Mecklenburg Bay Research Articles

A submerged Stone Age hunting architecture from the Western Baltic Sea

The Baltic Sea basins, some of which only submerged in the mid-Holocene, preserve Stone Age structures that did not survive on land. Yet, the discovery of these features is challenging and requires cross-disciplinary approaches between archeology and marine geosciences. Here, we combine shipborne and autonomousunderwater vehicle hydroacoustic data with up to a centimeter range resolution, sedimentological samples, and optical images to explore a Stone Age megastructure located in 21 m water depth in the Bay of Mecklenburg, Germany. The structure is made of 1,673 individual stones which are usually less than 1 m in height, placed side by side over a distance of 971 m in a way that argues against a natural origin by glacial transport or ice push ridges. Running adjacent to the sunken shoreline of a paleolake (or bog), whose youngest phase was dated to 9,143 ±36 ka B.P., the stonewall was likely used for hunting the Eurasian reindeer (Rangifer tarandus) during the Younger Dryas or early Pre-Boreal. It was built by hunter-gatherer groups that roamed the region after the retreat of the Weichselian Ice Sheet. Comparable Stone Age megastructures have become known worldwide in recent times but are almost unknown in Europe. The site represents one of the oldest documented man-made hunting structures on Earth, and ranges among the largest known Stone Age structure in Europe. It will become important for understanding subsistence strategies, mobility patterns, and inspire discussions concerning the territorial development in the Western Baltic Sea region.

Evidence of hybridization between genetically distinct Baltic cod stocks during peak population abundance(s).

Range expansions can lead to increased contact of divergent populations, thus increasing the potential of hybridization events. Whether viable hybrids are produced will most likely depend on the level of genomic divergence and associated genomic incompatibilities between the different entities as well as environmental conditions. By taking advantage of historical Baltic cod (Gadus morhua) otolith samples combined with genotyping and whole genome sequencing, we here investigate the genetic impact of the increased spawning stock biomass of the eastern Baltic cod stock in the mid 1980s. The eastern Baltic cod is genetically highly differentiated from the adjacent western Baltic cod and locally adapted to the brackish environmental conditions in the deeper Eastern basins of the Baltic Sea unsuitable for its marine counterparts. Our genotyping results show an increased proportion of eastern Baltic cod in western Baltic areas (Mecklenburg Bay and Arkona Basin)-indicative of a range expansion westwards-during the peak population abundance in the 1980s. Additionally, we detect high frequencies of potential hybrids (including F1, F2 and backcrosses), verified by whole genome sequencing data for a subset of individuals. Analysis of mitochondrial genomes further indicates directional gene flow from eastern Baltic cod males to western Baltic cod females. Our findings unravel that increased overlap in distribution can promote hybridization between highly divergent populations and that the hybrids can be viable and survive under specific and favourable environmental conditions. However, the observed hybridization had seemingly no long-lasting impact on the continuous separation and genetic differentiation between the unique Baltic cod stocks.

New insights into tunnel valley locations and Cenozoic exhumation in the southwestern Baltic Sea based on Machine Learning aided seismic refraction tomography

The Cretaceous and Cenozoic evolution of the North German Basin is shaped by complex processes involving basin inversion, uplift and erosion, extension and several periods of Quaternary glaciations. Based on a densely spaced long-offset 2D seismic profile network covering the Bays of Kiel and Mecklenburg, we employ a Machine Learning algorithm to pick refracted first-arrival travel-times. These travel-times are used in a travel-time tomography to derive velocity models for the approximately upper 800 m depth of the subsurface. Investigating velocity-depth relations within the Upper Cretaceous strata and analyzing lateral velocity anomalies within shallow depths provide new insights into the magnitude of the Cenozoic basin exhumation and the locations of glacial tunnel valleys. Our findings suggest that previously observed bent-up structures in seismic images are caused by heterogeneous velocities in the overburden and do not represent actual reflectors. We provide strong indications that these misinterpretations of imaging artifacts are related to tunnel valleys even though these valleys might not always be resolvable in seismic reflection or sediment sub-bottom images. Comparing Upper Cretaceous velocity-depth trends to reference trends reveals significantly higher velocities in our study area. We interpret these differences as overcompaction and estimate the apparent Cenozoic exhumation in the Bay of Mecklenburg to be about 475 m. Within the Bay of Kiel, we observe an increase of the apparent exhumation from about 385 m (south) to about 480 m (north). Our study demonstrates the importance of near surface velocity analysis for the investigation of geological processes in shallow marine settings.

