Oxidation State Research Articles

The chemical composition of secondary organic aerosols regulates transcriptomic and metabolomic signaling in an epithelial-endothelial in vitro coculture

BackgroundThe formation of secondary organic aerosols (SOA) by atmospheric oxidation reactions substantially contributes to the burden of fine particulate matter (PM2.5), which has been associated with adverse health effects (e.g., cardiovascular diseases). However, the molecular and cellular effects of atmospheric aging on aerosol toxicity have not been fully elucidated, especially in model systems that enable cell-to-cell signaling.MethodsIn this study, we aimed to elucidate the complexity of atmospheric aerosol toxicology by exposing a coculture model system consisting of an alveolar (A549) and an endothelial (EA.hy926) cell line seeded in a 3D orientation at the air‒liquid interface for 4 h to model aerosols. Simulation of atmospheric aging was performed on volatile biogenic (β-pinene) or anthropogenic (naphthalene) precursors of SOA condensing on soot particles. The similar physical properties for both SOA, but distinct differences in chemical composition (e.g., aromatic compounds, oxidation state, unsaturated carbonyls) enabled to determine specifically induced toxic effects of SOA.ResultsIn A549 cells, exposure to naphthalene-derived SOA induced stress-related airway remodeling and an early type I immune response to a greater extent. Transcriptomic analysis of EA.hy926 cells not directly exposed to aerosol and integration with metabolome data indicated generalized systemic effects resulting from the activation of early response genes and the involvement of cardiovascular disease (CVD) -related pathways, such as the intracellular signal transduction pathway (PI3K/AKT) and pathways associated with endothelial dysfunction (iNOS; PDGF). Greater induction following anthropogenic SOA exposure might be causative for the observed secondary genotoxicity.ConclusionOur findings revealed that the specific effects of SOA on directly exposed epithelial cells are highly dependent on the chemical identity, whereas non directly exposed endothelial cells exhibit more generalized systemic effects with the activation of early stress response genes and the involvement of CVD-related pathways. However, a greater correlation was made between the exposure to the anthropogenic SOA compared to the biogenic SOA. In summary, our study highlights the importance of chemical aerosol composition and the use of cell systems with cell-to-cell interplay on toxicological outcomes.Graphical

Coupling between the photoactivity and CO2 adsorption on rapidly thermal hydrogenated vs. conventionally annealed copper oxides deposited on TiO2 nanotubes

AbstractHighly ordered spaced titanium dioxide nanotubes were fabricated via electrochemical anodization and modified with titania nanoparticles and copper oxides. Such materials were rapidly annealed in hydrogen atmosphere or conventionally in a tube furnace in air, in which the temperature slowly increases. Applied synthesis procedure can be considered as simple, cost-effective, and environmentally friendly as it allows for reduction in used materials and enhances sustainable engineering. Manipulating the chemical composition of materials by different thermal treatments resulted in various photoelectrochemical activities and density of CO2 adsorption sites. Rapidly annealed nanotubes decorated by copper oxides exhibit excellent electrochemical properties where one electrode combines both: solar to electricity conversion (photocurrent under visible light 30 µA/cm2) and CO2 adsorption systems (18 times higher current after CO2 saturation). Rapidly thermal hydrogenated TiO2 nanotubes with copper oxides had 17 times higher photocurrent and wider absorption band (380–780 nm) than conventionally annealed ones. Furthermore, the crystal planes such as Cu (111), Cu (220), Cu2O (110), CuO (002) and Cu0, Cu+, Cu2+ oxidation states, and oxygen vacancies were recognized for hydrogenated sample. It should be highlighted that thermal annealing conditions significantly affects ability of copper oxide to CO2 adsorption and CO2 reduction reaction for hydrogenated electrode. Graphical abstract

P-Aryl-Substituted Iminopyridine Chromium Complexes as Precatalysts for Ethylene Polymerization: The Question of the Physical Oxidation State Examined by Experimental and Density Functional Study in the Absence of Structural Data

<i>p</i>-Aryl-Substituted Iminopyridine Chromium Complexes as Precatalysts for Ethylene Polymerization: The Question of the Physical Oxidation State Examined by Experimental and Density Functional Study in the Absence of Structural Data

