletal muscle and results in chronic functional impairment. Polysaccharides in the muscle extracellular matrix are crucial for regulating cell proliferation and differentiation. Recent studies indicate that fucoidan has beneficial effects on musculoskeletal conditions. However, the impact of fucoidan on skeletal muscle regeneration remains poorly understood. In this study, methacrylated fucoidan (FuMA) was synthesized through chemical grafting of the methacryloyl group onto fucoidan. In vitro experiments demonstrated that treatment with FuMA significantly up-regulated the expression of myogenic markers and promoted the formation of myotubes in C2C12 myoblast cells. Importantly, FuMA treatment led to a significant enhancement in mitochondrial energy metabolism of myoblasts via activation of the NRF2 antioxidant signaling pathway. To further investigate the regenerative properties in repairing skeletal muscle defects, we fabricated a dual crosslinked cryogel consisting of FuMA and methacrylated gelatin (GelMA) with a porous and interconnected structure. In a rat tibialis anterior muscle VML model, implantation of the FuMA/GelMA cryogel effectively promoted the regeneration of muscle fibers, reduced collagen deposition, and facilitated the formation of new blood vessels. Hence, polysaccharide-based cryogels represent a promising implantable biomimetic scaffold for facilitating skeletal muscle regeneration following severe injuries.

Functionalisation of chitosan with methacryloyl and crotonoyl groups as a strategy to enhance its mucoadhesive properties

Mucoadhesive polymers are crucial for prolonging drug retention on mucosal surfaces. This study focuses on synthesising and characterising novel derivatives by reacting chitosan with crotonic and methacrylic anhydrides. The structure of the resulting derivatives was confirmed using proton-nuclear magnetic resonance spectroscopy and Fourier-transform infrared spectroscopy. It was established that the degree of substitution plays a crucial role in the pH-dependent solubility profiles and electrophoretic mobility of the chitosan derivatives. Spray-drying chitosan solutions enabled preparation of microparticles, whose mucoadhesive properties were evaluated using fluorescence flow-through studies and tensile test, demonstrating improved retention on sheep nasal mucosa for modified derivatives. Acute toxicity studies conducted in vivo using planaria and in vitro using MTT assay with the Caco-2 cell line, a model of the mucosal epithelium in vitro, showed that the novel derivatives are not cytotoxic. These findings emphasise the potential of tailored chitosan chemical modifications for enhancing transmucosal drug delivery.

Designing methacrylic anhydride-based hydrogels for 3D bioprinting

Methacrylic anhydride-based hydrogels, derived by introducing methacryloyl groups to various polymer side chains, are promising bioinks for 3D printing in medical applications. These hydrogels combine the inherent biocompatibility and therapeutic benefits of their parent polymers with the unique photocrosslinking properties conferred by the methacryloyl groups, allowing the precise control over their mechanical properties through light-curing parameters. Using three-dimensional (3D) biological compression, these hydrogels serve as bioinks for producing scaffolds with optimal porosity, facilitating cell adhesion, proliferation, and differentiation. This technology enables the precise spatial distribution of bioactive substances, offering targeted therapeutic treatment and controlled release. This review delved into recent advancements in bioprinting technologies, outlined the preparation of methacrylic anhydride-based bioinks, and summarized factors influencing the resulting biological and mechanical properties of bioscaffolds. Additionally, the properties and applications of methylpropionic anhydride-based hydrogels in various medical fields were discussed, addressing current limitations and future challenges in integrating these hydrogels with 3D bioprinting for clinical applications.

Development of a Human Recombinant Collagen for Vat Polymerization-Based Bioprinting.

In light-based 3D-bioprinting, gelatin methacrylate (GelMA) is one of the most widely used materials, as it supports cell attachment, and shows good biocompatibility and degradability in vivo. However, as an animal-derived material, it also causes safety concerns when used in medical applications. Gelatin is a partial hydrolysate of collagen, containing high amounts of hydroxyproline. This causes the material to form a thermally induced gel at ambient temperatures, a behavior also observed in GelMA. This temperature-dependent gelation requires precise temperature control during the bioprinting process to prevent the gelation of the material. To avoid safety concerns associated with animal-derived materials and reduce potential issues caused by thermal gelation, a recombinant human alpha-1 collagen I fragment was expressed in Komagataella phaffii without hydroxylation. The resulting protein was successfully modified with methacryloyl groups and underwent rapid photopolymerization upon ultraviolet light exposure. The developed material exhibited slightly slower polymerization and lower storage modulus compared to GelMA, while it showed higher stretchability. However, unlike the latter, the material did not undergo physical gelation at ambient temperatures, but only when cooled down to below 10°C, a characteristic that has not been described for comparable materials so far. This gelation was not caused by the formation of triple-helical structures, as shown by the absence of the characteristic peak at 220nm in CD spectra. Moreover, the developed recombinant material facilitated cell adherence with high cell viability after crosslinking via light to a 3D structure. Furthermore, desired geometries could be easily printed on a stereolithographic bioprinter.

