Nucleophilic Catalysis Research Articles

Why Bestatin Prefers Human Carnosinase 2 (CN2) to Human Carnosinase 1 (CN1).

Human carnosinases (CNs) are Xaa-His metal-ion-activated aminopeptidases that break down bioactive carnosine and other histidine-containing dipeptides. Carnosine is a bioactive peptide found in meat and prevalently used as a supplement and in functional food formulation. Nonetheless, carnosine is digested by CNs rapidly after ingestion. CNs have two isoforms (carnosinase 1 (CN1) and carnosinase 2 (CN2)), where CN1 is the main player in carnosine digestion. CNs contain a catalytic metal ion pair (Zn2+ for CN1 and Mn2+ for CN2) and two subpockets (S1 and S1' pockets) to accommodate a substrate. Bestatin (BES) has been reported to be active for CN2; however, its inhibition ability for CN1 has remained under debate, because the underlying mechanism remains unclear. This information is important for designing novel CN1-selective inhibitors for proliferating carnosine after ingestion. Thus, molecular dynamics (MD) simulations were performed to explore the binding mechanism of BES to both CN1 and CN2. The binding of BES-CN1 and BES-CN2 was studied in comparison. The results indicated that BES could bind both CNs with different degrees of binding affinity. BES prefers CN2 because: (1) its aryl terminus is trapped by Y197 in an S1 pocket; (ii) the BES polar backbone is firmly bound by catalytic Mn2+ ions; and (iii) the S1' pocket can shrink to accommodate the isopropyl end of BES. In contrast, the high mobility of the aryl end and the complete loss of metal-BES interactions in CN1 cause a loose BES binding. Seemingly, polar termini were required for a good CN1 inhibitor.

Structure and Function of Sabinene Synthase, a Monoterpene Cyclase That Generates a Highly Strained [3.1.0] Bicyclic Product.

Sabinene is a plant natural product with a distinctive strained [3.1.0] bicyclic ring system that is used commercially as a spicy and pine-like fragrance with citrus undertones. This unusual monoterpene has also been studied as an antifungal and anti-inflammatory agent as well as a next-generation biofuel. In order to understand the molecular determinants of [3.1.0] bicyclic ring formation in sabinene biosynthesis, we now report three X-ray crystal structures of sabinene synthase from Western red cedar, Thuja plicata (TpSS), with open and partially closed active site conformations at 2.21-2.72 Å resolution. We additionally report the complete biochemical characterization of sabinene synthase, including steady-state kinetics, active site mutagenesis, and product array profiling. The catalytic metal ion requirement is unexpectedly broad for a class I terpene cyclase: optimal catalytic activity was measured using Mn2+ or Co2+, with more modest activity observed using Mg2+ or Ni2+. Kinetic parameters were determined for both full-length TpSS and a deletion variant lacking the putative N-terminal plastidial targeting sequence, designated ΔTpSS. Monoterpene product profiles for both indicated similar product arrays independent of the catalytic metal ion used, with sabinene comprising nearly 90% of the total products generated. Site-directed mutagenesis was utilized to probe the function of active site residues, and several mutants yielded altered product arrays. Most notably, the G458A substitution converted ΔTpSS into a high-activity α-pinene synthase. α-Pinene contains a bicyclic [3.1.1] ring system; structural and mechanistic analyses suggest a molecular rationale for the reprogrammed transannulation reaction, leading to the alternative bicyclic product.

X-ray Induced Cycling of Rare-Earth Elements between Bulk and Interfacial Liquid.

Reversible cycling of rare-earth elements between an aqueous electrolyte solution and its free surface is achieved by X-ray exposure. This exposure alters the competitive equilibrium between lanthanide ions bound to a chelating ligand, diethylenetriamine pentaacetic acid (DTPA), in the bulk solution and to insoluble monolayers of extractant di-hexadecyl phosphoric acid (DHDP) at its surface. Evidence for the exposure-induced temporal variations in the lanthanide surface density is provided by X-ray fluorescence near total reflection measurements. Comparison of results when X-rays are confined to the aqueous surface region to results when X-rays transmit into the bulk solution suggests the importance of aqueous radiolysis in the adsorption cycle. Amine binding sites in DTPA are identified as a likely target of radiolysis products. The molecules DTPA and DHDP are like those used in the separation of lanthanides from ores and in the reprocessing of nuclear fuel. These results suggest that an external source of X-rays can be used to drive rare-earth element separations. More generally, use of X-rays to controllably dose a liquid interface with lanthanides could trigger a range of interfacial processes, including enhanced metal ion extraction, catalysis, and materials synthesis.