Substitutional Cu doping at the cation sites in Ba2YNbO6 toward improved visible-light photoactivity—A first-principles HSE06 study

Artificial photosynthesis holds immense promise for sustainable clean energy harvesting, with recent strides in material engineering with the earth abundant elements enabling efficient utilization of the visible solar spectrum for photoelectrochemical catalytic water splitting. Here, we have investigated the impact of substitutional Cu doping at all three cation sites in Ba2YNbO6 (BYN) using density functional theory calculations at the Heyd-Scuseria-Ernzerhof-06 level. One of the key findings is that the defect formation energy follows the hierarchy Nb &amp;gt; Ba &amp;gt; Y. The presence of an oxygen vacancy (OV) enhances the co-solubility of Cu substitution of Nb, particularly when placed outside the CuO6 unit, while it has a contrary effect for Y substitution. Cu replacement reduces the bandgap as Nb &amp;gt; Y ≫ Ba vis-à-vis pure BYN, while extending it into the visible part of the solar spectrum for Nb and Y replacement cases, albeit with OV causing a slight blue shift to them, without reducing the oxidation state of Cu due to strong charge-delocalization. Cu doping at Y and Nb sites retains the direct band transition character of BYN, a feature removed by OV. While all the bare Cu doped systems exhibit formation of a weak electron polaron, the placement of OV tends to annihilate this except for the system comprising first nearest neighbor placement of an OV relative to the Cu substitution at an Nb site. Notably, Cu doping at the Nb site significantly enhances optical activity, particularly ∼2.0–2.5 eV, resulting in promising candidates for photoelectrochemical catalysts.

Unveiling the Unique Reactivity of Anionic Mn(I) Complexes via Metal-Ligand Cooperation: Nucleophilic Attack on C(sp3)-X Bonds.

Metal-ligand cooperation (MLC) has emerged as a pivotal strategy for the catalytic activation of small molecules within both synthetic and biological arenas. Leveraging this approach, a suite of potent catalytic reactions─encompassing hydrogenation, hydroelementation, and dehydrogenative processes─have been realized, with notable advances in manganese catalysis in recent years. However, the activation of alkyl halides by Mn complexes, which typically requires strong reductants to form Mn(-I) complexes that are incompatible with standard cross-coupling conditions, remains a significant challenge. This limitation underscores the urgent need to investigate alternative methods for activating C(sp3)-X bonds using higher valence state Mn complexes. In response to this challenge, we present the synthesis, characterization, and reactivity of a new anionic Mn(I) complex featuring a redox-active dianionic ligand that induces multiple MLC functionalities. We have discovered an innovative mechanism of MLC, characterized by a single ligand transferring two electrons to the metal center. This novel process facilitates an orbital-symmetry-allowed nucleophilic attack on C(sp3)-X bonds, preserving manganese's oxidative state at +1. To the best of our knowledge, this is the first instance where the MLC strategy via a two-electron transfer process has been utilized to execute an SN2 nucleophilic attack at a C(sp3)-X bond by a relatively electron-deficient metal center like Mn(I). Additionally, the dianionic ligand of the anionic Mn(I) complex exhibits ambident nucleophilicity by reacting with different electrophiles, further highlighting its versatile reactivity.

Ellman's Assay on the Surface: Thiol Quantification of Human Cofilin-1 Protein through Surface Plasmon Resonance.

