Meniscal Scaffold Research Articles

Meniscal scaffolds based on self-healable elastomer-hydrogel composites with biomimetic structure and tribological properties for repairing meniscal injuries

Meniscal injuries are increasing dramatically with the aging of the population and the prevalence of sports. Tissue engineering technology is the most promising method for the treatment of meniscal injuries, but the preparation of long-term and durable meniscal scaffolds with mechanical and tribological properties like natural articular cartilage remains a great challenge. Here, inspired by the structure and lubrication mechanism of the meniscus, a durable meniscus scaffold with bionic 3D structure, self-lubrication, and intelligent drug release function is prepared. An elastomer-hydrogel composite consisting of a direct ink writing (DIW) printed elastomer skeleton and a hydrogel matrix is prepared for the meniscus scaffold. The bionic 3D structure of the scaffolds is realized by combining computer-aided structural design and 3D printing technology. The self-healing ability obtained by incorporating dynamic covalent bonds, and the robust interface achieved by co-curing of the elastomer and hydrogel resins, ensure the stability and durability of the composite meniscal scaffolds. Taking advantage of the coexistence of aqueous and oily phases in the emulsion-type hydrogel resin, a hydrophobic phospholipid is loaded into the hydrogel, and achieves excellent boundary lubrication of the composite through its fiction-response release and self-assembly. Moreover, the meniscus scaffolds enable intelligent drug release to adapt to the physiological characteristics during inflammation. In vivo tests in rabbit models validate the protective effect of the scaffold on cartilage. These methods and concepts provide a solid foundation for the preparation of bionic tissue scaffolds.

Exercise Induced Endothelial Mesenchymal Transition (EndMT) Facilitates Meniscal Fibrocartilage Regeneration.

The meniscus is a semilunar wedge-shaped fibrocartilage tissue within the knee joint that is important for withstanding mechanical shock during joint motion. The intrinsic healing capacity of meniscus tissue is very limited, which makes meniscectomy the primary treatment method in the clinic. An effective translational strategy for regenerating the meniscus after total or subtotal meniscectomy, particularly for extensive meniscal lesions or degeneration, is yet to be developed. The present study demonstrates that the endothelial mesenchymal transition (EndMT) contributes to meniscal regeneration. The mechanical stimulus facilitated EndMT by activating TGF-β2 signaling. A handheld bioprinter system to intraoperatively fabricate a porous meniscus scaffold according to the resected meniscus tissue is developed; this can simplify the scaffold fabrication procedure and period. The transplantation of a porous meniscus scaffold combined with a postoperative regular exercise stimulus facilitated the regeneration of anisotropic meniscal fibrocartilaginous tissue and protected the joint cartilage from degeneration in an ovine subtotal meniscectomy model. Single-cell RNA sequencing and immunofluorescence co-staining analyses further confirmed the occurrence of EndMT during meniscal regeneration. EndMT-transformed cells gave rise to fibrochondrocytes, subsequently contributing to meniscal fibrocartilage regeneration. Thus, an efficient translational strategy to facilitate meniscal regeneration is developed.

Cell-free decellularized skin matrix scaffolds: A promising approach for meniscus regeneration in a rabbit meniscectomy model

