Mechanical Behavior Of Human Skin Research Articles

The assessment of natural human skin tension orientation and its variation according to age for two body areas: Forearm and thigh

Human skin has a complex multilayer structure consisting of non-homogeneous, non-linear, viscoelastic and anisotropic materials subjected to in vivo natural pre-tension. This natural tension stems from networks of collagen and elastin fibers. The 3D organization of the collagen and elastin fibers underpins the multidirectional natural tensions in the skin volume while the state of the networks formed influences the surface topography of the skin. This topography depends on the area of the body and on the age of the person. Experiments reported in the literature have been performed ex vivo or on cadavers. By contrast, this work proposes the characterization of the anisotropic natural tension of the human skin in vivo.Experimental tests were performed on the forearms and thighs of 42 female volunteers representing two age groups [20 - 30] and [45–55] years old. Non-contact impact tests and skin-folding tests were conducted using devices developed at the LTDS (Lyon, France). The impact test generated a Rayleigh wave that spread in the skin. The speed of this wave was measured in 7 directions to study the anisotropy of the skin tension. The image of the skin relief at rest and during the skin folding test was reconstructed by optical confocal microscopy and provided the density of the skin lines printed on the outer surface of the skin. Skin folding test enables the clinician's manual procedure to be instrumented to identify tension lines i.e., Langer lines, for better healing during a surgical procedure.The main directions of natural skin tension deduced from the measured wave speed and the densities of skin lines were [40°–60°] for the forearm and [0°–20°] for the thigh, considering that the longitudinal axis of the body is situated at 90° and the transversal axis at 0°.This method shows the remarkable effect of age and body area on the mechanical behavior of human skin in vivo. The elastic properties and natural tension of the skin decrease with age. This decrease is greater in the directions orthogonal to the skin’s tension lines, leading to the accentuation of the anisotropic behavior of the cutaneous tissue. The main direction of skin tension is highly dependent on the area of the body and is directed towards a preferred direction which corresponds to the main direction of skin tension.

A biphasic multilayer computational model of human skin

The present study investigates the layer-specific mechanical behavior of human skin. Motivated by skin’s histology, a biphasic model is proposed which differentiates between epidermis, papillary and reticular dermis, and hypodermis. Inverse analysis of ex vivo tensile and in vivo suction experiments yields mechanical parameters for each layer and predicts a stiff reticular dermis and successively softer papillary dermis, epidermis and hypodermis. Layer-specific analysis of simulations underlines the dominating role of the reticular dermis in tensile loading. Furthermore, it shows that the observed out-of-plane deflection in ex vivo tensile tests is a direct consequence of the layered structure of skin. In in vivo suction experiments, the softer upper layers strongly influence the mechanical response, whose dissipative part is determined by interstitial fluid redistribution within the tissue. Magnetic resonance imaging-based visualization of skin deformation in suction experiments confirms the deformation pattern predicted by the multilayer model, showing a consistent decrease in dermal thickness for large probe opening diameters.

Methods for characterizing the anisotropic behavior of the human skin’s relief and its mechanical properties in vivo linked to age effects

Human skin has a complex multilayer structure consisting of non-homogeneous, non-linear, viscoelastic, anisotropic materials subjected to in vivo pre-tension. This natural tension is due to the networks of collagen and elastin fibers in the skin. The three-dimensional (3D) organization of the collagen and elastin fibers initiates the multidirectional natural tensions in the skin volume. The state of these networks influences the surface topography of the skin which depends on the area of the body and on the age of the person. This work presents two experimental methods for characterizing the anisotropic behavior of human skin and its natural tension in vivo by measuring the Rayleigh wave propagation speed in the skin and analyzing the relief of the latter. All the tests were performed on the forearm of 11 female volunteers representing two age groups: [23–28] and [39–54] years old. Non-contact impact tests were conducted, and skin replicas taken using new experimental devices. The non-contact impact test generated a Rayleigh wave that spread in the skin. The speed of this wave was measured in 7 directions and permitted quantifying the main directions of propagation. The image of the skin relief was reconstructed by optical confocal microscopy which allows analyzing the micro-relief of the skin’s surface. This enabled quantifying the main directions of the skin lines. The comparison of the two methods highlights the link existing between the surface topography and the 3D organization of the fiber networks. Moreover, these methods showed the remarkable effect of age on the mechanical behavior of human skin in vivo. These mechanical properties and the natural tension of skin decrease with age. Anisotropic behavior becomes more marked with age. The main directions of skin tension were oriented in preferred directions that corresponded to the direction of Langer’s lines. These directions were [20°–60°] and [120°–140°] for the young group, and [20°–60°] for the older group.

