Mechanical Properties Of Hydrogels Research Articles

Cotton Fabric-Reinforced Hydrogels with Excellent Mechanical and Broad-Spectrum Photothermal Antibacterial Properties

Antibacterial hydrogel wound dressings hold great potential in eliminating bacteria and accelerating the healing process. However, it remains a challenge to fabricate hydrogel wound dressings that simultaneously exhibit excellent mechanical and photothermal antibacterial properties. Here we report the development of polydopamine-functionalized graphene oxide (rGO@PDA)/calcium alginate (CA)/Polypyrrole (PPy) cotton fabric-reinforced hydrogels (abbreviated as rGO@PDA/CA/PPy FHs) for tackling bacterial infections. The mechanical properties of hydrogels were greatly enhanced by cotton fabric reinforcement and an interpenetrating structure, while excellent broad-spectrum photothermal antibacterial properties based on the photothermal effect were obtained by incorporating PPy and rGO@PDA. Results indicated that rGO@PDA/CA/PPy FHs exhibited superior tensile strength in both the warp (289 ± 62.1 N) and weft directions (142 ± 23.0 N), similarly to cotton fabric. By incorporating PPy and rGO@PDA, the swelling ratio was significantly decreased from 673.5% to 236.6%, while photothermal conversion performance was significantly enhanced with a temperature elevated to 45.0 °C. Due to the synergistic photothermal properties of rGO@PDA and PPy, rGO@PDA/CA/PPy FHs exhibited excellent bacteria-eliminating efficiency for S. aureus (0.57%) and E. coli (3.58%) after exposure to NIR for 20 min. We believe that the design of fabric-reinforced hydrogels could serve as a guideline for developing hydrogel wound dressings with improved mechanical properties and broad-spectrum photothermal antibacterial properties for infected-wound treatment.

Natural Polyelectrolyte Hydrogels with Two Types of Cross-Links with Different Energy

For the first time, gels of a polymer cross-linked by two types of ionic cross-links of different energies, namely trivalent chromium (III) ions and divalent iron (II) ions, were prepared. The negatively charged polysaccharide xanthan, a polyelectrolyte of natural origin, was used as a polymer. A study of xanthan gels cross-linked with each cross-linker separately was carried out to identify the optimal concentrations of each cross-linker for the production of a double cross-linked gel. The mechanical properties of hydrogels under oscillatory shear deformations were then studied. It was demonstrated that the simultaneous use of two cross-linkers resulted in a synergistic increase in the elastic modulus (plateau storage modulus) compared to gels cross-linked with each cross-linker separately. For a gel with two types of cross-links, the elastic modulus was 16 Pa. In contrast, for gels cross-linked with either chromium (III) cations or iron (II) cations, the elastic modulus was approximately 0.6 and 0.5 Pa, respectively. The strong effect can be attributed to the different nature of cross-linking between xanthan macromolecules and chromium (III) and iron (II) cations, as well as the different strength of the cross-links formed. The optimal range of pH values was determined in which a synergistic increase in the elastic modulus of gels with two types of cross-links was observed compared to the corresponding gels cross-linked with each cross-linker separately. Consequently, the concurrent utilisation of two cross-linking agents that generate cross-links with disparate energy levels represents an efficacious strategy to improve the tensile strength of polymer hydrogels.

Tailoring Network Topology in Mechanically Robust Hydrogels for 3D Printing and Injection.

Tissue engineering and regenerative medicine are confronted with a persistent challenge: the urgent demand for robust, load-bearing, and biocompatible scaffolds that can effectively endure substantial deformation. Given that inadequate mechanical performance is typically rooted in structural deficiencies─specifically, the absence of energy dissipation mechanisms and network uniformity─a crucial step toward solving this problem is generating synthetic approaches that enable exquisite control over network architecture. This work systematically explores structure-property relationships in poly(ethylene glycol)-based hydrogels constructed utilizing thiol-yne chemistry. We systematically vary polymer concentration, constituent molar mass, and cross-linking protocols to understand the impact of architecture on hydrogel mechanical properties. The network architecture was resolved within the molecular model of Rubinstein-Panyukov to obtain the densities of chemical cross-links and entanglements. We employed both nucleophilic and radical pathways, uncovering notable differences in mechanical response, which highlight a remarkable degree of versatility achievable by tuning readily accessible parameters. Our approach yielded hydrogels with good cell viability and remarkably robust tensile and compression profiles. Finally, the hydrogels are shown to be amenable to advanced processing techniques by demonstrating injection- and extrusion-based 3D printing. Tuning the mechanism and network regularity during the cell-compatible formation of hydrogels is an emerging strategy to control the properties and processability of hydrogel biomaterials by making simple and rational design choices.