Oxidative stress on cysteine (Cys)-containing proteins has been associated with physiological disorders, as suggested for the human cofilin-1 (CFL-1) protein, in which the oxidized residues are likely implicated in the aggregation process of α-synuclein, leading to severe neuronal injuries. Considering the relevance of the oxidation state of cysteine, quantification of thiols may offer a guide for the development of effective therapies. This work presents, for the very first time, thiol quantification within CFL-1 in solution and on the surface following classic and adapted versions of Ellman's assay. The 1:1 stoichiometric Ellman's reaction occurs between 5,5'-dithio-bis(2-nitrobenzoic acid) (DTNB), and the free thiol of the cysteine residue, producing two 2-nitro-5-thiobenzoate (TNB2-) ions, one of which is released into the medium. While in solution, the thiol concentration was determined by the absorbance of the released TNB2-, on the surface, the mass of the attached TNB2- ion to the protein allowed the quantification by means of the multiparametric surface plasmon resonance (MP-SPR) technique. The SPR angle change after the interaction of DTNB with immobilized CFL-1 gave a surface coverage of 26.5 pmol cm-2 for the TNB2- ions (ΓTNB2-). The ratio of this value to the surface coverage of CFL-1, ΓCFL-1 = 6.5 ± 0.6 pmol cm-2 (also determined by MP-SPR), gave 4.1 as expected for this protein, i.e., CFL-1 contains four Cys residues in its native form (reduced state). A control experiment with adsorbed oxidized protein showed no SPR angle change, thus proving the reliability of adapting Ellman's assay to the surface using the MP-SPR technique. The results presented in this work provide evidence of the heterogenization of Ellman's assay, offering a novel perspective for studying thiol-containing species within proteins. This may be particularly useful to ensure further studies on drug-like molecules that can be carried out with validated oxidized or reduced CFL-1 or other analogous systems.

Construction of "Metal Defect/Oxygen Defect Junction" in ZnFe2O4-NiCo2O4 Heterostructures for Enhancing Electrocatalytic Oxygen Evolution.

Defect engineering is a promising approach to improve the conductivity and increase the active sites of transition metal oxides used as catalysts for the oxygen evolution reaction (OER). However, when metal defects and oxygen defects coexist closely within the same crystal, their compensating charges can diminish the benefits of both defect structures on the catalyst's local electronic structure. To address this limitation, a novel strategy that employs the heterostructure interface of ZnFe2O4-NiCo2O4 to spatially separate the metal defects from the oxygen defects is proposed. This configuration positions the two types of defects on opposite sides of the heterojunction interface, creating a unique structure termed the "metal-defect/oxygen-defect junction". Physical characterization and simulations reveal that this configuration enhances electron transfer at the heterostructure interface, increases the oxidation state of Fe on the catalyst surface, and boosts bulk charge carrier concentration. These improvements enhance active site performance, facilitating hydroxyl adsorption and deprotonation, thereby reducing the overpotential required for the OER.

Prediction of the Cu oxidation state from EELS and XAS spectra using supervised machine learning

Electron energy loss spectroscopy (EELS) and X-ray absorption spectroscopy (XAS) provide detailed information about bonding, distributions and locations of atoms, and their coordination numbers and oxidation states. However, analysis of XAS/EELS data often relies on matching an unknown experimental sample to a series of simulated or experimental standard samples. This limits analysis throughput and the ability to extract quantitative information from a sample. In this work, we have trained a random forest model capable of predicting the oxidation state of copper based on its L-edge spectrum. Our model attains an R2 score of 0.85 and a root mean square error of 0.24 on simulated data. It has also successfully predicted experimental L-edge EELS spectra taken in this work and XAS spectra extracted from the literature. We further demonstrate the utility of this model by predicting simulated and experimental spectra of mixed valence samples generated by this work. This model can be integrated into a real-time EELS/XAS analysis pipeline on mixtures of copper-containing materials of unknown composition and oxidation state. By expanding the training data, this methodology can be extended to data-driven spectral analysis of a broad range of materials.

Effect of iron oxidation state on the catalytic performance of Fe/C in liquid phase flow hydrogenation of 2-butyne-1,4-diol

