Median Harris Hip Score Research Articles

GAIT CHANGES FOLLOWING CERAMIC-ON-CERAMIC HIP RESURFACING ARTHROPLASTY: A PROSPECTIVE STUDY

A ceramic-on-ceramic hip resurfacing implant (cHRA) was developed and introduced in an MHRA-approved clinical investigation to provide a non metallic alternative hip resurfacing product. This study aimed to examine function and physical activity levels of patients with a cHRA implant using subjective and objective measures both before and 12 months following surgery in comparison with age and gender matched healthy controls.Eighty-two unilateral cHRA patients consented to this study as part of a larger prospective, non-randomised, clinical investigation. In addition to their patient reported outcome measures (PROMs), self- reported measures of physical activity levels and gait analysis were undertaken both pre- operatively (1.5 weeks) and post operatively (52 weeks). This data was then compared to data from a group of 43 age gender and BMI matched group of healthy controls. Kinetics and kinematics were recorded using an instrumented treadmill and 3D Motion Capture. Statistical parametric mapping was used for analysis.cHRA improved the median Harris Hip Score from 63 to 100, Oxford Hip score from 27 to 48 and the MET from 5.7 to 10.3. cHRA improved top walking speed (5.75km vs 7.27km/hr), achieved a more symmetrical ground reaction force profile, (Symmetry Index value: 10.6% vs 0.9%) and increased hip range of motion (ROM) (31.7° vs 45.9°). Postoperative data was not statistically distinguishable from the healthy controls in any domain.This gait study sought to document the function of a novel ceramic hip resurfacing, using those features of gait commonly used to describe the shortcomings of hip arthroplasty. These features were captured before and 12 months following surgery. Preoperatively the gait patterns were typical for OA patients, while at 1 year postoperatively, this selected group of patients had gait patterns that were hard to distinguish from healthy controls despite an extended posterior approach. Applications for regulatory approval have been submitted.

Functional Improvement and Patient Satisfaction Following Conversion of Fused Hip to Total Hip Arthroplasty

BackgroundThis study aimed to determine the clinical outcomes, predictors of suboptimal functional improvement, and factors influencing patient satisfaction following conversion of a fused hip to total hip arthroplasty (THA). MethodsA retrospective analysis of clinical and radiographic data was performed on 83 patients (83 hips) who underwent fused hip conversion to THA. Implant survival and predictors of poor functional outcome (Harris hip score < 70) were analyzed. In addition, factors associated with patient dissatisfaction (visual analog scale < 25th percentile) were analyzed in 63 patients (63 hips) who completed a patient-reported outcome measures questionnaire. ResultsThe median Harris hip score improved from 55 (range, 18 to 77) to 78 (range, 36 to 100) at a mean follow-up of 10.2 ± 4.8 years (P < .001). Implant survival was 97.4% at 10 years and 91.3% at 20 years, with any revision as the endpoint. Multivariate analysis identified preoperative reliance on mobility aids as an independent predictor of poor functional outcome (P = .021). There were 48 of 63 patients (76%) satisfied (satisfaction visual analog scale ≥80) with the operated hip. Demographics and preoperative/postoperative clinical data did not differ between satisfied and unsatisfied patients. Among the patient-reported outcome measures, the Forgotten Joint Score-12 emerged as an independent discriminator of patient satisfaction. ConclusionsConversion of a fused hip to THA provides functional improvement, favorable implant survival, and high patient satisfaction. However, patients dependent on mobility aids may experience suboptimal functional recovery, underscoring the need for careful preoperative counseling and patient selection.

Reconstruction of Paprosky IIIB acetabular defects with porous tantalum shells and augments using the footing technique.

The use of a porous metal shell supported by two augments with the 'footing' technique is one solution to manage Paprosky IIIB acetabular defects in revision total hip arthroplasty. The aim of this study was to assess the medium-term implant survival and radiological and clinical outcomes of this technique. We undertook a retrospective, two-centre series of 39 hips in 39 patients (15 male, 24 female) treated with the 'footing' technique for Paprosky IIIB acetabular defects between 2007 and 2020. The median age at the time of surgery was 64.4 years (interquartile range (IQR) 54.4 to 71.0). The median follow-up was 3.9 years (IQR 3.1 to 7.0). The cumulative medium-term survival of the acetabular construct was 89%. Two hips (5.1%) required further revision due to shell loosening, one hip (2.6%) due to shell dislocation, and one hip (2.6%) due to infection. The median Harris Hip Score improved significantly from 47 points (IQR 41.5 to 54.9) preoperatively to 80 points (IQR 73.5 to 88.6) at the latest follow-up (p < 0.001). The reconstruction of Paprosky IIIB acetabular defects with porous tantalum shells and two augments using the 'footing' technique showed excellent medium-term results. It is a viable option for treating these challenging defects.

