Metal Particles Research Articles

Photoluminescence Quenching Upon Growth of Metal Nanoparticles: Quantum-Mechanical Views.

In dictating the optical processes in metal nanoparticles, for instance, quantum nature of free electrons is significantly dominant and plays very crucial roles at the level of nanoscale dimensions of materials. As consequences of the quantum-confinement effects on the conduction electrons, surface-plasmon resonance induced optical absorption and light emission properties of metal nanoparticles are found to be strongly dependent on physical dimensions of the nanomaterials. In addition, surface-confined acoustic vibration (phonon) modes have been experimentally observed to depend on the sizes of the metal nanoparticles. Also, interestingly, tuning of the surface-plasmon resonance condition is found to enhance the intensity of the acoustic Raman modes in metal nanoparticles. The study highlights the role of plasmon-phonon coupling in Co metal nanoparticles embedded in a silica-glass. In the research field of nanosciences and nanotechnologies, extraordinary behaviour and properties of nanoscale matters are investigated. In this context, interesting studies have been discussed in this review article to elaborate optical, chemical and photoluminescence properties of nanoscale Ag metal particles. Subtle detection of optical phenomena associated with the excited many-body electronic processes in the metal nanoparticles, for example, are very interesting but definitely challenging. Here we make an attempt to find out how the thermal growth of Ag metal nanoparticles in a glass matrix snuffs out the light emission from the samples? Quantum mechanical interpretations of the underlying processes about the quenching of photoluminescence phenomena with the growth of the metal nanoparticles will help to fine tune the optical properties of plasmonic systems as well as to harness potential applications of the nanomaterials.

Study on the Removal Effect of 3DEPs on Microplastics in Groundwater and Desalination Mechanism

Owing to water scarcity, groundwater quality has become an important constraint on sustainable regional development, especially in coastal areas. Coastal groundwater is subject to natural conditions and intense human activities, and the evolution of water quality is extremely complex, with the possibility of seawater intrusion into the groundwater, leading to the salinisation of freshwater aquifers. At present, the commonly used methods for removing groundwater pollution include coagulation, adsorption, biological method, membrane technology, etc., among which the coagulation method is more commonly used. At present, three-dimensional electrode electrochemical technology is widely used in high salinity organic wastewater and many organic wastewaters, but there are few studies related to microplastic removal by three-dimensional electrode electrochemical technology using metallic aluminium particles as particle electrodes. The treatment of microplastics in coastal groundwater is a relatively novel issue, and with the increasing application of three-dimensional electrochemical technology in the study of desalination, the three-dimensional electrode electrochemical technology will be promising due to the high salinity of coastal groundwater, the increasingly serious pollution of microplastics, and the fluctuation of water quality and quantity.

Simple processing via thermal treatment and catalyst infiltration to enhance nickel electrode performance for liquid alkaline water electrolyzers

Two simple processes for enhancing liquid alkaline water electrolyzer performance are demonstrated. Both enhance 3D Ni electrodes by introducing a micron-scale rough structure throughout the bulk of the electrode. Oxidation/reduction relies on a simple thermal treatment cycle to create surface roughening through the volumetric expansion during NiO formation and volume contraction during reduction back to Ni metal. Catalyst infiltration introduces a washcoat of additional metal particles throughout the electrode, by flooding the electrode with catalyst precursor and converting it to micron-scale particles via a reducing thermal treatment. The largest improvement in performance (211 mV at 1.8 A cm−2) is observed for infiltrated NiFe-3x catalyst. For Fe-free Ni-only electrodes, oxidation/reduction provides a larger improvement (157 mV at 1.8 A cm−2) than infiltrated Ni-3X (106 mV at 1.8 A cm−2). For both processes, the observed electrode surface structure and performance is quite sensitive to the thermal treatment temperature.

