Membrane Structure Research Articles

Effects of FMWCNT inclusions on PVDF/FMWCNT membranes structure and characteristics

Effects of FMWCNT inclusions on PVDF/FMWCNT membranes structure and characteristics

Mechanisms of Triton X-100 reducing the Ag+-resistance of Enterococcus faecalis.

To investigate the mechanism of Triton X-100 (TX-100) reducing the Ag+-resistance of Enterococcus faecalis (E. faecalis), and evaluate the antibacterial effect of TX-100+Ag+ against the induced Ag+-resistant E. faecalis (AREf). The minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) of AgNO3 against E. faecalis with/without TX-100 were determined to verify the enhanced antibacterial activity. Transmission electron microscopy (TEM) was used to observe the morphological changes of E. faecalis after treatment. The intra- and extracellular concentration of Ag+ in treated E. faecalis was evaluated using inductively coupled plasma mass spectrometer (ICP-MS). The changes in cell membrane potential and integrity of treated E. faecalis were also observed using the flow cytometer. Moreover, AREf was induced through continuous exposure to sub-MIC of Ag+ and the antibacterial effect of TX-100+Ag+ on AREf was further evaluated. The addition of 0.04% TX-100 showed maximal enhanced antibacterial effect of Ag+ against E. faecalis. The TEM and ICP-MS results demonstrated that TX-100 could facilitate Ag+ to enter E. faecalis through changing the membrane structure and integrity. Flow cytometry further showed the effect of TX-100 on membrane potential and permeability of E. faecalis. In addition, the enhanced antibacterial effect of TX-100+Ag+ was also confirmed on induced AREf. TX-100 can facilitate Ag+ to enter E. faecalis through disrupting the membrane structure and changing the membrane potential and permeability, thus reducing the Ag+-resistance of E. faecalis and enhancing the antibacterial effect against either normal E. faecalis or induced AREf.

X-ray scatterings to probe the structure and assembly of biomimetic membranes

X-ray scatterings to probe the structure and assembly of biomimetic membranes

Plant Flavonoids with Antimicrobial Activity against Methicillin-Resistant Staphylococcus aureus (MRSA).

Methicillin-resistant Staphylococcus aureus (MRSA) has become a serious threat to human public health and global economic development, and there is an urgent need to develop new antimicrobial agents. Flavonoids are the largest group of plant secondary metabolites, and the anti-S. aureus and anti-MRSA activities of flavonoids have now been widely reported. The aim of this Review is to describe plant-derived flavonoid active ingredients and their effects and mechanisms of inhibitory activity against MRSA in order to provide insights for screening novel antimicrobial agents. Here, 85 plant-derived flavonoids (14 flavones, 21 flavonols, 26 flavanones, 9 isoflavones, 12 chalcones, and 3 other classes) with anti-MRSA activity are reviewed. Among these flavonoids, flavones and isoflavones generally showed the most significant anti-MRSA activity (MICs: 1-8 μg/mL). The results of the present Review display that most of the flavonoids with excellent anti-MRSA activity were derived from Morus alba L. and Paulownia tomentosa (Thunb.) Steud. The antibacterial mechanism of flavonoids against MRSA is mainly achieved by disruption of membrane structures, inhibition of efflux pumps, and inhibition of β-lactamases and bacterial virulence factors. We hope this Review can provide insights into the development of novel antimicrobials based on natural products for treating MRSA infections.

Performances of PTFE and PVDF membranes in achieving the discharge limit of mixed anodic oxidation coating wastewaters treated by membrane distillation

The mixed wastewater generated by anodic oxidation coating facilities contains high levels of various contaminants, including iron, aluminum, conductivity, chemical oxygen demand (COD), and sulfate. In this study, the effectiveness of the membrane distillation (MD) process using polytetrafluoroethylene (PTFE) and polyvinylidene fluoride (PVDF) membranes was investigated to treat mixed wastewater from an anodized coating factory. The results indicate that both hydrophobic membranes effectively removed targeted contaminants. However, the PTFE membrane achieved higher removal efficiencies, with over 99% removal of sulfate, conductivity, iron, and aluminum, 85.7% of COD, and 86% of total organic carbon (TOC). In contrast, the PVDF membrane exhibited a significant decline in removal efficiency as the temperature increased and performed well only at lower feed temperatures. The PTFE membranes outperformed the PVDF membranes in treating chemically intensive anodic oxidation wastewaters. This superiority can be attributed to the PTFE membrane's morphology and structure, which are less influenced by feed water temperature and chemicals. Additionally, its slippery surface imparts anti-adhesion properties, effectively preventing membrane fouling, and maintaining the treated water quality and flux for longer operation time.

