Improvement Of Mechanical Properties Research Articles

Polyimide Aerogel Fiber Bundles for Extreme Thermal Management Systems in Aerospace Applications.

Aerogel fibers are an emerging class of ultralightweight materials, which, compared to conventional bulk monolithic and aerogel films, provide better flexibility and extensibility. Despite the recent advancements in this field, due to their highly porous structure, their mechanical properties can be deteriorated. Inspired by the textile industry, we report the development of aerogel fiber bundles with twisted structures as a promising strategy to enhance the mechanical performance and practicality of aerogel fibers. Polyimide (PI) aerogel fibers were prepared via the sol-gel confined transition method. The fibers showed a unique nanostructured assembly with high specific surface area, excellent optical transparency, outstanding flexibility at diverse extreme conditions, self-extinguishing behavior, and superior thermal insulation performance. Using PI aerogel fibers as the backbone, aerogel fiber bundles in various configurations were designed and fabricated. A systematic study was performed to analyze the effect of design parameters on the mechanical performance of the bundles. Results revealed an optimal twist level for bundles, leading to a peak in mechanical properties across various bundle configurations. The observed improvement in mechanical properties was attributed to increased fiber-to-fiber binding strength, enhanced friction, and interlocking mechanism of fibers, underscoring the potential of the optimized twist level for enhancing the performance of aerogel fiber bundles. Overall, the development of aerogel fiber bundles holds great promise in revolutionizing the production of high-performance ultralightweight materials for thermal management applications.

Pharmacological antagonism of Ccr2+ cell recruitment to facilitate regenerative tendon healing.

Successful tendon healing requires sufficient deposition and remodeling of new extracellular matrix at the site of injury, with this process mediating in part through fibroblast activation via communication with macrophages. Moreover, resolution of healing requires clearance or reversion of activated cells, with chronic interactions with persistent macrophages impairing resolution and facilitating the conversion to fibrotic healing. As such, modulation of the macrophage environment represents an important translational target to improve the tendon healing process. Circulating monocytes are recruited to sites of tissue injury, including the tendon, via upregulation of cytokines including Ccl2, which facilitates recruitment of Ccr2+ macrophages to the healing tendon. Our prior work has demonstrated that Ccr2-/- can modulate fibroblast activation and myofibroblast differentiation. However, this approach lacked temporal control and resulted in healing impairments. Thus, in the current study we have leveraged a Ccr2 antagonist to blunt macrophage recruitment to the healing tendon in a time-dependent manner. We first tested the effects of Ccr2 antagonism during the acute inflammatory phase and found that this had no effect on the healing process. In contrast, Ccr2 antagonism during the early proliferative/granulation tissue period resulted in significant improvements in mechanical properties of the healing tendon. Collectively, these data demonstrate the temporally distinct impacts of modulating Ccr2+ cell recruitment and Ccr2 antagonism during tendon healing and highlight the translational potential of transient Ccr2 antagonism to improve the tendon healing process.

Impact of graphene oxide lateral sizes on the mechanical and thermal properties of carbon fiber composites

AbstractThe impact of carbon fiber (CF) composites sizing with graphene oxide (GO) to form brick‐and‐mortar structures on their mechanical properties and thermal conductivity has not been closely examined. This study systematically investigates the effect of GO sheet size on the interfacial properties and thermal conductivity of CF composites. Three sizes of GO—small (0.11 μm), medium (0.33 μm), and large (0.97 μm)—were used to modify CF surfaces via layer‐by‐layer self‐assembly, forming the brick‐and‐mortar structures. The mechanical properties were assessed through flexural tests, interlaminar shear strength (ILSS) tests and tensile tests, while thermal conductivity was measured using a thermal constant analyzer. The results revealed that medium‐sized GO (GO‐M) significantly enhanced the interfacial strength and toughness of the composites. This improvement is attributed to the orderly arrangement of GO‐M on the CF surface, which enhances stress transfer between the fiber and the matrix. In contrast, small‐sized GO (GO‐S) tended to scatter, resulting in less effective reinforcement, while large‐sized GO (GO‐L) exhibited stacking and agglomeration, limiting its reinforcement effectiveness. However, GO‐L provided the highest thermal conductivity due to the formation of continuous heat conduction pathways. These findings suggest that GO‐M offers a balanced improvement in mechanical properties, whereas GO‐L is more suitable for applications requiring high thermal conductivity. This work underscores the importance of selecting the appropriate GO sheet size to optimize the interfacial properties and thermal conductivity of CF composites, which is crucial for enhancing their performance in high‐end engineering applications, such as aerospace, automotive, and marine industries.Highlights Modification of CF composites by GO‐M sheets significantly improved toughness and strength. GO‐L sheets formed an effective heat transfer channel with the highest thermal conductivity. The study emphasized the critical role of selecting the appropriate GO sheet size to optimize the mechanical and thermal properties of CF composites.

