Metal-organic Framework Glasses Research Articles

Gas separation in bimetallic Zn/Co-ZIF-62 glass membrane

Metal-organic framework (MOF) glasses, are attracting increasing attention in the gas separation field due to their component flexibility, ease of processing and porous structures. In this work, a series of bimetallic MOF glass membranes were synthesized and the impact of the metal node ratio (Co/Zn) on the gas separation performance of the membranes was investigated. It is found that the replacement of Zn nodes by Co in the ZIF-62 glass membrane leads to a nonlinear increase in the separation selectivity for CO2/CH4 and H2/CH4. Such a phenomenon corresponds to the mixed-metal node effect found in the MOF glass. Through the structural characterization results, we found that the different affinities of the central metal nodes towards gas molecules and the diversity in porosity of the Zn/Co-ZIF-62 membranes could be the two main reasons for the evolution of the gas separation properties in the ZIF-62 glass membranes. This work gives a new approach to developing MOF glass membranes with high-performance gas separation.

Highly porous metal-organic framework liquids and glasses via a solvent-assisted linker exchange strategy of ZIF-8

By combining the porosity of crystalline metal-organic frameworks (MOFs) with the unique processability of the liquid state, melt-quenched MOF glasses offer exciting opportunities for molecular separation. However, progress in this field is limited by two factors. Firstly, only very few MOFs melt at elevated temperatures and transform into stable glasses upon cooling the corresponding MOF liquid. Secondly, the MOF glasses obtained thus far feature only very small porosities and very small pore sizes. Here, we demonstrate solvent-assisted linker exchange (SALE) as a versatile method to prepare highly porous melt-quenched MOF glasses from the canonical ZIF-8. Two additional organic linkers are incorporated into the non-meltable ZIF-8, yielding high-entropy, linker-exchanged ZIF-8 derivatives undergoing crystal-to-liquid-to-glass phase transitions by thermal treatment. The ZIF-8 glasses demonstrate specific pore volumes of about 0.2 cm3g–1, adsorb large amounts of technologically relevant C3 and C4 hydrocarbons, and feature high kinetic sorption selectivities for the separation of propylene from propane.

High-Performance Dendrite-Free Lithium Metal Anode Based on Metal-Organic Framework Glass.

The performance of lithium metal batteries is severely hampered by uncontrollable dendrite growth and volume change within the anode. This work addresses these obstacles by introducing a novel strategy: applying an isotropic and internal grain-boundary-free layer, specifically, a metal-organic framework (MOF) glass layer with nano-porosity onto the electrochemically plated lithium metal anode. Both ab initio and classical molecular dynamics simulations indicate that the MOF glass layer makes the lithium transport smooth and uniform via its internal monolithic and interfacial advantages. This MOF glass layer with the fast and more uniform lithium diffusion in the monolithic interior and its interface enables dendrite-free lithium plating and stripping through surface confinement effect and interfacial effect. When employed in symmetric batteries, the achieved Li metal anode can operate over 300h at 1mAcm-2. The full batteries matched with LiFePO4 exhibit high capacity (148mAhg-1), excellent rate performance (61mAhg-1 at 5C), and outstanding cycling stability (with capacity retention of ≈90% after 1000 cycles). The full batteries matched with high-voltage LiCoO2 also show superior performances. Therefore, the strategy of utilizing a MOF glass layer enables the development of high-performance lithium metal anodes.

Dynamics of Linkers in Metal-Organic Framework Glasses.

Metal-organic framework (MOF) glasses have emerged as a new class of organic-inorganic hybrid glass materials. Considerable efforts have been devoted to unraveling the macroscopic dynamics of MOF glasses by studying their rheological behavior; however, their microscopic dynamics remain unclear. In this work, we studied the effect of vitrification on linker dynamics in ZIF-62 by solid-state 2H nuclear magnetic resonance (NMR) spectroscopy. 2H NMR relaxation analysis provided a detailed picture of the mobility of the ZIF-62 linkers, including local restricted librations and a large-amplitude twist; these details were verified by molecular dynamics. A comparison of ZIF-62 crystals and glasses revealed that vitrification does not drastically affect the fast individual flipping motions with large-amplitude twists, whereas it facilitates slow cooperative large-amplitude twist motions with a decrease in the activation barrier. These observations support the findings of previous studies, indicating that glassy ZIF-62 retains permanent porosity and that short-range disorder exists in the alignment of ligands because of distortion of the coordination angle.

Effective C4 Separation by Zeolite Metal-Organic Framework Composite Membranes.