A Spontaneous In Situ Thiol-Ene Crosslinking Hydrogel with Thermo-Responsive Mechanical Properties.

The thermo-responsive behavior of Poly(N-isopropylacrylamide) makes it an ideal candidate to easily embed cells and allows the polymer mixture to be injected. However, P(NiPAAm) hydrogels possess minor mechanical properties. To increase the mechanical properties, a covalent bond is introduced into the P(NIPAAm) network through a biocompatible thiol-ene click-reaction by mixing two polymer solutions. Co-polymers with variable thiol or acrylate groups to thermo-responsive co-monomer ratios, ranging from 1% to 10%, were synthesized. Precise control of the crosslink density allowed customization of the hydrogel's mechanical properties to match different tissue stiffness levels. Increasing the temperature of the hydrogel above its transition temperature of 31 °C induced the formation of additional physical interactions. These additional interactions both further increased the stiffness of the material and impacted its relaxation behavior. The developed optimized hydrogels reach stiffnesses more than ten times higher compared to the state of the art using similar polymers. Furthermore, when adding cells to the precursor polymer solutions, homogeneous thermo-responsive hydrogels with good cell viability were created upon mixing. In future work, the influence of the mechanical micro-environment on the cell's behavior can be studied in vitro in a continuous manner by changing the incubation temperature.

Rationally designed β-cyclodextrin-crosslinked polyacrylamide hydrogels for cell spheroid formation and 3D tumor model construction

In vitro tumor models are essential for understanding tumor behavior and evaluating tumor biological properties. Hydrogels that can mimic the tumor extracellular matrix have become popular for creating 3D in vitro tumor models. However, designing biocompatible hydrogels with appropriate chemical and physical properties for constructing tumor models is still a challenge. In this study, we synthesized a series of β-cyclodextrin (β-CD)-crosslinked polyacrylamide hydrogels with different β-CD densities and mechanical properties and evaluated their potential for use in 3D in vitro tumor model construction, including cell capture and spheroid formation. By utilizing a combination of β-CD-methacrylate (CD-MA) and a small amount of N,N′-methylene bisacrylamide (BIS) as hydrogel crosslinkers and optimizing the CD-MA/BIS ratio, the hydrogels performed excellently for tumor cell 3D culture and spheroid formation. Notably, when we co-cultured L929 fibroblasts with HeLa tumor cells on the hydrogel surface, co-cultured spheroids were formed, showing that the hydrogel can mimic the complexity of the tumor extracellular matrix. This comprehensive investigation of the relationship between hydrogel mechanical properties and biocompatibility provides important insights for hydrogel-based in vitro tumor modeling and advances our understanding of the mechanisms underlying tumor growth and progression.

Bioinspired 3D printed elastomer-hydrogel hybrid with robust interfacial bonding for flexible ionotronics

Hydrogels are widely used in flexible ionotronics due to their continuous conductive phase and good biocompatibility. However, their poor mechanical properties affect their stability and lifespan. It is a significant challenge to prepare hydrogels with both high conductivity and mechanical strength, as improving the mechanical properties often results in a tighter network, which reduces electrical conductivity. Human skin is composed of a stiff collagen fibril scaffold for resisting external damage, and a soft matrix that detect various stimuli through ion transport. Herein, inspired by the structure of human skin, a hydrogel composite with remarkable mechanical properties, high ionic conductivity, and self-healing property is prepared. The composite structure with 3D printed elastomeric skeleton and hydrogel matrix, addresses both the contradiction between the ionic conductivity and mechanical properties of hydrogels, as well as the difficulty of realizing complex macrostructures of the skeleton. The issue of weak interface in composites is resolved by creating interfacial covalent bonds. The composite’s self-healing property, combined with a robust interface, ensure the stability and longevity of the composite when used as flexible sensors. This novel approach of creating robust interface is also employed in the encapsulation of hydrogels and the fabrication of flexible microcircuits.

