Metals In Workers Research Articles

Assessement of Blood Lead and Cadmium Levels in Occupationally Exposed Workers of Jodhpur, Rajasthan.

In spite of the established knowledge regarding their toxicities, occupational exposure to heavy metals like lead and cadmium still continues because of their wide distribution in environment. Due to lack of awareness, most of the workers usually eat, smoke, drink at their workplace which may aggravate the metal exposure. The present study was planned to assess the blood levels of lead and cadmium in occupationally exposed workers of Jodhpur (India). A total of 110 individuals working in different industrial set ups (furniture, metal handicraft, welders) of Jodhpur district (exposed group), aged between 20 and 60years and 97 apparently healthy people (controls) with no history of occupational heavy metal exposure aged between 25 and 60 were recruited. Details of personal habits and demographics were recorded by means of self-developed questionnaire. 5ml of whole blood was drawn from every individual. Metal levels were measured by graphite furnace atomic absorption spectrophotometer. Statistical analysis was done using GraphPad Prism Software. Results showed that Blood Lead Level and Blood Cadmium Level (CdB) were significantly higher in the exposed group as compared to the non-exposed group. Significant age and gender-based differences were found in terms of blood cadmium levels but no such difference was observed in case of blood lead. The study also revealed that higher blood levels of these metals in workers are influenced by their occupational practices, lack of protection against workplace environment pollutants, thus increasing their susceptibility to metal toxicity.

Biological Monitoring of Occupational Exposure to Metals in Electric Steel Foundry Workers and Its Contribution to 8-Oxo-7,8-Dihydro-2'-Deoxyguanosine Levels.

In this study, the urinary concentrations of selected metals in workers from an electric steel foundry in Tunisia were assessed and compared with existing biological limit values and general population reference values. Moreover, the association between oxidative DNA damage, measured as urinary 8-oxo-7,8-dihydro-2’deoxyguanosine (8-oxodG) and co-exposure to metals and polycyclic aromatic hydrocarbons (PAHs) was evaluated. Urinary levels of 12 metals were determined by inductively coupled plasma-mass spectrometry (ICP-MS) in end-shift spot samples from 89 workers. The urinary levels of phenanthrene (U-PHE), as marker of exposure to PAHs, and 8-oxodG were also available. Median levels ranged from 0.4 µg/L (cobalt, Co, and thallium, Tl) to 895 µg/L (zinc, Zn). Only 1% of samples was above the biological limit values for Co, and up to 13.5% of samples were above limit values for Cd. From 3.4% (Co) to 72% (lead, Pb) of samples were above the reference values for the general population. Multiple linear regression models, showed that manganese (Mn), Zn, arsenic (As), barium (Ba), Tl, and Pb were significant predictors of 8-oxodG (0.012 ≤ p ≤ 0.048); U-PHE was also a significant predictor (0.003 ≤ p ≤ 0.059). The variance explained by models was low (0.11 ≤ R2 ≤ 0.17, p < 0.005), showing that metals and PAHs were minor contributors to 8-oxodG. Overall, the comparison with biological limit values showed that the study subjects were occupationally exposed to metals, with levels exceeding biological limit values only for Cd.

Human biomonitoring of metals in workers at the waste-to-energy incinerator of Turin: An Italian longitudinal study.