Cis-2-butene-1,4-diol and 1,4-butanediol are crucial precursors in producing bioplastics and biodegradable plastics. Moreover, cis-2-butene-1,4-diol is used in the production of vitamins A and B6, fungicides and insecticides. On an industrial scale, they are produced by hydrogenation of 2-butyne-1,4-diol with Ni Raney as catalyst at > 160 °C and > 15 MPa. Herein, the effect of mesoporous carbon, iron loading (2, 6, 10 and 14 wt%), and metal oxidation state on the activity and selectivity of iron catalysts in the liquid phase continuous flow 2-butyne-1,4-diol hydrogenation at mild conditions (at temperature range 10–65 °C and pressure range 1–20 bar) was performed. Catalytic investigations supported by statistical modeling and physicochemical characterization (TPR, H2-TPD, physisorption, TEM, XPS, and Mössbauer spectroscopy), showed that the activity of the Fe/C can be determined by the presence of functional groups in mesoporous support which are responsible for high metal dispersion and strong metal-support interaction, which boosts the catalytic activity of iron catalysts. Additionally, the formation of metastable iron carbides which are active in hydrogenation cannot be excluded. All of the catalysts showed 100% selectivity toward cis-2-butene-1,4-diol at the lowest temperature. However, the best compromise between selectivity and activity (TOF=336 h−1) was achieved with 2 wt% Fe at 1 bar and 25 °C.

Neptunyl Pyrrophen Complexes: Exploring Schiff base chemistry with multidentate acyclic ligands and transuranics.

. We report the synthesis, structure, and characterization of two novel neptunyl complexes (NpO2L1 and NpO2L2) constructed from phenylene-substituted benzyl ester bis(pyrrole)phenylenediamine (named "pyrrophen") ligands. In both cases, the neptunium center exists in the +6 oxidation state, . As our specific interest is in exploring the chemistry of neptunium compounds containing the linear neptunyl ion (NpO22+) through equatorially coordinating the metal by multidentate organic ligands, we have identified the differences that are likely to cause discrepancy between the two complexes by examining the ions and their coordinative environments through single-crystal X-ray crystallography, diffuse reflectance,, and Raman spectroscopy. This is the first time pyrrophen has been utilized in Np chemistry and demonstrates a new platform to study 5f electron participation and coordination.

Reduktive Eliminierung von Tetraalkylcupraten [MenCu(CF3)4−n]− (n=0–4): jenseits einfacher Oxidationsstufen

AbstractIn den letzten Jahren haben Organocuprate im Allgemeinen und der Komplex [Cu(CF3)4]− im Besonderen wegen ihrer elektronischen Strukturen erhebliches Interesse auf sich gezogen. Obwohl der Reaktivität dieser Spezies in diesem Zusammenhang eine Schlüsselrolle zukommen dürfte, fand dieser Aspekt bisher nur wenig Beachtung. Wir untersuchen hier systematisch die Reihe der Tetraalkylcuprate [MenCu(CF3)4−n]− und ihre Gasphasenreaktivität, die sowohl konzertierte reduktive Eliminierungen als auch Radikalverluste umfasst. Mit Hilfe quantenchemischer Rechnungen charakterisieren wir die elektronischen Strukturen der Komplexe und zeigen, wie sie mit der Reaktivität zusammenhängen. Wir finden, dass alle Ionen [MenCu(CF3)4−n]− invertierte Ligandenfelder aufweisen und dass sich die unterschiedlichen Reaktivitäten der individuellen Komplexe aus dem Zusammenspiel verschiedener Effekte ergeben.

Investigating the effect of limited spectral information on NIRS-derived changes in hemoglobin and cytochrome-c-oxidase concentration with a diffusion-based model

This paper investigates the theoretical capability of near-infrared spectroscopy (NIRS) systems to accurately measure changes in the oxidation state of cerebral cytochrome-c-oxidase (CCO) alongside the hemoglobins, for a deeper understanding of NIRS limitations. Concentration changes of oxy and deoxyhemoglobin (HbO and HbR) indicate the oxygen status of blood vessels and correlate with several other physiological parameters across different pathologies. The oxidation state of CCO indicates cellular energy usage efficiency through oxidative metabolism, potentially serving as a biomarker for brain and other tissue disorders. This study employs an analytical model based on the diffusion equation and statistical analyses to explore the dependency of estimated concentration changes on various systematic parameters, such as choice of wavelengths, spectral bandwidth, and uncertainties in extinction coefficient (ε) and differential pathlength factor (DPF). When there is a 10% uncertainty in DPF and ε, errors were found to be highly dependent on the number of discrete wavelengths, but not on their bandwidth if appropriate considerations are taken to account for it.

The Molecular Nature of Redox-Conductive Metal-Organic Frameworks.