Improvement of mechanical properties of Mg2Si phase system by doping transition metals: a first-principles study

Improvement of mechanical properties of Mg2Si phase system by doping transition metals: a first-principles study

A high toughness hydrogel with Dy3+ enhanced fluorescence properties: For visual Zn2+ detection

Rapid, portable, and sensitive detection of Zn2+ is crucial for human health. In this study, SA/PEG/Ln fluorescent hydrogels were synthesized via in situ polymerization with lanthanide metals (Tb3+/Dy3+) and PAM. The results demonstrated a significant improvement in mechanical properties (132.8 % increase in compressive properties) after rare earth doping. The addition of Dy3+ enhanced the fluorescence properties of the singly doped Tb3+ fluorescent hydrogel (maximum luminous intensity increased by 1900 cd). Monitoring changes in fluorescence intensity enabled the realization of Zn2+ detection, allowing for quick and accurate determination of zinc ion presence. Visual monitoring of Zn2+ was achieved with the assistance of a portable ultraviolet lamp.

Study on mechanical and electrical properties improvement of insulating paper modified by cellulose nanocrystals

Study on mechanical and electrical properties improvement of insulating paper modified by cellulose nanocrystals

Improvement of Formation, Microstructure and Mechanical Properties of TIG Welded TC4 Titanium Alloy by Ultrasonic Coaxial Radiation

Improvement of Formation, Microstructure and Mechanical Properties of TIG Welded TC4 Titanium Alloy by Ultrasonic Coaxial Radiation

Cemented sand under hollow cylinder multiaxial loading

Improvement of granular soils mechanical properties can be achieved by the addition of bonding agents. In this research, low amount of Portland cement was added to a sand and its beneficial shear strengthening effects were evaluated under a range of multiaxial stress paths. The influence of the orientation of the principal axes of stress and strain on the stress-strain response and failure of cemented sand has only been scarcely investigated. Therefore, this experimental investigation reports the results of a series of consolidated drained hollow cylinder torsional tests with constant principal stress path direction, ασ, varying from 0° to 90° Results were compared with the shear behaviour of the uncemented sand tested under similar loading conditions. Results show that the addition of cement to the sand matrix increases the soil strength for all multiaxial stress path directions. The suitability of two multiaxial strength criteria for reproducing the shape of the failure envelope as a function of the orientation of principal stress axis ασ has also been analysed.

Comparison of copper-based composites fabricated by cross-accumulative roll bonding method for packaging design

Copper-based composites have interesting properties and they are widely used in electronics, packaging, and automotive applications. In the present work, the cross-accumulative roll bonding (CARB) process was used to fabricate Cu-based composites with Zn and Brass reinforcing layers. The experimental observations revealed a clear relationship between rolling strain and plastic instabilities including the necking and rupture of reinforcement. However, the grain refinement was observed on Cu, Zn, and Brass layers after seven CARB cycles, indicating the positive impact of rolling rotation on obtaining the ultrafine grains. Better ductility of Brass also resulted in finer grains. This also led to more significant improvement in mechanical properties. During the CARB process, the hardness of Zn and Brass increased from 59 HV and 250 HV to 89 HV and 310 HV, respectively.

Bio-inspired synthesis of nanocrystalline calcite demonstrating significant improvement in mechanical properties of concrete: a construction-nanobiotechnology approach.

The bioinspired synthesis of construction material, known as biocement, represents a significant advancement in addressing the environmental sustainability issues associated with traditional cement use in the built environment. Biocement is produced through the process of microbially induced bio-mineralization (MIBM), which offers a promising alternative or supplement to conventional cement, potentially reducing its consumption. Despite extensive literature on the application of biocement in construction biotechnology, the fundamental mechanisms underlying its ability to enhance concrete quality remain poorly understood. This study focuses on the kinetics of biomineral synthesis by two Bacillus species; Bacillus megaterium RB05 and Bacillus foraminis DRG5, to identify the most effective strain for biomineralization. Bioconcrete specimens were created by adding inoculum containing Bacillus megaterium RB05 cells with a nutrient solution to the concrete mixture in a layer-by-layer approach. After 28days of water curing, nanoparticles of CaCO3, ranging in size from 27 to 82nm, were produced in the bioconcrete specimens. The resulting concrete, containing nanocrystalline biogenic calcite, demonstrated significant improvements in mechanical properties. Specifically, compressive and tensile strengths of the bioconcrete, tested using a universal testing machine (UTM), increased by 7.69 ± 0.08% and 22 ± 0.1%, respectively, after 72h of curing. Additionally, the biocement was found to exhibit an organic-inorganic hybrid nature, as identified by TEM, EDAX, FESEM, FTIR, and XRD analyses. The enhanced mechanical properties were attributed to the high surface-to-volume ratio and hybrid nature of the calcite nanoparticles. The findings of this investigation are encouraging, suggesting the potential development of future green and self-sustainable construction materials or bioconcrete.