Digital Light Processing of Thermoresponsive Hydrogels from Polyproline-Based Star Polypeptides.

The first report of star poly(L-proline) crosslinkers is disclosed for digital light processing 3D printing of thermoresponsive hydrogels. Through chain end functionalization of star poly(L-proline)s with methacryloyl groups, access to high-resolution defined 3D hydrogel structures via digital light processing is achieved through photoinitiated free radical polymerization. Changing the poly(L-proline) molecular weight has a direct influence on both thermoresponsiveness and printability, while shape-morphing behavior can be induced thermally.

Human Chorionic Membrane-derived Tunable Hydrogels for Vascular Tissue Engineering Strategies.

One of the foremost targets in the advancement of biomaterials to engineer vascularized tissues is not only to replicate the composition of the intended tissue but also to create thicker structures incorporating a vascular network for adequate nutrients and oxygen supply. For the first time, to the best of current knowledge, a clinically relevant biomaterial is developed, demonstrating that hydrogels made from the human decellularized extracellular matrix can exhibit robust mechanical properties (in the kPa range) and angiogenic capabilities simultaneously. These properties enable the culture and organization of human umbilical vein endothelial cells into tubular structures, maintaining their integrity for 14 days in vitro without the need for additional polymers or angiogenesis-related factors. This is achieved by repurposing the placenta chorionic membrane (CM), a medical waste with an exceptional biochemical composition, into a valuable resource for bioengineering purposes. After decellularization, the CM underwent chemical modification with methacryloyl groups, giving rise to methacrylated CM (CMMA). CMMA preserved key proteins, as well as glycosaminoglycans. The resulting hydrogels rapidly photopolymerize and have enhanced strength and customizable mechanical properties. Furthermore, they demonstrate angio-vasculogenic competence in vitro and in vivo, holding significant promise as a humanized platform for the engineering of vascularized tissues.

Aqueous RAFT Dispersion Polymerization Mediated by an ω,ω-Macromolecular Chain Transfer Monomer: An Efficient Approach for Amphiphilic Branched Block Copolymers and the Assemblies.

Herein, an ω,ω-macromolecular chain transfer monomer (macro-CTM) containing a RAFT (reversible addition-fragmentation chain transfer) group and a methacryloyl group was synthesized and used to mediate photoinitiated RAFT dispersion polymerization of hydroxypropyl methacrylate (HPMA) in water. The macro-CTM undergoes a self-condensing vinyl polymerization (SCVP) mechanism under RAFT dispersion polymerization conditions, leading to the formation of amphiphilic branched block copolymers and the assemblies. Compared with RAFT solution polymerization, it was found that the SCVP process was promoted under RAFT dispersion polymerization conditions. Morphologies of branched block copolymer assemblies could be controlled by varying the monomer concentration and the [HPMA]/[macro-CTM] ratio. The branched block copolymer vesicles could be used as seeds for seeded RAFT emulsion polymerization, and framboidal vesicles were successfully obtained. Finally, degrees of branching of branched block copolymers could be further controlled by using a binary mixture of the macro-CTM and a linear macro-RAFT agent or a small molecule CTM. We believe that this study not only provides a versatile strategy for the preparation of branched block copolymer assemblies but also offers important insights into polymer synthesis via heterogeneous RAFT polymerization.

An in situ forming gelatin-based hydrogel loaded with soluble amniotic membrane promotes full-thickness wound regeneration in rats.

