Mechanical Properties Of Skin Tissue Research Articles

Experimental study of the effect of temperature on collagen conformational changes in skin tissue welded by femtosecond laser

In this study, in vitro skin tissues were welded using various laser settings at four temperature ranges, 30–40 °C, 40–60 °C, 60–80 °C, and > 80 °C., Raman spectra between 500 and 2000 cm−1 were examined in order to examine the relationship between the changes of collagen and the mechanical properties of skin tissue bonding and the degree of thermal damage of tissue. How collagen in skin tissues changed into disordered and less stable structures due to the thermal damage, and how the structure of protein and amino acid-related bands changed with increasing temperature were analyzed. Analysis of the deconvolution of the amide I band (1580–1720 cm−1) and the secondary structure of collagen showed that the secondary structure of collagen changed from α-like helix-dominated to β-aggregate-dominated structures due to the thermal damage. As the temperature increased, the number of protein molecule chain dissociation and reconnection within the skin tissue increased, which contributed to the improvement of the tensile strength of the skin after welding. However, when the temperature was too high, the collagen structure presented an extremely unstable state, and the degree of protein denaturation increased, causing serious thermal damage. When the skin tissue was welded using the femtosecond laser process parameters of laser power of 18 W, scanning speed of 50 mm/s, and scanning 50 times, the tensile strength of the in vitro skin tissue incision was greater and the degree of protein denaturation was less. The degree of thermal damage characterized by the degree of protein denaturation was consistent with that characterized by the microstructure texture characteristics parameters of the skin tissue.

A statistical machine learning approach linking molecular conformational changes to altered mechanical characteristics of skin due to thermal injury

This article develops statistical machine learning models to predict the mechanical properties of skin tissue subjected to thermal injury based on the Raman spectra associated with conformational changes of the molecules in the burned tissue. Ex vivo porcine skin tissue samples were exposed to controlled burn conditions at 200 °F for five different durations: (i) 10s, (ii) 20s, (iii) 30s, (iv) 40s, and (v) 50s. For each burn condition, Raman spectra of wavenumbers 500-2000 cm−1 were measured from the tissue samples, and tensile testing on the same samples yielded their material properties, including, ultimate tensile strain, ultimate tensile stress, and toughness. Partial least squares regression models were established such that the Raman spectra, describing conformational changes in the tissue, could accurately predict ultimate tensile stress, toughness, and ultimate tensile strain of the burned skin tissues with R2 values of 0.8, 0.8, and 0.7, respectively, using leave-two-out cross validation scheme. An independent assessment of the resultant models showed that amino acids, proteins & lipids, and amide III components of skin tissue significantly influence the prediction of the properties of the burned skin tissue. In contrast, amide I has a lesser but still noticeable effect. These results are consistent with similar observations found in the literature on the mechanical characterization of burned skin tissue.

Tuning of a deformable image registration procedure for skin component mechanical properties assessment.

Several studies report the mechanical properties of skin tissues but their values largely depend on the measurement method. Therefore, we investigated the feasibility of recognizing the cellular constituents mechanical properties of pigmented skin by Confocal Laser Scanner Microscopy (CLSM). With this purpose, an healthy volunteer was examined in three areas nearby a pigmented skin lesion in two configurations: deforming and non deforming the nevus. The tissue displacement of the nevus was then assessed by means of deformable registration of the images in these two configurations. There are several registration strategy able to overcome this task, among them, we proposed two methods with different deformation models: a Free Form Deformation (FFD) model based on b-spline and a second one based on Demons Registration Algorithm (DRA). These two strategies need the definition of several parameters in order to obtain optimal registration performances. Thus, we tuned these parameters by means of simulated data and evaluated their registration abilities on the real in vivo CLSM acquisitions in the two configurations. The results showed that the registration using DRA had a better performance in comparison to the FFD one, in particular in two out of the three areas the DRA performance was significantly better than the FFD one. The registration procedure highlighted deformation differences among the chosen areas.

Measurement of the axial and circumferential mechanical properties of rat skin tissue at different anatomical locations.