Impact of Late Cretaceous inversion and Cenozoic extension on salt structure growth in the Baltic sector of the North German Basin

AbstractThe Late Cretaceous to Cenozoic is known for its multiple inversion events, which affected Central Europe's intracontinental sedimentary basins. Based on a 2D seismic profile network imaging the basin fill without gaps from the base Zechstein to the seafloor, we investigate the nature and impact of these inversion events on Zechstein salt structures in the Baltic sector of the North German Basin. These insights improve the understanding of salt structure evolution in the region and are of interest for any type of subsurface usage. We link stratigraphic interpretation to previous studies and nearby wells and present key seismic depth sections and thickness maps with a new stratigraphic subdivision for the Upper Cretaceous and Cenozoic covering the eastern Glückstadt Graben and the Bays of Kiel and Mecklenburg. Time‐depth conversion is based on velocity information derived from refraction travel‐time tomography. Our results show that minor salt movement in the eastern Glückstadt Graben and in the Bay of Mecklenburg started contemporaneous with Late Cretaceous inversion in the Coniacian‐Santonian. Minor salt movement continued until the end of the Late Cretaceous. Overlying upper Paleocene and lower Eocene deposits show constant thickness without indications for salt movement suggesting a phase of tectonic quiescence from the late Paleocene to middle Eocene. In the late Eocene to Oligocene, major salt movement recommenced in the eastern Glückstadt Graben. In the Bays of Kiel and Mecklenburg, late Neogene uplift removed much of the Eocene‐Miocene succession. Preserved deposits indicate major post‐middle Eocene salt movement, which likely occurred coeval with the revived activity in the Glückstadt Graben. Cenozoic salt structure growth critically exceeded salt flow during Late Cretaceous inversion. Cenozoic salt movement could have been triggered by Alpine/Pyrenean‐controlled thin‐skinned compression, but is more likely controlled by thin‐skinned extension, possibly related to the beginning development of the European Cenozoic Rift System.

The foraminiferal record in the Holocene evolution of the Mecklenburg Bay (south-western Baltic Sea)

Abstract Foraminiferal assemblages were analyzed in a 620-cm long core retrieved from the central part of the Mecklenburg Bay (MB, south-western Baltic Sea) to aid in the reconstruction of environmental changes occurring in the area during the Holocene and to complement a set of previously investigated palaeoenvironmental proxies. A total of five foraminifera-based stratigraphic units were identified, including an initial 80-cm thick layer devoid of foraminifera. The next two units featured an increasing abundance of the foraminiferal assemblage dominated by the calcareous Ammonia group species. Nearly all the calcareous foraminifera found in the core were decalcified. Following the maximum abundance within the 470–410 cm layer, the foraminiferal abundance declined sharply and the assemblage’s dominance structure changed to domination of the agglutinated foraminiferal species, Eggerelloides scaber, which continued up to the top of the core and marked a pronounced shift in environmental conditions (shallower depth, lower salinity, more dynamic sedimentation conditions). The foraminifera-based stratigraphy of the core proved to be complementary to that emerging from previous analyses of diatoms and sediment geochemistry.

When were the straits between the Baltic Sea and the Kattegat inundated by the sea during the Holocene?