Early effective treatment and appropriate coverage are vital for full-thickness wounds. Amnion membrane-derived products have recently emerged in tissue engineering. However, the optimal concentration, carrier for controlled release, and handling have remained challenges. This study aims to develop and optimize an in situ forming, amniotic-based hydrogel for wound healing. Here, a composite matrix was fabricated with gelatin hydrogel modified with methacrylate functional group conjugated (GelMA) and keratose (wt.1%), loaded with mesenchymal stem cells (MSCs, 1×105 cell/ml) and optimized soluble amniotic membrane (SAM, 0.5 mg/ml). The physicochemical properties of the final subject were evaluated in vitro and in vivo environments. The results of the in vitro assay demonstrated that conjugation of the methacryloyl group with gelatin resulted in the formation of GelMA hydrogel (26.7±1.2 kPa) with higher mechanical stability. Modification of GelMA with a glycosaminoglycan sulfate (Keratose) increased controlled delivery of SAM (47.3% vs. 84.3%). Metabolic activity (93%) and proliferation (21.2 ± 1.5 µg/ml) of MSCs encapsulated in hydrogel improved by incorporation of SAM (0.5 mg/ml). Furthermore, the migration of fibroblasts was facilitated in the scratched assay by SAM (0.5 mg/ml)/MSCs (1×105 cell/ml) conditioned medium. The GelMA hydrogel groupes revealed regeneration of full-thickness skin defects in rats after 3 weeks due to the high angiogenesis (6.3 ± 0.3), cell migration, and epithelialization. The results indicated in situ forming and tunable GelMA hydrogels containing SAM and MSCs could be used as efficient substrates for full-thickness wound regeneration.

Intrafibrillar Crosslinking Enables Decoupling of Mechanical Properties and Structure of a Composite Fibrous Hydrogel.

The fibrous network of an extracellular matrix (ECM) possesses mechanical properties that convey critical biological functions in cell mechanotransduction. Engineered fibrous hydrogels show promise in emulating key aspects of ECM structure and functions. However, varying hydrogel mechanics without changing its architecture remains a challenge. A composite fibrous hydrogel is developed to vary gel stiffness without affecting its structure by controlling intrafibrillar crosslinking. The hydrogel is formed from aldehyde-modified cellulose nanocrystals and gelatin methacryloyl that provide the capability of intrafibrillar photocrosslinking. By varying the degree of gelatin functionalization with methacryloyl groups and/or photoirradiation time, the hydrogel's elastic modulus is changed by more than an order of magnitude, while preserving the same fiber diameter and pore size. The hydrogel is used to seed primary mouse lung fibroblasts and test the role of ECM stiffness on fibroblast contraction and activation. Increasing hydrogel stiffness by stronger intrafibrillar crosslinking results in enhanced fibroblast activation and increased fibroblast contraction force, yet at a reduced contraction speed. The developed approach enables the fabrication of biomimetic hydrogels with decoupled structural and mechanical properties, facilitating studies of ECM mechanics on tissue development and disease progression.

Photocross-Linkable and Shape-Memory Biomaterial Hydrogel Based on Methacrylated Cellulose Nanofibres.

In the context of three-dimensional (3D) cell culture and tissue engineering, 3D printing is a powerful tool for customizing in vitro 3D cell culture models that are critical for understanding the cell-matrix and cell-cell interactions. Cellulose nanofibril (CNF) hydrogels are emerging in constructing scaffolds able to imitate tissue in a microenvironment. A direct modification of the methacryloyl (MA) group onto CNF is an appealing approach to synthesize photocross-linkable building blocks in formulating CNF-based bioinks for light-assisted 3D printing; however, it faces the challenge of the low efficiency of heterogenous surface modification. Here, a multistep approach yields CNF methacrylate (CNF-MA) with a decent degree of substitution while maintaining a highly dispersible CNF hydrogel, and CNF-MA is further formulated and copolymerized with monomeric acrylamide (AA) to form a super transparent hydrogel with tuneable mechanical strength (compression modulus, approximately 5-15 kPa). The resulting photocurable hydrogel shows good printability in direct ink writing and good cytocompatibility with HeLa and human dermal fibroblast cell lines. Moreover, the hydrogel reswells in water and expands to all directions to restore its original dimension after being air-dried, with further enhanced mechanical properties, for example, Young's modulus of a 1.1% CNF-MA/1% PAA hydrogel after reswelling in water increases to 10.3 kPa from 5.5 kPa.

Preparation and Characterization of a Photo-Crosslinked Methacryloyl-Collagen Composite Film to Promote Corneal Nerve Regeneration via Surface Grafting of Taurine Molecules.