Inorganic zeolites have excellent molecular sieving properties, but they are difficult to process into macroscopic structures. In this work, we use metal-organic framework (MOF) glass as substrates to engineer the interface with inorganic zeolites, and then assemble the discrete crystalline zeolite powders into monolithic structures. The zeolites are well dispersed and stabilized within the MOF glass matrix, and the monolith has satisfactory mechanical stabilities for membrane applications. We demonstrate the effective separation performance of the membrane for 1,3-butadiene (C4H6) from other C4 hydrocarbons, which is a crucial and challenging separation in the chemical industry. The membrane achieves a high permeance of C4H6 (693.00±21.83 GPU) and a high selectivity over n-butene, n-butane, isobutene, and isobutane (9.72, 9.94, 10.31, and 11.94, respectively). This strategy opens up new possibilities for developing advanced membrane materials for difficult hydrocarbon separations.

Effective C4 Separation by Zeolite Metal–Organic Framework Composite Membranes

AbstractInorganic zeolites have excellent molecular sieving properties, but they are difficult to process into macroscopic structures. In this work, we use metal–organic framework (MOF) glass as substrates to engineer the interface with inorganic zeolites, and then assemble the discrete crystalline zeolite powders into monolithic structures. The zeolites are well dispersed and stabilized within the MOF glass matrix, and the monolith has satisfactory mechanical stabilities for membrane applications. We demonstrate the effective separation performance of the membrane for 1,3‐butadiene (C4H6) from other C4 hydrocarbons, which is a crucial and challenging separation in the chemical industry. The membrane achieves a high permeance of C4H6 (693.00±21.83 GPU) and a high selectivity over n‐butene, n‐butane, isobutene, and isobutane (9.72, 9.94, 10.31, and 11.94, respectively). This strategy opens up new possibilities for developing advanced membrane materials for difficult hydrocarbon separations.

Water Promotes Melting of a Metal-Organic Framework.

Water is one of the most reactive and abundant molecules on Earth, and it is thus crucial to understand its reactivity with various material families. One of the big unknown questions is how water in liquid and vapor forms impact the fast-emerging class of metal-organic frameworks (MOFs). Here, we discover that high-pressure water vapor drastically modifies the structure and hence the dynamic, thermodynamic, and mechanical properties of MOF glasses. In detail, we find that an archetypical MOF (ZIF-62) is extremely sensitive to heat treatments performed at 460 °C and water vapor pressures up to ∼110 bar. Both the melting and glass transition temperatures decrease remarkably (by >100 °C), and simultaneously, hardness and Young's modulus increase by up to 100% under very mild treatment conditions (<20 bar of hydrothermal pressure). Structural analyses suggest water to partially coordinate to Zn in the form of a hydroxide ion by replacing a bridging imidazolate-based linker. The work provides insight into the role of hot-compressed water in influencing the structure and properties of MOF glasses and opens a new route for systematically changing the thermodynamics and kinetics of MOF liquids and thus altering the thermal and mechanical properties of the resulting MOF glasses.

Melt-quenched carboxylate metal–organic framework glasses

Although carboxylate-based frameworks are commonly used architectures in metal-organic frameworks (MOFs), liquid/glass MOFs have thus far mainly been obtained from azole- or weakly coordinating ligand-based frameworks. This is because strong coordination bonds of carboxylate ligands to metals block the thermal vitrification pathways of carboxylate-based MOFs. In this study, we present the example of carboxylate-based melt-quenched MOF glasses comprising Mg2+ or Mn2+ with an aliphatic carboxylate ligand, adipate. These MOFs have a low melting temperature (Tm) of 284 °C and 238 °C, respectively, compared to zeolitic-imidazolate framework (ZIF) glasses, and superior mechanical properties in terms of hardness and elastic modulus. The low Tm may be attributed to the flexibility and low symmetry of the aliphatic carboxylate ligand, which raises the entropy of fusion (ΔSfus), and the lack of crystal field stabilization energy on metal ions, reducing enthalpy of fusion (ΔHfus). This research will serve as a cornerstone for the integration of numerous carboxylate-based MOFs into MOF glasses.

Deciphering the controlling factors for phase transitions in zeolitic imidazolate frameworks.