The timing of the flooding of the Danish/German/Swedish straits and the first marine influence in the Baltic Basin after the Ancylus Lake stage has been much debated. Here we present 47 new radiocarbon ages from sediment cores retrieved from Danish waters, ages that record the marine transgression of the area. Most of the ages are based on shells of marine molluscs, hence the ages are uncertain because we do not know the precise reservoir age in the past. We use a reservoir age of 400 years, which is based on dating of museum specimens collected live before testing of nuclear bombs. It appears from the ages that the Great Belt (Storebælt) was inundated before The Sound (Øresund). The oldest ages on marine shells from the northern part of the Great Belt region are about 8.9 cal. ka BP. From the central part of the Great Belt, the oldest ages are about 8.2 cal. ka BP, in Mecklenburg Bay 8.1 cal. ka BP and in the Arkona Basin 7.1 cal. ka BP. Sediments deposited prior to the occurrence of marine molluscs contain brackish‐water ostracods (Cyprideis torosa and Cytheromorpha fuscata); the sediments are usually laminated and non‐bioturbated mud. The brackish‐water phase may have lasted 500–1000 years. The youngest lake deposits without signs of marine influence are dated to c. 8.8 cal. ka BP (central Great Belt), 8.7 cal. ka BP (Little Belt) and 8.5 cal. ka BP (Arkona Basin). We see no evidence for marine influence at c. 10 cal. ka BP as recorded by some studies from the Baltic Basin.

A comprehensive model of seismic velocities for the Bay of Mecklenburg (Baltic Sea) at the North German Basin margin: implications for basin development

The geometry of sedimentary basins is normally described by the interpretation of seismic reflectors. In addition to that, rock properties of the sedimentary successions between these reflectors give further insight into the subsurface geology. Here, we present a model for the Bay of Mecklenburg, situated at the northeastern margin of the North German Basin. The model consists of eight layers; it covers seismic velocities of sediments from the Neogene down to the base of the Permian Zechstein. We use eight seismic profiles for model building and apply seismic migration velocity analysis in combination with pre-stack depth migration. The results are interval velocities down to a depth of 5000 m. A further aim of the study is to investigate the sensitivity of these indirectly deduced velocities in comparison to direct measurements within drill holes. The velocities from this study are in good agreement with earlier results from vertical seismic profiling at a nearby well. Cenozoic and Mesozoic strata within the Bay of Mecklenburg show clear depth-dependent velocity trends. A comparison of these trends with predicted compaction trends shows that burial anomalies within Lower Triassic units are significantly higher than in Upper Cretaceous units. This finding could be explained by a greater amount of erosion during Upper Jurassic/Lower Cretaceous times than during Cenozoic times. The Zechstein layer shows a decreasing interval velocity with increasing thickness. Our study demonstrates that seismic velocities deduced from surface-based measurements are of high value in areas with sparse drilling coverage.

Assuring Integrity of CO2 Storage Sites Through Ground Surface Monitoring (SENSE)