FABRICATION OF AA1100/Fl2O3 COMPOSITE STRIPS AND THE IMPROVEMENT OF THEIR ELECTROMAGNETIC, MECHANICAL AND FRACTURE PROPERTIES

In this study, forming limit diagrams (FLDs), fracture toughness (FT), mechanical, magnetic, and electro-physical properties of Al/Fe2O3 composites have been investigated experimentally. Accumulative-roll-bonding (ARB) process was used to manufacture composite samples. Then, Al/Fe2O3 composites have been produced at 300∘C up to eight ARB passes. Also, magnetic composites have been fabricated with 0, 5% and 10[Formula: see text]wt.% of particles. The interlayer bonding quality was improved at higher passes. By studying the SEM rapture morphology, it was shown that the rapture mode changed to shear ductile for samples with more passes. For composite samples fabricated at higher passes and in comparison with the annealed sample, elongated dimples were turned to shallow dimples. FLDs area as the main forming criterion dropped severely after pass one and then began to improve at higher passes. Fracture test results showed that after the 8th pass, the value of FT improved gradually to the maximum value of 34.3[Formula: see text]MPam[Formula: see text].

Characterization and optimization of desulfurized construction gypsum modified with functionalized nanocellulose

This study focuses on the development and characterization of a novel composite material based on flue gas desulfurization (FGD) gypsum modified with functionalized nanocellulose. The incorporation of 0.1 wt% nanocellulose into the FGD gypsum matrix resulted in significant improvements in mechanical strength, water resistance, and thermal insulation properties. The flexural and compressive strength of the optimized composite increased by 32 % and 27 %, respectively, compared to the control sample. The water absorption decreased by 22 %, and the softening coefficient increased from 0.72 to 0.85, indicating enhanced water resistance. The thermal conductivity of the composite was reduced by 31 %, showcasing its potential as an energy-efficient building material. SEM analysis revealed a refined microstructure with improved interfacial bonding between the nanocellulose and gypsum matrix, while FTIR spectroscopy confirmed the presence of chemical interactions between the components. The moisture buffering capacity of the composite was also superior, with a 38 % higher moisture buffering value than the control sample. These findings highlight the potential of functionalized nanocellulose as a reinforcing agent in FGD gypsum-based composites, offering a promising solution for the development of high-performance, eco-friendly building materials.

Preparation of fine-grained/ultrafine-grained Nb521 alloy with superior mechanical property by friction stir processing

High strength-ductility synergy is difficult to achieve in Nb alloys. Although high strength has been achieved through severe plastic deformation (SPD) technology, led to low ductility in alloys. In this work, FSP technology was applied to treat Nb–5W–2Mo–1Zr-0.1C (Nb521) alloys in preparation of fine-grained (FG)/ultrafine-grained (UFG) Nb521 with excellent strength and ductility. The microstructure evolution and mechanical property improvement mechanism were systematically studied for Nb521 alloy through various characterization pathways. The research results indicated that UFG Nb521 alloy with a grain size of 0.63 ± 0.41 μm can be prepared using low shoulder plunge depth FSP (LPD-FSP), which is the first report of UFG Nb521 alloy. The main reason for the formation of onion rings structure in SZ is the periodic wear of the stirring tool, and the onion rings structure does not cause mechanical damage. The texture formed by Nb521 alloy under different processing parameters is off-axis shear texture, which matches the ideal shear texture of D2 (112‾)[111] after rotation. In addition, this study also elaborated on the refinement mechanism of the second phase particles (Nb, Zr) C in Nb521 alloy during FSP. This study also indicated that the increase in yield strength of FSP samples at room temperature is mainly determined by grain refinement. These findings provided new ideas for the development of high-performance niobium alloys.