Skin tissue is not only responsible for thermoregulation but also for protecting the human body from mechanical, bacterial, and viral insults. The mechanical properties of skin tissue may vary according to the anatomical locations in the body. However, the linear elastic and nonlinear hyperelastic mechanical properties of the skin in different anatomical regions and at different loading directions (axial and circumferential) so far have not been determined. In this study, the mechanical properties during tension of the rat abdomen and back were calculated at different loading directions using linear elastic and nonlinear hyperelastic material models. The skin samples were subjected to a series of tensile tests. The elastic modulus and maximum stress of the skin tissues were measured before the incidence of failure. The nonlinear mechanical behavior of the skin tissues was also computationally investigated through a constitutive equation. Hyperelastic strain energy density function was calibrated using the experimental data. The results revealed the anisotropic mechanical behavior of the abdomen and the isotropic mechanical response of the back skin. The highest elastic modulus was observed in the abdomen skin under the axial direction (10 MPa), while the lowest one was seen in the back skin under axial loading (5 MPa). The Mooney-Rivlin material model closely addressed the nonlinear mechanical behavior of the skin at different loading directions, which can be implemented in the future biomechanical models of skin tissue. The results might have implications not only for understanding of the isotropic and anisotropic mechanical behavior of skin tissue at different anatomical locations but also for providing more information for a diversity of disciplines, including dermatology, cosmetics industry, clinical decision making, and clinical intervention.

A NONLINEAR HYPERELASTIC BEHAVIOR TO IDENTIFY THE MECHANICAL PROPERTIES OF RAT SKIN UNDER UNIAXIAL LOADING

Skin is a thin membrane which provides many biological functions, such as thermoregulation and protection from mechanical, bacterial, and viral insults. The mechanical properties of skin tissue are extremely hard to measure and may vary according to the anatomical locations of a body. However, the mechanical properties of skin at different anatomical regions have not been satisfactorily simulated by conventional engineering models. In this study, the linear elastic and nonlinear hyperelastic mechanical properties of rat skin at different anatomical locations, including back and abdomen, are investigated using a series of tensile tests. The Young's modulus and maximum stress of skin tissue are measured before the incidence of failure. The nonlinear mechanical behavior of skin tissue is also experimentally and computationally investigated through constitutive equations. Hyperelastic strain energy density functions are adjusted using the experimental results. A hyperelastic constitutive model is selected to suitably represent the axial behavior of the skin. The results reveal that the maximum stress (20%) and Young's modulus (35%) of back skin are significantly higher than that of abdomen skin. The Ogden model is selected to closely address the nonlinear mechanical behavior of the skin which can be used in further biomechanical simulations of the skin tissue. The results might have implications not only for understanding of the mechanical behavior of skin tissue at different anatomical locations, but also to give an engineering insight for a diversity of disciplines, such as dermatology, cosmetics industry, clinical decision making, and clinical intervention.

DIRECTIONAL BIOMECHANICAL PROPERTIES OF PORCINE SKIN TISSUE

Skin is a multilayered composite material and composed principally of the proteins collagen, elastic fibers and fibroblasts. The direction-dependent material properties of skin tissue is important for physiological functions like skin expansion. The current study has developed methods to characterize the directional biomechanical properties of porcine skin tissues as studies have shown that pigs represent a useful animal model due to similarities between porcine and human skin. It is observed that skin tissue has a nonlinear anisotropy biomechanical behavior, where the parameters of material modulus is 378 ± 160 kPa in the preferred-fiber direction and 65.96 ± 40.49 kPa in the cross-fiber direction when stretching above 30% strain equibiaxially. The result from the study provides methods of characterizing biaxial mechanical properties of skin tissue, as the collagen fiber direction appears to be one of the primary determinants of tissue anisotropy.

Influences of supra-physiological temperatures on microstructure and mechanical properties of skin tissue

Thermal therapies under supra-physiological temperatures are increasingly used to treat skin diseases (e.g., superficial melanoma, removal of port-wine stains pigmented and cutaneous lesions). The efficacy of these therapies depends on the thermal and mechanical loadings that skin experiences during the treatment process. Therefore, it is of great significance to better understand the role of thermally induced changes in skin mechanical behavior and microstructure. In this study, rabbit belly skin was thermally damaged by immersing skin samples into saline solutions with controlled temperatures. We investigated the effect of thermal damage on skin mechanical behavior. We quantified the changes in skin microstructure (i.e., fiber, fibril) using histological staining and transmission electron microscopy (TEM). The results indicate that (i) the elastic modulus of skin, obtained by the uniaxial tensile test, decreased with increasing heating temperature; (ii) the skin tensile behavior was correlated with its microstructure changes induced by thermal denaturation of collagen fibers under supra-physiological temperatures; (iii) skin thermal damage predicted using the Arrhenius burn integration quantitatively agrees well with the evolution of the microstructure (i.e., percentage of the collagen area in Hematoxylin and Eosin (H&E) staining results). This study provides a better understanding of the coupled bio-thermo-mechanical behavior of skin tissue that could help to improve clinical thermal therapies.