Tissue engineering presents a promising approach for the treatment of meniscal injuries, yet the development of meniscal scaffolds that exhibit both superior biomechanical properties and biocompatibility remains a considerable challenge. In this study, decellularized skin matrix (DSM) scaffolds were first prepared using porcine skin through decellularization and freeze-drying techniques. The DSM scaffold has favorable porosity, hydrophilicity, and biocompatibility. Importantly, the collagen content and tensile modulus of the scaffold are comparable to those of native meniscus (44.13 ± 2.396 mg/g vs. 42.41 ± 2.40 mg/g and 103.30 ± 2.98 MPa vs. 128.80 ± 9.115 MPa). Subsequently, the peptide PFSSTKT (PFS) with mesenchymal stem cells (MSCs) recruitment capability was used to modify DSM to construct DSM-PFS scaffolds. Compared to the DSM scaffold, the optimized DSM-PFS scaffold enhanced in vitro collagen and glycosaminoglycan (GAG) production and upregulated the expression of cartilage-specific genes. Furthermore, the DSM-PFS scaffold was more effective in recruiting MSCs in vitro. In vivo studies in rabbit models showed that the DSM-PFS scaffold successfully promoted meniscus tissue regeneration. Three months post-implantation, meniscus tissue formation can be observable, and after six months, the neo-meniscus exhibited tissue structure and tensile properties similar to the native meniscus. Notably, the DSM-PFS scaffold exhibited significant chondroprotective effects, slowing osteoarthritis (OA) progression. In conclusion, the DSM-PFS scaffold may represent a promising candidate for future applications in meniscus tissue engineering. Statement of significanceWe developed a decellularized skin matrix (DSM) meniscus scaffold using whole-layer porcine skin, demonstrating superior biomechanical strength and biocompatibility. Following modification with the stem cell-recruiting peptide PFS, the optimized DSM-PFS scaffold outperformed the DSM scaffold in cell attraction, collagen and glycosaminoglycan production, and cartilage-specific gene expression. Implanted into rabbit knee joints, the cell-free DSM-PFS scaffold induced meniscal tissue formation within three months, achieving the histological structure and tensile strength of the native meniscus by six months. Moreover, it significantly protected the cartilage. Our findings provide new insights into the fabrication of scaffolds for meniscal tissue engineering, with the DSM-PFS scaffold emerging as an ideal candidate for future applications.

Meniscal Allograft versus Synthetic Graft in Treatment Outcomes of Meniscus Repair: A Mini-review and Meta-analysis.

Meniscal injuries are highly correlated with osteoarthritis (OA) onset and progression. Although meniscal allograft transplantation (MAT) is a therapeutic option to restore meniscal anatomy, a shortage of donor material and the donor-derived infectious risk may be concerns in clinics. This review summarizes the literature reporting meniscus repair status in preclinical models and clinical practice using allografts or synthetic grafts. The advantages and limitations of biodegradable polymer-based meniscal scaffolds, applied in preclinical studies, are discussed. Then, the long-term treatment outcomes of patients with allografts or commercial synthetic scaffolds are compared. A total of 47 studies are included in our network meta-analysis. Compared with the meniscal allografts, the commercial synthetic products significantly improved clinical treatment outcomes in terms of the Knee Injury and Osteoarthritis Outcome Score (KOOS), Visual Analog Scale (VAS) scores, and Lysholm scores. In addition, development strategies for the next generation of novel synthetic scaffolds are proposed through optimization of structural design and fabrication, and selection of cell sources, external stimuli, and active ingredients. This review may inspire researchers and surgeons to design and fabricate clinic-orientated grafts with improved treatment outcomes.

Addressing meniscal deficiency part 2: An umbrella review of systematic reviews and meta-analyses on meniscal scaffold-based approaches.

Meniscal injuries are common in knee surgery and often require preservation techniques to prevent secondary osteoarthritis. Despite advancements in repair techniques, some patients undergo partial meniscectomy, which can lead to postmeniscectomy syndrome. To address these challenges, meniscal substitution techniques like scaffolds have been developed. However, a comprehensive synthesis of the existing evidence through an umbrella review is lacking. A comprehensive search was conducted in the MEDLINE, Embase and Scopus databases to identify relevant systematic reviews and meta-analyses. Studies were screened based on predefined inclusion and exclusion criteria. The quality of included studies was assessed using the AMSTAR-2 tool. A total of 17 studies met the inclusion criteria and were included in the review. Most studies focused on the use of collagen-based scaffolds, with fewer studies evaluating synthetic scaffolds. The majority of studies (52.9%) were rated as having 'Critically Low' overall confidence, with only one study (5.9%) rated as 'High' confidence and most studies exhibiting methodological limitations, such as small sample sizes and lack of long-term follow-up. Despite these limitations, the majority of studies reported positive short-term outcomes, including pain relief and functional improvement, following scaffold implantation. However, some studies noted a relatively high failure rate. Radiographically, outcomes also varied, with some studies reporting morphological deterioration of the implant seen on MRI, while others noted possible chondroprotective effects. Meniscal scaffold-based approaches show promise in the management of meniscal deficiency; however, the current evidence is limited by methodological shortcomings. One notable gap in the literature is the lack of clear guidelines for patient selection and surgical technique. Future research should focus on conducting well-designed randomized controlled trials with long-term follow-up to further elucidate the benefits and indications of these techniques in clinical practice. Additionally, efforts should be made to develop consensus guidelines to standardize the use of meniscal scaffolds and improve patient outcomes. Despite limited availability, synthesizing the literature on meniscal scaffold-based approaches is crucial for understanding research, guiding clinical decisions and informing future directions. Level IV.