Halogen and Chalcogen Activation by Nucleophilic Catalysis.

The high utility of halogenated organic compounds has prompted the development of numerous transformations that install the carbon-halogen motif. Halogen functionalities, deemed as "functional and functionalizable" molecules due to their capacity to modulate diverse internal properties, constitute a pivotal strategy in drug discovery and development. Traditional routes to these building blocks have commonly involved multiple steps, harsh reaction conditions, and the use of stoichiometric and/or toxic reagents. With the emergence of solid halogen carriers such as N-halosuccinimides, and halohydantoins as popular sources of halonium ions, the past decade has witnessed enormous growth in the development of new catalytic strategies for halofunctionalization. This review aims to provide a nuanced perspective on nucleophilic activators and their roles in halogen activation. It will highlight critical discoveries in effecting racemic and asymmetric variants of these reactions, driven by the development of new catalysts, activation modes, and improved understanding of chemical reactivity and reaction kinetics.

Metal Ion Binding to Human Glutaminyl Cyclase: A Structural Perspective.

Glutaminyl-peptide cyclotransferases (QCs) convert the N-terminal glutamine or glutamate residues of protein and peptide substrates into pyroglutamate (pE) by releasing ammonia or a water molecule. The N-terminal pE modification protects peptides/proteins against proteolytic degradation by amino- or exopeptidases, increasing their stability. Mammalian QC is abundant in the brain and a large amount of evidence indicates that pE peptides are involved in the onset of neural human pathologies such as Alzheimer's and Huntington's disease and synucleinopathies. Hence, human QC (hQC) has become an intensively studied target for drug development against these diseases. Soon after its characterization, hQC was identified as a Zn-dependent enzyme, but a partial restoration of the enzyme activity in the presence of the Co(II) ion was also reported, suggesting a possible role of this metal ion in catalysis. The present work aims to investigate the structure of demetallated hQC and of the reconstituted enzyme with Zn(II) and Co(II) and their behavior in the presence of known inhibitors. Furthermore, our structural determinations provide a possible explanation for the presence of the mononuclear metal binding site of hQC, despite the presence of the same conserved metal binding motifs present in distantly related dinuclear aminopeptidase enzymes.

Alterations to the catalytic properties of methylketone synthase 2 from eggplant (Solanum melongena) by mutating the conserved aspartate into glutamate

Methylketone synthase 2 (MKS2) has been widely found in the plant kingdom and identified as a single-hotdog-fold acyl-lipid thioesterase (ALT) which mainly hydrolyzes the thioester bond in 3-ketoacyl-acyl carrier protein (3-ketoacyl-ACP) intermediates of the fatty acid biosynthetic pathway into free 3-keto fatty acids. Our previous study identified SmMKS2–2 as one of two functional ALTs in eggplant Solanum melongena. To gain mechanistic insights into catalysis by this enzyme, we herein combined biochemical and in silico structural analyses on SmMKS2–2. While SmMKS2–2 is capable of producing a wide range of 3-ketoacids from corresponding 3-ketoacyl-ACP substrates, SmMKS2–2-D77E mutant variant drops its thioesterase activity to the undetectable level. Consistently, the structural modelling of the D77E mutant displays that the orientation of the side chain carboxylate group of the replacing amino acid has been shifted compared to that of the native residue, resulting in smaller surface area of binding pocket that would dismiss nucleophilic catalysis of the mutant protein. Together, these data suggested that D77 is critical and specific for SmMKS2–2 to hydrolyze the thioester bond of acyl-ACP.