Zeolitic imidazolate frameworks (ZIFs) feature complex phase transitions, including polymorphism, melting, vitrification, and polyamorphism. Experimentally probing their structural evolution during transitions involving amorphous phases is a significant challenge, especially at the medium-range length scale. To overcome this challenge, here we first train a deep learning-based force field to identify the structural characteristics of both crystalline and non-crystalline ZIF phases. This allows us to reproduce the structural evolution trend during the melting of crystals and formation of ZIF glasses at various length scales with an accuracy comparable to that of ab initio molecular dynamics, yet at a much lower computational cost. Based on this approach, we propose a new structural descriptor, namely, the ring orientation index, to capture the propensity for crystallization of ZIF-4 (Zn(Im)2, Im=C3H3N2-) glasses, as well as for the formation of ZIF-zni (Zn(Im)2) out of the high-density amorphous phase. This crystal formation process is a result of the reorientation of imidazole rings by sacrificing the order of the structure around the zinc-centered tetrahedra. The outcomes of this work are useful for studying phase transitions in other metal-organic frameworks (MOFs) and may thus guide the development of MOF glasses.

Metal-Organic Framework Glass as a Functional Filler Enables Enhanced Performance of Solid-State Polymer Electrolytes for Lithium Metal Batteries.

Polymers are promising candidates as solid-state electrolytes due to their performance and processability, but fillers play a critical role in adjusting the polymer network structure and electrochemical, thermal, and mechanical properties. Most fillers studied so far are anisotropic, limiting the possibility of homogeneous ion transport. Here, applying metal-organic framework (MOF) glass as an isotropic functional filler, solid-state polyethylene oxide (PEO) electrolytes are prepared. Calorimetric and diffusion kinetics tests show that the MOF glass addition reduces the glass transition temperature of the polymer phase, improving the mobility of the polymer chains, and thereby facilitating lithium (Li) ion transport. By also incorporating the lithium salt and ionic liquid (IL), Li-Li symmetric cell tests of the PEO-lithium salt-MOF glass-IL electrolyte reveal low overpotential, indicating low interfacial impedance. Simulations show that the isotropic structure of the MOF glass facilitates the wettability of the IL by enhancing interfacial interactions, leading to a less confined IL structure that promotes Li-ion mobility. Finally, the obtainedelectrolyte is used to construct Li-lithium iron phosphate full batteries that feature high cycle stability and rate capability. This work therefore demonstrates how an isotropic functional filler can be used to enhance the electrochemical performance of solid-state polymer electrolytes.

Boundary‐Free Metal–Organic Framework Glasses Enable Highly Stable All‐Solid‐State Lithium–Oxygen Battery

AbstractRechargeable lithium–oxygen batteries (LOBs) are considered to be one of the most promising energy storage systems. However, the use of reactive lithium (Li) metal and the formation of Li dendrites during battery operation would lead to serious safety concerns, especially when flammable liquid electrolytes are utilized. Herein, superior metal–organic framework (MOF) glass‐based solid‐state electrolytes (SSEs) is developed for stable all‐solid‐state LOBs (SSLOBs). These non‐flammable and boundary‐free MOF glass SSEs are capable of suppressing the dendrite growth and exhibiting long‐term Li stripping/plating stability, contributing to superior Li+ conductivity (5 × 10−4 S cm−1 at 20 °C), high Li+ transference number (0.86), and good electrochemical stability. It is discovered that discharge product deposition behavior in the solid‐solid interface can be well regulated by the ion/electron mixed conducted cathode fabricated with MOF glass SSEs and electronic conductive polymers. As a result, the SSLOBs can be stably recharged for 400 cycles with a low polarization gap and deliver a high capacity of 13552 mAh g−1. The development of this proposed MOF glass displays great application potential in energy storage systems with good safety and high energy density.

Evidence of Organic Polymeric Behavior in the Glass Transition of Metal-Organic Frameworks.

The origin of the glass transition is still an open debate, especially for the new class of glasses, formed from metal-organic compounds. High-temperature in situ 2H Nuclear Magnetic Resonance (NMR) experiments are performed on deuterated samples of ZIF-62 (Zn(C3H4N2)2-x(C7H6N2)x, with x=0.25 and x=0.05), the prototypical metal-organic framework glass former. Using lineshape analysis, frequencies and angular amplitudes of oscillations of the imidazolate ring during heating up to the melt progressively increasing from ≈10 to 150MHz, and from ≈5° to 25° are found. This behavior is compositionally dependent and points to the origin of the glass transition lying in organic linker movement, in a similar vein to that witnessed in some organics and contrary to the purely inorganic-based view of Metal-Organic Framework (MOF) glasses taken to date. This experimental approach shows the potential to elucidate the melting and/or decomposition process for a wide range of MOFs.