Blindness is frequently caused by corneal abnormalities, and corneal transplantation is the most effective treatment method. It is extremely important to develop high-quality artificial corneas because there are not enough donor corneas accessible for cornea transplantation. One of the most-often utilized materials is collagen, which is the primary component of natural cornea. Collagen-based corneal repair materials have good physicochemical properties and excellent biocompatibility, but how to promote the regeneration of the corneal nerve after keratoplasty is still a big challenge. In this research, in order to promote the growth of nerve cells on a collagen (Col) substrate, a novel collagen-based material was synthesized starting from the functionalization of collagen with unsaturated methacryloyl groups that three-dimensionally photopolymerize to a 3D network of chemically crosslinked collagen (ColMA), onto which taurine molecules were eventually grafted (ColMA-Tr). The physicochemical properties and biocompatibility of the Col, ColMA and ColMA-Tr films were evaluated. By analyzing the results, we found that all the three samples had good moisture retention and aq high covalent attachment of methacryloyl groups followed by their photopolymerization improved the mechanical properties of the ColMA and ColMA-Tr. Most importantly, compared with ColMA, the taurine-modified collagen-MA film significantly promoted the growth of nerve cells and corneal epithelial cells on its surface. Our preliminary results suggest that this novel ColMA-Tr film may have potential use in cornea tissue engineering in the future.

UV-cured polyvinyl alcohol-MXene mixed matrix membranes for enhancing pervaporation performance in dehydration of ethanol

In this study, Ti3C2Tx MXene nanosheets were synthesized and loaded into UV-curable acrylate polyvinyl alcohol (APVA) to fabricate a novel APVA-MXene mixed matrix membrane (MMM) for ethanol dehydration by pervaporation (PV) process. UV-curable APVA was synthesized by substituting the hydroxyl groups of PVA with the methacryloyl groups of glycidyl methacrylate (GMA). A rapid and energy-efficient method for fabricating the active layer was achieved by UV-crosslinking of APVA over a 2-min period. The morphology, crystal structure, chemical composition, and thermo-mechanical properties of the membranes were investigated by FESEM, XRD, FTIR, TGA, and static mechanical stretching. Incorporating MXene nanosheets into the APVA matrix resulted in an increase in permeation flux and separation factor for APVA-MXene MMMs due to its laminated structure with interlayer transport channels of two dimensions, excellent compatibility with the polymer matrix, and high surface hydrophilicity. When the MXene loading reached 3 wt%, the optimal separation performance was achieved with a permeation flux of 942 g/(m2.h) (increased by 106% compared to pristine APVA membranes) and a separation factor of 294 (increased by 79% compared to pristine APVA membranes).

Catechol Conjugation for Bioadhesion in Photo-Cross-Linkable Biomaterials

Inspired by mussel adhesion, catechol functionalization of different biomacromolecules has become a popular technique to impart adhesion to biomaterials. However, the bioadhesion capacity of catechol motifs in hydrogels that cross-link through free-radical-based systems is debated. Here, we revisit the bioadhesion efficacy of catechol functionalization in methacryloyl-modified photo-cross-linkable biomaterials. For this purpose, gelatin biomolecules functionalized with caffeic acid (CA) and methacryloyl groups are cross-linked using UV light to assess their cross-linking and bioadhesion. Despite the typical emphasis on wet adhesion of catecholic biomaterials, samples with larger catechol content showed lower adhesion strength, particularly when bioadhesives are cross-linked in situ as injectable sealants. Cross-linking was found to decay toward the interface with the substrates as more catechol groups are introduced to the hydrogels, which further undermines hydrogel integrity and adhesive bonds. Finally, cytotoxic and immunostimulatory effects associated with the catechol groups are evaluated for their translational potential in clinical applications.

Fabrication and optimization of 3D printed gelatin methacryloyl microneedle arrays based on vat photopolymerization.

Microneedles (MNs) are micrometer-sized arrays that can penetrate the skin in a minimally invasive manner; these devices offer tremendous potential for the transdermal delivery of therapeutic molecules. Although there are many conventional techniques for manufacturing MNs, most of them are complicated and can only fabricate MNs with specific geometries, which restricts the ability to adjust the performance of the MNs. Herein, we present the fabrication of gelatin methacryloyl (GelMA) MN arrays using the vat photopolymerization 3D printing technique. This technique allows for the fabrication of high-resolution and smooth surface MNs with desired geometries. The existence of methacryloyl groups bonded to the GelMA was verified by 1H NMR and FTIR analysis. To examine the effects of varying needle heights (1000, 750, and 500µm) and exposure times (30, 50, and 70s) on GelMA MNs, the height, tip radius, and angle of the needles were measured; their morphological and mechanical properties were also characterized. It was observed that as the exposure time increased, the height of the MNs increased; moreover, sharper tips were obtained and tip angles decreased. In addition, GelMA MNs exhibited good mechanical performance with no breakage up to 0.3mm displacement. These results indicate that 3D printed GelMA MNs have great potential for transdermal delivery of various therapeutics.