ConspectusRedox-conductive metal-organic frameworks (RC-MOFs) are a class of porous materials that exhibit electrical conductivity through a chain of self-exchange reactions between molecularly defined, neighboring redox-active units of differing oxidation states. To maintain electroneutrality, this electron hopping transport is coupled to the translocation of charge balancing counterions. Owing to the molecular nature of the redox active components, RC-MOFs have received increasing attention for potential applications in energy storage, electrocatalysis, reconfigurable electronics, etc. While our understanding of fundamental aspects that govern electron hopping transport in RC-MOFs has improved during the past decade, certain fundamental aspects such as questions that arise from the coupling between electron hopping and diffusion migration of charge balancing counterions are still not fully understood.In this Account, we summarize and discuss our group's efforts to answer some of these fundamental questions while also demonstrating the applicability of RC-MOFs in energy-related applications. First, we introduce general design strategies for RC-MOFs, fundamentals that govern their charge transport properties, and experimental diagnostics that allow for their identification. Selected examples with redox-active organic linkers or metallo-linkers are discussed to demonstrate how the molecular characteristics of the redox-active units inside RC-MOFs are retained. Second, we summarize experimental techniques that can be used to characterize charge transport properties in a RC-MOF. The apparent electron diffusion coefficient, Deapp, that is frequently determined in the field and obtained in large perturbation, transient experiments will be discussed and related to redox conductivity, σ, that is obtained in a steady state setup. It will be shown that both MOF-intrinsic (topology, pore size, and apertures) and experimental (nature of electrolyte, solvent) factors can have noticeable impact on electrical conductivity through RC-MOFs. Lastly, we summarize our progress in utilizing RC-MOFs as electrochromic materials, materials for harvesting minority carriers from illuminated semiconductors and within electrocatalysis. In the latter case, recent work on multivariate RC-MOFs in which redox active linkers are used to "wire" redox catalysts in the crystal interiors will be presented, offering opportunities to independently optimize charge transport and catalytic function.The ambition of this Account is to inspire the design of new RC-MOF systems, to aid their identification, to provide mechanistic insights into the governing ion-coupled electron hopping transport mode of conductivity, and ultimately to promote their applications in existing and emerging areas. With basically unlimited possibilities of molecular engineering tools, together with research in both fundamental and applied fields, we believe that RC-MOFs will attract even more attention in the future to unlock their full potential.

Reductive Elimination from Tetra-Alkyl Cuprates [Me n Cu(CF3)4- n ]- (n = 1 - 4): Beyond Simple Oxidation States.

In recent years, the electronic structures of organocuprates in general and the complex [Cu(CF3)4]- in particular have attracted significant interest. A possible key indicator in this context is the reactivity of these species. Nonetheless, this aspect has received only limited attention. Here, we systematically study the series of tetra-alkyl cuprates [MenCu(CF3)4-n]- and their unimolecular reactivity in the gas phase, which includes concerted formal reductive eliminations as well as radical losses. Through computational studies, we characterize the electronic structures of the complexes and show how these are connected to their reactivity. We find that all [MenCu(CF3)4-n]- ions feature inverted ligand fields and that the distinct reactivity patterns of the individual complexes arise from the interplay of different effects.

Isostructural Series of a Cyclometalated Iron Complex in Three Oxidation States.

An isostructural series of FeII, FeIII, and FeIV complexes [Fe(ImP)2]0/+/2+ utilizing the ImP 1,1'-(1,3-phenylene)bis(3-methyl-1-imidazol-2-ylidene) ligand, combining N-heterocyclic carbenes and cyclometalating functions, is presented. The strong donor motif stabilizes the high-valent FeIV oxidation state yet keeps the FeII oxidation state accessible from the parent FeIII compound. Chemical oxidation of [Fe(ImP)2]+ yields stable [FeIV(ImP)2]2+. In contrast, [FeII(ImP)2]0, obtained by reduction, is highly sensitive toward oxygen. Exhaustive ground state characterization by single-crystal X-ray diffraction, 1H NMR, Mössbauer spectroscopy, temperature-dependent magnetic measurements, a combination of X-ray absorption near edge structure and valence-to-core, as well as core-to-core X-ray emission spectroscopy, complemented by detailed density functional theory (DFT) analysis, reveals that the three complexes [Fe(ImP)2]0/+/2+ can be unequivocally attributed to low-spin d6, d5, and d4 complexes. The excited state landscape of the FeII and FeIV complexes is characterized by short-lived 3MLCT and 3LMCT states, with lifetimes of 5.1 and 1.4 ps, respectively. In the FeII-compound, an energetically low-lying MC state leads to fast deactivation of the MLCT state. The distorted square-pyramidal state, where one carbene is dissociated, can not only relax into the ground state, but also into a singlet dissociated state. Its formation was investigated with time-dependent optical spectroscopy, while insights into its structure were gained by NMR spectroscopy.