Treatment of old femoral neck fractures in young adults with a medial buttress plate combined with three cannulated screws and iliac autograft: Surgical technique and preliminary results

ObjectivesWhether the application of MBP plus cannulated screws works for old femoral neck fractures (OFNF) is unknown. The purpose of this study is to present a case series of OFNF in young adults using calcar buttress plate and three cannulated screws with autologous iliac bone grafts. MethodsWe conducted a retrospective study of eleven young patients (6 males and 5 females) with femoral neck fractures who were treated with open reduction and internal fixation at a single center between 2013 and 2021. The subjects had trauma-to-surgery intervals longer than 3weeks and all were fixed with a calcar buttress plate combined with three cannulated screws, which were supplemented by autologous iliac bone grafts. ResultsAll eleven cases achieved radiological union under the surgery technique, which occurred on average at 4.46±1.29months after surgery. Complications included femoral neck shortening in all cases, heterotopic ossification in three cases, and osteonecrosis of the femoral head in two cases. One patient with osteonecrosis of the femoral head received total hip arthroplasty. In follow-ups of 24–52months, the median Harris hip score was 81.64±15.39. ConclusionsThe medial buttress plate in combination with three cannulated screws and iliac autograft may be a good choice for treating old femoral neck fractures in young adults. Level of evidenceIV, case series.

Short- to Mid-Term Clinical and Radiological Results of Selective Laser Melting Highly Porous Titanium Cup in Primary Total Hip Arthroplasty.

(1) Background: The aim of this study was to evaluate short- to mid-term clinical and radiological results in patients undergoing primary total hip arthroplasty (THA) with the use of a Selective Laser Melting 3D-printed highly porous titanium acetabular cup (Jump System Traser®, Permedica Orthopaedics). (2) Methods: We conducted a retrospective study and collected prospective data on 125 consecutive patients who underwent primary THA with the use of highly porous titanium cup. Each patient was evaluated preoperatively and postoperatively with a clinical and radiological assessment. (3) Results: The final cohort consisted of 104 patients evaluated after a correct value of 52 (38-74) months. The median Harris Hip Score (HHS) significantly improved from 63.7 (16-95.8) preoperatively to 94.8 (38.2-95.8) postoperatively (p < 0.001), with higher improvement associated with higher age at surgery (β = 0.22, p = 0.025). On postoperative radiographs, the average acetabular cup inclination and anteversion were 46° (30°-57°) and 15° (1°-32°), respectively. All cups radiographically showed signs of osseointegration with no radiolucency observed, or component loosening. (4) Conclusions: The use of this highly porous acetabular cup in primary THA achieved excellent clinical, functional, and radiological results at mid-term follow-up. A better clinical recovery can be expected in older patients. The radiological evaluation showed excellent osseointegration of the cup with complete absence of periprosthetic radiolucent lines.

Modified Anterolateral Minimally Invasive Surgery (ALMIS) for Total Hip Replacement: Anatomical Considerations, Range of Motion and Clinical Outcomes.