Preparation and evaluation of chitosan/MCM-41-based spongy hydrogels loaded with tea tree oil

In this study, chitosan, polyvinyl alcohol, gelatin, MCM-41 and tea tree oil (TTO) were used as raw materials. MCM-41-based spongy hydrogels loaded with TTO were synthesized by physical cross-linking method. The TTO was first adsorbed into MCM-41 s. Then different contents of MCM-41 s were added to the hydrogel, which affected the properties of the hydrogel. The structure of hydrogels was analyzed by scanning electron microscopy (SEM) and attenuated total internal reflectance Fourier transform infrared spectroscopy (ATR-FTIR). The mechanical properties of hydrogels were determined by swelling, degradation and ductility evaluation. The antibacterial effect and biocompatibility were determined by in vitro antibacterial and cytotoxicity examinations. In this study, the mechanical property of the hydrogels was enhanced with the increasing content of MCM-41 s. The hydrogels exhibited an excellent antibacterial effect attributed to the synergistic interaction between TTO and chitosan. Furthermore, the hydrogels showed superior biocompatibility property. In conclusion, the hydrogels prepared in this study have great potential for expanding their applications in the bacteriostatic field.

Evaluation of gelatin bloom strength on gelatin methacryloyl hydrogel properties

Gelatin methacryloyl (GelMA) hydrogels are widely used for a variety of tissue engineering applications. The properties of gelatin can affect the mechanical properties of gelatin gels; however, the role of gelatin properties such as bloom strength on GelMA hydrogels has not yet been explored. Bloom strength is a food industry standard for describing the quality of gelatin, where higher bloom strength is associated with higher gelatin molecular weight. Here, we evaluate the role of bloom strength on GelMA hydrogel mechanical properties. We determined that both bloom strength of gelatin and weight percent of GelMA influenced both stiffness and viscoelastic ratio; however, only bloom strength affected diffusivity, permeability, and pore size. With this library of GelMA hydrogels of varying properties, we then encapsulated Swan71 trophoblast spheroids in these hydrogel variants to assess how bloom strength affects trophoblast spheroid morphology. Overall, we observed a decreasing trend of spheroid area and Feret diameter as bloom strength increased. In identifying clear relationships between bloom strength, hydrogel mechanical properties, and trophoblast spheroid morphology, we demonstrate that bloom strength should considered when designing tissue engineered constructs.

Fibrin-Based Hydrogels with Reactive Amphiphilic Copolymers for Mechanical Adjustments Allow for Capillary Formation in 2D and 3D Environments.

This study focuses on enhancing controllable fibrin-based hydrogels for tissue engineering, addressing existing weaknesses. By integrating a novel copolymer, we improved the foundation for cell-based angiogenesis with adaptable structural features. Tissue engineering often faces challenges like waste disposal and nutrient supply beyond the 200 µm diffusion limit. Angiogenesis breaks through this limitation, allowing the construction of larger constructs. Our innovative scaffold combination significantly boosts angiogenesis, resulting in longer branches and more capillary network junctions. The copolymer attached to fibrin fibers enables precise adjustment of hydrogel mechanical dynamic properties for specific applications. Our material proves effective for angiogenesis, even under suppression factors like suramin. In our study, we prepared fibrin-based hydrogels with and without the copolymer PVP12400-co-GMA10mol%. Using a co-culture system of human umbilical vein endothelial cells (HUVEC) and mesenchymal stem cells (MSC), we analyzed angiogenetic behavior on and within the modified hydrogels. Capillary-like structures were reproducibly formed on different surfaces, demonstrating the general feasibility of three-dimensional endothelial cell networks in fibrin-based hydrogels. This highlights the biomaterial's suitability for in vitro pre-vascularization of biohybrid implants.