Formation of Fully Stoichiometric, Oxidation-State Pure Neptunium and Plutonium Dioxides from Molecular Precursors.

Amidate-based ligands (N-(tert-butyl)isobutyramide, ITA) bind κ2 to form homoleptic, 8-coordinate complexes with tetravalent 237Np (Np(ITA)4, 1-Np) and 242Pu (Pu(ITA)4, 1-Pu). These compounds complete an isostructural series from Th, U-Pu and allow for the direct comparison between many of the early actinides with stable tetravalent oxidation states by nuclear magnetic resonance (NMR) spectroscopy and single crystal X-ray diffraction (SCXRD). The molecular precursors are subjected to controlled thermolysis under mild conditions with the exclusion of exogenous air and moisture, facilitating the removal of the volatile organic ligands and ligand byproducts. The preformed metal-oxygen bond in the precursor, as well as the metal oxidation state, are maintained through the decomposition, forming fully stoichiometric, oxidation-state pure NpO2 and PuO2. Powder X-ray diffraction (PXRD), scanning transmission electron microscopy (STEM), and energy dispersive X-ray spectroscopy (EDS) elemental mapping supported the evaluation of these high-purity materials. This chemistry is applicable to a wide range of metals, including actinides, with accessible tetravalent oxidation states, and provides a consistent route to analytical standards of importance to the field of nuclear nonproliferation, forensics, and fundamental studies.

Intellectual fitting of hard X-ray resonant reflectance maps obtained for low-contrast oxide multilayers across L absorption edges of Eu and Gd

The present work describes an intellectual computational approach to X-ray resonant reflectometry – a synchrotron-based method aimed at non-destructive characterization of epitaxial nanoscale multilayers with low optical contrast between the sublayer materials. Resonant reflectance from specially designed bilayer structures was measured as a function of grazing angle and photon energy across the L absorption edges of rare earth elements and then modeled with the aid of a specially developed software utilizing OpenCL high speed computations performed on a graphical processing unit. The map fitting was carried out in the blind mode in which the spectral shapes of the optical constants of the sublayers were reconstructed by the fitting routine without initial knowledge of the chemical composition and without using any reference spectra. The model uses stepped Lorentzian line shape for the imaginary part of the scattering length density and the Kramers-Kronig consistent line shape for the corresponding real part. Epitaxially grown Eu2O3 / Gd3Ga5O12 bilayers were used as a test bench system to demonstrate the benefits of the proposed 2D mapping technique over conventional X-ray reflectometry. To increase reliability, the map fitting was carried out simultaneously at the absorption edges of two different chemical elements. The derived shapes and positions of the absorption peaks were used to uniquely identify rare earth elements within the corresponding sublayers and provide information on their oxidation states. The method was experimentally tested on the bilayers having different material order to show that not only the chemical composition but also the layer sequence can be effectively reconstructed in the automatic way from the 2D resonant reflectance maps.