Laminated graphene oxide and hydrotalcite membranes via alternating spray-deposition with stable desalting performance

Laminated graphene oxide (GO) membrane has great potential for desalination, but achieving good stability in salt retention and water permeation is still a challenge. The “compact” sieving structure and the “loose” permeating structure of the GO membranes offer synergetic effects for high-performance desalination. Here, a composite desalination membrane involving two two-dimensional layered nanomaterials with opposite charges has been reported. The multi-layered GO (MLGO) and hydrotalcite (HT) were then alternated in a spray-coating on a PDA-modified substrate to construct multiple structures. Different assembly regions were identified by in-situ morphology monitoring, which showed that MLGO and HT were connected by electrostatic attractions. Also, the composite membrane showed high salt retention, permeability and long-term performance stability. The water flux of the composite membrane increased from 2.8 L m−2 h−1 bar−1 to 3.6–5.2 L m−2 h−1, which was due to the increases in the interlayer spacing distances and the introduction of new permeable spaces. After a 400 h continuous filtration test, the Na2SO4 retention remained stable. The water fluxes were in the range of 2.0–3.0 L m−2 h−1 bar−1, which corresponded to an increase by 42.9 %–114.3 % in comparison with the pure MLGO membrane. As compared with the MLGO membrane, molecular dynamics (MD) simulations revealed that more water molecules passed through the MLGO-HT membrane with a shorter pathway length and higher speed than MLGO membrane. The present study demonstrated the potential of a composite with 2D materials for desalination applications.

Zr-BTB nanosheets assist in optimizing the structure of forward osmosis membranes to enhance the lithium concentration performance

Recently, low-energy forward osmosis (FO) technology has been employed in the lithium concentration stage during the extraction of lithium from brine sources. The interlayer FO membrane is renowned for its exceptional structural characteristics; however, challenges remain in selecting suitable interlayer materials and exploring their control mechanisms on amine monomers. As interlayer materials, traditional 3D nanomaterials are prone to detachment, while traditional 2D materials without micropores can increase the transmission resistance of water molecules. This study introduces a novel FO membrane utilizing Zr-BTB nanosheets with 5.4 Å micropores as the interlayer material. Based on detection and simulation calculations, it was found that the increase in steric hindrance and interaction forces jointly slowed the diffusion of amine monomers in the presence of the Zr-BTB interlayer. This results in a thinner separation layer, facilitating water transport. The interlayer also plays crucial roles in preventing defective pore formation in the separation layer and assisting in intercepting salt ions. The Zr-BTB interlayer membrane exhibited a water flux of 29.14 L m−2 h−1 and a reverse salt flux of 0.16 g m−2 h−1, which are superior to those of many FO membranes reported in the field. The prepared membrane also has excellent performance in lithium concentration applications, and its separation mechanism was explored by MD simulations.

Doxorubicin induces phosphorylation of lamin A/C and loss of nuclear membrane integrity: A novel mechanism of cardiotoxicity