A well plate-based GelMA photo-crosslinking system with tunable hydrogel mechanical properties to regulate the PTH-mediated osteogenic fate

Versatile and efficient regulation of the mechanical properties of the extracellular matrix is crucial not only for understanding the dynamic changes in biological systems, but also for obtaining precise and effective cellular responses in drug testing. In this study, we developed a well plate-based hydrogel photo-crosslinking system to effectively control the mechanical properties of hydrogels and perform high-throughput assays. We improved cell biocompatibility by using gelatin methacryloyl (GelMA) with a visible light photo-crosslinking method. Multiple cell-laden GelMA hydrogels were simultaneously and uniformly created using multi-arrayed 520 nm light-emitting diodes in a well plate format. The elastic modulus of the hydrogels can be widely adjusted (0.5–30 kPa) using a photo-crosslinking system capable of independently controlling the light intensity or exposure time for multiple samples. We demonstrate the feasibility of our system by observing enhanced bone differentiation of human mesenchymal stem cells (hMSCs) cultured on stiffer hydrogels. Additionally, we observed that the osteogenic fate of hMSCs, affected by the different mechanical properties of the gel, was regulated by parathyroid hormone (PTH). Notably, in response to PTH, hMSCs in a high-stiffness microenvironment upregulate osteogenic differentiation while exhibiting increased proliferation in a low-stiffness microenvironment. Overall, the developed system enables the generation of multiple cell-laden three-dimensional cell culture models with diverse mechanical properties and holds significant potential for expansion into drug testing.

The Formulation and Characterization of Wound Dressing Releasing S-Nitrosoglutathione from Polyvinyl Alcohol/Borax Reinforced Carboxymethyl Chitosan Self-Healing Hydrogel.

Self-healing hydrogels often lack mechanical properties, limiting their wound-dressing applications. This study introduced S-Nitrosoglutathione (GSNO) to self-healing hydrogel-based wound dressings. Self-healing hydrogel mechanical properties were improved via polymer blends. Applying this hydrogel to the wound site allows it to self-heal and reattach after mechanical damage. This work evaluated polyvinyl alcohol (PVA)-based self-healing hydrogels with borax as a crosslinking agent and carboxymethyl chitosan as a mechanical property enhancer. Three formulations (F1, F4, and F7) developed self-healing hydrogels. These formulations had borax concentrations of 0.8%, 1.2%, and 1.6%. An FTIR study shows that borate ester crosslinking and hydrogen bonding between polymers generate a self-healing hydrogel. F4 has a highly uniform and regular pore structure, as shown by the scanning electron microscope image. F1 exhibited faster self-healing, taking 13.95 ± 1.45 min compared to other formulations. All preparations had pH values close to neutrality, making them suitable wound dressings. Formula F7 has a high drug content (97.34 ± 1.21%). Good mechanical qualities included high tensile stress-strain intensity and Young's modulus. After 28 h of storage at -20 °C, 5 °C, and 25 °C, the self-healing hydrogel's drug content dropped significantly. The Korsmeyer-Peppas release model showed that the release profile of GSNO followed Fickian diffusion. Thus, varying the concentration of crosslinking agent and adding a polymer affects self-healing hydrogels' physicochemical properties.

Sodium lignosulfonate doped polyvinyl alcohol-based hydrogel conductive composites based on ion-specific effects with continuously tunable mechanical properties and excellent conductive sensing properties

Hydrogels have great application prospects in the fields of bionics, soft tissue probes, and motion detection, etc. However, the high water content and loose cross-linker structure of hydrogels lead to weak mechanical properties, which limits their application and development. Therefore, in this study, sodium lignosulfonate doped polyvinyl alcohol hydrogels (PVA/LS) were constructed using polyvinyl alcohol as the matrix and sodium lignosulfonate as the filler; the hydrogels were also treated with different ionic solutions to construct ion-responsive hydrogels (PVA/LS/ION); and ion-conducting hydrogels (PVA/LS/CL) were constructed by the change of the concentration of sodium chloride (NaCl) solution. The hydrophilicity of the polyvinyl alcohol (PVA) molecular chain was changed by different ions, resulting in either water absorption (salting in) or dehydration (salting out), and the hydrogel mechanical properties could be adjusted over a wide range (tensile strength: 77 kPa ∼ 3.26 MPa; elongation at break: 290 ∼ 870%; modulus: 24 ∼ 563 kPa; toughness: 96 kJ/m3 ∼ 14.1 MJ/m3). In addition, the hydrogels have good conductivity regulation (1.09 ∼ 2.72 S/m) and sensing properties, with GF values up to 1.23, and sensitive and stable strain sensing properties. This work provides useful insights into the application of ion-specific effects to the field of hydrogels.