Background and Objectives: In the modified anterolateral minimally invasive surgery (ALMIS) for total hip arthroplasty (THA), the intermuscular plane between the tensor fasciae latae and the gluteus maximus (GM) is exposed, while the anterior ¼ of the GM is detached. There are scarce data regarding this surgical approach. The purpose of the present study is to thoroughly describe this approach, encompassing the anatomical background, and to present the results of a retrospective two-center study of 603 patients. Materials and Methods: The present study includes a two-center retrospective observational cohort of 603 patients undergoing the ALMIS technique with minimum 5-year follow-up. Demographics were recorded, while range of motion (ROM) of the hip joint and the Harris Hip Score (HHS) were evaluated preoperatively, at 1, 3 and 12 months postoperatively and at the final follow-up (>5 years). Surgery-related complications were also recorded. Results: The studied population's mean age was 69.4 years, while most of them were females (397; 65.8%). The mean follow-up was 6.9 years. The median HHS at the 1-month follow-up was 74, compared to the 47 preoperatively (p-value < 0.0001). At the final follow-up, median HHS was 94. At the 1-month follow-up, mean adduction was 19.9° (compared to 15.4° preoperatively; p < 0.0001), mean abduction 24.3° (18.2° preoperatively; p < 0.0001), mean flexion 107.8° (79.1° preoperatively; p < 0.0001), mean external rotation 20.1° (12.1° preoperatively; p < 0.0001) and mean internal rotation 15.3° (7.2° preoperatively; p < 0.0001). ROM further improved until the final follow-up; mean adduction reached 22°, mean abduction 27.1°, mean flexion 119.8°, mean external rotation 24.4° and mean internal rotation 19.7°. Regarding complications, 1.3% of the sample suffered anterior traumatic dislocation, in 1.8% an intraoperative femoral fracture occurred, while 1.2% suffered periprosthetic joint infection. Conclusions: The modified ALMIS technique exhibited excellent clinical outcomes at short-, mid- and long-term follow-up, by significantly improving hip ROM and the HHS. Careful utilization of this technique, after adequate training, should yield favorable outcomes, while minimal major complications should be expected.

Staged Revision Hip Arthroplasty With Femoral Impaction Bone Grafting for Prosthetic Joint Infections: Radiostereometric Analyses and Clinical Outcomes at Minimum 5-Year Follow-Up

BackgroundThere are ongoing concerns regarding the use of bone graft following prosthetic joint infection and subsequent implant subsidence. The aim of this study was to determine whether the use of a cemented stem combined with femoral impaction bone grafting (FIBG) at second stage revision for infection results in stable femoral stem fixation, determined by accurate methods, and good clinical results. MethodsA prospective cohort of 29 patients underwent staged revision total hip arthroplasty for infection using an interval prosthesis followed by FIBG at the final reconstruction. The mean follow-up was 89 months (range, 8 to 167 months). Femoral implant subsidence was measured with radiostereometric analysis. Clinical outcomes included the Harris Hip Score, Harris Pain score and Société Internationale de Chirurgie Orthopédique et de Traumatologie activity scores. ResultsAt 2-years follow-up the median stem subsidence relative to femur was −1.36 mm (range, −0.31 to −4.98), while the cement subsidence relative to femur was −0.05 mm (range, 0.36 to −0.73). At 5-years follow-up, the median stem subsidence relative to femur was −1.89 mm (range, −0.27 to −6.35), while the cement subsidence relative to femur was −0.06 mm (range, 0.44 to −0.55). There were 25 patients who were confirmed infection-free after the second stage revision with FIBG. The median Harris Hip Score improved from 51 pre-operatively to 79 at 5 years (P = .0130), and Harris Pain score from 20 to 40 (P = .0038). ConclusionsStable femoral component fixation can be achieved with FIBG when reconstructing the femur after revision for infection without compromising infection cure rates and patient-reported outcomes.

Medial wall reconstruction using metal disc augments in revision total hip arthroplasty.

Medial acetabular bone defects are frequently encountered in revision total hip arthroplasty (THA), but few studies have focused on their reconstruction. This study aimed to report the radiographic and clinical results after medial acetabular wall reconstruction using metal disc augments in revision THA. Forty consecutive revision THA cases using metal disc augments for medial acetabular wall reconstruction were identified. Post-operative cup orientation, the centre of rotation (COR), stability of acetabular components and peri-augments osseointegration were measured. The pre-operative and post-operative Harris Hip Score (HHS) and Western Ontario and McMaster Universities Arthritis Index (WOMAC) were compared. The mean post-operative inclination and anteversion were 41.88 ± 6.70° and 16.73 ± 5.35°, respectively. The median vertical and lateral distance between the reconstructed CORs and the anatomic CORs were -3.45 mm (interquartile range [IQR]: -11.30 mm, -0.02 mm) and 3.18 mm (IQR: -0.03 mm, 6.99 mm). Thirty-eight cases completed the minimum twoyear clinical follow-up, whereas 31 had a minimum twoyear radiographic follow-up. Acetabular components were radiographically stable with bone ingrowth in 30 cases (30/31, 96.8%) while one case was classified as radiographic failure. Osseointegration around disc augments was observed in 25 of 31 cases (80.6%). The median HHS improved from 33.50 (IQR: 27.50-40.25) pre-operatively to 90.00 (IQR: 86.50-96.25) (p < 0.001), whereas the median WOMAC significantly improved from 38.02 (IQR: 29.17-46.09) to 85.94 (IQR: 79.43-93.75) (p < 0.001). In revision THA with severe medial acetabular bone defect, disc augments could provide favorable cup position and stability, peri-augments osseointegration, with satisfactory clinical scores.

