Mechanical Energy Harvesting Research Articles

Sustainable materials systems for triboelectric nanogenerator

AbstractBenefiting from the high sensitivity and electromechanical conversion efficiency, triboelectric nanogenerators (TENGs) are widely used in various fields of self‐powered sensing and mechanical energy harvesting, which have great potential for application in future smart Internet of Things. The development of sustainable triboelectric materials with high‐performance has a vital impact on the construction of TENG devices that combine high‐output performance and environmental friendliness, which have a positive impact on the sustainable development of humanity. This review systematically and comprehensively summarizes the latest research work on TENG's sustainable materials. First, an overall overview is provided based on the composition of the materials, including amino acids, polysaccharides, and synthetic polymer, and the representative research works are further classified and summarized in detail. In addition, the latest research progress of TENG with sustainable materials in the fields of self‐powered sensing and mechanical energy harvesting applications is also summarized. Finally, the overviews are provided for the various challenges in the current development of TENG's sustainable material, and the related outlooks are offered on the corresponding development strategies and directions of this field in the future.

Graphene reinforced cement-based triboelectric nanogenerator for efficient energy harvesting in civil infrastructure

This paper investigated a graphene reinforced cement-based triboelectric nanogenerator (TENG) aimed at harvesting mechanical energies in infrastructure, such as pedestrians, vehicles, human-induced vibrations, and natural stimulus like wind and earthquakes. The triboelectric layers of the cement-based TENG consisted of a fully cured graphene modified cement-based plate and a polytetrafluoroethylene (PTFE) film, which were tested under a contact-separation mode. Microstructural analysis indicated that the graphene was well-dispersed in the cementitious matrix, and the graphene-cement composites achieved excellent compressive and flexural strengths of 53.0 and 3.5 MPa, respectively. The electrical characteristics of the graphene-cement composites, specifically their resistivity and impedance, showed that they did not reach the percolation threshold, making them ideal dielectric materials with a dielectric constant of 100 at 1 kHz. The performance of the cement-based triboelectric nanogenerator (TENG) varied depending on the amplitude and frequency of the contact-separation cycle. At a frequency of 10 Hz and under a force of 100 N, the short-circuit current and open-circuit voltage peaked at 3.62 µA and 279.4 V, respectively, achieving a maximum power density of 95 mW/m2 with a 100 MΩ resistor. In practical applications, this TENG charged a 10 μF capacitor to 3.1 V within one minute and to 57.2 V in one hour. Additionally, manual operation of the TENG enabled the lighting of 29 LEDs with one minute of hand pressure. By utilizing triboelectric effects, the results provide the feasibility of self-powering concrete structures and pavements for future smart cities.

Boosting triboelectric performance of PDMS-based nanogenerators through dual-filler embedded triboelectric layers

Triboelectric nanogenerators (TENGs) provide an effective method for harvesting mechanical energy and converting it into electrical power. Polydimethylsiloxane (PDMS)-based TENGs are particularly advantageous due to their excellent mechanical properties, high flexibility, simple manufacturing process, and low cost. In this study, we suggest a PDMS-based TENG by integrating surface-modified carbon nanotubes (SMCs) prepared by pulsed laser ablation (PLA), along with high-permittivity BaTiO3 (BTO) nanoparticles. The combination of SMCs' superior electrical conductivity and BTO's high dielectric constant has synergistically enhanced the TENG's performance. Compared to pristine PDMS-based TENGs, the TENG incorporating 0.05 wt% SMCs and 7 wt% BTO demonstrated a remarkable 200 % increase in voltage (432.44 V) and a 324 % increase in current (39.23 μA). Also, plasma treatment further boosts the triboelectric performance, achieving a voltage of 468 V, a current of 43.04 μA, and a power density of 7.83 W/m².

Morphology Regulation and Oxygen Vacancy Construction Synergistically Boosting the Piezocatalytic Degradation and Pure Water Splitting of SrTiO3.