Neutrophil Granulopoiesis Optimized Through Ex Vivo Expansion of Hematopoietic Progenitors in Engineered 3D Gelatin Methacrylate Hydrogels.

Neutrophils are the first line of defense of the innate immune system. In response to methicillin-resistant Staphylococcus aureus infection in the skin, hematopoietic stem, and progenitor cells (HSPCs) traffic to wounds and undergo extramedullary granulopoiesis, producing neutrophils necessary to resolve the infection. This prompted the engineering of a gelatin methacrylate (GelMA) hydrogel that encapsulates HSPCs within a matrix amenable to subcutaneous delivery. The authors study the influence of hydrogel mechanical properties to produce an artificial niche for granulocyte-monocyte progenitors (GMPs) to efficiently expand into functional neutrophils that can populate infected tissue. Lin-cKIT+ HSPCs, harvested from fluorescent neutrophil reporter mice, are encapsulated in GelMA hydrogels of varying polymer concentration and UV-crosslinked to produce HSPC-laden gels of specific stiffness and mesh sizes. Softer 5% GelMA gels yield the most viable progenitors and effective cell-matrix interactions. Compared to suspension culture, 5% GelMA results in a twofold expansion of mature neutrophils that retain antimicrobial functions including degranulation, phagocytosis, and ROS production. When implanted dermally in C57BL/6J mice, luciferase-expressing neutrophils expanded in GelMA hydrogels are visualized at the site of implantation for over 5 days. They demonstrate the potential of GelMA hydrogels for delivering HSPCs directly to the site of skin infection to promote local granulopoiesis.

Accelerating the remodeling of collagen in cutaneous full-thickness wound using FIR soldering technology with bio-targeting nanocomposites hydrogel.

A novel composite wound dressing hydrogel by incorporating single-walled carbon nanotubes and indocyanine green into a dual-crosslinked hydrogel through Schiff base reaction was developed. The objective was to prevent wound infection and enhance the thermal effect induced by laser energy. The hydrogel matrix was constructed using oxidized gelatin, pre-crosslinked with calcium ions, along with carboxymethyl chitosan, crosslinked via Schiff base reaction. Optimization of the blank hydrogel's gelation time, swelling index, degradation rate, and mechanical properties was achieved by adding 0.1% SWCNT and 0.1% ICG. Among them, the SWCNT-loaded hydrogel BCG-SWCNT exhibited superior performance overall: a gelation time of 102 s; a swelling index above 30 after equilibrium swelling; a degradation rate of 100.5% on the seventh day; and a compressive modulus of 8.8 KPa. It displayed significant inhibition against methicillin-resistant Staphylococcus aureus infection in wounds. When combined with laser energy usage, the composite hydrogel demonstrated excellent pro-healing activity in rats.

Load-bearing columns inspired fabrication of ductile and mechanically enhanced BSA hydrogels

Currently, protein-based hydrogels are widely applied in soft materials, tissue engineering and implantable scaffolds owing to their excellent biocompatibility, and degradability. However, most protein-based hydrogels are soft brittle. In this study, a ductile and mechanically enhanced bovine serum albumin (BSA) hydrogel is fabricated by soaking the a 1-(3-dimethylaminopropyl)-3ethylcarbodiimide hydrochloride/N-hydroxysuccinimide (EDC/NHS) induced BSA hydrogel in (NH4)2SO4 solution. An EDC/NHS coupling reaction induce protein coupling reactions that cause the BSA skeleton to resemble architectural load-bearing walls, protecting the integrity of the hydrogel and preventing collapse. The effects of the BSA and (NH4)2SO4 concentrations on the hydrogel mechanics are evaluated, and the possible strengthening mechanism is discussed. Besides, the highly kosmotropic ions greatly enhance the hydrophobic interaction within BSA gels and dehydration effect and their mechanical properties were significantly enhanced. The various mechanical properties of hydrogels can be regulated over a large window by soaking hydrogels into various ions. And most of them can be washed away, maintaining high biocompatibility of the protein. Importantly, the protein hydrogels prepared by this strategy could also be modified as strain sensors. In a word, this work demonstrates a new, universal method to provide multi-functional, biocompatible, strength enhanced and regulable mechanical pure protein hydrogel, combining the Hofmeister effect with -NH2/-COOH association groups.