Construction of a novel tissue engineered meniscus scaffold based on low temperature deposition three-dimenisonal printing technology

To investigate the construction of a novel tissue engineered meniscus scaffold based on low temperature deposition three-dimenisonal (3D) printing technology and evaluate its biocompatibility. The fresh pig meniscus was decellularized by improved physicochemical method to obtain decellularized meniscus matrix homogenate. Gross observation, HE staining, and DAPI staining were used to observe the decellularization effect. Toluidine blue staining, safranin O staining, and sirius red staining were used to evaluate the retention of mucopolysaccharide and collagen. Then, the decellularized meniscus matrix bioink was prepared, and the new tissue engineered meniscus scaffold was prepared by low temperature deposition 3D printing technology. Scanning electron microscopy was used to observe the microstructure. After co-culture with adipose-derived stem cells, the cell compatibility of the scaffolds was observed by cell counting kit 8 (CCK-8), and the cell activity and morphology were observed by dead/live cell staining and cytoskeleton staining. The inflammatory cell infiltration and degradation of the scaffolds were evaluated by subcutaneous experiment in rats. The decellularized meniscus matrix homogenate appeared as a transparent gel. DAPI and histological staining showed that the immunogenic nucleic acids were effectively removed and the active components of mucopolysaccharide and collagen were remained. The new tissue engineered meniscus scaffolds was constructed by low temperature deposition 3D printing technology and it had macroporous-microporous microstructures under scanning electron microscopy. CCK-8 test showed that the scaffolds had good cell compatibility. Dead/live cell staining showed that the scaffold could effectively maintain cell viability (>90%). Cytoskeleton staining showed that the scaffolds were benefit for cell adhesion and spreading. After 1 week of subcutaneous implantation of the scaffolds in rats, there was a mild inflammatory response, but no significant inflammatory response was observed after 3 weeks, and the scaffolds gradually degraded. The novel tissue engineered meniscus scaffold constructed by low temperature deposition 3D printing technology has a graded macroporous-microporous microstructure and good cytocompatibility, which is conducive to cell adhesion and growth, laying the foundation for the in vivo research of tissue engineered meniscus scaffolds in the next step.

Unicompartmental osteoarthritis: High survival rate with a combined mechanical and biological salvage approach as alternative to metal resurfacing: Results at minimum 10 years of follow-up.

The aim of this study was to prospectively evaluate the long-term clinical results and failure rate of patients treated with complex salvage procedures using a combined mechanical and biological approach to address unicompartmental knee osteoarthritis (OA) and postpone the need for joint replacement. Thirty-nine patients (40.3 ± 10.9 years old) affected by unicompartmental OA (Kellgren-Lawrence 3) in stable joints underwent a personalized surgical treatment depending on the specific requirements of the affected compartment, including high tibial osteotomy, osteochondral scaffold, meniscal scaffold and meniscal allograft transplantation. Patients were evaluated with the International Knee Documentation Committee (IKDC), Visual Analogue Scale (VAS) and Tegner scores before surgery, at 3 years and a minimum of 10 years of follow-up. A significant improvement was observed over time in all scores but worsened at the final follow-up. The IKDC subjective score improved from 46.9 ± 16.2 to 79.8 ± 16.4 at 3 years (p < 0.0005) and then decreased to 64.5 ± 21.4 (p = 0.001) at 12 years. A similar trend was confirmed for VAS and Tegner scores. Only two patients subsequently underwent knee arthroplasty, and nine more patients were considered clinical failure, for a cumulative surgical and clinical failure rate of 28.2% at the final follow-up. A personalized, joint-preserving, combined mechanical and biological approach, addressing alignment as well as meniscal and cartilage lesions, is safe and effective, providing a clinical benefit and delaying the need for arthroplasty in young patients affected by unicompartmental knee OA. At the final evaluation, the clinical improvement decreased, but more than two-thirds of the patients still benefited from this treatment at a long-term follow-up. Level IV case series.

Biologic Augmentation of Isolated Meniscal Repair.