Simulations predict preferred Mg2+ coordination in a nonenzymatic primer-extension reaction center

The mechanism by which genetic information was copied prior to the evolution of ribozymes is of great interest because of its importance to the origin of life. The most effective known process for the nonenzymatic copying of an RNA template is primer extension by a two-step pathway in which 2-aminoimidazole-activated nucleotides first react with each other to form an imidazolium-bridged intermediate that subsequently reacts with the primer. Reaction kinetics, structure-activity relationships, and X-ray crystallography have provided insight into the overall reaction mechanism, but many puzzles remain. In particular, high concentrations of Mg2+ are required for efficient primer extension, but the mechanism by which Mg2+ accelerates primer extension remains unknown. By analogy with the mechanism of DNA and RNA polymerases, a role for Mg2+ in facilitating the deprotonation of the primer 3′-hydroxyl is often assumed, but no catalytic metal ion is seen in crystal structures of the primer-extension complex. To explore the potential effects of Mg2+ binding in the reaction center, we performed atomistic molecular dynamics simulations of a series of modeled complexes in which a Mg2+ ion was placed in the reaction center with inner-sphere coordination with different sets of functional groups. Our simulations suggest that coordination of a Mg2+ ion with both O3′ of the terminal primer nucleotide and the pro-Sp nonbridging oxygen of the reactive phosphate of an imidazolium-bridged dinucleotide would help to pre-organize the structure of the primer/template substrate complex to favor the primer-extension reaction. Our results suggest that the catalytic metal ion may play an important role in overcoming electrostatic repulsion between a deprotonated O3′ and the reactive phosphate of the bridged dinucleotide and lead to testable predictions of the mode of Mg2+ binding that is most relevant to catalysis of primer extension.

Efficient E/Z conversion of (all-E)-lycopene to Z-isomers with a high proportion of (5Z)-lycopene by food grade plant extracts

The conversion of lycopene from natural sources, mainly in all trans configurations, to cis configuration means a significant increase in bioavailability. However, the existing isomerization methods have problems with residual organic solvents, which limits the use of products. such as metal ion catalysis, electrocatalysis, and iodine-doped titanium dioxide (I–TiO2) catalysis. In this paper, the effects of common plant extracts on lycopene isomerization and its stability were investigated. Among them, sulforaphane and allicin showed significant catalytic effects, with sulforaphane being the most effective. Therefore, Broccoli sprouts were selected as a food component to investigate the catalytic isomerization of lycopene. After the optimization of pretreatment, the final content of sulforaphane was 5.81 mg/g. The cis-proportion of lycopene was elevated from 5% in the blank group to more than 60% when the treated broccoli sprout paste was added to the tomato paste. Also, the bioavailability of lycopene increased significantly with the increase in cis proportion. Compared with other isomerization methods, the method studied in this paper does not require any organic reagents and only uses food-grade materials such as allicin, sulforaphane, and broccoli sprouts to catalyze the cis-trans isomerization of lycopene.

Catalytic Metal Ion-Substrate Coordination during Nonenzymatic RNA Primer Extension.

Nonenzymatic template-directed RNA copying requires catalysis by divalent metal ions. The primer extension reaction involves the attack of the primer 3'-hydroxyl on the adjacent phosphate of a 5'-5'-imidazolium-bridged dinucleotide substrate. However, the nature of the interaction of the catalytic metal ion with the reaction center remains unclear. To explore the coordination of the catalytic metal ion with the imidazolium-bridged dinucleotide substrate, we examined catalysis by oxophilic and thiophilic metal ions with both diastereomers of phosphorothioate-modified substrates. We show that Mg2+ and Cd2+ exhibit opposite preferences for the two phosphorothioate substrate diastereomers, indicating a stereospecific interaction of the divalent cation with one of the nonbridging phosphorus substituents. High-resolution X-ray crystal structures of the products of primer extension with phosphorothioate substrates reveal the absolute stereochemistry of this interaction and indicate that catalysis by Mg2+ involves inner-sphere coordination with the nonbridging phosphate oxygen in the pro-SP position, while thiophilic cadmium ions interact with sulfur in the same position, as in one of the two phosphorothioate substrates. These results collectively suggest that during nonenzymatic RNA primer extension with a 5'-5'-imidazolium-bridged dinucleotide substrate the interaction of the catalytic Mg2+ ion with the pro-SP oxygen of the reactive phosphate plays a crucial role in the metal-catalyzed SN2(P) reaction.