Using pulse current to tailor hydride networks while improving the strength and plasticity of pure titanium

Interstitial hydrogen atoms in titanium usually deteriorate the mechanical properties of titanium by brittle hydride phase or hydrogen-enhanced localized plasticity. In this study, hydride was used as the second phase to improve the tensile strength and elongation of TA1 pure titanium. The continuous coarse hydride network is precipitated in TA1 pure titanium after the hydrogen-charged. Then pulse current treatment is used to decompose the original coarse hydride network and reduce the size and number of hydride strips. Finally, a small uniform hydride network is formed in TA1 pure titanium. The results of tensile experiments indicate that the tensile strength of hydrogen-charged TA1 pure titanium treated by pulse current increases from the 286.4 MPa to 316.1 MPa and the elongation increases from the 47.6 % to 56.8 %. The improvement of mechanical properties demonstrate that the small and uniform hydrides can significantly improve the mechanical properties of TA1 pure titanium. In hydrogen-charged TA1 pure titanium treated by pulse current, the increment of strength is mainly caused by hard phase hydrides, and the increase in plasticity is attributed to the role of twins in coordinating deformation during plastic deformation. This study manifests that in addition to being used as a temporary alloying element to optimize the microstructure of titanium, hydrogen can also be directly act as a second phase in titanium to improve the mechanical properties.

Effects of plasma electrolytic polishing on the surface and mechanical properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si specimen fabricated by laser powder bed fusion

The high roughness of titanium alloy specimen fabricated by laser powder bed fusion (LPBF) may limit the application of LPBF technology. Plasma electrolytic polishing (PEP) can effectively reduce the surface roughness of metal samples. In this study, an orthogonal test was designed to investigate the effects of polishing time, voltage and electrolyte temperature on the reduction of roughness and wall thickness of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si specimens fabricated by LPBF. The surface roughness of the specimen decreased from Ra = 49.1 μm to Ra = 9.1 μm and the thickness decreased from 1.72 mm to 1.38 mm after the PEP. Due to the recoil pressure induced by rupture of vapor-gaseous envelope (VGE) and the annealing effect caused by electron impact, the width of α/α' grains on the surface of TC11 specimen decreased from 0.51 μm to 0.46 μm; the mean value of geometrically necessary dislocations (GND) increased by 9.8 %; the proportion of high angle grain boundaries (HAGBs) increased from 75.2 % to 80.8 %; the proportion of twin grain boundary length increased from 2.9 % to 11.9 %, and the activated twin variant type increased from 2 to 4. The number of pores in the samples reduced from 85 to 2 after PEP, which resulted in the improvement of tensile and fatigue properties. The ultimate strength and elongation of the tensile specimens increased by 6.2 % and 53.5 % respectively. The infinite fatigue life maximum stress of the high cycle fatigue specimen increased by 62.5 %. Another reason for the improvement of mechanical properties may be the self-healing of microcracks and the electroplasticity in the specimens.

Effect of interlayer ultrasonic impact on the microstructure, mechanical and corrosion properties of wire arc additive manufacturing AZ31 Mg alloy thin wall

AZ31 Mg alloy thin walls are prepared using wire arc additive manufacturing (WAAM) and interlayer ultrasonic impact (UI) techniques with cold metal transition (CMT) serving as the heat source. The microstructure, mechanical and corrosion properties of thin walls prepared by WAAM and WAAM + UI are studied. Results showed that the recrystallization area fraction along traveling direction (TD) increased by 68.6% after UI treatment, and many fine equiaxed crystals were formed, resulting in grain refinement, anisotropy reduction, mechanical and corrosion properties improvement. The average grain size along TD decreased from 66.6 ± 3.5 μm to 32.7 ± 1.6 μm. Through UI treatment, the ultimate tensile strength (UTS) and elongation (EL) along TD increased from 205 MPa to 230 MPa and 13.5%–17%, respectively. The anisotropic percentage of UTS and EL were decreased from 10.8% to 4.5%, and 42.1%–9.7%, respectively. Electrochemical experimental results showed that the average corrosion rate along TD decreased from 1.93 mm year−1 to 1.53 mm year−1. Grain refinement, dislocation density variation and texture strength reduction were the main reasons for these results.