Monitoring of geological CO2 storage is crucial for large-scale injection to gain public acceptance. Monitoring plans for large-scale operations need to include both the injection and post-injection phases to assure CO2 is safely stored permanently. The SENSE project aims to develop reliable, continuous, and cost-efficient monitoring based on ground movement detection combined with geomechanical modeling and inversion, utilizing new technology developments, data processing optimization, and interpretation algorithms. The proposed research activities include: • demonstration of continuous monitoring of surface deformation and subsurface pressure distribution using satellite data, water pressure sensors and fiber optics; • quantitative characterization of critical geomechanical and hydraulic parameters and automatization routine for data processing and interpretation; • optimization of sampling arrays in order to offer storage site operators a cost-effective monitoring option as part of an effective site assurance program. The SENSE project brings together experts from 14 international institutions of nine different countries to solve challenges in CO2 storage site monitoring and to provide solutions for safe and successful injection and post-closure phases of site operation. The project is organized in five Work Packages (WPs); WP1: Quantification of ground movement, WP2: Geomechanical modeling and rock strain assessment, WP3: History matching inversion and coupled flow-mechanics, WP4: Integration of results for cost-effective monitoring and WP5: Project management. The ultimate goal of SENSE is to offer storage site operators a cost-effective monitoring option that can form part of an effective site assurance/monitoring program and feed into workflows for an early alert system to detect unexpected changes in the subsurface. The SENSE project has four demonstration sites for monitoring technologies and developing concepts and procedures. These sites are both onshore and offshore. The onshore sites include In Salah (Algeria) and Hotfield Moors (UK). For these sites, the project will use satellite data to explore the response of the surface to pressure changes in the subsurface. Algorithms for automatic satellite data processing to facilitate quick access to ground elevation data for site operators are under development at the British Geological Survey (BGS) and Norwegian Geotechnical Institute (NGI). The offshore sites include Bay of Mecklenburg (Germany) and the Gulf of Mexico (USA). In addition, the SENSE partners have requested access to data from the Troll Gas Field, the North Sea, to study its subsidence due to production-related pressure reduction. The Troll Gas Field is located next to the storage site considered for the Norwegian Long Ship project, and its data will provide a good understanding of the geomechanics of the area. In this paper, we present the work on the In Salah and the Bay of Mecklenburg sites. New InSAR data from the In Salah are used to evaluate the ground movement during the post-injection period and thus to assess the behaviour of the storage site after completion of the injection phase. Bay of Mecklenburg is an offshore site for field experiment to inject a gas underground, build-up pressure, uplift the seafloor and measure the resulted uplift. The first field campaign at the Bay of Mecklenburg was completed in late 2019. It provided both gravity cores from the seabed and geophysical data acquisition for characterizing the shallow subsurface layers. The gravity cores were characterized for physical and mechanical properties. The material properties were used for simulating injection and response of the seafloor to induced pressure. Geomechanical 2D and 3D simulations show that the reservoir may sustain very low overpressure before it fails. Hence, this magnitude of overpressure may create a seafloor uplift of about a few millimeters to a couple of centimeters. The monitoring techniques are therefore being designed to capture uplift in this order of magnitude during the injection operation.

Structural Evolution at the Northeast North German Basin Margin: From Initial Triassic Salt Movement to Late Cretaceous‐Cenozoic Remobilization

AbstractIn this study, we investigate the regional tectonic impact on salt movement at the northeastern margin of the intracontinental North German Basin. We discuss the evolution of salt pillows in the Bay of Mecklenburg in the light of thick‐ and thin‐skinned tectonics, including gravity gliding, and differential loading using seismic imaging. Stratigraphic and structural interpretation of a 170 km long, multichannel seismic line, extending from the Bay of Mecklenburg to northeast of Rügen Island, incorporates well information of nearby onshore wells. This new high‐resolution seismic line completely images the stratigraphic and tectonic pattern of the subsurface, from the base of the Zechstein to the seafloor. Our analysis reveals that subsidence during Late Triassic to Early Cretaceous at the northeastern basin margin was associated with transtensional dextral strike slip movement within the Trans‐European Suture Zone. We reinterpret the Werre and Prerow Fault Zones west of Rügen Island as an inverted, thin‐skinned normal fault system associated with the formation of the Western Pomeranian Fault System. Salt movement in the Bay of Mecklenburg was initiated in the Late Triassic and lasted until the Early Jurassic. A second phase of salt pillow growth occurred during the Coniacian until Cenozoic and correlates with compression‐related regional basin inversion due to the onset of the Africa‐Iberia‐Europe convergence. Thin‐skinned extensional initialization of salt pillow growth and compressional salt remobilization explains salt pillow evolution in the Bay of Mecklenburg. Additionally, we discuss an impact of gravity gliding on salt pillow evolution induced by basin margin tilt.