Decomposition and migration behavior of Pt salt on Al2O3 and SiO2 upon calcination studied by XAFS and UV–visible spectroscopy using a laboratory-type spectrometer

Thermal decomposition behavior of two kinds of Pt salts, namely, H2PtCl6 and Pt(NH3)4Cl2, on amorphous SiO2 and γ-Al2O3 under air to prepare supported platinum catalysts up to 773 K was investigated by in-situ laboratory X-ray absorption fine structure (XANES/EXAFS) and UV–Vis spectroscopy. Changing the oxidation state of platinum species and the coordination environment, the migration to vacant sites or aggregation process on the surface were discussed. The supported H2PtCl6 was reduced to Pt2+ species under air flow around 573 K by eliminating Cl/O ligand atoms until 573 K. High-temperature treatment caused the re-oxidation of the supported Pt species on Al2O3, but it did not affect the oxidation state of SiO2-supported species. The formed platinum oxychloride on Al2O3 was stable under air, but it partly decomposed to atomic-like species above 673 K, followed by migration on the surface, trapping at the cation vacant site because of its defect spinel structure. The lattice oxygen atoms of Al2O3 adjacent to Pt atom captured might cause the re-oxidation, and molecular oxygen was not the oxidant. The partly formed atomic-like species migrates on the SiO2 surface, followed by aggregation to form metallic Pt particles above 573 K.

Effects of expanded graphite’s structural and elemental characteristics on its oil and heavy metal sorption properties

Expanded graphite has promising potential environmental applications due to its porous structure and oleophilic nature, which allow it to absorb large quantities of oil. The material is produced by intercalating graphite and applying heat to convert the intercalant into gas to cause expansion between the layers in the graphite. Using different intercalants and temperature conditions results in varying properties of expanded graphite. This work has proven that the sorption properties of commercial expanded graphite differ significantly due to the material’s structural and elemental characteristics, which can be attributed to the intercalation method. This resulted in various degrees of exfoliation of the graphite and possible functionalisation of the graphene sheets within the structure. This affected the material's sorption capacity and its affinity for heavy metal sorption by incorporating selectivity towards the sorption of certain metals. It was found that sample EG3, which underwent a less harsh expansion, exhibited lower porosity than EG1, and thus, the sample absorbed less oil at 37.29 g/g compared to the more expanded samples EG1 and EG2 with 55.16 g/g and 48.82 g/g, respectively. However, it was able to entrap a wider variety of metal particles compared to EG1 and EG2, possibly due to its smaller cavities allowing for a capillary effect between the graphene sheets and greater Van der Waals forces. A second possibility is that ionic or coordination complexes could form with certain metals due to the possible functionalisation of the expanded graphite during the intercalation process. This would be in addition to coordination between the metals and expanded graphite carbon atoms. The findings suggest that there is evidence of functionalisation as determined by XRD and elemental analyses. However, further investigation is necessary to confirm this hypothesis. The findings in this work suggest that the first mechanism of sorption was more likely to be related to the degree of expansion of the expanded graphite. Various metals are present in used oil, and their removal can be challenging. Some metals in oil are not considered heavy since they have a relatively low density but can be associated with heavy metals in terms of toxicity.

Nanoimprint Lithography for Next-Generation Carbon Nanotube-Based Devices.

This research reports the development of 3D carbon nanostructures that can provide unique capabilities for manufacturing carbon nanotube (CNT) electronic components, electrochemical probes, biosensors, and tissue scaffolds. The shaped CNT arrays were grown on patterned catalytic substrate by chemical vapor deposition (CVD) method. The new fabrication process for catalyst patterning based on combination of nanoimprint lithography (NIL), magnetron sputtering, and reactive etching techniques was studied. The optimal process parameters for each technique were evaluated. The catalyst was made by deposition of Fe and Co nanoparticles over an alumina support layer on a Si/SiO2 substrate. The metal particles were deposited using direct current (DC) magnetron sputtering technique, with a particle ranging from 6 nm to 12 nm and density from 70 to 1000 particles/micron. The Alumina layer was deposited by radio frequency (RF) and reactive pulsed DC sputtering, and the effect of sputtering parameters on surface roughness was studied. The pattern was developed by thermal NIL using Si master-molds with PMMA and NRX1025 polymers as thermal resists. Catalyst patterns of lines, dots, and holes ranging from 70 nm to 500 nm were produced and characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Vertically aligned CNTs were successfully grown on patterned catalyst and their quality was evaluated by SEM and micro-Raman. The results confirm that the new fabrication process has the ability to control the size and shape of CNT arrays with superior quality.