Rational Design of Dynamically Super-Tough and Super-Stretchable Hydrogels for Deformable Energy Storage Devices.

Hydrogels possess unique polymer networks that offer flexibility/stretchability, high ionic conductivity, and resistance to electrolyte leakage, making them suitable for deformable energy storage devices. Endowing the mechanical functionality of the hydrogel electrolytes focus on either enhancing the stretchability or the toughness. However, the stretchability and the toughness are generally a trade-off that the stretchable gels are intrinsically prone to damage and sensitive to notches and cracks. Here, the regulating strategies on the hydrogel's mechanical properties are provided to develop the designated hydrogel electrolyte, where different polymeric network structures are constructed, including single network structures, semi-interpenetrating network structures, and interpenetrating dual-network structures. A comprehensive comparison of these polymer network structures is conducted to evaluate their mechanical stretchability and toughness. Designing super-tough and super-stretchable hydrogels based on specific application requirements can be realized by striking a balance by regulating the hydrogel structure. In specific, incorporating semi-interpenetrating networks significantly can enhance stretchability to achieve a break elongation up to 1300%, while the interpenetrating dual-networks can largely improve the toughness to realize the extraordinary fracture toughness of 6.843kJm-2 . These findings offer valuable designing guidance for designated hydrogel electrolytes and the deformable zinc-silver battery is demonstrated with high mechanical stability and electrochemical performance.

Synthesis, Characterization and Catechol-Based Bioinspired Adhesive Properties in Wet Medium of Poly(2-Hydroxyethyl Methacrylate-co-Acrylamide) Hydrogels.

Hydrogels consist of crosslinked hydrophilic polymers from which their mechanical properties can be modulated for a wide variety of applications. In the last decade, many catechol-based bioinspired adhesives have been developed following the strategy of incorporating catechol moieties into polymeric backbones. In this work, in order to further investigate the adhesive properties of hydrogels and their potential advantages, several hydrogels based on poly(2-hydroxyethyl methacrylate-co-acrylamide) with N'N-methylene-bisacrylamide (MBA), without/with L-3,4-dihydroxyphenylalanine (DOPA) as a catecholic crosslinker, were prepared via free radical copolymerization. 2-Hydroxyethyl methacrylate (HEMA) and acrylamide (AAm) were used as comonomers and MBA and DOPA both as crosslinking agents at 0.1, 0.3, and 0.5 mol.-%, respectively. The polymeric hydrogels were characterized by Fourier transform infrared spectroscopy (FT-IR), thermal analysis and swelling behavior analysis. Subsequently, the mechanical properties of hydrogels were determined. The elastic properties of the hydrogels were quantified using Young's modulus (stress-strain curves). According to the results herein, the hydrogel with a feed monomer ratio of 1:1 at 0.3 mol.-% of MBA and DOPA displayed the highest rigidity and higher failure shear stress (greater adhesive properties). In addition, the fracture lap shear strength of the biomimetic polymeric hydrogel was eight times higher than the initial one (only containing MBA); however at 0.5 mol.-% MBA/DOPA, it was only two times higher. It is understood that when two polymer surfaces are brought into close contact, physical self-bonding (Van der Waals forces) at the interface may occur in an -OH interaction with wet contacting surfaces. The hydrogels with DOPA provided an enhancement in the flexibility compared to unmodified hydrogels, alongside reduced swelling behavior on the biomimetic hydrogels. This approach expands the possible applications of hydrogels as adhesive materials, in wet conditions, within scaffolds that are commonly used as biomaterials in cartilage tissue engineering.