Environmental evolution of western Baltic Sea in the Holocene in the light of multidisciplinary investigations of sediments cores from Arkona Basin

A multidisciplinary investigation performed on gravity cores, supplemented by a new radiocarbon dating of macrofossils, outlined the environmental evolution of Arkona Basin in the Holocene. Studies comprising the analysis of diatoms, geochemistry, grain size, and radiocarbon dating clarified the knowledge about the age and environmental changes during freshwater and marine transgressions and regressions. The acoustic profiling method allowed proper interpretation of the analysis results from sediment cores and created a proper lithostratigraphic model of the investigated basin. Baltic Ice Lake and Yoldia Sea sediment layers were identified acoustically and cores penetrated the final regression surface of the Baltic Ice Lake. The analyses of cores concentrated on Ancylus Lake and Littorina Sea sediments. Two phases of the Ancylus Lake stage were identified. The peaks of loss on ignition in the cores, observed as a strong acoustic reflector, were identified as a marker of Ancylus Lake regression between the first, high-water level phase and the second, shallow-water phase. The age of onset of Littorina transgression was estimated at around 7000–7200 cal BP and was younger than some previous estimations. The retrieved age confirmed the suggestion that the marine environment appeared first in Mecklenburg Bay and then after a few hundred years in Arkona Basin as an intensive transgression. The appearance of Littorina Sea revealed a fast shift of the environment from lacustrine to marine. The first phase of the Littorina stage was recognised as a rapidly increasing water level and high-energy environment; the second showed rapidly increasing salinity in the calmer conditions of sedimentation.

Spring blooms in the Baltic Sea have weakened but lengthened from 2000 to 2014

Abstract. Phytoplankton spring bloom phenology was derived from a 15-year time series (2000–2014) of ship-of-opportunity chlorophyll a fluorescence observations collected in the Baltic Sea through the Alg@line network. Decadal trends were analysed against inter-annual variability in bloom timing and intensity, and environmental drivers (nutrient concentration, temperature, radiation level, wind speed).Spring blooms developed from the south to the north, with the first blooms peaking mid-March in the Bay of Mecklenburg and the latest bloom peaks occurring mid-April in the Gulf of Finland. Bloom duration was similar between sea areas (43 ± 2 day), except for shorter bloom duration in the Bay of Mecklenburg (36 ± 11 day). Variability in bloom timing increased towards the south. Bloom peak chlorophyll a concentrations were highest (and most variable) in the Gulf of Finland (20.2 ± 5.7 mg m−3) and the Bay of Mecklenburg (12.3 ± 5.2 mg m−3).Bloom peak chlorophyll a concentration showed a negative trend of −0.31 ± 0.10 mg m−3 yr−1. Trend-agnostic distribution-based (Weibull-type) bloom metrics showed a positive trend in bloom duration of 1.04 ± 0.20 day yr−1, which was not found with any of the threshold-based metrics. The Weibull bloom metric results were considered representative in the presence of bloom intensity trends.Bloom intensity was mainly determined by winter nutrient concentration, while bloom timing and duration co-varied with meteorological conditions. Longer blooms corresponded to higher water temperature, more intense solar radiation, and lower wind speed. It is concluded that nutrient reduction efforts led to decreasing bloom intensity, while changes in Baltic Sea environmental conditions associated with global change corresponded to a lengthening spring bloom period.

Baltic Sea datums and their unification as a basis for coastal and seabed studies