In recent years, the development of high-efficiency piezoelectric materials is an effective means to make full use of the mechanical energy widely existing in the environment. However, there are few reports on multi-strategies synergistically improving piezocatalytic activity, and the mechanism of synergistic enhancement of piezocatalytic activity also receives less attention. Herein, the SrTiO3 nanorods decorated with tunable surface oxygen vacancy concentrations are prepared. Oxygen vacancy-optimized SrTiO3 nanorods exhibit efficient and undifferentiated piezocatalytic degradation activities for both anionic and cationic dyes under ultrasonic vibration. More importantly, it can split water into H2 and H2O2 with high production rates of 540 and 332 µmol g-1 h-1 without adding any sacrificial agents and cocatalysts, respectively. Mechanism analyses demonstrate that the 1D structure is beneficial to mechanical energy harvesting, and the surface oxygen vacancy induces larger surface asymmetry and piezoelectric response, synergically enhancing the piezocatalytic activity of SrTiO3 nanorods. In addition, metal deposition experiments under different conditions show that SrTiO3 nanorods possess abundant reactive catalytic sites in the piezocatalytic reaction process. This work provides a further understanding of piezocatalysis in piezoelectric nanomaterials and is important for the development of efficient piezoelectric catalysts.

Experimental Study on Human Kinetic Energy Harvesting with Wearable Lifejackets to Assist Search and Rescue

This study explores the integration of a human kinetic energy-harvesting mechanism into lifejackets to address the energy needs of aid search and rescue operations in aquatic environments. Due to the limited data on the movement patterns of drowning individuals, a human motion model has been developed to identify optimal design parameters for energy harvesting. This model is developed from computer vision analysis of underwater footage and motion capture laboratory experiments and is used to quantify the potential for power generation. The field testing experiment is conducted underwater, replicating the environment used for footage collection and analysis for the modelling. During the field testing, the participant wears a lifejacket integrated with the energy-harvesting device. Field testing data are then collected to verify the model. The efficacy of this approach is demonstrated with observed power outputs ranging from 0 mW to 754 mW in simulations and experiments. Despite challenges such as the “dead zone” in a drowning person’s motion, the success of the experiments underscores the potential of the proposed energy-harvesting mechanism to efficiently harness the kinetic energy generated by a drowning person’s movements. This study contributes to the development of sustainable, energy-efficient solutions for search and rescue operations, particularly in remote and challenging aquatic environments.

PVDF/NiFe2O4 multiferroic composite membranes for dual mechanical and magnetic energy harvesting devices

A multiferroic composite membrane, combining PVDF piezoelectric polymer and nickel ferrite (NFO) nanofibers, was successfully fabricated and studied as an active material layer in multifunctional devices designed to harvest both mechanical and magnetic energy. Optimization of the manufacturing process ensured an even distribution of NFO fibers within the PVDF matrix, enhancing the crystallization of PVDF in the electroactive β phase. The resulting PVDF/NFO multiferroic films exhibited both piezoelectric and magnetic properties, along with a pronounced magnetoelectric (ME) effect. In a structure comprising Al/PVDF-NFO/PDMS/Al, the device operated as a piezoelectric generator (PEG) under a pressing force of 0.5 MPa, achieving a maximum output power density of 14.7 μW cm−12 with a peak-to-peak voltage of 12.2 V. When subjected to an AC magnetic field of 20 Oe at 50 Hz, the device functioned as a magneto-mechano-electrical (MME) generator, producing a sinusoidal waveform voltage of 486 mV. The cost-effective and easily integrable PVDF/NFO composite membrane presents promising opportunities for developing flexible, self-powered smart sensors for human health monitoring systems and implantable biomedical devices.