Effects of gravity and anisotropy on the convective instability in a nanofluid porous medium

Controlling thermal loads in heat transfer systems that produce high heat flux is a real mechanical challenge. Various cooling/heating techniques are available to achieve the reliability requirements of electronic devices. Among them, the use of nanofluids is one of the important techniques that provide long term stability, higher cooling rates, decreased pumping power needs, and cost-effectiveness. Instability in fluids typically occurs when a disturbance affects the equilibrium of forces of external, inertial, or viscous origin acting on a system. The disturbances may arise from the surroundings due to small changes in the boundary conditions, surface roughness, free stream turbulence, noise, etc. In several circumstances, these disturbances are very small and hence cannot be measured with the available instruments but can be observed after the instability sets in. In this study, we focus on examining the effect of time-periodic vertical gravity modulation on the initiation of natural convection in a porous medium saturated with a nanofluid. The porous medium is characterized by being heated at the bottom and possessing anisotropic properties in terms of permeability and thermal diffusivity. Specifically, we investigate the onset of convection in water-based nanofluids that contain metallic (Cu) and metal oxide ( A l 2 O 3 ) particles. The Khanafer-Vafai-Lightstone (KVL) nanofluid model is employed to describe the behavior of the nanofluids, and the thresholds for convective instability are determined using the Mathieu functions. In addition, we study the instabilities of synchronous and subharmonic modes and explore their transitions along with practical applications.

Exploring the Interfacial Hydrogen Transfer between Pt and the Siliceous Framework and Its Promotional Effect on the Isotope Catalytic Exchange.

Interfacial hydrogen transfer between metal particles and catalyst supports is a ubiquitous phenomenon in heterogeneous catalysis, and this occurrence on reducible supports has been established, yet controversies remain about how hydrogen transfer can take place on nonreducible supports, such as silica. Herein, highly dispersed Pt clusters supported on a series of porous silica materials with zeolitic or/and amorphous frameworks were prepared to interrogate the nature of hydrogen transfer and its promotional effect on H2-HDO isotope catalytic exchange. The formation of zeolitic frameworks upon these porous silica supports by hydrothermal crystallization greatly promotes the interfacial hydrogen bidirectional migration between metal clusters and supports. Benefiting from this transfer effect, the isotope exchange rate is enhanced by 10 times compared to that on the amorphous counterpart (e.g., Pt/SBA-15). In situ spectroscopic and theoretical studies suggest that the defective silanols formed within the zeolite framework serve as the reactive sites to bind HDO or H2O by hydrogen bonds. Under the electrostatic attraction interaction, the D of hydrogen-bonded HDO scrambles to the Pt site and the dissociated H on Pt simultaneously spills back to the electronegative oxygen atom of adsorbed water to attain H-D isotope exchange with an energy barrier of 0.43 eV. The reverse spillover D on Pt combines with the other H on Pt to form HD in the effluent. We anticipate that these findings are able to improve our understanding of hydrogen transfer between metal and silica supports and favor the catalyst design for the hydrogen-involving reaction.

Influence of friction stir processing on microstructure and mechanical properties of AA6061 reinforced with Zr and Ni metallic particles

Influence of friction stir processing on microstructure and mechanical properties of AA6061 reinforced with Zr and Ni metallic particles

Solvation Properties of Neutral Gold Species in Supercritical Water Studied By THz Spectroscopy

AbstractSupercritical water provides distinctly different solvation properties compared to what is known from liquid water. Despite its prevalence deep in the Earth's crust and its role in chemosynthetic ecosystems in the vicinity of hydrothermal vents, molecular insights into its solvation mechanisms are still very scarce compared to what is known for liquid water. Recently, neutral metal particles have been detected in hydrothermal fluids and proposed to explain the transport of gold species to ore deposits on Earth. Using ab initio molecular dynamics, we elucidate the solvation properties of small gold species at supercritical conditions. The neutral metal clusters themselves contribute enormous THz intensity not because of their intramolecular vibrations, but due to their pronounced electronic polarization coupling to the dynamical supercritical solvent, leading to a continuum absorption up to about 1000 cm−1. On top, long‐lived interactions between the gold clusters and solvation water leads at these supercritical conditions to a sharp THz resonance that happens to be close to the one due to H‐bonding in liquid water at ambient conditions. The resulting distinct resonances can be used to analyse the solvation properties of neutral metal particles in supercritical aqueous solutions.

Highly Efficient and Selective Hydrogenation of Biomass-Derived Furfural Using Interface-Active Rice Husk-Based Porous Carbon-Supported NiCu Alloy Catalysts.