Lamin A/C, essential inner nuclear membrane proteins, have been linked to progeria, a disease of accelerated aging, and many other diseases, which include cardiac disorder. Lamin A/C mutation and its phosphorylation are associated with altering nuclear shape and size. The role of lamin A/C in regulating normal cardiac function was reported earlier. In the present study, we hypothesized that Doxorubicin (Dox) may alter total lamin A/C expression and phosphorylation, thereby taking part in cardiac injury. An in vitro cellular injury model was generated with Dox (0.1–10.0 μM) treatment on cardiomyoblast cells (H9c2) to prove our hypothesis. Increased size and irregular (ameboid) nucleus shape were observed in H9c2 cells after Dox treatment. Similarly, we have observed a significant increase in cell death on increasing the Dox concentration. The expression of lamin A/C and its phosphorylation at serine 22 significantly decreased and increased, respectively in H9c2 cells and rat hearts after Dox exposure. Phosphorylation led to depolymerization of the lamin A/C in the inner nuclear membrane and was evidenced by their presence throughout the nucleoplasm as observed by immunocytochemistry techniques. Thinning and perforation on the walls of the nuclear membrane were observed in Dox-treated H9c2 cells. LMNA-overexpression in H9c2 protected the cells from Dox-induced cell death, reversing all changes described above. Further, improvement of lamin A/C levels was observed in Dox-treated H9c2 cells when treated with Purvalanol A, a CDK1 inhibitor and N-acetylcysteine, an antioxidant. The study provides new insight regarding Dox-induced cardiac injury with the involvement of lamin A/C and alteration of inner nuclear membrane structure.

Human Umbilical Vein Endothelial Cells as a Versatile Cellular Model System in Diverse Experimental Paradigms: An Ultrastructural Perspective.

Human umbilical vein endothelial cells (HUVECs) are primary cells isolated from the vein of an umbilical cord, extensively used in cardiovascular studies and medical research. These cells, retaining the characteristics of endothelial cells in vivo, serve as a valuable cellular model system for understanding vascular biology, endothelial dysfunction, pathophysiology of diseases such as atherosclerosis, and responses to different drugs or treatments. Transmission electron microscopy (TEM) has been a cornerstone in revealing the detailed architecture of multiple cellular model systems including HUVECs, allowing researchers to visualize subcellular organelles, membrane structures, and cytoskeletal elements. Among them, the endoplasmic reticulum, Golgi apparatus, mitochondria, and nucleus can be meticulously examined to recognize alterations indicative of cellular responses to various stimuli. Importantly, Weibel-Palade bodies are characteristic secretory organelles found in HUVECs, which can be easily distinguished in the TEM. These distinctive structures also dynamically react to different factors through regulated exocytosis, resulting in complete or selective release of their contents. This detailed review summarizes the ultrastructural features of HUVECs and highlights the utility of TEM as a pivotal tool for analyzing HUVECs in diverse research frameworks, contributing valuable insights into the comprehension of HUVEC behavior and enriching our knowledge into the complexity of vascular biology.

Re-Examining the Role of Pulmonary Lipids in the Pathogenesis of Pulmonary Fibrosis.

Pulmonary fibrosis (PF) can be idiopathic or driven by a specific insult or disease process. Inflammation plays a role in the pathophysiology, the extent of which remains a longstanding topic of debate. More recently there has been increasing interest in a potential inciting role for aberrant lipid metabolism. Lipids are essential for the structure and function of all cell membranes but specifically in the lung for surfactant composition, intra and intercellular lipid mediators and lipofibroblasts. Clinically, there is evidence of increased lipid deposition in the subpleural space, and at a whole lung tissue level in PF. There is evidence of increased parenchymal lipid deposition and abnormal mediastinal fat shape on chest CT. A protective role for cholesterol lowering drugs including statins and ezetimibe has been described in PF. At a cellular level, fatty acid (FA), phospholipid (PL) and glucose metabolism are disordered, as is the production of lipid mediators. In this perspectives piece we put forward the argument that there is substantive clinical and biological evidence to support a role for aberrant lipid metabolism and lipid mediators in the pathogenesis of PF.

3D-printed porous zinc scaffold combined with bioactive serum exosomes promotes bone defect repair in rabbit radius.