Separating, purifying and decoding elastic waves by mimicking a cochlea on a thin plate

A human cochlea is capable of continuously separating and amplifying sound of different frequencies to specific positions from 20 to 20,000 Hz, which makes it a high-resolution living sensor. The realization of cochlea-like structure for elastic waves in solids offers a highly desirable functionality on high throughput mechanical energy harvesting and sensing, but remains a challenging topic owing to narrow band and intricate configuration. Here we propose and demonstrate a generic framework of elastic cochlea on a thin plate, enabled by a pair of compact metafence layers. It is experimentally realized to harvest and separate flexural waves in quite a wide frequency range from 5.8 to 21.8 kHz, together with a continuous energy amplification exceeding one magnitude order. An enhanced mode, characterized by a near zero group velocity at a tailored cutoff width, is uncovered to illustrate the filtering and amplification physics. Moreover, complex information demultiplexing and undistorted decoding are further realized by harnessing the high-Q signal sensing and purification. The proposed prototype may stimulate substantial applications on information processing, non-destructive evaluation and other wave regulation scenarios.

Tribo-hygro-electric generator: Harnessing mechanical energy with liquid-infused porous cellulose for multiple sensing and DC power generation

This study introduces the Tribo-Hygro-Electric Generator (THEG), a novel device that harvests ambient mechanical and water-enabled energies for highly sensitive, self-powered multi-sensing. THEG employs a simple design using liquid-infused porous cellulose (LIPC), created by absorbing functional liquids such as water into porous cellulose, and metal contacts with distinct work functions (e.g., Al and Cu) to generate triboelectric charges through friction. It operates via a three-step process: generating triboelectric charges through sliding motion, establishing an internal electric field across Al/LIPC/Cu interfaces for charge separation, and directing charges to create unidirectional output electron transfer, producing direct current (DC) outputs. The principle behind THEG emphasizes the critical role of the single Schottky contact at the Al/LIPC interface in separating and directing charge transfer, as well as the conductive path formed by the hydrogen-bonded network of water molecules and cellulose’s functional groups. THEG can harvest DC power with a current density of up to 3.4 A/m² and 0.5 V, which can be increased to 2 V with four cells in series. THEG demonstrates impressive multiple-sensing capabilities, with robust linear relationships (correlation coefficients > 0.99) between output current density and stimuli such as pressure, velocity, water absorption, and ion concentration. Demonstrating practical utility, the generated energy powers devices like a commercial calculator. This technology advances mechanical energy harvesting and multiple sensing, reducing dependence on external power and enabling transformative IoT applications.

Complex nonlinear dynamics of a multidirectional energy harvester with hybrid transduction

Abstract Mechanical energy harvesting has increasing scientific and technological interests due to novel energetic challenges. A critical issue in classical cantilever-based mechanical energy harvesting systems is the lack of multidirectional energy conversion capabilities and, due to that, deviations from the excitation source can drastically reduce their performance. This limitation has led to the development of energy harvesters with attached pendula, serving as a direction coupling mechanism. Nevertheless, the pendulum structure itself can act as an energy absorber, drastically reducing the harvester performance in certain scenarios. In order to overcome this issue, a hybrid transduction multidirectional pendulum-based energy harvester is proposed integrating a piezoelectric element, to capture energy from the principal direction, and an electromagnetic transducer, to harness rotational energy from the pendulum. This paper presents an in-depth analysis of the hybrid multidirectional pendulum-based energy harvester using a nonlinear dynamics perspective to evaluate the energy harvesting performance. A reduced-order model is proposed to represent the essential characteristics of such systems. A parametric analysis using a nonlinear dynamics perspective is carried out to map the system dynamics and performance. The emergence of complex and rich dynamics is observed, including chaos and hyperchaos. Results reveal the most and least effective combinations of structural parameters in terms of energy conversion. Additionally, the dynamical responses and patterns associated with high performance are identified. These responses are often characterized by a blend of irregular complex behaviors, coupled with a mix of oscillatory and rotational patterns of motion, resulting in wider bandwidth systems.