A series of bimetallic NixCuy catalysts with different metal molar ratios, supported on nitric acid modified rice husk-based porous carbon (RHPC), were prepared using a simple impregnation method for the liquid-phase hydrogenation of furfural (FFA) to tetrahydrofurfuryl alcohol (THFA). The Ni2Cu1/RHPC catalyst, with an average metal particle size of 9.3 nm, exhibits excellent catalytic performance for the selective hydrogenation of FFA to THFA. The 100% conversion of FFA and the 99% selectivity to THFA were obtained under mild reaction conditions (50 °C, 1 MPa, 1 h), using water as a green reaction solvent. The synergistic effect of NiCu alloy ensures the high catalytic activity. The acid sites and oxygen-containing functional groups on the surface of the modified RHPC can enhance the selectivity of THFA. The Ni2Cu1/RHPC catalyst offers good cyclability and regenerability. The current work proposes a simple method for preparing an NiCu bimetallic catalyst. The catalyst exhibits excellent performance in the catalytic hydrogenation of furfural to tetrahydrofurfuryl alcohol, which broadens the application of non-noble metal bimetallic nanocatalysts in the catalytic hydrogenation of furfural.

Solvation Properties of Neutral Gold Species in Supercritical Water Studied By THz Spectroscopy.

Supercritical water provides distinctly different solvation properties compared to what is known from liquid water. Despite its prevalence deep in the Earth's crust and its role in chemosynthetic ecosystems in the vicinity of hydrothermal vents, molecular insights into its solvation mechanisms are still very scarce compared to what is known for liquid water. Recently, neutral metal particles have been detected in hydrothermal fluids and proposed to explain the transport of gold species to ore deposits on Earth. Using ab initio molecular dynamics, we elucidate the solvation properties of small gold species at supercritical conditions. The neutral metal clusters themselves contribute enormous THz intensity not because of their intramolecular vibrations, but due to their pronounced electronic polarization coupling to the dynamical supercritical solvent, leading to a continuum absorption up to about 1000 cm-1. On top, long-lived interactions between the gold clusters and solvation water leads at these supercritical conditions to a sharp THz resonance that happens to be close to the one due to H-bonding in liquid water at ambient conditions. The resulting distinct resonances can be used to analyse the solvation properties of neutral metal particles in supercritical aqueous solutions.

Preparation, mechanical properties and strengthening mechanisms of T15 particles reinforced Cu matrix composites

High speed steel T15 particle reinforced copper matrix composites were prepared using powder metallurgy. A systematic investigation was conducted into the effects on the microstructure and mechanical properties of the composites of the sintering temperature, T15 hard particle content, and particle size. The results indicate that the grain size is efficiently refined by the addition of T15 hard particles. The decrease in grain size of 10 wt.% T15/Cu composite is from 6.87 μm to 1.34 μm at the same sintering temperature, and the grain size is proportional to both the sintering temperature and the size of hard particles. As the sintering temperature increases, the relative density and hardness of the composite gradually increase, while the yield strength initially increases and then declines. When sintered at 790 °C, the 10 wt.% T15/Cu composite achieved a maximum yield strength of 160.1 MPa, which is 178.9% and 30.6% higher than that of pure copper and 10 wt.% TiC/Cu composites, respectively. There are no visible cracks after compression, and a good balance of strength and toughness is achieved. Meanwhile, the primary contributions of strengthening mechanisms such as grain refinement, thermal expansion mismatch and load transfer to the mechanical properties of T15/Cu composites were analyzed. It is anticipated that this will establish a foundation for the preparation and application of high-performance copper matrix composites reinforced with metal particles.

Effect of eddy currents on metal fine particles in high gradient magnetic separation using a superconducting magnet

Abstract Dry high gradient magnetic separation is one of the key technologies expected in removing magnetic metal fine particles as contaminations in the production process of various powders. However, the effect of eddy currents on such metal fine particles in dry high gradient magnetic separation has not been adequately explored in previous research. In order to understand this phenomenon more comprehensively, we conducted particle trajectory simulations using a finite element analysis with numerical methods and actual magnetic separation experiments to investigate the influence of eddy currents on magnetic separation efficiency. The results show that for both paramagnetic and diamagnetic metal particles, eddy currents can favourably influence the capture efficiency. Furthermore, these effects depend on the particle size, electrical conductivity, and the rate of change in the magnetic field. Therefore, by taking eddy currents into account, magnetic separation systems can be better optimized and their performance further improved.