Taper-wedge stem suitable for anterior approach total hip arthroplasty: Adequate biomechanical reconstruction parameters and excellent clinical outcome at mid-term follow-up.

The direct anterior approach (DAA) for total hip arthroplasty (THA) is a less invasive and muscle-sparing approach that seems to improve early function and patient satisfaction. Several studies, however, have reported high complication and revision rates due to the technical difficulties related to the femoral preparation. To evaluate the usefulness and safety of a new stem equipped with a morphometric design and a size-specific medial curvature in DAA for THA. This retrospective study was based on 130 patients that underwent mini-invasive DAA procedures for THA using the Accolade II stem. A total of 144 procedures were included in the assessment, which was based on postoperative complications, survival rates, functional parameters, and patient related outcomes. Overall complications were recorded in 6 procedures (4.2%). There were no complications related to the stem implantation and no intraoperative fractures. Only one patient was revised for deep infection. On radiographs, biomechanical hip reconstruction was satisfactory and no stem showed any subsidence greater than 2 mm. Full osseointegration based on Engh scores was seen in all of the implanted stems. Median Harris hip score at final follow-up was 99 points (range 44-100 points), which resulted excellent in 91.3% of patients. The median values of the osteaorthritis outcome score ranged from 87.5 to 95. The mid-term positive outcomes and low complication rate in our consecutive series of patients support the safety and suitability of this new stem design in DAA for THA.

Greater trochanter fixed with a claw plate and cable system in complex primary and revision total hip arthroplasty: long-term follow-up.

Maintaining continuity of the greater trochanter and restoring abductor function are of paramount importance in primary and revision total hip arthroplasty. Failure to rigidly fix the greater trochanter can lead to failure. Because of the lack of reports on the clinical results of greater trochanter fixation with a claw plate and cable system, we aimed to analyze the indications for the use of such a system that produces the best clinical results. We retrospectively studied 41 consecutive patients who had undergone primary or revision total hip arthroplasty at our institution between January 2004 and December 2014 using a claw plate and cable system to achieve stable fixation of the greater trochanter. The mean follow-up duration was tenyears. The median Harris hip score improved from 47 points before surgery to 87 points after surgery (p < 0.01). Significant improvements were observed in the range of motion, hip function, and routine activity. Osseous and fibrous union occurred in all patients, and one patient had severe complications (sciatica). Based on the Beals and Tower classification, 67%, 21%, and 13% of outcomes were considered excellent, good, and poor, respectively. Our data support the use of a claw plate and cable system for greater trochanter fixation in complex primary and revision hip arthroplasty. The system showed promising results in patients with floating greater trochanters, intertrochanteric fractures requiring extra devices to maintain rotational stability, and extended trochanteric osteotomy fragments with a weakened proximodistal junction. The use of this system should be further investigated and compared to other methods.

The outcome of antegrade intramedullary nail fixation of traumatic diaphyseal fractures of the femur in a tertiary care trauma center in Sri Lanka

Introduction: We evaluated the outcome, functional recovery, and complications of intramedullary nailing for fractures of the femoral shaft fractures. Methods: A prospective observational study was conducted at the National Hospital of Sri Lanka. Patients with isolated femoral shaft fractures undergoing intramedullary nailing were followed up prospectively to assess the factors associated with better functional recovery (measured by Harris Hip Score (HHS) and Western Ontario and McMaster University osteoarthritis index (WOMAC)). Results: Of 46 patients, the median age was 40(IQR=26-59) years. Majority had simple (n=34, 73.9%), closed (n=39,84.8%) fractures while seven (15.2%) had Gustilo Type I open fractures. Surgery was performed at a median of 9.5(IQR=6-14) days after the injury. Approximately two-thirds of the patients required reamed nailing (n=30, 65.2%). Three patients developed surgical site infections. X-rays obtained at four months demonstrated features of non-union in 13(28.3%). Leg length discrepancy (LLD) was present in 16(34.8%), and rotational deformity in one patient. Full and partial weight-bearing at six weeks was achieved in six and 23 patients respectively while 17 patients were unable to bear weight. The median HHS and WOMAC at four months were 66.5 and 36, respectively. Patients with proximal or distal diaphyseal fractures, female patients and those with full weight-bearing six weeks showed the best WOMAC index. Conclusion: Proximal or distal diaphyseal fractures, female sex and ability to bear weight at six weeks post-surgery were associated with better functional outcomes at four months postoperatively. Surgeons should be mindful of the limitations of resource- poor settings which could affect the surgical outcomes.