AbstractThis paper presents examples of application of a common reference datum, such as NAP, within the elevation EVRS reference system for the Baltic Sea. A common reference datum allowed for setting the geographical pattern of occurrence of extreme sea levels in the Baltic Sea. The eastern Baltic coasts exposed to western air masses are vulnerable to extreme hydrological events (the Gulf of Finland, the Gulf of Riga and the Gulf of Bothnia). On the contrary, the Swedish coasts of the central and northern Baltic are the least threatened by extreme sea levels. The south-western coasts of the Baltic Sea (the Bay of Mecklenburg and the Bay of Kiel) cover the basins with the most frequent and the most severe storm falls and extremely low sea levels. Demonstration of the Baltic surface deformation magnitude during a storm event is another example of NAP application. The instantaneous height difference between the north-eastern and southwestern coasts was 356 cm, which resulted from the negative impact of pressure (water cushion) induced by a dynamic and deep low-pressure system moving through the Baltic Sea. The common reference datum allowed for visualization of the so-called “theoretical water” distribution which has a wide application in the hydraulic engineering within the coastal zone. In addition, the study provides examples of differences that may be observed during storm events between the real sea-level data and the hydrodynamic model forecast. This is of great practical significance in terms of forecasting storm surges in the Baltic Sea.

Geo-acoustic modelling of late and postglacial sedimentary units in the Baltic Sea and their acoustic visibility

Acoustic profiling methods are commonly used in the geosciences to obtain knowledge about the sedimentary structures of marine deposits. However, their interpretation and the correlation of acoustic reflectors with sedimentological boundaries remain difficult. The gradient in acoustic impedance determines the intensity of acoustic reflectors, which are not necessarily sedimentary boundaries. Suitable geo-acoustic models that cover a wide range of sediment types have not yet been developed for the Baltic Sea. Based on comprehensive investigations of sediment cores from Mecklenburg Bay and the Arkona Basin, we developed geo-acoustic models that enable the transfer of laboratory p-wave velocity measurements to in situ conditions while considering changes in pressure, salinity, temperature and the frequency dependence of the p-wave velocity (i.e. acoustic dispersion). This modelling allows the calculation of the wet bulk density and in situ p-wave velocity (from which the acoustic impedance is calculated) from core logging and selected sedimentological data, such as the water content, loss on ignition, and grain size. Precise plotting of core data into the acoustic profiles is now possible and represents a crucial step towards the interpretation of these profiles. Modelled p-wave velocities are used to convert two-way-travel-time to depth. The average sedimentological parameters for the different development phases of the Baltic Sea are calculated using geo-statistical methods and may allow for rough p-wave estimations if core logging data are not available.

C25 highly branched isoprenoid alkenes in the Baltic Sea produced by the marine planktonic diatom Pseudosolenia calcar-avis

C25 and C30 highly branched isoprenoid (HBI) alkenes are lipid biomarkers produced exclusively by certain diatoms and found in sediments worldwide. Here, for the first time, it is shown that the marine planktonic diatom Pseudosolenia calcar-avis (Schultze) (Sundström, B.G., 1986. The Marine Diatom Genus Rhizosolenia (A New Approach to the Taxonomy) (Ph.D. thesis). Lund University, Lund), isolated from near surface waters in Mecklenburg Bay (southwestern Baltic Sea) biosynthesizes one C25:2 and two C25:3 HBI alkenes previously reported in some benthic diatoms. The presence of the same C25 HBI alkenes in surface sediments from Mecklenburg Bay and the Arkona Sea, as well as their co-occurrence with remnant frustules of P. calcar-avis in a sediment core from the northern Baltic Sea, indicates that these lipids are very likely specific biomarkers for this diatom in this region at least. Further, since P. calcar-avis has a tolerance for low salinities (8–10), we also suggest that the occurrence of some of the HBIs produced by this diatom might represent a useful proxy for measuring past changes in inflowing water from the North Sea. The same C25 HBIs, previously found in sediments from the Caspian Sea and the Black Sea, may also be produced by P. calcar-avis in such settings.