Functionalization of Graphene Nanosheets-3D Printing Resins for Improvement of Mechanical Properties and Thermal Conductivity

Functionalization of Graphene Nanosheets-3D Printing Resins for Improvement of Mechanical Properties and Thermal Conductivity

Synthesis of bio-polyol-functionalized nanocrystalline celluloses as reactive/reinforcing components in bio-based polyurethane foams by homogeneous environment modification

Nanocrystalline Cellulose (NCC or CNC) is widely used as a filler in polymer composites due to its high specific strength, tensile modulus, aspect ratio, and sustainability.However, CNC hydrophilicity complicates its dispersion in hydrophobic polymeric matrices giving rise to aggregate structures and thus compromising its reinforcing action. CNC functionalization in a homogeneous environment, through silanization with trichloro(butyl)silane as a coupling agent and subsequent grafting with bio-based polyols, is herein investigated aiming to enhance CNC dispersibility improving the filler-matrix interaction between the hydrophobic PU and hydrophilic CNC. The modified CNCs (m_Ci) have been studied by XRD, SEM, and TGA analyses. The TGA results show that the amount of grafted polyol is strongly influenced by both its molar mass and OH number and the maximum amount of grafted polyol reaches up to 0.32 mmol per grams of functionalized CNC, within the explored conditions. The effect of different concentrations (1–3 wt%) of m_Ci on the physical, morphological, and mechanical properties of the resulting bio-based composite polyurethane foams is evaluated. Composite PU foams present compressive modulus up to 4.81 MPa and strength up to 255 kPa more than five times higher than those reinforced with unmodified CNC or with modified CNC in heterogeneous chemical environment. The improvement of mechanical properties of the examined PU foams, as a consequence of the incorporation of bio-polyols modified CNCs where polyol's OH groups interact with polyurethane precursors, could further broaden the use of these materials in building applications.

Evaluation of the performance enhancement of asphalt concrete via graphene oxide incorporation: A multi-test approach

The need for improved asphalt pavements has led to the exploration of nanomaterials such as graphene oxide (GO). This study investigates the potential of GO to enhance the performance of asphalt concrete (AC) with a nominal maximum aggregate size of 12.5 mm (AC_12.5) pavements, a commonly used material in highway construction that has not been extensively studied with GO modification. The main objective is to evaluate the impact of varying GO content (1%, 1.5%, and 2%) on the key technical properties of AC_12.5, including rutting resistance, moisture stability, and tensile capacity. A series of performance tests, including Marshall stability, residual stability, splitting tensile strength, and dynamic modulus, were conducted on AC_12.5 samples with varying GO content. Furthermore, a mechanistic– empirical (M-E) approach was employed to compare the rutting resistance of GO-modified pavements with that of conventional pavements. Initial findings suggest that GO incorporation significantly enhanced the mechanical properties of AC_12.5 compared with the control mixture. Performance tests indicated improved rutting resistance, moisture stability, and tensile capacity. The M– E analysis demonstrated superior rutting resistance in the GO-modified pavement structures. The findings confirm the potential of GO as a promising nanomaterial for enhancing the performance of AC_12.5 pavements. The observed improvements in key mechanical properties and rutting resistance suggest its feasibility for developing more durable, sustainable, and cost-effective roads in the future.

Preparation of Poly(Styrene-co-Acrylonitrile)-Grafted Attapulgite via Simultaneous Reverse and Normal Initiation Atom Transfer Radical Polymerization (SR&NI ATRP) and Its Effect on Polycarbonate/Acrylonitrile-Butadiene-Styrene Terpolymer Ternary Composites

To further improve the comprehensive properties of polycarbonate/acrylonitrile–butadiene–styrene terpolymer blends (PC/ABS), in this work, styrene–acrylonitrile copolymer [P(St-co-An)] was grafted on the surface of attapulgite particles (ATP) by simultaneous reverse and normal initiation ATRP (SR&NI ATRP) to yield ATP@P(St-co-An) hybrid particles. Then a series of PC/ABS/ATP@P(St-co-An) composites were prepared via the melt blending method. The effects of ATP@P(St-co-An) content on the morphological, mechanical, thermal and rheological properties of the composites were investigated in detail. The core-shell ATP@P(St-co-An) hybrid particles with the polymer layer thickness of 20-40 nm were synthesized successfully according to the results of X-ray photoelectron spectrometer (XPS), Fourier transform infrared spectrometer (FTIR), gel permeation chromatography (GPC), thermogravimetric analysis (TGA) and transmission electron microscopy (TEM). The improvement in mechanical properties, reduced glass transition temperature (T g) difference between PC and ABS and micromorphology changes of the composites proved the compatibilization, strengthening, and toughening effect of the ATP@P(St-co-An). Compared with the PC/ABS blend, with strength and toughness of 50.8 MPa and 56.3 kJ/m2, when the ATP@P(St-co-An) content was 4 wt%, a reasonable balance (85.8 MPa and 86.2 kJ/m2) between strength and toughness was achieved with substantially enhanced thermal stability. Moreover, the composite showed more remarkable non-Newtonian behavior, and its processability was also improved. We believe this work provides an effective approach to optimize the compatibility and comprehensive properties of PC/ABS blends.