Birmingham Hip Resurfacing for osteoarthritis — a Canadian retrospective cohort study with a minimum 10-year follow-up

Background:Young men with osteoarthritis of the hip are a growing segment of the population requiring arthroplasty, and there is compelling evidence that the Birmingham Hip Resurfacing (BHR) system provides good functional outcomes and durability in young, active men. We reviewed the survivorship and clinical outcomes of patients who underwent BHR with a minimum follow-up of 10 years.Methods:We analyzed survivorship using the Kaplan–Meier method. Functional scoring was performed using the Harris Hip Score (HHS), the University of California, Los Angeles (UCLA) Activity Score, and a visual analogue scale (VAS).Results:In total, 211 patients (243 hips) were included in the study. Of these, 107 patients (127 hips) were available for long-term clinical follow-up, with a mean duration of 12.4 ± 1.4 years. The proportion of male participants with BHRs surviving past 13 years was 93.8% (95% confidence interval [CI] 87.9%–100%) compared with 87% (95% CI 77.8%–97.3%) of female patients. Eleven patients (11 hips) underwent BHR revision. Upon final follow-up, the median HHS was 93.9 in males and 93.6 in females (p = 0.27); median UCLA Activity Score was 8.2 in males and 7.2 in females (p < 0.001), and the median VAS score was 81.9 in males and 81.3 in females (p = 0.35). The median acetabular component inclination was 45.5° ± 6.0° (range 34.6°–57.2°) in males and 44.6° ± 5.9° (range 29°–58.9°) in females. The most common femoral head size was 50 mm with a 56 mm or 58 mm cup (36.3%).Conclusion:This study confirms that BHR provides good to excellent functional outcomes, lasting functional improvements, and acceptable durability beyond 10 years in men. Survivorship following BHR is inferior in women; however, HHS and VAS scores were similar in women and men.

Long-Term Outcomes of Staged Revision Surgery for Chronic Periprosthetic Joint Infection of Total Hip Arthroplasty.

Periprosthetic joint infection (PJI) is a serious complication of total hip arthroplasty. Staged revision surgery is considered effective in eradicating PJI. We aimed to determine the rate of infection resolution after each stage of staged revision surgery (first stage, repeat first stage, second stage, excision arthroplasty, and reimplantation) and to assess functional outcomes and the mortality rate at ten years in a consecutive series of 30 chronic PJI of total hip arthroplasties. Infection resolution was defined as no clinical nor laboratory evidence of infection at 24 months after the last surgery and after a minimum of 12 months following cessation of antimicrobial treatment. Four patients died within 24 months of their final surgery. Nineteen patients, 73% (worst-case analysis (wca) 63%), were infection free after 1 surgery; 22 patients, 85% (wca 73%), were infection free after 2 surgeries; and 26 patients, 100% (wca 87%), were infection free after three and four surgeries. The median Harris Hip Score was 41 prior to first revision surgery and improved to 74 at twelve months and 76 at ten years after the final surgery. Thirteen patients died at a mean of 64 months from first revision, giving a mortality rate of 43% at ten years, which is approximately 25% higher than that of an age-matched general population. The results show that with repeated aggressive surgical treatment, most PJIs of the hip are curable. Ten years after successful treatment of PJI, functional outcomes and pain are improved and maintained compared to before initial surgery, but this must be balanced against the high 10-year mortality. Level of evidence: cohort studies.