The limited blood supply and intrinsic healing capacity of the meniscus contributes to suboptimal tissue regeneration following injury and surgical repair. Biologic augmentation techniques have been utilized in combination with isolated meniscal repair to improve tissue regeneration. Several innovative strategies such as Platelet-Rich Plasma (PRP), fibrin clots, mesenchymal stem cells (MSCs), bone marrow stimulation, meniscal scaffolds, and meniscal wrapping, are being explored to enhance repair outcomes. This article provides a comprehensive review of recent findings and conclusions regarding biologic augmentation techniques. Studies on PRP reveal mixed outcomes, with some suggesting benefits in reducing failure rates of isolated meniscal repair, while others question its efficacy. Fibrin clots and PRF (Platelet-rich fibrin), although promising, show inconsistent results and lack sufficient evidence for definitive conclusions. MSCs demonstrate potential in preclinical studies, but clinical trials have been limited and inconclusive. Bone marrow stimulation appears effective in certain contexts, but its broader applicability remains uncertain. Meniscal scaffolds, including CMI (Collagen Meniscal Implants) and Actifit (polyurethane scaffolds), show encouraging short- and mid-term outcomes but have not consistently surpassed traditional methods in the long term. Meniscal wrapping is infrequently studied but demonstrates positive short-term results with certain applications. The review reveals a diverse range of outcomes for biologic augmentation in meniscal repair. While certain techniques show promise, particularly in specific scenarios, the overall efficacy of these methods has yet to reach a consensus. The review underscores the necessity for standardized, high-quality research to establish the definitive effectiveness of these biologic augmentation methods.

Usefulness of Probing Sensor Device for Evaluating Meniscal Suture and Scaffold Implantation.

Appropriate suture tension is a key factor in successful meniscal repair. This study aimed to clarify the appropriate value of meniscal stabilization with suture repair based on a probing procedure for healthy porcine menisci and a novel meniscal scaffold. After evaluating the reliability of the probing sensor, meniscal vertical tear and partial meniscectomy models were developed, in which suture repair and meniscal scaffold implantation were performed at suture intervals ranging between 20 and 2.5 mm. The residence forces at each interval were evaluated using a probing sensor. Moreover, a tensile test was conducted to evaluate the displacement and presence or absence of gaps. We found that normal and meniscal scaffolds should be fixed within 5 mm of suture interval. The probing residence forces required were at least 1.0 N for vertical tears and 3.0 N for meniscal scaffolds. These findings may be taken into consideration to reduce suture failure following meniscal tear repair and stabilizing meniscal scaffold fixation.

3D Printed Elastomer‐Hydrogel Composite Meniscal Scaffolds with Biomimetic Gradient Structure and Robust Interface for Preventing Osteoarthritis and Repairing Meniscal Injuries

AbstractMeniscal implants with biomimetic 3D architecture, gradient mechanical properties, and excellent biocompatibility are urgently required due to the increasing incidence of meniscus injuries. Inspired by the microstructure of the meniscus, which consists of a meshwork interwoven with collagen fibers and a hydrophilic matrix filled with glycosaminoglycans and chondrocytes, here a type of structurally and functionally optimized meniscal scaffolds is prepared. Direct‐ink‐writing 3D printing technology is utilized to construct an elastomeric skeleton with a biomimetic 3D and gradient microstructure, and then hydrogel resin is infiltrated into the skeleton, resulting in an elastomer‐reinforced hydrogel composite meniscal scaffold through co‐curing of the elastomer and hydrogel resins. The composite meniscal scaffolds exhibit a highly porous structure and biomimetic gradient mechanical properties by controlling the ratio of elastomer and hydrogel materials. The co‐curing of the two materials creates robust interfaces through strong covalent bonding, ensuring their reliable long‐term mechanical performance. Furthermore, the coexistence of aqueous and oily phases of the emulsion‐type hydrogel resin allows the loading of both water‐soluble and lipid‐soluble drugs, endowing the composite scaffolds with a diphasic drug‐release capacity. The composite scaffolds are then implanted in the knee joints of beagle canines, successfully promoting the repair of meniscal injury and tissue regeneration.

A High-Density Hydrogen Bond Locking Strategy for Constructing Anisotropic High-Strength Hydrogel-Based Meniscus Substitute.