Corrigendum to “A pendulum based frequency-up conversion mechanism for vibrational energy harvesting in low-speed rotary structures”

Corrigendum to “A pendulum based frequency-up conversion mechanism for vibrational energy harvesting in low-speed rotary structures”

Rod-type handheld hybrid nanogenerator for mechanical energy harvesting and self-powered speed sensing applications

Nanogenerators offer a promising solution for converting mechanical movements into electricity with significant implications for portable electronics. Herein, we propose a novel approach using magnesium (Mg)-doped zinc oxide (ZMO) nanoflakes (NFs) embedded in polydimethylsiloxane (PDMS) composite films, which serve as the negative tribo-layer in a triboelectric/piezoelectric hybrid nanogenerator (HNG) operating in contact-separation mode. The ZMO NFs, with an optimized Mg concentration for a high dielectric constant, are mixed into PDMS, and their concentration is further optimized to achieve the highest electrical output from the HNG. The optimized device generates a voltage, current, and power density of approximately 186 V, 5.23 μA, and 1.56 W/m2, respectively while also exhibiting high stability. The electricity generated by this HNG is successfully utilized to power commercial portable electronics. To further enhance its practicality, six similar HNGs were fabricated and integrated into a 3D printed structure, forming a rod-type handheld HNG (RTH-HNG). The energy-harvesting capability of the RTH-HNG is systematically investigated under applied external forces. Additionally, the speed-sensing ability of the RTH-HNG during hand-shaking motions is assessed, with the system demonstrating an accuracy of up to 94 % when compared to a commercially available infrared sensor. Moreover, the real-time vibrational energy harvesting capability of the RTH-HNG was demonstrated by attaching it to a bicycle. Therefore, the proposed RTH-HNG can function not only as a mechanical energy harvester for powering small portable electronics but also as a self-sufficient speed sensor for various real-time applications.

Tailoring of Self-Healable Polydimethylsiloxane Films for Mechanical Energy Harvesting.

Triboelectric nanogenerators (TENGs) have emerged as potential energy sources, as they are capable of harvesting energy from low-frequency mechanical actions such as biological movements, moving parts of machines, mild wind, rain droplets, and others. However, periodic mechanical motion can have a detrimental effect on the triboelectric materials that constitute a TENG device. This study introduces a self-healable triboelectric layer consisting of an Ecoflex-coated self-healable polydimethylsiloxane (SH-PDMS) polymer that can autonomously repair mechanical injury at room temperature and regain its functionality. Different compositions of bis(3-aminopropyl)-terminated PDMS and 1,3,5-triformylbenzene were used to synthesize SH-PDMS films to determine the optimum healing time. The SH-PDMS films contain reversible imine bonds that break when the material is damaged and are subsequently restored by an autonomous healing process. However, the inherent stickiness of the SH-PDMS surface itself renders the material unsuitable for application in TENGs despite its attractive self-healing capability. We show that spin-coating a thin layer (≈32 μm) of Ecoflex on top of the SH-PDMS eliminates the stickiness issue while retaining the functionality of a triboelectric material. TENGs based on Ecoflex/SH-PDMS and nylon 6 films show excellent output and fatigue performance. Even after incisions were introduced at several locations in the Ecoflex/SH-PDMS film, the TENG spontaneously attained its original output performance after a period of 24 h of healing. This study presents a viable approach to enhancing the longevity of TENGs to harvest energy from continuous mechanical actions, paving the way for durable, self-healable mechanical energy harvesters.