Patient-Specific Implants for Pelvic Tumor Resections

Introduction Limb salvage surgery for periacetabular malignancies is technically demanding and associated with a considerable likelihood of postoperative complications and surgical revision. Reconstruction using custom-made implants represents the treatment of choice. This study was conducted to analyze treatment outcomes of custom-made implants in a single orthopaedic tumor center. Patients and Methods Twenty patients with a histologically verified periacetabular malignancy and a median follow up time of 5 (1–17) years were included. Results The median number of revision surgeries per patient was 1.5 (0–7). Complications were dislocations in 3 patients, aseptic loosening in 4 patients, deep infections in 9 patients, thromboembolic events in 5 patients and sciatic nerve lesions in 4 patients. Overall survival was 77% after one year, 69% after two years and 46% after five years. Median Harris Hip Score was 81 (37–92) points at last follow up. Conclusion Although internal hemipelvectomy and reconstruction using custom-made implants is linked with a high risk of postoperative complications, good functional outcomes can be regularly achieved. This information may help treating surgeons to find adequate indications, as eligible patients need to be critically selected and integrated into the decision-making process.

Short stem hip arthroplasty via the minimally invasive direct anterior approach.

Tissue-sparing, minimally invasive hip arthroplasty via the direct anterior approach (DAA) using apartially neck-preserving, calcar-guided short stem. Primary and secondary osteoarthritis of the hip due to developmental dysplasia, femoroacetabular impingement, femoral head necrosis or trauma sequelae. Severe osteoporosis, active infection, American Society of Anesthesiologists (ASA) > III, large metaphyseal bone defects, severe metaphyseal deformities, Dorr typeC femur. Supine position on astandard operating table without extension device. Classic DAA skin incision or bikini incision distal to the inguinal fold. Blunt dissection entering the Hueter interval. Capsulotomy with capsule preservation or partial capsulectomy. Intraoperatively, it is crucial to adhere to the preoperatively planned angle and height of the femoral neck osteotomy. During femoral head removal and acetabular preparation, care must be taken to avoid iatrogenic damage to the remaining neck. After cup positioning, femoral access is achieved by release of superior capsular structures. During opening of the medullary canal and broaching, femoral torsion and axis have to be taken into account for correct rotational and axial alignment. Femoral broaches are inserted in an ascending series of sizes until the last broach is firmly lodged and is in direct contact with the antero-medial femoral neck cortex. Fluoroscopic control in two planes to check for femoral anatomic and overall offset and assess whether the implant is adequately seated with cortical support at the calcar, the distal lateral and the dorsal cortex. Implantation of the definitive implants, local infiltration analgesia and wound closure. Between 1/2011 and 12/2016 60patients (24female, 36male; mean age 44years) were treated with apartially neck-preserving short stem via the described approach. Seven patients underwent abi-lateral procedure. Thus, 67procedures were analysed in this retrospective cohort study. Mean follow-up was 70months (range 28-93). The median Harris Hip Score was48 (range 11-88) preoperatively and98 (range 80-100) postoperatively. The minimally invasive implantation of apartially neck-preserving stem via DAA provides asafe technique with good to excellent clinical results in the mid-term.

Results of the First U.S. FDA-Approved Hip Resurfacing Device at 10-Year Follow-up.

The BIRMINGHAM HIP Resurfacing (BHR) system is a metal-on-metal hip implant system approved by the U.S. Food and Drug Administration in 2006. The approval required a multicenter, prospective, post-market-approval study. Our purpose is to report the current results at 10 years of follow-up. Between October 2006 and December 2009, 280 primary BHR procedures were performed at 5 sites. Outcome measures included Kaplan-Meier survivorship, reasons for revision, radiographic component stability and osteolysis, Harris hip scores, and metal levels including cobalt and chromium. The mean age at the time of the procedure was 51.3 ± 7.1 years, 74% (206) of 280 BHRs were implanted in male patients, the mean body mass index was 27.8 ± 4.4 kg/m2, and 95% (265) of 280 hips had a primary diagnosis of osteoarthritis. The mean follow-up among all 280 hips was 9.0 ± 2.5 years. Prior to 10-year follow-up, 20 hips were revised and 5 patients representing 5 hips had died. Among the remaining 255 hips, 218 (85%) met the minimum follow-up of 10 years. The 10-year survival free from all-cause component revision was 92.9% (95% confidence interval [CI], 89.8% to 96.1%) for all hips and 96.0% (95% CI, 93.1% to 98.9%) among male patients <65 years old at the time of the procedure. Reasons for revision included femoral loosening (n = 5), femoral neck fracture (n = 3), pseudotumor (n = 3), osteolysis (n = 2), and acetabular loosening (n = 1), as well as 6 revisions for a combination of pain, noise, or metal levels. Among unrevised hips, the median Harris hip score improved from preoperatively (59) to 1 year postoperatively (99; p < 0.001) and remained stable through 10 years postoperatively (99; p = 0.08). Radiographically, 5% (10) of 218 unrevised hips had osteolysis with no component migration. Median metal levels had increased at 1 year postoperatively (cobalt: from 0.12 ppb preoperatively to 1.5 ppb at 1 year postoperatively, p < 0.001; chromium: from 0.6 ppb preoperatively to 1.7 ppb at 1 year postoperatively, p < 0.001), then remained stable through 5 years before slightly decreasing at 10 years postoperatively (cobalt: 1.3 ppb, p < 0.001; chromium: 1.4 ppb, p < 0.001). This prospective, multicenter, post-market-approval study demonstrated that the BHR implant system is safe and effective through 10 years of follow-up, particularly among young male patients. Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Midterm Results of Primary Exeter Cemented Stem in a Select Patient Population.