Understanding the Molecular Conformation and Viscoelasticity of Low Sol-Gel Transition Temperature Gelatin Methacryloyl Suspensions.

For biomedical applications, gelatin is usually modified with methacryloyl groups to obtain gelatin methacryloyl (GelMA), which can be crosslinked by a radical reaction induced by low wavelength light to form mechanically stable hydrogels. The potential of GelMA hydrogels for tissue engineering has been well established, however, one of the main disadvantages of mammalian-origin gelatins is that their sol-gel transitions are close to room temperature, resulting in significant variations in viscosity that can be a problem for biofabrication applications. For these applications, cold-water fish-derived gelatins, such as salmon gelatin, are a good alternative due to their lower viscosity, viscoelastic and mechanical properties, as well as lower sol-gel transition temperatures, when compared with mammalian gelatins. However, information regarding GelMA (with special focus on salmon GelMA as a model for cold-water species) molecular conformation and the effect of pH prior to crosslinking, which is key for fabrication purposes since it will determine final hydrogel's structure, remains scarce. The aim of this work is to characterize salmon gelatin (SGel) and salmon methacryloyl gelatin (SGelMA) molecular configuration at two different acidic pHs (3.6 and 4.8) and to compare them to commercial porcine gelatin (PGel) and methacryloyl porcine gelatin (PGelMA), usually used for biomedical applications. Specifically, we evaluated gelatin and GelMA samples' molecular weight, isoelectric point (IEP), their molecular configuration by circular dichroism (CD), and determined their rheological and thermophysical properties. Results showed that functionalization affected gelatin molecular weight and IEP. Additionally, functionalization and pH affected gelatin molecular structure and rheological and thermal properties. Interestingly, the SGel and SGelMA molecular structure was more sensitive to pH changes, showing differences in gelation temperatures and triple helix formation than PGelMA. This work suggests that SGelMA presents high tunability as a biomaterial for biofabrication, highlighting the importance of a proper GelMA molecular configuration characterization prior to hydrogel fabrication.

Sonochemical Degradation of Gelatin Methacryloyl to Control Viscoelasticity for Inkjet Bioprinting.

Inkjet printing enables the mimicry of the microenvironment of natural complex tissues by patterning cells and hydrogels at a high resolution. However, the polymer content of an inkjet-printable bioink is limited as it leads to strong viscoelasticity in the inkjet nozzle. Here it is demonstrated that sonochemical treatment controls the viscoelasticity of a gelatin methacryloyl (GelMA) based bioink by shortening the length of polymer chains without causing chemical destruction of the methacryloyl groups. The rheological properties of treated GelMA inks are evaluated by a piezo-axial vibrator over a wide range of frequencies between 10 and 10000Hz. This approach enables to effectively increase the maximum printable polymer concentration from 3% to 10%. Then it is studied how the sonochemical treatment effectively controls the microstructure and mechanical properties of GelMA hydrogel constructs after crosslinking while maintaining its fluid properties within the printable range. The control of mechanical properties of GelMA hydrogels can lead fibroblasts more spreading on the hydrogels. A 3D cell-laden multilayered hydrogel constructs containing layers with different physical properties is fabrictated by using high-resolution inkjet printing. The sonochemical treatment delivers a new path to inkjet bioprinting to build microarchitectures with various physical properties by expanding the range of applicable bioinks.