Dynamic Exchange in 3D Cell Culture Hydrogels Based on Crosslinking of Cyclic Thiosulfinates

AbstractDynamic polymer materials are highly valued substrates for 3D cell culture due to their viscoelasticity, a time‐dependent mechanical property that can be tuned to resemble the energy dissipation of native tissues. Herein, we report the coupling of a cyclic thiosulfinate, mono‐S‐oxo‐4‐methyl asparagusic acid, to a 4‐arm PEG‐OH to prepare a disulfide‐based dynamic covalent hydrogel with the addition of 4‐arm PEG‐thiol. Ring opening of the cyclic thiosulfinate by nucleophilic substitution results in the rapid formation of a network showing a viscoelastic fluid‐like behaviour and relaxation rates modulated by thiol content through thiol‐disulfide exchange, whereas its viscoelastic behaviour upon application as a small molecule linear crosslinker is solid‐like. Further introduction of 4‐arm PEG‐vinylsulfone in the network yields a hydrogel with weeks‐long cell culture stability, permitting 3D culture of cell types that lack robust proliferation, such as human pluripotent stem cell‐derived cardiomyocytes (hPSC‐CMs). These cells display native behaviours such as cell elongation and spontaneous beating as a function of the hydrogel's mechanical properties. We demonstrate that the mode of dynamic cyclic thiosulfinate crosslinker presentation within the network can result in different stress relaxation profiles, opening the door to model tissues with disparate mechanics in 3D cell culture.

Dynamic Exchange in 3D Cell Culture Hydrogels Based on Crosslinking of Cyclic Thiosulfinates.

Dynamic polymer materials are highly valued substrates for 3D cell culture due to their viscoelasticity, a time-dependent mechanical property that can be tuned to resemble the energy dissipation of native tissues. Herein, we report the coupling of a cyclic thiosulfinate, mono-S-oxo-4-methyl asparagusic acid, to a 4-arm PEG-OH to prepare a disulfide-based dynamic covalent hydrogel with the addition of 4-arm PEG-thiol. Ring opening of the cyclic thiosulfinate by nucleophilic substitution results in the rapid formation of a network showing a viscoelastic fluid-like behaviour and relaxation rates modulated by thiol content through thiol-disulfide exchange, whereas its viscoelastic behaviour upon application as a small molecule linear crosslinker is solid-like. Further introduction of 4-arm PEG-vinylsulfone in the network yields a hydrogel with weeks-long cell culture stability, permitting 3D culture of cell types that lack robust proliferation, such as human pluripotent stem cell-derived cardiomyocytes (hPSC-CMs). These cells display native behaviours such as cell elongation and spontaneous beating as a function of the hydrogel's mechanical properties. We demonstrate that the mode of dynamic cyclic thiosulfinate crosslinker presentation within the network can result in different stress relaxation profiles, opening the door to model tissues with disparate mechanics in 3D cell culture.

Characterization of drying-induced changes in moduli and internal stresses in a constrained gel using laser vibrometry.

Hydrogels, water-saturated polymer networks find widespread use in soft robotics, biomedical, pharmaceutical and food industries. Both solid and water constituents of hydrogels are sensitive to external stimuli such as temperature, humidity, osmolarity, and light. For instance, common hydrogels swell or shrink in the presence of chemical potential gradient between the sample and surrounding environment. Corresponding changes in internal water content lead to significant changes in mechanical properties of hydrogels. Besides, internal stresses build up if the gel samples are constrained during swelling or dehydration. In the present research, we utilize modal analyses technique on drying hydrogels to identify dehydration-induced changes in elastic moduli and internal stresses. In particular, natural frequencies and damping ratios of the first two axisymmetric transverse vibration modes are measured on clamped gelatin disks using non-contact laser vibrometry at various water loss states. Experimental modal frequencies are then compared to the predictions of a pre-stressed thick plate model. The evolutions of elastic moduli and internal stresses for water losses up to 80% are identified. The broadband loss capacity of gelatin is also determined from the measured modal damping ratios. Highly transient mechanical response observed on the gelatin disks further demonstrates the need for non-contact and rapid mechanical characterization of hydrogels. As illustrated in this work, vibration and wave-based techniques are promising candidates to fulfill that need.