Mimicking anisotropic features is crucial for developing artificial load-bearing soft tissues such as menisci). Here, a high-density hydrogen bond locking (HDHBL) strategy, involving preloading a poly(N-acryloylsemicarbazide) (PNASC) hydrogel with an aqueous solution containing a hydrogen bond breaking agent, followed by water exchange, to fabricate anisotropic high-strength hydrogels are proposed. During this process, multiple high-density hydrogen bonds of the PNASC network are re-established, firmly freezing oriented molecular chains, and creating a network with an anisotropic microstructure. The resulting anisotropic hydrogels exhibit superior mechanical properties: tensile strength over 9MPa, Young's modulus exceeding 120MPa along the orientation direction, and fatigue thresholds exceeding 1900Jm-2. These properties meet the mechanical demands for load-bearing tissue substitutes compared to other reported anti-fatigue hydrogels. This strategy enables the construction of an anisotropic meniscal scaffold composed of circumferentially oriented microfibers by preloading a digital light processing-3D printed PNASC hydrogel-based wedge-shaped construct with a resilient poly(N-acryloyl glycinamide) hydrogel. The 12-week implantation of a meniscus scaffold in rabbit knee joints after meniscectomy demonstrates a chondroprotective effect on the femoral condyle and tibial plateau, substantially ameliorating the progression of osteoarthritis. The HDHBL strategy enables the fabrication of various anisotropic polymer hydrogels, broadening their scope of application.

Total meniscus replacement with a 3D printing of network hydrogel composite scaffold in a rabbit model.

The aim of this study was to evaluate the role of a novel total meniscal implant in promoting meniscal regeneration and protecting articular cartilage in a rabbit model for 3 and 6 months. Thirty-six New Zealand rabbits were selected and divided into poly(ɛ-caprolactone) (PG-Pg) scaffold group, meniscectomy group and sham group. In this study, it was investigated whether PG-Pg scaffold can prevent articular cartilage degeneration and promote tissue degeneration, and its mechanical properties at 3 and 6 months after surgery were also explored. The degree of articular cartilage degeneration was significantly lower in the PG-Pg scaffold group than in the meniscectomy group. The number of chondrocytes increased in the PG-Pg scaffold at 3 and 6 months, while a gradual increase in the mechanical properties of the PG-Pg stent was observed from 6 months. The PG-Pg scaffold slows down the degeneration of articular cartilage, promotes tissue regeneration and improves biomechanical properties after meniscectomy. This novel meniscus scaffold holds promise for enhancing surgical strategies and delivering superior long-term results for individuals with severe meniscus tears. NA.

Fibrochondrogenic Differentiation Potential of Human Adiposederived Mesenchymal Stem Cells in a Type I Collagen-based Meniscus Scaffold with Activated Platelet-Rich Plasma Stimulation In-vitro

Introduction: Despite efforts to use scaffolds to treat meniscus tears, minimal progress has been made in facilitating meniscus regeneration and return of function. Our research objective was to develop a meniscus repair and regeneration implant by applying a resorbable scaffold in combination with cells and growth factors. We report here the results of using Platelet-Rich Plasma (PRP) as a source of growth factors to induce fibrochondrogenic differentiation of human Adipose- Derived Mesenchymal Stem Cells (hADSC) in a three-dimensional (3D) Type I collagen-based scaffold in-vitro. Methods: Scaffold Preparation: Type I collagen scaffolds were prepared following a protocol previously published. Two different densities of scaffolds, High Density (HD) and Low Density (LD), were produced for in-vitro study. hADSC and PRP Preparation. hADSCs were cultured to the fifth passage to reach the desired number for experimentation. PRP was collected from human blood and activated. Cell Culture Procedure: Effects of PRP on hADSC proliferation and differentiation into fibrochondrogenic cells were examined in four scaffold groups: LD, HD, LD+PRP and HD+PRP. hADSCs were seeded onto scaffolds (n=5) at a concentration of 2 × 106 cells/scaffold. 1% of PRP was added to the experimental media. Cellular proliferation was assessed at 1, 7, 14 and 21 days. Differentiation was measured using qRT-PCR on Days 14 and 21. qRT- PCR analysis of gene expression was completed with primers for COLLAGEN 1 and AGGRECAN. Data Analysis: ANOVAs were conducted (two-tailed tests) at the .05 significance level. Results: Cellular proliferation of hADSCs seeded on each scaffold increased over time. Similar trend was observed for cells seeded on HD scaffolds with and without PRP. hADSC showed significant increase in cellular proliferation on the LD scaffolds at Days 1 and 7. At Day 21, PRP treatment and LD scaffold had a synergistic positive effect on Type I collagen gene expression. PRP did not elevate type I collagen gene in the HD group, the HD scaffold alone had the same level of type I collagen gene expression as LD+PRP. Aggrecan expression was elevated in the presence of PRP in both the HD and LD scaffold groups, indicating enhanced fibrochondrogenic differentiation of hADSCs. Effective cell infiltration was observed across both HD and LD scaffolds with and without PRP treatment. HD scaffolds displayed larger cell clusters and more extensive cell migration over time compared to LD scaffolds. However, LD scaffolds resulted a more uniform cellular distribution than HD scaffolds. Conclusion: Our study demonstrates that PRP can play an important role in directing hADSCs towards fibrochondrogenic differentiation in Type I collagen-based scaffolds in-vitro. Additionally, our study shows that collagen scaffold density can influence the spatial distribution and cellular behavior of infiltrated cells.