Synthesis of Methacryloylated Hydroxyethylcellulose and Development of Mucoadhesive Wafers for Buccal Drug Delivery

Non-ionic hydroxyethylcellulose (HEC) has limited mucoadhesive properties for application in transmucosal drug delivery. In this study, HEC was chemically modified by reaction with glycidyl methacrylate. This allowed introducing the methacryloyl groups to HEC structure to make it capable of forming covalent bonds with the sulfhydryl groups present in the mucin glycoprotein to achieve enhanced mucoadhesive properties. The results showed a successful modification of HEC as confirmed by 1H NMR and FTIR spectroscopies. The quantification of methacryloyl moieties was conducted using HPLC. The toxicity studies using in vivo planaria acute toxicity assay, in vivo planaria fluorescent test, and in vitro MTT assay with Caco-2 cell line confirmed that the chemical modification of HEC does not result in any toxicological effects. Mucoadhesive wafers were developed based on parent and modified HEC as a model dosage form for buccal delivery. The mucoadhesive properties of modified HEC assessed using a tensile test were found to be significantly better compared to unmodified HEC.

Double-cyclopolymerization using trifunctional incompletely condensed cage silsesquioxane with methacryloyl groups

Double-cyclopolymerization using trifunctional incompletely condensed cage silsesquioxane with methacryloyl groups

Enzymatic one-pot preparation of carboxylmethyl chitosan-based hydrogel with inherent antioxidant and antibacterial properties for accelerating wound healing

Facile preparation of multifunctional hydrogel wound dressings with inherent versatile properties is highly desirable in practical healthcare. Here, a biocompatible hydrogel was designed and fabricated via mild enzymatic crosslinking and polymerization. We first designed an enzymatic system containing horseradish peroxidase (HRP), H2O2, and the macromolecular initiator—acetoacetyl polyvinyl alcohol (PVA-ACAC), which can generate active PVA-ACAC carbon radicals via HRP-mediated oxidation by H2O2. Trimethylammonium chloride (Q), methacryloyl (MA) and phenol (Ph)-grafted carboxymethyl chitosan (Ph-QCMCS-MA) was then synthesized. HRP catalyzes the oxidation of phenol groups to achieve the fast phenol crosslinking, and PVA-ACAC carbon radicals initiate the polymerization of MA groups simultaneously, finally obtaining the target PPQM gel. The quaternary ammonium and phenol groups endow the PPQM gel with excellent antibacterial and antioxidant properties, respectively. This multifunctional hydrogel, which has additional adhesive and hemostatic properties, could promote wound healing processes in an in vivo full-thickness skin defect experiment by reducing the generation of pro-inflammatory cytokines (IL-6) and upregulating anti-inflammatory factors (IL-10) and angiogenesis-related cytokines (VEGF and α-SMA). As a result, it could be used as competitive wound dressings.

Chondroitin sulfate microspheres anchored with drug-loaded liposomes play a dual antioxidant role in the treatment of osteoarthritis

Reactive oxygen species (ROS) play a critical role in the pathogenesis of osteoarthritis. The injection of a single antioxidant drug is characterized by low drug utilization and short residence time in the articular cavity, limiting the therapeutic effect of antioxidant drugs on osteoarthritis. Currently, the drug circulation half-life can be extended using delivery vehicles such as liposomes and microspheres, which are widely used to treat diseases. In addition, the composite carriers of liposomes and hydrogel microspheres can combine the advantages of different material forms and show stronger plasticity and flexibility than traditional single carriers, which are expected to become new local drug delivery systems. Chondroitin sulfate, a sulfated glycosaminoglycan commonly found in native cartilage, has good antioxidant properties and degradability and is used to develop an injectable chondroitin sulfate hydrogel by covalent modification with photo-cross-linkable methacryloyl groups (ChsMA). Herein, ChsMA microgels anchored with liquiritin (LQ)-loaded liposomes (ChsMA@Lipo) were developed to delay the progression of osteoarthritis by dual antioxidation. On the one hand, the antioxidant drug LQ wrapped in ChsMA@Lipo microgels exhibits significant sustained-release kinetics due to the double obstruction of the lipid membrane and the hydrogel matrix network. On the other hand, ChsMA can eliminate ROS through degradation into chondroitin sulfate monomers by enzymes in vivo. Therefore, ChsMA@Lipo, as a degradable and dual antioxidant drug delivery platform, is a promising option for osteoarthritis treatment. Statement of significanceCompared with the traditional single carrier, the composite carriers of hydrogel microspheres and liposome can complement the advantages of different materials, which shows stronger plasticity and flexibility, and is expected to become a new and efficient drug delivery system.ChsMA@Lipo not only attenuates IL-1β-induced ECM degradation in chondrocytes but also inhibits the M1 macrophages polarization and the inflammasome activation.The obtained ChsMA@Lipo alleviates the progression of osteoarthritis in vivo, which is promising for osteoarthritis treatment.