Super soft but strong E-Skin based on carbon fiber/carbon black/silicone composite: Truly mimicking tactile sensing and mechanical behavior of human skin

Besides the prominent tactile sensing ability, human skin is also well known for its unique mechanical behavior – combination of excellent softness with certain stretchability of a strain-limiting effect to prevent damage from excessive strain. Here a stretchable e-skin truly mimicking the tactile sensing and mechanical behavior of human skin is fabricated. Carbon black (CB)/silicone composite with excellent piezo-resistive performance is employed as mechanical stimuli sensing material, which provides super softness, large stretchability, high strain sensitivity and long-term reliability for the e-skin. High performance carbon fiber (CF) with quasi-sinusoidal shape is designed to serve as electrode material and reinforcement filler simultaneously, which renders the e-skin a typical J-shape stress-strain curve similar as that of human skin. The Young's modulus, tensile strength and failure strain of the e-skin can be readily adjusted by controlling the content and shape of the CF electrode to match them well with those of human skin. Finally, the fabricated e-skin exhibits the capability of spatiotemporal recognition of the location and magnitude of contact forces in monitoring dynamic stress distribution. The as-prepared stretchable e-skin based on CF/CB/silicone composite is highly promising for robotics and prosthetics, etc.

A model of human skin under large amplitude oscillatory shear

Skin mechanics is of importance in various fields of research when accurate predictions of the mechanical response of skin is essential. This study aims to develop a new constitutive model for human skin that is capable of describing the heterogeneous, nonlinear viscoelastic mechanical response of human skin under shear deformation. This complex mechanical response was determined by performing large amplitude oscillatory shear (LAOS) experiments on ex vivo human skin samples. It was combined with digital image correlation (DIC) on the cross-sectional area to assess heterogeneity. The skin is modeled as a one-dimensional layered structure, with every sublayer behaving as a nonlinear viscoelastic material. Heterogeneity is implemented by varying the stiffness with skin depth. Using an iterative parameter estimation method all model parameters were optimized simultaneously. The model accurately captures strain stiffening, shear thinning, softening effect and nonlinear viscous dissipation, as experimentally observed in the mechanical response to LAOS. The heterogeneous properties described by the model were in good agreement with the experimental DIC results. The presented mathematical description forms the basis for a future constitutive model definition that, by implementation in a finite element method, has the capability of describing the full 3D mechanical behavior of human skin.

Wave propagation as a marker of structural and topographic properties of human skin

Chronological skin ageing is a phenomenon which imposes structural and functional changes on the cutaneous tissue. Mechanically, these changes can be related to structural rearrangements of the cutaneous tissue on surface and in volume (layers thickness). At the micro-structural level, the constitutional elements of the skin, collagen and elastin fibres, undergo also this rearrangement. The evolution of skin’s mechanical properties at this level is the origin of a primordial in-vivo mechanical characteristic known as the natural pretension. In the context of understanding the in-vivo skin mechanical behaviour, related to the natural pretension, a lot of instrumentations have been demonstrated in the literature. They are mainly based on the interaction between dynamic adapted solicitation and the observed reaction on the skin. In this study, we evaluate the mechanical behaviour of human skin, following an impact which induces wave propagation. The use of impact solicitation allows the direct correlation between the dynamic induced reaction (vibration, and wave propagation) of the cutaneous tissue and its mechanical property. In our development, impact solicitation is contactless, with an air blast as generator of local deformation. The estimation of the speed of wave propagation enables the characterization of the mechanical behaviour of the skin. In order to validate the developed approaches, to understand the chronological ageing, gender and anisotropy effects on the skin properties, measurements have been realized on 77 healthy volunteers separated in five age groups. The obtained results are consistent with earlier works and confirm the efficiency of the developed instrumentation to estimate the changes of mechanical behaviour of the skin under age and gender effects.

Experimental study on tissue phantoms to understand the effect of injury and suturing on human skin mechanical properties.

Skin injuries are the most common type of injuries occurring in day-to-day life. A skin injury usually manifests itself in the form of a wound or a cut. While a shallow wound may heal by itself within a short time, deep wounds require surgical interventions such as suturing for timely healing. To date, suturing practices are based on a surgeon's experience and may vary widely from one situation to another. Understanding the mechanics of wound closure and suturing of the skin is crucial to improve clinical suturing practices and also to plan automated robotic surgeries. In the literature, phenomenological two-dimensional computational skin models have been developed to study the mechanics of wound closure. Additionally, the effect of skin pre-stress (due to the natural tension of the skin) on wound closure mechanics has been studied. However, in most of these analyses, idealistic two-dimensional skin geometries, materials and loads have been assumed, which are far from reality, and would clearly generate inaccurate quantitative results. In this work, for the first time, a biofidelic human skin tissue phantom was developed using a two-part silicone material. A wound was created on the phantom material and sutures were placed to close the wound. Uniaxial mechanical tests were carried out on the phantom specimens to study the effect of varying wound size, quantity, suture and pre-stress on the mechanical behavior of human skin. Also, the average mechanical behavior of the human skin surrogate was characterized using hyperelastic material models, in the presence of a wound and sutures. To date, such a robust experimental study on the effect of injury and sutures on human skin mechanics has not been attempted. The results of this novel investigation will provide important guidelines for surgical planning and validation of results from computational models in the future.