Most North American surgeons predominantly use uncemented stems in primary total hip arthroplasties (THAs) and reserve cemented stems for selected older patients and those with poor bone quality. However, data on this "selective use" strategy for cemented stems in the population at risk for periprosthetic fracture and implant loosening are limited. The purpose of this study was to describe implant survivorship, complications, and radiographic results of a specific collarless, polished, tapered cemented stem (Exeter; Stryker) used selectively in a predominantly elderly population undergoing primary THA. We identified 386 patients who underwent a total of 423 primary THAs with selectively utilized Exeter stems for the treatment of osteoarthritis between 2006 and 2017. In the same time period, 11,010 primary THAs were performed with uncemented stems and 961 with non-Exeter cemented stems. The mean patient age was 77 years, 71% were female, and the mean body mass index was 29 kg/m2. Competing risk analysis accounting for death was utilized to determine cumulative incidences of revision and reoperation. The mean follow-up was 5 years (range, 2 to 12 years). The 10-year cumulative incidence of any femoral component revision in this patient cohort was 4%, with 10 stems revised at the time of the latest follow-up. There were no intraoperative femoral fractures. The indications for revision were postoperative periprosthetic femoral fracture (n = 6), dislocation (n = 3), and infection (n = 1). There were no revisions for femoral loosening. The 10-year cumulative incidence of reoperation was 10%. The 10-year cumulative incidence of Vancouver B periprosthetic femoral fracture was 2%. Radiographically, there were no cases of aseptic loosening or osteolysis. There was a significant improvement in median Harris hip score, from 53 preoperatively to 92 at a mean follow-up of 5 years (p < 0.001). The strategy of selectively utilizing a collarless, polished, tapered cemented stem produced a low (4%) cumulative incidence of stem revision at 10 years postoperatively and resulted in no cases of aseptic loosening. The use of the Exeter stem did not eliminate postoperative femoral fractures in this predominantly elderly, female patient population. Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Minimum 7-year Follow-up of A Porous Coated Trabecular Titanium Cup Manufactured with Electron Beam Melting Technique in Primary Total Hip Arthroplasty.

ObjectivesTo investigate the cup survivorship, patient satisfaction level, clinical function, and radiographic outcomes of patients who underwent total hip arthroplasty (THA) using electron beam melting (EBM)‐produced porous coated titanium cups at mid‐term follow up.MethodsA total of 32 patients (32 hips) from five hospitals in China who underwent primary THA using EBM‐produced trabecular titanium cups between May and December 2012 were retrospectively reviewed. The inclusion criteria were: (i) patients who underwent THA with the use of EBM‐produced cups with possible 7‐year follow up; and (ii) patients with follow‐up information, including the cup survivorship, patient satisfaction level, and clinical outcomes such as Harris hip score. The exclusion criteria were: (i) patients with neuropathic diseases; and (ii) patients who underwent THA due to neoplastic disease. Five (15.6%) patients were lost to follow up before the 7‐year follow‐up and, thus, were excluded; none of these patients died due to disease associated with the THA or had undergone removal of their cups as of our last evaluation. The mean age and body mass index of the patients were 59.37 (range: 38.00–69.00) years and 24.51 (range: 16.50–34.10) kg/m2, respectively. Thirteen (48.1%) of the patients were female.ResultsThe average duration of follow‐up was 93.48 (range: 89.00–99.00) months. The median Harris hip score improved from 42.00 (interquartile range: 37.00–49.00) to 97.00 (interquartile range: 92.00–97.00) at the latest follow up (P < 0.001). A total of 18 (66.7%) patients rated their satisfaction level as very satisfied, 6 (22.2%) as satisfied, 2 (7.4%) as neutral and 1 (3.7%) as dissatisfied. No intraoperative or postoperative complications were identified. At the latest follow up, all cups were considered to have achieved osteointegration fixation, with three or more of the five signs evident in the most recent X‐ray. However, three cups revealed radiolucent lines with a width of less than 1 mm. The median vertical and horizontal distances between the latest postoperative center of rotation relative to the anatomic center of rotation were 2.50 (interquartile range: −3.10, 6.94) mm superiorly and 3.26 (interquartile range: −8.12, 2.38) mm medially, respectively, at the most recent postoperative follow up. Kaplan–Meier survivorship analysis of cups, with the endpoint defined as postoperative radiolucent lines of less than 1 mm in width in at least two zones, reveals that the 8.25‐year survival was 96.3% (95% confidence interval: 76.49%–99.47%).ConclusionThe mid‐term follow‐up of patients who underwent primary THA using EBM‐produced porous coated titanium cups demonstrated favorable patient satisfaction, good clinical function, excellent survivorship, and adequate biological fixation.