Proteomics reveals dynamic metabolic changes in human hematopoietic stem progenitor cells from fetal to adulthood

BackgroundHematopoietic stem progenitor cells (HSPCs) undergo phenotypical and functional changes during their emergence and development. Although the molecular programs governing the development of human hematopoietic stem cells (HSCs) have been investigated broadly, the relationships between dynamic metabolic alterations and their functions remain poorly characterized.MethodsIn this study, we comprehensively described the proteomics of HSPCs in the human fetal liver (FL), umbilical cord blood (UCB), and adult bone marrow (aBM). The metabolic state of human HSPCs was assessed via a Seahorse assay, RT‒PCR, and flow cytometry-based metabolic-related analysis. To investigate whether perturbing glutathione metabolism affects reactive oxygen species (ROS) production, the metabolic state, and the expansion of human HSPCs, HSPCs were treated with buthionine sulfoximine (BSO), an inhibitor of glutathione synthetase, and N-acetyl-L-cysteine (NAC).ResultsWe investigated the metabolomic landscape of human HSPCs from the fetal, perinatal, and adult developmental stages by in-depth quantitative proteomics and predicted a metabolic switch from the oxidative state to the glycolytic state during human HSPC development. Seahorse assays, mitochondrial activity, ROS level, glucose uptake, and protein synthesis rate analysis supported our findings. In addition, immune-related pathways and antigen presentation were upregulated in UCB or aBM HSPCs, indicating their functional maturation upon development. Glutathione-related metabolic perturbations resulted in distinct responses in human HSPCs and progenitors. Furthermore, the molecular and immunophenotypic differences between human HSPCs at different developmental stages were revealed at the protein level for the first time.ConclusionThe metabolic landscape of human HSPCs at three developmental stages (FL, UCB, and aBM), combined with proteomics and functional validations, substantially extends our understanding of HSC metabolic regulation. These findings provide valuable resources for understanding human HSC function and development during fetal and adult life.

Seasonal Controls on Microbial Depolymerization and Oxidation of Organic Matter in Floodplain Soils.

Floodplain soils are vast reservoirs of organic carbon often attributed to anaerobic conditions that impose metabolic constraints on organic matter degradation. What remains elusive is how such metabolic constraints respond to dynamic flooding and drainage cycles characteristic of floodplain soils. Here we show that microbial depolymerization and respiration of organic compounds, two rate-limiting steps in decomposition, vary spatially and temporally with seasonal flooding of mountainous floodplain soils (Gothic, Colorado, USA). Combining metabolomics and -proteomics, we found a lower abundance of oxidative enzymes during flooding coincided with the accumulation of aromatic, high-molecular weight compounds, particularly in surface soils. In subsurface soils, we found that a lower oxidation state of carbon coincided with a greater abundance of chemically reduced, energetically less favorable low-molecular weight metabolites, irrespective of flooding condition. Our results suggest that seasonal flooding temporarily constrains oxidative depolymerization of larger, potentially plant-derived compounds in surface soils; in contrast, energetic constraints on microbial respiration persist in more reducing subsurface soils regardless of flooding. Our work underscores that the potential vulnerability of these distinct anaerobic carbon storage mechanisms to changing flooding dynamics should be considered, particularly as climate change shifts both the frequency and extent of flooding in floodplains globally.

Production and characterization of nano-magnetic material through different red mud reduction processes

Red mud (RM), is an industrial waste deriving from the production of primary aluminium, with about 200 Mtons generated annually. In this work, the reduction of RM for obtaining magnetic products with particular chemical-physical characteristics has been explored. RM reduction was carried out in a semi-closed reducing environment at a high processing temperature (750–1100 °C) in the presence of carbon-rich ash (CA) resulting from a commercial pyro-gasification plant and by using an H2 atmosphere. All the materials were characterized by elemental analysis, XRD diffraction technique, SEM/EDX microscopy, thermogravimetry and infrared spectroscopy. The materials obtained under the different conditions have in common the presence of small iron-magnetic domains (with different iron oxidation states), in the order of hundreds of nanometres, and by the ferro-magnetic or paramagnetic response to an external magnetic field. In particular, the material pre-treated with HCl (enriched in iron) and reduced with H2 showed very good magnetic responses, more iron in reduced oxidative states showing high ferro-magnetic responses to the external field. The synthesised materials are quite differents each others and appear to have several potential fields of application, as sorbents for specific wastewater pollutants, as materials for CO2 capture, for catalysis and (bio)sensing applications. Nevertheless, the high interconnection between the magnetic and non-magnetic phases limit the direct separation or the iron enrichment. Further efforts should be focused on the functional studies and subsequent LCA and LCC analyses.