Characterization of the mechanical behavior of human skin by means of impedance spectroscopy

There is increased interest for the use of impedance spectroscopy to measure skin dielectric properties in vivo. The aim of such measurements can be either to evaluate the hydration state of the skin, to detect diseased states such as skin cancer, to follow the progress of transdermal drug delivery, or simply to gather data on skin tissue impedance to be used in theoretical studies. However, obtaining reliable data can be difficult. Namely, skin is a highly nonhomogeneous multi-layered structure whose composition and dimensions differ depending on the location on the body and interindividual variations. Also, impedance measurements on skin are accompanied by a number of artefacts. We performed a series of impedance measurements using an Agilent/HP 4284A precision LCR meter with parallel plate electrodes pressed on the skin, at different locations on the body. We observed substantial impedance changes over the course of the measurement. These changes can be mainly attributed to skin deformation caused by the electrodes pressing against skin. The analysis showed that skin mechanical properties and layer thicknesses can be inferred from these temporal changes. Such data on mechanical properties of skin tissue give valuable extra information, crucial for successful estimation of the impedance of different skin layers.

Strain rate sensitivity of skin tissue under thermomechanical loading

There have been limited studies addressing the thermally dependent mechanical properties of skin tissue, although this can contribute to a variety of medical applications. To address this, an experimental study on the tensile behaviour of pig skin tissue under different thermal loading conditions and different mechanical stretching rates was performed. The results indicate that there is a significant variation among skin tensile behaviours under different temperatures and loading rates, which is correlated with dermal collagen denaturation. The Ogden model was used to summarize the effect of the strain rate and the temperature upon the measured constitutive response through two parameters (alpha and mu). These results can be used in future models to improve clinical thermal treatments for skin tissue.

Thermally-Induced Change in the Relaxation Behavior of Skin Tissue

Skin biothermomechanics is highly interdisciplinary, involving bioheat transfer, burn damage, biomechanics, and physiology. Characterization of the thermomechanical behavior of skin tissue is of great importance and can contribute to a variety of medical applications. However, few quantitative studies have been conducted on the thermally-dependent mechanical properties of skin tissue. The aim of the present study is to experimentally examine the thermally-induced change in the relaxation behavior of skin tissue in both hyperthermal and hypothermic ranges. The results show that temperature has great influence on the stress-relaxation behavior of skin tissue under both hyperthermal and hypothermic temperatures; the quantitative relationship that has been found between temperature and the viscoelastic parameter (the elastic fraction or fractional energy dissipation) was temperature dependent, with greatest dissipation at high temperature levels.

EFFECT OF THERMAL DAMAGE ON COMPRESSIVE BEHAVIOR OF SKIN TISSUE

Biothermomechanics of skin tissue is highly interdisciplinary, involving bioheat transfer, burn damage, biomechanics and physiology. Characterization of the thermomechanical behavior of skin tissue is of great importance and can contribute to a variety of medical applications. However, few studies have attempted to address the influence of heat induced thermal damage on the mechanical properties of skin tissue. This paper presents the compressive behavior of pigskin at different thermal damage levels and discusses the possible mechanisms of thermal damage–dependent compressive behavior of skin. The results demonstrate that skin stiffness decreases with increasing thermal damage degree and there exists strain rate sensitivity at different damage levels, caused mainly by hydration changes.

Partial purification of tomato fruit peroxidase and its effect on the mechanical properties of tomato fruit skin.

Peroxidase (EC 1.11.1.7)-mediated stiffening of cell walls within the fruit skin of tomato is hypothesized to regulate fruit growth. However, to date, there is no experimental evidence demonstrating that peroxidase affects the mechanical properties of skin tissue. Here, the mechanical properties of skin strips excised from a range of fruits at different ages were determined using an 'Instron' universal material testing instrument. The stiffness of tomato fruit skin strips increases 3-fold with increasing fruit age. Application of partially-purified peroxidase from the cell walls of mature tomato fruit skin significantly increased the stiffness of fruit skin irrespective of the age of fruit. Furthermore, the application of hydrogen peroxide significantly increased the stiffness of skin strips excised from fruit of an age when endogenous peroxidase isozymes associated with the termination of growth are first detected. The results support the hypothesis that the tomato fruit skin plays an integral role in the regulation of tomato fruit growth, and that changes in its mechanical properties may be mediated by peroxidase. As far as is known, this is the first demonstration that peroxidases alter the mechanical properties of the plant cell wall.