Impact of Ca2+ and Zr4+ substitution on mechanical energy harvesting response of lead-free BaTiO3 piezoceramics with thermally stable storage density and efficiency

The Ba1-xCaxZryTi1-yO3 (BCZT; x = 0.18, y = 0.08; x = 0.15, y = 0.10; x = 0.12, y = 0.12; x = 0.09, y = 0.14; both x and y are in mol. %) piezoceramics were prepared by solid-state reaction method and investigated their energy storage and harvesting responses. The composition x = 0.15, y = 0.10 ( i.e. BCZT-2) reveals the morphotropic phase boundary (MPB) near room temperature with enhanced piezoelectric properties such as piezoelectric charge coefficient (d33) ∼ 380 pC/N, piezoelectric strain coefficient (d33*) ∼ 583.71 pm/V, piezoelectric voltage coefficient (g33) ∼ 14.09 ×10−3Vm/N, figure of merits (d33×g33) ∼ 5.35 ×10−12m2/N and the electromechanical coupling coefficient (kp) ∼ 0.291. The harvested peak-to-peak open circuit AC voltage is 30 V and the calculated current is in the range of 0.02–0.14 mA with varied load resistance and the maximum obtained power density is 13.38 μW/mm3 for BCZT-2 ceramics. The DC output signal of BCZT-2 ceramics successfully lit up the 'FCLNT' panel consisting of 53 red LEDs. At room temperature, BCZT ceramics have a recoverable energy storage density (Wrec) and storage efficiency (η) in the range between 506.46 and 257.49 mJ/cm3 and 50.53 – 64.93 % respectively. The composition x = 0.12, y = 0.12 (i.e. BCZT-3) revealed the highest energy storage efficiency (η) ∼ 64.93 % at room temperature. Nonetheless, the temperature-dependent (till its Curie temperature) maximum obtained Wrec of all BCZT ceramics is found in the range between 238.41 and 446.49 mJ/cm3 with an η of 66.98–79.67 %. Thus, compositionally tuned BCZT ceramics exhibit considerable piezoelectric properties, including energy storage and harvesting capabilities.

A 3D printed serrated contact structure triboelectric nanogenerator for swimming training safety monitoring

The wearable electronic devices integrated with 3D printing have attracted much attention, but the continuous power supply demand and limited application scenarios have limited their development. Here, we propose a 3D printed serrated contact structure triboelectric nanogenerator (S-TENG) designed for mechanical energy harvesting and swimming training safety monitoring. Leveraging the advancements in 3D printing technology, we created a flexible, lightweight sensor integrated with polytetrafluoroethylene (PTFE) and polyethylene terephthalate (PET) films on a serrated substrate. This configuration enhances the contact surface area, leading to a significant improvement in energy harvesting efficiency compared to flat structures. Specifically, the serrated structure resulted in a 64 %, 63 %, and 47 % increase in open-circuit voltage (Voc), short-circuit current (Isc), and transferred charge (Qsc), respectively, owing to the contact area and unique surface functional structure. The S-TENG device exhibits excellent performance under various bending angles, with Voc, Isc, and Qsc reaching up to 98.04 V, 4.35 μA, and 38.51 nC at 90° bending. Additionally, the S-TENG maintains stable output in different humidity environments due to its fully encapsulated design, ensuring reliable operation in aquatic settings. The S-TENG can accurately measure elbow swing amplitude and frequency, providing valuable real-time data for athletes and coaches. The S-TENG's ability to detect irregular movements and potential drowning incidents underscores its promise in enhancing swimmer safety. This research demonstrates the S-TENG's utility in both energy harvesting and motion monitoring, paving the way for advanced wearable sports sensors in various athletic disciplines.

Hybrid piezo-triboelectric wind energy harvesting mechanism with flag-dragging the cantilever beam vibration