Onlay fibula autografting technique and its comparison with cortical allograft for the reconstruction of periprosthetic bone defects around the femur.

Bone defect around the femur related to revisions or periprosthetic fractures (PFF) is an issue. We present a bone defect reconstruction technique in femoral revisions and/or PFF using fibula autograft and compared our radiological and clinical results to that of allograft. A total of 53 patients who underwent revision hip arthroplasty and/or PFF fixation with the use of cortical fibula autograft (FG group) or cortical allograft (CG group) were evaluated. After exclusions, 20 patients who had minimum two years of follow-up were investigated for each group, for their radiological and clinical outcomes. In FG and CG groups, the median ages were 69.5(44-90) and 62(38-88) years, follow-ups were 59(28-72) and 120(48-216) months, defect lengths were seven (1-10) and ten (1-17) cm, and grafts lengths were 16.5(10-30) and 20(12-37) cm, respectively. The rate of graft incorporation was 90% in each group and median time to incorporations were seven (4-12) and 12(6-24) months (p< 0.001), and graft resorption (moderate and severe) rates were 10% and 25% (p= 0.41), respectively. Median Harris Hip (77.6 vs 78.0), WOMAC (23.2 vs 22), SF-12 physical (50.0 vs 46.1), and SF-12 mental (53.8 vs 52.5) scores were similar between the groups, respectively. Kaplan-Meier survivorship analyses revealed an estimated mean survival of 100% at sixyears in FG group and 90% at 14years in CG group. In the reconstruction of periprosthetic bone defects after femoral revision or PPF, onlay cortical fibula autografts provide comparable clinical and radiological outcomes to allografts. Its incorporation is faster, it is cost-effective and easy to obtain without apparent morbidity.

Promising results of revision total hip arthroplasty using a hexagonal, modular, tapered stem in cases of aseptic loosening.

BackgroundModular stems are widely used in revision total hip arthroplasty (THA) with aseptic loosening being a common reason for revision. Despite the good results reported on the use of modular stem designs, there are only few studies focusing on aseptic revisions and few studies on a hexagonal stem design. The goal of this study is to determine stem survival, clinical and functional outcome along with possible risk factors for implant failure in aseptic revision THA.MethodsWe retrospectively identified 53 patients with aseptic THA revision using a modular hexagonal stem with a minimum follow-up of two years. Femoral bone loss, radiographic and clinical outcomes as well as function measured using the Harris Hip Score (HHS) was assessed. Patients’ previous medical history was analyzed for comorbidities and the body mass index. Stem survival was calculated using the Kaplan-Meier method. Possible risk factors for implant failure were analyzed using the log-rank test. The median age at revision was 69 (IQR 62–73) with a median follow up of 74 months.ResultsImplant survival rates amounted to 90.4% at 3 and 5 years. The median HHS improved by 47 points (34 (IQR 22–47) vs 81 (IQR 59–90) p<0.001). There was a reduced implant survival after 5 years when the revision stem was used following a previous cemented stem (83.4% vs 100%, p = 0.04).ConclusionA modular, hexagonal stem can be successfully used in aseptic revision THA with remarkable functional results and excellent survivorship. Revision of a cemented stem using this implant might result in reduced survival which must be considered when planning treatment.