A comparative study of the biosynthesis of CuNPs by Niallia circulans G9 and Paenibacillus sp. S4c strains: characterization and application as antimicrobial agents

BackgroundBiosynthesis of metallic nanoparticles using microorganisms are a fabulous and emerging eco-friendly science with well-defined sizes, shapes and controlled monodispersity. Copper nanoparticles, among other metal particles, have sparked increased attention due to their applications in electronics, optics, catalysis, and antimicrobial agents.ResultsThis investigation explains the biosynthesis and characterization of copper nanoparticles from soil strains, Niallia circulans G9 and Paenibacillus sp. S4c by an eco-friendly method. The maximum reduction of copper ions and maximum synthesis CuNPs was provided by these strains. Biogenic formation of CuNPs have been characterized by UV–visible absorption spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray analysis and transmission electron microscopy analysis. Using UV-visible spectrum scanning, the synthesised CuNPs’ SPR spectra showed maximum absorption peaks at λ304&308 nm. TEM investigation of the produced CuNPs revealed the development of spherical/hexagonal nanoparticles with a size range of 13–100 nm by the G9 strain and spherical nanoparticles with a size range of 5–40 nm by the S4c strain. Functional groups and chemical composition of CuONPs were also confirmed. The antimicrobial activity of the biosynthesized CuNPs were investigated against some human pathogens. CuNPs produced from the G9 strain had the highest activity against Candida albicans ATCC 10,231 and the lowest against Pseudomonas aeruginosa ATCC 9027. CuNPs from the S4c strain demonstrated the highest activity against Escherichia coli ATCC 10,231 and the lowest activity against Klebsiella pneumonia ATCC 13,883.ConclusionThe present work focused on increasing the CuNPs production by two isolates, Niallia circulans G9 and Paenibacillus sp. S4c, which were then characterized alongside. The used analytics and chemical composition techniques validated the existence of CuONPs in the G9 and S4c biosynthesized nano cupper. CuNPs of S4c are smaller and have a more varied shape than those of G9 strain, according to TEM images. In terms of antibacterial activity, the biosynthesized CuNPs from G9 and S4c were found to be more effective against Candida albicans ATCC 10,231 and E. coli ATCC 10,231, respectively.

Acoustofluidic manipulation for submicron to nanoparticles.

Particles, ranging from submicron to nanometer scale, can be broadly categorized into biological and non-biological types. Submicron-to-nanoscale bioparticles include various bacteria, viruses, liposomes, and exosomes. Non-biological particles cover various inorganic, metallic, and carbon-based particles. The effective manipulation of these submicron to nanoparticles, including their separation, sorting, enrichment, assembly, trapping, and transport, is a fundamental requirement for different applications. Acoustofluidics, owing to their distinct advantages, have emerged as a potent tool for nanoparticle manipulation over the past decade. Although recent literature reviews have encapsulated the evolution of acoustofluidic technology, there is a paucity of reports specifically addressing the acoustical manipulation of submicron to nanoparticles. This article endeavors to provide a comprehensive study of this topic, delving into the principles, apparatus, and merits of acoustofluidic manipulation of submicron to nanoparticles, and discussing the state-of-the-art developments in this technology. The discourse commences with an introduction to the fundamental theory of acoustofluidic control and the forces involved in nanoparticle manipulation. Subsequently, the working mechanism of acoustofluidic manipulation of submicron to nanoparticles is dissected into two parts, dominated by the acoustic wave field and the acoustic streaming field. A critical analysis of the advantages and limitations of different acoustofluidic platforms in nanoparticles control is presented. The article concludes with a summary of the challenges acoustofluidics face in the realm of nanoparticle manipulation and analysis, and a forecast of future development prospects.

Degradation, transformation and cytotoxicity of triphenyl phosphate on surface of different transition metal salts in atmospheric environment