Currently, the repair of large bone defects still faces numerous challenges, with the most crucial being the lack of large bone grafts with good osteogenic properties. In this study, a novel bone repair implant (degradable porous zinc scaffold/BF Exo composite implant) was developed by utilizing laser melting rapid prototyping 3D printing technology to fabricate a porous zinc scaffold, combining it under vacuum conditions with highly bioactive serum exosomes (BF EXO) and Poloxamer 407 thermosensitive hydrogel. The electron microscope revealed the presence of tea saucer-shaped exosomes with a double-layered membrane structure, ranging in diameter from 30-150 nm, with an average size of 86.3 nm and a concentration of 3.28E+09 particles/mL. In vitro experiments demonstrated that the zinc scaffold displayed no significant cytotoxicity, and loading exosomes enhanced the zinc scaffold's ability to promote osteogenic cell activity while inhibiting osteoclast activity. In vivo experiments on rabbits indicated that the hepatic and renal toxicity of the zinc scaffold decreased over time, and the loading of exosomes alleviated the hepatic and renal toxic effects of the zinc scaffold. Throughout various stages of repairing radial bone defects in rabbits, loading exosomes reinforced the zinc scaffold's capacity to enhance osteogenic cell activity, suppress osteoclast activity, and promote angiogenesis. This effect may be attributed to BF Exo's regulation of p38/STAT1 signaling. This study signifies that the combined treatment of degradable porous zinc scaffolds and BF Exo is an effective and biocompatible strategy for bone defect repair therapy.

Cystic Plate Approach Combined with Indocyanine Green（ICG） Fluorescence in Laparoscopic Anatomical Hepatectomy.

The in-depth understanding of the fine anatomy of the liver has promoted the development of modern liver surgery. With the rapid popularity of laparoscopic hepatectomy, the membrane structure of the liver and its ability to dissect the intra- and extra-hepatic vascular system more conveniently and accurately has been gradually emphasized. Exploring the value of extrahepatic sheath dissection of the hepatic pedicle in minimally invasive anatomical hepatectomy with cystic plate approach. This study aims to assess the benefits of integrating the cystic plate approach with real-time guided laparoscopic anatomical hepatectomy, in comparison with conventional laparoscopic anatomical hepatectomy. Based on the theory of cystic plate and hepatic portal plate, we have pioneered the fluorescence real-time guided cystic plate approach in hepatectomy. The article focuses on the anatomical knowledge and technical difficulties of anatomical hepatectomy with fluoroscopic laparoscopic cystic plate approach and explores the safety and practicality of the cystic plate approach in laparoscopic anatomical hepatectomy. Additionally, a retrospective cohort study was also conducted to compare the operation time, intraoperative blood loss, and postoperative complications between the cystic plate approach and the conventional approach during fluoroscopic laparoscopic hepatectomy. A total of 38 patients who met the inclusion criteria underwent laparoscopic hepatectomy between January 2019 and November 2022. No significant disadvantages were found in terms of operation time and intraoperative blood loss during the surgeries. Furthermore, the postoperative indications, including liver function indexes on the first postoperative day, WBC, and the postoperative hospital stay, were also not affected, thus proving the safety of the cystic approach. Importantly, through the cystic plate approach, the target liver pedicle was fully freed, and then the segments to be resected were precisely marked by positive or negative staining, followed by hepatectomy under real-time fluoroscopic guidance. This approach is extremely advantageous in anatomical liver segment resections, especially in right posterior lobe or hemi-hepatectomy, without increasing intraoperative bleeding or postoperative complication rates. This technique allows for easy and safe freeing of the target liver pedicle using membrane structures, and also allows for precise anatomical hepatectomy in combination with real-time fluoroscopic laparoscopic navigation.

A high step‐up DC/DC converter with capacitor‐clamped double‐switch structure for proton exchange membrane fuel cell application

A high step‐up DC/DC converter with capacitor‐clamped double‐switch structure for proton exchange membrane fuel cell application

Block copolymers as anion exchange membrane in fuel cells

Anion exchange membranes play a crucial part as the primary component of alkaline fuel cells, yet their optimization remains an ongoing endeavor. While research and development efforts have made strides in advancing anion exchange membranes, a pressing need exists to further refine their mechanical properties, ionic conductivity, and chemical stability, especially in comparison to proton exchange membranes. Block copolymers have emerged as promising candidates among the array of materials explored for enhancing anion exchange membranes due to their inherent advantages. These copolymers offer unparalleled flexibility in adjustment and boast superior mechanical properties, making them highly adaptable for modifying anion exchange membranes to meet desired specifications. In order to demonstrate the benefits of block copolymer, this paper primarily summarizes and examines the techniques for varying the material content, investigating composition to identify the block copolymer anion exchanging membrane with exceptional performance characteristics, and contrasting it with the random copolymer, polymer blend, and homopolymer exchange membrane. The results unequivocally demonstrate the efficacy of block copolymers in improving the material structure of exchange membranes by fine-tuning the polymer content. Notably, block copolymers outperform other copolymers in significantly enhancing the performance metrics of anion exchange membranes. In summary, studying block copolymers is a practical way to significantly enhance the performance and functionality of anionic exchange membranes, which will help the alkaline fuel cell industry move toward greater sustainability