Evidence of negative health effects of solid waste management is uncertain. Available reviews suggests the use of biomarkers in human biomonitoring (HBM) to detect low exposure levels. In September 2013, a waste-to-energy plant located in the Turin (Italy) went into operation. The SPoTT (acronym for Population health Surveillance in the Turin incinerator's area) monitoring program was set up to assess the potential health impact caused by the plant. The paper illustrates the results of HBM of metals in the workers before the plant went into operation and then at 1 year and 3 years. This study is one of the few focusing on workers with a longitudinal design (the first in Italy). Eighteen metals in urine and lead in blood were determined by sector field inductively coupled plasma mass spectrometry. Information on participant habits and other characteristics that could potentially affect metals concentrations were collected via a structured questionnaire. Subjects were classified according to their work role at the facility: administrative staff workers (AW); plant workers (PW). Nonparametric methods were used to evaluate the changes in metals concentration over time. Comparison of the metals concentration in the samples taken at baseline and at the following two-time points shows a general decrease in levels: urinary concentration of beryllium (Be), cobalt (Co), mercury (Hg), Ir, nickel (Ni), tin (Sn), thallium (Tl), and blood level of lead (Pb) among the PW and Ir and Pd among the AW were significantly lower at T2 versus baseline. A decrease was also recorded in arsenic (As) among the PW and in cadmium (Cd), chromium (Cr), palladium (Pd), rhodium (Rh), and zinc (Zn) for both groups, whereas the levels of copper (Cu) and vanadium (V) remained unchanged over time. The downward trend remained also after taking confounding factors into account. The only exceptions were Mn, Pt, Sb among the PW: increase levels between T0 and T2 were recorded, which cannot be specifically attributable to the plant activity. The median urinary and blood concentrations of the metals were lower than those reported in the literature and were below the occupational reference values at all three-time points. Our results are consistent with those reported for the cohort of local residents and with the ambient air measurements.

Role of MnSOD Val16Ala Gene Polymorphism in Changing the Level of Serum Metals in Workers Exposed to Heavy Metals in Al-Nasiriyah City

Low activity of antioxidant enzymes due to polymorphism in antioxidant genes and differences in mineral and metal levels creates oxidative stress that may play a role in advancing many diseases. The aim of this study was to determine the role of Manganese superoxide dismutase (MnSOD) gene polymorphism [rs4880 Val16Ala)] in exposed workers and to compare the levels of metals and minerals among its various genotypes in control group. A total of 80 individuals including age and gender matched workers and control group were genotyped. Detection of rs4880 polymorphism was done using sequencing technique. The blood serum were tested for determination of metals and minerals using Atomic absorption spectrophotometer (AA 6600 Shimadzu). This study indicate that the frequency of T allele was higher than that of C allele in control group as well as in workers. Our results indicate no association between all genotypes in study subjects. The results of present study indicates that Pb and Cd concentration differ significantly between TT genotypes of MnSOD (rs4880) gene polymorphism as compared to CC genotypes in workers and control group (p<0.05). Control group with TT, TC and CC genotypes have high concentration of Fe, Cu and Zn as compared to workers group.

Exposure to Wood Dust and Heavy Metals in Workers Using CCA Pressure-Treated Wood

Exposure to Wood Dust and Heavy Metals in Workers Using CCA Pressure-Treated Wood

Exposure to wood dust and heavy metals in workers using CCA pressure-treated wood.

Chemical pesticide treatment enables relatively nonresistant woods to be used in outdoor construction projects. The most prevalent procedure used to protect these woods is pressure treatment with chromium, copper, and arsenic (CCA). This pilot study examined the airborne concentration and particle size distribution of wood particles, chromium, copper, and arsenic at both outdoor (measured over the whole work day) and indoor (measured during the performance of specific tasks) work sites. At the outdoor residential deck construction sites, the arithmetic mean total dust concentration, measured using personal filter cassette samplers, was 0.57 mg/m3. The mass median aerodynamic diameter (da) of the outdoor wood dust was greater than 20 microm. Indoor wood dust concentrations were significantly greater than those measured outdoor and were job category-dependent. The highest mean breathing zone dust concentration, 49.0 mg/m3, was measured at the indoor sanding operation. Personal impactor sampling demonstrated that the mean total airborne concentration of arsenic, but not chromium or copper, was consistently above recommended occupational exposure levels at the indoor work site, and occasionally at the outdoor work sites. At the indoor sanding operation, the mean total chromium, copper, and arsenic concentrations were 345, 170, and 342 microg/m3, respectively. Thus, significant exposure to airborne heavy metals can occur as a result of indoor and outdoor exposure to CCA pressure-treated wood dust. Therefore, current standards for wood dust may not adequately protect workers from the heavy metals commonly used in CCA pressure-treated wood.