Plesiosaurian fossils from Baltic glacial erratics: evidence of Early Jurassic marine amniotes from the southwestern margin of Fennoscandia

Abstract Early Jurassic plesiosaurian fossils are rare in the Scandinavian region, with a few isolated bones and teeth known from Bornholm, and anecdotal finds from East Greenland. The only other identifiable specimens derive from Toarcian-aged (based on ammonites) erratics deposited during Late Pleistocene glacial advances near the town of Ahrensburg, NE of Hamburg in northern Germany. The geographical source of these transported clasts is debated, but reconstructed ice-flow directions and lithofacies comparisons implicate either the offshore Baltic Sea between the Island of Bornholm and Mecklenburg–Vorpommern (Germany) or, less probably, south of the Danish Archipelago (Mecklenburg Bay). These regions collectively bordered the Fennoscandian landmass and adjacent Ringkøbing-Fyn Island in the late Early Jurassic, and were dominated by near-shore marine deltaic to basinal settings. The Ahrensburg plesiosaurian remains include postcranial elements reminiscent of both the microcleidid Seeleyosaurus and the rhomaelosaurid Meyerasaurus . These occur alongside other classic ‘Germanic province’ marine amniotes, such as the teleosaurid crocodyliform Steneosaurus and ichthyosaurian Stenopterygius cf. quadriscissus : thus, advocating faunal continuity between Scandinavia and southern Germany during the Toarcian, and a less pronounced marine reptile faunal provinciality than previously assumed.

Age and evolution of the Littorina Sea in the light of geochemical analysis and radiocarbon dating sediment of cores from the Arkona Basin and Mecklenburg Bay (SW Baltic Sea)

Two sediment cores from the Mecklenburg Bay and Arkona Basin were analysed in terms of their geochemical composition and stratigraphy. The main stages of the Baltic Sea evolution – Baltic Ice Lake, Ancylus Lake, and Littorina Sea – were identified in both analysed cores. The most pronounced period was the transition between the Ancylus Lake and the Littorina Sea. The character of the initial stage of the Littorina Sea was clearly defined in the Mecklenburg Bay sediments and is marked by a stepwise increase in loss on ignition and contents of biogenic silica, calcium, magnesium, iron, and strontium. The record of the onset of the Littorina Sea in the Arkona Basin sediments is marked by an abrupt change of the geochemical parameters. The age of the initial Littorina Sea in the Mecklenburg Bay was estimated at about 8200 cal years BP and was probably older than the transgression within the Arkona Basin.

Evolution of Arkona Basin environment in the Holocene in the light of diatom research

This article presents the results of diatom studies from three cores taken from the Arkona Basin. The main stages of the Baltic Sea evolution in the Holocene - Ancylus Lake, Mastogloia Sea, Littorina Sea, and Post-Littorina Sea - were identified in diatom assemblages. The transition stage between Ancylus Lake and Littorina Sea, called Mastogloia Sea, was not such a long period as in the Mecklenburg Bay but was essential in the evolution of the Baltic Sea. The most pronounced feature of this period was an increase in the number of halophilous species, which reflected the existence of the littoral environment at the onset of this stage. The appearance and development of halophilous species was stimulated by stepwise inflows of saline waters. The composition of diatom assemblages reflected natural eutrophication of the Baltic Sea during the Littorina Sea stage.

The evolution of the Mecklenburg Bay environment in the Holocene in the light of multidisciplinary investigations of the sediment cores

Multi-proxy studies of the sediment cores and acoustic profiles from Mecklenburg Bay display a more detailed picture of the evolution of the environment in the Holocene. Studies of diatoms, geochemistry, grain size and radiocarbon dating clearly reveal the age and character of freshwater and marine transgressions and regressions. After the final regression of the Baltic Ice Lake, a local lake and swamp environment was recorded by peat gyttja sediments. This environment existed until the Ancylus Lake transgression dated ca 10,500 cal BP. During the Ancylus Lake period, the area remained a shallow-water lake, transitional isolated from the main Baltic Basin. The first slightly brackish marine inflows confirmed by the appearance of planktonic, mesohalobous and halophilous diatoms were identified at the beginning of the Initial Littorina Sea stage and dated ca 8800 cal BP. The boundary between the Ancylus Lake and the Initial Littorina Sea is marked by increasing contents of biogenic silica and iron. The Initial Littorina Sea stage was characterized by increasing mesohalobous and polyhalobous diatom forms and decreasing oligohalobous species. The Initial Littorina Sea environment was recorded as a slightly brackish reservoir sporadically affected by weak marine inflows. The Littorina transgression appeared in the Mecklenburg Bay at ca 7500–7700 cal BP and is reflected by the domination of polyhalobous diatoms, increasing mean grain size, biogenic silica, and calcium and magnesium contents. The Initial Littorina Sea was a 1500-year-long period in Mecklenburg Bay, existing until the Littorina transgression. The main Littorina transgression first appeared in Mecklenburg Bay around 7700 cal BP and after a few hundred years at around 7200 cal BP in the Arkona Basin.