Control of artificial membrane fusion in physiological ionic solutions beyond the limits of electroformation

Membrane fusion, merging two lipid bilayers, is crucial for fabricating artificial membrane structures. Over the past 40 years, in contrast to precise and controllable membrane fusion in-vivo through specific molecules such as SNAREs, controlling the fusion in-vitro while fabricating artificial membrane structures in physiological ionic solutions without fusion proteins has been a challenge, becoming a significant obstacle to practical applications. We present an approach consisting of an electric field and a few kPa hydraulic pressure as an additional variable to physically control the fusion, enabling tuning of the shape and size of the 3D freestanding lipid bilayers in physiological ionic solutions. Mechanical model analysis reveals that pressure-induced parallel/normal tensions enhance fusion among membranes in the microwell. In-vitro peptide-membrane assay, mimicking vesicular transport via pressure-assisted fusion, and stability of 38 days with in-chip pressure control via pore size-regulated hydrogel highlight the potential for diverse biological applications.

Fluorescence and Lifetime Imaging of Endoplasmic Reticulum Polarity Change During Ferroptosis.

As a new form of regulated cell death, ferroptosis is closely related to various diseases. Tracing ferroptosis related biological behavior is helpful to better understand this process and its related biology. Considering that ferroptosis is featured with remarkable lipid peroxidation which can easily change the membranes' compositions and structures, it is potential to detect intracellular environmental changes for direct assessment of ferroptosis. In view of the close relationship between endoplasmic reticulum (ER) and ferroptosis, we designed an ER-targeted and polarity-sensitive fluorescent probe SBD-CH, which has superior photostability and can respond to polarity with high selectivity without the affection of viscosity. SBD-CH can monitor the trend of ER polarity during ferroptosis by confocal laser scanning microscopy (CLSM), and analyze the distribution of polarity in ferroptosis by fluorescence lifetime imaging microscopy (FLIM). During Erastin induced ferroptosis, the polarity of ER in HT-1080 cells increased and the polarity distribution in ER was more dispersed. Our work provides an effective strategy for evaluating the process of ferroptosis by monitoring the changes of ER polarity.

Controlling the polymorphs of PVDF membranes: Effects of a salt additive on PVDF polarization during phase separation processes

Polyvinylidene fluoride (PVDF) membranes, acclaimed for their outstanding chemical resistance, thermal stability, and mechanical properties, play a crucial role in diverse industrial purification applications. While various methods have been employed for fabricating PVDF membranes such as thermally induced, evaporation-induced, vapor-induced, and nonsolvent-induced phase separation processes, controlling the polarity of PVDF chains using these techniques remains challenging. Recent studies have shown that the nonpolar α-phase PVDF is susceptible to organic acid fouling owing to hydrophobic interactions, whereas the β-phase PVDF has demonstrated polarity and offers antifouling properties. Herein, porous PVDF membranes predominantly composed of the β-phase were successfully fabricated by incorporating a small amount of LiCl salt into the PVDF dope solution. The addition of LiCl influences ion–dipole moments between ions and PVDF during phase separation, simultaneously affecting the PVDF chain arrangement and membrane morphology. Since the LiCl additive alters both the pore size and structure of PVDF membranes, both freestanding and non-woven supported membranes were prepared and characterized to assess the effects of polarity and pore size on fouling tendency. Characterizations of prepared PVDF membranes revealed considerable changes in the PVDF polymorph, membrane morphology, pore size, and antifouling properties upon introducing the salt additive. Our findings imply that β-phase–dominant PVDF membranes can be effectively utilized in water purification applications.