Desolvation of metal complexes to construct metal–organic framework glasses

Desolvation of metal complexes to construct metal–organic framework glasses

Cathodic Deposition of Thickness-Controllable ZIF-62 Film and Its Vitrification

Glass metal-organic framework (MOF) membrane is a newly developed material that is promising for separation works like ionic sieving and gas separation. Compared with its crystalline counterpart, the glass MOF membrane takes the advantage of its grain-boundary-free nature that greatly benefits the separation performance. However, the fabrication of the glass MOF membrane requires the pre-preparation of the mother crystalline MOF film, which remains a challenge. Taking the deposition of the iconic ZIF-62 (Zn-imidazole, melting point: 711 K) film as an example, this area remained silent until Jiang et al. reported the first example in 2018.1,2 They achieved the ZIF-62 deposition on anodic aluminum oxide (AAO) membrane by a solvothermal method. Nevertheless, this approach is limited by the low yield of the generated MOF crystals on the substrate and the time/energy-consuming process. To mitigate the existing dilemma, here we show an economic cathodic deposition approach to the preparation of ZIF-62 film with a controllable thickness. Thanks to the addition of hydrogen peroxide as a probase, the pure ZIF-62 film can be deposited without the co-deposition of metallic Zn. In the proposed deposition, a nucleation-Ostwald ripening-crystallization ternary process can be observed, which is different from the cathodic deposition of other MOF species like MOF-5. Also, it is found that the crystallinity of the deposited ZIF-62 film improves with the deposition temperature and the thickness of it can be well-tuned by the deposition time from a range of ~1 µm to ~15 µm. The cathodically deposited ZIF-62 film can be directly used as the mother material for the preparation of glass MOF membrane via a vitrification process. Systematic annealing experiments indicate that the heating temperature and dwelling time are crucial to the quality of the glass MOF membrane. At the optimized conditions (713 K, 4 hours), the dense and bulb-free glass MOF membrane with a flat surface can be obtained, which is ideal for separation works. Wang, Y.; Jin, H.; Ma, Q.; Mo, K.; Mao, H.; Feldhoff, A.; Cao, X.; Li, Y.; Pan, F.; Jiang, Z., A MOF glass membrane for gas separation. Angewandte Chemie 2020, 132 (11), 4395-4399. Bennett, T. D.; Yue, Y. Z.; Li, P.; Qiao, A.; Tao, H. Z.; Greaves, N. G.; Richards, T.; Lampronti, G. I.; Redfern, S. A. T.; Blanc, F.; Farha, O. K.; Hupp, J. T.; Cheetharm, A. K.; Keen, D. A., Melt-Quenched Glasses of Metal-Organic Frameworks. Journal of the American Chemical Society 2016, 138 (10), 3484-3492.

Medium-Range Order Structure Controls Thermal Stability of Pores in Zeolitic Imidazolate Frameworks.

Metal-organic framework (MOF) glasses have multiple potential applications, as they combine advantages of traditional glasses with those of MOFs. The melt-quenching process used to form MOF glasses typically leads to a significant decrease in porosity, but the structural origin of this thermally induced pore collapse remains largely unknown. Here, we study the melting process of three zeolitic imidazolate frameworks (ZIFs), namely ZIF-4, ZIF-62, and ZIF-76, using ab initio molecular dynamics (MD) simulations. By analyzing the MD data using topological data analysis, we show that while the three ZIF systems exhibit similar short-range order structural changes upon heating, they exhibit significant differences in their medium-range order structure. Specifically, ZIF-76 retains more of its medium-range order structures in the liquid state compared to the other glass-forming ZIF systems, which allows it to remain more porous than ZIF-4 and ZIF-62. As such, our results may aid in understanding the structural features that govern the ability to maintain porosity in the melt-quenched glassy state.

A self-supported agZIF-UC-4 glass membrane for gas separation

Metal-organic framework (MOF) membranes have become promising candidates for gas separation due to their adjustable structure, high separation performance, and environmental friendliness. However, the emergence of grain boundary defects, and interface defects between the support layer and separation layer significantly decrease the gas separation performance of MOF membranes. Herein, a self-supported ZIF (zeolitic imidazolate framework) glass membrane is fabricated, eliminating grain boundary defects and cracks through the molten-liquid phase. The fluorine-based linkers with high electronegativity and polarizability are introduced to enhance agZIF-62(a and g denote amorphous and glass, respectively) interaction of CO2 and CH4. The CO2/N2 and CH4/N2 ideal selectivity of agZIF-UC-4 membrane (fluorine-based, UC-4 named by Cambridge University) reach 36 and 6.2, respectively. In addition, the CO2 and CH4 permeance of the agZIF-UC-4 membrane with an independent separation layer and the non-grain boundary has improved to 4752 and 818 GPU, respectively. Under the mixed gas condition, agZIF-UC-4 membrane exhibits good separation performance, exceeding the 2019 Mckeown upper bond of CO2/N2. Moreover, agZIF-UC-4 membrane has good stability for CO2/N2 and CH4/N2 under continuous operation and variable pressure testing. Hence, the self-supported agZIF-UC-4 membrane is a potential candidate for preparing MOF glass membranes with good gas separation performance.