Finite element analysis to determine stress fields at the apex of V-Y flaps

After performing a V-Y advancement flap, we observed an unusually shaped necrosis, resembling a keyhole at the apex of the flap. As high closing tensions are an accepted cause of skin necrosis, we developed a mathematical model based on the finite element analysis in order to determine the stress field by simulating the mechanical behavior of human skin during suture and to explain this particular shape of necrosis. For the modeling, a planar nonlinear two-dimensional finite element model was used. The numerical simulation was carried out with Ansys® v12 software. Results are expressed in numerical and graphic form. The shape of the vertical iso-stress line for a stress equal to 18.8 kPa was similar to the necrosis observed in our clinical case. Similarities between the shape of necrosis and the calculated stress field at the apex of the V-Y advancement flap indicate the major role of skin tension in this necrosis. Finite element analysis is an original approach for describing the particular shape of a necrosis. Although many factors can be implicated in skin necrosis, the modeling confirms the role of tension in the necrosis of this particular case. Level of Evidence: Level V, risk/prognostic study

Development of a Synthetic Skin Simulant Platform for the Investigation of Dermal Blistering Mechanics

Excessive frictional loading to the skin often results in the formation of blisters, due to the transmission of shear loading to the interfaces between dermal cell strata. The consequences of blistering range from mild discomfort to serious infection. In some patients, such as those disposed to epidermolysis bullosa or neuropathic diabetes, blisters can severely degrade life quality. Investigation of environmental and application parameters that affect blister formation has occurred primarily as a qualitative, observational pursuit on human subjects, which has often led to confounding of data and lack of repeatability. The authors have developed a Synthetic Skin Simulant Platform (3SP) that reproduces the mechanical behavior of human skin when exposed to tribological loading. The platform is an assembled construct of bonded elastomeric layers that act as surrogates for the epidermis, basement membrane, dermis, and subdermal structure. Epidermal (top layer) materials are typically silicone or polyurethane films with a friction coefficient akin to human skin, while sublayers display mechanical properties similar to their anatomical analogs. Blistering is evident optically by examining the separation voids formed after applying shear loads to the epidermal layer. The 3SP has been used in a two-axis pin-on-flat tribometer with a stainless steel indenter to study the normal load and friction coefficients encountered at the onset of frictional blistering. The 3SP allows for modulation of friction coefficient, interfacial adhesion strength, and subdermal stiffness for investigation of blistering damage to various anatomical sites. Experimental results have been compared to human test data and have shown that the 3SP provides the potential to make significant advances with respect to skin tribology research.

Characterization of the mechanical behavior of human skin by means of impedance spectroscopy

There is increased interest for the use of impedance spectroscopy to measure skin dielectric properties in vivo. The aim of such measurements can be either to evaluate the hydration state of the skin, to detect diseased states such as skin cancer, to follow the progress of transdermal drug delivery, or simply to gather data on skin tissue impedance to be used in theoretical studies. However, obtaining reliable data can be difficult. Namely, skin is a highly nonhomogeneous multi-layered structure whose composition and dimensions differ depending on the location on the body and interindividual variations. Also, impedance measurements on skin are accompanied by a number of artefacts. We performed a series of impedance measurements using an Agilent/HP 4284A precision LCR meter with parallel plate electrodes pressed on the skin, at different locations on the body. We observed substantial impedance changes over the course of the measurement. These changes can be mainly attributed to skin deformation caused by the electrodes pressing against skin. The analysis showed that skin mechanical properties and layer thicknesses can be inferred from these temporal changes. Such data on mechanical properties of skin tissue give valuable extra information, crucial for successful estimation of the impedance of different skin layers.