Electrospun Membranes Based on Quaternized Polysulfones: Rheological Properties-Electrospinning Mechanisms Relationship.

Composite membranes based on a polymer mixture solution of quaternized polysulfone (PSFQ), cellulose acetate phthalate (CAP), and polyvinylidene fluoride (PVDF) for biomedical applications were successfully obtained through the electrospinning technique. To ensure the polysulfone membranes' functionality in targeted applications, the selection of electrospinning conditions was essential. Moreover, understanding the geometric characteristics and morphology of fibrous membranes is crucial in designing them to meet the performance standards necessary for future biomedical applications. Thus, the viscosity of the solutions used in the electrospinning process was determined, and the morphology of the electrospun membranes was examined using scanning electron microscopy (SEM). Investigations on the surfaces of electrospun membranes based on water vapor sorption data have demonstrated that their surface properties dictate their biological ability more than their specific surfaces. Furthermore, in order to understand the different macromolecular rearrangements of membrane structures caused by physical interactions between the polymeric chains as well as by the orientation of functional groups during the electrospinning process, Fourier transform infrared (FTIR) spectroscopy was used. The applicability of composite membranes in the biomedical field was established by bacterial adhesion testing on the surface of electrospun membranes using Escherichia coli and Staphylococcus aureus microorganisms. The biological experiments conducted establish a foundation for future applications of these membranes and validate their effectiveness in specific fields.

Streptomyces virginiae XDS1-5, an antagonistic actinomycete, as a biocontrol to peach brown rot caused by Monilinia fructicola.

Peach brown rot, caused by the pathogen Monilinia fructicola, represents a significant postharvest infectious disease affecting peach fruit. This disease is responsible for a substantial increase in fruit decay rates, leading to significant economic losses, often exceeding 50%. Currently, there is a growing interest in identifying biocontrol agents to mitigate peach brown rot, with a predominant interest in Bacillus species. In this investigation, we isolated 410 isolates of actinomycetes from non-farmland ecosystem soil samples. Subsequently, 27 isolates exhibiting superior inhibitory capabilities were selected. Among these, strain XDS1-5 demonstrated the most robust fungistatic effect against brown rot disease, achieving an 80% inhibition rate in vitro and a 66% inhibition rate in vivo. XDS1-5 was identified as belonging to the Streptomyces virginiae species. Furthermore, a fermentation filtrate of XDS1-5 exhibited the ability to metabolize 34.21% of the tested carbon sources and 7.37% of the tested nitrogen sources. Particularly noteworthy was its capacity to disrupt the cell membrane structure directly, leading to increased cell membrane permeability and cytoplasmic leakage. Additionally, our investigation indicated that indoline, a metabolite produced by XDS1-5, played a pivotal role in inhibiting the growth of M. fructicola. In summary, our study has identified a biocontrol actinomycete, XDS1-5, with the potential to effectively inhibit postharvest brown rot disease in peaches. This finding holds great significance for the biological control of peach brown rot, offering promising prospects for mitigating the economic losses associated with this devastating disease. © 2024 Society of Chemical Industry.

Antifungal activity of Cinnamomum camphora essential oil against Fusarium oxysporum and its application on postharvest blueberry fruits preservation

SummaryPostharvest decay of blueberry fruits caused by Fusarium oxysporum (F. oxysporum) results in significant losses during logistics. To avoid chemical residue issues associated with synthetic fungicides, present study investigated the antifungal activity of Cinnamomum camphora essential oil (CEO) against Fusarium oxysporum (F. oxysporum) in postharvest blueberry fruits. CEO effectively disrupted cell membrane integrity, impaired ergosterol structure, restricted ATPase activity and inhibits mycelial growth. Blueberries treated with a 0.2% CEO‐based coating demonstrated improved overall sensory acceptability, enhanced firmness, increased total soluble solids and titratable acidity, and reduced decay rate. CEO also decreased malondialdehyde contents while promoting ascorbic acid and glutathione levels and activating antioxidant enzymes, such as superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD), maintaining cell membrane structure and enhancing resistance against F. oxysporum infection. The findings suggest that CEO serves as an eco‐friendly agent for mitigating primary fungal invasion in blueberries during postharvest storage.