Optimized Allogenic Decellularized Meniscal Scaffold Modified by Collagen Affinity Stromal Cell–Derived Factor SDF1α for Meniscal Regeneration: A 6- and 12-Week Animal Study in a Rabbit Model

Background: Total meniscectomy for treating massive meniscal tears may lead to joint instability, cartilage degeneration, and even progressive osteoarthritis. The meniscal substitution strategies for advancing reconstruction of the meniscus deserve further investigation. Hypothesis: A decellularized meniscal scaffold (DMS) modified with collagen affinity stromal cell–derived factor (C-SDF1α) may facilitate meniscal regeneration and protect cartilage from abrasion. Study Design: Controlled laboratory study. Methods: The authors first modified DMS with C-SDF1α to fabricate a new meniscal graft (DMS-CBD [collagen-binding domain]). Second, they performed in vitro studies to evaluate the release dynamics, biocompatibility, and differentiation inducibility (osteogenic, chondrogenic, and tenogenic differentiation) on human bone marrow mesenchymal stem cells. Using in vivo studies, they subjected rabbits that received medial meniscectomy to a transplantation procedure to implement their meniscal graft. At postoperative weeks 6 and 12, the meniscal regeneration outcomes and chondroprotective efficacy of the new meniscal graft were evaluated by macroscopic observation, histology, micromechanics, and immunohistochemistry tests. Results: In in vitro studies, the optimized DMS-CBD graft showed notable biocompatibility, releasing efficiency, and chondrogenic inducibility. In in vivo studies, the implanted DMS-CBD graft after total meniscectomy promoted the migration of cells and extracellular matrix deposition in transplantation and further facilitated meniscal regeneration and protected articular cartilage from degeneration. Conclusion: The new meniscal graft (DMS-CBD) accelerated extracellular matrix deposition and meniscal regeneration and protected articular cartilage from degeneration. Clinical Relevance: The results demonstrate that the DMS-CBD graft can serve as a potential meniscal substitution after meniscectomy.

Evaluation of Remodeling and Extrusion of Polyurethane Meniscal Implants after Meniscus Reconstruction using Ultrasonography.

Meniscal tears are among the most common indications for knee arthroscopy. Artificial polyurethane scaffolds have demonstrated efficacy in reducing pain and promoting the growth of normal meniscal tissue, with high absorption rates facilitating full tissue regeneration. This study aimed to evaluate the remodeling of polyurethane meniscal implants post-reconstruction using ultrasonography. This imaging technique not only assesses changes in implant properties, such as echogenicity, but also the shape changes during functional examination. The assessment of meniscal extrusion, comparing size at rest and under weight-bearing, is an indirect parameter that provides insight into the physical properties of the remodeling implant, with greater extrusion indicating reduced stiffness and inferior physical properties of the meniscus. Ultrasonography has the valuable advantage of allowing for assessment of the blood supply to the meniscus through Power Doppler imaging. The presence of vessels within the meniscal implants serves as evidence of ongoing remodeling. The study included 35 patients (13 female, 22 male; mean age 41.6 years, range 18-66) who underwent arthroscopic meniscal reconstruction with polyurethane implants, with an average time from surgery of 2.8 years (range 0.3-4.5 years). Results showed complete (29.7%), significant (45.9%), or moderate (16.2%) remodeling into natural meniscal tissue in 91.8% of the implants. The mean values of extrusion in the supine position and during 90-degree flexion were significantly greater in the operated limb (2.603) compared to the contralateral limb (1.978; t(35) = 2.442; P < 0.05). No significant differences in extrusion were found between the limbs in a standing position, indicating favorable physical properties of the polyurethane meniscal implants. Further ultrasonography studies of meniscal scaffolds are deemed relevant.