Viscoelastic response of human skin to low magnitude physiologically relevant shear

Percutaneous implants are a family of devices that penetrate the skin and all suffer from the same problems of infection because the skin seal around the device is not optimal. Contributing to this problem is the mechanical discontinuity of the skin/device interface leading to stress concentrations and micro-trauma that chronically breaks any seal that forms. In this paper, we have quantified the mechanical behavior of human skin under low-magnitude shear loads over physiological relevant frequencies. Using a stress-controlled rheometer, we have performed isothermal (37 °C) frequency response experiments between 0.628 and 75.39 rad/s at 0.5% and 0.04% strain on whole skin and dermis-only, respectively. Step-stress experiments of 5 and 10 Pa shear loads were also conducted as were strain sweep tests (6.28 rad/s). Measurements were made of whole human skin and skin from which the epidermis was removed (dermis-only). At low frequencies (0.628–10 rad/s), the moduli are only slightly frequency dependent, with approximate power-law scaling of the moduli, G′∼ G″∼ ω β , yielding β=0.05 for whole skin and β=0.16 for dermis-only samples. Step-stress experiments revealed three distinct phases. The intermediate phase included elastic “ringing” (damped oscillation) which provided new insights and could be fit to a mathematical model. Both the frequency and step-stress response data suggest that the epidermis provides an elastic rigidity and dermis provides viscoelasticity to the whole skin samples. Hence, whole skin exhibited strain hardening while the dermis-only demonstrated stress softening under step-stress conditions. The data obtained from the low-magnitude shear loads and frequencies that approximate the chronic mechanical environment of a percutaneous implant should aid in the design of a device with an improved skin seal.

Estimating material parameters of human skin in vivo

An accurate mathematical representation of the mechanical behaviour of human skin is essential when simulating deformations occurring in the skin during body movements or clinical procedures. In this study constitutive stress-strain relationships based on experimental data from human skin in vivo were obtained. A series of multiaxial loading experiments were performed on the forearms of four age- and gender matched subjects. The tissue geometry, together with recorded displacements and boundary forces, were combined in an analysis using finite element modelling. A non-linear optimization technique was developed to estimate values for the material parameters of a previously published constitutive law, describing the stress-strain relationship as a non-linear anisotropic membrane. Ten sets of material parameters where estimated from the experiments, showing considerable differences in mechanical behaviour both between individual subjects as well as mirrored body locations on a single subject. The accuracy of applications that simulate large deformations of human skin could be improved by using the parameters found from the in vivo experiments as described in this study.

The relative contributions of different skin layers to the mechanical behavior of human skin in vivo using suction experiments

Although the mechanical behavior of the top layer of the skin, the epidermis, is an important consideration in several clinical and cosmetic applications, there are few reported studies on this layer. The in vivo mechanical behavior of the upper skin layer (here defined as epidermis and papillar dermis) was characterized using a combined experimental and modeling approach. The work was based on the hypothesis that experiments with different length scales represent the mechanical behavior of different skin layers. Suction measurements with aperture diameters of 1, 2 and 6 mm were combined with ultrasound and optical coherence tomography to study the deformation of the skin layers. The experiments were simulated for small displacements with a two-layered finite element model representing the upper layer and the reticular dermis. An identification method compared the experimental and numerical results to identify the material parameters of the model. For one subject the whole parameter estimation procedure was completed, leading to a stiffness of C 10,ul = 0.11 kPa for the top-layer and C 10,rd = 0.16 MPa for the reticular dermis. This unexpected, extreme stiffness ratio of the material parameters let to convergence problems of the finite element software for most of the individuals.

Nonlinear model of skin mechanical behaviour analysis with finite element method.

A problem commonly encountered in plastic and reconstructive surgery is the prediction of the stress put on the skin when various types of skin flaps are used. We developed a mathematical model based on the finite element method, in order to determine the stress field, by simulating the mechanical behaviour of human skin during wound closure. We chose to take into account the low compressive strength by modifying the mechanical parameters of the model at each step of the calculation. The model has been developed and tested on a diamond-shaped incision and applied on a Limberg incision. The results presented are the Von Mises stress in the area of skin around the scar and, when possible, the resultant closure force. They show the relevance of the method.

Characterisation of Anisotropic and Non-linear Behaviour of Human Skin In Vivo

The aim of this work is to characterise the in-plane mechanical behaviour of human skin in vivo. For this purpose the structural skin model proposed by Lanir [I] is employed and a mixed numerical-experimental method is developed. The numerical-experimental method is based on the confrontation of measured data from an experiment, with calculated data from a finite element model, eventually leading to the determination of some of the parameters of a constitutive model, in the present case Lanir's Skin Model. Since collagen, the main constituent of skin, dominates the anisotropic and non-linear behaviour of skin, the parameters of Lanir's Skin Model concerning the mechanical behaviour of the collagen fibres are estimated. In vivo experiments were carried out on the volar forearm. During the experiments, reaction forces and the displacement field at different states of deformation are measured. Both data sets are used for the determination of the parameters.

Dynamic mechanical testing of human skin ‘ in vivo’

The problems involved in measurement of the dynamic mechanical properties of human skin in vivo are examined. On the basis of these observations, the design of a rotary position servo for in vivo testing is outlined. Using this device, certain hitherto unidentified characteristics of the mechanical behaviour of human skin are illustrated.