Reconstruction of solvation structure at the cathode-electrolyte interface via partial de-solvation in a metal-organic framework

The formation of cathode-electrolyte interphase (CEI) is closely related to the solvation structure in direct contact with the cathode. The de-solvated solvent molecules are subject to the attack of highly catalytic transition metal ions in the cathode materials (such as Ni-rich LiNi0.8Co0.1Mn0.1O2, Ni-rich NCM), especially at high voltage or high temperature, leading to the poor CEI structure that accelerates the deterioration of rechargeable batteries. Considerable strategies have been proposed to solve this issue. Herein, we have constructed a porous Mg-MOF buffer layer on the surface of Ni-rich NCM, which not only greatly reduces the contact between solvent molecules and cathodes to alleviate the extensive interface reactions, but also promote the de-solvation of Li+ solvation structure through strong affinity between solvents and Mg2+. The partially de-solvated structure induces the anion to participate in the solvation structure and contributes to the formation of a uniform LiF-rich CEI with superior mechanical integrity and chemical stability. Therefore, the NCM with Mg-MOF buffer layer exhibits improved cycling stability at both elevated temperature of 45 °C and high voltage of 4.5 V with lithium as anode. Moreover, the modified NCM/graphite full cells also deliver ultra-stable rechargeable capability with a remarkable capacity retention of 87.3% over 1000 cycles as compared to the only 21.7% of pristine NCM based cells.

Atmospheric environment characteristic of severe dust storms and its impact on sulfate formation in downstream city

This study comprehensively investigated the impact of dust storms (DSs) on downstream cities, by selecting representative DS events. In this paper, we discussed the characteristics of meteorological conditions, air pollutants, PM2.5 components, and their influence on sulfate formation mechanisms. During DSs, strong winds, reaching speeds of up to 10 m/s, led to significant increases in PM10 and PM2.5, with maximum concentrations of 2684.5 and 429 μg/m3, respectively. Primary gaseous pollutants experienced substantial reductions, with decline rates of 48.1, 34.9, 36.8, and 9.0 % for SO2, NO2, NH3, and CO, respectively. Despite a notable increase in PM2.5 concentrations, only 7.6 % of the total mass of PM2.5 was attributed to ionic and carbonaceous components, a much lower value than observed before the DSs (77.3 %). Concentrations of Fe, Ti, and Mn exhibited increases by factors of 6.5–14.1, 10.4–17.0, and 1.6–4.7, respectively. In contrast to the significant decrease of >76.2 % in nitrogen oxidation ratio (NOR), sulfur oxidation ratio (SOR) remained at a relatively high level, displaying a strong positive correlation with high concentrations of Fe, Mn, and Ti. Quantitative analysis revealed an average increase of 0.187 and 0.045 μg/m3 in sulfate from natural sources and heterogeneous generation, respectively. The heterogeneous reaction on mineral dust was closely linked to atmospheric humidity, radiation intensity, the form of metal existence, and concentrations of it. High concentrations of titanium dioxide and iron‑manganese oxides in mineral dust promoted heterogeneous oxidation of SO2 through photocatalysis during the daytime and metal ion catalysis during the nighttime. This study establishes that the metal components in mineral dust promote heterogeneous sulfate formation, quantifies the yield of sulfate generated as a result, and provides possible mechanisms for heterogeneous sulfate formation.

Enantioselective Synthesis of 3‐Allylindoles from Indolin‐2‐imines and MBH Carbonates via Nucleophilic Catalysis

AbstractWith chiral amine (DHQD)2PHAL as nucleophilic catalyst, asymmetric synthesis of enantioenriched 3‐allylindoles was achieved from indolone‐2‐imines and MBH carbonates. Compared with our previous chiral phosphine catalysis, the chiral amine had exactly the opposite effect in terms of enantioselectivity. Importantly, we could obtain each enantiomer by adjusting the catalyst system.

Nanomedicine for combination of chemodynamic therapy and immunotherapy of cancers.

Chemodynamic therapy (CDT), as a new type of therapy, has received more and more attention in the field of tumor therapy in recent years. By virtue of the characteristics of weak acidity and excess H2O2 in the tumor microenvironment, CDT uses the Fenton or Fenton-like reactions to catalyze the transformation of H2O2 into strongly oxidizing ˙OH, resulting in increased intracellular oxidative stress for lipid oxidation, protein inactivation, or DNA damage, and finally inducing apoptosis of cancer cells. In particular, CDT has the advantage of tumor specificity. However, the therapeutic efficacy of CDT frequently depends on the catalytic efficiency of the Fenton reaction, which needs the presence of sufficient H2O2 and catalytic metal ions. Relatively low concentrations of H2O2 and the lack of catalytic metal ions usually limit the final therapeutic effect. The combination of CDT with immunotherapy will be an effective means to improve the therapeutic effect. In this review paper, the recent progress related to nanomedicine for the combination of CDT and immunotherapy is summarized. Immunogenic death of tumor cells, immune checkpoint inhibitors, and stimulator of interferon gene (STING) activation as the main immunotherapy strategies to combine with CDT are discussed. Finally, the challenges and prospects for the clinical translation and future development direction are discussed.