Implementation of European marine policy: New water quality targets for German Baltic waters

A full re-calculation of Water Framework Directive reference and target concentrations for German coastal waters and the western Baltic Sea is presented, which includes a harmonization with HELCOM Baltic Sea Action Plan (BSAP) targets. Further, maximum allowable nutrient inputs (MAI) and target concentrations in rivers for the German Baltic catchments are suggested. For this purpose a spatially coupled, large scale and integrative modeling approach is used, which links the river basin flux model MONERIS to ERGOM-MOM, a three-dimensional ecosystem model of the Baltic Sea. The years around 1880 are considered as reference conditions reflecting a high ecological status and are reconstructed and simulated with the model system. Alternative approaches are briefly described, as well. For every WFD water body and the open sea, target concentrations for nitrogen and phosphorus compounds as well as chlorophyll a are provided by adding 50% to the reference concentrations. In general, the targets are less strict for coastal waters and slightly stricter for the sea (e.g. 1.2mg/m³ chl.a summer average for the Bay of Mecklenburg), compared to current values. By taking into account the specifics of every water body, this approach overcomes the inconsistencies of earlier approaches. Our targets are well in agreement with the BSAP targets, but provide spatially refined and extended results. The full data are presented in Appendix A1 and A2.To reach the targets, German nitrogen inputs have to be reduced by 34%. Likely average maximum allowable concentrations in German Baltic rivers are between 2.6 and 3.1mgN/l. However, the concrete value depends on the scenario and uncertainties with respect to atmospheric deposition. To our results, MAI according to the BSAP may be sufficient for the open sea, but are not sufficient to reach a good WFD status in German coastal waters.

Late Holocene Baltic Sea outflow changes reconstructed using C37:4 content from marine cores

The Baltic Sea is an intra‐continental brackish water body. Low saline surface water, the so‐called Baltic outflow current, exits the Baltic Sea through the Kattegat into the Skagerrak. Ingressions of saline oxygen‐rich bottom water enter the Baltic Sea basins via the narrow and shallow Kattegat and are of great importance for the ecological and ventilation state of the Baltic Sea. Over recent decades, progress has been made in studying Holocene changes in saline water inflow. However, reconstructions of past variations in Baltic Sea outflow changes are sparse and hampered because of the lack of suitable proxies. Here, we used the relative proportion of tetra‐unsaturated C37 ketones (C37:4 %) in long‐chain alkenones produced by coccolithophorids as a proxy for outflowing Baltic Sea water in the Skagerrak. To evaluate the applicability of the proxy, we compared the biomarker results with grain‐size records from the Kattegat and Mecklenburg Bay in addition to previously published salinity reconstructions from the Kattegat over the last 5000 years. All Skagerrak records showed an increase in C37:4 % that is accompanied by enhanced bottom water currents in the Kattegat and western Baltic Sea over the past 3500 cal. a BP, indicating an increase in Baltic Sea outflow. This probably reflects higher precipitation in the Baltic Sea catchment area owing to a re‐organization of North Atlantic atmospheric circulation with an increased influence of wintertime Westerlies over the Baltic catchment from the mid‐ to the late Holocene.