Hybrid power generators will improve the extraction of electrical energy from the wind to develop sustainable and eco-friendly self-powered wireless sensors. A novel piezo-triboelectric flag wind energy harvesting nanogenerator (P-FTENG) is proposed that consists of a piezoelectric cantilever beam and a triboelectric flag. The flag flutters in the wind, inducing vibration in the cantilever beam, thereby converting wind energy into electrical power with piezo and triboelectric effects. Based on the aerodynamic mechanism, a nonlinear flutter theoretical model is derived to evaluate the drag force and pressure of fluid separation on the piezo-triboelectric structure. Furthermore, this paper comprehensively elaborates on the transverse motion of the flag flutter caused by the airflow. The force from the transverse motion excites the cantilever beam. The power output of P-FTENG generation depends on various factors. The optimized flag-shaped configuration may activate the piezoelectric cantilever beam vibration and decrease the crucial flutter wind speed, according to test results. P-FTENG generates a voltage of around 17.8 V when the wind speed is 8.5 m/s. The cantilever beam energy harvester's PEH reaches 32 mW/m2, while Flag-TENG's output power density reaches 37 μW/m2, which charges capacitors and lights the array of LEDs. The hybrid piezo-triboelectric flag nanogenerator fluttering in the wind is promising for powering the function of a calculator or electronic thermometer/hygrometer sensor.

Flexible Organic Molecular Single Crystal-Based Triboelectric Device as a Self-Powered Tactile Sensor.

Triboelectric nanogenerators (TENGs) have proven to be effective at converting mechanical energy into electrical power, making them a viable technology for operating self-powered electronic devices used in medical diagnostics and environmental monitoring. In the present study, we demonstrate the utility of the flexible single crystals of an organic compound for the fabrication of a TENG as a self-powered tactile sensor. Triboelectrification was attained in single crystals as a result of surface functionalization with positively and negatively charged moieties, viz. Zn2+ and F-, respectively, which resulted in a variable surface potential and reversible adhesion through electrostatic interaction and induction phenomena. TENG incorporating the single crystals showed an output voltage of 2.4 V, a current density of ∼2.2 μA/m2, and a power density of ∼850 mW/m2 and was capable of charging commercial capacitors thereby ensuring its ability to be used as a self-powered touch sensor. Capitalizing on these features, a self-powered tactile sensor was fabricated to demonstrate limb movements. The excellent mechano-electric sensitivity (∼102 mV/kPa until 6 kPa range) and response time (∼38 ms) establish the viability of flexible organic single crystals for mechanical energy harvesting and biosensing applications that could pave the way for their utilization as biomedical wearable devices.

Sludge carbon promotes barium titanate piezoelectric property to activate persulfate degradation of enrofloxacin

AbstractBACKGROUNDPiezoelectric catalysis using perovskite‐type barium titanate (BaTiO3) has been applied to the decomposition of refractory organic pollutants through piezoelectric catalytic persulfate (PS). Nevertheless, challenges such as a limited specific surface area, poor electrical conductivity and a tendency towards agglomeration in BaTiO3 necessitate the exploration of novel methods to enhance its piezoelectric efficiency.RESULTSSludge carbon (SC) from sewage treatment and BaTiO3 was utilized to develop a novel piezoelectric catalytic material (BaTiO3/SC). The specific surface area of BaTiO3/SC reached 67.92 m2 g−1, which is nine times larger than that of BaTiO3 alone. The inclusion of SC in the composite enhanced the number of active sites and contributed to a higher degree of graphitization, improved electrical conductivity, and provided a more stable structure for BaTiO3/SC. This material was capable of harvesting mechanical vibration energy from ultrasound, thereby generating piezoelectric catalytic properties and activating PS to achieve a 93% decomposition ratio of enrofloxacin (ENR) in water within 80 min. The activation of PS by BaTiO3/SC piezocatalysis led to the production of reactive oxygen species (ROS), such as •OH and SO4−•. These ROS attack the quinolone ring of ENR, which is susceptible to cleavage, resulting in the decomposition of ENR into intermediates of lower toxicity.CONCLUSIONThe incorporation of SC has enhanced the piezoelectric performance of BaTiO3, rendering BaTiO3/SC a novel perovskite‐type piezoelectric catalytic material that improves piezoelectric efficiency. The BaTiO3/SC system, through its piezoelectric catalytic activation of PS, demonstrates potential for decomposition of refractory organic pollutants in water treatment. © 2024 Society of Chemical Industry (SCI).