DMAP-promoted oxidative functionalization of α-amino ketones via oxygen delivery from water/alcohols.

This paper shows a novel oxidative functionalization of α-amino ketones to yield the corresponding α-ketoamides and α-acylimidates. The reaction proceeds via oxygen delivery from water/alcohols in conjunction with an electron acceptor and 4-dimethylaminopyridine (DMAP). Mechanistic study indicates that DMAP exhibits a dual function of nucleophilic catalysis and proton abstraction.

Influence of the Weak Nuclear Force on Metal-Promoted Autocatalytic Strecker Synthesis of Amino Acids: Formation of a Chiral Pool of Precursors for Prebiotic Peptide and Protein Synthesis.

Natural chiral amino acids typically adopt an L structural configuration. While a preference for specific molecular chiralities is observed throughout biology and cellular chemistry, the origins of this preference are unclear. In a previous report the origin of enantiomeric selectivity was analyzed in terms of an "RNA World" model, and a pathway to a chiral preference for d-ribose was proposed based on the autocatalytic transformation of glyceraldehyde as a precursor to the formation of sugars. Metal-ion-promoted catalysis allows the parity non-conserving (PNC) weak nuclear interaction to influence the chirality of a nascent chiral carbon center. Since the PNC effect is the only natural property with an inherent handedness, it is an obvious candidate to influence enantiomeric preference from a catalytic reaction performed over geologically relevant time scales. The PNC influence requires and emphasizes the important role of catalytic metal ions in primordial chemistry. In this study, the impact of geologically available divalent calcium and higher Z alkaline earth elements are examined as mediators of chiral preference. Detailed calculations of the magnitude of the effect are presented, including the influence of time, temperature, pH, and metal ion identity. It is concluded that metal ions can direct chiral preference for amino acid synthesis via a metal-promoted autocatalytic Strecker reaction within a relatively short geological timeframe, thereby providing a pool of l-amino acids for catalytic chemistry evolving either from an RNA-world model of molecular evolution or alternative pathways to protein synthesis.

Multiple Sulfur Isotopic Evidence for Sulfate Formation in Haze Pollution.

The mechanism of sulfate formation during winter haze events in North China remains largely elusive. In this study, the multiple sulfur isotopic composition of sulfate in different grain-size aerosol fractions collected seasonally from sampling sites in rural, suburban, urban, industrial, and coastal areas of North China are used to constrain the mechanism of SO2 oxidation at different levels of air pollution. The Δ33S values of sulfate in aerosols show an obvious seasonal variation, except for those samples collected in the rural area. The positive Δ33S signatures (0‰ < Δ33S < 0.439‰) observed on clean days are mainly influenced by tropospheric SO2 oxidation and stratospheric SO2 photolysis. The negative Δ33S signatures (-0.236‰ < Δ33S < ∼0‰) observed during winter haze events (PM2.5 > 200 μg/m3) are mainly attributed to SO2 oxidation by H2O2 and transition metal ion catalysis (TMI) in the troposphere. These results reveal that both the H2O2 and TMI pathways play critical roles in sulfate formation during haze events in North China. Additionally, these new data provide evidence that the tropospheric oxidation of SO2 can produce significant negative Δ33S values in sulfate aerosols.