Metal-Organic Framework Crystal-Glass Composite Membranes with Preferential Permeation of Ethane.

Metal-organic framework (MOF) glass is an easy to process and self-supported amorphous material that is suitable for fabricating gas separation membranes. However, MOF glasses, such as ZIF-62 and ZIF-4 have low porosity, which makes it difficult to obtain membranes with high permeance. Here, a self-supported MOF crystal-glass composite (CGC) membrane was prepared by melt quenching a mixture of ZIF-62 as the membrane matrix and ZIF-8 as the filler. The conversion of ZIF-62 from crystal to glass and the simultaneous partial melting of ZIF-8 facilitated by the melt state of ZIF-62 make the CGC membrane monolithic, eliminating non-selective grain boundaries and improving selectivity. The thickness of CGC membrane can be adjusted to fabricate a membrane without the need of a support substrate. CGC membranes exhibit a C2H6 permeance of 41,569 gas permeation units (GPU) and a C2H6/C2H4 selectivity of 7.16. The CGC membrane has abundant pores from the glassy state of ZIF-62 and the crystalline ZIF-8, which enables high gas permeance. ZIF-8 has preferential adsorption for C2H6 and promotes C2H6 transport in the membrane, and thus the GCG membrane exhibits ultrahigh C2H6 permeance and good C2H6/C2H4 selectivity.

Computation of Finite Temperature Mechanical Properties of Zeolitic Imidazolate Framework Glasses by Molecular Dynamics

Mechanical properties of amorphous phases of metal–organic frameworks (MOFs), such as MOF glasses, are difficult to determine experimentally. Moreover, computational characterization is limited by the level of theory chosen for the description of interatomic interactions and is often computationally expensive. In this work, we have extensively investigated the computation of finite temperature mechanical properties of ZIF-4 in the crystal and glass phases. We critically assessed computational methodologies including ab initio molecular dynamics, reactive force fields, and classical force fields, based on a variety of glass models. We find that ZIF-4 glasses have a larger bulk modulus than the crystal and confirm previous studies that the density is larger for the glass phases. Moreover, we confirm in the case of zeolitic imidazolate framework (ZIF) glasses the relationship between density and bulk modulus, showing that obtaining models of correct density is key to the prediction of physical properties for these systems.

High-Porosity Metal-Organic Framework Glasses.

We report a synthetic strategy to link titanium-oxo (Ti-oxo) clusters into metal-organic framework (MOF) glasses with high porosity though the carboxylate linkage. A new series of MOF glasses was synthesized by evaporation of solution containing Ti-oxo clusters Ti16 O16 (OEt)32 , linkers, and m-cresol. The formation of carboxylate linkages between the Ti-oxo clusters and the carboxylate linkers was confirmed by Fourier-transform infrared (FT-IR) spectroscopy. The structural integrity of the Ti-oxo clusters within the glasses was evidenced by both X-ray absorption near edge structure (XANES) and 17 O magic-angle spinning (MAS) NMR. After ligand exchange and activation, the fumarate-linked MOF glass, termed Ti-Fum, showed a N2 Brunauer-Emmett-Teller (BET) surface areas of 923 m2 g-1 , nearly three times as high as the phenolate-linked MOF glass with the highest BET surface area prior to this report.

High‐Porosity Metal‐Organic Framework Glasses

AbstractWe report a synthetic strategy to link titanium‐oxo (Ti‐oxo) clusters into metal‐organic framework (MOF) glasses with high porosity though the carboxylate linkage. A new series of MOF glasses was synthesized by evaporation of solution containing Ti‐oxo clusters Ti16O16(OEt)32, linkers, and m‐cresol. The formation of carboxylate linkages between the Ti‐oxo clusters and the carboxylate linkers was confirmed by Fourier‐transform infrared (FT‐IR) spectroscopy. The structural integrity of the Ti‐oxo clusters within the glasses was evidenced by both X‐ray absorption near edge structure (XANES) and 17O magic‐angle spinning (MAS) NMR. After ligand exchange and activation, the fumarate‐linked MOF glass, termed Ti‐Fum, showed a N2 Brunauer–Emmett–Teller (BET) surface areas of 923 m2 g−1, nearly three times as high as the phenolate‐linked MOF glass with the highest BET surface area prior to this report.