Multifunctional Thermochromic Dye‐Integrated Hybrid Nanogenerators for Mechanical Energy Harvesting and Real‐Time IoT Sensing

AbstractHybrid nanogenerators are advanced mechanical energy harvesters capable of simultaneously scavenging multiple types of energy. Additionally, thermochromic materials provide a practical and visually assessable method for real‐time temperature monitoring. In this report, a novel energy harvester and sensing patch (EHSP) is introduced, that utilizes combined piezoelectric and triboelectric effects to harvest mechanical energy efficiently. To optimize the EHSP, various energy harvester configurations are fabricated and tested, and the dielectric properties of triboelectric films are systematically investigated. These improvements are implemented to augment the overall energy harvesting capability. The thermochromic properties of the EHSP are also explored to enhance both the electrical performance and thermal responsiveness. The EHSP demonstrates the ability to generate maximum voltage and current outputs of 350 V and 20.4 µA, respectively. Moreover, it can detect temperature changes within seconds, making it suitable for both energy harvesting and sensing applications. The EHSP is tested in practical scenarios, proving its efficiency as an energy harvester and sensor for everyday human activities. Furthermore, its integration with multiple hybrid nanogenerators showcases its potential for industrial and wearable sensing applications.

Modulating Contact Electrification With Metal‐Organic Frameworks in Flexible Triboelectric Nanogenerators for Kinetic Energy Harvesting and Self‐Powered Humidity Sensing Applications

AbstractHerein, we present a novel method for fabricating a triboelectric nanogenerator using Polyacrylonitrile (PAN) on both sides as triboelectric pairs, incorporating metal‐organic frameworks (MOFs) such as ZIF‐8, ZIF‐67, MIL‐100, and HKUST‐1 during the electrospinning process. The triboelectric properties of the MOF‐incorporated fibers are thus tailored and positioned within the triboelectric series for the first time. The resulting triboelectric polarity of the composite fiber is linked to the optical bandgap energy of the PAN and the MOF/PAN composite, facilitating electron transfer between materials of different work functions and leading to enhanced output in the developed triboelectric devices. Fascinatingly, the appropriate choice of MOF filler also displayed the potential for reversing the triboelectric polarity of PAN nanofiber. Consequently, incorporating ZIF‐8 and MIL‐100 into PAN nanofibers led notably to contrasting trends in triboelectric polarity, with the pair generating an open‐circuit output voltage of 100 V, short‐circuit current of 1.35 μA, and a power density of 18.4 mW/m2 respectively. The fabricated device demonstrated effectiveness for mechanical energy harvesting applications and also as a self‐powered humidity sensor, displaying rapid response to changes in ambient humidity levels with a maximum sensitivity of 2.14 V/%RH, for relative humidity range between 50 and 90% during the humidifying cycle.

The population growth model of electrostatic charges: A novel concept for engineering optimal performance triboelectric nanogenerators

Lateral sliding triboelectric nanogenerators LS-TENGs promise to combine low cost and high-efficiency mechanical energy harvesting at low frequency with the advantages of light weight and simple device architecture. To date, device power generation optimization has only been addressed on the framework of the optimal load resistance through the maximum power transfer theorem (MPTT). However, MPTT is a concept to optimize the power transferred from TENGs to loads, but not for optimizing the power generated by the TENG itself. In response, this work reports a concept that resembles the population growth model of species for designing enhanced performance LS-TENGs with optimal charge-generating rate. In this way, devices designed under the proposed concept possess a significantly enhanced optimal charge and power generation rate up to 3-fold and 8-fold respectively superior to those found for conventional rectangular TENGs with similar capacity, which allows us power up sustainably for hours low power consumption devices with a few minutes of mechanical energy harvesting. Thereby, this model aids in the development of enhanced performance LS-TENGs capable of collecting mechanical vibrations and optimally converting them into electrical energy by breaking the limits set by the MPTT, as well as opening a route towards batteryless power autonomy.