Phenol decomposition by gas–liquid phase discharge treatment with different metal electrodes: A comparison study

In recent years, non-thermal plasma technology as an advanced oxidation process has received increasing attention for wastewater treatment. In previous studies, the discussion about the effects caused by different metal electrodes in the plasma treatment system is limited. In this work, phenol degradation efficiency and H2O2 formation with Al, Ti, Fe, Ni, Cu, W, and Mo electrodes were investigated. The use of Fe, Ni, and Al electrodes results in higher phenol removal, than that using W, Cu, Mo, and Ti electrodes. After 70 min of discharge treatment, phenol was continuously decomposed in the solution in the Fe, Cu, and Mo electrodes systems. High peak voltage promoted phenol degradation and H2O2 generation, especially for Fe, Ti and Ni electrodes. The alkaline condition is more conducive to phenol degradation than the neutral and acidic conditions regardless of the electrode type. Fe, Al, Cu, and Ni electrodes are affected more by the adjustment of the conductivity with Cl− than that with SO42−. The dominant influence on H2O2 production and decomposition could be attributed to the catalysis of metal particles and metal ions produced by electrode erosion. According to the radical quenching experiments, the main radicals in the degradation of phenol when using each electrode material were analyzed.

Assembly drives regioselective azide-alkyne cycloaddition reaction

Azide-alkyne cycloaddition reaction is a very common organic reaction to synthesize nitrogen-containing heterocycles. Once catalyzed by Cu(I) or Ru(II), it turns out to be a click reaction and thus is widely applied in chemical biology for labeling. However, besides their poor regioselectivity towards this reaction, these metal ions are not biologically friendly. Hence, it is an urgent need to develop a metal-free azide–alkyne cycloaddition reaction for biomedical applications. In this work, we found that, in the absence of metal ions, supramolecular self-assembly in an aqueous solution could realize this reaction with excellent regioselectivity. Nap-Phe-Phe-Lys(azido)-OH firstly self-assembled into nanofibers. Then, Nap-Phe-Phe-Gly(alkynyl)-OH at equivalent concentration approached to react with the assembly to yield the cycloaddition product Nap-Phe-Phe-Lys(triazole)-Gly-Phe-Phe-Nap to form nanoribbons. Due to space confinement effect, the product was obtained with excellent regioselectivity. Employing the excellent properties of supramolecular self-assembly, we are applying this strategy to realize more reactions without metal ion catalysis.

Bifunctional Onium and Potassium Iodides as Nucleophilic Catalysts for the Solvent-Free Syntheses of Carbonates, Thiocarbonates, and Oxazolidinones from Epoxides.

The catalytic potential of organo-onium iodides as nucleophilic catalysts is aptly demonstrated in the synthesis of cyclic carbonates from epoxides and carbon dioxide (CO2 ), as a representative CO2 utilization reaction. Although organo-onium iodide nucleophilic catalysts are metal-free environmentally benign catalysts, harsh reaction conditions are generally required to efficiently promote the coupling reactions of epoxides and CO2 . To solve this problem and accomplish efficient CO2 utilization reactions under mild conditions, bifunctional onium iodide nucleophilic catalysts bearing a hydrogen bond donor moiety were developed by our research group. Based on the successful bifunctional design of the onium iodide catalysts, nucleophilic catalysis using a potassium iodide (KI)-tetraethylene glycol complex was also investigated in coupling reactions of epoxides and CO2 under mild reaction conditions. These effective bifunctional onium and potassium iodide nucleophilic catalysts were applied to the solvent-free syntheses of 2-oxazolidinones and cyclic thiocarbonates from epoxides.

Prebiotic Synthesis of Aspartate Using Life's Metabolism as a Guide.

A protometabolic approach to the origins of life assumes that the conserved biochemistry of metabolism has direct continuity with prebiotic chemistry. One of the most important amino acids in modern biology is aspartic acid, serving as a nodal metabolite for the synthesis of many other essential biomolecules. Aspartate's prebiotic synthesis is complicated by the instability of its precursor, oxaloacetate. In this paper, we show that the use of the biologically relevant cofactor pyridoxamine, supported by metal ion catalysis, is sufficiently fast to offset oxaloacetate's degradation. Cu2+-catalysed transamination of oxaloacetate by pyridoxamine achieves around a 5% yield within 1 h, and can operate across a broad range of pH, temperature, and pressure. In addition, the synthesis of the downstream product β-alanine may also take place in the same reaction system at very low yields, directly mimicking an archaeal synthesis route. Amino group transfer supported by pyridoxal is shown to take place from aspartate to alanine, but the reverse reaction (alanine to aspartate) shows a poor yield. Overall, our results show that the nodal metabolite aspartate and related amino acids can indeed be synthesised via protometabolic pathways that foreshadow modern metabolism in the presence of the simple cofactor pyridoxamine and metal ions.