Development of a highly concentrated collagen ink for the creation of a 3D printed meniscus

The most prevalent extracellular matrix (ECM) protein in the meniscus is collagen, which controls cell activity and aids in preserving the biological and structural integrity of the ECM. To create stable and high-precision 3D printed collagen scaffolds, ink formulations must possess good printability and cytocompatibility. This study aims to overlap the limitation in the 3D printing of pure collagen, and to develop a highly concentrated collagen ink for meniscus fabrication. The extrusion test revealed that 12.5 % collagen ink had the best combination of high collagen concentration and printability. The ink was specifically designed to have load-bearing capacity upon printing and characterized with respect to rheological and extrusion properties. Following printing of structures with different infill, a series of post-processing steps, including salt stabilization, pH shifting, washing, freeze-drying, crosslinking and sterilization were performed, and optimised to maintain the stability of the engineered construct. Mechanical testing highlighted a storage modulus of 70 kPa for the lower porous structure while swelling properties showed swelling ratio between 9 and 11 after 15 min of soaking. Moreover, human avascular and vascular meniscus cells cultured on the scaffolds deposited a meniscus-like matrix containing collagen I, II and glycosaminoglycans after 28 days of culture. Finally, as proof-of-concept, human size 3D printed meniscus scaffold were created.

Meniscal fibrocartilage regeneration inspired by meniscal maturational and regenerative process.

Meniscus is a complex and crucial fibrocartilaginous tissue within the knee joint. Meniscal regeneration remains to be a scientific and translational challenge. We clarified that mesenchymal stem cells (MSCs) participated in meniscal maturation and regeneration using MSC-tracing transgenic mice model. Here, inspired by meniscal natural maturational and regenerative process, we developed an effective and translational strategy to facilitate meniscal regeneration by three-dimensionally printing biomimetic meniscal scaffold combining autologous synovium transplant, which contained abundant intrinsic MSCs. We verified that this facilitated anisotropic meniscus-like tissue regeneration and protected cartilage from degeneration in large animal model. Mechanistically, the biomechanics and matrix stiffness up-regulated Piezo1 expression, facilitating concerted activation of calcineurin and NFATc1, further activated YAP-pSmad2/3-SOX9 axis, and consequently facilitated fibrochondrogenesis of MSCs during meniscal regeneration. In addition, Piezo1 induced by biomechanics and matrix stiffness up-regulated collagen cross-link enzyme expression, which catalyzed collagen cross-link and thereby enhanced mechanical properties of regenerated tissue.

Fibronectin-coated polyurethane meniscal scaffolding supplemented with MSCs improves scaffold integration and proteoglycan production in a rabbit model.

The role of mesenchymal stem cells (MSC) in supporting the formation of new meniscal tissue in a meniscal scaffold is not well understood. The objective of this study was to assess the quality of the meniscal tissue produced in a fibronectin (FN)-coated polyurethane (PU) meniscal scaffold after a meniscal injury was made in an experimental rabbit model. Twelve New Zealand white rabbits were divided in two groups after performing a medial meniscectomy of the anterior horn. In group 1, the meniscal defect was reconstructed with a non-MSC supplemented FN-coated PU scaffold. On the other hand, the same scaffold supplemented with MSCs was used in group 2. The animals were sacrificed at 12week after index surgery. A modified scoring system was used for histological assessment. This new scoring (ranging from 0 to 15) includes a structural evaluation (meniscal scaffold interface and extracellular matrix production) and tissue quality evaluation (proteoglycan and type I-collagen content). The meniscal scaffold was found loose in the joint in three cases, corresponding to two cases in group 1 and 1 case in group 2. No differences were observed between the groups in terms of the total score (7.0 ± 0.9 vs. 9.4 ± 2.6, p = 0.09). However, differences were observed in group 2 in which 2 out of the 5 scored items, scaffold integration (1 ± 0.0 vs. 1.9 ± 0.6, p = 0.03) and proteoglycan production (1.2 ± 0.3 vs. 2.4 ± 0.2, p = 0.001). A trend to a higher production of Type I-Collagen production was also observed in group 2 (1.1 ± 0.4 vs. 1.4 ± 0.7, p = 0.05). In a rabbit model at 12weeks, the adhesion of MSCs to a FN-coated PU scaffold improves scaffold integration, proteoglycan production and the characteristics of the new meniscal-like tissue obtained when compared to a non-supplemented scaffold. This fact could be a major step toward improving the adhesion of the MSCs to meniscal scaffolds and, consequently, the obtention of better quality meniscal tissue.