Triphenyl phosphate (TPhP) and transition metal elements have been ubiquitously detected in the atmosphere, which can participate in atmospheric chemical reactions and induce damage to human health. Currently the understanding of TPhP degradation, transformation and cytotoxicity on atmospheric particles surface are still limited. Therefore, this study used laboratory simulation methods to investigate the influence of irradiation time, transition metal salts, relative humidity (RH) to TPhP degradation, transformation and relative cytotoxicity. TPhP was coated on particle surfaces of four transition metal salts (MnSO4, CuSO4, FeSO4 and Fe2(SO4)3) in the experiment. Within 12 h irradiation, the significant TPhP photodegradation can be observed on all particles surface. Among these influence factors, the irradiation and RH were the crucial aspects to TPhP degradation, which primarily affect the OH concentration in the atmosphere. The transition metal elements only exhibited slightly catalytic effect to TPhP degradation. The mechanism study indicated that the major degradation products of TPhP are diphenyl hydrogen phosphate (DPhP) and OH-DPhP, which originated from the phenoxy bond cleavage and hydroxylation of TPhP induced by OH. As for the cytotoxicity to A549 cells, all the transition metal particles coated with TPhP can cause cellular injury, which was chiefly induced by the transition metal salt. The possible cytotoxicity mechanism of these particles to A549 cells can be attributed to the excessive reactive oxygen species (ROS) production. This study may provide a further understanding of TPhP degradation and related cytotoxicity with the coexistent transition metal salts in the atmosphere.

Adsorption and distribution of heavy metals in aquatic environments: The role of colloids and effects of environmental factors

The study investigated the distributions of heavy metals (Cd, Cr, Cu, Mn, and Pb) between dissolved fraction (<0.7 µm) and particles (>0.7 µm) during the adsorption process. The dissolved fraction was further separated into truly dissolved (<3 kDa) and colloidal (3 kDa-0.7 µm) fractions. Significant metal adsorption occurred on the colloids, resulting in their aggregation into particles, which in turn influenced the particle adsorption kinetics. Colloids could either accelerate or inhibit the transformation of metal ions into particulates, depending on their stability. Competitive metals for colloids (Pb and Cr) were more susceptible to the effects of colloids than other elements. DOM was the predominant environmental factor influencing colloid behavior. The XDLVO theory showed that DOM enhanced the negative charge of colloids and made the colloid surface more hydrophilic, inhibiting the aggregation of colloids. DOM resulted in substantial increases in the concentrations of colloidal Pb and Cr from 0.31 μg/L and 4.58 μg/L to 20.52 μg/L and 43.51 μg/L, respectively, whereas the increment for less competitive metals (Cd and Mn) was smaller. These findings suggest that the distribution of heavy metals is influenced not only by adsorption from particles and ions but also by the complex dynamics of colloids.

Coral-Inspired Terahertz-Infrared Bi-Stealth Electronic Skin.

The development of electronic skin with dual stealth functionality is crucial for enabling devices to operate effectively in dynamic electromagnetic environments, thereby facilitating intelligent electromagnetic protection for autonomous perception. However, achieving compatibility between terahertz (THz) and infrared (IR) stealth technologies remains largely unexplored due to their inherent contradictions. Herein, inspired by natural corals, a novel coral-like multi-scale composite foam (CMSF) was proposed that ingeniously reconciles these contradictions. The design capitalizes on the conductive network and heat insulation properties of the foam skeleton, the loss effects and low infrared emission of metal particles, and the infrared transparency of magneto-optical materials. This approach leads to the realization of a THz-IR bi-stealth electronic skin concept. The CMSF exhibits a maximum reflection loss of 84.8 dB in the terahertz band, while its infrared stealth capability ensures environmental adaptability under varying temperatures. Furthermore, the electronic skin exhibits exceptional sensitivity and reliability as a wearable device for perceiving environmental changes. This advanced material, combining multispectral stealth with sensing capabilities, holds immense potential for applications ranging from camouflage technology to smart wearables.

Low temperature activation of methane to hydrogen depending on tailored electron transfer over Ni–Cr composite oxide

Current industrial use of methane depends mainly on high-temperature conversion, resulting in high energy consumption and catalyst sintering inactivation. In this paper, metal oxide catalysts with different Ni/Cr ratios were obtained by the sol-gel method for the methane activation reaction. The structure-property relationships of the catalysts were investigated by XRD, XPS, H2-TPR, TG, N2 adsorption-desorption, and CV, focusing on the interaction between Ni–Cr in the composite oxide catalysts. The results showed that Ni0–NiCrO3/Cr2O3 structure was formed after the Ni–Cr oxides underwent the reduction and calcination process, which provided a structural support for electron transfer between the two metals. The least prone to sintering nickel metal particles and the highest content of high-valent chromium ions were present in Ni1Cr2. XPS confirmed that this counterpart acts as the donor and acceptor for electron transfer in the catalysts, accelerating oxidation-reduction reaction over the catalyst. The catalyst exhibited the most excellent conversion and product selectivity in the methane activation reaction.