Clinical Outcomes After Polyurethane Meniscal Scaffolds Implantation Remain Stable Despite a Joint Space Narrowing at 10-Year Follow-Up

To report the clinical outcomes, radiologic evolution, and survivorship of a series of patients affected by the postmeniscectomy syndrome and treated with a polyurethane scaffold at a minimum 10-year follow-up. In addition, the radiologic evolution of these patients was also assessed. All the patients operated on with a polyurethane meniscal scaffold implantation to treat postmeniscectomy syndrome from 2008 to 2011 were prospectively followed. Clinical evaluations and radiologic studies were assessed at the preoperative period, at 5-year follow-up, and at minimum 10-year follow-up. Clinical outcomes were based on patient-reported outcomes (e.g., the Knee injury and Osteoarthritis Outcome Score, International Knee Documentation Committee, Lysholm, and Tegner). Radiographical evaluation of the joint-space narrowing was done in the Rosenberg view. Failure was defined as patients who required surgery to remove the scaffold or those patients who needed surgery for a total or partial knee replacement. Twenty-one of 27 patients, with a mean age of 56 ± 9.8 years, were available for the final follow-up. The mean follow-up was 11.8 (range, 10-12.7) years. Six patients were lost to follow-up. All functional scores showed a significant improvement (P < .001) at the 5- and 10-year follow-up. The exception was the Tegner score, which remained stable. The joint-space width was maintained from the preoperative period (1.9 ± 1.2 mm) up to the 5-year follow-up (1.3 ± 1.5 mm, P= .3) and decreased by the last evaluation (0.6 ± 1.2 mm, P= .001) at the last follow-up. Two (9.5%) of 21 patients were converted to a total knee replacement during the study period. None of the other patients needed revision surgery during the study period. The polyurethane meniscal scaffold provides significant and stable pain relief over time and improved functional outcomes at a minimum of 10 years after surgery. However, degenerative changes progressed in the treated compartment, with a joint-space narrowing over the 10-year period. Level IV, retrospective case series.

Safety and Efficacy of a Novel Polyglycolic Acid Meniscal Scaffold for Irreparable Meniscal Tear.

Meniscal tears treated with a partial meniscectomy could induce knee osteoarthritis, thereby altering or damaging knee kinetics and biomechanics. We have developed a meniscal scaffold made of polyglycolic acid (PGA) coated with polylactic acid/caprolactone (PGA scaffold), which could induce new tissue growth of meniscus-like tissue. This study aimed to evaluate the safety and efficacy of a novel meniscal scaffold for the treatment of irreparable meniscal injuries. This study describes the findings of a cyclic torque test and first clinical trial of a PGA scaffold for inducing meniscus-like tissue in humans. As the first step, biomechanical testing of the PGA scaffold was performed using a cyclic torque test. Six patients underwent arthroscopic implantation of the PGA scaffold. Furthermore, the patients underwent preoperative clinical, serological, radiographic, and magnetic resonance imaging examinations at 3, 6, and 12 months postoperatively. The patients also underwent a second-look arthroscopy 12 months after implantation. Torque increased with increasing cyclic loading. However, no structural damage to the sample was noted after 70,000 loading cycles. All patients showed improvement in pain, Lysholm scores, Tegner activity scores, International Knee Documentation Committee, and knee injury and osteoarthritis outcome. The second-look arthroscopy revealed that meniscal tissue had regenerated in 5 patients (83%). Radiography and magnetic resonance imaging confirmed no progression of degenerative joint disease. The PGA scaffold could tolerate shear forces, did not produce safety concerns, and may have therapeutic potentials for irreparable meniscal tears in humans.